Related
EDIT: RIGHT AFTER POSTING, MY PHONE RANDOMLY STARTED WORKING. I HAVE NO IDEA WHAT I DID BESIDES POST HERE. MAGIC.
I installed Cyanogen version 7.2.0 just fine using the guide that was found here: http://www.mrmuh.com/2012/01/update-a-motorola-milestone-from-motorola-firmware-to-cyanogenmod-7/
However, the next morning I think I enabled the 2g/3g switch widget - and then my phone entered into a constant and continuous loop of "com.android.phone has unexpectedly closed" - and couldn't connect to cell service.
In a panic, I searched everywhere for fixes. I then tried a few of the fixes which instructed you to download "sqlite editor" and do some edits to the settings file. I did this, along with a couple of other network edits, resetting them to "0" instead of the "1" they were currently set to. No help.
Finally, I went into the Open Recovery system and did a full reset on cache/factory reset/etc. and then rebooted into cyanogen. Now my network won't even connect for a half a second and then crash like before - just straight up NO CONNECTION.
Now I've went through and attempted changing back some of those settings I messed around with in Sqlite - but to no avail.
Anyone with any ideas on how I can get an operating phone again, please let me know. I noticed I still have all my apps from previously, so I don't think I'm really factory resetting the phone. That could be part of the issue, I'm sure....I am very depressed and hoping for a miracle!!
Look into installing minimod recovery and then flashing the correct radio for your location after a full wipe.
If you do a google search you should find minimod. I'm on my phone or I would just link you.
Sent from my Milestone using XDA App
OK Thanks for your reply.
However, randomly, just after I posted this - I looked down and my phone had a full 2G Connection. Went into baseband settings, enabled 850 band 3G, and now I have full 3G connectivity.
I have no clue how this happened. XDA forum is magical?
Thanks again for your reply, but thankfully I don't need the minimod suggestion as of now!!
You're welcome. You might want to go ahead and install minimod though. I made the mistake of not having it installed and flashed a new rom without the ability to select bands and was without a phone all day. It's better safe than sorry.
redsrule2500 said:
OK Thanks for your reply.
However, randomly, just after I posted this - I looked down and my phone had a full 2G Connection. Went into baseband settings, enabled 850 band 3G, and now I have full 3G connectivity.
I have no clue how this happened. XDA forum is magical?
Thanks again for your reply, but thankfully I don't need the minimod suggestion as of now!!
Click to expand...
Click to collapse
jhealy said:
You're welcome. You might want to go ahead and install minimod though. I made the mistake of not having it installed and flashed a new rom without the ability to select bands and was without a phone all day. It's better safe than sorry.
Click to expand...
Click to collapse
Good call. I'm just quite happy this is working now, but you are right, don't want that doomsday feeling again. Thanks
im having the same problem here :// i only can get cellNetwork if i restart with airplane mod.. then after i rebooted i go back to normal 3G/2G mode but otherwise i dnt get cell signal// also seems like wifi has some bugs im using HOHO CM7
Do a fresh install of HONO through minimod recovery.
marwan91 said:
im having the same problem here :// i only can get cellNetwork if i restart with airplane mod.. then after i rebooted i go back to normal 3G/2G mode but otherwise i dnt get cell signal// also seems like wifi has some bugs im using HOHO CM7
Click to expand...
Click to collapse
Sent from my Milestone using XDA App
jhealy said:
Do a fresh install of HONO through minimod recovery.
Sent from my Milestone using XDA App
Click to expand...
Click to collapse
i did.. still the same problem ^^
Did you install the correct radio?
Sent from my Milestone using XDA App
Go download a apndroid.apk Google it.
that happened to me too
I did a full wipe and flashed the CM10.1 nightly released for the d2vzw this morning. When it rebooted I had no cell service. Looking in settings i have the proper IMEI number but my cell number is listed as 000-000-1361, MIN is 1361, PRL is 1. what can I do to fix it? I tried restoring a nandroid but the result is the same. Any help would be greatly appreciated!
RESOLVED
james3kral said:
I did a full wipe and flashed the CM10.1 nightly released for the d2vzw this morning. When it rebooted I had no cell service. Looking in settings i have the proper IMEI number but my cell number is listed as 000-000-1361, MIN is 1361, PRL is 1. what can I do to fix it? I tried restoring a nandroid but the result is the same. Any help would be greatly appreciated!
Click to expand...
Click to collapse
Okay so i believe this was my fault for flashing the latest cm 10.1 nightly with my build.prop edited to galaxy nexus values to allow google wallet functionality. removing sim card, starting phone, shutting down phone, inserting sim card, and starting phone fixed the problem
james3kral said:
Okay so i believe this was my fault for flashing the latest cm 10.1 nightly with my build.prop edited to galaxy nexus values to allow google wallet functionality. removing sim card, starting phone, shutting down phone, inserting sim card, and starting phone fixed the problem
Click to expand...
Click to collapse
I ran into the same problem but after trying you fix I still have no service. ?????
TheBurgh said:
I ran into the same problem but after trying you fix I still have no service. ?????
Click to expand...
Click to collapse
I am having the same problem. The phone wont still activate. Please help!!
james3kral said:
Okay so i believe this was my fault for flashing the latest cm 10.1 nightly with my build.prop edited to galaxy nexus values to allow google wallet functionality. removing sim card, starting phone, shutting down phone, inserting sim card, and starting phone fixed the problem
Click to expand...
Click to collapse
Any one try Odin back to stock?
I have a similar issue and I have been going around and around with it without any luck. I restored my latest backup and I still have 000-000-3257 with a PRL of 1. I will try the ops recommendation and will report back.
Odin to stock is my next move unless someone else can think of something else to try.
Try clearing dalvik cache in recovery. Fixed it for me on AOKP. Had the exact same thing where my phone number was a bunch of zeroes. Still had service though when I hit the home button to bypass the activation screen.
Sent from my SCH-I535 using Tapatalk 2
I tried to remove the sim, and boot, and readd the sim and boot but no go. I will try it again but then I think I am going back to stock to see if that works.
Everything still works fine. No need to get worried......it just doesn't report your phone number accurately. Its not like it actually effects functionality. I ran it with an f'ed phone number for 3 days. Everything ran fine. Don't sweat it. If its a problem, wait until tomorrows official nightly comes out tonight and you'll be set.
TechSavvy2 said:
Everything still works fine. No need to get worried......it just doesn't report your phone number accurately. Its not like it actually effects functionality. I ran it with an f'ed phone number for 3 days. Everything ran fine. Don't sweat it. If its a problem, wait until tomorrows official nightly comes out tonight and you'll be set.
Click to expand...
Click to collapse
My issue is it is affecting my functionality. My phone is not working and whenever I call out I get a generic message saying my phone is not active.
I restored a backup from when I first rooted. Now my phone number is listed properly and when I get into a 4G coverage area I can get data, but I still can't call out and it shows I am roaming when I am in a 3G area.
OP on CM10.1 says that dirty flashing Unofficial 10.1 build 12/17/12 will restore data. Any luck with this fix?
Sent from my SCH-I535 using xda app-developers app
dknell said:
OP on CM10.1 says that dirty flashing Unofficial 10.1 build 12/17/12 will restore data. Any luck with this fix?
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
you can try that or mastamoons both have been reported to work
mastamoon said:
Here is my unofficial 10.1 build as of 3:00pm EST.
Has working data and increased MMS picture size mod. Otherwise is stock CM10.1
http://bit.ly/12yrtcw
Click to expand...
Click to collapse
Droosh said:
Thanks for sharing! I did a full data wipe and installed this and it activated right away.
Click to expand...
Click to collapse
I was very unlucky and the dirty flash didnt work for me. However, I did have a backup of my IMEI and was able to flash it back to my phone.
I ran into the same problem after flashing 10.1... lost IMEI and stuck on roaming, had no backup.
To fix it i did the following
1) Odin back to stock
2) use this tool http://forum.xda-developers.com/showthread.php?t=1867442
3) reprovish the phone using this code in the dialer *2767*3855#
IMEI restored and no longer on roaming
brandao.gabe said:
I ran into the same problem after flashing 10.1... lost IMEI and stuck on roaming, had no backup.
To fix it i did the following
1) Odin back to stock
2) use this tool http://forum.xda-developers.com/showthread.php?t=1867442
3) reprovish the phone using this code in the dialer *2767*3855#
IMEI restored and no longer on roaming
Click to expand...
Click to collapse
THANK YOU!. I could not get the IMEI/ERI tool to work, but I did get *2767*3855# code to work. I had to roll back to a older version of the official rom (I think rolling back the radio would have been OK) but I am not up and working.
fowen said:
THANK YOU!. I could not get the IMEI/ERI tool to work, but I did get *2767*3855# code to work. I had to roll back to a older version of the official rom (I think rolling back the radio would have been OK) but I am not up and working.
Click to expand...
Click to collapse
I flashed back to stock as well and then used the same number to reprovision. After that everything worked fine it fixed the roaming, incorrect number, PRL, and all. I never lost my IMEI so I didnt do that step. but if you flash back to the cm 10.1 before they fix the data it will happen again :laugh:
Please read forum rules before posting
Questions go in Q&A
Thread moved
Just change CDMA subscription to ruim/sim and toggle airplane mode...
I've never found a reason to have to Odin to anything.
Sent from my SCH-I535 using xda app-developers app
ajrty33 said:
Just change CDMA subscription to ruim/sim and toggle airplane mode...
I've never found a reason to have to Odin to anything.
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
I can't remember for sure, but I think that is something that the VZW tech had me do, and it didn't work. Maybe someone else who is having the issue can test and comment.
ajrty33 said:
Just change CDMA subscription to ruim/sim and toggle airplane mode...
I've never found a reason to have to Odin to anything.
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
This fixed it for me! Thank you very much!
Sent from an unlocked Galaxy S 3! Screw you Verizon!
Hi I posted this on another forum but got no solution. Thought I would re-post here to see if anyone here can help.
I've been trying to figure this one out all day. I updated to Cyanogenmod 10.1 from 10 and since the upgrade I've lost my net work. My service bars are there with the roaming notification. I can't make calls or connect to data. I've done the following to try to fix:
Restored from backup
flashed different radios
Odin restore to stock (Jellybean)
Odin restore to original stock
Rerooted
Unlocked bootloader
Flashed cyanogenmod
I've also repaired my ERI using the Samsung repair tool.
After all this I have gotten no where so I must ask for advise. Along with flashing I've done complete factory resets as well. Any thoughts? Thanks
Did you even try looking at ops whole page for help?
Sent from my SCH-I535 using xda app-developers app
If your back to stock then type this in to ur dialer *2767*3855# the same thing happened to me and that fixed it
Sent from my SCH-I535 using xda app-developers app
Thanks for the reply, I was back onto jelly bean so the dialer code didn't work. I'm flashing back to ICS and I'll give it a try.
Please read forum rules before posting
Questions go in Q&A
Thread moved
Thank you for your cooperation
Friendly Neighborhood Moderator
devonburns20 said:
If your back to stock then type this in to ur dialer *2767*3855# the same thing happened to me and that fixed it
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
This worked thank you.
schnyd said:
This worked thank you.
Click to expand...
Click to collapse
alright, this is getting very frustrating. I'm having the same stupid problem being stuck in roaming/no data. The only solution I find to fix this problem is to go to stock and then dial *2767*3855#....I flashed to stock, I try the number, but am then told by the operator that if I wan't to place a call, I need a credit card blah blah blah blah. Seriously, let's get a solution to this.
Jborch8 said:
alright, this is getting very frustrating. I'm having the same stupid problem being stuck in roaming/no data. The only solution I find to fix this problem is to go to stock and then dial *2767*3855#....I flashed to stock, I try the number, but am then told by the operator that if I wan't to place a call, I need a credit card blah blah blah blah. Seriously, let's get a solution to this.
Click to expand...
Click to collapse
this is not the only solution. after u flash CM10.1 If you remove ur sim card and boot up and connect via wifi, u can then register and set up the phone. then shut down put sim card back in and boot up. go to system settings -> More... under wireless and networks -> mobile networks -> CDMA subscription and choose RUIM/SIM (NOT NV)
This should now let the ur phone have access to the network and get rid of the roaming issue.
Thanks
rossida said:
this is not the only solution. after u flash CM10.1 If you remove ur sim card and boot up and connect via wifi, u can then register and set up the phone. then shut down put sim card back in and boot up. go to system settings -> More... under wireless and networks -> mobile networks -> CDMA subscription and choose RUIM/SIM (NOT NV)
This should now let the ur phone have access to the network and get rid of the roaming issue.
Click to expand...
Click to collapse
I searched everywhere to find a the stock 4.04 rom (that wasn't a zip) I could odin in and fix and I had already gone back to the stock 4.1.1 - I didn't know about 4.0 at the time. When I saw your post, I flashed on slimbean 4.3 and before booting I removed the sim, checked the RUIM box, rebooted and profited. Thanks for the post.- even if it was about a year old...
So...I went ahead and flashed the Dec 24th official 10.1 release with data working. I flashed with TWRP and it went smoothly. I couldn't activate the phone because it was stuck in roaming. I tried what ever I could do but could not get out of it. So I resorted back to full stock from verizon locking and un-rooting. Did that and I also flashed a stock radio. Still cannot get out of roaming mode.
Any suggestions? Kind of in desperate need of data to get a working phone!
Thanks in advance. I'm sure this problem has come up among many of you.
996 said:
So...I went ahead and flashed the Dec 24th official 10.1 release with data working. I flashed with TWRP and it went smoothly. I couldn't activate the phone because it was stuck in roaming. I tried what ever I could do but could not get out of it. So I resorted back to full stock from verizon locking and un-rooting. Did that and I also flashed a stock radio. Still cannot get out of roaming mode.
Any suggestions? Kind of in desperate need of data to get a working phone!
Thanks in advance. I'm sure this problem has come up among many of you.
Click to expand...
Click to collapse
Yes. It's come up many, many times.
Flash the latest cm 10.1 and fix the mobile settings.
Sent from my SCH-I535 using xda app-developers app
ajrty33 said:
Yes. It's come up many, many times.
Flash the latest cm 10.1 and fix the mobile settings.
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
I thought flashing "[OFFICIAL]CM10.1 Official Nightlies for D2VZW GSIII (12/24 Official Data Works)" was the latest one. How would I go about "fixing" the mobile settings? via the settings menu? I cannot access that menu if I need to go there. I need to get past the activation screen. Also I am not so sure on performing the four corners trick in order to get past that screen.
thanks
996 said:
I thought flashing "[OFFICIAL]CM10.1 Official Nightlies for D2VZW GSIII (12/24 Official Data Works)" was the latest one. How would I go about "fixing" the mobile settings? via the settings menu? I cannot access that menu if I need to go there. I need to get past the activation screen. Also I am not so sure on performing the four corners trick in order to get past that screen.
thanks
Click to expand...
Click to collapse
odin back to VRALG1 and then reprovision with dialer code *2767*3855#
droidstyle said:
odin back to VRALG1 and then reprovision with dialer code *2767*3855#
Click to expand...
Click to collapse
Gotcha. Did it and it seems to be fine now. Many thanks! Now I am hesitating going back to 10.1. I think i'll just stick to CM10 for now. until such time everything gets fixed.
droidstyle said:
odin back to VRALG1 and then reprovision with dialer code *2767*3855#
Click to expand...
Click to collapse
Can you elaborate on this?
996 said:
So...I went ahead and flashed the Dec 24th official 10.1 release with data working. I flashed with TWRP and it went smoothly. I couldn't activate the phone because it was stuck in roaming. I tried what ever I could do but could not get out of it. So I resorted back to full stock from verizon locking and un-rooting. Did that and I also flashed a stock radio. Still cannot get out of roaming mode.
Any suggestions? Kind of in desperate need of data to get a working phone!
Thanks in advance. I'm sure this problem has come up among many of you.
Click to expand...
Click to collapse
i just posted a fix topic for this but here this is how i got mine to work after flashing CM10.1 the 12/24
If you remove ur sim card and boot up and connect via wifi, u can then register and set up the phone. then shut down put sim card back in and boot up. go to system settings -> More... under wireless and networks -> mobile networks -> CDMA subscription and choose RUIM/SIM (NOT NV)
rossida said:
i just posted a fix topic for this but here this is how i got mine to work after flashing CM10.1 the 12/24
If you remove ur sim card and boot up and connect via wifi, u can then register and set up the phone. then shut down put sim card back in and boot up. go to system settings -> More... under wireless and networks -> mobile networks -> CDMA subscription and choose RUIM/SIM (NOT NV)
Click to expand...
Click to collapse
hmm sounds like it might work for me! but do you get full 4G? and good radio coverage like the touchwiz roms?
996 said:
hmm sounds like it might work for me! but do you get full 4G? and good radio coverage like the touchwiz roms?
Click to expand...
Click to collapse
i couldnt tell u sadly... where i am now i dont get 4g. 3g works fine. only had it flashed for 2 hours and been messing around with it. a couple of phone calls and text messages and doesnt seem like its dropping signal at all. but the solution i posted works just fine. if u dont want to try it just wait for the next release...
996 said:
Gotcha. Did it and it seems to be fine now. Many thanks! Now I am hesitating going back to 10.1. I think i'll just stick to CM10 for now. until such time everything gets fixed.
Click to expand...
Click to collapse
Flash cm10.1 again but this time go into settings/networks/cdma subs and select ruim/sim. Reboot
Sent from my SCH-I535 using xda app-developers app
Laramie1997 said:
Can you elaborate on this?
Click to expand...
Click to collapse
I didnt see a responce from here but ill do my best, flash back to the stock ROM using ODIN and you should be put back into the operating system still in roaming mode then you dial *2767*3855# as soon as you hit the # your phone will download a file and re-provision itself which will fix the roaming error.
Hi, I've been using packet data on my phone (Samsung Galaxy Ace Plus S7500) with stock firmware ever since I go my phone.
I've been trying to install CyanogenMod 10.1 for 3 days, and I can not get packet data to work; I have created the APN as should be for my network provider, but nothing happens; it looks like the phone does not even try connecting to the 3G APN.
Is there anything specifc to be done in order to get packet data working again?
rcplktb said:
Hi, I've been using packet data on my phone (Samsung Galaxy Ace Plus S7500) with stock firmware ever since I go my phone.
I've been trying to install CyanogenMod 10.1 for 3 days, and I can not get packet data to work; I have created the APN as should be for my network provider, but nothing happens; it looks like the phone does not even try connecting to the 3G APN.
Is there anything specifc to be done in order to get packet data working again?
Click to expand...
Click to collapse
i have also this issue b4, on CM10.1.2 my mobile internet is working very stable at first but drop after several hours. in signal bar it was E sign instead of H like on first flash. check my post on OP page 213 #2130
http://forum.xda-developers.com/showthread.php?t=2201821&page=213
press thanks if i help!
ANDROID-000 said:
i have also this issue b4, on CM10.1.2 my mobile internet is working very stable at first but drop after several hours. in signal bar it was E sign instead of H like on first flash. check my post on OP page 213 #2130
http://forum.xda-developers.com/showthread.php?t=2201821&page=213
press thanks if i help!
Click to expand...
Click to collapse
I had seen that post of yours already and I had tried it, in vain. Mine seems to be a different problem altogether; it looks like my phone does not even try connecting through the packet data APN for some reason.
When I'm on that screen (*#*#4636#*#* --> Phone Info), there's a field in there which says "Data Attempts: 0". I even tried accessing the menu on that screen, and there was "Enable data connection", I thought that would do the trick, but nada!
Is there some way I can debug this to see why the phone is not using the Data APN?
Ah, by the way, I have also tried with CM-10, same problem. When I revert back to stock firmware, works perfectly.
rcplktb said:
I had seen that post of yours already and I had tried it, in vain. Mine seems to be a different problem altogether; it looks like my phone does not even try connecting through the packet data APN for some reason.
When I'm on that screen (*#*#4636#*#* --> Phone Info), there's a field in there which says "Data Attempts: 0". I even tried accessing the menu on that screen, and there was "Enable data connection", I thought that would do the trick, but nada!
Is there some way I can debug this to see why the phone is not using the Data APN?
Ah, by the way, I have also tried with CM-10, same problem. When I revert back to stock firmware, works perfectly.
Click to expand...
Click to collapse
As far as i know you are the only 1 i saw who have this problem, others are low connection only. You sure you set your apn correctly? Note your apn setting in stock then flash cm check the apn setting if it is the same on the stock. Or just try to reflash the rom and make sure you follow the installation guide in op.
Try also to consult others maybe they can help.
---------- Post added at 01:24 AM ---------- Previous post was at 12:31 AM ----------
ANDROID-000 said:
As far as i know you are the only 1 i saw who have this problem, others are low connection only. You sure you set your apn correctly? Note your apn setting in stock then flash cm check the apn setting if it is the same on the stock. Or just try to reflash the rom and make sure you follow the installation guide in op.
Try also to consult others maybe they can help.
Click to expand...
Click to collapse
Edit: i remember the first time I use mobile internet my network send me some requirements like install handset setting, etc. w/c can be access in sim toolkit in stock rom. Our cm rom don't have sim toolkit if i remember (sorry my phone was brick cant see it) try that hope it help.
ANDROID-000 said:
As far as i know you are the only 1 i saw who have this problem, others are low connection only. You sure you set your apn correctly? Note your apn setting in stock then flash cm check the apn setting if it is the same on the stock. Or just try to reflash the rom and make sure you follow the installation guide in op.
Try also to consult others maybe they can help.
---------- Post added at 01:24 AM ---------- Previous post was at 12:31 AM ----------
Edit: i remember the first time I use mobile internet my network send me some requirements like install handset setting, etc. w/c can be access in sim toolkit in stock rom. Our cm rom don't have sim toolkit if i remember (sorry my phone was brick cant see it) try that hope it help.
Click to expand...
Click to collapse
Well, like I said, after I saw that Packet Data was not working on CM-10.1, I flashed to stock firmware; I created the same APN with the exact same settings as on 10.1, it worked fine; I thought I'd try CM-10 this time, so I did, and I created the same APN again, doesn't work; now I have reinstalled 10.1, with the hope that we come up with a solution soon.
Is there anyway I can see some connection debugging? Using adb, or otherwise? There must be a reason why the phone is not choosing the packet data APN, right?
Edit: I don't know if this could help, but I'm from a tiny island in the Indian Ocean called Mauritius. My operator is Emtel, and you can see the settings for Android on their website (emtel.mu/android). Based on that page, I am supposed to set up the APN as follows:
- For Name, enter WEB
- For APN, enter web
- For APN Type select Internet
- Leave all other entries blank
- Save
Click to expand...
Click to collapse
On stock firmware, I do have a drop-down to 'Select Internet' for APN type. On CM-10 and CM-10.1 however, I don't have the drop-down; I have only a textfield; could that be a problem?
rcplktb said:
Well, like I said, after I saw that Packet Data was not working on CM-10.1, I flashed to stock firmware; I created the same APN with the exact same settings as on 10.1, it worked fine; I thought I'd try CM-10 this time, so I did, and I created the same APN again, doesn't work; now I have reinstalled 10.1, with the hope that we come up with a solution soon.
Is there anyway I can see some connection debugging? Using adb, or otherwise? There must be a reason why the phone is not choosing the packet data APN, right?
Click to expand...
Click to collapse
Sorry dude, i dont know already of what is the other sulotion. Try asking our mate maybe they know.
ANDROID-000 said:
Sorry dude, i dont know already of what is the other sulotion. Try asking our mate maybe they know.
Click to expand...
Click to collapse
Well, I think I'll just have to wait here for someone else to answer; I don't know where I can ask this question except here.
Fixed it!
rcplktb said:
Well, I think I'll just have to wait here for someone else to answer; I don't know where I can ask this question except here.
Click to expand...
Click to collapse
Ok, so I was able to fix it in a very simple way; I checked out this post (showthread.php?t=2316943), and in there they tell you how to manually modify the /system/etc/apns-conf.xml file; I checked it and went through it, checking how the other APNs were set up; it turns out I just had to change APN Type to "Default" instead of "Internet" as specified on Emtel's website.
It now works!
Thanks for trying to help , ANDROID-000.
Just for clarification; I ended up not needing to modify the /system/etc/apns-conf.xml file manually; I just changed the APN Type from the interface.
rcplktb said:
Ok, so I was able to fix it in a very simple way; I checked out this post (showthread.php?t=2316943), and in there they tell you how to manually modify the /system/etc/apns-conf.xml file; I checked it and went through it, checking how the other APNs were set up; it turns out I just had to change APN Type to "Default" instead of "Internet" as specified on Emtel's website.
It now works!
Thanks for trying to help , ANDROID-000.
Just for clarification; I ended up not needing to modify the /system/etc/apns-conf.xml file manually; I just changed the APN Type from the interface.
Click to expand...
Click to collapse
Gud to hear, you help me too. My friend had the same problem maybe I will try this too.:thumbup:
ANDROID-000 said:
i have also this issue b4, on CM10.1.2 my mobile internet is working very stable at first but drop after several hours. in signal bar it was E sign instead of H like on first flash. check my post on OP page 213 #2130
http://forum.xda-developers.com/showthread.php?t=2201821&page=213
press thanks if i help!
Click to expand...
Click to collapse
Aftet reboot the Network Preferred turn back to "WCDMA preferred".. How to make "WCDMA only" be permanently?
Sent from my GT-S7500 using xda app-developers app
mohdradzi84 said:
Aftet reboot the Network Preferred turn back to "WCDMA preferred".. How to make "WCDMA only" be permanently?
Sent from my GT-S7500 using xda app-developers app
Click to expand...
Click to collapse
thats i don't know, sorry! I just do the step again everytime i reboot my phone. Anyways, if your phone was reeboted just the same too:sly::thumbup:
---------- Post added at 12:21 PM ---------- Previous post was at 12:19 PM ----------
ANDROID-000 said:
thats i don't know, sorry! I just do the step again everytime i reboot my phone. Anyways, if your phone was reeboted just the same too:sly::thumbup:
Click to expand...
Click to collapse
I'm searching for it too but as of now i'm contented w/ this.:beer::beer: