Related
Hope someone has some info.
I have recently tried to recover my phone via Odin flash. I'm flashing the GummyCharged 1.9 FE odin file. I've done this SEVERAL times w/ out any problems.
My problem now is that when the Odin flash is complete it shows "Pass" and when I reboot my phone it boots with an old version of CWM (4.0.0.1). Not only that but when I try to "reboot phone" it boot loops back to CWM and will not load ANY for of an OS. I've tried multiple Odin files with no luck. Same thing over and over.
Anyone have any suggestions? I'm used to having to recover my phone from a bricked state... but never had an issue where I push a file to the phone and it will not boot after. Tried wiping data/cache after Odin as well... Still nothing.
I would try going back to stock using Imnuts' stock ROM and PIT file which can be found here: http://forum.xda-developers.com/showthread.php?t=1111486
That has always fixed any and all issues I've been having with the phone after messing something up.
EDIT: Here is the stock EE4 ROM http://forum.xda-developers.com/showthread.php?t=1172182
hazard209 said:
I would try going back to stock using Imnuts' stock ROM and PIT file which can be found here: http://forum.xda-developers.com/showthread.php?t=1111486
That has always fixed any and all issues I've been having with the phone after messing something up.
EDIT: Here is the stock EE4 ROM http://forum.xda-developers.com/showthread.php?t=1172182
Click to expand...
Click to collapse
Hey man, I cant thank you ENOUGH!!!! After A LOT of trial and error (had to download the ee4 file from another link) I was able to get this beast to boot back up. I REALLY appreciate your quick response and help!
KaneD20 said:
Hey man, I cant thank you ENOUGH!!!! After A LOT of trial and error (had to download the ee4 file from another link) I was able to get this beast to boot back up. I REALLY appreciate your quick response and help!
Click to expand...
Click to collapse
No problem. Glad you got her back up and running. No one likes a $500 paperweight.
Props to hazard he's always helping people... just want to let you know
Your a good dude...
SENT FROM THE DOG POUND
hazard209 said:
No problem. Glad you got her back up and running. No one likes a $500 paperweight.
Click to expand...
Click to collapse
Yeah, no doubt. And I was able to do a restore on the Imnuts PBJ OBT kernel from 7/30... my problem started when I installed the new kernel version (from 8/8) and tried to backup/restore. Working perfectly now though!
Having same issue still getting recovery mode
I did a fix sd cardupdate for the rom clocking.
I had gumicharge rom on it
After 4 hours my battery was at 50% so I decided hey i can just load the rom on it again and no problem clean free.
It did not work. I am using odin.
It did not work so I got the pit file from this and it gave my system life and the ed1 file wont download it stalls out and failes i tried using
CI510_VZW_EE4_ALL_ONE-LTE-CP_REV03_user_CL1014954.tar.md5
or
CI510_VZW_EP1F_ALL_ONE-LTE-CP_REV3_user_CL300919_Rooted_Debloated.tar.md5
both do nothing.
My phone just sits there reboots into Manual mode and looks like my blue recovery console.
Clear cache
Upload from SD Card
and clear memory so forth.
Thats all my options.
I am now stuck with phone i cant use or update. I am at work so now i cant use the megaupload since those are blocked by our firewall.
I was able to remote to pc to get a pit file.
At this point i dont know what to do or just do insurance claim on my phone and get another one. I dont know how to fix it now.
I cant read the sd card on any computer to put stuff on it and odin is writing things to it The pit file on this fix did give me a recovery enviroment but nothing on roms are on the sd card.
roms ive tried dont load for automaticaly its just in that manual mode thing with the icon of the little android dude.
it says
Android system recover (3e)
Enter: OK key, select:Vol Up/Vol Down
Reboot system now
apply update from sdcard
wipe data/factory reset
wipe cache partition
bewlo it syas #manual mode* and little android guy with eclamation point next to him.
I have tried severla tiems 3 different roms
2Much2Ask4 said:
I did a fix sd cardupdate for the rom clocking.
I had gumicharge rom on it
After 4 hours my battery was at 50% so I decided hey i can just load the rom on it again and no problem clean free.
It did not work. I am using odin.
It did not work so I got the pit file from this and it gave my system life and the ed1 file wont download it stalls out and failes i tried using
CI510_VZW_EE4_ALL_ONE-LTE-CP_REV03_user_CL1014954.tar.md5
or
CI510_VZW_EP1F_ALL_ONE-LTE-CP_REV3_user_CL300919_Rooted_Debloated.tar.md5
both do nothing.
My phone just sits there reboots into Manual mode and looks like my blue recovery console.
Clear cache
Upload from SD Card
and clear memory so forth.
Thats all my options.
I am now stuck with phone i cant use or update. I am at work so now i cant use the megaupload since those are blocked by our firewall.
I was able to remote to pc to get a pit file.
At this point i dont know what to do or just do insurance claim on my phone and get another one. I dont know how to fix it now.
I cant read the sd card on any computer to put stuff on it and odin is writing things to it The pit file on this fix did give me a recovery enviroment but nothing on roms are on the sd card.
roms ive tried dont load for automaticaly its just in that manual mode thing with the icon of the little android dude.
it says
Android system recover (3e)
Enter: OK key, select:Vol Up/Vol Down
Reboot system now
apply update from sdcard
wipe data/factory reset
wipe cache partition
bewlo it syas #manual mode* and little android guy with eclamation point next to him.
I have tried severla tiems 3 different roms
Click to expand...
Click to collapse
Not sure if you're going into download mode properly but try this:
open ODIN
add the PIT file in the PIT section
add the EE4 OEM file in the PDA section (do not use the phone section)
leave everything else in ODIN as default except click on "re-partition"
take your battery out of the phone
hold the volume down button & plug in your USB cable (do not let go of the volume down button until you are in download mode)
ODIN should now now show a yellow com port for your phone on top left of ODIN and your phone should display "download mode"
select start
When it's complete ODIN will show in green that it passed. Unplug your phone, put the battery back in & boot
Hope this helps & good luck
vudiff said:
Not sure if you're going into download mode properly but try this:
open ODIN
add the PIT file in the PIT section
add the EE4 OEM file in the PDA section (do not use the phone section)
leave everything else in ODIN as default except click on "re-partition"
take your battery out of the phone
hold the volume down button & plug in your USB cable (do not let go of the volume down button until you are in download mode)
ODIN should now now show a yellow com port for your phone on top left of ODIN and your phone should display "download mode"
select start
When it's complete ODIN will show in green that it passed. Unplug your phone, put the battery back in & boot
Hope this helps & good luck
Click to expand...
Click to collapse
I would do this but before starting the flash in odin put the battery back in and uncheck the auto reboot box, when its done unplug from pc and remove battery, put it back in then boot up phone
blazing through on my VZ Droid Charge 4G
anoninja118 said:
I would do this but before starting the flash in odin put the battery back in and uncheck the auto reboot box, when its done unplug from pc and remove battery, put it back in then boot up phone
blazing through on my VZ Droid Charge 4G
Click to expand...
Click to collapse
don't put the battery in during flash & leave auto reboot checked. Auto reboot will not do anything as there isn't a battery installed... it'll just turn off. Unplug the phone after you flash it & put battery back in & boot
vudiff said:
Not sure if you're going into download mode properly but try this:
open ODIN
add the PIT file in the PIT section
add the EE4 OEM file in the PDA section (do not use the phone section)
leave everything else in ODIN as default except click on "re-partition"
take your battery out of the phone
hold the volume down button & plug in your USB cable (do not let go of the volume down button until you are in download mode)
ODIN should now now show a yellow com port for your phone on top left of ODIN and your phone should display "download mode"
select start
When it's complete ODIN will show in green that it passed. Unplug your phone, put the battery back in & boot
Hope this helps & good luck
Click to expand...
Click to collapse
This is pretty much what fixed it for me. DON'T GIVE UP! Trust me, I literally had to try this several times before it booted up. I know its frustrating, trust me, but if you stick with it you can fix the phone.
Each time you're able to get to recovery mode, if you're phone doesn't boot, do like five data wipes and wipe cache. Then Odin the .pit and the EE4 from the link above in the pda field (both at the same time).
Good luck! Stick with it I know you CAN fix this!
Sent from my SCH-I510 using XDA Premium App
KaneD20 said:
This is pretty much what fixed it for me. DON'T GIVE UP! Trust me, I literally had to try this several times before it booted up. I know its frustrating, trust me, but if you stick with it you can fix the phone.
Each time you're able to get to recovery mode, if you're phone doesn't boot, do like five data wipes and wipe cache. Then Odin the .pit and the EE4 from the link above in the pda field (both at the same time).
Good luck! Stick with it I know you CAN fix this!
Sent from my SCH-I510 using XDA Premium App
Click to expand...
Click to collapse
No need to wipe anything... when you have "re-partition" checked it wipes everything but the sd card
vudiff said:
No need to wipe anything... when you have "re-partition" checked it wipes everything but the sd card
Click to expand...
Click to collapse
I'm sure you're right, these are just the things that I did when I finally got it working.
I got stuck myself last night and odin started to fail every attempt, even with the pit file and following numerous instructions found around the site. I actually thought my phone was bricked for good.
I installed PST lite and selected the PIT and EE4 and selected to repartition. It took longer to do but everything came back up. Then using odin I was able to flash back to the rom I had before.
This was after an hour of trying to fix it as I mentioned and Odin kept failing.
^attempting to reflash via samsung pst lite.
loaded PIT, stock EE4. checked "repartition". when I click download, it starts, but freezes at 9%. RX_TIMEOUT shows on the phone screen.
I'm trying this method b/c Odin is not working. Same thing, just hangs, sez RX_TIMEOUT. (repartition w/ PIT, stock EE4)
sushi_stalker said:
^attempting to reflash via samsung pst lite.
loaded PIT, stock EE4. checked "repartition". when I click download, it starts, but freezes at 9%. RX_TIMEOUT shows on the phone screen.
I'm trying this method b/c Odin is not working. Same thing, just hangs, sez RX_TIMEOUT. (repartition w/ PIT, stock EE4)
Click to expand...
Click to collapse
Have you tried putting the battery back in during the flash?
Sent from my Droid Charge running GummyFroyo 1.9.1
kvswim said:
Have you tried putting the battery back in during the flash?
Sent from my Droid Charge running GummyFroyo 1.9.1
Click to expand...
Click to collapse
Yes. tried both with and without. Just hangs. Can never fully make it through the flash.
Stuck with soft bricked phone.
Waiting for my wife to get home with her PC laptop. Hoping it really is just a platform issue (running ODIN on Mac Boot Camp)
sushi_stalker said:
Yes. tried both with and without. Just hangs. Can never fully make it through the flash.
Stuck with soft bricked phone.
Waiting for my wife to get home with her PC laptop. Hoping it really is just a platform issue (running ODIN on Mac Boot Camp)
Click to expand...
Click to collapse
What version of Odin are you using? I'm pretty sure I'm using Odin v. 1.82 or something close to that. Not too sure that it would make the difference. Just a thought.
Also, I had to Odin QUITE a few times to get it back up. I had even run the Odin w/ JUST the .pit file. Thought I read somewhere to run the .pit an UNCHECK the repartition box (I know it says it'll give you an error but I did not get one).
All in all, not too sure what exactly it was that finally got it working. But I eventually ran the .pit and ee4 (both posted in post #2 of this thread). Then when my phone booted up, it looked like the problem remained. I had to get back to work from lunch so I just put the phone in my pocket. Then out of nowhere I heard the boot animation come on.
Just make sure you read through, pretty much, all of the threads that deal w/ this stuff. There is almost always someone that has come across the same problem that you may have and almost always someone who had figured out how to fix it.
Good luck, this CAN be fixed!
Hi,
I rooted my brandnew GT-P3110 with cf, flashed pacman and cwm recovery. I do not blame anybody alse for my issues but myself. I guess I messed up the restoring of NON-system-apps:
After a day of troublefree use the tablet randomly rebooted and came back with the message "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again.". No booting into recovery possible, no booting into download mode, no regular boot. Just the same message over and over again. Battery is unremovable.
I installed Kies, updated it, it downloaded drivers but under "emergency recovery" my tablet didn't appear. I then followed the "Firmware Upgrade and Initialization" procedure wich downloaded the necessary files but aborted with a korean text shown in the attachment after replugging the tablet. I tried this with 2 different USB-cables on several USB-ports. Kies btw asked me to remove the battery (not possible) after entering device number and serial-number. I turned off by pressing the off button instead and it turned on again.
I uninstalled Kies, rebooted, installed the samsung drivers manually, rebooted. I installed odin 1.85 (and later 1.3) and downloaded my contry's stock firmware (and later a newer version of the same firmware and another country's stock) from sammobile. I tried to flash them first without "repartition" ticked, later with it ticked but without a pit file (i can't find it!). I got four different errors, two are attached, the third was somethign like "cant write (line 1876)" and "cant write (line 1440)".I tried three stock firmwares with two version of odin with two USB cords on everal ports on ONE computer. I remove the tablet every time, exited odin every time, run it as admin, disabled firewall, xp-antispy and antivirus. I'm on Windows 7.
Besides a million other threads I found this one, but I wasn't able to solve my issue with it: http://forum.xda-developers.com/showthread.php?t=1652398
For 48 hours i tried to solve this problem by myself. Now I hope to find out if there's a point in continuing or if I can give up and throw away the piece of samsung.
Cheers,
404
android404 said:
Hi,
I rooted my brandnew GT-P3110
404
Click to expand...
Click to collapse
Try odin 1.61 1.85 sometimes itll jar it loose
vizionforever said:
Try odin 1.61 1.85 sometimes itll jar it loose
Click to expand...
Click to collapse
I am having the same problem with a P5113. Started with stuck at the Samsung logo. Then I tried a flash from Odin that didn't work. That led to the "Firmware error" screen telling me to use Keis. Keis fails to find the tablet. Odin still sees it but doesn't get a good write.
Now all I get is the battery icon when plugged in but that's it.
Things I have tried:
1) Two versions of Odin
2) Different USB ports
3) Different PC
I also let the device sit over the weekend to completely discharge. Still nothing.
Did you (or anyone else) resolve this issue?
vizionforever said:
Try odin 1.61 1.85 sometimes itll jar it loose
Click to expand...
Click to collapse
Thanks but it didn't work.
wd5gnr said:
I am having the same problem with a P5113. Started with stuck at the Samsung logo. Then I tried a flash from Odin that didn't work. That led to the "Firmware error" screen telling me to use Keis. Keis fails to find the tablet. Odin still sees it but doesn't get a good write.
Now all I get is the battery icon when plugged in but that's it.
Things I have tried:
1) Two versions of Odin
2) Different USB ports
3) Different PC
I also let the device sit over the weekend to completely discharge. Still nothing.
Did you (or anyone else) resolve this issue?
Click to expand...
Click to collapse
Mine is still bricked. Good luck.
facing same problem in my samsung tab 2 p3100 after root
wd5gnr said:
I am having the same problem with a P5113. Started with stuck at the Samsung logo. Then I tried a flash from Odin that didn't work. That led to the "Firmware error" screen telling me to use Keis. Keis fails to find the tablet. Odin still sees it but doesn't get a good write.
Now all I get is the battery icon when plugged in but that's it.
Things I have tried:
1) Two versions of Odin
2) Different USB ports
3) Different PC
I also let the device sit over the weekend to completely discharge. Still nothing.
Did you (or anyone else) resolve this issue?
Click to expand...
Click to collapse
Dude had the same issue on my galaxy S2 and resolved it. I downloaded the
The .pit file for my gt-i9100g (http://data.hu/get/4697903/omap4_all_20110627_emmc.pit)
The stock ROM from sammobile. (http://www.sammobile.com/firmwares/2/)
The JB Bootloader
The stock JB kernel.
Opened odin v1.85.
Then i used the vol down+home+lock keys together to try to open the download mode ( but ended up in the "Firmware error " page) and connected phone to the pc. It shows "Added!" in the message box.
Repartition with the .pit and it will reboot.
Disconnect
Get into download mode and install the bootloader and it should reboot when done. Disconnect.
Get into download mode and connect
Installed the kernel through odin and reboot
Download mode again and install the ROM through odin.
If the phone gets stuck in boot loop (samsung logo over and over),
get into recovery mode ( for s2, vol up+home+lock, it needs to be pressed intermittently)
Then do a full format along with wipe cache.
And then the phone finally booted completely. :laugh: . Good Luck.
Note: I'm not sure to boot into recovery and download are the same key combos as it was for the i9100g.
novjean said:
Dude had the same issue on my galaxy S2 and resolved it. I downloaded the
The .pit file for my gt-i9100g (http://data.hu/get/4697903/omap4_all_20110627_emmc.pit)
Click to expand...
Click to collapse
Thanks. Well, I understand the theory. I have had trouble finding a PIT file that I am sure is for my device. I did save a PIT file but I think it is corrupt because using it requires me to let the battery die afterwards to get back to download mode. Same for the bootloader. I have a few things I've tried, but not sure I have one that is exactly for the GT-P5113 (in fact, I never did find a JB for the 5113 just the 5110 and it never would load).
Well no amount of coaxing has put life back into the tab
I may try again out of curiosity, but rather than invest more time I went out and bought a 32G Nexus 7 (2013 version). I would still like to get the Galaxy Tab alive again -- it has corrupted the flash twice before and each time I was able to bring it back to life. Not sure if this is an actual hardware failure or if it is just beyond partitioning.
I have a feeling if I had the right PIT and the right bootloader I could get back in business.
I can do each thing you mentioned, but my device is not getting detected by my PC. When I insert USB it says USB not recognized and it is not detected by Odin, adb and anything else. I am stuck on Boot Logo for my P3100 and when I go into recovery, it says USB not recognized. Fully messed up. Can you help me out here.
novjean said:
Dude had the same issue on my galaxy S2 and resolved it. I downloaded the
The .pit file for my gt-i9100g (http://data.hu/get/4697903/omap4_all_20110627_emmc.pit)
The stock ROM from sammobile. (http://www.sammobile.com/firmwares/2/)
The JB Bootloader
The stock JB kernel.
Opened odin v1.85.
Then i used the vol down+home+lock keys together to try to open the download mode ( but ended up in the "Firmware error " page) and connected phone to the pc. It shows "Added!" in the message box.
Repartition with the .pit and it will reboot.
Disconnect
Get into download mode and install the bootloader and it should reboot when done. Disconnect.
Get into download mode and connect
Installed the kernel through odin and reboot
Download mode again and install the ROM through odin.
If the phone gets stuck in boot loop (samsung logo over and over),
get into recovery mode ( for s2, vol up+home+lock, it needs to be pressed intermittently)
Then do a full format along with wipe cache.
And then the phone finally booted completely. :laugh: . Good Luck.
Note: I'm not sure to boot into recovery and download are the same key combos as it was for the i9100g.
Click to expand...
Click to collapse
2 years later .... did you ever unbrick this? I'm dealing with a P5113 now that's stuck at the "Firmware upgrade encountered an issue" screen. <sigh>
wd5gnr said:
Well no amount of coaxing has put life back into the tab
I may try again out of curiosity, but rather than invest more time I went out and bought a 32G Nexus 7 (2013 version). I would still like to get the Galaxy Tab alive again -- it has corrupted the flash twice before and each time I was able to bring it back to life. Not sure if this is an actual hardware failure or if it is just beyond partitioning.
I have a feeling if I had the right PIT and the right bootloader I could get back in business.
Click to expand...
Click to collapse
No. I finally sent it to one of these ebay guys who will JTAG it since I was too lazy to wire up one of my JTAG probes. They worked on it and said it was simply dead and the only alternative would be to replace the flash chips.
Bought a Nexus 7.
I've got the pit files for P311x and P3100 on my website https://sites.google.com/site/jrc2swebsite/downloads/samsung-galaxy-tab-2-70-p31xx
Please can you help I bought this samsung tab 2 7.0 P3110 with it only powering on to the samsung tab 2 7.0 logo screen.
I am unable to get to recovery screen using the power and the vol up button all this does is power it off even if I hold for over one minute.
I can get to the download screen (power and vol down doing so is easy as it works) I have been able to use odin (failed many times) and download firmwares.
Last night I was able to download and gain a pass in Odin for CF-Auto-Root-espressowifi-espressowifixx-gtp3110 this I ran fist then 4.1.1 P3110XXCLK7_P3110OXACLK7_BTU. the problem after that is when odin tells it to reboot it hangs at the logo screen everytime. I have tried without the reboot and reboot manually it staill hangs.
is it a bootloader problem? corrupted partition? I think it needs the whole boot process reinstalled or rewritten if someone knows how
I am not looking for a custom rom All i want it to do is to power on into the stock recovery and to power on into the sofware by using something that works either by reformat or re partition the tab to get that part of the tab working before looking at firmware. sometime I have seen write fail when in odin.
simple instructions for how to get it back is all I am looking for.
I have browsed your site and watched youtube for hours no light at the end of the tunnel
thanks in advance for your help
tab 2 7.0 P3110 stuck at Samsung Tab 2 7.0 screen unable to boot to recovery
tab2noob said:
Please can you help I bought this samsung tab 2 7.0 P3110 with it only powering on to the samsung tab 2 7.0 logo screen.
I am unable to get to recovery screen using the power and the vol up button all this does is power it off even if I hold for over one minute.
I can get to the download screen (power and vol down doing so is easy as it works) I have been able to use odin (failed many times) and download firmwares.
Last night I was able to download and gain a pass in Odin for CF-Auto-Root-espressowifi-espressowifixx-gtp3110 this I ran fist then 4.1.1 P3110XXCLK7_P3110OXACLK7_BTU. the problem after that is when odin tells it to reboot it hangs at the logo screen everytime. I have tried without the reboot and reboot manually it staill hangs.
is it a bootloader problem? corrupted partition? I think it needs the whole boot process reinstalled or rewritten if someone knows how
I am not looking for a custom rom All i want it to do is to power on into the stock recovery and to power on into the sofware by using something that works either by reformat or re partition the tab to get that part of the tab working before looking at firmware. sometime I have seen write fail when in odin.
simple instructions for how to get it back is all I am looking for.
I have browsed your site and watched youtube for hours no light at the end of the tunnel
thanks in advance for your help
Click to expand...
Click to collapse
forgot to add the above was using Odin 3.07 and laptop is win 7. did try pc on xp and failed loads.
tab2noob said:
forgot to add the above was using Odin 3.07 and laptop is win 7. did try pc on xp and failed loads.
Click to expand...
Click to collapse
I am not too sure about the partition/repartition thing, but I think you should use said Odin to flash CWM 6.0.45. It doesn't mean you have to install a ROM, but try attempting a factory reset (at this point, not being able to boot up, you might need to use Cwm to create some sort of backup).
However, I suggest waiting until you receive more than one reply, as I may be wrong
For going into recovery, try holding the buttons at the same time. When you see the first samsung bootscreen, release the power button and continue to hold the other button.
jccarbon said:
I am not too sure about the partition/repartition thing, but I think you should use said Odin to flash CWM 6.0.45. It doesn't mean you have to install a ROM, but try attempting a factory reset (at this point, not being able to boot up, you might need to use Cwm to create some sort of backup).
However, I suggest waiting until you receive more than one reply, as I may be wrong
Click to expand...
Click to collapse
Hi thanks for your suggestion. I am thinking until I can get to the recovery screen putting on firmware isnt getting tab into recovery
tab 2 7.0 P3110 unable to boot into recovery or past samsung tab 2 7.0 screen
swrght13 said:
For going into recovery, try holding the buttons at the same time. When you see the first samsung bootscreen, release the power button and continue to hold the other button.
Click to expand...
Click to collapse
Thanks for your reply I probably didnt explain myself. I have always been holding down the power and the vol up button at the same time.
I have access to another tab 2 7.0 P3110 that is working in stock mode (a trusted friend allowed me to check how to get to the download and recovery screens ) I have noted the time it takes to boot into recovery from power off and from the samsung tab 2 7.0 screen and also going into recovery from the download screen. mine dont do any it just goes to the download screen or power off. the screen is black no life lol.
just a thought I dont think it actually powers off although the screen is black because I left it for over 10 hours I felt the back and it was warm battery was low as I couldnt power it on it was fully charged when I tried to get into recovery 10 hours earlier.
will try to explain one step at a time
because of the problem I am thinking I have to start from scratch instead of jumping into the middle of what is already possibly corrupt files. (I have probably built a house out of my bricked Tab)
1. what do I have to do to get a totally clean 8gb space for recovery and firmware to go onto?
2. what has to be installed via Odin to get to recovery (can recovery be tested on its own before the firmware is installed)
3. I have tried a PIT file before all I had was 0 completed and 0 failed???? is that good or bad? didnt see a PASS at the top left. did I have the correct PIT file?
4. are PIT files dependant on which version of Odin I run or recovery or firmware? if they are can someone point my in the right direction for everything that is compatible with each other
I read on this forum of splitting the MD5 files into bootloader pit by extracting it twice I tried that in winRAR I only had one chance it left a tar.md5 file which is the file I used to upload in Odin.
Thanks again for everyones help
2. You need to install Clockwork Mod Recovery version 6.0.4.5. It can be found in the development forum, made by Android-Andi
As for the rest, I'm not familiar
jccarbon said:
2. You need to install Clockwork Mod Recovery version 6.0.4.5. It can be found in the development forum, made by Android-Andi
As for the rest, I'm not familiar
Click to expand...
Click to collapse
I have tried the above it passes and reboots to samsung tab 2 7.0 and thats as far as it goes. I waited 15 minutes no change tried the usual to get into recovery not happening. went back to download screen and ran gtab2P311x8g.pit below is a snippet of the important bits from Odin output screen bottom left I had auto reboot, repartition and f reset time all selected
set pit file
get pit for mapping
theres no pit for mapping
all threads completed succeed 0 failed 1
I have also ran philz touch 6.008 universal root also pass with reboot and without reboot
all tar md5 files installs and with a pass reboots but no blue bar on the bottom of download screen and no access to recovery screen.
I think the internal 8gb memory needs to be wiped and partitioned.
maybe someone can tell me how to extract all the files that are needed to get the os onto the tab from the tar md5 file like the partition, recovery and bootloader etc and the order of installing in Odin
tab2noob said:
I have tried the above it passes and reboots to samsung tab 2 7.0 and thats as far as it goes. I waited 15 minutes no change tried the usual to get into recovery not happening. went back to download screen and ran gtab2P311x8g.pit below is a snippet of the important bits from Odin output screen bottom left I had auto reboot, repartition and f reset time all selected
set pit file
get pit for mapping
theres no pit for mapping
all threads completed succeed 0 failed 1
I have also ran philz touch 6.008 universal root also pass with reboot and without reboot
all tar md5 files installs and with a pass reboots but no blue bar on the bottom of download screen and no access to recovery screen.
I think the internal 8gb memory needs to be wiped and partitioned.
maybe someone can tell me how to extract all the files that are needed to get the os onto the tab from the tar md5 file like the partition, recovery and bootloader etc and the order of installing in Odin
Click to expand...
Click to collapse
Help needed anybody somebody.
I have tried with Heimdall and ADB not working. Now back to Odin
tab2noob said:
Help needed anybody somebody.
I have tried with Heimdall and ADB not working. Now back to Odin
Click to expand...
Click to collapse
Am now running with Odin 3.07 and CF Auto Root espressowifi....md5
it all run through with pass at the end. It doesnt show the blue line running across the bottom of the download screen on the tab. I have never seen this in all the 20 + times I have tried with Odin. All the you tube vids show this as part of the installation process. If I have auto reboot on the tab reboots when Odin send the request to the tab to reset.
tab2noob said:
Am now running with Odin 3.07 and CF Auto Root espressowifi....md5
it all run through with pass at the end. It doesnt show the blue line running across the bottom of the download screen on the tab. I have never seen this in all the 20 + times I have tried with Odin. All the you tube vids show this as part of the installation process. If I have auto reboot on the tab reboots when Odin send the request to the tab to reset.
Click to expand...
Click to collapse
ADB devices does not attach itself to the tab. ADB just says its waiting for device when in download mode and fastboot returns nothing. I think its because I am unable to run USB debugging due to no firmware.
Is there a way to get into the tab if theres no os?
I have taken the back off thinking the volume or power key might be faulty, there not. Pressing the power button and the up vol does nothing apart from putting the tab in a reboot loop or power off. I can get into download mode no prob. I have tried pressing the up and down vol keys with the power button to try to put the tab into shock no change.
I was searching the forum for a similar problem as mine.
And you have the exact same problem as I do.
At some point when I used Odin 3.07 and flashing an official firmware from samsung I got past the first boot screen.
But right after that it shows an android robot with a dedacahedron in front of it showing an animation and a loading bar.
Soon I discovered the next loop, since this animation would loop over and over again.
Now I waited for the battery to run out and charge it up till its full.
By the way:
When the tablet is off and I plug it in with the original cable and charger the tablet shows the battery icon, but it doesnt show the charging animation. The battery icon shows a "waiting" circle. So I cant really see if its charging or not.
Have you had any progress?
Would be so awesome to fix this, this galaxy tab is not mine. Its my brothers and I broke it by trying to root it and install cwm xD
Eureka
Dude I totally got into recovery mode.
I downloaded CWM (clockwordmod) 6.0.1.1 SuperSU 0.96 Busybox 1.2.0.2 md5 file.
You can find it here:
http://forum.xda-developers.com/showthread.php?t=1880010
In the first post there are attached files.
The right one is in that list.
Then I tried flashing it with Odin3 Version 3.09
I googled for a newer version of Odin and found this version 3.09
First time rebooting didnt work.
But the seccond time I succesfully got into CWM recovery.
Hope this works for you 2!
Cheers.
Amlan90 said:
Dude I totally got into recovery mode.
I downloaded CWM (clockwordmod) 6.0.1.1 SuperSU 0.96 Busybox 1.2.0.2 md5 file.
You can find it here:
http://forum.xda-developers.com/showthread.php?t=1880010
In the first post there are attached files.
The right one is in that list.
Then I tried flashing it with Odin3 Version 3.09
I googled for a newer version of Odin and found this version 3.09
First time rebooting didnt work.
But the seccond time I succesfully got into CWM recovery.
Hope this works for you 2!
Cheers.
Click to expand...
Click to collapse
Thanks for the detailed guide and everyone's responses.. I was SOL also and re-flashing CWM helped get me back to where I can flash again.
my samsung galaxy s6 is using android marshmalow,it started last night when out of nowhere it started to reboot itself,i tried restarting the phone but after a few seconds of being on it rebooted it self into the samsung galaxy s6 powerd by android state and keeps showing the white led light and just stays there,i tried wiping particion,factory reset,entering safe mode,but it keeps going back to that exact same state,i also tried charging the phone for several hours but keeps coming back to that state
Note:i can turn the mobile off,and when i do that the phone doesnt reboot,i only reboots when i try to leave it on
-so i now managed somehow to boot it into safe mode and it doesnt reboot,but once i exit safe mode it start the hole thing over again.Note:sometimes when i boot it to safe mode it reboots some times it doesn´t
shaquil999 said:
my samsung galaxy s6 is using android marshmalow,it started last night when out of nowhere it started to reboot itself,i tried restarting the phone but after a few seconds of being on it rebooted it self into the samsung galaxy s6 powerd by android state and keeps showing the white led light and just stays there,i tried wiping particion,factory reset,entering safe mode,but it keeps going back to that exact same state,i also tried charging the phone for several hours but keeps coming back to that state
Note:i can turn the mobile off,and when i do that the phone doesnt reboot,i only reboots when i try to leave it on
-so i now managed somehow to boot it into safe mode and it doesnt reboot,but once i exit safe mode it start the hole thing over again.Note:sometimes when i boot it to safe mode it reboots some times it doesn´t
Click to expand...
Click to collapse
Enter in download mode and flash latest firmware with odin with 4-file flashing method.
115dan said:
Enter in download mode and flash latest firmware with odin with 4-file flashing method.
Click to expand...
Click to collapse
some questions,im kind of a "noob":
1-will doing this void my warranty?
2-can you point out a link where i can get details on how to perform the 4 file flashing method and also where do i download the firmware?
johnny_GSR said:
This will not void warranty, in this link you will find pit files http://forum.xda-developers.com/galaxy-s6/general/g920f-pit-file-banded-firmwares-t3118459
Download any latest firmware even if is 1 file and flash with pit file and repartition ticked
Click to expand...
Click to collapse
wow,ahm as i said im kind o a noob,so i did what you said and downloaded the latest firmware from sammobiles.i am just not getting the part where you say flash with pit file,so in odin i tick repartition,and where there is the button to select pit file i select this firmware that i download it and flash is that it?
Because the link you gave i kinda didnt understand a thing there
johnny_GSR said:
This will not void warranty, in this link you will find pit files http://forum.xda-developers.com/galaxy-s6/general/g920f-pit-file-banded-firmwares-t3118459
Download any latest firmware even if is 1 file and flash with pit file and repartition ticked
Click to expand...
Click to collapse
Wtffff. No repartition or pit file needed with repartition you can brick the phone. Go to sammobile and download from there latest unbranded firmware for SM-G920F and search on internet for a odin tutorial. It will not void your warranty.
115dan said:
Wtffff. No repartition or pit file needed with repartition you can brick the phone. Go to sammobile and download from there latest unbranded firmware for SM-G920F and search on internet for a odin tutorial. It will not void your warranty.
Click to expand...
Click to collapse
hi thank you for helping me avoid making a mistake,now again have patience with me please,i have been looking all over the net and so far i haven't found an article talking about the 4 file flashing method,i have downloaded the latest unbranded firmware all that's left to do is to find out how to do the 4 file flashing method help plz
So one day I decided to flash custom ROM onto my Samsung galaxy Tab 3 Lite (SM-T110) and I used Odin and was new to the whole Rom flashing thing, and so It messed up during flashing and I was stupid and unplugged my tablet and now it is stuck in the download mode saying "Firmware upgrade encountered an issue, please use KIES and try again" something along those lines, and I tried looking it up and tried to fix it, like holding down power button and hard rebooting, didn't work, which now, every time I plug it into my pc to try a flash factory ROM and it keeps turning on and off on the error screen. So can someone help? I cant take it apart because I am using a screwdriver and it is damaging it, to try and take out battery and put it back in, and I'm not buying one of those plastic tools, I want to but, its just for another reason why I can't, So can anyone help? Thanks!
EFS
iplayminecraftps4 said:
So one day I decided to flash custom ROM onto my Samsung galaxy Tab 3 Lite (SM-T110) and I used Odin and was new to the whole Rom flashing thing, and so It messed up during flashing and I was stupid and unplugged my tablet and now it is stuck in the download mode saying "Firmware upgrade encountered an issue, please use KIES and try again" something along those lines, and I tried looking it up and tried to fix it, like holding down power button and hard rebooting, didn't work, which now, every time I plug it into my pc to try a flash factory ROM and it keeps turning on and off on the error screen. So can someone help? I cant take it apart because I am using a screwdriver and it is damaging it, to try and take out battery and put it back in, and I'm not buying one of those plastic tools, I want to but, its just for another reason why I can't, So can anyone help? Thanks!
Click to expand...
Click to collapse
hi and don`t worry
1-flash EFS file with odin (in AP).
2-than you can wipe in recovery mode.GOOD LUCK
NOTE:efs file which is compitble with your device
i.daniyal said:
hi and don`t worry
1-flash EFS file with odin (in AP).
2-than you can wipe in recovery mode.GOOD LUCK
NOTE:efs file which is compitble with your device
Click to expand...
Click to collapse
where can I find an bfs? and what does it stand for?
EDIT: I think I found one, but ill have to wait till I get home from school to do it
So I downloaded it and it was in .tar format. do I need to convert it? because in ap it doenst show up, it shows file formats and .tar is not one of them.
EDIT: never mind used WinZip, and added it, but like I said, every time I plug my tablet into my pc, it turns on, shows the download mode error screen and turn off, then turns right back on, with same screen, and so on and so on. so I really cant do anything till that is fixed...any suggestions? Thanks!
ok try this method:
http://www.99mediasector.com/fix-er...d-issue-please-select-recovery-mode-kies-try/
i.daniyal said:
ok try this method:
http://www.99mediasector.com/fix-er...d-issue-please-select-recovery-mode-kies-try/
Click to expand...
Click to collapse
Ok just fixed the turning on and off thing, I had best idea, hold power button and plug in cord, then let go of power button and it should stay on now
EDIT: just plugged into my pc and its doing it again, it worked with charging cable, but I guess since I unplugged it, it stopped working, ill see when I get home from school and try again
Also turns out the screen only flashes on and off, when it is connected to my pc, when it is to the wall, its fine, so I need to figure that out
Ok it works with my tablet plugged into the "charging only" port basicly, but it does both charge and can send data. But every time I try to flash i on Odin, It always fails, so idk what to do
iplayminecraftps4 said:
Ok it works with my tablet plugged into the "charging only" port basicly, but it does both charge and can send data. But every time I try to flash i on Odin, It always fails, so idk what to do
Click to expand...
Click to collapse
1-enable USB debuging
2-what is the error?
I cant enable it. Still in download mode error screen, and I try to flash it using Odin and it doesn't say pass it says failed, but I'll try to reinstall Odin and maybe download a fresh copy of the stock ROM
iplayminecraftps4 said:
I cant enable it. Still in download mode error screen, and I try to flash it using Odin and it doesn't say pass it says failed, but I'll try to reinstall Odin and maybe download a fresh copy of the stock ROM
Click to expand...
Click to collapse
ok I fixed it, using this link https://www.full-repair-firmware.com/2017/11/full-firmware-t110.html
ok good
But it made it a different language upon setup but I can change to English, but it installs like 4 applications every time I reset it and boot it up, I can uninstall them, but its annoying, and the app called calendar or is supposed to be, is called s planer, I don't like it so I'm trying to find a stock ROM for it so it is back to normal.