Database Info

Micro USB[M] to USB[F]?

I just placed my order on a transformer! I'm just wondering does it have micro usb host? Would i be able to use micro usb to usb adapter to host a usb stick? Thanks!

thebigham said:
I just placed my order on a transformer! I'm just wondering does it have micro usb host? Would i be able to use micro usb to usb adapter to host a usb stick? Thanks!
Click to expand...
Click to collapse
It has a proprietary 40 pin connector. To use USB devices you'll need the keyboard dock or the usb adapter(but the adapter isn't released yet).

[Q] usb otg cable question

hi, i am planning on buying a micro usb to usb female cord and i wanted to plug the micro usb into the xoom, and a mouse into the usb female. would that mouse work with the xoom, or will the drivers for the mouse not work? thank you

I'm not sure, I don't use a mouse on my Xoom. But I have heard from other Xoom users that the Bluetooth Mouse works.

steineronie said:
hi, i am planning on buying a micro usb to usb female cord and i wanted to plug the micro usb into the xoom, and a mouse into the usb female. would that mouse work with the xoom, or will the drivers for the mouse not work? thank you
Click to expand...
Click to collapse
If you want to use a USB connected mouse you need the Xoom to be in USB host mode. You need to have flashed a rom or kernel that supports USB host mode and you need a USB OTG cable, such as the Motorola Camera Connection cable. You can't just use a regular USB cable with a micro end and a female end.

but you can build your own OTG cable.
buy a micro usb B head
and a usb A recept
and solder it together
the schematic is quite the same like the factory cable
instead of soldering pin 1 to 5 (+) like the factory cable u have to solder pin 4 and 5 together (ground)
you can find a lot of DIY tut´s just google it

steineronie said:
hi, i am planning on buying a micro usb to usb female cord and i wanted to plug the micro usb into the xoom, and a mouse into the usb female. would that mouse work with the xoom, or will the drivers for the mouse not work? thank you
Click to expand...
Click to collapse
I can provide OTG HDMI converter Factory cable. If you need, you can PM me.

Just bought this cable from Amazon
It works just fine with wireless Microsoft Keyboard+Mouse but was not able to make it work with my Lumix Camera and Card Reader. Seems there are problems with Android version 4.0.4
My Xoom is MZ604 WIFI only NOT Rooted. Keyboard and Mouse works fine even without rooting it.

jafargio said:
Just bought this cable from Amazon
It works just fine with wireless Microsoft Keyboard+Mouse but was not able to make it work with my Lumix Camera and Card Reader. Seems there are problems with Android version 4.0.4
My Xoom is MZ604 WIFI only NOT Rooted. Keyboard and Mouse works fine even without rooting it.
Click to expand...
Click to collapse
I think it's the XOOM do not support your camera module(no this module driver).Maybe you can upgrade OS to FIX.This issue is ONLY driver issue.

[Q] OTG cable on Cyanogenmod 10.1.2 not working

so i finally found out about the usb host cable or aka OTG cable. I have a verizon S3 model SCH-i535. With experimenting, I have gotten my Canon 7D to work with certain apps. but flash drives of any sort, my WD 2tb usb3 external hard drive, razer keyboard, or logitech wireless headset, or wireless mouse doesnt seem to work with it. my razer mamba mouse did work. but it may be because its wired. has anyone else had experience with this ROM and phone combination?

Possible to hook multiple devices up via micro usb port?

Hello all. Planning to get a MHL 2.0 cable for my note 3 but I also want to hook up a keyboard and mouse. I have a logitech k/b that uses wireless signal via a USB dongle. I figured the OTG cable would suffice but naturally once the MHL cable is in, there is no way to also use the OTG cable. Curious if there is some sort of hub that allows at least 1x micro usb and 1x full size usb, or some sort of splitter? I realize a bluetooth keyboard and mouse is probably another solution but would prefer to avoid if I could.
Thanks!

[Solved] [first adapter does no OTG] OTG in 5.1.5 is not working. Am I the only one?

Yes, I checked settings->extra->OTG-Storage
and there is also a notification tile, which does the same.
BUT: OTG is not working tried this with several adapters, but not the original!

Works fine with me.
Been using it to transfer data over from the 5T.

I used f.e. an adapter usb c to micro usb and than an usb stick with micro usb (not working)
I used also an adapter usb c to micro usb, a micro usb org cable to usb 3.0 and than a usb 3.0 stick (same result)

On my old op3 it helped if you first put the USB drive in the adapter before you insert the adapter in the phone, if adapter (even the original one) was put in first it would not recognize a USB drive.. Hope it helps

Your idea didn't helped.
Normally the LEDs should blink, but nothing happens...
Just to be shure: is original otg adapter is not the only way, it should work with every otg-cable...(?)

Did you check OTG in settings/advanced? It's working great for me and I have an 1€ OTG adapter from China.

Works here great. It works if its enabled before or after inserting. I'm using it with the USB C Yubikey. Only annoyance is you have to turn it on every 15 minutes but I believe there is a Magisk module that can fix this.

I think, I solved it:
The first adapter: usb c to micro USB has no OTG support: It was the last sentence in the fine print:
" USB On-The-Go wird nicht unterstützt"

Hi guys, I got a usb 3.0 I used to use on my Samsung, now I got an adaptor for my op6, I have an issue, everything works great, but the videos are laggy, what could this be any ideas, adaptor fault, or the usb is too slow?