Related
so... i was on cm7 with twrp and i wanted to install the new aokp team acid released with fixes. I thought i read the op correctly and could use twrp to install aokp. i was getting an error but i already wiped system and did a factory reset. anywho i had no os and all my backups on my sd card got deleted a few days prior than today. so i busted out heimdall and everything was going great but the usb cord i was using was some poop and it ""disconnected" during installation. so i rebooted the phone and it gave me the connect to kies message with the 2 computers and i tried i again leaving the phone in one spot. again it came "disconnected" (what a bs usb cord it is). so i went to try a third time and now heimdall cant see my device. but i know its not the cord as poopy as it is it will detect my wifes phone which is a sgs4g too. is there anyway to get heimdall to see what my phone is again?
goddi2010 said:
so... i was on cm7 with twrp and i wanted to install the new aokp team acid released with fixes. I thought i read the op correctly and could use twrp to install aokp. i was getting an error but i already wiped system and did a factory reset. anywho i had no os and all my backups on my sd card got deleted a few days prior than today. so i busted out heimdall and everything was going great but the usb cord i was using was some poop and it ""disconnected" during installation. so i rebooted the phone and it gave me the connect to kies message with the 2 computers and i tried i again leaving the phone in one spot. again it came "disconnected" (what a bs usb cord it is). so i went to try a third time and now heimdall cant see my device. but i know its not the cord as poopy as it is it will detect my wifes phone which is a sgs4g too. is there anyway to get heimdall to see what my phone is again?
Click to expand...
Click to collapse
Calm down you will have to buy or use another USB a Samsung USB is preferred and try a different program I always had trouble using hemidall look up stock one click its a Java app
Sent from my SGH-T959V using XDA
Either that or you may have a broken charging port also. That could be a broken charging port on your phone. Not always is a usb cable fault. But like Imx said, just calm down and youll see the light at the end. After all, youre using an unbrickable Galaxy 4g. Which worst case scenario is the most simple to apply unbrickable mod.
enelyam said:
Either that or you may have a broken charging port also. That could be a broken charging port on your phone. Not always is a usb cable fault. But like Imx said, just calm down and youll see the light at the end. After all, youre using an unbrickable Galaxy 4g. Which worst case scenario is the most simple to apply unbrickable mod.
Click to expand...
Click to collapse
Exactly I brick my phone all the time
Sent from my SGH-T959V using XDA
Technically called "soft bricks"
imxsteezin said:
Calm down you will have to buy or use another USB a Samsung USB is preferred and try a different program I always had trouble using hemidall look up stock one click its a Java app
Sent from my SGH-T959V using XDA
Click to expand...
Click to collapse
Actually a blackberry cable is preferred. The samsung cable is not the best quality. I use it but Im also scared Im going to have issues. I use to have a blackberry cable around here somewhere and there wasnt a phone I couldnt get recognized on my pc with it.
thanks for the advice guys i will try a different cord and reply with my findings. i dont think it is my charging port. that should be fine never had a problem charging it. i never applied the unbrickable mod do you think this would help me?
All i get in the unknown device error when i plug the phone in right now. samsung drivers still dont help it. like i said when i hook my wifes phone which is a galaxy s 4g too to my computer it will recognize hers just not mine.
goddi2010 said:
thanks for the advice guys i will try a different cord and reply with my findings. i dont think it is my charging port. that should be fine never had a problem charging it. i never applied the unbrickable mod do you think this would help me?
All i get in the unknown device error when i plug the phone in right now. samsung drivers still dont help it. like i said when i hook my wifes phone which is a galaxy s 4g too to my computer it will recognize hers just not mine.
Click to expand...
Click to collapse
When you google one click stock for our device and download it the Java app requires you to install Java on your PC one this is done the program will automatically ask if you won't to install the drivers click yes then you will need to go to list at the top left corner select recent devices then Samsung will pop up install them then you click flash and it does all the work
Sent from my SGH-T959V using XDA
Sent from my SGH-T959V using XDA
goddi2010 said:
thanks for the advice guys i will try a different cord and reply with my findings. i dont think it is my charging port. that should be fine never had a problem charging it. i never applied the unbrickable mod do you think this would help me?
All i get in the unknown device error when i plug the phone in right now. samsung drivers still dont help it. like i said when i hook my wifes phone which is a galaxy s 4g too to my computer it will recognize hers just not mine.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1517368
Sent from my SGH-T959V using XDA
Look at your base band and if its kj6 you can use my method
Sent from my SGH-T959V using XDA
Theres a thanks button you can use by the way
Sent from my SGH-T959V using XDA
lol i wil try it and right now i have no base band (it wont boot past the firmware upgrade screen)
i took a look at the link you pasted and thats the method ive been using. the problem is when the one click program loads it says disconnected when i plug the phone in instead of connected
goddi2010 said:
i took a look at the link you pasted and thats the method ive been using. the problem is when the one click program loads it says disconnected when i plug the phone in instead of connected
Click to expand...
Click to collapse
Follow the directions in this thread.
http://forum.xda-developers.com/showpost.php?p=21953878&postcount=2
Be sure to follow them exactly how they are written. lumin has a guide on how to remove your drivers that is probably what is causing your problems is a wonked out driver.
goddi2010 said:
i took a look at the link you pasted and thats the method ive been using. the problem is when the one click program loads it says disconnected when i plug the phone in instead of connected
Click to expand...
Click to collapse
Are you putting it in download mode? Also have you tried to use a different USB cable like I recomended
Sent from my SGH-T959V using XDA
It kind of sounds to me like your drivers are borked. I would recommend uninstalling all drivers, reboot and then install the drivers included with the heimdall one-click.
Sent from my SGH-T959V using XDA
guys, ive been messing around now for about 5 hrs trying to get this thing going and no luck. i know there has to be a way. this is a list of things that ive tried and any other suggestions would be very helpful.
*tried a different usb cord
*used usbdeview to delete anything android/samsung related
*tried another laptopkn
*tried another sgs4g (which one click will say connected but then if i try my phone it wont)
*deleted all known drivers samsung/android related
im going to the store now to see if i can get a brand new usb cord and see if that helps. other than that fellas im clueless as to why i wouldnt be able to get one click to see my device. its almost as if the device doesnt know what it is. but sometimes by chance when i plug it in to my computer it will try to install and if i have one click open it will say connected and the drivers are being detected and then when the drivers fail it becomes disconnected.
Anyone have anything else i can try???
Install Heimdall.
Plug in phone, while it's on download screen.
Launch zadig.exe from the Heimdall\Drivers folder.
Options->List all devices.
Choose the Samsung one... I'm away from my computer so I can't give you the exact name, but I think it's Samsung Composite Device.
Change the driver to libusb0.
Install/replace driver.
Restart computer.
Log into computer.
Restart phone.
Flash successfully.
I remember seeing somewhere that once on mtd the phone responds to the Google drivers. You can install those from the android sdk. Don't know if that would help, but worth a shot if you don't have those drivers installed.
Sent from my SGH-T959V using xda app-developers app
Dear friends
I have got my galaxy fit. Hard bricked as i rooted my phone and then I installed Rom manager . Than while taking Rom back up in sd card it gone blank and I tried it to put in download mode by pressing volume down key home key and power key same time. But nothing happened.
is there any remedy for such hard bricking. How can I resurrect my PHONE.
Sent from my WT19i using xda app-developers app
ajay74 said:
Dear friends
I have got my galaxy fit. Hard bricked as i rooted my phone and then I installed Rom manager . Than while taking Rom back up in sd card it gone blank and I tried it to put in download mode by pressing volume down key home key and power key same time. But nothing happened.
is there any remedy for such hard bricking. How can I resurrect my PHONE.
Sent from my WT19i using xda app-developers app
Click to expand...
Click to collapse
to get past the
Not sure, but on my Galaxy s2 usb jig may can help. Try usb jig..
#someone has posted about usb jig on galaxy fit.. here the thread http://forum.xda-developers.com/showthread.php?t=1349547
Sent from my GT-I9100 using Tapatalk 2
Try this...( I'm not sure but...)
1. Install mobile drivers on pc and open Odin.exe
2. Connect phone to pc. Remove the battery.
3. Now, hold down VOLUME(-) and HOME key and POWER key together to get download mode.
4. While holding these 3 keys, (and your phone stll connected to pc) insert the battery.
Now Odin should detect your phone. If still it doesn't , then take it to the center.
If odin detects phone, flash the official firmware.
Hope it helps.
From personal experience...
I had the same issue with my old GFit. Tried everything! But no luck. Even builded a homemade jig and nothing. On anyway i try to get it to download mode the screen remains off. But i noticed that odin detects it but when i try to flash the stock firmware it says "cannot stablish connection". Also i took it to a store that fix phones and they said that they have a box or something for this kind of cases but no luck... So i got sick of it and bought another one cheap and lightly used...
Wish this is not your case
Sent from my GT-S5670 using xda premium
So friend at last it got fixed. Thanks to jtag box . I got delhi's dealer's address from official jtag site. I contacted him and he repaired boot with jtag.
Sent from my WT19i using xda app-developers app
pl update
ajay74 said:
So friend at last it got fixed. Thanks to jtag box . I got delhi's dealer's address from official jtag site. I contacted him and he repaired boot with jtag.
Sent from my WT19i using xda app-developers app
Click to expand...
Click to collapse
hi Ajay
can u pl. update the procedure by wch u recovered your phone, as it will behelpfull to many others..
a guy Manpreet is facing the similar issue.
It wud be a gr8 help.
pl update it in detail
Many Thanx
Dear friends
The process is bit typical here you need a jtag box and jtag cable. Basically in case of bricking boot file gets corrupted/ damaged. The jtag cable is inserted beneath the battery after removing the sticker beneath battery for boot repairing I advise you to look for suppliers of jtag box from their official site.
And then contact the local jtag box owner. Apart from that there is no other option. I have tried ODIN Multi Downloader it was not getting any response from mobile as mobile was not going into download mode. I tried jig cable too but it was not unsuccessful
After a month I checked jtag box site and got the address of their Delhi dealer and then I got my boot repaired and downgraded to Froyo.
Sent from my WT19i using xda app-developers app
Hi,
I bricked my Samsung Galaxy S 4G (SGH-T959V).
I tried flashing it with a few kernels and roms and suddenly i got my screen always flashing.. (like all LED was up and running )...
Decided to flash again, and my phone went brick.
My phone wont respond to anything , and when i connect it to the computer the computer wont recognize it.
I brought a USB jig to reset it and get to Download Mode. i actually enter Download mode but the computer still dont recognize the device.
I've tried all kind of drivers ( Samsung Kies, and more ) but i got another SGH-T959V which the computer actually recognize, but only my brick device wont get recognize...
what could i do? ( I have no warranty and i bought the device abroad... so returning to samsung isn't a real possibility )
What did you use to flash? Odin?
I had a bad time with Odin
Especially that I got one of those devices that can't enter download mode. But that was in the past, I have a refurbished T959V direct from Samsung
If you haven't tried Heimdall, you should try it and maybe Zadig has the right drivers.
th3controller said:
What did you use to flash? Odin?
I had a bad time with Odin
Especially that I got one of those devices that can't enter download mode. But that was in the past, I have a refurbished T959V direct from Samsung
If you haven't tried Heimdall, you should try it and maybe Zadig has the right drivers.
Click to expand...
Click to collapse
Yeah, i tried heimdall with zadig.. it doesnt recognize my device :\
If you can get to Download Mode, did you try 1-Click Gremlin Remover? It has saved me from a soft brick a few times after I have flashed and reflashed over and over again. Here is the thread, but looks like Thomas.Raines had to pull the file from DropBox due to issues. You might touchbase with him and see if he can give you a link to a copy on a mirror site. It is a great lifesaver. The thread is here: http://forum.xda-developers.com/showthread.php?t=1500427
ariesgodofwar said:
If you can get to Download Mode, did you try 1-Click Gremlin Remover? It has saved me from a soft brick a few times after I have flashed and reflashed over and over again. Here is the thread, but looks like Thomas.Raines had to pull the file from DropBox due to issues. You might touchbase with him and see if he can give you a link to a copy on a mirror site. It is a great lifesaver. The thread is here: http://forum.xda-developers.com/showthread.php?t=1500427
Click to expand...
Click to collapse
The main issue is that my computer wont recognize the device! this particular one, since the other galaxy S 4G i have get recognize fine!
I will try the one click you showed.. but im guessing it wont do the trick.
Don't you love it when you CLEARLY state that your phone WILL NOT BE RECOGNIZED BY THE COMPUTER but yet people instantly start telling you to do things that require you being connected to your computer. Lmao. Did you try different usb cords, different usb ports, or even a different computer? You can download a program called usb diag and use that to COMPLETELY remove the drivers and re-install them and see if that works.
Sent from my SGH-T959V using xda premium
USB jig time lol
Sent from my SGH-T959V using xda app-developers app
TwitchyEye said:
USB jig time lol
Sent from my SGH-T959V using xda app-developers app
Click to expand...
Click to collapse
Joshhayes801 - Thanks for the reply.
I have another Galaxy S 4G which get's recognized great..
I even removed all drivers, re-installed kies, mini kies etc...
The other Galaxy S 4G i have get's recognized very well... only this device is not.
i've tried all ports. (not different cord since i do not have another one ) .. and changed drivers all day long.
I used usb JIG to get to Download mode ( its the only way... ) and still get's "Not recognized" ...
There was a guy who said recently he really had to jam the USB cable into his phone for it to get recognized by zadig. Maybe yours is finicky like that too
Sent from my SGH-T959V using xda app-developers app
flash it in different pc...
Sent from my SGH-T959V using xda premium
My old SGS4G was like this, turns out it had a messed up usb port, it was all loose and ****. At that point the phone was under warranty so I got a new one. Maybe your usb port on the phone is jacked. Just a thought. Seems nothing else is working. You can find a usb port on eBay and repair it or if you have insurance send it in for a new phone or a repair.
Sent from my SGH-T959V using xda premium
hello everybody
can anybody help with my problem
i have i9003 device its bricked i tried to fix it with riff box
the problem when am trying to connect i9003 board to usb the computer detect the omap 3630 for about 2 seconds and disappear
i removed the usb cable and plug it again but nothing happens so i removed the battery and replug it again and the same problem appears detects omap 3630 for 2 seconds and disappear.
any one have the same problem and fix it before ?
please i need help
thanks for all
we repair i9003 with ODIN. Whats the problem of your device?
bro kindly tell what is the status of your phone before the problem occured and also tell what did you do to your device that caused it to behave that way
the problem is my i9003 is off nothing appear on screen after install new firmware
the phone is totally off :S
Which firmware did u installed and what was ur battery condition.
Sent from my GT-I9003 using xda premium
i dont remember the firmware version and the battery condition is fully charged
ppl please am just asking about the condition of the board when its connected to the pc via usb its appears in device manager as omap 3630 for 2 seconds and disappear
anybody passed in this situation before??????????
is mean that board damaged for that its not taking power or what ???
shaian76 said:
i dont remember the firmware version and the battery condition is fully charged
ppl please am just asking about the condition of the board when its connected to the pc via usb its appears in device manager as omap 3630 for 2 seconds and disappear
anybody passed in this situation before??????????
is mean that board damaged for that its not taking power or what ???
Click to expand...
Click to collapse
did you flash using odin??
charge your phone for one hour then take out battery and leave it like that for 5 min. put battery back, press the keys you press for download mode after starting odin and connect your phone. let me know if it shows com#0 or com#6 there
sometimes display goes blank because of glitches in firmware upgrade but they still work. so if it shows on odin then flash it with new software and please don't play around with .pit file. its one of the main reason for bricking your phone.
get updated software from sammobile.com or samsung-updates.com
whatever file you get, unzip it and load it in pda
I'll check it today and give you feedback of results
Sent from my LG-P705 using xda app-developers app
not detecting anything in odin
Hi all,
Please help... I tried to flash my SL I9003 and somehow the connection broke in between.
Now the mobile doesnt power on and when connected to the laptop, I just see the processor getting recognized and then disappears. within 2 seconds.
I tried with USB Jig but nothing happens.
Any ideas?
Please help. I dont want to loose this phone dead.
Does Odin recognize the phone? I mean, with Odin on, press volume down + power, connect it to the laptop and see if the phone goes into download mode so Odin could recognize it (COM status shown)
Hope this helps
Sent from my GT-I9003 using xda app-developers app
this should be in the general .
take out the battery. put back in and get into download mode if possible. if not, to the service center you should bring it..
Sent from my GT-I9003 using xda app-developers app
samsunggti9000 said:
I tried with USB Jig but nothing happens.
Any ideas?
Please help. I dont want to loose this phone dead.
Click to expand...
Click to collapse
your username 9000
you are sure that you are in the right section ?
If not you COME to burn your motherboard
The only solution, samsung service center with your operator
If longer supported you still have to flash the board with a Jtag repair tools Professional equipment
You shook minimum 60 € without success if really toasted your motherboard
Sincerely ...
Thank you all for ur suggestions.
@kralin, the phone doesnt get recognized using the odin. doesnt startup and no lights and no logo. I have installed the processor drivers in my windows 7 laptop and when connecting the phone, it recognizes the processor for 2 seconds and disconnects.
@imjustafq, this was the first step when I thought I bricked my phone but to no use.
@LoLaTiOn, dont worry about the username. I am in the right section.
I tried to check with Samsung center and they said they dont know what to do. not tied with any operator though..
You described the symptoms which very like hard brick like corrupted bootloader
Sent from my Galaxy Nexus using Tapatalk 2
chongns said:
You described the symptoms which very like hard brick like corrupted bootloader
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
Do we have any solutions for Hard Brick? I tried to use USB Jig but of no use.
samsunggti9000 said:
Do we have any solutions for Hard Brick? I tried to use USB Jig but of no use.
Click to expand...
Click to collapse
One and only solution is service center.
Sent from my GT-I9003 using Tapatalk 2