Related
Phone completely not working, and when i connect USB its getting connection as APX drive. download mode, recovery mode not working.
i dont know what i have to do for this .........
also i have tried to repair boot using RIFF bt phone not detecting.
Any help will be greatly appreciated
Did u try reinstalling the samsung usb drivers for our mobile ?
If it still doesn't solve your issue try connecting it to a different PC but install samsung usb drivers first on it before connecting.
Try & keep us updated if it resolves the issue.
Thanks for ur reply
phone is dead. its only need APX driver when attach USB.
I found the driver :
http://www.mediafire.com/?5lwxvgzlgvflfce
but what's next ?
RIFF doesn't detect it also .
@ usernome
Did you solve this problem. i have 2 phone in same position.
i just thinking its able to repair via Nvidia Boot Recovery mode.
but what is the procedure or what we have to do ?
0ps!! nothing found
I had the same problem with my phone the day I bought it.... it refused to start for over an hour for the 1st time no matter what I tried... the laptop detected a new apx when connected via usb.. Finally it started with sim and sd card removed... but after that it's been working rather fine apart from a few hiccups here n there... Still its very strange that this is happening..
Sent from my GT-I9103 using XDA App
delower10 said:
@ usernome
Did you solve this problem. i have 2 phone in same position.
i just thinking its able to repair via Nvidia Boot Recovery mode.
but what is the procedure or what we have to do ?
0ps!! nothing found
Click to expand...
Click to collapse
Hi buddy someone got the same issue without doing anything to the handset, when given to the CC they told it needs a motherboard replacement. I feel it maybe the same in your case & maybe you have no option but to take it to the Samsung service center.
Hope it helps.
'cooleagle' said:
Hi buddy someone got the same issue without doing anything to the handset, when given to the CC they told it needs a motherboard replacement. I feel it maybe the same in your case & maybe you have no option but to take it to the Samsung service center.
Hope it helps.
Click to expand...
Click to collapse
That's me bro
We need someone to make nvflash for the R !
Herpderp Defy.
NVFLASH was detecting the phone. The phone's capacitive buttons would light up when the connection was made. But I didn find SGR's Bootloader file anywhere, else would have tried to flash it. I read somewhere today that not clicking "Re-partition" option while using odin might corrupt the bootloader. But it had been weeks since I had used odin(CWM installation). So in no case the bootloader was damaged by odin. The thing to investigate is how come suddenly the phone goes into this mode, without any change in settings or modification ??
zerocool_rkl said:
NVFLASH was detecting the phone. The phone's capacitive buttons would light up when the connection was made. But I didn find SGR's Bootloader file anywhere, else would have tried to flash it. I read somewhere today that not clicking "Re-partition" option while using odin might corrupt the bootloader. But it had been weeks since I had used odin(CWM installation). So in no case the bootloader was damaged by odin. The thing to investigate is how come suddenly the phone goes into this mode, without any change in settings or modification ??
Click to expand...
Click to collapse
Might be a software/hardware defect
Herpderp Defy.
Any knows how to extract the bootloader ???
USE this method for repair i9103
http://forum.gsmhosting.com/vbb/f47...-need-jtag-no-need-disassembly-phone-1437798/
Sorry
I don't know what is APX mode
mine phone too is stuck in apx mode . i tired the fix galaxy R fone repair APX mode . after that too its stays in apx mode . please anyone help here
Hi, I have a lg 3d optimus flashee it wrong and now not even get the lg logo, the computer detects it as I omap 4430 but I installed the drivers, I followed step by step this thread http://forum .xda-developers.com/showpost.php? p = 17177547 & postcount = 2 but I can not install the driver omap 4430, the only solution is to solder? as I do if I have no soldering tools here needed? someone could take a hand?
anyone?
Dude don't do anything drastic. Is imap flashing on and off when you connect. Many have problems with getting into download mode. You have to do it just right.
Sent from my LG-P920 using xda premium
Bdadd34 said:
Dude don't do anything drastic. Is imap flashing on and off when you connect. Many have problems with getting into download mode. You have to do it just right.
Sent from my LG-P920 using xda premium
Click to expand...
Click to collapse
just watch trekfan's video. he shows a little trick with the battery.
kevin_23 said:
Hi, I have a lg 3d optimus flashee it wrong and now not even get the lg logo, the computer detects it as I omap 4430 but I installed the drivers, I followed step by step this thread http://forum .xda-developers.com/showpost.php? p = 17177547 & postcount = 2 but I can not install the driver omap 4430, the only solution is to solder? as I do if I have no soldering tools here needed? someone could take a hand?
Click to expand...
Click to collapse
the easiest way is to just download the software update LGMobile support tool
http://www.lg.com/uk/support/mc-support/mobile-phone-support.jsp
launch the software. Take out battery, attach usb to pc, then hold volume up and power at same time, the software will see phone, select customer support then recovery or something like this – type IMEI number and then software will just re download and flash the phone to repair. the phone will have power for the flashing via the usb. when it finished just re attach battery and turn phone on.
If omap4430 keeps connecting and disconnecting,neither lg flashtoor nor lg mobile updater will help in this case.
You need to find a 2nd stage bootloader for the phone or see if LG agrees to repair it.
btw I'm in the same boat
Thread will be moved. Based on the fact it's not:
A ROM [X]
Mod [X]
Kernel [X]
Thank you for your compliance, hope you get your phone working.
If someone could modify the omapflash tool for o3d,the problem would be resolved.
thanks for all reponses, and and how could solder the USB cable? what tools I need or where I could do?
if it keeps connecting and the disconneting try this. attach usb cable to PHONE only then take your battery out, then put battery back in and quickly press volume up button and then attach usb cable to PC. keep hold of volume up button all time dont let go and install all drivers omap, usb driver etc.
hope it helps
iqb043 said:
if it keeps connecting and the disconneting try this. attach usb cable to PHONE only then take your battery out, then put battery back in and quickly press volume up button and then attach usb cable to PC. keep hold of volume up button all time dont let go and install all drivers omap, usb driver etc.
hope it helps
Click to expand...
Click to collapse
Yep it always does that to me. Omap is con and disc always for me and i never bricked my phone. Use the metod above and u shoud be grand.
Sent from my LG-P920 using XDA
what did you flash to your phone that caused brick?
Same problem here. I sent it back to LG, as the phone is in warranty, but if there is a solution, I wish to know it, in order to avoid sending again the phone to LG if the problem repeats... hehe...
sergiocues said:
Same problem here. I sent it back to LG, as the phone is in warranty, but if there is a solution, I wish to know it, in order to avoid sending again the phone to LG if the problem repeats... hehe...
Click to expand...
Click to collapse
+1
Sent from my LG-P920
search resurrection guide
Send from my XBSA ICS V7.2 P920.
I tried it, but I cannot do nothing, because omap still connects and disconnect
thats what it does
Send from my XBSA ICS V7.2 P920.
I have the same problem........i bought this phone long time ago and i just found it while cleaning my room........i thought that maybe i should update it since its still running Gingerbread.....i tried almost everything but nothing seems to be working...omapboot is not working, lg flashtool is not working...the phone is not showing any signs of life.....the only time it responds is when i connect it to my pc and it shows up as OMAP4430 TI Board.....
HELP NEEDED, I dont want to loose this phone
hello guys,
i have 2 Problems with my galaxy R.
My mobilephone doesn't load the battery when i plug in the charger. If i shut down the phone and connect the charger, the phone goes on and the empty battery symbol is drawn an the screen and the refresh logo of the battery is shown. But after 1-2 second's the screen is black and the phone turn off, this repeats the whole time.
When i turn on the phone, it starts without problems, when i plug in the charger it does nothing. I tryed to plug in the charger during the night, and the pho73ne loadet from 59% to 73%.
I have the Galaxy R with 3 Branding (Firmware, which was installed, when i get my galaxy R), but i have rooted the phone and have clockworkMod 4.xxx.
Now, i wanted to flash the firmware again (for warranty, to delete root and clockworkmod), but i cannot connect my phone to the pc. When i plug in the usc cable, my notebook don't recognize my phone and the phone does nothing.
My question now is, how can i remove root and clockworkmod, so that i can give the phone to the shop for warranty?
I hope you have ideas for me, and sorry for my bad english, i'm from Austria
now i made a video...
see here:
http://www.youtube.com/watch?v=PaOwBfx-J_g
try connecting ur phone in apx mode and check that is it a hardware issur or software, to connect in apx mode reinstall ur battery and press VOL DOWN + HOME + POWER keys and plug in usb cable while these keys are pressed, ur pc should detect a hardware named APX
rostiges_Handy said:
My question now is, how can i remove root and clockworkmod, so that i can give the phone to the shop for warranty?
Click to expand...
Click to collapse
(1) To unroot flash unroot.zip via CWM
(2) To remove CWM recovery, flash stock_recovery.zip via CWM
xlm13x said:
try connecting ur phone in apx mode and check that is it a hardware issur or software, to connect in apx mode reinstall ur battery and press VOL DOWN + HOME + POWER keys and plug in usb cable while these keys are pressed, ur pc should detect a hardware named APX
Click to expand...
Click to collapse
Hey, thank you for your help.
I tried this, but the phone only shows "Warning. A Custom OS can cause critical problems in phone and installed applications. If you want............. Volume up: Continue, Volume down: Cancel (restart phone)
The PC's doesn't do anything while connected via usb cable with the phone
(1) To unroot flash unroot.zip via CWM
(2) To remove CWM recovery, flash stock_recovery.zip via CWM
Click to expand...
Click to collapse
Thank you too :good: your are a great help for me , but are this files the right ones for the XWLA4 Firmware (2.3.6, 3 Austria) ?
these files will work with all the ROMs
Sent from my GT-I9103 using XDA
Hey buddy! This is what exactly happened with me! This is a physical damage. So there's nothing you can do by flashing other ROMs or stock ROMs or so....
Check out my thread here:-
http://forum.xda-developers.com/showthread.php?t=1663812
I've explained everything about my case and how I was able to revert back to my country's stock ROM, unroot the phone and revert back to stock recovery.
Then I gave my phone for repair to SSC and they told me that it's a physical damage. They changed the whole charging port of my phone. Took 3-4 days though. Depends on availability of that part.
And since my phone was in warranty and SSC guys are dumb, I got it done for FREE!!
---------- Post added at 09:46 AM ---------- Previous post was at 09:37 AM ----------
And please make the video "private" or "unlisted" on YouTube.
We seriously don't want to give any bad impressions to those who are thinking of buying SGR.
pankaj88 said:
(1) To unroot flash unroot.zip via CWM
(2) To remove CWM recovery, flash stock_recovery.zip via CWM
Click to expand...
Click to collapse
Hey bro, shall we add these files to a stickied thread so that all those in trouble can easily access it? I'm sure it'll be really helpful for many ppl.. Great work!
Proud to own a Galaxy R
vbz89 said:
Hey bro, shall we add these files to a stickied thread so that all those in trouble can easily access it? I'm sure it'll be really helpful for many ppl.. Great work!
Proud to own a Galaxy R
Click to expand...
Click to collapse
ASK the Moderator
we will tell cooleagle to add these two file to put it in Guide, so that every one can access this when ever required ...
hi guys,
since yesterday I get my phone back. It was repaired within the warranty.
Thank you again ankaj88 you helped me a lot
Now my phone works as it should
my galaxy r problem
now I wear neo3.0 firmware. so i want to flash rom to gb 2.3.6 update ics reason want but can not. usb not detect directly. ing any charge. want to follow the phone flash wear CWE install aborde
aliutak said:
now I wear neo3.0 firmware. so i want to flash rom to gb 2.3.6 update ics reason want but can not. usb not detect directly. ing any charge. want to follow the phone flash wear CWE install aborde
Click to expand...
Click to collapse
Hi buddy, I appreciate that you haven't started a new thread. Could you tell me which language you know ? I am asking because then I could understand your issue clearly.
If you would have searched a bit you would have surely got the answer in the FAQ's post (in the newbie guide thread), check this out:
Q. My device is not being detected on being connected to my PC but I can charge it via the wall / normal charger ! What to do?
First of all check if you have the latest Samsung Kies software installed as it also installs the latest Samsung USB drivers along with it which are required to connect your device to the PC. If they are installed & still your PC doesn't detect the device then you probably have corrupted drivers. To resolve this follow these steps: Uninstall Samsung Kies / Samsung USB drivers currently installed => Restart your PC => Reinstall Samsung Kies / Samsung USB drivers.
Q. I can't charge my device & my device is not being detected after connecting to my PC & Odin is not detecting my device ! What to do?
(The solution is valid only if you are experiencing all of the above conditions simultaneously)
Checkout this thread which could help you: => [Partial Fix] Galaxy R not getting detected on PC nor charging via a charger.
Hope this helps.
hi have been trying to update to 4.0 via flash tool but ive tried everything and cannot get it to work......ive been trying for 3 days and ive pretty much had enough of trying on my own so i though id would ask for help.
ok firstly i am on gb 2.3 im running custom cm7 no probs but i wana take the next step 4.0 so....i have all lg flash tool etc and fast load etc all nessacary files needed but for some reason my phone wont connet and flash its doing my head in. i have it into download mode, battery out etc but after that nothing i cannot progress further its like the program wont connect/register the phone.
im running win7 i even looked into other post and thought this maybe the problem but i have already installed these when gone into download mode as said here If you plug your Phone on PC without battery, OMAP4430 device appeared for seconds and then disappeared in your Windows Device Manager
(check arsen4oo photo guide in post #3)
On windows 7 sometimes OMAP4430 flashes too fast so you cant install driver.
There is a a windows feature that will help you install the driver easier.
To view devices that were once installed but are no longer attached to the computer, open a Command Prompt window using the Run As Administrator option and enter the command:
SET DEVMGR_SHOW_NONPRESENT_DEVICES=1
Then, from the same command prompt, type devmgmt.msc to open Device Manager. Choose View, Show Hidden Devices. The new instance of Device Manager will show “ghosted” entries for devices that were once present. This technique is especially useful for fixing problems caused by leftover drivers after replacing a network card or video card—you can easily delete the ghosted device or update the OMAP4430 driver.e
i just dont know what im doing wrong
cheers in advance
HI,
Please uninstall all LG drivers, and start again. If you are using WIN7, run it with WINXP SP3 compatibility mode.
Getting the Software upgrade screen is tricky, the timing needs ti be just right for the screen to stay, else it blinks and the OMAPP difficulty starts.
You need to listed to the connect disconnect sounds carefully.
Its not difficult, just that the timing needs to be right for the battery to be inserted.
all the best
schubeir
schubeir said:
HI,
Please uninstall all LG drivers, and start again. If you are using WIN7, run it with WINXP SP3 compatibility mode.
Getting the Software upgrade screen is tricky, the timing needs ti be just right for the screen to stay, else it blinks and the OMAPP difficulty starts.
You need to listed to the connect disconnect sounds carefully.
Its not difficult, just that the timing needs to be right for the battery to be inserted.
all the best
schubeir
Click to expand...
Click to collapse
ok so i unistalled all drivers etc done as said but im still doing something wrong.....
1.i have batt out connect phone wait few seconds for it to connect hear a sound connection keep held down till also hear another connection to say all connected etc.(the drivers have installed etc)
2.the screen is blank still battery is out
3.i have installed omap flash, lg flash tool and lg smart flash tool and fastboot and i can get any to work with phone
4.now there is no software update on screen even if i put battery back in phone just stay blank
so thats were i get to so lost.....
cheers in advance
And in FLASH TOOL TUTORIAL there is illustrations of a cable broken down etc do I have to do this to get into download mode and what acctual flash tool do I need to use because there is a few out but tried most but don't work with mine is it to dowith cable? And I have brought new cables etc just in case cheers in advance
Another stupid question but it shouldn't have anything to do with my phone having being rooted and not runngin LG software......I'm so confused with it all as I have tried everything and if it don't work phone can go to someone else lol cheers again
matt2098 said:
Another stupid question but it shouldn't have anything to do with my phone having being rooted and not runngin LG software......I'm so confused with it all as I have tried everything and if it don't work phone can go to someone else lol cheers again
Click to expand...
Click to collapse
Make sure all the drivers from the guide are installed. (including omap driver)
Load the DLL and the rom to lg flashtool.
Listen to the port with LG flashtool's port settings. (One is enough , The icon with a printer cable that's the port settings)
Take the battery out but be ready to plug it back in.
connect the usb cable.
Hold volume up
You're gonna hear sounds from windows in this order ;
1.Connected
2. Disconnected
3. Connected (Again , when you hear this plug the battery back in)
If you did it right then you're now in download mode.
Go to the device manager , find the LG device (I don't remember the name , but there is only one so you'll see it.) and go to properties , advanced and port settings.
Change the port to com41.
Flashtool should take over and start.
For extra guidance , see xbsall's thread ;
http://forum.xda-developers.com/showthread.php?t=1942836
To enter download mode .
Your phone in your hands without anything :-
1- Pull out battery .
2- hold vol+ and keep holding .
3- Connect your phone and you are still holding....
4- Now the phone is connected and you are holding vol+ . Insert battery and keep holding for about 3 seconds . Now the phone in download mode (there are some korean words on the screen) .
That's all
Good Luck
Sent From My P920 (ICS ported)
Hit Thanks Button If I Helped
ok i bloody given up going to use it as a bloody paper weight doing my head in.....no matter what i do i cannot get up software screen in download mode??? i do exactly as stated and still it doesn't want to do it every time blank screen phone will not power on.
with battery in screen blank went through listerning to conect disconnect connect etc do as descriped and now phone is connectected with blank screen as stated i know its connected installed everything.
cheers for the help
http://www.youtube.com/watch?v=zrkHry0gRZw this is excatly what im doing and nothing......
When you're online pm me when you can be online tomorrow.
Sent from my LG-P920 using xda app-developers app
Read the #3 post in this thread :-
http://forum.xda-developers.com/showthread.php?t=1942836
Maybe it will help .
Sent From My P920 (ICS ported)
Hit Thanks Button If I Helped
and works it
mayby this help
http://lg-usb-modem-driver.soft32.com/free-download?rel=center
good luck
ok so further update i can get it into fastboot which has a small lg symbol and says fastboot at the top but still no Korean writing software upgrade screen and in device manager i have lg cosmo come up now. It doesn't have LGE CDMA USB SERIAL PORT this up any more, ive insalled all new driver the lot everything prgressed a little further but stuck again lol cheers for the help so far
u want to flash ported ics im right?
Sent from my LG-P920 using xda app-developers app
OIKk finnally im on software download screen YAY!!!!!!!!!!! but flash tool keeps saying fail and at the top were is says model its say su660 not p920???? which i now have managed to sort so i press start and its says ready and nothing............hasnt done much phone pwers off then back to the begin again cheers again
Because you're flashing the baseband before you flash the ROM. Change the sequence , ROM first then baseband. (Just remove the baseband you added on the flash tool ".fls file" then add it again it's gonna be flashed after the ROM )
Edit : I can help via team viewer if you want.
Sent from my LG-P920 using xda app-developers app
if u read this u should know that u neednt fastboot to flash this ported ics and have to flash bin file first then fls file
and at the thread of first ported ics from xbsa tell u everthing what u use to know to flash this rom
http://forum.xda-developers.com/showthread.php?p=17177547
2nd post is in english
Sent from my LG-P920 using xda app-developers app
its all son confusing as there is so many different guides tutorals etc the only way i can get in software mode is by fast boot i can progress further to here but now im stuck tottaly lol its gets to 27% and stops because of a omap fail???
and all the time ive only been tryig to insatll the rom bin file as of present....not the fls so im now up to here and dont have clue with team viewer lol
Look at your pm
Sent from my LG-P920 using xda app-developers app
Hi all,
Please help... I tried to flash my SL I9003 and somehow the connection broke in between.
Now the mobile doesnt power on and when connected to the laptop, I just see the processor getting recognized and then disappears. within 2 seconds.
I tried with USB Jig but nothing happens.
Any ideas?
Please help. I dont want to loose this phone dead.
Does Odin recognize the phone? I mean, with Odin on, press volume down + power, connect it to the laptop and see if the phone goes into download mode so Odin could recognize it (COM status shown)
Hope this helps
Sent from my GT-I9003 using xda app-developers app
this should be in the general .
take out the battery. put back in and get into download mode if possible. if not, to the service center you should bring it..
Sent from my GT-I9003 using xda app-developers app
samsunggti9000 said:
I tried with USB Jig but nothing happens.
Any ideas?
Please help. I dont want to loose this phone dead.
Click to expand...
Click to collapse
your username 9000
you are sure that you are in the right section ?
If not you COME to burn your motherboard
The only solution, samsung service center with your operator
If longer supported you still have to flash the board with a Jtag repair tools Professional equipment
You shook minimum 60 € without success if really toasted your motherboard
Sincerely ...
Thank you all for ur suggestions.
@kralin, the phone doesnt get recognized using the odin. doesnt startup and no lights and no logo. I have installed the processor drivers in my windows 7 laptop and when connecting the phone, it recognizes the processor for 2 seconds and disconnects.
@imjustafq, this was the first step when I thought I bricked my phone but to no use.
@LoLaTiOn, dont worry about the username. I am in the right section.
I tried to check with Samsung center and they said they dont know what to do. not tied with any operator though..
You described the symptoms which very like hard brick like corrupted bootloader
Sent from my Galaxy Nexus using Tapatalk 2
chongns said:
You described the symptoms which very like hard brick like corrupted bootloader
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
Do we have any solutions for Hard Brick? I tried to use USB Jig but of no use.
samsunggti9000 said:
Do we have any solutions for Hard Brick? I tried to use USB Jig but of no use.
Click to expand...
Click to collapse
One and only solution is service center.
Sent from my GT-I9003 using Tapatalk 2