Dear friends
I have got my galaxy fit. Hard bricked as i rooted my phone and then I installed Rom manager . Than while taking Rom back up in sd card it gone blank and I tried it to put in download mode by pressing volume down key home key and power key same time. But nothing happened.
is there any remedy for such hard bricking. How can I resurrect my PHONE.
Sent from my WT19i using xda app-developers app
ajay74 said:
Dear friends
I have got my galaxy fit. Hard bricked as i rooted my phone and then I installed Rom manager . Than while taking Rom back up in sd card it gone blank and I tried it to put in download mode by pressing volume down key home key and power key same time. But nothing happened.
is there any remedy for such hard bricking. How can I resurrect my PHONE.
Sent from my WT19i using xda app-developers app
Click to expand...
Click to collapse
to get past the
Not sure, but on my Galaxy s2 usb jig may can help. Try usb jig..
#someone has posted about usb jig on galaxy fit.. here the thread http://forum.xda-developers.com/showthread.php?t=1349547
Sent from my GT-I9100 using Tapatalk 2
Try this...( I'm not sure but...)
1. Install mobile drivers on pc and open Odin.exe
2. Connect phone to pc. Remove the battery.
3. Now, hold down VOLUME(-) and HOME key and POWER key together to get download mode.
4. While holding these 3 keys, (and your phone stll connected to pc) insert the battery.
Now Odin should detect your phone. If still it doesn't , then take it to the center.
If odin detects phone, flash the official firmware.
Hope it helps.
From personal experience...
I had the same issue with my old GFit. Tried everything! But no luck. Even builded a homemade jig and nothing. On anyway i try to get it to download mode the screen remains off. But i noticed that odin detects it but when i try to flash the stock firmware it says "cannot stablish connection". Also i took it to a store that fix phones and they said that they have a box or something for this kind of cases but no luck... So i got sick of it and bought another one cheap and lightly used...
Wish this is not your case
Sent from my GT-S5670 using xda premium
So friend at last it got fixed. Thanks to jtag box . I got delhi's dealer's address from official jtag site. I contacted him and he repaired boot with jtag.
Sent from my WT19i using xda app-developers app
pl update
ajay74 said:
So friend at last it got fixed. Thanks to jtag box . I got delhi's dealer's address from official jtag site. I contacted him and he repaired boot with jtag.
Sent from my WT19i using xda app-developers app
Click to expand...
Click to collapse
hi Ajay
can u pl. update the procedure by wch u recovered your phone, as it will behelpfull to many others..
a guy Manpreet is facing the similar issue.
It wud be a gr8 help.
pl update it in detail
Many Thanx
Dear friends
The process is bit typical here you need a jtag box and jtag cable. Basically in case of bricking boot file gets corrupted/ damaged. The jtag cable is inserted beneath the battery after removing the sticker beneath battery for boot repairing I advise you to look for suppliers of jtag box from their official site.
And then contact the local jtag box owner. Apart from that there is no other option. I have tried ODIN Multi Downloader it was not getting any response from mobile as mobile was not going into download mode. I tried jig cable too but it was not unsuccessful
After a month I checked jtag box site and got the address of their Delhi dealer and then I got my boot repaired and downgraded to Froyo.
Sent from my WT19i using xda app-developers app
Related
Well, I have LG Optimus P-920
since morning working on CM 7 Nightly 23
today I was replaced sdcard to 32GB 10, reboot phone and.... nothing
even pwr+vol up not working, totally not responding
I've tried reflash on LG flash tool but after connect to usb with vol up computer recognize omap4430, thats ok, but that device blinking in device manager, one second is there, one not , no LG USB CDMA serial port
what should I do in that case, please help me
You replaced sd card. Did you try switching back some times s*** messes up. And doing the follow steps you listed. Throw some tips guys. Bump.
Sent from my LG-P925g using XDA App
winb87 said:
You replaced sd card. Did you try switching back some times s*** messes up. And doing the follow steps you listed. Throw some tips guys. Bump.
Sent from my LG-P925g using XDA App
Click to expand...
Click to collapse
switching back ?
You switched sd card? Switch back to the one you had before.
Sent from my LG-P925g using XDA App
winb87 said:
You switched sd card? Switch back to the one you had before.
Sent from my LG-P925g using XDA App
Click to expand...
Click to collapse
switched back, still no response..:/
I posted a thread with the same issue a few weeks back.
No, it's not the end of your phone. You'll need xp/7 to repair the phone (since I'm on linux I can't currently repair it).
Use the LG tool, remove battery and insert it back, plug in usb and hold pwr+volup(or down) can't remember which one. Your PC will find a OMAP4430 device.
There is a few threads how you can repair your phone using emergency mode in the LG tool, you'll need to enter your IMEI etc.. Look in the Development section and look for the right thread.
My thread:
http://forum.xda-developers.com/showthread.php?t=1439373
I've tried that resolution, but t dont works, omap4430 blinking in device manager, cant use lg flash tool
Did you really press the right volume button? I've had that blinking-problem,too, until I pressed the other volume button instead.
And there's no need holding the power-button for doing this.
w8st8 said:
Did you really press the right volume button? I've had that blinking-problem,too, until I pressed the other volume button instead.
And there's no need holding the power-button for doing this.
Click to expand...
Click to collapse
I think...... but I'll try again
trying......still blinking
please give me what should i do step by step, any sequence I tried doesn't work still blinking
Remove battery and blink will stop!
ul71m0 said:
Remove battery and blink will stop!
Click to expand...
Click to collapse
still blinking, even after battery removing
andriu123 said:
still blinking, even after battery removing
Click to expand...
Click to collapse
Try reading this
http://forum.xda-developers.com/showthread.php?p=21096612
good luck
You could get it back andriu? I'm in the same situation, the pc still blinking in any combinations and the driver omap 4430 never installed.
Sorry for my bad english.
vanpe said:
You could get it back andriu? I'm in the same situation, the pc still blinking in any combinations and the driver omap 4430 never installed.
Sorry for my bad english.
Click to expand...
Click to collapse
my english is poor to
about phone, hmm
today he went to service warranity , no solution has helped, i tried everything
we'll see what say service engineers, I hope that will fix him
andriu123 said:
my english is poor to
about phone, hmm
today he went to service warranity , no solution has helped, i tried everything
we'll see what say service engineers, I hope that will fix him
Click to expand...
Click to collapse
You tried to install the drivers from xp? I'll try this before use the warranty.
How much time have your O3D?
tried on XP, Vista, 7
O3d have since about six months
Have you tried different USB cable? Had same problem with Odin and Galaxy S2, odin would fail flashing and not detected sometimes.
Sent from my GT-I9100 using XDA App
MemoryController said:
Have you tried different USB cable? Had same problem with Odin and Galaxy S2, odin would fail flashing and not detected sometimes.
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
Yes I have tried differents USB cables (3 concretely). I'm desperate.
Once I bricked my phone y recovered it installing all the drivers including the omap one and using the kdz falshing tool.. if the omap chip is still functioning there is still a chance
josuelopezv said:
Once I bricked my phone y recovered it installing all the drivers including the omap one and using the kdz falshing tool.. if the omap chip is still functioning there is still a chance
Click to expand...
Click to collapse
Where do you get the omap drivers? Automatically whit the O3D in emergency mode?
My computer detects that driver but not install it, seems like a bucle try/error/try/error.
Few days later i tried to flash firmware 2.3.4 to my galaxy fit via odin but the process failed and after it my phone does't boot and not going into download mode...the phone has only a blank screen no key is working...when conected to charger a little beeping sound is produced but the screen remain black...then i take the phone to care centre in my area he tried a usb jig but nothing happend the phone still dead...please help me i am in a big problem i love my phone and don't want to lose it...:crying:
Try this
manpreet135 said:
Few days later i tried to flash firmware 2.3.4 to my galaxy fit via odin but the process failed and after it my phone does't boot and not going into download mode...the phone has only a blank screen no key is working...when conected to charger a little beeping sound is produced but the screen remain black...then i take the phone to care centre in my area he tried a usb jig but nothing happend the phone still dead...please help me i am in a big problem i love my phone and don't want to lose it...:crying:
Click to expand...
Click to collapse
Try this...
1. Install mobile drivers on pc and open Odin.exe
2. Connect phone to pc. Remove the battery.
3. Now, hold down VOLUME(-) and HOME key and POWER key together to get download mode.
4. While holding these 3 keys, (and your phone stll connected to pc) insert the battery.
Now Odin should detect your phone. If still it doesn't , then take it to the center.
If odin detects phone, flash the official firmware.
Hope it helps.
That Does't Work
Mr.Attitude02 said:
Try this...
1. Install mobile drivers on pc and open Odin.exe
2. Connect phone to pc. Remove the battery.
3. Now, hold down VOLUME(-) and HOME key and POWER key together to get download mode.
4. While holding these 3 keys, (and your phone stll connected to pc) insert the battery.
Now Odin should detect your phone. If still it doesn't , then take it to the center.
If odin detects phone, flash the official firmware.
Hope it helps.
Click to expand...
Click to collapse
I have tried all the tricks but no one is working even the Technician has tried the JIG but it also give no Help...if you know any other effective hardware or software to fix this problem than pls tell me......and I also heard about JTAG BOX...can this hardware fix my problem?,this should not be as a JIG coz JIG can't solve my problem and from where i can get this if the care centre or technician haven't...
Mr.Attitude02 said:
Try this...
1. Install mobile drivers on pc and open Odin.exe
2. Connect phone to pc. Remove the battery.
3. Now, hold down VOLUME(-) and HOME key and POWER key together to get download mode.
4. While holding these 3 keys, (and your phone stll connected to pc) insert the battery.
Now Odin should detect your phone. If still it doesn't , then take it to the center.
If odin detects phone, flash the official firmware.
Hope it helps.
Click to expand...
Click to collapse
Exactly what I posted. Thanks for telling...
Sent Via XDA™ Premium
option 2
here is the thread <http://forum.xda-developers.com/showthread.php?t=1349547>
by Ajay: Thanks to jtag box . I got delhi's dealer's address from official jtag site. I contacted him and he repaired boot with jtag.
he was able to solve his issue.
contact or PM him for ur concern
---------- Post added at 12:35 PM ---------- Previous post was at 12:30 PM ----------
Galaxy_Rohit said:
Exactly what I posted. Thanks for telling...
Sent Via XDA™ Premium
Click to expand...
Click to collapse
hmm
Mr.Attitude02_ROHIT took help from Galaxy_Rohit
just thot ur comment wud solve his prob.
manpreet135 said:
I have tried all the tricks but no one is working even the Technician has tried the JIG but it also give no Help...if you know any other effective hardware or software to fix this problem than pls tell me......and I also heard about JTAG BOX...can this hardware fix my problem?,this should not be as a JIG coz JIG can't solve my problem and from where i can get this if the care centre or technician haven't...
Click to expand...
Click to collapse
Here's the Jtag box dealers' list
http://www.jtagbox.com/category/jtag-dealers/
Here're the shops where you can unbrick your phone
http://www.jtagbox.com/riff-jtag-bo...s-unbrick-bricked-phone-riff-box-owners-list/
And here's the official page of RIFF JTAG Samsung Galaxy Fit GT-S5670 unbrick BOOT REPAIR SUPPORTED
www.jtagbox.com/jtag-news/riff-jtag-samsung-galaxy-fit-gts5670-unbrick-boot-repair-supported/
Sent Via XDA™ Premium
Hi guys,
i have Galaxy Tab 2 hard bricked. Can't turn it, nothing happens when trying to turn on or charge. Absolutely dead. It is dead after i've tried to enable swap on rooted device.
Please help me
Wat was ur last ROM stock or else?
Did u tried it to connect in download mode to PC?
Sent from my GT-P3100 using xda premium
Please be more brief.
What did you do?
What did you try?
When plugged in to a computer, does it recognize it?
Does ODIN recognize it?
And if all fails and you are ready to go hardmode:
https://www.youtube.com/watch?v=Ami4TQH3cmc
jyeshta001 said:
Wat was ur last ROM stock or else?
Did u tried it to connect in download mode to PC?
Sent from my GT-P3100 using xda premium
Click to expand...
Click to collapse
It was stock ROM. I've installed only cwm-root-gtab2a and GT-P5100_ClockworkMod-Recover - this files. And all was fine.
I can't turn it to download mode.
When i tried to connect to PC i hear sound like device attached and from 3-5sec I hear 'device unattached' sound. This device is 'TI board'
suka_narkot said:
It was stock ROM. I've installed only cwm-root-gtab2a and GT-P5100_ClockworkMod-Recover - this files. And all was fine.
I can't turn it to download mode.
When i tried to connect to PC i hear sound like device attached and from 3-5sec I hear 'device unattached' sound. This device is 'TI board'
Click to expand...
Click to collapse
Hay bro..... will u tell me wants ur model....?
I wanna help u coz I know wats da pain of bricking a android.....
Sent from my GT-P3100 using xda premium
My Galaxy Tab 2 is P5100. It is rooted and works fine until i've tried to tweak swap via Swapper 2.
After i've installed this app i've tried to tweak my device and reboot it. so my tab is turned off and i can't enable it.
I've installed drivers and saw 'omap 4430' device in Windows. It appears when i connect my tab via usb cable at hold power button.
Now u connect it to Odin ....did the Odin software recogniz or tab
If yess u can reflash the all things....
Sent from my GT-P3100 using xda premium
jyeshta001 said:
Now u connect it to Odin ....did the Odin software recogniz or tab
If yess u can reflash the all things....
Sent from my GT-P3100 using xda premium
Click to expand...
Click to collapse
It can't be turned on in recovery/download mode so it is not visible in ODIN.
suka_narkot said:
My Galaxy Tab 2 is P5100.
I've installed drivers and saw 'omap 4430' device in Windows. It appears when i connect my tab via usb cable at hold power button.
Click to expand...
Click to collapse
????
Sent from my GT-P3100 using xda premium
what happens when you put it on charge ? probably battery is zero
Hello, I had same symptoms with my p5100 and I can't repair it. look here http://forum.xda-developers.com/showthread.php?t=1908949
jyeshta001 said:
????
Sent from my GT-P3100 using xda premium
Click to expand...
Click to collapse
Tab should be turned on in download mode for flash via ODIN. But I can't enable it in download mode.
What happens when i connect Table to PC - I can see 'OMAP 4430 USB device' in Windows device manager. But this device is not visible and not accessible with ODIN. Nothing happens with my tablet - display is blanc, no backlight, ... :crying:
rraaka said:
what happens when you put it on charge ? probably battery is zero
Click to expand...
Click to collapse
No, battery was full-charged.
And i've plugged to charger and hold it with connected charger for 5 hours tonight - nothing, it is dead
riff box is the only way
http://www.fonefunshop.co.uk/Unlocking/riff_box.htm
morteza.ghodsi said:
http://www.fonefunshop.co.uk/Unlocking/riff_box.htm
Click to expand...
Click to collapse
I don't see that it supports the ti omap4430.
Sent from my GT-P3113 using xda app-developers app
morteza.ghodsi said:
http://www.fonefunshop.co.uk/Unlocking/riff_box.htm
Click to expand...
Click to collapse
I've visited one month ago much service centers (which used riff, medusa box, etc... ) - nobody can repair my bricked p5100 (((
merka_zh said:
I've visited one month ago much service centers (which used riff, medusa box, etc... ) - nobody can repair my bricked p5100 (((
Click to expand...
Click to collapse
Did u have any idea if you are going to repair it by Samsung how much it will cost....?
suka_narkot said:
Tab should be turned on in download mode for flash via ODIN. But I can't enable it in download mode.
What happens when i connect Table to PC - I can see 'OMAP 4430 USB device' in Windows device manager. But this device is not visible and not accessible with ODIN. Nothing happens with my tablet - display is blanc, no backlight, ... :crying:
Click to expand...
Click to collapse
Unfortunately I'm sorry to say but when to get that omap message the tablet or phone IS in fact hard bricked and is not recoverable by anything here at xda. Samsung may be able to fix it but you are probably Better off just getting a new tab man because it'll cost just as much.
I know it's hard to hear that and it really sucks.
I almost bricked this tablet too and just had to give up on it for a while because it was so frustrating. I finally found the fix.
A couple months ago these guys were posting the wrong recoveries and root files and not labeling them correctly. So you have to be real careful with this stuff because s alot of them don't know what's going on.
Sent from my SGH-T889 using Tapatalk 2
adishakthi said:
Did u have any idea if you are going to repair it by Samsung how much it will cost....?
Click to expand...
Click to collapse
1. authorised Samsung center proposed me to change board for 350$
2. i have contacts with unofficial master and he proposed me to replace internal memory card - from broken Tablet for 150$
But I've been looking for another solution and when came to service for replace internal flash memory (2 weeks ago) - they didn't have it.
So I've put it on the shelf and bought another Tablet - it is not Samsung, it is repairable device )))
Plz delete.....
Hey Friend >>
I am just sharing my experience how i lost my FIT two times .....
(1)After purchasing Galaxy fit I connected my fit with PC wia USB (just want to change from Froyo to Gingerbread).
I just swich off my phone to get into downloding mode . But just after flashing gingerbread i switch on my phone by mistake I forgot to disconnected from USb & suddenly my phone hard brick.
So never switch on or off your phone when it connected to any kind off power supply either USB or Charger.
Get back it with replacing Mother board (thanks samsung )
(2) Second time I pay 2800Rs to samsung --->I dont know exact reason but It may due using ROM MANAGER.
Before Using Rom Manager Just read XDA link
http://forum.xda-developers.com/showthread.php?t=1505717
May this will Help U.......:good:
You might have removed your fit when the flashing was in progress
Sent from my GT-S5670 using xda app-developers app
thanks for the wrongs
Hi all,
Please help... I tried to flash my SL I9003 and somehow the connection broke in between.
Now the mobile doesnt power on and when connected to the laptop, I just see the processor getting recognized and then disappears. within 2 seconds.
I tried with USB Jig but nothing happens.
Any ideas?
Please help. I dont want to loose this phone dead.
Does Odin recognize the phone? I mean, with Odin on, press volume down + power, connect it to the laptop and see if the phone goes into download mode so Odin could recognize it (COM status shown)
Hope this helps
Sent from my GT-I9003 using xda app-developers app
this should be in the general .
take out the battery. put back in and get into download mode if possible. if not, to the service center you should bring it..
Sent from my GT-I9003 using xda app-developers app
samsunggti9000 said:
I tried with USB Jig but nothing happens.
Any ideas?
Please help. I dont want to loose this phone dead.
Click to expand...
Click to collapse
your username 9000
you are sure that you are in the right section ?
If not you COME to burn your motherboard
The only solution, samsung service center with your operator
If longer supported you still have to flash the board with a Jtag repair tools Professional equipment
You shook minimum 60 € without success if really toasted your motherboard
Sincerely ...
Thank you all for ur suggestions.
@kralin, the phone doesnt get recognized using the odin. doesnt startup and no lights and no logo. I have installed the processor drivers in my windows 7 laptop and when connecting the phone, it recognizes the processor for 2 seconds and disconnects.
@imjustafq, this was the first step when I thought I bricked my phone but to no use.
@LoLaTiOn, dont worry about the username. I am in the right section.
I tried to check with Samsung center and they said they dont know what to do. not tied with any operator though..
You described the symptoms which very like hard brick like corrupted bootloader
Sent from my Galaxy Nexus using Tapatalk 2
chongns said:
You described the symptoms which very like hard brick like corrupted bootloader
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
Do we have any solutions for Hard Brick? I tried to use USB Jig but of no use.
samsunggti9000 said:
Do we have any solutions for Hard Brick? I tried to use USB Jig but of no use.
Click to expand...
Click to collapse
One and only solution is service center.
Sent from my GT-I9003 using Tapatalk 2