Hi there,
I know this is a weird question....but I really like this small portable charger that is for the iphone:
http://www.jcrew.com/browse/single_...&nav_type=SEARCH&bmUID=jKaPT92&bmLocale=en_CA
As far as I've seen, nothing is available like that for android (something very compact, no cords)
Is there an iphone 30 pin to micro usb converter? Something that I could put on top so that I could plug my phone in.
I know that there is a usb on the other end, and that I could get a usb to micro usb cord, but I'd really like to elimate the number or cords I'm carrying around.
Thanks for your help!
http://forum.xda-developers.com/showthread.php?t=1883519
Related
I bought a couple of cheap generic USB cables, one a retractable micro USB job and the other a standard USB that splits to both a mini and micro USB at the other end.
Both cables charge my phone just fine, but the phone doesn't register either cable as a data connection and no notification comes up.
Is the micro USB cable that comes with the phone industry standard, and if so does this mean that my generic cables are likely to be just off spec enough in some way that the phone doesn't register them?
Strange thing is that the mini USB end of the split cable seem to work on other things like cameras and other phones. I'm confuzzled.
when plugging in cable did you activate usb mount in the notification bar
i bought a mini to micro converter as I still have quite a few devices that need mini and thought I could save on convenience by just carrying round the adapter and plugging into existing computer cables and chargers I have around the house, car and work - Same thing with that power only, no data.
Got it from ebay some of the listings on there state "power only", still dont understand why, it cant be much more expensive to wire all 4 pins. As micro is becoming the standard.....
Harry454 said:
when plugging in cable did you activate usb mount in the notification bar
Click to expand...
Click to collapse
That's the problem, I plug the cable into the N1, but don't get a notification, no tone, nothing to suggest that the phone sees the cable as a data cable at all.
I'm guessing that if the phone doesn't think it is a data cable there is no way to persuade it otherwise.
There's essentially 2 types of cables: Charge-only or Sync & Charge. This is true for the adapters as well.
It seems you folks mistakenly bought the Charge-only cable/adapter.
After some research, I found this cable (it's blackberry branded, but works 100% with my N1 for Sync and Charge):
http://www.amazon.com/gp/product/B001UC9NOQ/ref=oss_product
It's cheap ($3 shipped), it's made by a trusted brand (Blackberry) and the actual cable is rather thickly insulated so it's durable too.
Read the user reviews, especially the guy with the high helpful votes count, for more details about charge-only and sync-n-charge cables.
Just tried both cables on a Nokia E623, and they both worked fine first time, charging and data.
Now it' looking like there is something slightly odd (or perfectly on spec) about the female Micro USB plug on the N1. Perhaps they are just made to only accept male plugs that exactly meet standard specs, and if a plug is out slightly in say it's contact positions or sizes the N1 won't detect it.
Anyone got any ideas?
If I am to get a Galaxy S Phone - or any new phone for that matter - they require Micro USB. I have a bunch of Mini USB accessories. But for some reason, I am having trouble finding Micro USB products. Where can I find some good ones?
Questions include:
Mainly, where should I look to find a good micro USB to USB, for my car?
I occasionally plug my Touch Pro into my TV with my soon to be useless Mini USB to AV Out. What do I do now? I have seen some Headphone To AV Out, do they work?
Micro USB to HDMI? Is that supported across most phones?
What kind of charger does the phone (or most phones) come with? Is it one of those AC Adapters, with the USB plug plugging into the AC Adapter? But the USB Cord is like, one foot? Will I need a regular cable too?
Questions, questions!! So many!!
So, I purchases a USB OTG cable in an attempt to try and expand the functionality of Webtop while using Nebtop. I've been unable to get any response from the phone when I plug in this cable. I've tried my wireless Logitech mouse and keyboard that worked off the bat with my TF101 using the Unifying remote they came with as well as an external TB drive.
Has anyone else had any experience with this? It seems logical that the phone supports host mode since the actual dock has 3 full sized USB ports.
All the information pertaining to this sort of thing I've come up with seems extremely phone specific but if there's a simple solution I'm missing thanks all the more.
ri4naire said:
So, I purchases a USB OTG cable in an attempt to try and expand the functionality of Webtop while using Nebtop. I've been unable to get any response from the phone when I plug in this cable. I've tried my wireless Logitech mouse and keyboard that worked off the bat with my TF101 using the Unifying remote they came with as well as an external TB drive.
Has anyone else had any experience with this? It seems logical that the phone supports host mode since the actual dock has 3 full sized USB ports.
All the information pertaining to this sort of thing I've come up with seems extremely phone specific but if there's a simple solution I'm missing thanks all the more.
Click to expand...
Click to collapse
The problem actually lies in the usb port of the phone itself. The dock was designed for this purpose, and the dock app handles most that for you, the one thing that the dock is able to do that a straight USB cable can't do, is provide enough "bus" power to use a mouse or even a USB stick directly from the phone. If you want to use a Mouse you will need to get a dock. I got mine directly from wireless.att.com, and it was only $49.00 back in Nov. when I got it. It works VERY well with webtop.
P.S. Motorola is very famous for doing things like this to force you into a dock, or to lock out certain features that everyone really wants to use.
I made my own dock by using a powered usb hub I had sitting around (it was actually the one that came with Rock Band for my Xbox 360). I did have to modify it slightly so that the 1 pin was powered from the 5V (a simple shunt from the 5V inner pin of the power supply solder joint to the solder joint of the 1 pin worked fine--although it might be wise to insert an inline fuse since it also charges your phone while plugged in).
Otherwise, the only other thing needed is coming in the form of your otg adapter that should short the 5 pin (common) with your 4 pin (ID). I did this by cracking open an extra micro usb cable and soldering a wire between the two.
So, my setup was like this:
1. Modified usb cable to short the 4 & 5 pins to let the phone know to go into host
2. Use a female A-female A usb coupler to join the usb cable to the powered hub (I got mine here from Monoprice
3. Get 5V to the 1 pin in the usb hub to provide power to your phone and for whatever is plugged into the hub.
With this, I was easily able to run a usb mouse and a wireless keyboard that had a usb dongle. Paired with a micro hdmi cable to hdmi-dvi adapter, I am able to use my office monitor and the webtop linux. I honestly haven't really used it much yet (if I found it really useful, I probably would have just paid for the dock).
The obvious easy way is to just get the dock. However, I really like being able to do this on my own and since I had this stuff already laying around. Also, the cheap prices from monoprice (I actually made $4 off of the purchase from a PayPal bill-me-later promotion).
So, you should be able to get it to work if you get power to the bus on your usb (but again, it might be safe to pass an appropriate fast-acting fuse, ferrite core, or something to protect from surges). I haven't had issue yet, but I also don't use it often...yet .
It sounds like a bit of yes and a bit of no. The OTG cable I got is microUSB to female full USB, am I going to need to modify this cable as you've described by crossing the 4th and 5th pins?
I'm thinking about ordering this "7 Port USB Squid Hub" since it has the 5v power adapter, do you think it might work?
Just one more question and thanks for all the help but should I not see any response from the phone when I plug in the cable? I read through some of the reviews for cheap cables on Amazon and apparently sometimes they're just useless.
ri4naire said:
It sounds like a bit of yes and a bit of no. The OTG cable I got is microUSB to female full USB, am I going to need to modify this cable as you've described by crossing the 4th and 5th pins?
I'm thinking about ordering this "7 Port USB Squid Hub" since it has the 5v power adapter, do you think it might work?
Just one more question and thanks for all the help but should I not see any response from the phone when I plug in the cable? I read through some of the reviews for cheap cables on Amazon and apparently sometimes they're just useless.
Click to expand...
Click to collapse
The OTG cable have should work. The OTG cable, to my knowledge, should already have pins 4 & 5 shorted together. I'm not completely certain, but if it's designed as an OTG, it would probably already have that done. If you have an ohmmeter/multimeter, you could try to check (it's hard to isolate the small pins, but you can try). If it's already going to the USB female (type A), you will then be able to directly attach your hub when you get it (without the need of the coupler I had to get).
When I used mine, there was no notification that said "Hey, I'm in USB Host Mode!". However, if you successfully have a mouse attached, you'll see a mouse cursor arrow on your screen.
Have fun with it and if you can't get it to work, let me know and I'll try to explain with even more detail (perhaps with some pretty pictures) of what I did. I more or less went off of what I could glean from reading what others did.
It works great! Also, it is weird to see the mouse on this little a screen, it seems oversized.
I just plugged everything in and it worked off the bat. I'm using just two items from Amazon I got for under 12 bucks (plus, of course, the keyboard and mouse I already had for my computer). I don' think I can post links to the forums yet but the ASINs for the items if people want to do this on the super cheap are as follows:
B0043TBCDS 7 Port USB Squid Hub, a whopping $5.19
B005N55WHI Micro-B USB OTG Cable... $5.99
I chose these because of their Prime eligibility and also for their form factor so as not to cover the HDMI port, I bet it's not impossible to get these even cheaper.
While this isn't technically a replacement for the dock since I had to root the device and I have to press "Load" in Nebtop if I want to go to Webtop I'm extremely pleased with the results.
I also love that all the soft keys are available. The ones I've discovered are that right button on the mouse as well as Esc are Back, the Home key is Home, clicking the wheel as well as Ctrl, Cmd, Alt and a whole slew of others bring up the Menu, but all I can find is F5 for Search.
On another note, while the phone does charge when hooked up, a practical boon, the screen still times out despite having the "Stay awake" feature checked. This is annonying when the phone is on it's side accross the room and I have to squint to see the cursor and swipe it unlocked sideways as well as click back into Mirror Display.
I picked up a SanDisk Dual USB drive, and although it works well, I was disappointed to see it's a bit too big to work with the bumper case I use. I briefly considered modifying the case, but think my best option is getting a short USB extension cable... Though I thought that would be a simple and cheap solution. After a little looking around though, I'm not sure I know what micro usb extension I need - MHL, OTG, Power? As best as I can tell, I need what they're marketing as a micro to micro OTG extension - but if someone can confirm, I'd appreciate it. My concern comes from comments on some saying they don't work for charging or syncing (search for "YCS Basics 6 inch USB Micro male to female OTG extension cable" on amazon), but it sounds like the mhl cable is just for HDMI.
Help?
Just get a small USB OTG cable. I use one sometimes with my Corsair OTG drive and it works great. Not all of my cases will let me lug the micro USB in easily hence why I have a small OTG cable. I can post pictures if you would like.
MotoManic said:
I picked up a SanDisk Dual USB drive, and although it works well, I was disappointed to see it's a bit too big to work with the bumper case I use. I briefly considered modifying the case, but think my best option is getting a short USB extension cable... Though I thought that would be a simple and cheap solution. After a little looking around though, I'm not sure I know what micro usb extension I need - MHL, OTG, Power? As best as I can tell, I need what they're marketing as a micro to micro OTG extension - but if someone can confirm, I'd appreciate it. My concern comes from comments on some saying they don't work for charging or syncing (search for "YCS Basics 6 inch USB Micro male to female OTG extension cable" on amazon), but it sounds like the mhl cable is just for HDMI.
Help?
Click to expand...
Click to collapse
Can you return it for the new USB 3.0 model? Supposedly they made the uUSB connector longer to work with more cases.
Note10.1Dude said:
Can you return it for the new USB 3.0 model? Supposedly they made the uUSB connector longer to work with more cases.
Click to expand...
Click to collapse
Really? That would have been great... but no. Or maybe... but probably not worth it to me at this point. I got a standard OTA cable and have just been living with it that way. And I haven't looked, but I'd have to think they're charging a premium for the 3.0 enhancement. I bought mine during one of those Christmas sales, so I got it real cheap at the time. Thanks though.
See, my phone (Moto X 2013) supports OTG, but does not have a micro SD slot.
It only has 16 GB of storage which has proven to fall short for my needs because I love listening to music on the go, and I have a lot of music.
Another thing is that the USB port of my phone has some short of false contact after years of use, so sometimes a little wiggle can make it disconnect, this is the main reason why I want the USB to be so small, so that when I walk with it on my pocket, it doesn't get disconnected because I touched it 'wrong'.
So that's the question, do you know of any small micro USB device (without the need of a micro USB adapter because it adds length and volume)?
Something like the Sandisk Cruze but on a micro USB form, something that looks more like the USB plug of a wireless keyboard than a USB storage device. Thank you.
As a side note, I was thinking of those phone cases that serve as external batteries, well if there was something like that but that served as a micro SD to micro USB adapter, I could use that. The thing is that I have seen no such thing for sale and even if there was, I doubt I would be able to find one for my exact phone model from 7 years ago.