Related
If you did something like install custom recovery on your lg optimus one and failed, you would get a black screen saying..
fastboot mode started
udc_start()
If this happens...
Relax.. Your phone is not bricked.. There are many ways to fix it... This method of unbricking should be done as a last resort because it erases all your data...
Charge your phone before proceeding even if the backlight is always on while charging..
Things required:
Kdz updater:
http://forum.xda-developers.com/showpost.php?p=8651505&postcount=1
Stock ROM:
http://forum.xda-developers.com/showthread.php?t=865479
USB cable, Windows PC with administrator account,LG united mobile drivers(google for it if you don't find it in the "Add or remove programs" window in the control panel)..
First disable all LGE modems under modems from Windows device manager in the Control Panel..
Make sure you have LG united mobile drivers installed.. Or just google for it..
Then press and hold both the back(return) button and the volume up button and simultaneously connect the USB cable..
The phone should light up and say Emergency mode!! in a green background.. If it goes to Emergency mode, it can be fixed... If it doesn't I'm sorry, search for an other forum or give it to the LG service center...
Now decompress the 7z file you downloaded using WinZip, WinRar etc., install msxml.msi from the uncompressed directory and run KDZ_FW_UPD.exe (With administrator rights by right clicking and selecting run as administrator).
In the dialog box, select Type : 3GQCT and PhoneMode: DIAG, select the kdz file and flash the stock ROM... It would take about 15 minutes.. If the kdz updater crashes, change compatibility mode or restart the computer and phone or do something till it works (Retry retry retry)...
For most of you it would probably say PHONE WAS NOT FOUND!.... If so, then follow all the steps said above, but this time, shake the life out of your phone after connecting the USB till the lines "PHONE WAS NOT FOUND!" stops appearing... If it does appear again retry for endless times or restart the computer or check if any modem drivers are active or try it in an another computer...
From here on, follow any one choice:
Choice 1:
Note: There is a fat chance for this choice to not work and for you to go back to the very first line of this thread...
If you want your phone to have all the data before you bricked it, just disconnect the USB when the phone shows the charge screen as if you are charging the phone while it is switched off.. (This was discovered accidentally by me so try it at your own risk ) After disconnecting try to power on the normal way and it should work and the phone should be like it was never bricked.. If it doesn't boot, retry flashing from the start.. If it starts and all your data is restored root it, install titanium backup and backup all your apps and data and save the contents of sdcard\titaniumbackup to your pc.. Then copy all you want in your sdcard to your pc.. Then redo all the steps without disconnecting till the kdz flasher says FINISHED.. This is because if you disconnect the usb in the middle, only half the rom would be installed which is unstable.. After installing the full rom, root it, and install titanium backup and copy all the copied content back to sdcard\titaniumbackup and restore them using titanium backup.. That's it..
Choice 2:
If you do not want the data and if you need to do a risk-free unbrick, then flash with the kdz updater and wait till it says FINISHED.. That's it..
Now that you know how to unbrick, try installing what bricked your phone again but this time in the correct way... GOOD LUCK...
AND FINALLY.... ONE MORE STEP.... PRESS THE "THANK" BUTTON IF I HELPED YOU IN ANY WAY...
where do you get kdz?
ljohnson1981 said:
where do you get kdz?
Click to expand...
Click to collapse
Links have been included...
ganesh3s3 said:
If you did something like install custom recovery on your lg optimus one and failed, you would get a black screen saying..
fastboot mode started
udc_start()
If this happens...
Relax.. Your phone is not bricked.. There is a way to fix it...
First disable lg modem from windows device manager..
Make sure you have lg universal driver installed.. Or just google for it..
Charge your phone before proceeding even if the backlight is always on..
Things required:
Kdz updater:
forum.xda-developers.com/showpost.php?p=8651505&postcount=1
Stock rom:
forum.xda-developers.com/showthread.php?t=865479
Usb cable, windows pc
Then press and hold both the back(return) button and the volume up button and simultaneously connect the usb cable..
The phone should light up and say Emergency mode!! in a green background..
Then decompress the 7z, install msxml.msi from the uncompressed directory and run KDZ_FW_UPD.exe (Has administrator).
Select Type : 3GQCT and flash the stock rom... It would take about 15 minutes.. If the kdz updater crashes, change compatibility mode or restart or do something till it works...
If you want your phone to have all the data before you bricked it, just disconnect the usb when the phone shows the charge screen as if you are charging the phone while it is switched off.. (This was discovered accidentally by me so try it at your own risk) After disconnecting try to power on the normal way and it should work and the phone should be like it was never bricked.. If it doesn't boot retry flashing from the start.. If it starts and all your data is restored root it, install titanium backup and backup all your apps and data and save the contents of sdcard\titaniumbackup to your pc.. Then copy all you want in your sdcard to your pc.. Then redo all the steps without disconnecting till the kdz flasher says FINISHED.. This is because if you disconnect the usb in the middle, only half the rom would be installed which is unstable.. After installing the full rom, root it, and install titanium backup and copy all the copied content back to sdcard\titaniumbackup and restore them using titanium backup.. That's it..
If you do not want the data and if you need to do a riskfree unbrick, then flash with the kdz updater and wait till it says FINISHED.. That's it..
Now that you know how to unbrick it, try installing what bricked your phone again but in the correct way... GOOD LUCK...
THANK ME IF I HELPED YOU...
Click to expand...
Click to collapse
i tried this but got msg:
[R&D Test Tools Log File]
12:20:25 : Launching SW update
12:20:25 : Unpacking KDZ
12:20:31 : KDZ file extraced
12:20:32 : Files were extracted.
12:20:32 : LGMobileDL Load.
12:20:32 : Port = 3
12:20:32 : Connecting to phone
12:20:37 : PHONE WAS NOT FOUND!
12:20:39 : ===FINISHED===
what to do????? i am using xp64....... what do you mean by (Has administrator).
Please help or i to go LG service center???
Thanks in advance
maxupload said:
i tried this but got msg:
[R&D Test Tools Log File]
12:20:25 : Launching SW update
12:20:25 : Unpacking KDZ
12:20:31 : KDZ file extraced
12:20:32 : Files were extracted.
12:20:32 : LGMobileDL Load.
12:20:32 : Port = 3
12:20:32 : Connecting to phone
12:20:37 : PHONE WAS NOT FOUND!
12:20:39 : ===FINISHED===
what to do????? i am using xp64....... what do you mean by (Has administrator).
Please help or i to go LG service center???
Thanks in advance
Click to expand...
Click to collapse
By (has administrator) I meant to run kdz with administrator user account rights..
And for your phone not found problem, did you uninstall everything that I listed? If so then you should shake the phone more vigorously from plugging your phone to usb till the phone is found, seriously. If it is still not found, review if you have followed my instructions without leaving a single one out and retry till you suceed... Best of luck... Any more help.. Ask me.
ganesh3s3 said:
By (has administrator) I meant to run kdz with administrator user account rights..
And for your phone not found problem, did you uninstall everything that I listed? If so then you should shake the phone more vigorously from plugging your phone to usb till the phone is found, seriously. If it is still not found, review if you have followed my instructions without leaving a single one out and retry till you suceed... Best of luck... Any more help.. Ask me.
Click to expand...
Click to collapse
when i try to run updater as administrator in winxp 64 it is asking for password ??? i didint set any password...and default user have administrator right without any password....what to do.....bit tense please help me out..... please
maxupload said:
when i try to run updater as administrator in winxp 64 it is asking for password ??? i didint set any password...and default user have administrator right without any password....what to do.....bit tense please help me out..... please
Click to expand...
Click to collapse
Ok if you can't run it as an administrator try skipping that step and try connecting your phone without admin till your is found.. Try SHAKING...
If it doesn't work.. Take your phone and equipment to your friends home which has admin rights...try till you suceed because it usually is a painfree process.. You can fix your phone if it goes to emergency mode... Dont worry.. feel free to ask for help...
Did my P500 Dead?
Hi there,
I had LG P500 with firmware 2.2.1 10e. And The 2.2.1 cannot be root. So i down it to 2.2 and 10b indian. And I use thunderg....recovery from xda. And then i update it vai recovery by applying update.zip and finally i had 2.3.1. It work great but the camera not work, So i decided to down to 2.2 but while i update using kdz updater It just running to param : 36....it stop and show upgrade error. While my phone in emergency mode i removed battery and open it back. It just show Lg logo and at the moment all my home...back...button light was always blink , it just keep at lg logo screen!!! ....
. Too much sorry for my English cuz it not my native i come from Cambodia. And too much much and more thank if you could help me.
SmartLCN said:
Hi there,
I had LG P500 with firmware 2.2.1 10e. And The 2.2.1 cannot be root. So i down it to 2.2 and 10b indian. And I use thunderg....recovery from xda. And then i update it vai recovery by applying update.zip and finally i had 2.3.1. It work great but the camera not work, So i decided to down to 2.2 but while i update using kdz updater It just running to param : 36....it stop and show upgrade error. While my phone in emergency mode i removed battery and open it back. It just show Lg logo and at the moment all my home...back...button light was always blink , it just keep at lg logo screen!!! ....
. Too much sorry for my English cuz it not my native i come from Cambodia. And too much much and more thank if you could help me.
Click to expand...
Click to collapse
Try my above method again and again and if it doesn't work try an another firmware or on an another computer... If nothing works then stick with the 2.3 if you can boot into recovery...
LG P500 does not care
Hello everybody I'm new to the portal, I had tried to update my phone, he was given an error now will not turn anyone knows how to help me I thank you
hug
Doors it show any error when booting or wont even switch on... If it lights up, Try my method...
Sent from my LG-P500 using XDA Premium App
i know it says for lg optimus one but is there a way that it will work for lg optimus v?
still stuck in android logo even after following all the procedures
can anyone help me
eventhough i had successfully change the firmware of phone, it still boot loop in androind logo i dont know what to do
ty
maxupload said:
i tried this but got msg:
[R&D Test Tools Log File]
12:20:25 : Launching SW update
12:20:25 : Unpacking KDZ
12:20:31 : KDZ file extraced
12:20:32 : Files were extracted.
12:20:32 : LGMobileDL Load.
12:20:32 : Port = 3
12:20:32 : Connecting to phone
12:20:37 : PHONE WAS NOT FOUND!
12:20:39 : ===FINISHED===
what to do????? i am using xp64....... what do you mean by (Has administrator).
Please help or i to go LG service center???
Thanks in advance
Click to expand...
Click to collapse
i have got same probem
lg drivers installed, LGE modem disabled
win xp 32bit
It may work on Optimus V... Try it out...
Sent from my LG-P500 using XDA Premium App
alphamale20 said:
can anyone help me
eventhough i had successfully change the firmware of phone, it still boot loop in androind logo i dont know what to do
ty
Click to expand...
Click to collapse
Try my method and say if it works... Reflashing the firmware should do it...
Sent from my LG-P500 using XDA Premium App
guys pls help....emergency mode is not comming when iam pressing that key combination..i think i bricked my phone.....help plss...
i unbricked my phone..still i cant believ i did that.......spend one complete day for it.....in KDZ updater you should select emergency mode instead of DIAG.....dont forget to disable the LG modem in device manager...and also make sure that your downloaded firmware file is working......best of luck guys....
alxbsl96 said:
guys pls help....emergency mode is not comming when iam pressing that key combination..i think i bricked my phone.....help plss...
Click to expand...
Click to collapse
Either you completely bricked your phone or there is no charge left in it... Try charging for sometime and Try...
pkosnovsky said:
i have got same probem
lg drivers installed, LGE modem disabled
win xp 32bit
Click to expand...
Click to collapse
Try shaking more or try it in all three modes where you selected diag ... try every combo till you succeed... Best of luck....
I just picked up a used LG O3D P925 that has no connection to any network (well wifi works). When I tried to update using the LG mobile update tool. I had a no success detecting automatically so I clicked recovery and manually entered the IMEI and S/N. Soon I got a failure error. Prior to this I read a thread about OTA firmware updates but I have no button for OTA update.
I tried rooting using megatron (windows version) and installed the LG drivers but windows keeps detecting new hardware and wants me to install drivers. When I click run it just says "daemon started" and I wait for a couple of minutes and .... nothing. When I check the apns either none are listed or I get a message about "reorganizing internal processes. please try again later " ...
I contacted someone who had their phone replaced by carrier for same issue. Possibly the carrier has blocked the phone from network? ...O I hope not
.... Help !?
is it a stock rom goto play store dl get ril what does it say. sounds like bad based band
Post-:
Rom:
Baseband:
RIL:
GetRIL says "unknown RIL found" (gives me an md5sum)
for Baseband it says XMM6360
then there are 3 options to DL but since I don't have root I am unable to DL these updates ... says " no permission".
here is the info from about:
LG- P925g
Android Version 2.2.2
Baseband Version L6260_MODEM_SIC_01.1042.00
Kernal Version 2.6.35.7
Build number FRG83G
Software Version LGP925g-V10c-JUL-20-2011
ok I have succeeded getting root using Unlock Root. Now when I open getRIL and select a RIL to DL the "ok" button is "greyed out" or not available, just the cancel button. So after I cancel and select another RIL to DL & install I get the superuser permisson granted message followed by a message that says "The system partition needs to be writable.... and back to the greyed out ok and cancel choice.
vumanizer said:
GetRIL says "unknown RIL found" (gives me an md5sum)
for Baseband it says XMM6360
then there are 3 options to DL but since I don't have root I am unable to DL these updates ... says " no permission".
here is the info from about:
LG- P925g
Android Version 2.2.2
Baseband Version L6260_MODEM_SIC_01.1042.00
Kernal Version 2.6.35.7
Build number FRG83G
Software Version LGP925g-V10c-JUL-20-2011
Click to expand...
Click to collapse
I see imei could have been damaged uhm try updating to V20C see if it helps
How to Update
Offline Update
V20C_00.kdz
Megatron Root
Recovery
if you do this and still no network try This its for LG Optimus Black but may work on p925g. Also Make sure phone not in airplane mode.
Thanks for your help decomfg .
I tried flashing but it seems I'm still having trouble with this computer recognizing this device. Here is the log file:
[R&D Test Tools Log File]
18:04:24 : Start fn_StartUpgrade
18:04:24 : Extract kdz file
18:05:26 : kdz decrypt Success
18:05:38 : Extract file Success.
18:05:38 : LGMobileDL Load.
18:05:38 : Port = -1
18:05:38 : Connection check start.
18:05:38 : Port(or Device) Not Found!
18:05:40 : Finish All test
when you try to flash the kdz do u put the phone in download mode try this guide
http://forum.xda-developers.com/showthread.php?t=1491870
you want part 3
xstokerx said:
when you try to flash the kdz do u put the phone in download mode try this guide
http://forum.xda-developers.com/showthread.php?t=1491870
you want part 3
Click to expand...
Click to collapse
I seem to get hung up on the step where you check the device manager for current active "COM" ports. When I connect the USB (holding vol up + power) I get OMAP4430 appearing for a second under ports and I get the "windows has detected new hardware" flashing on and of simultaneously. The phone doesn't seem to want to boot into download mode and it doesn't vibrate after 3 seconds.
vumanizer said:
Thanks for your help decomfg .
I tried flashing but it seems I'm still having trouble with this computer recognizing this device. Here is the log file:
[R&D Test Tools Log File]
18:04:24 : Start fn_StartUpgrade
18:04:24 : Extract kdz file
18:05:26 : kdz decrypt Success
18:05:38 : Extract file Success.
18:05:38 : LGMobileDL Load.
18:05:38 : Port = -1
18:05:38 : Connection check start.
18:05:38 : Port(or Device) Not Found!
18:05:40 : Finish All test
Click to expand...
Click to collapse
Delete All Lg Drivers and Software Run CCleaner and clean registry then reinstall LG PC Suite IV
CCleaner
PC Sync
On The Phone Goto Settings/Applications/Debugging/ Make sure ADB is ticked and then try flash it again try a diff usb port also make sure its not plugged into a usb hub. if it fails again i think the problem is with pc not the phone
Try connect device without battery and with holding vol up. Then after device is connected (wait 20 sec wile holding vol up) reinsert battery and start update.
Sent from my LG-P920 using XDA
if it keeps connecting and the disconneting try this. attach usb cable to PHONE only then take your battery out, then put battery back in and quickly press volume up button and then attach usb cable to PC. keep hold of volume up button all time dont let go and install all drivers omap, usb driver etc.
hope it helps
I have managed to make things worse ... :crying:
Now my phone is stuck on the AT&T boot screen. The only way I can power off is to remove the battery.Yes I tried flashing the v20P kdz after I thought I could do much worse.
I no longer have a problem getting my computer to recognize the drivers. I'm not sure if I flashed the v20C kdz without a problem or not. I thought I was able to root and things were ok except that I still had no network connectivity. I don't recall exactly what I tried next but I think I lost root somehow and some of the installed apps began misbehaving. I also noticed that superuser was not installed. I tried to root again but couldn't. I treid to flash a kdz again but again not very successfully. I also tried repairing the IMEI using this guide http://forum.xda-developers.com/showthread.php?t=1734330
I flashed the CP ? but didn't manage to restore the imei.
Now I when I power on I get the AT&T animation ... I tried to flash back to the 20C kdz without and luck. Now I have no idea where to go from here and would be grateful for some input.
try updating again but let the process fully complete http://forum.xda-developers.com/showthread.php?t=1244490
If you were stuck on the art boot screen after flashing v20p you should have don't a hard reset and wiped all data. I had the same issue when going from v10k to v20p. As far as the no signal goes I'm not sure but it could be a bad radio or it could have been stolen and deactivated by AT&t
Sent from my LG-P925 using Tapatalk 2
hi have been trying to update to 4.0 via flash tool but ive tried everything and cannot get it to work......ive been trying for 3 days and ive pretty much had enough of trying on my own so i though id would ask for help.
ok firstly i am on gb 2.3 im running custom cm7 no probs but i wana take the next step 4.0 so....i have all lg flash tool etc and fast load etc all nessacary files needed but for some reason my phone wont connet and flash its doing my head in. i have it into download mode, battery out etc but after that nothing i cannot progress further its like the program wont connect/register the phone.
im running win7 i even looked into other post and thought this maybe the problem but i have already installed these when gone into download mode as said here If you plug your Phone on PC without battery, OMAP4430 device appeared for seconds and then disappeared in your Windows Device Manager
(check arsen4oo photo guide in post #3)
On windows 7 sometimes OMAP4430 flashes too fast so you cant install driver.
There is a a windows feature that will help you install the driver easier.
To view devices that were once installed but are no longer attached to the computer, open a Command Prompt window using the Run As Administrator option and enter the command:
SET DEVMGR_SHOW_NONPRESENT_DEVICES=1
Then, from the same command prompt, type devmgmt.msc to open Device Manager. Choose View, Show Hidden Devices. The new instance of Device Manager will show “ghosted” entries for devices that were once present. This technique is especially useful for fixing problems caused by leftover drivers after replacing a network card or video card—you can easily delete the ghosted device or update the OMAP4430 driver.e
i just dont know what im doing wrong
cheers in advance
HI,
Please uninstall all LG drivers, and start again. If you are using WIN7, run it with WINXP SP3 compatibility mode.
Getting the Software upgrade screen is tricky, the timing needs ti be just right for the screen to stay, else it blinks and the OMAPP difficulty starts.
You need to listed to the connect disconnect sounds carefully.
Its not difficult, just that the timing needs to be right for the battery to be inserted.
all the best
schubeir
schubeir said:
HI,
Please uninstall all LG drivers, and start again. If you are using WIN7, run it with WINXP SP3 compatibility mode.
Getting the Software upgrade screen is tricky, the timing needs ti be just right for the screen to stay, else it blinks and the OMAPP difficulty starts.
You need to listed to the connect disconnect sounds carefully.
Its not difficult, just that the timing needs to be right for the battery to be inserted.
all the best
schubeir
Click to expand...
Click to collapse
ok so i unistalled all drivers etc done as said but im still doing something wrong.....
1.i have batt out connect phone wait few seconds for it to connect hear a sound connection keep held down till also hear another connection to say all connected etc.(the drivers have installed etc)
2.the screen is blank still battery is out
3.i have installed omap flash, lg flash tool and lg smart flash tool and fastboot and i can get any to work with phone
4.now there is no software update on screen even if i put battery back in phone just stay blank
so thats were i get to so lost.....
cheers in advance
And in FLASH TOOL TUTORIAL there is illustrations of a cable broken down etc do I have to do this to get into download mode and what acctual flash tool do I need to use because there is a few out but tried most but don't work with mine is it to dowith cable? And I have brought new cables etc just in case cheers in advance
Another stupid question but it shouldn't have anything to do with my phone having being rooted and not runngin LG software......I'm so confused with it all as I have tried everything and if it don't work phone can go to someone else lol cheers again
matt2098 said:
Another stupid question but it shouldn't have anything to do with my phone having being rooted and not runngin LG software......I'm so confused with it all as I have tried everything and if it don't work phone can go to someone else lol cheers again
Click to expand...
Click to collapse
Make sure all the drivers from the guide are installed. (including omap driver)
Load the DLL and the rom to lg flashtool.
Listen to the port with LG flashtool's port settings. (One is enough , The icon with a printer cable that's the port settings)
Take the battery out but be ready to plug it back in.
connect the usb cable.
Hold volume up
You're gonna hear sounds from windows in this order ;
1.Connected
2. Disconnected
3. Connected (Again , when you hear this plug the battery back in)
If you did it right then you're now in download mode.
Go to the device manager , find the LG device (I don't remember the name , but there is only one so you'll see it.) and go to properties , advanced and port settings.
Change the port to com41.
Flashtool should take over and start.
For extra guidance , see xbsall's thread ;
http://forum.xda-developers.com/showthread.php?t=1942836
To enter download mode .
Your phone in your hands without anything :-
1- Pull out battery .
2- hold vol+ and keep holding .
3- Connect your phone and you are still holding....
4- Now the phone is connected and you are holding vol+ . Insert battery and keep holding for about 3 seconds . Now the phone in download mode (there are some korean words on the screen) .
That's all
Good Luck
Sent From My P920 (ICS ported)
Hit Thanks Button If I Helped
ok i bloody given up going to use it as a bloody paper weight doing my head in.....no matter what i do i cannot get up software screen in download mode??? i do exactly as stated and still it doesn't want to do it every time blank screen phone will not power on.
with battery in screen blank went through listerning to conect disconnect connect etc do as descriped and now phone is connectected with blank screen as stated i know its connected installed everything.
cheers for the help
http://www.youtube.com/watch?v=zrkHry0gRZw this is excatly what im doing and nothing......
When you're online pm me when you can be online tomorrow.
Sent from my LG-P920 using xda app-developers app
Read the #3 post in this thread :-
http://forum.xda-developers.com/showthread.php?t=1942836
Maybe it will help .
Sent From My P920 (ICS ported)
Hit Thanks Button If I Helped
and works it
mayby this help
http://lg-usb-modem-driver.soft32.com/free-download?rel=center
good luck
ok so further update i can get it into fastboot which has a small lg symbol and says fastboot at the top but still no Korean writing software upgrade screen and in device manager i have lg cosmo come up now. It doesn't have LGE CDMA USB SERIAL PORT this up any more, ive insalled all new driver the lot everything prgressed a little further but stuck again lol cheers for the help so far
u want to flash ported ics im right?
Sent from my LG-P920 using xda app-developers app
OIKk finnally im on software download screen YAY!!!!!!!!!!! but flash tool keeps saying fail and at the top were is says model its say su660 not p920???? which i now have managed to sort so i press start and its says ready and nothing............hasnt done much phone pwers off then back to the begin again cheers again
Because you're flashing the baseband before you flash the ROM. Change the sequence , ROM first then baseband. (Just remove the baseband you added on the flash tool ".fls file" then add it again it's gonna be flashed after the ROM )
Edit : I can help via team viewer if you want.
Sent from my LG-P920 using xda app-developers app
if u read this u should know that u neednt fastboot to flash this ported ics and have to flash bin file first then fls file
and at the thread of first ported ics from xbsa tell u everthing what u use to know to flash this rom
http://forum.xda-developers.com/showthread.php?p=17177547
2nd post is in english
Sent from my LG-P920 using xda app-developers app
its all son confusing as there is so many different guides tutorals etc the only way i can get in software mode is by fast boot i can progress further to here but now im stuck tottaly lol its gets to 27% and stops because of a omap fail???
and all the time ive only been tryig to insatll the rom bin file as of present....not the fls so im now up to here and dont have clue with team viewer lol
Look at your pm
Sent from my LG-P920 using xda app-developers app
Hello everyone I have a few questions. First to say that I'm not new to android yet I don't think I'm very advanced. Anyway here is my situation: I have brand new chinese phone Cubot x6 which is with MT6592 chipset(or CPU I'm not sure). I rooted the device with Framaroot and everything was OK. Then I found CWM for the device on needrom(dot)com and when I flashed the recovery with "Flashify" it rebooteed but it is now stuck on the kernel logo. I can enter only in recovery which is still the stock one . I can't do anything except entering into the stock recovery. I have the stock ROM but it is NOT in a flashable .zip but in a folder which is used by some flashtool program (not the one for Sony but rather for MT devices) I have the stock boot.img, recovery.img and system.img. When I try to "apply update from sideload" and sideload either the boot or recovery images I get "installation aborted". If you guys can tell me how to enter fastboot mode and from there to flash system.img OR any other way to fix the phone please tell me.
P.S. The hardware buttons are only volume rockers and power button. I also tried to install MUIU but it can't flash it with stock recovery.
Please help me. I would be able to manage it somehow if I'm able to use adb, but I can't within the stock recovery.
hello dont problem use sp flashtool and flash rom stock
http://www.needrom.com/mobile/cubot-x6/
ROM
http://www.needrom.com/wp-content/uploads/2014/05/G807_C1_D1_CUBOT_V0.9.rar
SP FLASH TOOL
http://www.needrom.com/wp-content/uploads/2014/01/SP_Flash_Tool_v5.1348.00.zip
Description
ROM Mobile Cubot X6 – ROM Android 4.2.2
ONLY MT6592
Official ROM Cubot X6 Version: G807_C1_D1_CUBOT_V0.9
Gapps include – No Rooted
Language support: Multilang
Install ROM:
- Unpack FlashTools, and Click on Flash_tool.exe
- Select a the MT6592_Android_scatter_emmc.txt in ROM
- Wait file to be added into Flash Tool
- choose Option->USB Model,click USB Model
–> Choose Option->DA DownLoad All->Speed->High Speed, click High Speed
- Turn off your phone, remove the battery.
- "Press F9 (hit Download button)" OR " if upgrade ROM Firmware->Upgrade "
- and connect your phone into the computer via USB data cable.
- The process will start and a red progress bar will appear after color purple, yellow.
- And green circles display
- Finish !
- You can now safely disconnect your phone and turn it on.
Would it be possible for you to upload it to a different site? it seems that the download just cuts off all the time. I tried about 5 times after 10 mins it just stops. I bricked my phone the first day cuz i didnt know it wasnt compatible with Xposed installer
ZALACAYN2 said:
hello dont problem use sp flashtool and flash rom stock
http://www.needrom.com/mobile/cubot-x6/
ROM
http://www.needrom.com/wp-content/uploads/2014/05/G807_C1_D1_CUBOT_V0.9.rar
SP FLASH TOOL
http://www.needrom.com/wp-content/uploads/2014/01/SP_Flash_Tool_v5.1348.00.zip
Description
ROM Mobile Cubot X6 – ROM Android 4.2.2
ONLY MT6592
Official ROM Cubot X6 Version: G807_C1_D1_CUBOT_V0.9
Gapps include – No Rooted
Language support: Multilang
Install ROM:
- Unpack FlashTools, and Click on Flash_tool.exe
- Select a the MT6592_Android_scatter_emmc.txt in ROM
- Wait file to be added into Flash Tool
- choose Option->USB Model,click USB Model
–> Choose Option->DA DownLoad All->Speed->High Speed, click High Speed
- Turn off your phone, remove the battery.
- "Press F9 (hit Download button)" OR " if upgrade ROM Firmware->Upgrade "
- and connect your phone into the computer via USB data cable.
- The process will start and a red progress bar will appear after color purple, yellow.
- And green circles display
- Finish !
- You can now safely disconnect your phone and turn it on.
Click to expand...
Click to collapse
http://pan.baidu.com/s/1jGn3mvk
Enviado desde mi CUBOT X6 mediante Tapatalk
Thank you very much
ZALACAYN2 said:
http://pan.baidu.com/s/1jGn3mvk
Enviado desde mi CUBOT X6 mediante Tapatalk
Click to expand...
Click to collapse
I know this is an old thread, but please understand that I'm following this and I need help as I have the same phone and I haven't found any other updated threads on this topic.
ZALACAYN2 said:
Install ROM:
- Unpack FlashTools, and Click on Flash_tool.exe
- Select a the MT6592_Android_scatter_emmc.txt in ROM
- Wait file to be added into Flash Tool
- choose Option->USB Model,click USB Model
–> Choose Option->DA DownLoad All->Speed->High Speed, click High Speed
- Turn off your phone, remove the battery.
- "Press F9 (hit Download button)" OR " if upgrade ROM Firmware->Upgrade "
- and connect your phone into the computer via USB data cable.
- The process will start and a red progress bar will appear after color purple, yellow.
- And green circles display
- Finish !
- You can now safely disconnect your phone and turn it on.
Click to expand...
Click to collapse
I'm following this, as I tried to do this before, I was apparently doing something wrong and I couldn't get to the part where the program would actually flash it and it never showed progress bars or even detected the phone, now finally my phone is recognized by the program and it's now stuck on the red progress bar, when I put my mouse over it says "Download DA Now..." ?? what is it?
Should I do something, I don't wanna stop it with fear it may brick completely...
7 mins has passed, do I leave it there? I just saw the red progress bar going up to 100% and stay there... Nothing more, purple, or yellow :crying:
Does it usually takes that much? Another thing is that I don't see the device (usb) showing up in the Device Manager... is something going on? the sp flash tool might have become stuck on it doing nothing, but like I said, I dont wanna stop it with fear it might be actually doing something, and then I break it :S
@0xNOP nop,it doesnt take that long
0xNOP said:
I know this is an old thread, but please understand that I'm following this and I need help as I have the same phone and I haven't found any other updated threads on this topic.
I'm following this, as I tried to do this before, I was apparently doing something wrong and I couldn't get to the part where the program would actually flash it and it never showed progress bars or even detected the phone, now finally my phone is recognized by the program and it's now stuck on the red progress bar, when I put my mouse over it says "Download DA Now..." ?? what is it?
Should I do something, I don't wanna stop it with fear it may brick completely...
7 mins has passed, do I leave it there? I just saw the red progress bar going up to 100% and stay there... Nothing more, purple, or yellow :crying:
Does it usually takes that much? Another thing is that I don't see the device (usb) showing up in the Device Manager... is something going on? the sp flash tool might have become stuck on it doing nothing, but like I said, I dont wanna stop it with fear it might be actually doing something, and then I break it :S
Click to expand...
Click to collapse
sorry but my english is very poor , in the past , i make this tutorial , is in my spanish language but i have pics ,
http://www.htcmania.com/showthread.php?t=833168
[email protected] said:
@0xNOP nop,it doesnt take that long
Click to expand...
Click to collapse
Alright, thanks for letting me know, i know what is causing to behave like that, the thing is that the usb is abruptly getting disconnected, so when it gets detected it starts working like a charm and it starts detecting the phone in the sp flash tool, etc etc but when its about to start really doing anything like flashing or anything concrete the usb simply disconnects and I dont even see it anymore in the Device Manager list... And it appears as "Mt65xx Loader" in the Device Manager, for just few seconds before terminating... Might be that Im using the wrong drivers or The wrong cable ??? Or both??? I'm using an usb cable that was made for an HTC and it had assigned the drivers of my HTC phone... But at the same time, it uses that Mt65xx Loader driver thing that I installed as well...
ZALACAYN2 said:
sorry but my english is very poor , in the past , i make this tutorial , is in my spanish language but i have pics ,
<Link>
Click to expand...
Click to collapse
Hello, my first language is spanish also, so I understood the tutorial, however, you can refer to the reply that i sent to Qwerty, above, since the problem I think is on either the drivers im using or the cable itself....
Hmmmm so your problem is your connection disconnects after flashing starts .I helped a guy who had a similliar problem (his USB disconnected after 3 seconds so the tool doesn't flash ) I'll look it up again .
In the meantime I would like to know the condition of your phone like how you bricked it ,does the phone show any sign of life etc...
[email protected] said:
Hmmmm so your problem is your connection disconnects after flashing starts .I helped a guy who had a similliar problem (his USB disconnected after 3 seconds so the tool doesn't flash ) I'll look it up again .
In the meantime I would like to know the condition of your phone like how you bricked it ,does the phone show any sign of life etc...
Click to expand...
Click to collapse
Yup, Oh Lord, ty, I will really appreciate if you can give me a hand on this one and you're working on it alrdy so I'm really grateful :silly: :good:
Alright, conditions, it does shows signs of life, however, I can get past the boot logo, to the "main screen" where launcher is etc, etc... But the thing is that, since I was working on a rootkit, I disabled many of the processes that I saw were 'suspicious' by suspicious I mean (e.g.) "com.gogle.services" with version: "1.4" instead showing something like process: "com.google.services" with version (e.g.) "version: 4.4.22.493 build: 493823-22-1114" you see.
So I started deleting those processes and installed ES File Manager, which it has a built-in cleaner, so after I finished disabling those processes, I started deleting junk files like a mad man using ES File Manager, and I remember going to the root and deleting the majority of the folders and files that I saw, so probably that's whats happening
Now with that previous story told... Now when I get past the boot logo, I just get this plain black screen, with only the battery status showing up, like literally only that, and the top scrollable menu, I'm able to carry it down but it has no notifications whatsoever, when I plug in the USB (while the phone is on) I get nothing whatsoever from the phone to the computer...
Hope this info helps in debugging whats going on here
Reference: https://youtu.be/jfgDs9eSq0g
Try these and let me know if any of these works
1)try uninstalling the drivers. Then reinstall ,reboot PC and try to flash again
2) does your phone has meta mode? Some mt65xx phone have it. To try accessing it do the following
Load the scatter like usual in sp flash tool ,click download ,now power off your phone(with battery) and connect to pc but hold vol+ button as well .(sometimes you need to hold the vol+ button throughout the whole flashing)
As far as your story goes the final solution is either1) flashing your stock ROM or 2)flash a custom recovery and install a custom rom but both of these require the sp flash tool process to work.
Edit : you know I'm telling you this because I believe you tried factory reset already ,if you havnt try it first.
Sp flash tool is for unbricking mostly.
[email protected] said:
Try these and let me know if any of these works
1)try uninstalling the drivers. Then reinstall ,reboot PC and try to flash again
2) does your phone has meta mode? Some mt65xx phone have it. To try accessing it do the following
Load the scatter like usual in sp flash tool ,click download ,now power off your phone(with battery) and connect to pc but hold vol+ button as well .(sometimes you need to hold the vol+ button throughout the whole flashing)
As far as your story goes the final solution is either1) flashing your stock ROM or 2)flash a custom recovery and install a custom rom but both of these require the sp flash tool process to work.
Click to expand...
Click to collapse
Alright, thanks for the suggestions, I will try to do all of them and get back with results, hopefully with a fixed phone :S :S :S :good:
Just so you know ,I edited my previous post
[email protected] said:
Just so you know ,I edited my previous post
Click to expand...
Click to collapse
Thank you for everything!
Finally got it to work! everything was working good, except the phone itself since it was semi-bricked apparently it couldn't make it to activate the usb system itself... however I went to SP Flash Tool and instead using only "Download" option, I instead used "Format All + Download" ... And then the USB didn't disconnected anymore and then I saw the tool working on it and the progress bars running perfectly! it took like less than 50 seconds to do everything when I saw the big green check mark on my screen!!!!!!!!!!!!!!! AMAZING!! Thanks!
0xNOP said:
Thank you for everything!
Finally got it to work! everything was working good, except the phone itself since it was semi-bricked apparently it couldn't make it to activate the usb system itself... however I went to SP Flash Tool and instead using only "Download" option, I instead used "Format All + Download" ... And then the USB didn't disconnected anymore and then I saw the tool working on it and the progress bars running perfectly! it took like less than 50 seconds to do everything when I saw the big green check mark on my screen!!!!!!!!!!!!!!! AMAZING!! Thanks!
Click to expand...
Click to collapse
Glad it worked for you ,good luck
BTW if you like avoiding the default bloatwares you might wanna try a custom ROM like cyanogen .look up development for your phone in xda or 4pda
Hi, please I need your help. I tried to flash stock ROM but I hard bricked my phone. When I connect phone with computer I'm holding volume up button. In device manager it shows "MediaTek USB Port (COM4)" but after three seconds it disconnect. This is why I can't flash ROM. It's everytime disconnect after three seconds.. Please help me.
Maybe you can try to follow this step :http://www.engineerthink.com/blog/2015/11/how-to-unbrick-hard-bricked-android-phone/
If didnt work,maybe there is a problem in your hardware,try to service your phone to service center.
It didn't work.. Is there a way how to solve hardware problem?
Or trt another ways in this website
http://androidflagship.com/3217-fix-damaged-bricked-android-device
My note 10.1 N8000 have the same problem,i try to fix it,but its hard,so i send my phone to service person,they fix the hardware..
How much did you pay?
Growicek said:
Hi, please I need your help. I tried to flash stock ROM but I hard bricked my phone. When I connect phone with computer I'm holding volume up button. In device manager it shows "MediaTek USB Port (COM4)" but after three seconds it disconnect. This is why I can't flash ROM. It's everytime disconnect after three seconds.. Please help me.
Click to expand...
Click to collapse
What tool are you using to flash the stock firmware .and it will be helpful if you say how exactly you bricked it
I'm using SP Flash Tool for flashing.. I tried to flash stock ROM into my Lenovo A536, when it was done I unplugged phone from computer and tried to power on but there was a problem.. Phone was hard bricked
Growicek said:
I'm using SP Flash Tool for flashing.. I tried to flash stock ROM into my Lenovo A536, when it was done I unplugged phone from computer and tried to power on but there was a problem.. Phone was hard bricked
Click to expand...
Click to collapse
So your saying the flashtool bricked your phone ?
Where did you get the firmware for your phone cuz flash tool can only brick your device if you used firmware not for your phone. Also does your phone shows any sign of life ie vibrate turn on for a sec, bootloop etc...
I don't remember where did I find it.. There is only one sign of phone life. When I connect it with computer, phone connect but only for a while, after a three seconds disconnect.
Growicek said:
I don't remember where did I find it.. There is only one sign of phone life. When I connect it with computer, phone connect but only for a while, after a three seconds disconnect.
Click to expand...
Click to collapse
I know two guys who had this problems.
1) guy took it to service ,they fixed it.
2) installed phone drivers again and tried again and it worked.
If you're confident you have the right firmware load scatter click download and connect your powered off phone without pressing any buttons ,and see if it works.
Anyway I'm narrowing down the cause of the problem to either an incorrect firmware or a sp flash tool version (some version are ****)
Didn't work
Growicek said:
Didn't work
Click to expand...
Click to collapse
Pull out the battery then leave it for 10 min reinsert and see if it boots (give it some time ) .if it doesn't
Or connect your phone to PC(without battery) ,load scatter click download on sp flash tool ,then put in the battery .
First method - didn't work
Second method - device automatically disconnect after three seconds, so SP flash tool says error
Growicek said:
First method - didn't work
Second method - device automatically disconnect after three seconds, so SP flash tool says error
Click to expand...
Click to collapse
What error code?
I bricked my device same as you so I could help you further but my device connected in meta mode and flashed its firmware fine ,so try another USB cord
Ps I've pretty much mentioned all I know about unbricking in this thread so I can't be of further help.https://www.google.co.in/url?sa=t&s...ggeMAA&usg=AFQjCNGkwgZbNQCJFWtm90DM-Mksnzk0dA look this up specifically #9
It didn't work.. Error is: BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032)
Wow! I did something and then uninstalled driver. When I connected phone, driver automatically installed and now it's not disconnecting, but still can't flash it
Growicek said:
Wow! I did something and then uninstalled driver. When I connected phone, driver automatically installed and now it's not disconnecting, but still can't flash it
Click to expand...
Click to collapse
That's great ,what's the problem now ? Still brom error or download stuck st 0% or any other?
Still same brom error
Growicek said:
Still same brom error
Click to expand...
Click to collapse
Brom error is mostly related to see improper firmware which also explains why you're phone got bricked in the first place .
Try downloading another stock firmware
Man? I love you!!! I tried about four ROMs and the fourth is working!! .. There was a one more problem with flashing again with drivers, idk why but they dissapear, so I installed them again and then tried flash ROM.. Thank you very much! You saved my money!