[Q] XOOM 2 stucked at booting. - Xoom Q&A, Help & Troubleshooting

Hi guys,
I need your help. I have a XOOM 2 (MZ616 32 3G) with stock ICS. I rooted it to use Titanium Backup and unistalled 2 preinstalled apps which I will never need (Die Welt and Bild - was bought in Wien). Now after I restarted from Titanium Backup menu it does not boot, and remains stuck in "flashing red M" phase. I tried power + low volume for 15 sec and it just retstarts the tablet and then it remains in the same phase. I cannot stop it, just look at the red M. I managed to enter in Recovery and wipe data / cash and factory reset and it does not help.
What can I do? Thanks a lot.

Can someone help me uploading a MZ616 Retail Firmware? There is a different one for the 32GB and 16GB? I cannot find one.
USB debugging is disabled, and since I cannot pass the boot screen I cannot enable it. Do I have a chance to write a stock rom on it?

What a terrible thing it seems caused by the Ti
Sent from my MZ617 using xda app-developers app

Related

[Q] Droid 2 Recovery

Today I tried to install Gingerbread 2.3 to my Milestone 2 (Droid 2) and the attempt was a severe failure. Tried Hard Reset. Unable to do it. ´
Can anyone say me how to recover from Rom Manager (But unfortunately not able to get my mobile started)
When ever I try to hard reset all I see is fickering of Moto logo just once on the screen and thats it. then the screen remains blank after that.
However, finally pressed the home+camera+volume down+power
and its showing
Bootloader 70.12
Battery OK
OK to Program
Transfer Mode: USB
Have no idea what it means or wat to do. Totally new to rooted phone applications.
Could you plzzz help me out.
Any tips?
I am really frozen. Just a couple of weeks old.
I googled a lot of options. Everything was a failure.
Desperately searching for help!

[Q] Samsung Galaxy S2 Skyrocket - Bootloop

Hi,
So my SGS2 Skyrocket is stuck in a boot loop. I've have the Sky Icecream Sandwich ROM installed for a few months now, and haven't changed anything recently.
What is happening is my phone with vibrate every 2-3 seconds with a blank screen. When I take out the battery/power source, and put it back in, the phone shows the Samsung splash (not the Android splash) for a few seconds, then goes blank and does the vibrating again.
I've tried plugging it into the computer, but the power it gets from USB turns it on and into the boot loop, so I can't get it into any kind of recovery mode. I also tried the Vol+Home+Power key combo, with nothing.
Any idea what could cause this/what the course of action should be? Thanks!
Turn phone on and wait 2 hours. If it wont work do what you use to do when you booting recovery mode. (home screen i guess). But hold it longer.
Good luck
nathan-96, do you have any idea what caused this? Because what's concerning me is that it's not getting past the Samsung icon (before android starts actually booting).
When you say turn it on, do you mean just put in the battery? Because the loop starts right when I put the battery in, it doesn't wait for me to press anything.
No, I meant turning it on. Hold centre button and put battery in. Just hold it for a moment. Hopefully you will reach recovery.
Sent from my GT-S5660 using xda premium
Can you access download mode instead of recovery? If so you could try re flashing something with Odin...
Definitely try getting the battery out for a few minutes and boot the phone while maintaining the combination to enter recovery
Sent from my GT-I9100 using xda premium
boot loop samsung galaxy s2 skyrocket
nathan-96 said:
Turn phone on and wait 2 hours. If it wont work do what you use to do when you booting recovery mode. (home screen i guess). But hold it longer.
Good luck
Click to expand...
Click to collapse
so i have a question, im having the same problem (obviously) but my cwm wont work and says something about md5 check sum and verfication? i dont know what the problem is but if the 2 hour thing doesnt work i at least need cmw to work so i can then at least install my custom rom to have my phone working. can you help? thanks
Possible a bad download...
You have CWM on your phone? Have you visited the forum for your device?
http://forum.xda-developers.com/forumdisplay.php?f=1399
technologic337 said:
so i have a question, im having the same problem (obviously) but my cwm wont work and says something about md5 check sum and verfication? i dont know what the problem is but if the 2 hour thing doesnt work i at least need cmw to work so i can then at least install my custom rom to have my phone working. can you help? thanks
Click to expand...
Click to collapse
AT&T Skyrocket BOOT LOOP Cyanongenmod 10
Hi ,
I´am playing with my Skyrocket to run the Cyanogenmod 10 and always I got stuck at Boot Loop .
This is what I have and did :
- Running AT&T Stock ICS 4.0.4 UCFL6 rooted ( I have a back up of this)
- CWM 6.0.1
- Cyanogenmod 10 Nightly Dec 07 , but I also tried with Cyanogenmod 10 Stable
- Gapps
- Factory Reset / wipe cache
- Wipe dalvik
- Mount/storage format system
- install using CWM Cyanogenmod
- install using CWM gapps
- Mount/ storage format cache
- reboot
I also tried to wipe twice as other threads say.
So I´am still with the boot loop
I returned my backup to the ICS ...
Thanks in advance !!!
Skyrocket Bootloop
Whats happening is the power button acts as if its being pressed. Thats why you have the bootloop and the phone turns on as soon as you put the battery in.
Try repeating pressing the power button or hold the power button without the battery for a few seconds. :fingers-crossed:

[Q] Blue Screen of Death on Boot Huawei Y300

Hi guys, I searched on the net nearly everywere but I wasn't able to find a solution about it.
I own a rooted huawei Y300, with CeXstel v.62 kernel and a FusionX ROM.
All was working, then I followed the guide about Swapping that I found in this forum. Not having a card reader, I did the partition with the recovery (TWMP).
All seemed to work, then I installed the app Swapper2, following the guide.
After doing so, I tried to restore the data on my phone (namely, my apps) using Titanium Backup.
It got stucked at some time, so i restarted it.
After the Huawei Ascend Screen, the phone got stucked on a totally blue screen.
I tried to go to the recovery, but I was unable to do so.
I tried even to plug the shutted down phone to the charger, but, again, it got stucked on a blue screen, without showing the battery getting charged.
What am I supposed to do?
Hello
Using ADB fast boot try to get back to your stock rom,kernel .
Hope it works

[Q] Soft-bricked tablet.

Hi there guys! im new here.
I have bricked my android tablet phone which is Mercury running on android 4.2.2 , model number T70611, MTK---8312 . When I turn it on, It will just stuck on logo screen, I've already tried resetting (using power on + volume up) but it will just stuck on the fastboot screen too.
I rooted it using Ministro ll, superSU and poot rooting tools, it was successfully rooted but I wasnt satisfied so I want to start all over again and root so I decided to restore factory reset. I have manually restored other apps using titanium back up. During the restore, it hung so I rebooted it and continue restoring the files, on the second time it hung again so I rebooted it again but this time, It was stuck on booting until now. If i plug the charger it works fine. Can anybody tell me if there is any chance to unbrick my tablet phone ?
Any reply would be great.

[Completed] [Q] Bootloop right after root

Yesterday i rooted my LG G Pad 8.0 but right after that it started bootlooping.
I don't have cwm, it's just rooted (can't check it as i can't load android)
I have rooted a lot of android devices but this is the first time it happens to me (without cwm). When i try to hard reset using the
hard keys combination it starts, it shows the android logo for like 1.5 sec. and it just reboots.
It keeps rebooting when i power it off.
Hi, thank you for using XDA Assist.
What you need is a format and possibly a reinstall of your OS. This Thread has all you need.

Categories

Resources