Database Info

Problem with RCMix3D KINGDOM v2.0 Evolutionary Sense! THE ORIGINAL SENSE 3.0 DHD ROM

I recently installed this ROM and I thought it was working fine. I did a restart of the device and now I seem stuck at a android screen that it doesn't see to be going pass. The android word just display as a light goes across the screen and then it seems to cycle again.
I can't seem to boot into recovery either to put restore the back up I made, because when I get to the white fast boot screen the selection won't scroll down to recovery when I hit the down volume button. It just stays there and then tries to install a patch for a radio I believe.
Any thoughts on why this is stuck at the android word screen or how I can get back to my back up and restore that. Thanks

verseman said:
I recently installed this ROM and I thought it was working fine. I did a restart of the device and now I seem stuck at a android screen that it doesn't see to be going pass. The android word just display as a light goes across the screen and then it seems to cycle again.
I can't seem to boot into recovery either to put restore the back up I made, because when I get to the white fast boot screen the selection won't scroll down to recovery when I hit the down volume button. It just stays there and then tries to install a patch for a radio I believe.
Any thoughts on why this is stuck at the android word screen or how I can get back to my back up and restore that. Thanks
Click to expand...
Click to collapse
Try removing your sd card and then vol down and power. Then once you're past fastboot white page pop it back in in time for recovery, and do your thing. Try clearing caches first. If not then restore a backup.
Sent from my Inspire 4G using Tapatalk

Yup I think I seen that in another forum to a similar type problem, I removed the SD card and was able to get back into clockwork recovery. I wipes all data/settings, cache partition and then loaded the rom again.
First thing I did was do a reboot so. So far it didn't get stuck and booted back up. Will do another reboot later tonight to see if it holds. Thanks for the tip

I'd reccomenf going to the dhd forum and getting the latest version (new one coming out soon)
Sent from my Desire HD using XDA App

Fit won't boot?!

First of all *ITS NOT A CASE OF BRICK!*
hey guys Im in a problem , MY FIT IS NOT BOOTING! I was running CYANMOBILE rEvO A and suddenly my Fit turned off and when i tried turning it on, I got stuck on the ANDROID LOGO (SPLASH SCREEN) , I tried wiping data in recovery but phone just stuck on ''wiping data'' waited for 10 minutes but nothing happened the screen is FREEZED!
I tried flashing stock XXKPP FIRMWARE but the phone dosen't got flashed properly, it doesnt boot and i directly go to recovery with just holding POWER BUTTON, a message appears saying 'APPLYING MULTI CSC' any suggestion or help
would be appreciated!

Have u tried reverting back to a backup, bro?
Sent from my GT-S5670 using XDA Premium App

Any nandroid back up bro than try to put in memory card n try restore

neil.richard said:
First of all *ITS NOT A CASE OF BRICK!*
hey guys Im in a problem , MY FIT IS NOT BOOTING! I was running CYANMOBILE rEvO A and suddenly my Fit turned off and when i tried turning it on, I got stuck on the ANDROID LOGO (SPLASH SCREEN) , I tried wiping data in recovery but phone just stuck on ''wiping data'' waited for 10 minutes but nothing happened the screen is FREEZED!
I tried flashing stock XXKPP FIRMWARE but the phone dosen't got flashed properly, it doesnt boot and i directly go to recovery with just holding POWER BUTTON, a message appears saying 'APPLYING MULTI CSC' any suggestion or help
would be appreciated!
Click to expand...
Click to collapse
Try via ODIN install S5670XXKPI. It has 4 files. After, via ODIN install the firmware that you want.
Download here:
http://www.sammobile.com/firmware/

remove the sim & sd while flashing a stock via odin

Can't Boot Into Recovery.

I'm having an unusual problem for me I've not came across this before, I can get my tab 2 - 5110 to boot into download mode but not recovery mode, It will boot to the rom normally when I shut it down completely to the charge battery animation will it boot up normally. If I try restarting the tablet by holding in the power button then releasing it at the samsung logo it just goes to a blank black screen also kies nor odin recognises my tablet its a very unusuall problem for me and I've tried everything I know to try fix it but with no success so far, I was running phils touch recovery and brolees 3.0 themed rom, my tablet worked perfectly until I tried to install brolees 4.0 over the top of his previous one the 3.0 which I thought would have been straight forward, at first it wouldn't get past the samsung logo but I worked out if I can get it to shut down to the charge battery animation it will boot normally but it reloads the apps everytime, anyhoo if anyone has had a similar issue or knows what stupid mistake ive made I would really appreciate any help, thank you in advance!

I cannot get my gt2 10 to boot and keep recovery
Sent from my GT-P5113 using Tapatalk 4

[Q] Need help galaxy s2 i9100 boot loop and freezing

Hello I am searching for help. The problem is that my galaxy s2 i9100 stopped working properly. It started like this maybe I took out the battery or something I don't remember and then I turned it on the phone wouldn't boot. I thought maybe my android operation system got bricked so I decided to re flash it but as I can remember the phone wouldn't go in to download mode but some how I managed to reflash the firmware but then phone booted it just froze and then I pressed lock button the phone screen would go black and reboot. After installing cyanogen mode 11 the phone would boot and it could be used again until pressed the lock button it would go black and reboot so I have been reading forums and found problems like boot loop corrupted mmc or something else corrupted and I don't know what the real problem is because the symptoms are like boot loop or corrupted mmc or soft brick. I have already tried other kernels other android versions clock work mode

migimantas said:
Hello I am searching for help. The problem is that my galaxy s2 i9100 stopped working properly. It started like this maybe I took out the battery or something I don't remember and then I turned it on the phone wouldn't boot. I thought maybe my android operation system got bricked so I decided to re flash it but as I can remember the phone wouldn't go in to download mode but some how I managed to reflash the firmware but then phone booted it just froze and then I pressed lock button the phone screen would go black and reboot. After installing cyanogen mode 11 the phone would boot and it could be used again until pressed the lock button it would go black and reboot so I have been reading forums and found problems like boot loop corrupted mmc or something else corrupted and I don't know what the real problem is because the symptoms are like boot loop or corrupted mmc or soft brick. I have already tried other kernels other android versions clock work mode
Click to expand...
Click to collapse
I have found that my emmc has the insane chip bug. The phone boots normally with cyanogen mode 11 but then it goes to sleep mode or I press the power button the screen goes black and the phone restarts. I have tried siyah kernel to try dual boot but then I flash siyah I cant get into recovery.

I think you should flash latest STOCK ROM with Odin, and then follow available custom rom instructions on xda...
Test if the stock rom will work for you, boot your phone etc... Try to use it a few days. If everything is OK, proceed with
further procedures...

twinsen.net said:
I think you should flash latest STOCK ROM with Odin, and then follow available custom rom instructions on xda...
Test if the stock rom will work for you, boot your phone etc... Try to use it a few days. If everything is OK, proceed with
further procedures...
Click to expand...
Click to collapse
I have already tried this but with the stock rom phone boots but at the section where I have to chose language I jus freezes stops working

So I think it is a hardware problem. Phone on stock rom shouldn't freeze on language selection. Something is wrong. If you are on warranty, let them fix it for you, if you are not, try to fix it in some phone repair point. I'm sure you can stop your attempts. It will not be better for now.

twinsen.net said:
So I think it is a hardware problem. Phone on stock rom shouldn't freeze on language selection. Something is wrong. If you are on warranty, let them fix it for you, if you are not, try to fix it in some phone repair point. I'm sure you can stop your attempts. It will not be better for now.
Click to expand...
Click to collapse
Take it straight away to the official service centre

Problem with bricked GT-N8000

Hi everyone
I have GT-N8000 2012 version. A week ago it suddenly went off and I am no longer able to turn it on, i.e. after showing the Samsung white logo, it is restarted. I have tried flashing different firmware versions but it doesn't help. Also the Power+VolumUp combination does not show any menu (I think it usually boots a menu for factory reset). What can I do? (I prefer being able to recover my data).
Thanks in advance

Same problem here, on same device type (N8000 2012, standard stock samsung firmware).
Mine doens't even reach the Samsung logo. It just gets to the 1st screen (Galaxy Note 10.1 white message) and reboots after a couple of seconds.
Also can get to any menu using Power & VolumeUp (doesn't seen to have any effect). Only Power &VolumDown gets to the Download menu.
Unless this is a Hardware problem I wanted to factory reset the device, hopping this would clean "everything" but put it running again.
Thanks

Suggest flash stock rom via Odin ,and download mode.

try this one
jchicau said:
Same problem here, on same device type (N8000 2012, standard stock samsung firmware).
Mine doens't even reach the Samsung logo. It just gets to the 1st screen (Galaxy Note 10.1 white message) and reboots after a couple of seconds.
Also can get to any menu using Power & VolumeUp (doesn't seen to have any effect). Only Power &VolumDown gets to the Download menu.
Unless this is a Hardware problem I wanted to factory reset the device, hopping this would clean "everything" but put it running again.
Thanks
Click to expand...
Click to collapse
no worries. it happens. soft brick situation
you need a stock rom for your device or back up rom.
go back to PC and start ODIN, cable in, then boot your device under download mode not recovery.
once it is in download mode, flash your device using ODIN.
allow to reboot.
un-bricked device.:good:
stock ROMs are here in case you are looking
https://www.sammobile.com/firmwares/
https://www.stockrom.net/samsung
let me know how it goes.