Yesterday the phone was working fine
but today it does not turn on :crying::crying:
help please
provide some more info about ur problem. which rom u were using? have u done anything with ur phone? have u tried charging it?
xlm13x said:
provide some more info about ur problem. which rom u were using? have u done anything with ur phone? have u tried charging it?
Click to expand...
Click to collapse
I was using PAC 18
I just plugged in the charger like usually I do and the went to sleep
but when i got up and cheked the phone
it didn't turn on
try connecting ur phone with pc and check if its being detected by ur pc or not.
if not seems like u have bricked ur device. (dont worry, this happened many times with me and our device is very easy to unbrick).
xlm13x said:
try connecting ur phone with pc and check if its being detected by ur pc or not.
if not seems like u have bricked ur device. (dont worry, this happened many times with me and our device is very easy to unbrick).
Click to expand...
Click to collapse
nothing happens when I connect to pc
Do you have an usb jig? If yes, connect it and see if it turns on. As for connecting to pc, see if phone is detected by odin.
If possible, Try another battery.
Sent from my GT-I9103 using Tapatalk 2
emanoj.i9103 said:
Do you have an usb jig? If yes, connect it and see if it turns on. As for connecting to pc, see if phone is detected by odin.
If possible, Try another battery.
Sent from my GT-I9103 using Tapatalk 2
Click to expand...
Click to collapse
it doesnt even show samsung logo that appears before bootanmanion
Try connecting phone with PC in APX mode and if its being connected then you can perform unbricking process. (For how to do it? and more info. Refer tut in my sig).
Sent from my Galaxy Royale using Tapatalk 2.
nothing happens when I press VOLUME UP, HOME, POWER KEY together
Mr_ArO said:
nothing happens when I press VOLUME UP, HOME, POWER KEY together
Click to expand...
Click to collapse
Have u tried to remove battery for 5 min and inserted it back?? Then check if it boots??
Sent from my GT-I9103 using Tapatalk 2
kataria.vikesh said:
Have u tried to remove battery for 5 min and inserted it back?? Then check if it boots??
Sent from my GT-I9103 using Tapatalk 2
Click to expand...
Click to collapse
I will try that now
This happened to my galaxy r too. I sent it in and they changed the motherboard.
Sent from my GT-I9103 using xda app-developers app
Mr_ArO said:
I will try that now
Click to expand...
Click to collapse
nope
still bricked
Is ur charger loose at bottom by the usb plug?
Sent from my SAMSUNG-SGH-I317 using xda premium
twanskys204 said:
Is ur charger loose at bottom by the usb plug?
Sent from my SAMSUNG-SGH-I317 using xda premium
Click to expand...
Click to collapse
nope it plugs in there like it should
I tryed to connect to pc, jig and another charger still nothing happens
just follow this tutorial, u will be able to boot up ur phone again.
http://forum.xda-developers.com/showthread.php?t=1706572
btw is ur phone is in under warranty or its over?
xlm13x said:
just follow this tutorial, u will be able to boot up ur phone again.
http://forum.xda-developers.com/showthread.php?t=1706572
btw is ur phone is in under warranty or its over?
Click to expand...
Click to collapse
warranty ends in may
but i flashed PAC rom
Mr_ArO said:
warranty ends in may
but i flashed PAC rom
Click to expand...
Click to collapse
its great, now u can do unbricking process or can give to SSC, they will fix it for free
Don't worry buddy.. Ssc will change motherboard for you.. I had this issue too.. Phone unexpectedly turned off and just refused to turn on.. Since its in warranty you'll not have to pay anything..
From my CM10 powered galaxy R
Related
Hi guys,
i have Galaxy Tab 2 hard bricked. Can't turn it, nothing happens when trying to turn on or charge. Absolutely dead. It is dead after i've tried to enable swap on rooted device.
Please help me
Wat was ur last ROM stock or else?
Did u tried it to connect in download mode to PC?
Sent from my GT-P3100 using xda premium
Please be more brief.
What did you do?
What did you try?
When plugged in to a computer, does it recognize it?
Does ODIN recognize it?
And if all fails and you are ready to go hardmode:
https://www.youtube.com/watch?v=Ami4TQH3cmc
jyeshta001 said:
Wat was ur last ROM stock or else?
Did u tried it to connect in download mode to PC?
Sent from my GT-P3100 using xda premium
Click to expand...
Click to collapse
It was stock ROM. I've installed only cwm-root-gtab2a and GT-P5100_ClockworkMod-Recover - this files. And all was fine.
I can't turn it to download mode.
When i tried to connect to PC i hear sound like device attached and from 3-5sec I hear 'device unattached' sound. This device is 'TI board'
suka_narkot said:
It was stock ROM. I've installed only cwm-root-gtab2a and GT-P5100_ClockworkMod-Recover - this files. And all was fine.
I can't turn it to download mode.
When i tried to connect to PC i hear sound like device attached and from 3-5sec I hear 'device unattached' sound. This device is 'TI board'
Click to expand...
Click to collapse
Hay bro..... will u tell me wants ur model....?
I wanna help u coz I know wats da pain of bricking a android.....
Sent from my GT-P3100 using xda premium
My Galaxy Tab 2 is P5100. It is rooted and works fine until i've tried to tweak swap via Swapper 2.
After i've installed this app i've tried to tweak my device and reboot it. so my tab is turned off and i can't enable it.
I've installed drivers and saw 'omap 4430' device in Windows. It appears when i connect my tab via usb cable at hold power button.
Now u connect it to Odin ....did the Odin software recogniz or tab
If yess u can reflash the all things....
Sent from my GT-P3100 using xda premium
jyeshta001 said:
Now u connect it to Odin ....did the Odin software recogniz or tab
If yess u can reflash the all things....
Sent from my GT-P3100 using xda premium
Click to expand...
Click to collapse
It can't be turned on in recovery/download mode so it is not visible in ODIN.
suka_narkot said:
My Galaxy Tab 2 is P5100.
I've installed drivers and saw 'omap 4430' device in Windows. It appears when i connect my tab via usb cable at hold power button.
Click to expand...
Click to collapse
????
Sent from my GT-P3100 using xda premium
what happens when you put it on charge ? probably battery is zero
Hello, I had same symptoms with my p5100 and I can't repair it. look here http://forum.xda-developers.com/showthread.php?t=1908949
jyeshta001 said:
????
Sent from my GT-P3100 using xda premium
Click to expand...
Click to collapse
Tab should be turned on in download mode for flash via ODIN. But I can't enable it in download mode.
What happens when i connect Table to PC - I can see 'OMAP 4430 USB device' in Windows device manager. But this device is not visible and not accessible with ODIN. Nothing happens with my tablet - display is blanc, no backlight, ... :crying:
rraaka said:
what happens when you put it on charge ? probably battery is zero
Click to expand...
Click to collapse
No, battery was full-charged.
And i've plugged to charger and hold it with connected charger for 5 hours tonight - nothing, it is dead
riff box is the only way
http://www.fonefunshop.co.uk/Unlocking/riff_box.htm
morteza.ghodsi said:
http://www.fonefunshop.co.uk/Unlocking/riff_box.htm
Click to expand...
Click to collapse
I don't see that it supports the ti omap4430.
Sent from my GT-P3113 using xda app-developers app
morteza.ghodsi said:
http://www.fonefunshop.co.uk/Unlocking/riff_box.htm
Click to expand...
Click to collapse
I've visited one month ago much service centers (which used riff, medusa box, etc... ) - nobody can repair my bricked p5100 (((
merka_zh said:
I've visited one month ago much service centers (which used riff, medusa box, etc... ) - nobody can repair my bricked p5100 (((
Click to expand...
Click to collapse
Did u have any idea if you are going to repair it by Samsung how much it will cost....?
suka_narkot said:
Tab should be turned on in download mode for flash via ODIN. But I can't enable it in download mode.
What happens when i connect Table to PC - I can see 'OMAP 4430 USB device' in Windows device manager. But this device is not visible and not accessible with ODIN. Nothing happens with my tablet - display is blanc, no backlight, ... :crying:
Click to expand...
Click to collapse
Unfortunately I'm sorry to say but when to get that omap message the tablet or phone IS in fact hard bricked and is not recoverable by anything here at xda. Samsung may be able to fix it but you are probably Better off just getting a new tab man because it'll cost just as much.
I know it's hard to hear that and it really sucks.
I almost bricked this tablet too and just had to give up on it for a while because it was so frustrating. I finally found the fix.
A couple months ago these guys were posting the wrong recoveries and root files and not labeling them correctly. So you have to be real careful with this stuff because s alot of them don't know what's going on.
Sent from my SGH-T889 using Tapatalk 2
adishakthi said:
Did u have any idea if you are going to repair it by Samsung how much it will cost....?
Click to expand...
Click to collapse
1. authorised Samsung center proposed me to change board for 350$
2. i have contacts with unofficial master and he proposed me to replace internal memory card - from broken Tablet for 150$
But I've been looking for another solution and when came to service for replace internal flash memory (2 weeks ago) - they didn't have it.
So I've put it on the shelf and bought another Tablet - it is not Samsung, it is repairable device )))
Plz delete.....
Hi all,
Please help... I tried to flash my SL I9003 and somehow the connection broke in between.
Now the mobile doesnt power on and when connected to the laptop, I just see the processor getting recognized and then disappears. within 2 seconds.
I tried with USB Jig but nothing happens.
Any ideas?
Please help. I dont want to loose this phone dead.
Does Odin recognize the phone? I mean, with Odin on, press volume down + power, connect it to the laptop and see if the phone goes into download mode so Odin could recognize it (COM status shown)
Hope this helps
Sent from my GT-I9003 using xda app-developers app
this should be in the general .
take out the battery. put back in and get into download mode if possible. if not, to the service center you should bring it..
Sent from my GT-I9003 using xda app-developers app
samsunggti9000 said:
I tried with USB Jig but nothing happens.
Any ideas?
Please help. I dont want to loose this phone dead.
Click to expand...
Click to collapse
your username 9000
you are sure that you are in the right section ?
If not you COME to burn your motherboard
The only solution, samsung service center with your operator
If longer supported you still have to flash the board with a Jtag repair tools Professional equipment
You shook minimum 60 € without success if really toasted your motherboard
Sincerely ...
Thank you all for ur suggestions.
@kralin, the phone doesnt get recognized using the odin. doesnt startup and no lights and no logo. I have installed the processor drivers in my windows 7 laptop and when connecting the phone, it recognizes the processor for 2 seconds and disconnects.
@imjustafq, this was the first step when I thought I bricked my phone but to no use.
@LoLaTiOn, dont worry about the username. I am in the right section.
I tried to check with Samsung center and they said they dont know what to do. not tied with any operator though..
You described the symptoms which very like hard brick like corrupted bootloader
Sent from my Galaxy Nexus using Tapatalk 2
chongns said:
You described the symptoms which very like hard brick like corrupted bootloader
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
Do we have any solutions for Hard Brick? I tried to use USB Jig but of no use.
samsunggti9000 said:
Do we have any solutions for Hard Brick? I tried to use USB Jig but of no use.
Click to expand...
Click to collapse
One and only solution is service center.
Sent from my GT-I9003 using Tapatalk 2
Forgot to disable LG modem
Currently stuck in emergency mode
Haven'tremoved battery
[RANT]
(Why the actual f*** did I do that)
[/RANT]
@Junior Einstein @xu3sno @ibub @shinobisoft @sweetnsour
akiratoriyama said:
Forgot to disable LG modem
Currently stuck in emergency mode
Haven't removed battery yet
@Junior Einstein @xu3sno @ibub @shinobisoft @sweetnsour
Click to expand...
Click to collapse
Can't you just disable the modem and start over?
shinobisoft said:
Can't you just disable the modem and start over?
Click to expand...
Click to collapse
Getting some type of error
Sent from my GT-I9082 using Tapatalk
akiratoriyama said:
Getting some type of error
Sent from my GT-I9082 using Tapatalk
Click to expand...
Click to collapse
The following thread is only a few posts long. Read them. Do exactly as the OP states and what is additionally stated in post #3.
Here's the thread. Only thing different you will do is use your KDZ file instead of the one mentioned. This setup just unbricked two P506's for me. They have been bricks for about 2 years. Only booted to Emergency Mode. Now both of them are fully functional again.
shinobisoft said:
The following thread is only a few posts long. Read them. Do exactly as the OP states and what is additionally stated in post #3.
Here's the thread. Only thing different you will do is use your KDZ file instead of the one mentioned. This setup just unbricked two P506's for me. They have been bricks for about 2 years. Only booted to Emergency Mode. Now both of them are fully functional again.
Click to expand...
Click to collapse
I shouldn't remove the battery right ?
Also laptop is no longer detecting my oone for some strange reason (Disabled LG modem #2 and then it asked for a restart which I did)
Sent from my GT-I9082 using Tapatalk
Refuses to boot now
Looks like I own a brick
Thanks Optimus One community
It was a wonderful time :crying:
Farewell
akiratoriyama said:
Thanks Optimus One community
It was a wonderful time :crying:
Farewell
Click to expand...
Click to collapse
@akiratoriyama
Hey, not so fast, man
Did you try this:
http://androidforums.com/optimus-one-tips-tricks/410080-how-unbrick-your-lg-p500-optimus-one.html
And I think our p500 community with such experience and expertise to unbrick the phone will help you :good:
xu3sno said:
@akiratoriyama
Hey, not so fast, man
Did you try this:
http://androidforums.com/optimus-one-tips-tricks/410080-how-unbrick-your-lg-p500-optimus-one.html
And I think our p500 community with such experience and expertise to unbrick the phone will help you :good:
Click to expand...
Click to collapse
Doesn't even boot
akiratoriyama said:
Refuses to boot now
Looks like I own a brick
Click to expand...
Click to collapse
no sign of any animation? LG logo for a split second? remove battery and connect charger directly if it shows any sign at all. i think the mobile still can be recovered using JTAG. many had fixed their mobiles using jtags.
sam811 said:
no sign of any animation? LG logo for a split second? remove battery and connect charger directly if it shows any sign at all. i think the mobile still can be recovered using JTAG. many had fixed their mobiles using jtags.
Click to expand...
Click to collapse
Not for a single split sec
Sent from my GT-I9082 using Tapatalk
akiratoriyama said:
I shouldn't remove the battery right ?
Also laptop is no longer detecting my oone for some strange reason (Disabled LG modem #2 and then it asked for a restart which I did)
Sent from my GT-I9082 using Tapatalk
Click to expand...
Click to collapse
Sad news... use this attached usbdeview tools (run as admin and delete all Ports and lets detect your pc all portss), try to detect your phone by reinstall usb driver, once device get detected, start device on bootloader by pressing HOME+VOL+Power button and flash recovery first by using Flashtool software http://www.flashtool.net/sshot1.php in your pc and click on "Power Icon" and select the "Fastboot Mode" and then click on "Select kernel to hotboot" and choose the recovery.img... Note this is for sony devices but you can flash img files on lg device too..
I too got bricked while using KDZ once and I did this and it worked. Best of luck :good:
Edit:
If above not help, try this tutorial too http://forum.xda-developers.com/showthread.php?t=1197111
mukulsoni said:
Sad news... use this attached usbdeview tools (run as admin and delete all Ports and lets detect your pc all portss), try to detect your phone by reinstall usb driver, once device get detected, start device on bootloader by pressing HOME+VOL+Power button and flash recovery first by using Flashtool software http://www.flashtool.net/sshot1.php in your pc and click on "Power Icon" and select the "Fastboot Mode" and then click on "Select kernel to hotboot" and choose the recovery.img... Note this is for sony devices but you can flash img files on lg device too..
I too got bricked while using KDZ once and I did this and it worked. Best of luck :good:
Click to expand...
Click to collapse
After you bricked was it like a dead body ?
No response to any thing aka charging,pressing power button etc
Sent from my GT-I9082 using Tapatalk
akiratoriyama said:
After you bricked was it like a dead body ?
No response to any thing aka charging,pressing power button etc
Sent from my GT-I9082 using Tapatalk
Click to expand...
Click to collapse
No.... it wasn't. Can you start your phone in emergency mode by pressing power + volume up + back button? let me know
mukulsoni said:
No.... it wasn't. Can you start your phone in emergency mode by pressing power + volume up + back button? let me know
Click to expand...
Click to collapse
Nope ;-;
No light no logo no emergency mode nothing
Sent from my GT-I9082 using Tapatalk
akiratoriyama said:
Nope ;-;
No light no logo no emergency mode nothing
Sent from my GT-I9082 using Tapatalk
Click to expand...
Click to collapse
Hard brick device!! Last option : remove battery, wait for 30 sec and then insert usb data cable (pc connected), at the same time pressing vol up+back button. See if it work
Edit:
One more option: Open your device back panel by using screw driver. On the device board, just remove the battery and reinsert. check this too if it Hard Reset your device. Best of luck
mukulsoni said:
Hard brick device!! Last option : remove battery, wait for 30 sec and then insert usb data cable (pc connected), at the same time pressing vol up+back button. See if it work
Edit:
One more option: Open your device back panel by using screw driver. On the device board, just remove the battery and reinsert. check this too if it Hard Reset your device. Best of luck
Click to expand...
Click to collapse
Which battery ?
Is there any inbuilt battery ?
Sent from my GT-I9082 using Tapatalk
akiratoriyama said:
Which battery ?
Is there any inbuilt battery ?
Sent from my GT-I9082 using Tapatalk
Click to expand...
Click to collapse
Wait....
Before the above, just try this tutorial (read carefully second para) http://forum.xda-developers.com/showthread.php?t=1197111
mukulsoni said:
Wait....
Before the above, just try this tutorial (read carefully second para) http://forum.xda-developers.com/showthread.php?t=1197111
Click to expand...
Click to collapse
Already tried
Sent from my GT-I9082 using Tapatalk
akiratoriyama said:
Already tried
Sent from my GT-I9082 using Tapatalk
Click to expand...
Click to collapse
Ok then.... Open your device back panel by using screw driver andd remove on-board battery and reinstall. lets see
Hi XDAs
I have a problem with charging my phone.
One night I plugged my charger into the phone , after 3 hours I heard a explosion voice. Battery was very hot and when I removed the charger again I heard a voice. Now I have changed charge port.
Now when I turn on my phone It wont show that device is charging but when I turn it off and then again I turn it on it shows that device is charging.
when I remove charge cable and then again I plug it in. Again it wont show that is charging When I turn it off it shows that is charging.
Where is problem?
Its better to take it to service center. Must be some hardware damage.
swat4samp said:
Its better to take it to service center. Must be some hardware damage.
Click to expand...
Click to collapse
I took it ti service center but they didnt do anything.
I think its because of changing their center.
I must take it there again.
They were in a hurry that days ...:beer::beer:
Sent from my GT-S5670 using Tapatalk 2
Maybe u can check it on other rom:sly:
Galaxy_Rohit said:
Maybe u can check it on other rom:sly:
Click to expand...
Click to collapse
Now i am on 2.3.6 official rom.
I took it to the service center to flash because when I wanted to flash it with odin "Usb not recognized" would appear on screen.
I think they flashed it with box.
Now I still have problem with charging.
Sent from my GT-S5670 using Tapatalk 2
matinzd619 said:
Now i am on 2.3.6 official rom.
I took it to the service center to flash because when I wanted to flash it with odin "Usb not recognized" would appear on screen.
I think they flashed it with box.
Now I still have problem with charging.
Sent from my GT-S5670 using Tapatalk 2
Click to expand...
Click to collapse
U should have checked ur phone regarding this charging issue at the care centre itself in front of those so-called experts at the time of receiving ur phone. So that u could have someone(care centre experts) to blame on.:sly:
matinzd619 said:
Now i am on 2.3.6 official rom.
I took it to the service center to flash because when I wanted to flash it with odin "Usb not recognized" would appear on screen.
I think they flashed it with box.
Now I still have problem with charging.
Sent from my GT-S5670 using Tapatalk 2
Click to expand...
Click to collapse
USB not recognized? i think thats because your computer isnt installed Samsung Kies. You have to install kies before flashing.
Please press thanks if i helped
Trying to install the TWRP on my LGD850 from AT&T , after the reboot then got black , doens't starts in any way , no dowmload mode or anything else , but the Computer recognize as MTP and LG Mobile USB serial port (com30) , so any ideas how can I bring to life my phone? thanks
Madness_logic said:
Trying to install the TWRP on my LGD850 from AT&T , after the reboot then got black , doens't starts in any way , no dowmload mode or anything else , but the Computer recognize as MTP and LG Mobile USB serial port (com30) , so any ideas how can I bring to life my phone? thanks
Click to expand...
Click to collapse
What happens when you try to enter download mode as you'll need that to go back to stock.
Sent from my LG-D800 using Tapatalk
hyelton said:
What happens when you try to enter download mode as you'll need that to go back to stock.
Sent from my LG-D800 using Tapatalk
Click to expand...
Click to collapse
Nothing , it doesnt do anything like I said
Madness_logic said:
Nothing , it doesnt do anything like I said
Click to expand...
Click to collapse
Made sure it was connected to a USB 2.0 port? And not a 3.0 port when trying?
Also if it's a "hard brick" you cannot fix that.
Sent from my iPhone using Tapatalk
hyelton said:
Made sure it was connected to a USB 2.0 port? And not a 3.0 port when trying?
Also if it's a "hard brick" you cannot fix that.
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
Shi*, also its in a usb 2.0 , and sure I cant Fix it? because when I connect USB cable without the battery show a empty battery with a yellow triangle
Madness_logic said:
Shi*, also its in a usb 2.0 , and sure I cant Fix it? because when I connect USB cable without the battery show a empty battery with a yellow triangle
Click to expand...
Click to collapse
If there's no download or fastboot mode I don't think there's nothing else can be done about that.
Sent from my iPhone using Tapatalk
http://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359
Follow this guide but dl files for att not sprint