[Q] Stuck in ODIN mode - Verizon Samsung Galaxy S III

I tried installing a ROM i found on this forum but when i went to reboot and turn back on a warning messege appeared saying something along the lines that the OS was blocked by verizon wireless and i had to bring my phone to the nearest store. It wouldnt reboot into recovery it just kept flashing back to the messege. Im not sure what i did but i managed to boot the phone into something called ODIN mode? It asked me if i wanted to install some firmware in which i assumed was the finishing process to the ROM installation but now its just hungup at the "Downloading...Do not turn off target!!" screen. Im not sure what to do from here any help would be greatly appreciated thanks!

cvbcbcmv said:
First, relax if you're nervous. There is nothing wrong. You didn't unlock your bootloader before flashing the rom, that's why the message is there. Read some of the threads (I'm mobile so I can't link but I'm sure there stickied in one of the sections) about restoring to stock. Grab the Odin file and read a tutorial if the thread doesn't have one on how to flash it. It's just another method of flashing to stock. I would give you step by steps if I wasn't on my phone in bed, if you still need help tomorrow hit me with a pm and ill help you as soon as I get home from school. I can get you familiar with the important things about rooting and flashing on this phone.
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
Thanks for the quick reply. Is it okay to power off the phone if it says its downloading still. And my phone used to be rooted until the OTA updated it to 4.0.4 for some reason it completely slipped my mind to unlock the bootloader again.

You aren't downloading unless you've hooked your phone to your computer and have run Odin
Sent from my SCH-I535 using xda app-developers app

Related

Bricked....Ugh

Ok so I've been rooted and unlocked for a while now, but stayed with the stock rom as when I tried out Synergy Nightlies it gave me some errors. So I went to try out CleanRom 2.1, people liked it and I didn't notice any flashing errors. So I flashed it through CWM 6.0.1 and it gave me the yellow exclamation mark saying I had unauthorized data on my phone. So I followed the sticky on how to unbrick my phone using the 2 boot loaders and the root66 stock image. My issue is that when running the root66 stock image through Odin it fails at _XmitData_Read, which seems to be somewhere in system.img.ext4. I've tried rebooting the computer, the phone, Odin, it just doesn't work. So when I reboot my phone after the failure I get Odin auto loading saying:
Odin Mode
Product Name: SCH-I535
Custom Binary Download: No
Current Binary: Samsung Official
System Status: Official
Qualcomm Secureboot: Enable
Then an image of a phone, 2 dots, a yellow exclamation, 2 dots and a computer are shown with the message "Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again.
Anyone able to help me?
can you still get to odin mode? also if you have kies installed on the computer erase it.
kidhudi said:
can you still get to odin mode? also if you have kies installed on the computer erase it.
Click to expand...
Click to collapse
Kies isn't installed on the computer and yes I am still able to get into Odin Mode.
I'm under the impression that "unauthorized software" message comes from the locked bootloader (if I'm wrong about that someone plese correct me.)
Sounds like you're functional enough to be able to Odin back to stock and go from there - that's what I'd try. See the stickied thread in the Q&A forum.
I would run the FULL VRALF stock image through ODIN to return to stock. That is always the safest way out of a sticky situation.
Thanks guys, according to another post the version of EZ-Unlock I used most likely gave a false report and never actually unlocked my phone. The problem with going back to stock, which if what I'm trying to do, is that it fails.
Could be an USB issue - an intermittent connection would be most likely to cause problems while sending the system partition since that's the biggest. I've had problems using adb from time to time if I plug into one of the front-panel ports on my PC but no trouble with one on the back.
Maybe try switching ports or try a different cable ...
Actually what usb plug are you using on your computer? You should be using one in the back of your computer by the power supply. Seen the front jacks not work correctly for large transfers. Finally, try another usb cable.
Sent from my SCH-I535 using xda app-developers app
Strange.... i was able to flash syergy on thefirst try. Never used odin during the whole process....
If youre rooted you need to make sure you have a custom recovery in place like cwm or twrp. Make sure you make a nand-backup.
I used casual to flash unsecure bootloader, with that and recovery in place you should be able to flash roms without any hitches....
I could never find a comprehensive guide on using odin so i never got around to testing it
kintwofan said:
Actually what usb plug are you using on your computer? You should be using one in the back of your computer by the power supply. Seen the front jacks not work correctly for large transfers. Finally, try another usb cable.
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
So far I've tried 3 different USB cables and both a desktop, both front and back ports and a laptop, each one fails on the write of XmitData under system.img.ext4
I had a custom recovery installed and Odin is only being used to get me back to a stock rom, otherwise I did all my flashing under CWM 6.0.1 or twrp. I think the whole fake unlocked bootloader just hard bricked the software.
EDIT: Come to think of it I remember waking up to my phone in download mode. I think Verizon tried to install the update to my phone while I was sleeping. Granted it failed at the end, but I'm wondering if that did something to brick me now.
If you can get in download mode it can be saved. I woud re download the stock firmware or the 66, but personally i would go bone stock. You may just have a bad download.
Sent from my SCH-I535 using xda app-developers app
kintwofan said:
If you can get in download mode it can be saved. I woud re download the stock firmware or the 66, but personally i would go bone stock. You may just have a bad download.
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
Yea, I'm currently downloading at the speed of slug the newest update from the forums, will probably just redownload at home, since it's going to take over an hour >.<
EDIT:
Does anyone have a link for an older EZ-Unlocker, that is known to work, so that I don't get this problem yet again.
FIXED!
Ok, so using the newest stock rom from the dev forum worked. Can someone please give me a link to an old EZ-Unlocker so I can flash without worrying about another massive brick in my palm. I'm guessing that running the original root66 stock rom through dropbox somehow corrupted it.
LlirasChosen said:
Ok, so using the newest stock rom from the dev forum worked. Can someone please give me a link to an old EZ-Unlocker so I can flash without worrying about another massive brick in my palm. I'm guessing that running the original root66 stock rom through dropbox somehow corrupted it.
Click to expand...
Click to collapse
I personally suggest not using the app if you already had trouble. Just root your phone using the Debug Root method in Development, download the aboot.img from Adam Outlers thread HERE to your phone, and run the commands at the very bottom in Terminal Emulater app (from the market).
That way you know for sure your bootloader is unlocked. This is what I have done and never had an issue.
Edit: Glad you got your issue resolved!

[Q] Houston, boy do I have a problem!

Just rooted my new SGS3 using New Root Method Released for Verizon’s Galaxy S3, No Odin Required. i did the data & kelvic wipe then install Clean Rom 5.0. All progressed without a hitch. Even backed up with CWM prior to flash.
I rebooted into the new rom and got this: System software not authorized by Verizon Wireless... rebooted several time with same result.
What can I do now? Thanks for your help.
Just a wild guess, but me thinks your bootloader is still locked! But I'm not sure that will even apply because I rooted my device before unlocking the bootloader. But I rooted my device via ODIN first.
You can try EZ-Unlock via the Market. The GUI is still very buggy and will show the status as unknown but the internal workings of the app works good.
You got nothin to loose in trying. Go back to stock and give it another whirl after you've unlocked the bootloader.
Of that fails then I would suggest using the tried and true method..ODIN.
G'luck!
yup your bootloader is still locked
check the downloads thread and use version 1.2.
That means your boatloader is locked. You now must Odin back to stock and start over. Droid style has a guide stickied in the development thread. Follow section 6 of it.
Next time use ez unlock version 1.2 to unlock you boatloader.
Sent from my SGS3 running Eclipse 2.1
downloads list
http://forum.xda-developers.com/showthread.php?t=1850506
tekrhino said:
Just a wild guess, but me thinks your bootloader is still locked! But I'm not sure that will even apply because I rooted my device before unlocking the bootloader. But I rooted my device via ODIN first.
You can try EZ-Unlock via the Market. The GUI is still very buggy and will show the status as unknown but the internal workings of the app works good.
You got nothin to loose in trying. Go back to stock and give it another whirl after you've unlocked the bootloader.
Of that fails then I would suggest using the tried and true method..ODIN.
G'luck!
Click to expand...
Click to collapse
Thanks. I can't get past the warning dialogue screen. Pulled the battery, no good. PC can't see the phone with USB.
Prophotog said:
Thanks. I can't get past the warning dialogue screen. Pulled the battery, no good. PC can't see the phone with USB.
Click to expand...
Click to collapse
Yikes, ok
You have to get into DOWNLOAD MODE.. Power+ Volume Down+ Home key at the same time after a fresh battery pull.
Do a search on the Development forum to set up Odin on your PC.
YOU Must FOLLOW directions EXACTLY our you will have very expensive BRICK!
This forum could help:
http://forum.xda-developers.com/showthread.php?t=1762709
Or even better, this one:
http://forum.xda-developers.com/showthread.php?t=1840030
tekrhino said:
Yikes, ok
You have to get into DOWNLOAD MODE.. Power+ Volume Down+ Home key at the same time after a fresh battery pull.
Do a search on the Development forum to set up Odin on your PC.
YOU Must FOLLOW directions EXACTLY our you will have very expensive BRICK!
This forum could help:
http://forum.xda-developers.com/showthread.php?t=1762709
Or even better, this one:
http://forum.xda-developers.com/showthread.php?t=1840030
Click to expand...
Click to collapse
Thanks to everyone!! Looks to be a long night. :>)
tekrhino said:
Yikes, ok
You have to get into DOWNLOAD MODE.. Power+ Volume Down+ Home key at the same time after a fresh battery pull.
Do a search on the Development forum to set up Odin on your PC.
YOU Must FOLLOW directions EXACTLY our you will have very expensive BRICK!
This forum could help:
http://forum.xda-developers.com/showthread.php?t=1762709
Or even better, this one:
http://forum.xda-developers.com/showthread.php?t=1840030
Click to expand...
Click to collapse
I lol'ed at your post. A little dramatic, don't you think? He's not even close to bricked. Just Odin from download mode back to stock, and redo the steps with bootloader unlock.
Here is a gift (working ez-unlock v1.2)
http://dl.dropbox.com/u/42057363/com.mmmeff.ez.unlock_3.apk
@Techsavvy
Yeah, perhaps a tad overdone on the theatricals.
Cut me some slack, I'm taking acting classes..lol
And... I know... I know..don't quit my day job!
Still having issues. I "think" I am in the download mode. Screen says Downloading.... It has Odin in red in top left corner. Device connects with Odin. BUT I am not getting a PASS message when flashing VRALEC bootchain. Last text line in Odin is: <OSM> Leave CS...
I have tried several attempts.
Suggestions?
Prophotog said:
Still having issues. I "think" I am in the download mode. Screen says Downloading.... It has Odin in red in top left corner. Device connects with Odin. BUT I am not getting a PASS message when flashing VRALEC bootchain. Last text line in Odin is: <OSM> Leave CS...
I have tried several attempts.
Suggestions?
Click to expand...
Click to collapse
No need to do the boot chains. Just follow section 5 of this guide and I recommend root 66 for the ROM you flash
http://forum.xda-developers.com/showthread.php?p=28530394
Sent from my SGS3 running Eclipse 2.1
tekrhino said:
@Techsavvy
Yeah, perhaps a tad overdone on the theatricals.
Cut me some slack, I'm taking acting classes..lol
And... I know... I know..don't quit my day job!
Click to expand...
Click to collapse
I appreciate the theatricals...however, I am having issues with Odin. Can't get the Pass message. I assume the "Downloading..." text means I'm in the download mode. Tried several attempts. I AM glad I'm not close to bricked too! Can't afford $600 or a divorce. Might have to sell a camera instead.
Prophotog said:
Just rooted my new SGS3 using New Root Method Released for Verizon’s Galaxy S3, No Odin Required. i did the data & kelvic wipe then install Clean Rom 5.0. All progressed without a hitch. Even backed up with CWM prior to flash.
I rebooted into the new rom and got this: System software not authorized by Verizon Wireless... rebooted several time with same result.
What can I do now? Thanks for your help.
Click to expand...
Click to collapse
And just for future reference, it's Dalvik, not Kelvic
Sent from my SCH-I535 using xda app-developers app
Prophotog said:
I appreciate the theatricals...however, I am having issues with Odin. Can't get the Pass message. I assume the "Downloading..." text means I'm in the download mode. Tried several attempts. I AM glad I'm not close to bricked too! Can't afford $600 or a divorce. Might have to sell a camera instead.
Click to expand...
Click to collapse
Just a heads up. You can get a real brick with Odin and easy. Follow the guide I linked earlier to a t and you'll be fine
Sent from my SGS3 running Eclipse 2.1
kintwofan said:
Just a heads up. You can get a real brick with Odin and easy. Follow the guide I linked earlier to a t and you'll be fine
Sent from my SGS3 running Eclipse 2.1
Click to expand...
Click to collapse
You are a scholar and a gentleman!! THANK YOU very much. You can have a portrait session on me any time. Name the time and place.
Prophotog said:
You are a scholar and a gentleman!! THANK YOU very much. You can have a portrait session on me any time. Name the time and place.
Click to expand...
Click to collapse
Cool, I take it you're up and running again. Just make sure you use ez unlock 1.2 next time. And the positive is you're an Odin pro now!
Sent from my SGS3 running Eclipse 2.1
Hi, I have a Verizon S3 flashed to Boost Mobile. I tried to gain root by flashing a stock rooted Rom and messed up the flash. I had to take it back to be flashed again  Now I'm more cautious before hand. I should have backed it up before attempting it, I know I know lol can anyone shed some light on how to update a flashed phone as well as how to root it. I could really use the help 
Also after I messed up the boost flash I paniced and flashed a sprint kernel hoping this would fix the problem. Since then anything that I've tried to view including taking camera shots and web browsing if done in landscape mode will be upside down, any remedy for this problem? I know now... root first, flash later. 
Sent from my SPH-L710 using XDA HD
Alex0826 said:
Hi, I have a Verizon S3 flashed to Boost Mobile. I tried to gain root by flashing a stock rooted Rom and messed up the flash. I had to take it back to be flashed again  Now I'm more cautious before hand. I should have backed it up before attempting it, I know I know lol can anyone shed some light on how to update a flashed phone as well as how to root it. I could really use the help 
Also after I messed up the boost flash I paniced and flashed a sprint kernel hoping this would fix the problem. Since then anything that I've tried to view including taking camera shots and web browsing if done in landscape mode will be upside down, any remedy for this problem? I know now... root first, flash later. 
Sent from my SPH-L710 using XDA HD
Click to expand...
Click to collapse
Sprint kernel is causing the inversion. Flash a vzw kernel. Read first flash later.
Sent from my SCH-I535 using xda app-developers app
Who ever did your flash might not done it right cause ya not supposed to lose a flash like that unless he didn't do things right. I can factory reset mine and I wont loose flash
Sent from my SPH-L900 using Tapatalk 2

"Unauthorized System Software" HELP! Tried to flash, got blocked

I just tried to flash CM10.1 onto my phone - which has been unlocked and rooted - now it won't even boot. I get a yellow "exclamation" and a message saying it detected system software not authorized by Verizon and to take my phone to Verizon! Am I screwed??
Help!!!
That means your bootloader wasnt unlocked. Use odin and flash back to stock and start over
Sent from my SCH-I535 using xda app-developers app
FrEaKeD me out! Going to try all that ODIN stuff again. Thanks!
(hope someone is still following this thread)'
I am using these instructions:
http://forum.xda-developers.com/showthread.php?t=2046439
I got to step 3 but it won't boot into recovery. I just get that error again that I have unauthorized software again.
I really appreciate any help.
Thanks.
You need to odin back to stock. You are trying to partially fix something that is broken.
Search is your friend. It is stickied. Look for return to stock. Then start over.
Sent from my SCH-I535 using Tapatalk 2
Thanks guys. I only have a loose grasp of rooting. I started over like you said. I have control of the phone again. Avoided an embarrassing trip to Verizon.

[Q] Can anyone help me finish rooting my GS3? Made small error.

So I was going along the steps in this thread right here, working on rooting and unlocking my phone: http://forum.xda-developers.com/show....php?t=2046439
I downloaded everything, Booted into ODIN mode and flashed the VRALEC, rebooted the phone into ODIN mode and flashed the custom recovery, I have a little unlocked padlock on my loading screen now so Im assuming thats how I know it worked. Unfortunately, I forgot to uncheck "Auto-Reboot". Now I'm too scared to go any further because the post says thats a very important step...so yea. Does anyone know if it's possible to roll it back to stock condition and start from scratch? And if it is, can anyone point me in the direction of learning how to do that? Thanks.
Raindeux said:
So I was going along the steps in this thread right here, working on rooting and unlocking my phone: http://forum.xda-developers.com/show....php?t=2046439
I downloaded everything, Booted into ODIN mode and flashed the VRALEC, rebooted the phone into ODIN mode and flashed the custom recovery, I have a little unlocked padlock on my loading screen now so Im assuming thats how I know it worked. Unfortunately, I forgot to uncheck "Auto-Reboot". Now I'm too scared to go any further because the post says thats a very important step...so yea. Does anyone know if it's possible to roll it back to stock condition and start from scratch? And if it is, can anyone point me in the direction of learning how to do that? Thanks.
Click to expand...
Click to collapse
After reeboot you should see custom recovery. If not,you can just repeat the step
Sent from my Micromax A110 using xda app-developers app

System software not authorized by Verizon Wireless has been found on your phone

Gang,
I rooted the phone, but I thought I unlocked the bootloader, but apparently it didn't work, when I boot the phone I get the error with a Yellow Triangle! -“System software not authorized by Verizon Wireless has been found on your phone. Please turn off phone and go to the nearest Verison Wireless Store for Help.
I've tried going into ODIN, with Down/Home and Power, but the phone only vibrates, when I press up, with blank screen.. If I wait for the "“System software not authorized by Verizon Wireless has been found on your phone. Please turn off phone and go to the nearest Verison Wireless Store for Help." It just sits there no change..
Is there any other way to unbrick the phone, did something change? I've done this to many other S3's but this one is giving me the flucks..
in the top left hand corner with verizon message is error in red: Secure Fail: Kernal
You softbricked. Odin back to the vzw. Then root again and unlock bootloader this time
Sent from my SCH-I535 using Tapatalk
Lehocki said:
You softbricked. Odin back to the vzw. Then root again and unlock bootloader this time
Sent from my SCH-I535 using Tapatalk
Click to expand...
Click to collapse
Thats the issue I can't get odin working,
morbeious said:
Thats the issue I can't get odin working,
Click to expand...
Click to collapse
Try to boot into download mode again, but hit down instead of up to see if you can bypass the check and get into the system. If you can all you have to do is use ez unlock.
Sent from my SCH-I535 using Tapatalk 2
Oh god, I got this message when I first did my phone. Literally had it for 10 minutes and just about died. Pull your battery, it'll boot into system. Then there's an app called EZ-Unlock. Use that and you'll be good.
DubleJayJ said:
Oh god, I got this message when I first did my phone. Literally had it for 10 minutes and just about died. Pull your battery, it'll boot into system. Then there's an app called EZ-Unlock. Use that and you'll be good.
Click to expand...
Click to collapse
Thats what I had done too while rooting my phone. EZ-Unlock fixed the the yellow triangle and unlocked my bootloader. No worries don't panic you just need to unlock your bootloader
morbeious said:
Thats the issue I can't get odin working,
Click to expand...
Click to collapse
Are you using a usb 3.0 port on your computer? Odin only works like 10% when I use a 3.0 port. Otherwise I would just try redownloading odin and right click on it and run as administrator.
Idk which method you used to root and unlock your bootloader but this always works for http://forum.xda-developers.com/showthread.php?t=2332825 I only use odin for flashing back to stock, I've had occasional fails when rooting or unlocking the bootloader.
But you only soft bricked your phone so it's fixable. Verizon just puts that's message there to scare people so you have to go in, be told your warranty is void and have to buy a new phone.
I will try a 2.0 usb, but are you daying the device should be found via odin even if the up/done home key combonation doesn't work?
Sent from my SCH-I605 using XDA Premium 4 mobile app
Does anyone have a link to a stock odin. There is a sticky under development section and when I flash the Odin file I still have root. Im hvaing issues with the same message and I've tried unlocking bootloader. When I odin using the .tar file the rom still has superuser on it. Am ibdoing somethinh wrong? Im looking forba stock odin with no superuser or anything so I can flash custom ROMS again.
Sent from my SCH-I535 using xda app-developers app
I did this a few times as well. All you have to do is follow the steps here to flash the bootchain. -- http://forum.xda-developers.com/showthread.php?t=2046439 Easy as pie and you should be back up in no time.

Categories

Resources