Hi, I've recently bought HCL ME Y2 tablet. I rooted the device and the device was normal after the root. But after some days, I found my device struck with the Logo screen (ME). But I still can access the recovery mode by pressing '+' key while pressing the power button. I wiped the cache, data/factory reset. But still I'm not able to boot into my device.
I tried googling to get the update.zip image for my Tab, but no luck.
So, I decided to install Modded version into my Tab. But as I'm new to the these tasks, I require your (expert's) opinion on choosing the right mod for my device. I'd like to install Jellybean on my device.
The configuration of my tablet is as follows :
1 Ghz Cortex A9
Mali 400 Graphics processor
7 inch 1024 * 600 Multi-touch IPS panel
2 Cameras (0.3MP- Front, 2MP -Back)
8GB Internal (I guess it has 8GB Card inside it which I cant remove)
Expandable upto 32GB through External slot
1080p Full HD Playback
Inbuilt 3G HSDPA SIM Slot
Bluetooth with A2DP
Wifi b/g/n
It has Mini HDMI port, Mini USB port along with Micro SD slot.
4000mAH battery.
Please help me choosing the right Mod !!
As far as I know nobody has ported a rom to y2 so I don't really know how you will install a moded rom?? for your problem go to the service center. By the way has anyone installed google play???
Thanks
mclarenmercedes said:
As far as I know nobody has ported a rom to y2 so I don't really know how you will install a moded rom?? for your problem go to the service center. By the way has anyone installed google play???
Click to expand...
Click to collapse
I've installed Play after rooting my device. It was working fine but after installing some more apps, my Tab suddenly switched OFF and was not able to boot in again.
Anybody owns a HCL Me Y2 ????
It'd be really grateful if somebody using HCL ME Y2 uploads their backed up ROM for me !!!!
I'm out of all other options here !!! Plz somebody HELP !
same kind of thing has happend to me as well now. it doesnt go beyond me logo
Sent from my U20i using xda app-developers app
dude try this http://hclmetab.blogspot.in/2012/11/hcl-me-y2-original-rom.html download the rom and follow the steps exactly!!!....WOrked for me
Official Firmware for HCL Me Y2
Official firmware of HCL ME Y2 now can be downloaded from this official site...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thanks for responding Riju
Riju95 said:
Official firmware of HCL ME Y2 now can be downloaded from this official site...
View attachment 2208922
Click to expand...
Click to collapse
Thanks Rijo for letting me know that HCL provides the ROM officially. Unfortunately I'm not able to enter my recovery mode.
I've posted the problem http://forum.xda-developers.com/showthread.php?t=2407156 in this thread.
I've tried everything else. Tab does not get detected by the HCL's software to download/upgrade the ROM.
Code:
adb shell
not working as well. I don't have fastboot drivers too. I think my tab got bricked. Check the post from the above link and tell me if I've some options left to try. Thanks in advance.
Final solution, I can ensure you this will work...
Brother, beleve me, you dont need any adb or fastboot commands to solve this problem. Our device don't have fastboot drivers.
Just download the official firmware from this link http://www.hclsupportservice.in/hclsupportservice.in/DriversDisplay.jsp?val=VGFibGV0&prodC=SENMIE1FIFRhYmxldA==&prodM=Y2
Extract the Y2_image.rar file on you PC by winrar. You will get four files named
1) factory_update_param.aml , 2) u-boot-aml-ucl.bin , 3) uImage_recovery ,4) update.zip
Click to expand...
Click to collapse
Now format a sdcrad (Minimum of 1 GB) to FAT32 and place all the 4 extracted files in it. DON'T CHANGE ANY FILE NAME. DON'T EXTRACT update.zip.
Then press Volume(-) key and power key. You device will take some time while upgradation process. After that your Y2 will reboot automatically. And your problem will be solved...
PS- Every Y2 tab have this boot freeze bug. This is the only way to fix it. The problem may occur again, in that case follow these instruction again.
IF YOU WANT PLAY STORE AND OTHER GAPPS IN YOUR Y2, THEN NOTIFY ME, I'LL UPLOAD A ROM WITH GOOGLE APPS.
Click to expand...
Click to collapse
PLEASE HIT THE THANKS BUTTON IF IT HELPS... :highfive:
Thanks a lot dude! Brought my tab alive again!
Riju95 said:
Brother, beleve me, you dont need any adb or fastboot commands to solve this problem. Our device don't have fastboot drivers.
Just download the official firmware from this link http://www.hclsupportservice.in/hclsupportservice.in/DriversDisplay.jsp?val=VGFibGV0&prodC=SENMIE1FIFRhYmxldA==&prodM=Y2
Extract the Y2_image.rar file on you PC by winrar. You will get four files named
Now format a sdcrad (Minimum of 1 GB) to FAT32 and place all the 4 extracted files in it. DON'T CHANGE ANY FILE NAME. DON'T EXTRACT update.zip.
Then press Volume(-) key and power key. You device will take some time while upgradation process. After that your Y2 will reboot automatically. And your problem will be solved...
PS- Every Y2 tab have this boot freeze bug. This is the only way to fix it. The problem may occur again, in that case follow these instruction again.
PLEASE HIT THE THANKS BUTTON IF IT HELPS... :highfive:
Click to expand...
Click to collapse
Thanks a lot dude! I was finally able to boot into my tablet after following your steps precisely. I've not used my tablet for almost a year because of this. And HCL has not at all supported my tablet. I'm excited I just wanted to
Code:
>>>Thanks a looooooooooooooooottttttttttttt * 10000
You are welcome bro.…
wizardvenkat said:
Thanks a lot dude! I was finally able to boot into my tablet after following your steps precisely. I've not used my tablet for almost a year because of this. And HCL has not at all supported my tablet. I'm excited I just wanted to
Code:
>>>Thanks a looooooooooooooooottttttttttttt * 10000
Click to expand...
Click to collapse
You are most welcome brother.... PM me if you have amy problem bro... I'll do my best to help you... :highfive:
HCL has the worst after sale service i've ever seen. They don't even know how to talk to customers. Their products are worse than the cheap chinese stuffs. Never ever buy anything from HCL.
You can press the thanks button if you want to thank. It really helps.... :laugh:
hcl me tablet
I cnt download dis rom from d site....its saying page error.pls help
Alternative download link
Nwachidon said:
I cnt download dis rom from d site....its saying page error.pls help
Click to expand...
Click to collapse
The official link from HCL works fine for me. What exactly is your problem with the download? If that cannot be resolved, try this alternative link http://www.sendspace.com/filegroup/alUctk9m4%2BcScTIvrjxMjA
hcl y2 booting problem
Nwachidon said:
I cnt download dis rom from d site....its saying page error.pls help
Click to expand...
Click to collapse
Dear Nwachidon,
Is your problem solved?
wizardvenkat said:
Thanks a lot dude! I was finally able to boot into my tablet after following your steps precisely. I've not used my tablet for almost a year because of this. And HCL has not at all supported my tablet. I'm excited I just wanted to
Code:
>>>Thanks a looooooooooooooooottttttttttttt * 10000
Click to expand...
Click to collapse
Y-DROID v2.0 Released Y-DROID v2.0
http://forum.xda-developers.com/showthread.php?t=2500416
Riju95 said:
Y-DROID v2.0 Released Y-DROID v2.0
http://forum.xda-developers.com/showthread.php?t=2500416
Click to expand...
Click to collapse
Thanks a lot dude! I'll definitely try it and comment on that thread.
All HCL Stock firmwares can be found Here :
http://forum.xda-developers.com/showthread.php?t=2527771
Press thanxx if helped
HCL ME Y2 Booting error
Dear Mr. Riju thanks for your information, I have installed and it worked for 1 day only and the next day noticed same problem, it didnt work ...would please help me please.
thanks
Related
Karbonn A30, the 5.9 inch phablet, that just recently attained the available tag at Saholic for which you have to cough up around INR 11k.
The device becomes much more interesting because of the 5.9" screen size which beats even Galaxy Note II by a good one cm!
Pic:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The complete specs of this device are not out yet, and not disclosed by the shopping site itself. So, if you have got hold of one, I would love to get a reply from you. Let's sum up those which are confirmed as of now:
5.9 inch Capacitive Touchscreen
1 GHz dual core processor
8 MP rear camera with dual flash
1.3 MP front camera
2,5000 mAh battery
All basic connectivity options like 3G, bluetooth, wifi and GPS
One important thing that's missing from the confirmed specs sheet is the amount of RAM. While we can't expect 1 GB ram at this price point, anything below 512 MB would just kill the deal.
Rooting Method (Generic for all ICS phones):
Bin4ry tool works great on this phone
Don't know how to use that? Read this: http://forum.xda-developers.com/showthread.php?t=1886460
The above rooting method should work flawlessly on A30, as it is working on all Karbonn android phones (in fact every Android phone) running on ICS or above.
Let's hope that the development on this phone gets a quick boost when someone confirms this rooting method. :victory:
Here you can Check A30
Why A30?
Why to root A30 anyway?
Is it capable to do anything extra?
It has enough internal storage to install all the apps!
I know the possibilities that are created after rooting....What A30 can get with rooting?
And yes, just got one for 11.5k yesterday...it has 512MB RAM...
Rooted.....installed SU , root explorer , ROM manager. But all I want to do is install apps on the external SD card ....Karbonn A18 allows it.....Any suggestions?
Sent from my Karbonn A30 using xda premium
kalya said:
Rooted.....installed SU , root explorer , ROM manager. But all I want to do is install apps on the external SD card ....Karbonn A18 allows it.....Any suggestions?
Sent from my Karbonn A30 using xda premium
Click to expand...
Click to collapse
Hi kalya, (is that name taken from chhota bheem?, lol)
How did you root the phone? Which tool did you use?
Btw, you can use my swapping mod to swap your sdcards, that might solve your problem. Link to that is present in signature.
And here is a list of some really nice reasons to root. :http://www.droidiser.com/2012/11/what-after-rooting-apps-tips.html
Binary!
I did it with Root_with_Restore_by_Bin4ry v15. (latest is V18).:victory:
Card swap..I shall try..but A custom ROM with built in option to install apps on the EXTERNAL SD will be welcome.:fingers-crossed:
Having owned HD2 , my expectations for any handsets are going to be very very high...
I am a medical guy and no techie so I do what XDA people say and stay happy...let's see what happens with this A30's developement.
[And NO...this is my nickname :laugh:]
i can help in building cm9/10 but someone have to get the CWM recovery running successfully first.bricked my device once tryng to get it running
Bravo
michael.the.don said:
i can help in building cm9/10 but someone have to get the CWM recovery running successfully first.bricked my device once tryng to get it running
Click to expand...
Click to collapse
I have A30 too
and m learning CWM Making for New Device
Currently m setting up Ubuntu PC
will update you soon
here is s gscript that lets u dump all the partitions.a ful rom backup.
i have a full dump.only the PRELOADER and DSP_bl is corrupted.
i cant get them to load in sp flash tools
see the attached gscript.for complete backup use the "back_mt6575_a4_v2c" script.
i have attacher the scatter file if some one needs it.my device is still in servicing.so i cant go foreward.
{credits for the "back_mt6575_a4_v2c" script to original developer.i fount it not mine.i dont knw whos it is.}
I m planning to buy this phone..can anyone confirm the ram of the karbonn a30..is the phone really of 512 ram..& is the gaming smooth on this phone..thanks
Sent from my ZTE-RACER using xda app-developers app
may someone plz post karbonn A30 ROM here so I can flash it as my A30 has got some software prblms n touch many times is not working n hanging as well
Rooring Karbonn A30
kalya said:
I did it with Root_with_Restore_by_Bin4ry v15. (latest is V18).:victory:
Card swap..I shall try..but A custom ROM with built in option to install apps on the EXTERNAL SD will be welcome.:fingers-crossed:
Having owned HD2 , my expectations for any handsets are going to be very very high...
I am a medical guy and no techie so I do what XDA people say and stay happy...let's see what happens with this A30's developement.
[And NO...this is my nickname :laugh:]
Click to expand...
Click to collapse
Hi Kalya,
I have tried rooting my Karbonn A30 with all the tools out there but it refuses to root.
I have even tried Root_with_Restore_by_Bin4ry v18 but no success
Please tell me in which mode from the following it should be connected when i connect usb.
1.) Storage mode
2.) Media Mode
3.) Camera mode
USB debugging is on.
I always get the errors like,cannot push SU,file not found,no permission, directory not found and all that stuff.
Please help.
regards
Stan
Clone Caught!!
Hi Guys..
Look A Like of Karbonn A30 is Vsun i1
http://www.vsunmobile.com/vsun-i1.htm
Press THANKS if you like my work..
cmw
any proper guide to make a cmw? i have a rooted a30
hi!
we in the philippines just got this phone and it's called Cherry Mobile TitanTV. It's slightly upgraded version with 1gb ram. This root method works. Anyone who's willing to work with us to share files for our stock rom and get your version will be awesome.
stock rom error dsp_bl
having an error on "dsp_bl" this is for the stock rom of CHERRY MOBILE TITAN TV same as KARBON A30
CWMR, TWRP, Stock Recovery
Clockworkmod - CWMR - v6.0.1.5
https://mega.co.nz/#!YUgEkSKC!JjokMRNW9dmpk5XbVVSBKz4LAi9fjcAWkzuChCDuE4s
TWRP Lewa Recovery - v1.0
https://mega.co.nz/#!oVoS2ABB!TGXNFF0dL6V5J2enBS0juGYWXKRhwOpPddJV0GC_q_g
TWRP Lewa Recovery - v2.3.2.3
https://mega.co.nz/#!9d5FxIpT!XqBoqyiDJg914Tfajwp4i3xioMAjo9ZVI2zf5LqjRbc
Stock Recovery
https://mega.co.nz/#!dAZSDCba!CP49czZxvdpbKBG3gWzPMzSv3bxdFRi8AQKvEI2-5z4
Enjoy
Hi guys im here too.. 2 weeks to go i will buy this too.
Sent from my GT-I9003 using xda premium
stock rom
michael.the.don said:
here is s gscript that lets u dump all the partitions.a ful rom backup.
i have a full dump.only the PRELOADER and DSP_bl is corrupted.
i cant get them to load in sp flash tools
see the attached gscript.for complete backup use the "back_mt6575_a4_v2c" script.
i have attacher the scatter file if some one needs it.my device is still in servicing.so i cant go foreward.
{credits for the "back_mt6575_a4_v2c" script to original developer.i fount it not mine.i dont knw whos it is.}
Click to expand...
Click to collapse
have the same problem using a bakuptool v2e at my first try ... i just run again the script and its good... you just have to delete your first dumped files. and try again. good luck..
Since Karbonn A30 is a rebranded of VSUN i1 this should work with the phone.
CUSTOM ROMS from VSUN i1
Vsuni1 V0019
http://hugefiles.net/rk1z1rxafcyk
==========================================
Vsuni1 V0019 - Landscape
Download: http://hugefiles.net/p2e5fh4co70s
B. Font Package
Download:http://hugefiles.net/rb6vhs1xt1cn
C. SystemUI
Download:http://hugefiles.net/42tolb8cpekx
==========================================
Baidu
Download:http://hugefiles.net/5s9rbe5repcj
=========================================
Lewa OS
Download:http://hugefiles.net/2j8gnnvhzqfm
=========================================
Vsun i1 WP8
Download:http://hugefiles.net/zqhcyhdkle60
=========================================
MIUI V4
Download:http://hugefiles.net/q8w3lv48gzja
========================================
Samsung Interface
Download:http://hugefiles.net/rcy9qd4sir01
Click to expand...
Click to collapse
Here is the Micromax Canvas Blaze MT500 Official Stock Firmware/Rom :
Link : https://www.adrive.com/public/eB7Z4..._MMX_EMCP_SD5DH26A_4G_2013-11-01(Express).rar
Micromax Canvas Blaze MT500, The first Micromax CDMA + GSM Smartphone, Canvas Blaze is built keeping in mind your love for blazing Internet speeds.
It has a powerful 1 GHz Snapdragon S4 Dual Core processor, an impressive 12.7 cm (5) screen, powered by an immensely long-lasting 1850 mAh battery.
Android 4.1.2 Jelly Bean
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
How to Flash/Upgrade :?
Download : Software Upgrade tool
Download : Drivers
A. Remove SIM card & TF card, also please backup files in handset.
B. Install USB driver.
C. Power on handset firstly, and then connect handset with PC, there
will show COM port of “Diagnostics 9025”(or “DIAG 9025”).
Start software download guide:
1. Click “QCOM_MultiDnload_ENU.exe” to open SW download tool.
2. Port Mode: select the COM port which shows in device manager.
3. Software Version: press Software Version button, select the SW
version you want to upgrade, and then click OK button.
4. When you click “OK” button, it will check MD5 value automatically,
when finish checking, it will prompt you to click “Start All” or “Start”
button to upgrade SW version.
5. “Open Device Manager”>> COM & LPT, to get the COM port number
on your PC, and select the concordant one on the home interface of
the tool.
6. After select Software Version, Port Mode and COM port number then
press “Start All” or “Start” button to download software.
7. Upgrade tool will connect handset firstly, then switch to download
mode.
8. And download ROM of handset.
9. Finish upgrading software.
?? Still confused, The software upgrade guide is included with screenshot along with the Software upgrade Tool.
In case after upgrading you find endless searching for service or no service then here is the MT500 MMX NVTool.
What is NV and what is NV Tool ??
NV file is non volatile memory
this file store the memory with out voltage support
when u disconnect the battery , and put it again the time of the cell changed , TIME need continuous voltages
but when u remove the battery set security code not changed .. mean it dont require voltages
in NV such memories are saved which dont require voltages like:
Security Code
Network Code
Profile Setting
Network Calibration
Incoming / Outgoing Call Records
Contacts
In Samsung this file called EEPROM (electronically erasable programmable read only memory)
In Nokia this file called PM (Permanent memory)
In LG its called NVM (non voltile memory)
Again the Guide to Change MMX NV is available with screenshot within the MT500 MMX NVTool.
Try Framaroot by xda member alephzain to root this phone.
1. Enable USB Debugging. Then Download FramaRoot.apk from the above mentioned thread.
2. Install, and open the app.
3. Select Install SuperSU from the drop down menu.
4.Click on Gandalf option.
It should now root the phone and install supersu app. Restart your phone and your phone should be rooted. If the Framaroot crash try it a couple of times it should root your device.
If the app works do not forget to appreciate the the developer of Framaroot.
And now as always : Use this at Your own Peril. I will not take any responsibility on whatever may happen with your Micromax Canvas Blaze.
mt 500 bricked after update
i tried with sptools and the phone got restored thanks eveyone
i tried to upgrade my mt 500 mts canvas blaze with mt500 stock rom official, the process were correct and success but now phone is dead please help
anyone please hel me to root canvas blaze mt500
thanks in advance
rishialpy said:
i tried with sptools and the phone got restored thanks eveyone
i tried to upgrade my mt 500 mts canvas blaze with mt500 stock rom official, the process were correct and success but now phone is dead please help
Click to expand...
Click to collapse
Now your phone is OK or bricked. You mean this procedure is no good.
Sent from my MT500 using XDA Premium 4 mobile app
Heyi OP any way to unlock network lock so that other CDMA Network can also be used other than MTS
Sent From My Sony M Dual C2004
dsmas said:
Now your phone is OK or bricked. You mean this procedure is no good.
Sent from my MT500 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
@dsmas now my fone is ok after instalation the root was sucess
rishi
SArnab©® said:
Heyi OP any way to unlock network lock so that other CDMA Network can also be used other than MTS
Sent From My Sony M Dual C2004
Click to expand...
Click to collapse
No. Will share if I come to know of any working method.. :fingers-crossed:
Hello Developers. Can someone of you develop custom roms for Blaze MT500.
deleted.
rishialpy said:
i tried with sptools and the phone got restored thanks eveyone
i tried to upgrade my mt 500 mts canvas blaze with mt500 stock rom official, the process were correct and success but now phone is dead please help
Click to expand...
Click to collapse
Will you please detail out your success story.
In SP tools which file you selected? thanks in advance.
The Rooting method is Already there in the OP :
rishialpy said:
anyone please hel me to root canvas blaze mt500
thanks in advance
Click to expand...
Click to collapse
The Rooting method is Already there in the OP :angel:
Cheerss :good:
Dear @ rishialpy. Would you please guide how you were able to flash stock rom. Thanks.
Dear OP, Hi. Have you got any comment on the following partial post. Thanks. Bcoz, I going to flash and I request your confirmation before proceeding.
rishialpy said:
i tried to upgrade my mt 500 mts canvas blaze with mt500 stock rom official, the process were correct and success but now phone is dead please help
Click to expand...
Click to collapse
Can someone please provide me CONTACTS file for MT500. Thanks.
@ rishialpy, may I once again ask you , how you were able to flash this stock rom? Thanks.
dsmas said:
Dear OP, Hi. Have you got any comment on the following partial post. Thanks. Bcoz, I going to flash and I request your confirmation before proceeding.
Click to expand...
Click to collapse
Follow the instruction given in the OP.. SP tools is for Mtk device this is a Qualcomm device...
Great Great Success. @ MKG Thank you, Thank you very much Million times. :good::good::good::good::good
PS. I would have done this earlier, only if rishialpy did not confuse / misguide: Very Sad.
Welcome
dsmas said:
Great Great Success. @ MKG Thank you, Thank you very much Million times. :good::good::good::good::good
PS. I would have done this earlier, only if rishialpy did not confuse / misguide: Very Sad.
Click to expand...
Click to collapse
u Welcome !! .. I hav no Idea hw he came up with the Sp tools stuff, Guess he just saw that it's a Micromax and thought its a MTK device, and
gave a random comment.
:angel:
CDMA unlocked ?
Is this rom only for MTS,
Or can be installed on MTS MT500 and can be used for R-CDMA.
I have tested on default MT500 MTS version, only calls and sms works,
NO DATA yet.
any solution ?
I have a biggest problem plz help me to solve it.
My micromax mt500 is not working properly.It is not dead but my my play store,YouTube etc and other Google apps are not working.It shows that "please update your Google services".I am annoyed now.I can't do anything.Plz someone help.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
SPECIFICATION
Recovery
CWM : Visit Thread
ROM's
Add-on's
Internal/External SD Swap Patch : Visit Thread
Sam Solomon said:
SPECIFICATION
Recovery
CWM : Visit Thread
ROM's
Add-on's
Click to expand...
Click to collapse
Hi
Can please post instructions to root Nuclear X? I don't know much about technical stuff but I can do it by following instructions. It's a request.
Never mind. It's already done.
kage2k3 said:
Never mind. It's already done.
Click to expand...
Click to collapse
Added SD Swap patch
Sam Solomon said:
Added SD Swap patch
Click to expand...
Click to collapse
Thanks for the patch. I have rooted my phone but can you please instruct how to flash that CWM recovery...after that I can use the patch.
kage2k3 said:
Thanks for the patch. I have rooted my phone but can you please instruct how to flash that CWM recovery...after that I can use the patch.
Click to expand...
Click to collapse
Use SP Tool to flash the cwm img file to phone..then go to recovery mode... [volume + and power button ] ... Install zip from sd card...done..reboot
Stock Rom Please?
Hello. I'v seemed to brick my device and nothing is working. The CWM backup does not restore. Please can someone give me the stock ROM of the phone?
Sam Solomon said:
SPECIFICATION
Recovery
CWM : Visit Thread
ROM's
Add-on's
Internal/External SD Swap Patch : Visit Thread
Click to expand...
Click to collapse
Hi i love this IBerry Auxus Nuclea X phone specs and although i have not bought it yet i am thinking to buy it soon but i always like to have the following thing in the phone i.e stock recovery, twrp recovery/clockworkmod recovery,stock ROM and if possible cynogenmod ROM but thats not important can you make those request if so i would be willing to pay 1000-2000 indian rupee (Negotiable) for it if you want romdump or anything i am willing to provide it to you that is after i buy the phone if you cant can you provide me with any member who does this work thank you for your time........
anandisrocking007 said:
Hi i love this IBerry Auxus Nuclea X phone specs and although i have not bought it yet i am thinking to buy it soon but i always like to have the following thing in the phone i.e stock recovery, twrp recovery/clockworkmod recovery,stock ROM and if possible cynogenmod ROM but thats not important can you make those request if so i would be willing to pay 1000-2000 indian rupee (Negotiable) for it if you want romdump or anything i am willing to provide it to you that is after i buy the phone if you cant can you provide me with any member who does this work thank you for your time........
Click to expand...
Click to collapse
Check PM...
Rooting Method
Here's the method to root this phone - http://forum.xda-developers.com/showthread.php?t=2764593
---------- Post added at 11:49 PM ---------- Previous post was at 11:37 PM ----------
Here's the stock ROM of the phone for those who were searching. Can also be used as a base for custom ROMs as it's compatible with the Android Kitchen. - Download Here!
Hi Mansehej
Can you please help me to know ,how you unbricked your phone,it seems i have soft bricked my phone and even flashing with stock rom of auxus nuclea x is not working(getting green all ok ,but then also phone is stuck in first logo and than black screen).
Pl help
harsh300684 said:
Hi Mansehej
Can you please help me to know ,how you unbricked your phone,it seems i have soft bricked my phone and even flashing with stock rom of auxus nuclea x is not working(getting green all ok ,but then also phone is stuck in first logo and than black screen).
Pl help
Click to expand...
Click to collapse
Flash again without battery,,, :angel:
Sam Solomon said:
Flash again without battery,,, :angel:
Click to expand...
Click to collapse
I flashed without battery too,but it doesnt work :crying:
should i format + flash in SP tool?
harsh300684 said:
I flashed without battery too,but it doesnt work :crying:
should i format + flash in SP tool?
Click to expand...
Click to collapse
can you get into recovery mode?
Sam Solomon said:
can you get into recovery mode?
Click to expand...
Click to collapse
Nop even recovery mode not accessible,i am only getting first message of "getting ride for fun etc etc " and after than black screen.
harsh300684 said:
Nop even recovery mode not accessible,i am only getting first message of "getting ride for fun etc etc " and after than black screen.
Click to expand...
Click to collapse
Phone isnt hard bricked... you should be able to get it back with successful flashing itself.... Try format + DOwnload method
Sam Solomon said:
Phone isnt hard bricked... you should be able to get it back with successful flashing itself.... Try format + DOwnload method
Click to expand...
Click to collapse
sir when i connect my phone to sp tool at the bottom it doesn't show any sign of connected ... and how i know that my phone is connected and the sp tool are downloading the data.... it just showing USB : DA Download all (high speed, auto detect) plz sir help me please iam in very big trouble
help here please.. i seem to be stuck in bootloop after installing fonts from hifonts...
can you instruct me how to get this working??
custom roms?? any one??
kdhupar0 said:
help here please.. i seem to be stuck in bootloop after installing fonts from hifonts...
can you instruct me how to get this working??
Click to expand...
Click to collapse
Android Tweaker 2 works on the phone. There is an option in it for fonts. Try Installing it!
i will try to help people who has coolpad f1 8297w i will try to give a solution about root roms and somes files
i am not respond for any damage in your phones
HOW TO ROOT IT :
flash Coolpad-F1-root (wcdma).zip with stock recovery
RECOVERY (i prefer cwm)
1.put the recovery.img in root of sdcard
2.download mobileungle tools open it hit recovery update and flash the first recovery
ROM: take a look here http://www.needrom.com/phone-roms/coolpad/8297-f1/
i prefer that one http://www.needrom.com/mobile/coolpad-f1-8297w-pure-aosp/
i couldnt install that one http://www.needrom.com/mobile/coolpad-f1-8297w-aosp/ i had bootloop problems
install the rom that you want from custom recovery. do what the dev of the rom say
UNBRICK QUIDE
1 DOWNLOAD https://drive.google.com/folderview?id=0B4huyVgvdssGay16ZXgyaEJGWkE&usp=sharing FILES OWNED MOCADO
2 INSTALL COOLPAD DRIVER AND COOLPAD ASSISTANCE.EXE IN YOUR WINDOWS PC
3 PUT PHONE IN FASTBOOT MODE PUT VOLUME + VOLUME - AND ON OFF BUTTON TOGETHER
4 OPEN COOLPAD ASSISTANCE CHOOSE THE 4.2.020.P0.140409.8297W.CPB AND HIT START
5 WAIT PHONE TO START
LOGOS & BOOT ANIMATIONS (MADE BY ME)
FIRST SCREEN (LOGO.BIN) :
FLASH THE UPDATE.ZIP FROM CUSTOM RECOVERY
PREVIEW
View attachment 2803475
BOOT ANIMATION & SHUTDOWN ANIMATION:
1.DOWNLOAD ROOT BROWSER FROM GOOGLE PLAY GO TO SYSTEM/ MEDIA
2.COPY AND REPLACE BOOT ANIMATION & SHUTDOWN ANIMATION
3. SET PERMISIONS RW-R-R
4. RESTART
PREVIEW
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
BOOT LOGO:
1.EXACT BOOT_LOGO.RAR
2.WITH ROOT BROWSER GO TO SYSTEM/MEDIA/IMAGES
3. REPLACE THA BOOT_LOGO
4. SET PERMITIONS RW-R-R
PREVIEW
i hope to help sorry for bad english. everyone is welcome to help us make a good quide for that phone
Thanks sokolataki.
I will try to replace all with yours.
One other thing.
I use the lewa OS v5. You know how is possible to activate the unlocking with the volume buttons?
I have not try gravitybox yet. I m not sure if is working in Lewa. You know one other way?
In order to unlock with volumes button you need custom kernel . But we can't have. If you want these. Is a lot of apps that help you unlock with sensor of top of your device
from thl w200s cm11
But in MIUI this is possible, exist like option somewhere at the settings.
On the other hand, the apps which they work with the sensor, they will consume battery.
I will try with gravitybox.
I don't know about miui . I never use I had try with gravityBOX but didn't work
from thl w200s cm11
Great post, thanks alot!
What rom do you recommend on? I would like to flash a good rom.. Just got my F1
SABman12 said:
Great post, thanks alot!
What rom do you recommend on? I would like to flash a good rom.. Just got my F1
Click to expand...
Click to collapse
Read the port carefully I say what Rom I use
hi . I Tried tihs tutorial. but my phone only restart ! what can i do ?
How can I set up on my Phone recovery ?
my phone don`t go to the recovery ! i put down volum+ and power . if this phone go to the recovery i can fix that
please help
In order to put your phone in recovery mode you must press power + volume down then choose recovery mode
from thl w200s cm11
arya00 said:
hi . I Tried tihs tutorial. but my phone only restart ! what can i do ?
How can I set up on my Phone recovery ?
my phone don`t go to the recovery ! i put down volum+ and power . if this phone go to the recovery i can fix that
please help
Click to expand...
Click to collapse
did you solve the problem?
Hi sokolataki - thanks a lot for that guide and links.
The instructions were very clear and helped me to get back to stock 020 easily using Windows 7 SP1 64 bit.
@dalyer So you are everywhere
borsosg said:
@dalyer So you are everywhere
Click to expand...
Click to collapse
:laugh:
dalyer said:
Hi sokolataki - thanks a lot for that guide and links.
The instructions were very clear and helped me to get back to stock 020 easily using Windows 7 SP1 64 bit.
Click to expand...
Click to collapse
Thanks you if you need any help tell it to me
from thl w200s cm11
sokolataki said:
Thanks you if you need any help tell it to me
from thl w200s cm11
Click to expand...
Click to collapse
In case it's of any interest to anybody here there are a couple of useful Coolpad F1 threads over on MoDaCo...
http://www.modaco.com/topic/372543-coolpad-f1-8297w-review-info-software-custom-roms/
http://www.modaco.com/topic/371968-coolpad-f1-8297w/
I've linked to this thread over there - hope that's OK.
dalyer said:
In case it's of any interest to anybody here there are a couple of useful Coolpad F1 threads over on MoDaCo...
http://www.modaco.com/topic/372543-coolpad-f1-8297w-review-info-software-custom-roms/
http://www.modaco.com/topic/371968-coolpad-f1-8297w/
I've linked to this thread over there - hope that's OK.
Click to expand...
Click to collapse
I agree with you as I say in post files owned to modaco. I try in my post to make easiest way to build the phone
from thl w200s cm11
How is Gps and battery on this Phone?
I found this phone today on several webshops. Also there are many custom roms. So it is an interesting phone. I want to know how is GPS? How many seconds before have strong GPS signal? How is battery with moderate use? How is build quality and sound?
Thanks for your time.
Gps and wifi are very good
The gps is caught fast... But better you can use it on your car!
I record a track and it was almost on the road when you see it on google earth.
I think on (my) moderate use you can have 2 days.
For chinese phone... Is well build
In call sound is fine
I use aosp rom
ftomas said:
Gps and wifi are very good
The gps is caught fast... But better you can use it on your car!
I record a track and it was almost on the road when you see it on google earth.
I think on (my) moderate use you can have 2 days.
For chinese phone... Is well build
In call sound is fine
I use aosp rom
Click to expand...
Click to collapse
What AOSP rom? Where can i find link or website to download?
I want to use GPS in the car for navigation in combination witg Igo. Is GPS good enough?
ydur1 said:
What AOSP rom? Where can i find link or website to download?
I want to use GPS in the car for navigation in combination witg Igo. Is GPS good enough?
Click to expand...
Click to collapse
AOSP - Android Open Source Project
like virgin android without customizations
go to needrom website, then coolpad then 8297 - F1, i use the third (3ª) (i think i can't post links...)
I use meo drive from play and tomtom and worked fine also used my tracks from goolge and worked fine.
meo drive is a portuguese free car navigation from market (in portugal the portuguese map is free)
Here i am making this Thread for help (micromax canvas tab p702) users
it's a mtk 6735 device, with resolution of (600x1024) with 159 dpi.... based on android 5.1
here is how i rooted this device
i rooted it by using kingroot app
link is here
https://drive.google.com/open?id=0B4dBCvr2zZaAOWI5cVRtbG5mbEE
just turn on the net and run the kingroot app in your tab .. totally safe.
here is stock recovery link for micromax canves p702
https://drive.google.com/open?id=0B4dBCvr2zZaAUlB6XzlzalZyak0
I also ported custum TWRP recovery AND PERSONALLY CHECKED .. but our bad luck that (touch is not working in twrp recovery but it's (working fine by using otg Mouse)) i checked and ported 2 different version but same problem.. i searched solution for the problem but that need resource released by mtk
here are the link for twrp
twrp black
https://drive.google.com/open?id=0B4dBCvr2zZaAWVAzN3c5NmFKbDQ
twrp blue
https://drive.google.com/open?id=0B4dBCvr2zZaATlhycFBjTzBDV2c
just rename any one of these recovery.img and flash it by ( flashify app ) available on play store
STEPS TO FLASH RECOVERY in Tab
First Root Your Tablet Through Kingroot App
Download Flashify App
Open It And Grant Root Access
Select Flash Recovery Option
Choose recovery.img File
Wait For It To Be Flash
done
Now let's go on the firmware part
You can use your firmware for (unbricking / formating / and for stock rom)
you can use firmware in (bootloop / rom error / system file damage / system ui stopped or even set dead) conditions
Just upgrade firmware by using sp flash tool
here are the link(with the procedure of how to use firmware) of firmware for [ mmx canvas tab p702 ]
https://firmwarefile.com/micromax-p702
Also if you wanna use firmware , download
Vcom driver
https://drive.google.com/file/d/0Bziqh7RXsn-DZ3lOVGEwbXRhb1E/view
&
Sp flash tool in your pc first
Good luck
hope this all gonna help You, if you are using MICROMAX CANVAS TAB P 702
press thanks if it helped :fingers-crossed:
use these things only if you know how to use ..
I am not responsible for any circumstances ..
Special thanks to -
Xda guides
My friend Anurag
Team iris
Our facebook group link
https://m.facebook.com/groups/1090567621028394?refid=18&__tn__=C-R
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Ss with Twicked status bar and recent app now
also i wanna say, i checked them all personally and every thing working in the post..
any quarries .... please ask
happy to help
Isn't TWRP working with the volume keys? Gonna try it now! Thanks for the amazing work!
No bro twrp does not work with volume key ..
You have to use mouse with your otg .
shailesh178 said:
No bro twrp does not work with volume key ..
You have to use mouse with your otg .
Click to expand...
Click to collapse
Looks like I will have to wait for a fully functional TWRP. Can you?
Or I could try porting it myself:laugh:
Nikhilkumar038 said:
Looks like I will have to wait for a fully functional TWRP. Can you?
Or I could try porting it myself:laugh:
Click to expand...
Click to collapse
I tried approx 3 different versions .. but may be it's problem of our tab's sources .. also no recoveries available for same chipset (tablet) ..
That's why i am helpless
Also not getting solution for recovery touch problem online..
I ported recovery for some other devices and that's working fine..
So it's not a fault.
shailesh178 said:
I tried approx 3 different versions .. but may be it's problem of our tab's resource.. also no recoveries available for same chipset (tablet) ..
That's why i am helpless
Also not getting solution for recovery touch problem online..
I ported recovery for some other devices and that's working fine..
So it's not a fault.
Click to expand...
Click to collapse
You mean Source? I still wanna try porting it myself:laugh:
Nikhilkumar038 said:
You mean Source? I still wanna try porting it myself:laugh:
Click to expand...
Click to collapse
Good luck bro for success.. :fingers-crossed:
I am also waiting..
shailesh178 said:
Good luck bro for success.. :fingers-crossed:
I am also waiting..
Click to expand...
Click to collapse
I tried porting TWRP for Intex Aqua Ace(MT6735), but with no luck
I'll try tomorrow with another one
Nikhilkumar038 said:
I tried porting TWRP for Intex Aqua Ace(MT6735), but with no luck
I'll try tomorrow with another one
Click to expand...
Click to collapse
What problem you faced..?
I tried with miezu m2 & a Panasonic device and another device (i missed the name)
shailesh178 said:
What problem you faced..?
I tried with miezu m2 & a Panasonic device and another device (i missed the name)
Click to expand...
Click to collapse
I don't exactly remember what the error was. It came during compilation.
Maybe because I could not find kernel file in split_img? What about you?
Nikhilkumar038 said:
I don't exactly remember what the error was. It came during compilation.
Maybe because I could not find kernel file in split_img? What about you?
Click to expand...
Click to collapse
Mine was correctly compiled everytime .. use carliv image kitchen.
shailesh178 said:
Mine was correctly compiled everytime .. use carliv image kitchen.
Click to expand...
Click to collapse
What tool you used?
Nikhilkumar038 said:
What tool you used?
Click to expand...
Click to collapse
As i said .. i used 'carliv image kitchen for decompile and recompile'
shailesh178 said:
As i said .. i used 'carliv image kitchen for decompile and recompile'
Click to expand...
Click to collapse
And what method for porting?
Nikhilkumar038 said:
And what method for porting?
Click to expand...
Click to collapse
Just google it 'how to port twrp recovery by using carliv image kitchen' you will get many tutorial.,
Actually its total 7 file transfer from stock to port 2 from main and 5 from stock split_img to port split_img
shailesh178 said:
Just google it 'how to port twrp recovery by using carliv image kitchen' you will get many tutorial.,
Actually its total 7 file transfer from stock to port 2 from main and 5 from stock split_img to port split_img
Click to expand...
Click to collapse
Oh, I remember now. I actually used it to port a boot image.
---------- Post added at 01:12 PM ---------- Previous post was at 12:55 PM ----------
Hey @shailesh178 , Could you try using "Easy Magic TWRP Installer for MTK Devices"? Its much easier, and is reported working several times.
I tried that, but not working..
,, btw i have taken full backup today using twrp by mouse (mouse working perfect in landscape mode view) .. working great.
Woah! There are so many devices using the same SOC! Check out here man!
http://en.wikipedia.org/wiki/List_of_devices_using_Mediatek_SoCs#MT6735
Nikhilkumar038 said:
Woah! There are so many devices using the same SOC! Check out here man!
http://en.wikipedia.org/wiki/List_of_devices_using_Mediatek_SoCs#MT6735
Click to expand...
Click to collapse
If you get any tablet with same chipset, with working twrp .. please inform :good: