Database Info

[Q] Mod for my HCL ME Y2 tablet

Hi, I've recently bought HCL ME Y2 tablet. I rooted the device and the device was normal after the root. But after some days, I found my device struck with the Logo screen (ME). But I still can access the recovery mode by pressing '+' key while pressing the power button. I wiped the cache, data/factory reset. But still I'm not able to boot into my device.
I tried googling to get the update.zip image for my Tab, but no luck.
So, I decided to install Modded version into my Tab. But as I'm new to the these tasks, I require your (expert's) opinion on choosing the right mod for my device. I'd like to install Jellybean on my device.
The configuration of my tablet is as follows :
1 Ghz Cortex A9
Mali 400 Graphics processor
7 inch 1024 * 600 Multi-touch IPS panel
2 Cameras (0.3MP- Front, 2MP -Back)
8GB Internal (I guess it has 8GB Card inside it which I cant remove)
Expandable upto 32GB through External slot
1080p Full HD Playback
Inbuilt 3G HSDPA SIM Slot
Bluetooth with A2DP
Wifi b/g/n
It has Mini HDMI port, Mini USB port along with Micro SD slot.
4000mAH battery.
Please help me choosing the right Mod !!

As far as I know nobody has ported a rom to y2 so I don't really know how you will install a moded rom?? for your problem go to the service center. By the way has anyone installed google play???

Thanks
mclarenmercedes said:
As far as I know nobody has ported a rom to y2 so I don't really know how you will install a moded rom?? for your problem go to the service center. By the way has anyone installed google play???
Click to expand...
Click to collapse
I've installed Play after rooting my device. It was working fine but after installing some more apps, my Tab suddenly switched OFF and was not able to boot in again.

Anybody owns a HCL Me Y2 ????
It'd be really grateful if somebody using HCL ME Y2 uploads their backed up ROM for me !!!!
I'm out of all other options here !!! Plz somebody HELP !

same kind of thing has happend to me as well now. it doesnt go beyond me logo
Sent from my U20i using xda app-developers app

dude try this http://hclmetab.blogspot.in/2012/11/hcl-me-y2-original-rom.html download the rom and follow the steps exactly!!!....WOrked for me

Official Firmware for HCL Me Y2
Official firmware of HCL ME Y2 now can be downloaded from this official site...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Thanks for responding Riju
Riju95 said:
Official firmware of HCL ME Y2 now can be downloaded from this official site...
View attachment 2208922
Click to expand...
Click to collapse
Thanks Rijo for letting me know that HCL provides the ROM officially. Unfortunately I'm not able to enter my recovery mode.
I've posted the problem http://forum.xda-developers.com/showthread.php?t=2407156 in this thread.
I've tried everything else. Tab does not get detected by the HCL's software to download/upgrade the ROM.
Code:
adb shell
not working as well. I don't have fastboot drivers too. I think my tab got bricked. Check the post from the above link and tell me if I've some options left to try. Thanks in advance.

Final solution, I can ensure you this will work...
Brother, beleve me, you dont need any adb or fastboot commands to solve this problem. Our device don't have fastboot drivers.
Just download the official firmware from this link http://www.hclsupportservice.in/hclsupportservice.in/DriversDisplay.jsp?val=VGFibGV0&prodC=SENMIE1FIFRhYmxldA==&prodM=Y2
Extract the Y2_image.rar file on you PC by winrar. You will get four files named
1) factory_update_param.aml , 2) u-boot-aml-ucl.bin , 3) uImage_recovery ,4) update.zip
Click to expand...
Click to collapse
Now format a sdcrad (Minimum of 1 GB) to FAT32 and place all the 4 extracted files in it. DON'T CHANGE ANY FILE NAME. DON'T EXTRACT update.zip.
Then press Volume(-) key and power key. You device will take some time while upgradation process. After that your Y2 will reboot automatically. And your problem will be solved...
PS- Every Y2 tab have this boot freeze bug. This is the only way to fix it. The problem may occur again, in that case follow these instruction again.
IF YOU WANT PLAY STORE AND OTHER GAPPS IN YOUR Y2, THEN NOTIFY ME, I'LL UPLOAD A ROM WITH GOOGLE APPS.
Click to expand...
Click to collapse
PLEASE HIT THE THANKS BUTTON IF IT HELPS... :highfive:

Thanks a lot dude! Brought my tab alive again!
Riju95 said:
Brother, beleve me, you dont need any adb or fastboot commands to solve this problem. Our device don't have fastboot drivers.
Just download the official firmware from this link http://www.hclsupportservice.in/hclsupportservice.in/DriversDisplay.jsp?val=VGFibGV0&prodC=SENMIE1FIFRhYmxldA==&prodM=Y2
Extract the Y2_image.rar file on you PC by winrar. You will get four files named
Now format a sdcrad (Minimum of 1 GB) to FAT32 and place all the 4 extracted files in it. DON'T CHANGE ANY FILE NAME. DON'T EXTRACT update.zip.
Then press Volume(-) key and power key. You device will take some time while upgradation process. After that your Y2 will reboot automatically. And your problem will be solved...
PS- Every Y2 tab have this boot freeze bug. This is the only way to fix it. The problem may occur again, in that case follow these instruction again.
PLEASE HIT THE THANKS BUTTON IF IT HELPS... :highfive:
Click to expand...
Click to collapse
Thanks a lot dude! I was finally able to boot into my tablet after following your steps precisely. I've not used my tablet for almost a year because of this. And HCL has not at all supported my tablet. I'm excited I just wanted to
Code:
>>>Thanks a looooooooooooooooottttttttttttt * 10000

You are welcome bro.…
wizardvenkat said:
Thanks a lot dude! I was finally able to boot into my tablet after following your steps precisely. I've not used my tablet for almost a year because of this. And HCL has not at all supported my tablet. I'm excited I just wanted to
Code:
>>>Thanks a looooooooooooooooottttttttttttt * 10000
Click to expand...
Click to collapse
You are most welcome brother.... PM me if you have amy problem bro... I'll do my best to help you... :highfive:
HCL has the worst after sale service i've ever seen. They don't even know how to talk to customers. Their products are worse than the cheap chinese stuffs. Never ever buy anything from HCL.
You can press the thanks button if you want to thank. It really helps.... :laugh:

hcl me tablet
I cnt download dis rom from d site....its saying page error.pls help

Alternative download link
Nwachidon said:
I cnt download dis rom from d site....its saying page error.pls help
Click to expand...
Click to collapse
The official link from HCL works fine for me. What exactly is your problem with the download? If that cannot be resolved, try this alternative link http://www.sendspace.com/filegroup/alUctk9m4%2BcScTIvrjxMjA

hcl y2 booting problem
Nwachidon said:
I cnt download dis rom from d site....its saying page error.pls help
Click to expand...
Click to collapse
Dear Nwachidon,
Is your problem solved?

wizardvenkat said:
Thanks a lot dude! I was finally able to boot into my tablet after following your steps precisely. I've not used my tablet for almost a year because of this. And HCL has not at all supported my tablet. I'm excited I just wanted to
Code:
>>>Thanks a looooooooooooooooottttttttttttt * 10000
Click to expand...
Click to collapse
Y-DROID v2.0 Released Y-DROID v2.0​
http://forum.xda-developers.com/showthread.php?t=2500416

Riju95 said:
Y-DROID v2.0 Released Y-DROID v2.0​
http://forum.xda-developers.com/showthread.php?t=2500416
Click to expand...
Click to collapse
Thanks a lot dude! I'll definitely try it and comment on that thread.

All HCL Stock firmwares can be found Here :
http://forum.xda-developers.com/showthread.php?t=2527771
Press thanxx if helped

HCL ME Y2 Booting error
Dear Mr. Riju thanks for your information, I have installed and it worked for 1 day only and the next day noticed same problem, it didnt work ...would please help me please.
thanks

[4.1][ROOT][CWM] How to root Micromax Canvas Doodle i.e Micromax A111 + CWM

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Canvas Doodle [A111] is an amazing device except for low ram ie 512 MB.
The Features of the phone are bellow:
KEY FEATURES:
1.2 GHz quad-core processor,
Adreno 203 GPU,
512 MB of RAM,
4 GB of internal storage
Huge 5.3 inches TFT display with FWVGA i.e. 480 x 854 pixels resolution @185 ppi pixel density
Android v4.1.2 (Jelly Bean) OS
8 MP AF camera with HD recording,
2 MP front camera with VGA recording
2100 mAh battery
Dual SIM support
Free Stylus
Evernote & Skitch apps preloaded
How to Root :
1. Download the apk from the link bellow.
2. Instal .
3. Open and select Gandalf exploit.
4. Root .
After you get a success message. Reboot and enjoy
http://www.4shared.com/android/hcrT1ki2/Framaroot-142.html
Gud news CWM successfully ported
http://forum.xda-developers.com/showthread.php?t=2501763
Custom Rom coming soon
And for those where framaroot didn't work use Vroot
http://forum.xda-developers.com/showthread.php?t=2434453
Some other guy found this new way I just updated this thread .
Instruction:
1. Download the rooting application. (This app
can root many other devices )
2. Install the app. This is a Chinese app so I will
guide you.
3. Start VROOT and root now!
4. Now we need to install SuperSU from play
store to replace the Chinese root manager called
授权管理 1.0.4.
5. Go to play store and install SuperSU.
6. Start SuperSU and you will be asked for
permission by 授权管理 1.0.4, choose 允许
(means allow). (Should be the right side option.)
7. SuperSU will prompt to install SU binary, go
ahead with OK and it will display successful.
8. Now, freeze 授权管理 1.0.4 in titanium
backup, just in case you need it again.
Note: If you uninstall straight away from app
manager, you need to make sure SuperSU
updated the binary.
9. Re-run SuperSU to make sure everything is
alright. You will be prompt again to install SU
binary, just do what it asked.
10. After that, you are rooted with SuperSU and
授权管理 1.0.4 will not be there anymore
Sent from my GT-S7500 using xda app-developers app

framaroot not working
hi,
i have tried all the version of the framaroot with both option but nothing works. i am using windows 8 64 bit and i have also tried all usb drvier provided by micromax but unable to use as usb device [adb interface]. i am waiting for your custom rom it will be great if you make like suvi rom for canvas.

cadcare said:
hi,
i have tried all the version of the framaroot with both option but nothing works. i am using windows 8 64 bit and i have also tried all usb drvier provided by micromax but unable to use as usb device [adb interface]. i am waiting for your custom rom it will be great if you make like suvi rom for canvas.
Click to expand...
Click to collapse
this version I have tested on my device and 2 more and it worked. It should. Give me the link 2 suvi rom and I will port it. and please click thanks if it works ..

suvi link
DayanGts7500 said:
this version I have tested on my device and 2 more and it worked. It should. Give me the link 2 suvi rom and I will port it. and please click thanks if it works ..
Click to expand...
Click to collapse
this is the link for suvi rom >http://forum.xda-developers.com/showthread.php?t=2142284
let me know which firmware are you using in canvas doodle. mine is Micromax_A111_V01_130614
when i purchase doodle , framaroot worked . but after upgrading this firmware framaroot not working.

cadcare said:
this is the link for suvi rom >http://forum.xda-developers.com/showthread.php?t=2142284
let me know which firmware are you using in canvas doodle. mine is Micromax_A111_V01_130614
when i purchase doodle , framaroot worked . but after upgrading this firmware framaroot not working.
Click to expand...
Click to collapse
mine is the old one i didn't updated . ok i will try to root the updated one

custom rom
DayanGts7500 said:
mine is the old one i didn't updated . ok i will try to root the updated one
Click to expand...
Click to collapse
i am waiting for your custom rom.please let me know your usb driver provided by micromax works in windows 8 64bit. mine is not working . have you tried the root software Bin4ry_v17 ? i want to try this one but phone should be attached with usb cable with driver installed.

Awesome
Hi DayanGts7500, Yup this version of Farmaroot works with MM Doodle i rooted my Friend's Phone

cadcare said:
i am waiting for your custom rom.please let me know your usb driver provided by micromax works in windows 8 64bit. mine is not working . have you tried the root software Bin4ry_v17 ? i want to try this one but phone should be attached with usb cable with driver installed.
Click to expand...
Click to collapse
no it doesn't work . no i have not tried bin4ry_v17 .
then instal adb drivers. those drivers should work

adb driver also not working
i have also tried adb driver but not working. i have tried in windows 7 and 8 both 32 & 64 bit.

My google chrome and framaroot is not working
i have repaired my phone

Increase ram
i want to increase ram of my canvas doodle
can i do without root ? if not
tell me how to ......
thanks in advance
---------- Post added at 12:51 PM ---------- Previous post was at 12:46 PM ----------
hello
can u tell me
i am also using mm doodle i need to increase without disturbing phone software
and how to use it

chinmaysharma said:
i rooted my successfully and i installed busybox also but after some time i wanted to unroot my phone so i did it by using framaroot after then i tried using google chrome which was preinstalled on my micromax canvas a111 it says "critical functionality required for google chrome not available. maybe your application is not installed correctly or not supported with this version of android" and when i use framaroot it says "half success read only system try local.prop trick reboot and use adb". please help . can anybody help me by giving a nandroid backup of his factory resetted phone . please:crying:
Click to expand...
Click to collapse
I think you should mount your system using abd but I don't know how to do it . and also lock the bootloader . Google for it . also there a app for window ultimate android toolbox use this . its on xda. or instal chain fire su . root app and then unroot from it

Rishabh14 said:
i want to increase ram of my canvas doodle
can i do without root ? if not
tell me how to ......
thanks in advance
---------- Post added at 12:51 PM ---------- Previous post was at 12:46 PM ----------
hello
can u tell me
i am also using mm doodle i need to increase without disturbing phone software
and how to use it
Click to expand...
Click to collapse
Sorry But no you can't. there's two ways after root swap and a custom kernal. for swap download the app swapper but, it will decrease the life of your external sd.

tricks
ok can u tell me tricks of canvas doodle

Rishabh14 said:
ok can u tell me tricks of canvas doodle
Click to expand...
Click to collapse
what kind of tricks

how to upgrade firmware of micromax doodle
cadcare said:
this is the link for suvi rom >http://forum.xda-developers.com/showthread.php?t=2142284
let me know which firmware are you using in canvas doodle. mine is Micromax_A111_V01_130614
when i purchase doodle , framaroot worked . but after upgrading this firmware framaroot not working.
Click to expand...
Click to collapse
how did you did that.. i do wana upgrade my firmware !!

=))
Haha, Anyone sucess?
Stupid method...

latest firmware upgrade.zip
download the firmware from this link
http://www.moulnisky.com/index.php?dir=Micromax/A111/V3_19062013/Micromax_A111_SNS_0614/
put the update.zip file in your formatted sd card. shutdown phone and restart phone with volume up and power button both till the canvas logo comes on the screen. then it will install software itself. wait for 5 minute your phone will be ready with new firmware.

cadcare said:
download the firmware from this link
http://www.moulnisky.com/index.php?dir=Micromax/A111/V3_19062013/Micromax_A111_SNS_0614/
put the update.zip file in your formatted sd card. shutdown phone and restart phone with volume up and power button both till the canvas logo comes on the screen. then it will install software itself. wait for 5 minute your phone will be ready with new firmware.
Click to expand...
Click to collapse
Thus root work with this firmware

like enhance my camera how to install ram

Micromax Canvas Blaze MT500 Stock ROM Official

Here is the Micromax Canvas Blaze MT500 Official Stock Firmware/Rom :
Link : https://www.adrive.com/public/eB7Z4..._MMX_EMCP_SD5DH26A_4G_2013-11-01(Express).rar
Micromax Canvas Blaze MT500, The first Micromax CDMA + GSM Smartphone, Canvas Blaze is built keeping in mind your love for blazing Internet speeds.
It has a powerful 1 GHz Snapdragon S4 Dual Core processor, an impressive 12.7 cm (5) screen, powered by an immensely long-lasting 1850 mAh battery.
Android 4.1.2 Jelly Bean
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
How to Flash/Upgrade :?
Download : Software Upgrade tool
Download : Drivers
A. Remove SIM card & TF card, also please backup files in handset.
B. Install USB driver.
C. Power on handset firstly, and then connect handset with PC, there
will show COM port of “Diagnostics 9025”(or “DIAG 9025”).
Start software download guide:
1. Click “QCOM_MultiDnload_ENU.exe” to open SW download tool.
2. Port Mode: select the COM port which shows in device manager.
3. Software Version: press Software Version button, select the SW
version you want to upgrade, and then click OK button.
4. When you click “OK” button, it will check MD5 value automatically,
when finish checking, it will prompt you to click “Start All” or “Start”
button to upgrade SW version.
5. “Open Device Manager”>> COM & LPT, to get the COM port number
on your PC, and select the concordant one on the home interface of
the tool.
6. After select Software Version, Port Mode and COM port number then
press “Start All” or “Start” button to download software.
7. Upgrade tool will connect handset firstly, then switch to download
mode.
8. And download ROM of handset.
9. Finish upgrading software.
?? Still confused, The software upgrade guide is included with screenshot along with the Software upgrade Tool.
In case after upgrading you find endless searching for service or no service then here is the MT500 MMX NVTool.
What is NV and what is NV Tool ??
NV file is non volatile memory
this file store the memory with out voltage support
when u disconnect the battery , and put it again the time of the cell changed , TIME need continuous voltages
but when u remove the battery set security code not changed .. mean it dont require voltages
in NV such memories are saved which dont require voltages like:
Security Code
Network Code
Profile Setting
Network Calibration
Incoming / Outgoing Call Records
Contacts
In Samsung this file called EEPROM (electronically erasable programmable read only memory)
In Nokia this file called PM (Permanent memory)
In LG its called NVM (non voltile memory)
Again the Guide to Change MMX NV is available with screenshot within the MT500 MMX NVTool.
Try Framaroot by xda member alephzain to root this phone.
1. Enable USB Debugging. Then Download FramaRoot.apk from the above mentioned thread.
2. Install, and open the app.
3. Select Install SuperSU from the drop down menu.
4.Click on Gandalf option.
It should now root the phone and install supersu app. Restart your phone and your phone should be rooted. If the Framaroot crash try it a couple of times it should root your device.
If the app works do not forget to appreciate the the developer of Framaroot.
And now as always : Use this at Your own Peril. I will not take any responsibility on whatever may happen with your Micromax Canvas Blaze.

mt 500 bricked after update
i tried with sptools and the phone got restored thanks eveyone
i tried to upgrade my mt 500 mts canvas blaze with mt500 stock rom official, the process were correct and success but now phone is dead please help

anyone please hel me to root canvas blaze mt500
thanks in advance

rishialpy said:
i tried with sptools and the phone got restored thanks eveyone
i tried to upgrade my mt 500 mts canvas blaze with mt500 stock rom official, the process were correct and success but now phone is dead please help
Click to expand...
Click to collapse
Now your phone is OK or bricked. You mean this procedure is no good.
Sent from my MT500 using XDA Premium 4 mobile app

Heyi OP any way to unlock network lock so that other CDMA Network can also be used other than MTS
Sent From My Sony M Dual C2004

dsmas said:
Now your phone is OK or bricked. You mean this procedure is no good.
Sent from my MT500 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
@dsmas now my fone is ok after instalation the root was sucess
rishi

SArnab©® said:
Heyi OP any way to unlock network lock so that other CDMA Network can also be used other than MTS
Sent From My Sony M Dual C2004
Click to expand...
Click to collapse
No. Will share if I come to know of any working method.. :fingers-crossed:

Hello Developers. Can someone of you develop custom roms for Blaze MT500.

deleted.

rishialpy said:
i tried with sptools and the phone got restored thanks eveyone
i tried to upgrade my mt 500 mts canvas blaze with mt500 stock rom official, the process were correct and success but now phone is dead please help
Click to expand...
Click to collapse
Will you please detail out your success story.
In SP tools which file you selected? thanks in advance.

The Rooting method is Already there in the OP :
rishialpy said:
anyone please hel me to root canvas blaze mt500
thanks in advance
Click to expand...
Click to collapse
The Rooting method is Already there in the OP :angel:
Cheerss :good:

Dear @ rishialpy. Would you please guide how you were able to flash stock rom. Thanks.

Dear OP, Hi. Have you got any comment on the following partial post. Thanks. Bcoz, I going to flash and I request your confirmation before proceeding.
rishialpy said:
i tried to upgrade my mt 500 mts canvas blaze with mt500 stock rom official, the process were correct and success but now phone is dead please help
Click to expand...
Click to collapse

Can someone please provide me CONTACTS file for MT500. Thanks.

@ rishialpy, may I once again ask you , how you were able to flash this stock rom? Thanks.

dsmas said:
Dear OP, Hi. Have you got any comment on the following partial post. Thanks. Bcoz, I going to flash and I request your confirmation before proceeding.
Click to expand...
Click to collapse
Follow the instruction given in the OP.. SP tools is for Mtk device this is a Qualcomm device...

Great Great Success. @ MKG Thank you, Thank you very much Million times. :good::good::good::good::good
PS. I would have done this earlier, only if rishialpy did not confuse / misguide: Very Sad.

Welcome
dsmas said:
Great Great Success. @ MKG Thank you, Thank you very much Million times. :good::good::good::good::good
PS. I would have done this earlier, only if rishialpy did not confuse / misguide: Very Sad.
Click to expand...
Click to collapse
u Welcome !! .. I hav no Idea hw he came up with the Sp tools stuff, Guess he just saw that it's a Micromax and thought its a MTK device, and
gave a random comment.
:angel:

CDMA unlocked ?
Is this rom only for MTS,
Or can be installed on MTS MT500 and can be used for R-CDMA.
I have tested on default MT500 MTS version, only calls and sms works,
NO DATA yet.
any solution ?

I have a biggest problem plz help me to solve it.
My micromax mt500 is not working properly.It is not dead but my my play store,YouTube etc and other Google apps are not working.It shows that "please update your Google services".I am annoyed now.I can't do anything.Plz someone help.

Xolo A500 Club Rom Development & Discussion

Dear people ,
Xolo again has bought us a fabulous product , I happen to get my hands on this one , Unfortunately during porting TWRP , i lost my original recovery , The purpose of creating this thread is to bring all XOLO A 500 Club owners & MTK 6572 Developers to help us bring some new development dierection to this new product .
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
GENERAL
Click to expand...
Click to collapse
2G Network GSM 900 / 1800
3G Network HSDPA 2100
SIM Dual SIM
Announced 2014, January
Status Available. Released 2014, January
MEMORY
Click to expand...
Click to collapse
Card slot microSD, up to 32 GB
Internal 4 GB, 512 MB RAM
FEATURES
Click to expand...
Click to collapse
OS Android OS, v4.2 (Jelly Bean)
Chipset Mediatek MT6572
CPU Dual-core 1.3 GHz
GPU Mali-400
Sensors Accelerometer, proximity
Radio FM radio
https://www.facebook.com/groups/a500club/ ( FaceBook Page )

prateek.maac said:
Dear people ,
Xolo again has bought us a fabulous product , I happen to get my hands on this one , Unfortunately during porting TWRP , i lost my original recovery , The purpose of creating this thread is to bring all XOLO A 500 Club owners & MTK 6572 Developers to help us bring some new development dierection to this new product .
2G Network GSM 900 / 1800
3G Network HSDPA 2100
SIM Dual SIM
Announced 2014, January
Status Available. Released 2014, January
Card slot microSD, up to 32 GB
Internal 4 GB, 512 MB RAM
OS Android OS, v4.2 (Jelly Bean)
Chipset Mediatek MT6572
CPU Dual-core 1.3 GHz
GPU Mali-400
Sensors Accelerometer, proximity
Radio FM radio
Click to expand...
Click to collapse
Bro, from where can I get the stock rom for Xolo A500 Club?

That's the problem , this phone stock rom is unavailable , i am only hoping that some link could be bought here
Sent from my A500 Club using xda app-developers app

The phone has recently got an update.
And now has messed up everything.
The main camera is clicking dark photographs even in the broad daylight.
The float window had an app killer button which is also gone.
Is there way to rollback the update?

Rollback not possible without any rom repository
keith_j_snyder2 said:
The phone has recently got an update.
And now has messed up everything.
The main camera is clicking dark photographs even in the broad daylight.
The float window had an app killer button which is also gone.
Is there way to rollback the update?
Click to expand...
Click to collapse
I agree the new rom update has problems so i had started modifying the internals but problem is how on earth do i backup the new rom without the help of any recovery for this device ;(

Ok Guys Received The Mobile Today... Have to Start Development
created fb group join... let me decide to make roms or not ... it depends on how many users it had
https://www.facebook.com/groups/a500club
My work - mtk6572 http://xolo-a500s.blogspot.in/

pra143pra said:
Ok Guys Received The Mobile Today... Have to Start Development
created fb group join... let me decide to make roms or not ... it depends on how many users it had
https://www.facebook.com/groups/a500club
My work - mtk6572 http://xolo-a500s.blogspot.in/
Click to expand...
Click to collapse
Thats great!! :good:

The phone does not gets detected by mtk droid tools..i tried 2,3 vrsions..any solution??
Sent from my Micromax A58 using xda app-developers app

daoodshah said:
The phone does not gets detected by mtk droid tools..i tried 2,3 vrsions..any solution??
Sent from my Micromax A58 using xda app-developers app
Click to expand...
Click to collapse
did u tried USB debugging On and the phone should be rooted to be used by mtk droid tools

I know these things bro..turned usb debugging on..rooted the phone..i just wanted to compile cwm..and dump the stock rom..but its nt getting detected..you can give a try if u want to check..
Sent from my Micromax A58 using xda app-developers app

daoodshah said:
I know these things bro..turned usb debugging on..rooted the phone..i just wanted to compile cwm..and dump the stock rom..but its nt getting detected..you can give a try if u want to check..
Sent from my Micromax A58 using xda app-developers app
Click to expand...
Click to collapse
have a look at this video...Might be helpful
http://www.youtube.com/results?sear...+to+make+CWM+with+a+rooted+MTK+MediaTek+phone

I knw how to compile a cwm..i have compiled it for my phone..but this phone is nt gettint detected..if it gets dtected then i can easily compile a cwm..
Sent from my Micromax A58 using xda app-developers app

CWM for A500 CLUB compiled by me
daoodshah said:
i knw how to compile a cwm..i have compiled it for my phone..but this phone is nt gettint detected..if it gets dtected then i can easily compile a cwm..
Sent from my micromax a58 using xda app-developers app
Click to expand...
Click to collapse
cwm recovery first time for a500 club mobile(tested !!! Working !!!)

Gokul HAri said:
cwm recovery first time for a500 club mobile(tested !!! Working !!!)
Click to expand...
Click to collapse
Hi.. can u give it to me?

Stock apps deleted (music player and browser)
hey bro i have lost the stock browser and music player apks from system/apps....
Can anyone post those 2 apks for me
I will be thankful to him....
Plzzz post those apks for me......

So the phone received Kitkat update and now they have integrated whatsapp and some other apps. Performance is a bit better but does anyone knows how to remove inbuilt app?
I know it requires rooting and there wont be any update coming for this phone so it's ok to root it now but can someone share the rooting procedure with kitkat update?

Hey all Xolo Club users! Do we have any update on the rooting part now?
Lets share some more details here so others can also check your development.

I got a procedure from a Facebook Xolo A500 Club group.
http://d-h.st/pbC8
I haven't tested it but others have tested it. So please take a look.

Neo M1 - Root / Recovery / Backup / Unbrick All in one by devteam.vn

Introduction :
This version on the original ROM development providers . Be backed up directly from the factory .
Already available Root and install some utilities improve as Greenify , Busybox & Xposted
China application omitted , default international language ( English )
Optimize the whole system by script .
Change Boot Logo & Animal DevTeam ^ _ ^ ( Pls not edit this)
The default apps are not updated
Bug : ? ? ? ?
Link download : GOOGLE DRIVE
ROOT GUIDE - INSTALL RECOVERY - BACKUP - unbrick​A ) ROOT PLANT :
Download and install from the link Framaroot : http://forum.xda-developers.com/apps/framaroot/root-framaroot-one-click-apk-to-root-t2130276
Running Framaroot choose the last option . detector is okie !
Want SU interface is in English, you download the MTK Droid Tool at : https://drive.google.com/folderview?id=0Bwidle8N7kRRaGwyeTFJUTl3aG8&usp=sharing
Open the program and select the backup , select option 1 and Su Su is available in 2 is okie . MTK Tool Case reports are not root , Root Normally you hit okay . SU will not have to choose anymore .
Reboot = > Done !
B ) INSTALL RECOVERY
Requires Root and follow 1of have the following:
Method 1 : Download the tool from Uncle CHplay : https://play.google.com/store/apps/details?id=com.mobileuncle.toolbox&hl=vi - Copy to the root of Recovery memory card , which is like update that's okay . Regarding the use of self- TIMI you on a lot 4r .
Method 2 : Use MTK Tool was used to Root ( also introduced in 4r )
Method 3 : Using Flash tool : Just download Recovery renamed to " recovery.img " and place in the Flash Tool folder and download the files separately . You find out in accordance with the instructions on the 4r very much for your time .
Download: CWM Recovery 5.5.0.4 and 6.0.4.4 CTR CWM Recovery 1.1 base
C ) BACKUP ROM :
This section of your reference manual MTK TOOL okay !
D ) Unbrick
Look carefully between the power button and volume have microscopic holes poked into it = > shutdown
In Recovery backup or restore is not to be the case , then it is being used FlashTool Download ( limited use Format / download )
Download the full set of tools have been tested for FT M1 : https://drive.google.com/folderview?id=0B--nMahCzv6ATjlSa0l4QXkweVU&usp=sharing
Download ROM Vietnamese , check out the latest and Edit again as introduced in the ROM section : https://drive.google.com/folderview?id=0B--nMahCzv6AN2w3RTNyRlp5VFE&usp=sharing
Download backup recovery was introduced on the edit as ROMhttps :/ / drive.google.com / FolderView ? Id = 0B - nMahCzv6AMWNrTzJaU2dCTlk & usp = sharing ( or CWM Recovery Using CTR is )
Note : These are not the alternative Unbrick anything from the original Rom !
WISH YOU SUCCESS !
Preview:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Version 1.1 by devteam:
From: http://devteam.vn/forum/rom-mod-cua...ummary-rom-neo-m1-updater/page2#ixzz32vq3Q6qI​

Updated CTR Recovery 2.2 for Neo M1: https://docs.google.com/file/d/0B--nMahCzv6Aek9DdGxpNFZVU1U/edit

upppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppp

will TWRP work on this device? also any talks of MIUI port?
Sent from my JY-G3N using Tapatalk 2

boofman said:
will TWRP work on this device? also any talks of MIUI port?
Sent from my JY-G3N using Tapatalk 2
Click to expand...
Click to collapse
http://devteam.vn/forum/rom-mod-cua...d-cores-aa/21432-rom-miui-amp-lewa-cho-neo-m1
MIUI and Lewa, sir

not yet working completely though.. development doesn't seem to be active..maybe mt6582 will just become a footnote with MTK devices..
Sent from my JY-G3N using Tapatalk 2

I can get it root it... It says success with frameroot, but nothing happens

boofman said:
not yet working completely though.. development doesn't seem to be active..maybe mt6582 will just become a footnote with MTK devices..
Sent from my JY-G3N using Tapatalk 2
Click to expand...
Click to collapse
You need root and can update twrp

razorinc said:
I can get it root it... It says success with frameroot, but nothing happens
Click to expand...
Click to collapse
Yes, all Mt86582 JB can root by Framaroot, sir

mrkimi84 said:
You need root and can update twrp
Click to expand...
Click to collapse
This is the 1st time I've used CTR and so far like it..one thing I've missed with TWRP was batch install, but it's not something you use that frequently though..
Also tried MIUI - still got issues with memory..ColorOS is actually good, but still testing it out and aside from known issues, everything seems to be stable..
Sent from my NEO_M1 using Tapatalk 2

mrkimi84 said:
Yes, all Mt86582 JB can root by Framaroot, sir
Click to expand...
Click to collapse
I can get it work... It says phone rooted, but when I restart it afterwards, nothing at all... can someone write step by step procedure. I m on official rom 1.4
What is best rom available now? official is full of bugs and problems

razorinc said:
I can get it work... It says phone rooted, but when I restart it afterwards, nothing at all... can someone write step by step procedure. I m on official rom 1.4
What is best rom available now? official is full of bugs and problems
Click to expand...
Click to collapse
I'm using ColorOS..great eyecandy..stable..no issues with Storage and google sync..only downsides: proximity and light and compass and gravity sensors don't work, front cam is bad, videos also bad..
Sent from my NEO_M1 using Tapatalk 2

I managed to root it with root genius... frameroot on offical 1.4 won t work for me. another thing is when I root it on 1.4 with root genius it gives ghost touches.
Color os is great but useless without those sensors, looking forward to new release.
I am leaving in area with low signal, is it possible ti improve it, with modem/baseband file? Or some other solution?

There isnt any update for our phone..official ones are buggy, custom ones are better, and looks like we are going to be stuck a little bit..
Camera isnt as good as it looks on paper, and a few reported problems with touch issues..personally i've issues with low speaker volumes with media and notifications/alerts..
Seems not a great phone IMO..
Sent from my NEO_M1 using Tapatalk 2

would be nice to neo mobile or someone else confirm that all those problems are rom related and when the next update will be...
big thanks for all developers trying to solve all those problems!

Neo mobile seems to be a little silent this past couple of weeks..I've never seen them respond via their official forums.
Sent from my NEO_M1 using Tapatalk 2

Any of you guys can confirm if the three little capacitive dots (back, home, menu) at the bottom of the phone have backlight? Mine doesn't seem to be lighted..

Mine also do not work... Can anybody confirm information that neomobile declared bankruptcy?

razorinc said:
Mine also do not work... Can anybody confirm information that neomobile declared bankruptcy?
Click to expand...
Click to collapse
Thanks for confirming..mine didn't work and I was thinking it was because of ColorOS..
Neomobile bankrupt? Where did you hear about it?
Sent from my NEO_M1 using Tapatalk 2

On 4pda forum... If so, we are doomed...