These kernels are for CyanogenMod 10 - Alpha 4.
The goal of these builds is to fix the issues with phone signal, which is not properly working with the stock kernel. Nothing was changes, no extra features, no nothing.
There won't be any more "development" now that the bug is fixed.
The experimental sync bug fix, as the name says, it's a new sync bug fix I was testing. It's here because it partially fixed the missing signal issue at first, but it's not the real fix.
Downloads:
kernel-cm-10-A4-signal_fix.zip: dhiru's kernel + signal fix [0001, 0002] - (previously known as V1)
kernel-cm-10-A4-signal_fix-exp.zip: experimental sync bug fix [0003, 0004] + signal fix [0001, 0002] - (previously known as V2)
kernel-cm-10-A4-restore.zip: stock alpha 4 kernel.
Note: I forgot to change the "name" of the kernel, so you'll get [email protected]_CM9. Don't worry, it's for CM10
Even though I marked V2 as experimental build and I added it as alternative choice, it's the most downloaded version.
As I reported several time ago, mobile data is maybe less stable with it and I think it's because the PDA state is controlled with early suspend instead of the regulr suspend, as it was in the old Samsung releases. In case of problems, flash V1.
If you noticed anything, please report
Source code:
android_kernel_samsung_latona at 0e84cc4896 + patches attached, applied as indicated above.
I verified that when a stock ROM is used, GPIO 126 is normally set to 0.
UPDATE
Click to expand...
Click to collapse
If you are stuck at Samsung splash screen and you are unable to reboot in recovery (I don't know why some users are facing this issue), so you are not able to flash another kernel or restore a backup, you can try to flash one of the kernels with ODIN.
Downloads:
kernel-cm-10-A4-signal_fix-ODIN.tar: dhiru's kernel + signal fix [0001, 0002] - (previously known as V1)
kernel-cm-10-A4-signal_fix-ODIN-exp.tar: experimental sync bug fix [0003, 0004] + signal fix [0001, 0002] - (previously known as V2)
kernel-cm-10-A4-restore-ODIN.tar: stock alpha 4 kernel.
Reboot in Download mode and flash as PDA.
Kernel modules are not included in the PDA. They are not necessary if you were using dhiru's CM with no custom kernels. If you are not sure, do as follows:
Flash kernel as PDA with ODIN (assuming you are stuck at Samsung splash screen and can't reboot in recovery)
Reboot in recovery (pull the battery if nothing works and use the three-keys combo)
Flash CyanogenMod 10 zip (your data will be preserved)
Flash once again kernel as PDA with ODIN
_____
Older posts:
Update: Now I know what stock ROMs use (GPIO 126 = 0). I'll soon update the kernel.
I already wrote that this won't be a custom kernel, no extra features, overclock etc. I opened this thread simply to test a fix, that's why I opened it in the general section, even though the dev section would have been more appropriate.
I'm lazy, so read this post.
kernel V1: includes only the sec_get_param_value fix
kernel V2: includes both the first change (the reworked sync bug) and the sec_get_param_value fix
Very old post:
Click to expand...
Click to collapse
As I posted in dhiru's thread, with my kernel I catch the mobile signal faster than with the stock kernel. I don't have to wait, all I have to do is to turn off and then on the screen once.
I've recently done some changes to my kernel regarding the sync bug. So, suspecting those changes are what makes the difference, I applied the same changes to dhiru's kernel and built it.
I tried to reboot few times and there's really a difference, at least for me.
I suspect that with the stock kernel there are only issues in reporting the current intensity, because 3G and calls seem to work.
Download: (Flash from recovery)
kernel-cm-10-Alpha4-TEST.zip
kernel-cm-10-Alpha4-RESTORE.zip
Source code:
android_kernel_samsung_latona at 0e84cc4896 + patch attached + unset CONFIG_SVNET_WHITELIST
I don't know if battery life is affected, if the sync bug is really gone (no issues till now) or if there are issues with this kernel (I'm not using it. I only tested it for a few minutes). Flash at your own risk.
Don't report any bug in CM10 thread if you are using this kernel. Use the restore zip first, try to reproduce the bug and then report.
Question
Hi loSconosciuto, i have one question regard alpha 4. I have problem with signal too (as i posted in alpha 4 general thread) but i think it is beacuse my modem (LUBKPD) has been overwrite to DDLE1. Is there any posibility to create a flashable zip only to overwrite my (our, for those who live in south america and has the same problem). Sorry to ask you but i do not know what to do, cause my media storage don't get recognize and i can`t back to stock rom and no one reply my question in general, my phone is practically a stone, except for that moment when get signal (sms and calls only). Thank you!
jsp1984 said:
Hi loSconosciuto, i have one question regard alpha 4. I have problem with signal too (as i posted in alpha 4 general thread) but i think it is beacuse my modem (LUBKPD) has been overwrite to DDLE1. Is there any posibility to create a flashable zip only to overwrite my (our, for those who live in south america and has the same problem). Sorry to ask you but i do not know what to do, cause my media storage don't get recognize and i can`t back to stock rom and no one reply my question in general, my phone is practically a stone, except for that moment when get signal (sms and calls only). Thank you!
Click to expand...
Click to collapse
I could, but I don't have LUBKPD modem.
All you have to do is to take modem.bin from the PDA of your ROM (as you may know, you can open it as a normal tar), copy it in /radio overwriting the existing one and reboot. Permissions will be automatically set on reboot.
If you want, here two (different) flashable zips I made for myself. You have to replace modem.bin inside of the zip with yours and then flash.
radio-cm-XXLE4-galaxysl-signed.zip (will erase /radio and then copy the modem)
radio-cm-KPU-galaxysl-noerase-signed.zip (will simply copy the modem)
Works perfectly. Thank you dear Sir :thumbup:
Sent from my GT-N8013 using xda app-developers app
Ok, I think I almost fixed the problem. sec_get_param_value is an exported symbol defined in param.ko (yeah, brilliant...), but we don't use that module anymore in alpha4. The consequence is that the function that turns on the modem is never executed completely.
It still needs some improvements. switch_sel is never set or initialized, but at least the connection is immediately enstablished now. The problem is that I'm not sure which is the best option, so I'll wait for more opinions about it.
In the meanwhile I built two new kernels:
kernel V1: includes only the sec_get_param_value fix
kernel V2: includes both the first change (the reworked sync bug) and the sec_get_param_value fix
V2 is a little bit more "experimental".
OP updated with the new patch.
__
Maybe this is not the right place for this thread, but I opened it here because there won't be any development.
I flashed the V2 and I got the signal instantly after flashing
Sent from my GT-I9003 using xda app-developers app
Thanks man it works great for me...flashed v2 and boom it turned on
Sent from my GT-I9003 using CM10 alpha4 Tapatalk 2
It works so good thank you so much I hope you will continue your very good job
Envoyé depuis mon GT-I9003 avec Tapatalk
Its working fine till now, Thanks alot!. I just wanted to say would you please add move governers in the subsequent release
This thread should be moved to development section.
So that people are aware of the fix.
And it works perfectly, thanks to losconsiuoto
Sent from my GT-I9003 using xda premium
hi
loSconosciuto said:
I'm lazy, so read this post.
kernel V1: includes only the sec_get_param_value fix
kernel V2: includes both the first change (the reworked sync bug) and the sec_get_param_value fix
As I posted in dhiru's thread, with my kernel I catch the mobile signal faster than with the stock kernel. I don't have to wait, all I have to do is to turn off and then on the screen once.
I've recently done some changes to my kernel regarding the sync bug. So, suspecting those changes are what makes the difference, I applied the same changes to dhiru's kernel and built it.
I tried to reboot few times and there's really a difference, at least for me.
I suspect that with the stock kernel there are only issues in reporting the current intensity, because 3G and calls seem to work.
Download: (Flash from recovery)
kernel-cm-10-Alpha4-TEST.zip
kernel-cm-10-Alpha4-RESTORE.zip
Source code:
android_kernel_samsung_latona at 0e84cc4896 + patch attached + unset CONFIG_SVNET_WHITELIST
I don't know if battery life is affected, if the sync bug is really gone (no issues till now) or if there are issues with this kernel (I'm not using it. I only tested it for a few minutes). Flash at your own risk.
Don't report any bug in CM10 thread if you are using this kernel. Use the restore zip first, try to reproduce the bug and then report.
Click to expand...
Click to collapse
After i flashed with the CM10 alpha 4 the first problem i found the signla problem but thanks to your great hard work it was solved so easily and that too without any errors.
Request to Moderators Please move this thread to Developement or merge this post under the CM10 alpha 4 update
Well, flashed V2 and device is stuck at the initial Samsung screen. It won't even boot into recovery. Anybody face the same? My cousin is furious right now!
spacebar2011 said:
Well, flashed V2 and device is stuck at the initial Samsung screen. It won't even boot into recovery. Anybody face the same? My cousin is furious right now!
Click to expand...
Click to collapse
first tell me which rom were u on, and did you update to cm10 alpha 4 and followed all the instructions properly as mentioned
rahul_rocks3 said:
first tell me which rom were u on, and did you update to cm10 alpha 4 and followed all the instructions properly as mentioned
Click to expand...
Click to collapse
I wrote some of the original instructions on the i9003 forums, so procedure/method is not a problem here.
I think the issue is I flashed the v2 kernel over the ParanoidAndroid latest 2.54 Alpha4 assuming that as the base is this ROM, the kernel would work. But got a soft brick. Its all fine now, had to go through the whole KPE, LF2 process and now flashing CM10 Aplha4.
If you could just tell me if replacing the modem.bin from LF4 is enough for the signal issues or do I still need to flash the V2 kernel?
Thanks in advance!
EDIT: Flashed V2 but got a 2nd soft brick. Went through the whole process again () My signal and data are working but the indicator is greyed out.
resolved problems
I had problems relating to signal strength and storage.
Thanks and its now working perfectly.
---------- Post added at 08:04 AM ---------- Previous post was at 08:03 AM ----------
rahul_rocks3 said:
After i flashed with the CM10 alpha 4 the first problem i found the signla problem but thanks to your great hard work it was solved so easily and that too without any errors.
Request to Moderators Please move this thread to Developement or merge this post under the CM10 alpha 4 update
Click to expand...
Click to collapse
+1
Flashed V2... It's working great. Thanks.
Sent from my Nexus 7 using xda premium
Thanks works like a charm.
spacebar2011 said:
Well, flashed V2 and device is stuck at the initial Samsung screen. It won't even boot into recovery. Anybody face the same? My cousin is furious right now!
Click to expand...
Click to collapse
Spacebar! How the heck are you?
Sent from my Samsung Galaxy SL on CyanogenMod 9 !
arindammanidas said:
Spacebar! How the heck are you?
Sent from my Samsung Galaxy SL on CyanogenMod 9 !
Click to expand...
Click to collapse
I'm very well mate, you? :highfive:
Just been off the radar due to a choked studio schedule. I've been somewhat active on the One X forums though.
Cousin asked me to update his SL (passed on from me) and this happened last night. I'm not sure whether to flash the v2 kernel again as signal etc is working but the icon is all grey and it takes about 15 mins after a reboot to get signal. Don't have the time to go through the entire clean flash process all over again.
spacebar2011 said:
I'm very well mate, you? :highfive:
Just been off the radar due to a choked studio schedule. I've been somewhat active on the One X forums though.
Cousin asked me to update his SL (passed on from me) and this happened last night. I'm not sure whether to flash the v2 kernel again as signal etc is working but the icon is all grey and it takes about 15 mins after a reboot to get signal. Don't have the time to go through the entire clean flash process all over again.
Click to expand...
Click to collapse
I'm doin' good!
I'm still on CM9.... but v2 seems to work for some people including loSconosciuto himself....
Sent from my Samsung Galaxy SL on CyanogenMod 9 !
Related
Gummy for the SGS4G
***Read the Changelog and Bug tracker post below***
This is a port from Team Kick Ass based on the famous ROM Gummy and our CM9.
READ THE ENTIRE OP EVERY TIME!
As always, I am not responsible for anything you do. If you do not read the OP to the fullest, you will run the risk of damaging your device.
Changelog and bug tracker is in post 2
Download links are in post 3
Please use the Q&A Thread
Thanks to:
SUPER THANKS to Jt1134
daothanhduy1996
Team Gummy
Erik
bhundven
Team Acid
Fbis251
GFXMyst for the ftp host (hopefully **** will be faster now...lol)
The guy who donated a long time ago (don't know his name), but I didn't find out until the donation was rejected automatically by paypal
My wife
**FRESH or updating to Gummy 3.0.0**Install instrcutions:
Make a backup of all your data
Install CM7
Reboot to recovery
Format /cache, /data, /system
Install Gummy 3.0.0
Install gapps
Reboot
Wait 10 minutes
Enjoy
**UPDATE**Install instrcutions:
Make a backup of all your data using TB or something alike
Download GummyMutt to sdcard
Reboot to recovery
Format /system and /cache
Wipe dalvik cache
Install GummyMutt-x.x.x.zip
Re-install Gapps (If not you may have issues...)
Fix permissions
Reboot
Wait 10 minutes
Enjoy the Gummy!
Installing the test supplemental:
Download 3.2.1 supp.zip to sdcard
Reboot to recovery
Flash
Reboot, test and report
Bug Tracker and Changelog
Bug tracker
Same issues as latest CM9
Wired tethering not working
Low and inconsistant wifi/signal (You have to flash back to CM7, flash padded modem of choice, then reinstall Gummy)
Might have excessive battery drain issue on v3.2.1 (Test supplemental has been created to verify)
You tell me more...
CHANGELOG
GummyMutt 3.2.1 milestone 2
Reformated version number for easier tracking (x.x.x= build number.milestone.fixes/minor updates)
Fixed UMS in build thanks to daothanhduy1996
Added automatic su when connected to adb (if this causes extra battery drain, I will remove it in the next build)
GummyMutt 3.0.2 Milestone 2
More Lightning Zap tweaks
Fixed loss of su/root issue
Fixed Info in about phone to reflect correct version, etc
Flashes built in modem correctly
Reverted back to KJ6 padded modem
Signal seems to be better... let me know what you guys find because I really want to close out this issue...
Please check GPS... I have again messed up my /efs and don't want to fix it atm so I can't test...lol
Gummy 3.0.0 Milestone 1
Built from source with the help of Fbis251 and Team Acid repo
New Team Fah-Q (formaly known as Team Kick Ass) kernel
Lightning Zap built directly into kernel/ROM
Camcorder is fixed
Kids love the flying poptart cat with a rainbow coming out it's butt and boot sound so it is here to stay...lol
v2.1
Changed to FBis251 KD1 padded modem
V2 NEW BUILD
Fixed dps
Fixed FFC camera
Added camera bleepy sound back in (Don't ask me to change it to something else. You want something else, you can change it)
Settings don't fc when selecting storage
Added softkeys toggle (can be turned on/off in power toggle)
Bluetooth seems to be working with audio (was off and on) Please report any issues
Added more LZ tweaks
Raised dalvik heapsize to help with mattery issues.
Changed modem to KD1 to try and fix radio issues
Can't test Phone/SMS at the moment. Please report if there is a problem.
v1.2.2
Added Angry GPS
GPS seems to be working now
Removed exchange.apk
Wifi/signal issues seem more stable now
Added some Lightning Zap goodness to help with battery/performance.
Updated to latest CM9 kernel
Fixed SU binary/superuser.apk issues
Fixed bluetooth permission issues
Fixed networkstas permission issues with new kernel
Fixed Android Version (4.0.4)... thanks chastity
Trimmed it down by about 20mb by removing many audio/video files
Default ringtone should be fixed and set to my personal favorite (if you have previously set a ringtone that is no longer included, it might not default back to the one I have set... please report back)
I have noticed, that since restoring via google, I have a several perms errors with my apps. It is not a ROM issue, but a google issue. If you want those perms restored, you can try restoring the data from a backup (not recommended) or uninstall/reinstall the app. (I'm looking into other options.)
Update to the latest Gummy bootanimation/bootsound. Let me know what you think. I will revert back to the original if everyone begins to hate it like I did after the 10th reboot...lol
Download Links
GummyMutt 3.2.1 milestone 2.5
GummyMutt 3.0.2 milestone 2
GummyMutt 3.0.0.zip
GummyMutt-2.1.zip
I am almost finished with this ROM. After I complete the kernel and make some slight changes, as well as fix UMS, I will call this ROM complete and move on to the next project.
1st and I know what this is...good job thomas
Sent from my SGH-T989 using xda app-developers app
Q&A thread created http://forum.xda-developers.com/showthread.php?t=1745598
Sent from my SGH-T959V using xda app-developers app
Download links are up folks... ENJOY!
Thomas, check your pm's. Think you might like it. You can disregard the first one. If you have any questions, you know how to reach me.
sent from within the beast
droidmyst said:
Thomas, check your pm's. Think you might like it. You can disregard the first one. If you have any questions, you know how to reach me.
sent from within the beast
Click to expand...
Click to collapse
I saw it right after the upload to SF had finished...lol
I have an update I'm working on already and will use the ftp then... Thanks man!
thomas.raines said:
The guy who donated a long time ago (don't know his name), but I didn't find out until the donation was rejected automatically by paypal
Click to expand...
Click to collapse
Think that was me for Lighting Zap. :crying:
I try to donate to every dev that helps make my phone new again.
I'll see if I can resend the original, took something like 45 days to go back to my bank account.
Anyway, great rom. have to play with it some more. Hope this ends up being the new VB-FB rom...
here's a logcat
Hey Thomas here's a logcat of the camcorder not startinf . I hope it helps.
@bot24 I got a 404 error when I tried to open it... Use pastebin.com and send me link please
thomas.raines said:
@bot24 I got a 404 error when I tried to open it... Use pastebin.com and send me link please
Click to expand...
Click to collapse
http://pastebin.com/6RrcbY3Z
here you go I still hope it helps I don't know why 404'd on you.
Thanks. Seems to work fine. I had no problems with SU or keeping root. Data is working although it only reports 3G ???. When I do a speedtest it does give me app 10Mbit/s so something is funky.
The number of bars on the phone reception goes from 1-3 all the time even when I'm not moving. To be fair it could be my reception here at home. I'll know more later when I go to work.
Edit: I did try to re-install the kj6 modem and the bars went up to 4 (maybe others needs to do the same)
Thanks again
chastity said:
I did try to re-install the kj6 modem and the bars went up to 4 (maybe others needs to do the same)
Click to expand...
Click to collapse
I'm working on an update to fix wifi/signal issues, battery life (7 1/2 hours uptime and already dropped 13% is unacceptable for me...lol), fixing the su binary, some perms issues, and storage issues... Stay tuned folks!lol
I really like the default wallpaper, think you can upload it on here for me that would be awesome
P.s. awesome rom I used it for a couple hours, will probably revert back when you do another update.
Sent from my SGH-T959V using xda app-developers app
Thomas you are most likely having problems because gummy is based off of aosp not cm9..what base did u use to port it?
DnickDominic said:
Thomas you are most likely having problems because gummy is based off of aosp not cm9..what base did u use to port it?
Click to expand...
Click to collapse
I had to use CM9 due to kernel/ROM issues. But now that FB has updated his AOKP, I will be attempt a new build in the future. (The update that will be posted shortly, is NOT based on AOKP...)
Wait a tick... CM9 IS AOSP...
Oops... I screwed up in my own thread....lol
Download link for update is up...
The fourm is becoming to full with CM9 related threads. Just to help cut down on the same threads. Here will be the unofficial thread to talk about CM9. As Tbalden, and Kornyone asked us NOT to talk about bugs on the main thread. But to report issues to. http://code.google.com/p/teamds/issues/list
I see some users are using it, but we should get ALL. So come here to complain about anything CM9!
kornyone said:
CyanogenMod 9 is a free, community built distribution of Android 4.0 (Ice Cream Sandwich) which greatly extends the capabilities of your phone.
This is an alpha release, but you should find it stable for everyday use.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
This is an alpha, with most critical functionality working.
Working with Senior CyanogenMod team members, I brought TBalden into the project. TBalden has brought his large amount of Doubleshot experience to CyanogenMod Doubleshot porting, and together we have created (in very short order) a stable Alpha. TBalden created a team for maintenance of the Doubleshot with CyanogenMod going forward, "TeamDS".
INSTRUCTIONS:
- Upgrading from previous Doubleshot CM9 Alpha?
1. It should be safe to flash the Alpha5 zip on top of previous alphas. DO backup your phone in case something goes wrong, but a wipe shouldn't be necessary coming from CM9 Alpha1.
NOTE that the install wipes /system, so you may find you need to reflash gapps.
- First time flashing CM 9 to your MyTouch4g Slide (or coming from another ROM)?
1. Unlock/root your device and install Clockwork Recovery via ROM Manager.
2. Do a Nandroid backup!
3. WIPE
4. Install the ROM
5. Optionally install the Google Addon
- Upgrading from earlier CM7?
1. Follow instructions above. CM upgrade from CM7 Alpha1 will likely incur weird issues.
HOW TO REPORT BUGS OR PROBLEMS?
- Was your problem a hard reboot? Get us the file "/proc/last_kmsg".
- Was your problem a soft reboot or a "boot loop"? Run "adb logcat" and get the full output.
- Pastebin links preferred.
- For now, please leave comments in the forums. TBalden and I will will be monitoring for activity as we continue to fix known issues.
- Join #TeamDS on Freenode to talk to us directly.
Direct download URL: http://www.jeago.com/doubleshot/cm-9-alpha6-doubleshot-signed.zip
Alpha6 MD5: f9f0e4d95d7802e6ccb3b938b69ef7e0 . Build date 20120723.
(hosted by Jeagoss of CyanogenMod, thanks!)
You can find the latest CyanogenMod GAPPS CyanogenMod Wiki. Bottom of page, "CyanogenMod 9" GAPPS (latest works as of writing).
Thank you to EVERYONE involved in helping with testing, coding, debugging and documenting! Enjoy!
As of Alpha4, Doubleshot source (device and kernel) has official open source CyanogenMod repos, with Gerrit access (https://review.cyanogenmod.com)
----- CHANGES -----
Alpha6 Changelog (from Alpha5)
- Updated kernel base to v3.0.36 from upstream AOSP branch.
- Updated keylayout. TAB now mapped to ALT+TAB, www./.com functions properly.
- Camera is no longer crashing (in our testing). This is from an upstream CM frameworks change.
- Bluetooth wake lock is "fixed". When paired with handsfree audio, etc, and in standby, deep sleep works as expected.
- Bluetooth tethering is functional, though not 100% yet.
- Upstream changes in CyanogenMod. See http://review.cyanogenmod.com/#/q/status:merged,n,z for info on these Upstream changes.
Please note that camera and bluetooth functionality are still a work in progress. In testing, we find more compatibility, less crashing, less power consumption overall. If you find steps to reproduce crashing, etc, please capture logs.
The current buglist:
- If you use Face Unlock, I have experienced an issue where sometimes the screen will go "dark" when attempting to unlock the phone, requiring a battery reset. This is infrequent, but only Face Unlock causes this problem.
- Recording in camcorder @ 1080 doesn't work. (Other modes are fine, we have not removed 1080p from options yet).
- Lights issues (more than one):
-- Function keys on physical keyboard do not light up (CAPS/ALT), but the buttons work.
-- Backlight on keyboard works most of the time, but can randomly go dark.
- Random battery statistics issues. Not all people have this issue, it seems specific to the battery you use.
- Google+ Hangouts do not work right now.
- Very occasional radio (4g and sometimes bluetooth/wifi) dropoff/reset. Some have reports a SIM card message requesting power reset, which can be cleared by hitting back. Other times, turning data on/off resolves issue.
Please note flashing someone else's kernel may ruin your experience with this rom and I advise against it. This rom was a joint effort between kornyone & tbalden. A LOT of core works for msm8660 was put in by many CM Team members, and much of our work is based on their: toastcfh, Kali-, Kmobs, Bumblebee, cretin45, and all of the rest of CM!
You can get all of the Doubleshot source from the following URLs:
https://github.com/CyanogenMod/android_device_htc_doubleshot/
https://github.com/CyanogenMod/htc-kernel-doubleshot
https://github.com/TeamDS/vendor_htc_doubleshot
CyanogenMod source is available from CyanogenMod Github
If you'd like to to contribute to CyanogenMod, checkout our Gerrit instance.
http://code.google.com/p/teamds/issues/list
(Added 5/11) Join us on freenode, #TeamDS, if you would like to chat about this rom or provide help with fixes.
(Added 5/14) Updated to Alpha2.
(Added 5/23) Updated to Alpha3
(Added 6/8) Updated to Alpha4
(Added 6/27) Updated to Alpha5
(Added 7/23) Updated to Alpha6
(Added 7/26) Added Bug tracker http://code.google.com/p/teamds/issues/list
Click to expand...
Click to collapse
Sent from my Bulletproof_Doubleshot using Tapatalk 2
Alpha 6 Bug List:
Battery Drain with the new Linux 3.0.36 Kernel.
::Most Devs aren't using the 3.0.36 Kernel. They're back porting certain features. Like Faux http://rootzwiki.com/topic/31344-kernel004ap3315ghz-uvcifsutf-8powerhallinux-3x-hybridaug-01/ ::
WiFi Issues: Dropping in and out.
Most People are going back to Alpha 5 ATM. If your camera worked on A5. Then you should use it.
AgentCherryColla said:
The fourm is becoming to full with CM9 related threads. Just to help cut down on the same threads. Here will be the unofficial thread to talk about CM9. As Tbalden, and Kornyone asked us NOT to talk about bugs on the main thread. But to report issues to. http://code.google.com/p/teamds/issues/list
I see some users are using it, but we should get ALL. So come here to complain about anything CM9!
Click to expand...
Click to collapse
Does it matter how minor the bugs are or if they're incredibly random? I made a post yesterday to mention a few small glitches with CM9 but I don't want to report them if no one else might be seeing what I saw with my phone.
I can understand reporting an issue if it's possible to replicate it but if it's random in nature like mine is, how can it be addressed if only one person is seeing it?
Any and all bugs. Since this is a user thread, we can report anything.
Sent from my Bulletproof_Doubleshot using Tapatalk 2
Battery drain and random wifi-related reboots.
Sent from Spaceball One.
AgentCherryColla said:
Alpha 6 Bug List:
Battery Drain with the new Linux 3.0.36 Kernel.
::Most Devs aren't using the 3.0.36 Kernel. They're back porting certain features. Like Faux http://rootzwiki.com/topic/31344-kernel004ap3315ghz-uvcifsutf-8powerhallinux-3x-hybridaug-01/ ::
WiFi Issues: Dropping in and out.
Very, Very Slow USB speeds.
Most People are going back to Alpha 5 ATM. If your camera worked on A5. Then you should use it.
Click to expand...
Click to collapse
Sent from my Bulletproof_Doubleshot using Tapatalk 2
Hey guys,
Today i had complete data dropout on Alpha 6. Tried everything i could think of including fixing permissions, several reboots (through cyano & by removing battery), reconnecting to APN's, airplane mode & back, etc and could just not get it to work. It would look like it connected to 3G every once in a while but it would stay like that for less than a second and then go back to all white bars.
Finally flashed back to a nandroid of Alpha 6 from before I flashed the A6 Kernel and my data came back.
RUGGNATION said:
Hey guys,
Today i had complete data dropout on Alpha 6. Tried everything i could think of including fixing permissions, several reboots (through cyano & by removing battery), reconnecting to APN's, airplane mode & back, etc and could just not get it to work. It would look like it connected to 3G every once in a while but it would stay like that for less than a second and then go back to all white bars.
Finally flashed back to a nandroid of Alpha 6 from before I flashed the A6 Kernel and my data came back.
Click to expand...
Click to collapse
Mine too on Friday. I wiped cache and dalvik and it seemed to help.
Hastily spouted for your befuddlement
I'm on A5, and left my phone charging for 24 hours. Then calibrated it. Stellar battery.
Sent from my myTouch_4G_Slide using Tapatalk 2
AgentCherryColla said:
Sent from my Bulletproof_Doubleshot using Tapatalk 2
Click to expand...
Click to collapse
How do I get the official? Because I downloaded everything from here and followed every step and on bout phone it says not official cm9..help?
Sent from my myTouch_4G_Slide using xda premium
fozzy501 said:
How do I get the official? Because I downloaded everything from here and followed every step and on bout phone it says not official cm9..help?
Sent from my myTouch_4G_Slide using xda premium
Click to expand...
Click to collapse
There isnt an official cm9 build yet. Unless its not edited to show so in the ROM info. Its public and blah blah with " official cm support" but whatever
Sent from my myTouch_4G_Slide using Tapatalk 2
Wifi not working for me on Cyagenmod 9 alpha 6
Hopefully this is the right place to post this. I'm very new to flashing custom ROMs, but I am an experienced Linux admin so I'm not a total noob. I flashed cyagenmod 9 alpha 6 and everything seems to be working well except I don't have any wifi. If I try to enable wifi, it just hangs.
I launched the terminal application and ran /system/bin/ifconfig and it didn't return anything. I wonder if I need to install kernel modules or update radio or something.
Could someone point me in the right direction or help me debug this?
Thanks,
Tim
If you are S-On, did you pull the boot.img from the rom zip and use fastboot to transfer it to the phone?
http://forum.xda-developers.com/showthread.php?t=1508556
Yes, I am S-On, and I have transferred the boot.img from the rom zip to my phone using fastboot. I just did it again just to be sure and I still have the same issue.
QUOTE=txmtb;30627497]If you are S-On, did you pull the boot.img from the rom zip and use fastboot to transfer it to the phone?
http://forum.xda-developers.com/showthread.php?t=1508556[/QUOTE]
Ooo okay.and my phone of course if 4g but on the bar it says its 3g or an H wat does that mean and how do I gt my 4g back?
Sent from my myTouch_4G_Slide using xda premium
fozzy501 said:
Ooo okay.and my phone of course if 4g but on the bar it says its 3g or an H wat does that mean and how do I gt my 4g back?
Sent from my myTouch_4G_Slide using xda premium
Click to expand...
Click to collapse
H = T-Mobile 4G
H = HSPA
The 4g but is just an icon. When it flips back and forth between 3g and H instead of staying H/4G you are seeing the device kick into that faster protocol as needed and throttling back when it isn't needed.
Hastily spouted for your befuddlement
I'm running CM9_A6 but with Alpha 5's kernel. You can flash it in a nice update.zip by wildchild right here. I'm getting the same battery life I got with stock, GB sense, etc. I'd also recommend the Anker 1900 mah battery (x2) with charger for $30 for a few extra hours of battery life. It's well worth it:cyclops:
---------- Post added at 05:50 AM ---------- Previous post was at 05:33 AM ----------
Coug76 said:
H = T-Mobile 4G
H = HSPA
The 4g but is just an icon. When it flips back and forth between 3g and H instead of staying H/4G you are seeing the device kick into that faster protocol as needed and throttling back when it isn't needed.
Hastily spouted for your befuddlement
Click to expand...
Click to collapse
yup... it's flipping from UTMS (lower power/speed) to HSPA(in most cases HSPA+) to save battery, network congestion, etc. As you said... they are just icons located in framework-res.apk... You can change 'em to say 5G lol! I did a few mods for some ICS themes on CM7 for HTC Vision. I should redo some for CM9. Basically, just change the H to H+, H to 4G, E to 2G, etc... I could redo them if anyone's interested. It's nothing too complicated: extract and decompile apk, edit pngs via photoshop, replace images, recompile and sign:silly: I really need to play around with ICSeseses framework some. ALOT has changed since GB. I wish I had as much time as I had hoped when I first got the DS. Work, home, life has kept me way more busy than I'd like lol! Well... getting off track here. My bad
tgoodaire said:
Yes, I am S-On, and I have transferred the boot.img from the rom zip to my phone using fastboot. I just did it again just to be sure and I still have the same issue.
QUOTE=txmtb;30627497]If you are S-On, did you pull the boot.img from the rom zip and use fastboot to transfer it to the phone?
http://forum.xda-developers.com/showthread.php?t=1508556
Click to expand...
Click to collapse
[/QUOTE]
You need to flash the boot.img right before 1st boot. Or wire trick S-Off. The weekend is coming up, and it's a fun little project.
Sent from my HTC MyTouch 4G Slide using Tapatalk 2
fozzy501 said:
Ooo okay.and my phone of course if 4g but on the bar it says its 3g or an H wat does that mean and how do I gt my 4g back?
Sent from my myTouch_4G_Slide using xda premium
Click to expand...
Click to collapse
I've worked for T-Mobile many times. They do not have "True 4G". How I see it, it's faster 3G. CyanogenMod says that T-Mobile is not 4G. That's why it's an H, for HSUPA. T-Mobile says it's 4G, but LTE is legit 4G. LTE has much more faster speeds that HSUPA.
Sent from my HTC MyTouch 4G Slide using Tapatalk 2
CyanogenMod 10.2 (Android 4.3) for the AT&T MB865 (Edison)
BACKGROUND: I was given an Atrix 2 a few months ago as a dev phone to help the community any way I could ...
And this ROM represents a portion of that work. I work with many of the devs in this community on a weekly basis and I'll make sure they know how to build this ROM (or variants).
This build is somewhat untested for phone / data. I'll need some feedback here. Currently the other Moto OMAP phones have phone/data/gps etc.
Download CM10.2 for Edison:
[NEWEST] 2013-08-12:
Mirror 1: http://goo.im/devs/Hashcode/edison/cm10.2/cm-10.2-20130812-UNOFFICIAL-edison.zip
md5sum: 04d56f5b442d60282d727ea418031540
2013-08-08:
Mirror 1: http://goo.im/devs/Hashcode/edison/cm10.2/cm-10.2-20130808-UNOFFICIAL-edison.zip
md5sum: 3e8d7f65b4bf43df6a4318e49a5aca25
GAPPS (For now use these for Android 4.3/CM10.2 builds):
http://goo.im/devs/Hashcode/gapps/
[ Reboot once for Wifi to start working ]
Older builds are found here:
http://goo.im/devs/Hashcode/edison/cm10.2/
INSTRUCTIONS:
Flash in BMM with Gapps
Make sure to do a FULL wipe (system / data / cache) when coming from Android 4.2 ROMs
Can restore apps + data using Titanium Backup
WHAT'S NEW?
http://developer.android.com/about/versions/jelly-bean.html
CHANGES (always includes latest from CM):
[08/12] Fixes for baseband
[08/12] Fixes for GPS
[08/12] Added basic SElinux policies in permissive mode (thanks DHacker)
[08/08] First public build (Alpha)
CURRENT KNOWN ISSUES:
GPS is broken. Debugging.
Reboot once for Wifi to work
Focal will probably crash on entry/exit.
In general performance needs work
WORKING:
UI / HW rendering
Wifi
Bluetooth
Camera
Codecs
UPCOMNG CHANGES:
SElinx addition for security
More kernel additions for better Android 4.3 compatibility
Submit Edison to CM as an official device
INSTRUCTIONS FOR BUILDING THIS ROM
COMING SOON
RESERVED
Looks good! Cant wait for future updates.
So great:good:
Hashcode you rule man! Thanks a ton! You've just joined the elite team!!! :thumbup:
Sent from my MB865 using xda premium
Thanks a lot hashcode...you are awesome.... I expected a lot of bugs on the first build ...doesn't look like that...however will this work on non ATnT ?? Eager to try this out ...
Sent from my MB865 using XDA Premium HD app
As you mentioned .. Baseband not working, and there is a green led bug ..
BTW , for some reason wifi started to work on the first boot on my device..
Nice to see you around man. If I can get my touchscreen fixed (and get the stupid phone to actually boot now) I hope to get working on some more stuff.
2 words - absolutely phenomenal!!! Thank you very, very much Hashcode for bringing the newest installment of Android to us! We are not worthy of such amazing devs! *Bows* :thumbup:
Sent from the Ace's MB865 using xda-developers app
Has anyone got phone problems....reflashed,reboited a number of times...still no dice..i did notice this wont boot w/ jbx or atleast i cant...i cant set apn either
iamezio said:
As you mentioned .. Baseband not working, and there is a green led bug ..
BTW , for some reason wifi started to work on the first boot on my device..
Click to expand...
Click to collapse
Can i get the output of: adb logcat -b radio > logcat-radio.txt
(Either in pastebin link or PM'd)
The only devices I can test data/phone on are the CDMA Moto's, so I'll need some help w/ testing GSM.
btw forgot to mention, brightness control is broken too .
amynjimmy said:
Has anyone got phone problems....reflashed,reboited a number of times...still no dice..i did notice this wont boot w/ jbx or atleast i cant...i cant set apn either
Click to expand...
Click to collapse
I got it to boot on system 1 first try. Jbx wont work bc this rom is 4.3 and jbx is made for 4.2 roms...baseband doesnt work either..
Booted fine on any system...verified on all but system 1...firgot jbx is 4.2.... duh...
Hashcode said:
Can i get the output of: adb logcat -b radio > logcat-radio.txt
(Either in pastebin link or PM'd)
The only devices I can test data/phone on are the CDMA Moto's, so I'll need some help w/ testing GSM.
Click to expand...
Click to collapse
Ill test for u i got staight talk
sent from my thumbs
New build coming:
FIXES:
Baseband is now showing correctly for me (no SIM tho)
GPS driver is now loading correctly
Hashcode said:
New build coming:
FIXES:
Baseband is now showing correctly for me (no SIM tho)
GPS driver is now loading correctly
Click to expand...
Click to collapse
Your working fast man! Really appreciate your hard work. Many thanks given!:good:
How's the battery life?
filip990 said:
How's the battery life?
Click to expand...
Click to collapse
I wouldn't consider it good for the moment, I think there's a wake lock being held somewhere in the phone data / gps system. And Google Services is very demanding on the system atm. All of which will be ironed out over time.
DERP. We're adding SElinux policies as well, but it's breaking the Edison boot at the moment. I'll fix it when i get some time after dinner and get that build up sooner or later.
WildKernel
for AT&T Samsung Galaxy S II
Go check out Tame! It goes great with this and it handles OTA updates for this kernel.
This is a Linux based (3.0.101) Kernel which is maintained by me kept inline with the Cyangenmod Kernel so this is compatible with ALL the latest KitKat Roms (unless otherwise stated in the ROM).
Please report anything good and bad so that I know what to keep and what not to keep for the next release. This also helps me push out fixes faster when presented with lots of information (such as logs etc.).
Please see changelogs for an in-depth look at features. Also take a look at the screenshots for a sneak peek.
Feeling like a critic? Leave a review!
Link broken? Try one of the mirrors, Still a no go? Goto my signature and click the file backups link, then navigate to what you were looking for.
v013: AFH
TRU Mirrors: #1 / #2
All Releases: AFH | TRU Mirrors
[#WildKernel-Celox-CL]
[/HIDE]
Thanks:
TeamChopsticks & CyanogenMod
TeamSXL
Cl3Kener
Team Hydra
TeamDS
faux123
Sultanxda
Tamcore
cretin45
showp1984
RomanBB
and any others I may have missed
Info on Governors/Schedulers
You may find my source hosted @ Github
There is NO need to clear caches, kernel installer handles everything. Just flash and reboot.
My recommended Governor/Scheduler setups:
Battery w/ Good Performance at 96-1350mhz:
Intellidemand/SIO (personal choice)
Lazy/SIO
Badass/SIO
Ondemand/SIO
Wheatley/SIO
'lil more Performance at 96-1512mhz:
Smartass/SIO
Hyper/Deadline
Samsung/Deadlne
lulzactive/Deadline
Savagedzed/Deadline
Best Performance (worst battery): 384-???mhz
Gaming/Deadline
Performance/Deadline
Did you read the announcement? (page header)
XDA:DevDB Information
WildKernel for the AT&T Galaxy S II (skyrocket), Kernel for the AT&T Samsung Galaxy S II Skyrocket SGH-I727
Contributors
Emmanuel U
Source Code: https://github.com/EmmanuelU/wild_kernel_samsung_msm8660/tree/android-msm-skyrocket-3.0
Kernel Special Features: Too many features to list, just install it.... now.
Version Information
Status: Stable
Current Stable Version: 013
Stable Release Date: 2015-01-29
Created 2014-10-15
Last Updated 2015-02-01
Tried to install but keep getting an md5 error and a message about getprop device not equaling.
Downloaded and tried twice...
Sent from my SAMSUNG-SGH-I727 using XDA Free mobile app
Installer zip fixed, please re download if you downloaded kernel before seeing this message....thanks!
The new installer worked, thanks. I'll play around with it and report back but I can already say that WiFi direct doesn't work (it's always the first thing I check b/c it's the only problem I have with any of the skyrockets current kernels)
Sent from my SAMSUNG-SGH-I727 using XDA Free mobile app
tsew2674 said:
The new installer worked, thanks. I'll play around with it and report back but I can already say that WiFi direct doesn't work (it's always the first thing I check b/c it's the only problem I have with any of the skyrockets current kernels)
Sent from my SAMSUNG-SGH-I727 using XDA Free mobile app
Click to expand...
Click to collapse
Are you sure that problem is directly related to the kernel? It sounds more like a Rom issue....does it work on your rom's stock kernel?
Emmanuel U said:
Installer zip fixed, please re download if you downloaded kernel before seeing this message....thanks!
Click to expand...
Click to collapse
I guess the burning question for me if this includes all of Sultan's bluetooth fixes. His kernel for CM really is the gold standard for our device thus far.
I see you mentioned him in the OP so I am hopeful lol. I'd love to be able to flash this kernel with any rom knowing the usual plagues (such as the constant BT disconnect) are no longer an issue.
Thanks a lot for this! Nice to see the SR still getting some love
Emmanuel U said:
Are you sure that problem is directly related to the kernel? It sounds more like a Rom issue....does it work on your rom's stock kernel?
Click to expand...
Click to collapse
I'm pretty sure it's at the kernel level only because it works with @Sultanxda's kernel. His is the only 4.4.x kernel that WiFi direct has ever worked on for me on the skyrocket. It worked on the official CM10.2 ROMS/kernels but every since CM11 was introduced it's been broken. The ROM I'm using now could connect with WIFI direct when built with Sultan's kernel.
Even with Sultans kernel, Miracast (with uses WIFI direct) will connect but the graphics are all scrambled. I suspect that has to do with some of the memory enhancements he's made. If I knew how to build kernels I'd like to try using the official CM11 kernel source and only applying his WIFI direct commit to see what the results are, but unfortunately I don't know how to build them and can't seem to find the time to do the research to learn. Maybe one day.
I've had no issues otherwise and I've been using it for a few days now. Thanks
I tried flashing usin dirtya unicorns i can get oast boot logo ut restarts
raptorddd said:
I tried flashing usin dirtya unicorns i can get oast boot logo ut restarts
Click to expand...
Click to collapse
Once your screen goes black from the reboot, hold both the volume buttons until your device goes into recovery. Then either use ADB or your recovery's file manager to retrieve /proc/last_kmsg and it post it here. It always helps to present issues with a log ready, for future reference.
So... I got bored.
I installed the following ROM's and got bootloops for each (basically every 4.4.4 ROM I know of for Skyrocket):
AOKP - Dated 15-Sep-14
CM11 - Dated 19-Oct-14
PacRom - Dated 25-Aug-14
Mokee - Dated 12-Oct-14
Dirty Unicorns - Dated 2-Oct-14
SlimKat - Dated 14-Oct-14
CarbonRom - Dated 17-Oct-14
Beanstalk - Dated 9-Oct-14
CandyKat - Dated 18-Oct-14
Paranoid - Dated 9-Oct-14
I didn't test the following ROMs:
SultanXDA CM11 - Dated 19-Oct-14 Didn't test since I was told it would bootloop
MIUI V6 - Currently getting a bootloop so no reason to try it
Emmanuel U said:
Once your screen goes black from the reboot, hold both the volume buttons until your device goes into recovery. Then either use ADB or your recovery's file manager to retrieve /proc/last_kmsg and it post it here. It always helps to present issues with a log ready, for future reference.
Click to expand...
Click to collapse
Never done this before (well, I know how to get into recovery...lol). I'll post the file in a few minutes after reflashing one of the ones above. Can i empty this folder when I'm done? There's 200 or so subfolders in there.
ETA: Added attachment.
xonelith said:
So... I got bored.
I installed the following ROM's and got bootloops for each (basically every 4.4.4 ROM I know of for Skyrocket):
AOKP - Dated 15-Sep-14
CM11 - Dated 19-Oct-14
PacRom - Dated 25-Aug-14
Mokee - Dated 12-Oct-14
Dirty Unicorns - Dated 2-Oct-14
SlimKat - Dated 14-Oct-14
CarbonRom - Dated 17-Oct-14
Beanstalk - Dated 9-Oct-14
CandyKat - Dated 18-Oct-14
Paranoid - Dated 9-Oct-14
I didn't test the following ROMs:
SultanXDA CM11 - Dated 19-Oct-14 Didn't test since I was told it would bootloop
MIUI V6 - Currently getting a bootloop so no reason to try it
Never done this before (well, I know how to get into recovery...lol). I'll post the file in a few minutes after reflashing one of the ones above. Can i empty this folder when I'm done? There's 200 or so subfolders in there.
ETA: Added attachment.
Click to expand...
Click to collapse
Hmm interesting, since I dont have this device, I can't do this myself. But do u think u can you do the following?
1. Flash one of the Roms you listed that bootlooped above
2. Open my kernel installer and delete /system/bin/thermald
3. Push it to your device and install
4. Does it boot?
Emmanuel U said:
Hmm interesting, since I dont have this device, I can't do this myself. But do u think u can you do the following?
1. Flash one of the Roms you listed that bootlooped above
2. Open my kernel installer and delete /system/bin/thermald
3. Push it to your device and install
4. Does it boot?
Click to expand...
Click to collapse
Sadly, bootloops again (I installed the AOKP rom; clean, no GApps, let it boot once, boot to recovery and flash modified zip).
xonelith said:
Sadly, bootloops again (I installed the AOKP rom; clean, no GApps, let it boot once, boot to recovery and flash modified zip).
Click to expand...
Click to collapse
Too bad i hope emmanuel fix this.. Anything i can do ..
Reboots
I was playing around in Tame earlier and my phone rebooted a few times. I wasn't doing anything too crazy, turned off SweepToWake, changed the governor to Lazy and it froze and rebooted. The first time it happened I had changed the max frequency and a couple of other things, so I attributed the reboot to that, however when it booted back up I only changed the two items mentioned above and it rebooted again, this time it stayed off so I booted into recovery and got the kMsg, hopefully it helps. That's not the first time I've used Tame, I initially installed it, changed a few things and everything was fine, but my phone had been turned off since then so I was going back in to set it back the way I had it.
I'm currently using the liquidsmooth as my ROM, and this is really the first issue I've had with your kernel (other than WIFI direct, but that's pretty much all the kernels for this device). I think you've even improved my battery life, I don't do gaming or anything so I don't really ever notice any performance gains or that sort of thing, but I haven't noticed anything moving slower, which is good.
Update
Another minor update today, sorry about the initial discrepancies! Blame me, since I don't actually have this device. Well it should boot on all ROMs now, enjoy .... I guess.
Works great on PA! I'll mess with it for a bit and provide useful feedback.
Sent from my SGH-I727 using XDA Free mobile app
Flashed successfully on Carbon 10/17 nightly. Seems pretty snappy so far. Nice work! :thumbup:
Hi. Thanks for sharing this Kernel. I have a question...
Before, I was using Carbon with its stock kernel, Conservative governor and noop; there was no lag at all, but battery seems to last too little time in continous use and even when it was with screen off. Even before that, the CPU governor was set by default at Interactive, but the Skyrocket freezes in several times, sometimes after unplug it from charger or after unlocking it after a time (like 1 hour or something), sometimes the device hangs so long until I reboot it or it reboots itself. So, Interactive isn't the best choice for me.
The question is: What is the best choice for a governor if I want the longest battery life, but with any freezing any time?
Could you please help me?
franzpimp87 said:
Hi. Thanks for sharing this Kernel. I have a question...
Before, I was using Carbon with its stock kernel, Conservative governor and noop; there was no lag at all, but battery seems to last too little time in continous use and even when it was with screen off. Even before that, the CPU governor was set by default at Interactive, but the Skyrocket freezes in several times, sometimes after unplug it from charger or after unlocking it after a time (like 1 hour or something), sometimes the device hangs so long until I reboot it or it reboots itself. So, Interactive isn't the best choice for me.
The question is: What is the best choice for a governor if I want the longest battery life, but with any freezing any time?
Could you please help me?
Click to expand...
Click to collapse
See the OP for ny recommendations.
Emmanuel U said:
See the OP for ny recommendations.
Click to expand...
Click to collapse
Yes, I'm sorry, I forgot to say that actually I'm using Lazy governor at 96-1350 and sio as you recommended it, but I thought that maybe there's a no listed recommendation for maximun battery or something like that.
Alpha Omnirom 5.0 (Trying to get calls to work properly on CM first before doing more omni builds))
baseband is still unknown. So no phone calls or data.
Alpha Cyanogenmod 5.02 with working baseband
https://drive.google.com/file/d/0B4k5OpXTXcS9NF8zN1dreFAtOUk/view?usp=sharing
Build 5.0.1:
https://drive.google.com/file/d/0B4k5OpXTXcS9NVp0Sm9YMFdEUUE/view?usp=sharing
Calls should now work without lockups. Data seems flakey? Let me know your finding
(This is now working due to rolling back to old RIL blobs (pre 4.3). This means that the connection process takes longer on initial start-up and switching to air-plane mode as well. )
Leave wifi on to avoid reboots.
Also this doesnt have the camera bug fix yet that Derteufel made.
Nice.. Never been a fan of omni.. I'm more a cm or aosp person
Sent from my GT-I9305 using XDA Free mobile app
REVIEW
Thank you very much for this build for the i9305
I have been waiting for the first lollipop build
I installed this rom and this is a written review after one hour of usage
1 the phone boots without any problem
2 lollipop gapps are working
3 Sometimes wifi works and sometimes no
4 Bluetooth works
5 some random reboots and sometimes it stuck so I need to remove the battery to get it working again
6 no FCs at all
7 seems fast
8 when I open an app installe from play store the phone stucks and I remove the battery
Thanks again and I wish u improve this rom in the coming days
Good job mate but I think it'll be better to edit your thread to make something more attractive, Flash Guide for noobs , links to gapps, alternative dl links , what works, what doesn't , credits , shiet like this would be better for everyone.
The main problem of your rom seems to be the kernel (random reboots , wifi issues , random freezes)
Anyways , good luck and thank you for the rom
aaz03 said:
Good job mate but I think it'll be better to edit your thread to make something more attractive, Flash Guide for noobs , links to gapps, alternative dl links , what works, what doesn't , credits , shiet like this would be better for everyone.
The main problem of your rom seems to be the kernel (random reboots , wifi issues , random freezes)
Anyways , good luck and thank you for the rom
Click to expand...
Click to collapse
Thanks for the feedback.
This isnt meant for n00bs to flash yet. This is an alpha.
In Alphas you expect to get problems! This is only meant for testing and for trying out 5.0 on your device...
can we flash this normally?
CM 5.0.1 build added to OP. Please read notes about what isnt working before flashing!
So the latest build is the most stable one (CM12)? Can I help you in any way, testing, logs or something?
limnaln said:
So the latest build is the most stable one (CM12)? Can I help you in any way, testing, logs or something?
Click to expand...
Click to collapse
Well at this point in time no. I've just got to try to figure out whats going wrong still and then people can test to see if it works for them and if there is any long term problems with it. Until then its just make a change, compile and flash and I'll let people know if I get anywhere.
for me it is stuck on bootloop... first flashed wih wipe full/dalvik/cache then flashed gapps - bootloop. second dirty flashed again, booted, android is upgrading, optimizing apps, then rebooted and again bootloop... how to get past this ?
Tested. Boots okay. Data baseband ok. Incoming calls ok. Outgoing calls impossible. Tested with 2g
laurent.siku said:
for me it is stuck on bootloop... first flashed wih wipe full/dalvik/cache then flashed gapps - bootloop. second dirty flashed again, booted, android is upgrading, optimizing apps, then rebooted and again bootloop... how to get past this ?
Click to expand...
Click to collapse
As I said this doesnt have the camera firmware patch added so some people might get bootloops... I'll add this in the next day or two from Derteufel
infrag said:
As I said this doesnt have the camera firmware patch added so some people might get bootloops... I'll add this in the next day or two from Derteufel
Click to expand...
Click to collapse
So, we are at the final step - outgoing calls, huh?
There also appeared some new commits on nameless gerit, just informing
Outgoing calls can be made now. But it seems to lockup when hanging up. New link in OP for 'new' build.
Calls should now work!
This is using old ril blobs so initial connection from boot will take longer. Also I think data is stuffed a bit. Seems to take a long time to get connected. Seems to work for me after that though. Post your finding please!
Hopefully Derteufel can figure out the problem with the newer blobs but till then this is working if anyone is interested.
Edit: only got one question. Can wifi be turned off. Will disabling it cause bootloops?
infrag said:
Calls should now work!
This is using old ril blobs so initial connection from boot will take longer. Also I think data is stuffed a bit. Seems to take a long time to get connected. Seems to work for me after that though. Post your finding please!
Hopefully Derteufel can figure out the problem with the newer blobs but till then this is working if anyone is interested.
Click to expand...
Click to collapse
Yes, it does work indees! In and out! Really great, the whole system is smooth.
Great work. Will be swapping back to the i9305 from the note 2.. All we need now is for someone to work on the stock cm kernel to make it smoother.
Sent from my GT-N7105 using XDA Free mobile app
Great work on calls! Please let us know when you include the camera firmware fix so I can download again and flash, this is the only thing causing me bootloops and preventing me for further testing. Thanks
Sent from my GT-I9305 using XDA Free mobile app
winxuser said:
Great work. Will be swapping back to the i9305 from the note 2.. All we need now is for someone to work on the stock cm kernel to make it smoother.
Sent from my GT-N7105 using XDA Free mobile app
Click to expand...
Click to collapse
Stock kernel? We are only using that to get data working... I'm sure Derteufel will switch to his own kernel as soon as he irons out the problems with phone calls locking up etc. (Or he switches to old RIL blobs for now)
Then there will be the challenge of getting R4P0 drivers to work properly.
After that who knows? Fix opensource compass?
Then Nameless may have other upgrades to implement for HWC.