I was able to root my cmp745e, I installed the drivers and got rktools to work. I found a rom and loaded it with my stock kernel but my touchscreendoesnt work. I can use my wireless keyboard and everything works great. Is there a way to get my touchscreen drivers off my device and use them with the new rom?
jc073 said:
I was able to root my cmp745e, I installed the drivers and got rktools to work. I found a rom and loaded it with my stock kernel but my touchscreendoesnt work. I can use my wireless keyboard and everything works great. Is there a way to get my touchscreen drivers off my device and use them with the new rom?
Click to expand...
Click to collapse
where did you find the rom?
I found the rom on this site, its odys rom. It is jb and works great other than the touchscreen not working.
Related
Ok.. The manufacturer finally release ICS for this tablet, it initially does not have gapps..... you need to install CWM and reboot into recovery through ADB... like i said you need to have CWM already installed!!!!! this works on ALL my tablets i just checked it out... it has market, gmail, and superuser. once it is installed you can access recovery by holding down volume:up and power until recovery shows up... ( before It could not be done)
here is the link and instructions for CWM:
http://forum.xda-developers.com/showthread.php?t=1378594
here is my nandroid:
http://www.2shared.com/file/HInNxhH1/2012-02-13143731.html
(i had to strip out google talk, it kept on giving me problems..)
on a side note you need a external card to access the nandroid, put it in /clockworkmod/backup/
i haven't tested anything else, ie can not load youtube app and not sure about video playback... netflix only plays sound not video...
if this helped you hit the like button.. i am poor and i only do this when i have time and out of love for this great device and OS.... i am not responsible if your wife leaves you or a natural disaster happens in your area or you brick that sucker.... flash at your own risk...
thanks goes out to everyone that made this possible... maybe i will see if i can port CM9 but don't hold me to that..
Good job, I was actually going to post this today as well until I searched to make sure no one else had already done it. CWM works great with this now that the capacitive buttons work, now to do some modding so we can get cm9 running on it. I still can't get netflix apk to stream, the sound works but no video.
ya i know! that sucks... i need to try to get a youtube app and push it to see if it works.. but i really love it... i wonder if i can try the momo9 cm9 and see what works and go from there.. but school and work keeps me busy as hell!!!
Google Talk works for me with "newtech25_for_ics4.0.3"- script
Google Talk does not work with anything I tried. Tried a lot of patches and versions. Any ideas ?
Try to reflash manufacture rom then newtech25_for_ics4.0.3 script.
i used this one http://www.sappasit.go.th/android/newtech25_for_ics4.0.3.zip
but if figured out there is bug in calendar sync with newtheck script. talk works also with video no problems at all
The gapps package I installed from clockwork mod had youtube in it and it works fine so I have no idea why netflix wouldn't work on ics when it was fine on the stock gb firmware.
what was the gapps package you used?
At this point two main issues
Market does not show system apps.
Some apps (google), even if installed from the Market gives a android system stop responding...
Update
Errors were due to Gapps not properly installed...
Small issue though Camera photos are up side down ?! Can anyone test it for me as well? as this may affect skype video calling ie.
Last thing to sort out Full market support and flash...
my camera works fine on mine, and i restored on 3 of the same tablets... i am working on finding a working google apps i guess... but everything works on mine. Weird, but i will lool for another ICS google apps and then do another nandroid. thanks for your feedback..
Use gapps v11 from CM9. Just flash them from CWM.
Sent from my Alldro Speed using xda premium
CWM on DVC Z7
Hi!
I've dot dvc z7 - its clon of ly-f1.
i try to inxtall cwm, but when i load recovery i can see ony icon and i cant see the menu.
what i do wrong?
sory for my english)
[email protected], if you are using gingerbread i have tried CWM on it and couldnt get it to work..... if on ICS try it again.... if it is a clone it should work.... unless they are using a different touchscreen driver or touchscreen???? i do not know off the top of my head...
web_ninja said:
[email protected], if you are using gingerbread i have tried CWM on it and couldnt get it to work..... if on ICS try it again.... if it is a clone it should work.... unless they are using a different touchscreen driver or touchscreen???? i do not know off the top of my head...
Click to expand...
Click to collapse
Im using last gb. 2.3.4 n all is worked. But if i install last ics from f1, touch keys isnt work and touchscreen is crazy when tablet charge.
hope next build of ics will work ok)
Sorry for the question.
Can i use CWM linked on first thread post for LY-F1?
They say only supported device is NOVO7 Advanced
Other thing, when i reboot into recovery from ROM Manager my tablet just boots normally, what's wrong?
releaser said:
Sorry for the question.
Can i use CWM linked on first thread post for LY-F1?
They say only supported device is NOVO7 Advanced
Other thing, when i reboot into recovery from ROM Manager my tablet just boots normally, what's wrong?
Click to expand...
Click to collapse
What version firmware you use?
may be cwm dont work with rom manager.
turn off ur tablet and press keys plus and power.
and cwm work with ics only.
[email protected] said:
What version firmware you use?
may be cwm dont work with rom manager.
turn off ur tablet and press keys plus and power.
and cwm work with ics only.
Click to expand...
Click to collapse
Thanks for the answer.
I'm on 2.3.4 from 20120107 when i press vol+ and power i only get a triangle with exclamation point inside and an android icon but nothing else.
So i need to flash ics first and then use cwm to flash the nandroid with gapps, right?
Regards
Hey I was trying to install CWM into my F1 and I cannot run the given scripts. It says permission denied. Any way to work this around?
It needs root. The easiest way is with Unlock Root.
Sent from my Nexus S using xda premium
As far as I know, the device comes pre rooted. I tried to root it again with superoneclick and it says it is already rooted.
Okay so Im not that new with rooting androids or with using custom roms, so I'm not that much of a noob. The other day I decided since CM9 was in official nightlies I would give it a try. So I backed up my rom which was stock and rooted and I installed CM9 all through CWM recovery. Once in CM9 i notice the tablet wont connect to my phones tethering which is the only way I can get internet on it so I deciced to go back to my backup. But now on my backup the Wifi wont even turn on, anyideas why?
Hello,
I got exactly the same problem. I have installed CWM 5.5.0.4 and I tried CM9 nightly and return to Nandroid BackUp. Then no more wifi..
I tried to flash differents versions of stock kernels, but it was impossible to flash it : "Installation aborded"..
I used fastboot to install a new recovery : TWRP, but same problem : impossible to flash any kernels..
Does someone has the same problem? Or any idea to solve it?
Thank a lot !
Crystalyse
I also had another question...
is there any rom that will connect to Android tethering (ad-hoc)?
I was able to connect on stock rom rooted with cwm recovery but now every rom I tried so far wont connect to it.
Is there a way to work around this issue
I'm having similar problems, check this out:
http://forum.xda-developers.com/showthread.php?t=1438297
Going to try when I get home but other users are reporting this working for them.
KB Smoka said:
I'm having similar problems, check this out:
http://forum.xda-developers.com/showthread.php?t=1438297
Going to try when I get home but other users are reporting this working for them.
Click to expand...
Click to collapse
+1 That's the fix (WPA_Spullicant2) that worked for me. My TF300 just kept saying "Saved" when trying to connect to ad-hoc. Replaced the WPA_Supplicant2 file and all is working well.
It's a known issue with wifi not working on stock rooted nandroid backups. If you go back to stock, you will need to follow the step in this post from Xplod.
http://forum.xda-developers.com/showpost.php?p=26435786&postcount=2
meatrocket said:
+1 That's the fix (WPA_Spullicant2) that worked for me. My TF300 just kept saying "Saved" when trying to connect to ad-hoc. Replaced the WPA_Supplicant2 file and all is working well.
Click to expand...
Click to collapse
Sent from my ASUS Transformer Pad TF300T using XDA
Worked perfect....Thanks again for this.
Inc2.CM7.Condemned.Wireless.Tether.2.0.7
hey guyz
i want to overclock my asus tf101
i am running Revolver 421 based with android version 4.03
tried using Clemsyn-Blades from http://www.youtube.com/watch?v=mKP0sJxHM3I and it was a failure cuz the version i used was not meant for android 3. something.
so please can someone provide me with some current overclock tools.
would be realy helpfull guyz,
thnx
Flash KatKiss (Android KitKat 4.4.2) and it has the overclockable Kernel and Overclock settings built in
http://forum.xda-developers.com/showthread.php?t=2592890
Make sure you are running TWRP Recovery before flashing KatKiss ROMs or JellyBean ROMs though
*Detection* said:
Flash KatKiss (Android KitKat 4.4.2) and it has the overclockable Kernel and Overclock settings built in
http://forum.xda-developers.com/showthread.php?t=2592890
Make sure you are running TWRP Recovery before flashing KatKiss ROMs or JellyBean ROMs though
Click to expand...
Click to collapse
thnx for the replay but i dont see this as a solution, i just want to have revolver rom but with a overclockable possibilities, i already tried katkiss and i dont like it.
i tried to flash this kernel http://forum.xda-developers.com/showthread.php?t=1565519 V22.6 and was able to overclock with succes but usb mount wont work.
each time i plug in the tf101 in my laptop, i get a notifcation on my tablet (USB debuging conected) when i unselect this through the seting menu, nothing happens.
anny solution ? i also tried V21 but the same problem with usb mount
abati said:
thnx for the replay but i dont see this as a solution, i just want to have revolver rom but with a overclockable possibilities, i already tried katkiss and i dont like it.
Click to expand...
Click to collapse
If the ROM doesn't come with an overclockable kernel already, you'll have to find a compatible one
Once you have the correct Kernel installed, grab SetCPU or similar from Google Play to overclock the CPU
Those ROMs are so old now I don't know which ones contain OC kernels and which ones don't, which was why I suggested KatKiss
Check the ROMs main thread for what is included / which Kernel it contains
abati said:
i tried to flash this kernel http://forum.xda-developers.com/showthread.php?t=1565519 V22.6 and was able to overclock with succes but usb mount wont work.
each time i plug in the tf101 in my laptop, i get a notifcation on my tablet (USB debuging conected) when i unselect this through the seting menu, nothing happens.
anny solution ? i also tried V21 but the same problem with usb mount
Click to expand...
Click to collapse
No idea about the USB problem, maybe is an issue with the ROM / Kernel you've flashed - these ROMs don't have much / any support now
If you want to keep using it, then your best bet is to start reading through that ROMs thread and see if there is a solution in there or hope that someone else can remember / or is still using the same ROM
yeah i dont think it has to do something with how old that rom is, cuz i know revolver did allot of updates to ensure quality roms, and from the kernel link i shared there was a guy who was on revolver 1.3.1 who did not have any problems at all on the first page at the bottom you can read that.
everything works fine for me like the wifi, charging except the mounting of the device to a pc -_-
I mean because of the age of the ROM, you're going to struggle to find any answers to problems you have with it
Since my One S C2 wifi/bt has died(it just wont turn on after a discharge) and to get phone to boot I have to use wrong kernel. Since I can't use wi-fi to update applications I have to use internet passthrough. It works perfectly fine on my dads laptop with windows xp but it wont work on my pc with 8.1. Any ideas how to fix it? Its really annoying... Fastboot/ADB works fine because I used the FrankenUSB method to fix it.
Mixz1890 said:
Since my One S C2 wifi/bt has died(it just wont turn on after a discharge) and to get phone to boot I have to use wrong kernel. Since I can't use wi-fi to update applications I have to use internet passthrough. It works perfectly fine on my dads laptop with windows xp but it wont work on my pc with 8.1. Any ideas how to fix it? Its really annoying... Fastboot/ADB works fine because I used the FrankenUSB method to fix it.
Click to expand...
Click to collapse
Using latest DRIVER ?
LS.xD said:
Using latest DRIVER ?
Click to expand...
Click to collapse
Did that, didnt work
Mixz1890 said:
Did that, didnt work
Click to expand...
Click to collapse
Damn. May I ask, why you can't use original firmware BUT have to use a wrong kernel to use your phone. Can't imagine that its not fixable.
LS.xD said:
Damn. May I ask, why you can't use original firmware BUT have to use a wrong kernel to use your phone. Can't imagine that its not fixable.
Click to expand...
Click to collapse
Im using Vuper Rom 5.2.1 with stock kernel. It feels much more snappier and looks better than the stock rom. I tried everything to get the WiFi working but still no luck...
Mixz1890 said:
Im using Vuper Rom 5.2.1 with stock kernel. It feels much more snappier and looks better than the stock rom. I tried everything to get the WiFi working but still no luck...
Click to expand...
Click to collapse
Means even with "stock firmware/radio/kernel/rom" wi-fi and bt aren't working?
LS.xD said:
Means even with "stock firmware/radio/kernel/rom" wi-fi and bt aren't working?
Click to expand...
Click to collapse
Yep, tried flashing JB OTA but it didnt help... Phone starts booting, it gets to the boot animation which is very laggy and then restarts...
Which recovery do you currently use? I use a "CWM based 6.0.5.0" one, not sure exactly which one it is I installed back then.
It seems to work fine, but I was just wondering if there was an update available somewhere?
+1 I want to kbow which is the best recovery should i use that will be work fine with no prop
THX