Ok.. The manufacturer finally release ICS for this tablet, it initially does not have gapps..... you need to install CWM and reboot into recovery through ADB... like i said you need to have CWM already installed!!!!! this works on ALL my tablets i just checked it out... it has market, gmail, and superuser. once it is installed you can access recovery by holding down volume:up and power until recovery shows up... ( before It could not be done)
here is the link and instructions for CWM:
http://forum.xda-developers.com/showthread.php?t=1378594
here is my nandroid:
http://www.2shared.com/file/HInNxhH1/2012-02-13143731.html
(i had to strip out google talk, it kept on giving me problems..)
on a side note you need a external card to access the nandroid, put it in /clockworkmod/backup/
i haven't tested anything else, ie can not load youtube app and not sure about video playback... netflix only plays sound not video...
if this helped you hit the like button.. i am poor and i only do this when i have time and out of love for this great device and OS.... i am not responsible if your wife leaves you or a natural disaster happens in your area or you brick that sucker.... flash at your own risk...
thanks goes out to everyone that made this possible... maybe i will see if i can port CM9 but don't hold me to that..
Good job, I was actually going to post this today as well until I searched to make sure no one else had already done it. CWM works great with this now that the capacitive buttons work, now to do some modding so we can get cm9 running on it. I still can't get netflix apk to stream, the sound works but no video.
ya i know! that sucks... i need to try to get a youtube app and push it to see if it works.. but i really love it... i wonder if i can try the momo9 cm9 and see what works and go from there.. but school and work keeps me busy as hell!!!
Google Talk works for me with "newtech25_for_ics4.0.3"- script
Google Talk does not work with anything I tried. Tried a lot of patches and versions. Any ideas ?
Try to reflash manufacture rom then newtech25_for_ics4.0.3 script.
i used this one http://www.sappasit.go.th/android/newtech25_for_ics4.0.3.zip
but if figured out there is bug in calendar sync with newtheck script. talk works also with video no problems at all
The gapps package I installed from clockwork mod had youtube in it and it works fine so I have no idea why netflix wouldn't work on ics when it was fine on the stock gb firmware.
what was the gapps package you used?
At this point two main issues
Market does not show system apps.
Some apps (google), even if installed from the Market gives a android system stop responding...
Update
Errors were due to Gapps not properly installed...
Small issue though Camera photos are up side down ?! Can anyone test it for me as well? as this may affect skype video calling ie.
Last thing to sort out Full market support and flash...
my camera works fine on mine, and i restored on 3 of the same tablets... i am working on finding a working google apps i guess... but everything works on mine. Weird, but i will lool for another ICS google apps and then do another nandroid. thanks for your feedback..
Use gapps v11 from CM9. Just flash them from CWM.
Sent from my Alldro Speed using xda premium
CWM on DVC Z7
Hi!
I've dot dvc z7 - its clon of ly-f1.
i try to inxtall cwm, but when i load recovery i can see ony icon and i cant see the menu.
what i do wrong?
sory for my english)
[email protected], if you are using gingerbread i have tried CWM on it and couldnt get it to work..... if on ICS try it again.... if it is a clone it should work.... unless they are using a different touchscreen driver or touchscreen???? i do not know off the top of my head...
web_ninja said:
[email protected], if you are using gingerbread i have tried CWM on it and couldnt get it to work..... if on ICS try it again.... if it is a clone it should work.... unless they are using a different touchscreen driver or touchscreen???? i do not know off the top of my head...
Click to expand...
Click to collapse
Im using last gb. 2.3.4 n all is worked. But if i install last ics from f1, touch keys isnt work and touchscreen is crazy when tablet charge.
hope next build of ics will work ok)
Sorry for the question.
Can i use CWM linked on first thread post for LY-F1?
They say only supported device is NOVO7 Advanced
Other thing, when i reboot into recovery from ROM Manager my tablet just boots normally, what's wrong?
releaser said:
Sorry for the question.
Can i use CWM linked on first thread post for LY-F1?
They say only supported device is NOVO7 Advanced
Other thing, when i reboot into recovery from ROM Manager my tablet just boots normally, what's wrong?
Click to expand...
Click to collapse
What version firmware you use?
may be cwm dont work with rom manager.
turn off ur tablet and press keys plus and power.
and cwm work with ics only.
[email protected] said:
What version firmware you use?
may be cwm dont work with rom manager.
turn off ur tablet and press keys plus and power.
and cwm work with ics only.
Click to expand...
Click to collapse
Thanks for the answer.
I'm on 2.3.4 from 20120107 when i press vol+ and power i only get a triangle with exclamation point inside and an android icon but nothing else.
So i need to flash ics first and then use cwm to flash the nandroid with gapps, right?
Regards
Hey I was trying to install CWM into my F1 and I cannot run the given scripts. It says permission denied. Any way to work this around?
It needs root. The easiest way is with Unlock Root.
Sent from my Nexus S using xda premium
As far as I know, the device comes pre rooted. I tried to root it again with superoneclick and it says it is already rooted.
Related
so i rooted my g2x with the one click methode and got su. then i did the one click clockwork mod recovery flash. when i press vol down and powere it takes me to clockworkmod recovery, but all of menu is red. is this normal? alsoafter downloading rom manager i flashed the recovery and made some back ups, but when i reenter rom mananager my backups are gone, when i load into recovery backups are there! seems like rom manger doesnt stay synced with phone. i am using eagleblood rom and when i try to power off phone it doesnt respond , so i have to take out battery! please help, any info is welcome! thanks.
not sure which way it goes.. but depending on which CWR you installed, it may be working off of your external card.. and rom manager is looking for backups on the internal.
just gotta connect usb and move the files or use some kinda file manager app.
emilianos said:
so i rooted my g2x with the one click methode and got su. then i did the one click clockwork mod recovery flash. when i press vol down and powere it takes me to clockworkmod recovery, but all of menu is red. is this normal? alsoafter downloading rom manager i flashed the recovery and made some back ups, but when i reenter rom mananager my backups are gone, when i load into recovery backups are there! seems like rom manger doesnt stay synced with phone. i am using eagleblood rom and when i try to power off phone it doesnt respond , so i have to take out battery! please help, any info is welcome! thanks.
Click to expand...
Click to collapse
ok im thinking you did the nvflash method which is good if you did since the menu is red(yes this is normal). your probably not going to see your backups unless you do it the volume down & power way. not sure why its not powering off. you may wanna trying down loading the eagleblood rom again booting into clockwork with the volume down method installing the rom that way and see if that works.
sounds like a hassle i probably wont even use rom manager any more. thanks for info
thanks for info ill just skip rom manager all together, which rom is the most stable in your opinion
emilianos said:
thanks for info ill just skip rom manager all together, which rom is the most stable in your opinion
Click to expand...
Click to collapse
I Would go with Dark or Light sinister rom 2.2.1, or the Ultimate rom 2.2.1. until the release gb sourse or until krylon drops bionix rc2 which is hopefully soon.
dligon said:
I Would go with Dark or Light sinister rom 2.2.1, or the Ultimate rom 2.2.1. until the release gb sourse or until krylon drops bionix rc2 which is hopefully soon.
Click to expand...
Click to collapse
At this point, as far as the most stable.. I agree.. anything w/ 2.2.1.. Most have been just sticking w/ stock because of many diff probs with 2.2.3/4. I think that's why the GB was 'leaked' a while ago. To help get some of these bugs brought to the surface.. and probably why we have seen the delay in launch. At least, I hope that's the case. I would not be shocked if they purposely leak these so they can watch the boards to see what probs are out there... Then spend a few weeks fixing it.
I'd have to agree that as far as using 'something' different, Bionix is good.. but it has its probs too. It has the typical reboots/locks up as most others have (excluding 2.2.1). Don't expect Bionix updates to be released like the others. They try to create a quality rom without doing "nightlies". Also, the dev is working on a 100 other projects. Not sure where the bionix priority is, but I'm sure it is not at the top of the list on a regular basis.
Seriously, from looking at how functional all of these releases are.. I think stock is your best option. After using Bionix for a few weeks now, I like it.. but the reboots/lockups are a pain.
Forgive the title, I need it to make it interesting to get some views. Now that's said, let me get to it.
I recently tried to flash MIUI onto my Samsung Infuse. I had Infused ROM v.2.2.3. I must have messed up because now I'm having trouble getting my phone to start. When I power on, it briefly shows the Samsung logo (for about 3 sec); then for split second an alternate screen flashes on my screen just before my phone shuts off. Now, I've tried to load CWM(red version) with the 2/3 button technique; however, I haven't been able to get into that GUI.
I have been able to get into the Download screen, for Odin. But, I was hoping there might be some sort of way to solve this problem without resetting my phone to stock.
Questions
1. Can I utilize the Download screen to re-implement or re-flash my ROMs on my phone; without loosing data
2. Is there a way that I can force my way into the CWM GUI?
3 If none of the above are possible, where can I get information Odin for the Infuse; and where can I download the program?
Thank you for reading, and thanks for the help in advance!
Joaquin
I wasn't going to reply to your thread but you caught me in a good mood. head over to the dev forum and you will find everything you need to get your phone back. That's all I'm goin to give you. the more you search and experiment the more you will learn
Already found somethings that are helping...
I didn't post for as a resource, just thought that if someone knew where to look they'd point me in the right place.
For anyone who might need a nudge; this link will direct you to complete recovery http://forum.xda-developers.com/showthread.php?t=1092021
Did you follow the directions exactly as it says? Did you ever get into blue cwm and flash miui a second time?
Sent from my SGH-I997
I wouldn't recommend MIUI to anyone who isn't atleast a little experienced in flashing ROMs, and are sure won't panic if they find their system soft bricked.
went to http://galnetmiui.co.uk/landing/weekly-builds/ downloaded infuse rom using miui build 112230 wiped data,cache,dalvik applied installed galnet miui rebooted does not load stays on samsung logo wiped data,cache,dalvik reinstalled galnet does not work, used blue cwm, returned phone to stock froyo, using odin reinstalled galnet using green cwm, still doesnt work, dont know what im doing wrong, please help, do i need to install gb bootloaders?
Sent from my SGH-I997 using xda premium
Okay so Im not that new with rooting androids or with using custom roms, so I'm not that much of a noob. The other day I decided since CM9 was in official nightlies I would give it a try. So I backed up my rom which was stock and rooted and I installed CM9 all through CWM recovery. Once in CM9 i notice the tablet wont connect to my phones tethering which is the only way I can get internet on it so I deciced to go back to my backup. But now on my backup the Wifi wont even turn on, anyideas why?
Hello,
I got exactly the same problem. I have installed CWM 5.5.0.4 and I tried CM9 nightly and return to Nandroid BackUp. Then no more wifi..
I tried to flash differents versions of stock kernels, but it was impossible to flash it : "Installation aborded"..
I used fastboot to install a new recovery : TWRP, but same problem : impossible to flash any kernels..
Does someone has the same problem? Or any idea to solve it?
Thank a lot !
Crystalyse
I also had another question...
is there any rom that will connect to Android tethering (ad-hoc)?
I was able to connect on stock rom rooted with cwm recovery but now every rom I tried so far wont connect to it.
Is there a way to work around this issue
I'm having similar problems, check this out:
http://forum.xda-developers.com/showthread.php?t=1438297
Going to try when I get home but other users are reporting this working for them.
KB Smoka said:
I'm having similar problems, check this out:
http://forum.xda-developers.com/showthread.php?t=1438297
Going to try when I get home but other users are reporting this working for them.
Click to expand...
Click to collapse
+1 That's the fix (WPA_Spullicant2) that worked for me. My TF300 just kept saying "Saved" when trying to connect to ad-hoc. Replaced the WPA_Supplicant2 file and all is working well.
It's a known issue with wifi not working on stock rooted nandroid backups. If you go back to stock, you will need to follow the step in this post from Xplod.
http://forum.xda-developers.com/showpost.php?p=26435786&postcount=2
meatrocket said:
+1 That's the fix (WPA_Spullicant2) that worked for me. My TF300 just kept saying "Saved" when trying to connect to ad-hoc. Replaced the WPA_Supplicant2 file and all is working well.
Click to expand...
Click to collapse
Sent from my ASUS Transformer Pad TF300T using XDA
Worked perfect....Thanks again for this.
Inc2.CM7.Condemned.Wireless.Tether.2.0.7
Good morning,
While not a noob to rooting or flashing (currently active on Galaxy tab 2 boards) I appear to have made a noob mistake, and even though I searched and read stickies, etc - still made the mistake.
I rooted the Rogers Infuse 4G using this thread http://forum.xda-developers.com/showthread.php?t=1197248 and it worked without issue.
Decided to try the enable lag fix option - deleted the voodoo file on the sd card, and rebooted the phone. Phone got stuck on SAMSUNG screen (unfortunately - did not notice that the volume was off on the phone) and I did not hear the "voice" telling me what was going on - so rebooted the phone by holding the power button until it rebooted.
Spent a couple of hours after that re-reading, and since I was able to get into download mode - was able to reflash stock package through odin. When the phone did finally reboot (thankfully, as this is my daughter's daily driver) I noticed there was already a voodoo file on the sd card, with another file inside named "logs" Just in case, I deleted that file, and added a new one called "disable-lagfix" as per the original instructions.
Just to be sure - went back and ran the rooting procedure, and can confirm that we have root.
From there, I decided to flash the 100% working CWM Recovery file through Rom Manager - found the details on this thread http://forum.xda-developers.com/showthread.php?t=1107881 and can confirm that after rebooting into recovery - the phone has CWM Version 2.5.1.2
The phone is currently fully functional, no issues with network or wifi, playstore, etc - but would like to know if anyone can confirm that we are good to go should we decide to upgrade to a custom rom. I've done so much reading - that the recovery version confuses me ( red or blue, etc). I realize that some of the threads are back from early to mid 2011 - so not sure if they are still completely valid - so am asking before proceeding.
Phone settings are the following:
Kernal 2.6.35.7-I997RUXKG3-CL366622
Build GB.UXKG3
Baseband I997RUXKG3
Firmware 2.3.3
CWM 2.5.1.2
Currently have the voodoo/disable-lagfix file on the sd card
If anyone has gotten this far into the thread - and can offer up some feedback or recommendations - it would be appreciated
Thanks in advance,
Bill
I usually don't trust Rom manager, but if you are able to boot to recovery then I would say you are good.
If you want the red one (don't remember the version) you could flash a custom kernel with sgs kernel flasher (available on play store).
Infusion should work for you
andros11 said:
I usually don't trust Rom manager, but if you are able to boot to recovery then I would say you are good.
If you want the red one (don't remember the version) you could flash a custom kernel with sgs kernel flasher (available on play store).
Infusion should work for you
Click to expand...
Click to collapse
Thanks for the reply - appreciate your time
Guess it's time to turn that volume up, delete the voodoo folder, and cross my fingers....
Just to confirm - do I delete the voodoo folder itself, or the disable-lagfix folder inside the voodoo folder only ?
Again, thanks
:good:
What were you planning on flashing?
You can probably leave it there for now, and after you have flashed then you can dispose of the folder.
Sent from my Transformer using xda app-developers app
andros11 said:
What were you planning on flashing?
You can probably leave it there for now, and after you have flashed then you can dispose of the folder.
Sent from my Transformer using xda app-developers app
Click to expand...
Click to collapse
First off andros11 - thank you so much for your time in replying to my issue.
My daughter has been looking over the development site - and,
as it stands right now, she has her mind set on the Dark Night Rom by VortexJunior.
Here is the link, if it helps http://forum.xda-developers.com/showthread.php?t=1662280
The install instructions, while relatively simple - and similar to what I am used to doing - but no mention of lagfix
Installation: From Gingerbread
1. Download Zip
2. Wipe Data/Factory Reset
3. Wipe Cache Partition
4. Flash
5. Reboot into recovery(Advanced>Reboot recovery)
6. Flash again
7.BAMM!
Thanks again for your time and replies,
Regards
Once on ICS I don't think you have to mind about lag-fix..
Also, I suggest you just reboot instead of rebooting into recovery. That often causes recovery bootloops.
When you reboot, the phone will hang at the kernel splash screen (this is normal). Just take out the battery, place it back in and boot into recovert with 3-finger combo (vol +, vol - and power, and let go when samsung logo pops up)
My personal suggestion is that you move on to JB. It performs much better, and mostly all development is now there.
Perfect - thanks
Am running CM 10.1 on my tablet, and love it
Will have my daughter research JB ROMs instead.....
Happy Holidays to you and your family
Regards,
sent from my GT-P3113 using Tapatalk 2
Lag fix??
I am confused.. what exactly is the lagg fix? My GF has a JB (one of phablet ROMS) installed and all the JB ROMS I have installed on this phone (and I think all ROMS besides JB) have had lagg problems. So I would really like to know how to fix this phone.
About that lagfix...
If I remember correctly voodoo lag fix was originally designed for the Galaxy S to change the file system it ran at to something that made the phone feel more responsive and access recourses quicker. It was ported to other ROMs so if a ROM includes it then you're ok to use it but I don't think you can just apply it to any JB ROM. Plus after using a GB ROM with this lagfix for some time, any 4.0 and above ROM I have used after that has been a LOT quicker in comparison. So I would probably look into the way you JB roms were installed maybe do a data wipe/factory wipe in CWM and reinstall the ROM from the beginning. What ROMs are you using exactly?
As the title says: P5110 keeps rebooting during boot - right after animation stops (before word SAMUNGS starts glowing).
Tablet is rooted and there is CWM 5.5.0.4 installed. Was just fine for almost half a year and all of a sudden this...
I have tried
- wipe data/factory reset
- wipe cache partition
- advanced : wipe Dalvik Cache (whatever that might be?)
I also tried all the "mounts and storage" options and noticed on thing: i can mount all storage mounts (/system, /cache, /data, /efs, /preload, /sdcard) but one - namely /emmc. Does it mean that emmc is broken? What is emmc? Is it important?
I am considering unrooting it and removing CWM. But not sure whether it's even possible and don't dare to try!
Can you tell me anything that might help me debrick this tablet?
Do you have nandroid backup(one that you make with cwm)? If yes go to backup and restore in cwm and hit restore....if not try to reflash rom via cwm or flash stock rom via odin in dowload mode.
emmc is.... http://www.simmtester.com/page/news/showpubnews.asp?num=181
Starojitski said:
As the title says: P5110 keeps rebooting during boot - right after animation stops (before word SAMUNGS starts glowing).
Tablet is rooted and there is CWM 5.5.0.4 installed. Was just fine for almost half a year and all of a sudden this...
I have tried
- wipe data/factory reset
- wipe cache partition
- advanced : wipe Dalvik Cache (whatever that might be?)
I also tried all the "mounts and storage" options and noticed on thing: i can mount all storage mounts (/system, /cache, /data, /efs, /preload, /sdcard) but one - namely /emmc. Does it mean that emmc is broken? What is emmc? Is it important?
I am considering unrooting it and removing CWM. But not sure whether it's even possible and don't dare to try!
Can you tell me anything that might help me debrick this tablet?
Click to expand...
Click to collapse
If you have nandroid backup.. Just restore it.. Or else download a stock firmware and flash it via odin.. gud luck:good:
flash another rom !!
mythi said:
flash another rom !!
Click to expand...
Click to collapse
Sorry to jump on this thread but might be a similar steps the OP has to take.
What if he flashes a new Rom and it still is locked in a strange boot up?
I posted a thread earlier today but either no one has an answer or my thread title was just crappy.
Mine did exactly what his is doing now (just boots the samsung logo and hangs) and now it just boots into recovery everytime you start it.
Flashing an original stock rom didnt fix it.
Flash via Odin any stock ROM then root it and flash whatever you like.
This kind of brick may occur easily if you have flashed uncompatible kernel or tried to restore nandroid backup of another ROM or made by uncompatible CWM recovery version.
Sent from my GT-P5110 using XDA Premium HD app
Solved?
dartd27 said:
Sorry to jump on this thread but might be a similar steps the OP has to take.
What if he flashes a new Rom and it still is locked in a strange boot up?
I posted a thread earlier today but either no one has an answer or my thread title was just crappy.
Mine did exactly what his is doing now (just boots the samsung logo and hangs) and now it just boots into recovery everytime you start it.
Flashing an original stock rom didnt fix it.
Click to expand...
Click to collapse
Normally, it should actually work absolutely fine if you flash a stock ROM via Odin.
Nobody knows what did cause your problems and what did you flash as last. Also, different OS versions use sometimes different partitions. Even CWM recovery is not compatible through all versions, it uses different formatting.
So this way should work to restore stock ROM on your device:
find and download Odin that fits your device (earlier versions are not neccessarily worse ones)
find and download PIT file for your device
find stock ROM for your device consisting 3-files (for PDA, Phone, CSC).... ROMs are usually zipped, so you will get 3 data after extracting
The PIT file will do re-partitions for the case that your formerly installed ROM used different partitions whch are not compatible with the stock ROM.
After that you will have again unrooted stock ROM. So just be careful afterwards whatever you flash and before you do it, make sure that whatever you flash always fits your device (no matter is it whole ROM, kernel or just upgrade).
tetakpatak said:
Normally, it should actually work absolutely fine if you flash a stock ROM via Odin.
Nobody knows what did cause your problems and what did you flash as last. Also, different OS versions use sometimes different partitions. Even CWM recovery is not compatible through all versions, it uses different formatting.
So this way should work to restore stock ROM on your device:
find and download Odin that fits your device (earlier versions are not neccessarily worse ones)
find and download PIT file for your device
find stock ROM for your device consisting 3-files (for PDA, Phone, CSC).... ROMs are usually zipped, so you will get 3 data after extracting
The PIT file will do re-partitions for the case that your formerly installed ROM used different partitions whch are not compatible with the stock ROM.
After that you will have again unrooted stock ROM. So just be careful afterwards whatever you flash and before you do it, make sure that whatever you flash always fits your device (no matter is it whole ROM, kernel or just upgrade).
Click to expand...
Click to collapse
Thank you for the reply. I had posted a link in here that linked to my thread that explained what i had done and used but it didnt show up for some reason? Anyway I used the below roms(in bold). An update was available for JB and we own two tablets both the P5113 and bought at the same time. One tablet updated fine but the other one would download the package but then would keep failing to install it. So i did a factory reset on the device and then that's when the fun began and it started booting strange.
So I first tried flashing the official JB rom using ODin 3.04.
P5113UECLK7 (4.1.1) - Cellular south November 2012 (Official)
and it still did the same thing so then i tried flashing it back to ICS which is the rom that was on there i think. (It was ICS but not sure if that was the exact version number?)
P5113UEBLI1 (4.0.4) - Singapore September 2012 (Official)
Im sure the roms are going on there fine as if im not mistaken ICS has a blue battery charge icon and JB a gold one. I noticed that it went from blue to gold when i first loaded the 4.1.1 on there and then back to blue when i put ICS back on there.
I cant seem to find a PIT file for the P5113. Only for the P5100. Would that work?
I tried it anyway and it didnt work
dartd27 said:
I cant seem to find a PIT file for the P5113. Only for the P5100. Would that work?
Click to expand...
Click to collapse
If I was you, I wouldn't flash it before I am 100% sure it fits the p5113. I own the p5110 and they are indeed very similar, but who knows.... Take care of your Tab, mate.
BTW: why not CM10.1 stable? It works awesome, full wipe/factory reset, install zip through recovery, install recent gapps for CM10.1 (4.2.2) and after boot install Apex launcher and enjoy life
Sent from my amazing i9000 running CM10.1 by pawitp
tetakpatak said:
If I was you, I wouldn't flash it before I am 100% sure it fits the p5113. I own the p5110 and they are indeed very similar, but who knows.... Take care of your Tab, mate.
BTW: why not CM10.1 stable? It works awesome, full wipe/factory reset, install zip through recovery, install recent gapps for CM10.1 (4.2.2) and after boot install Apex launcher and enjoy life
Sent from my amazing i9000 running CM10.1 by pawitp
Click to expand...
Click to collapse
I hear you Its a paper weight right now though so thought id rather try as nothing else is doing the trick.
The tablets are my kids so i preferred to just give them an official stock version. I got put off using custom roms when i used paranoid android on my samsung galaxy 2 and it was real buggy. I just need my devices to work for the basics. I now run stock jelly bean on my GS2 but even that has crappy battery life, lucky for it to make it till 4pm and still be on and thats with moderate use. Couple of phone calls and a few text messages and a tiny bit or browsing. I know what is causing it though as it only starts to lose battery when im not on wi fi. It at least doesnt freeze and stop receiving phone calls altogether like PA did though. I used to miss a ton of work calls because the phone had actually frozen.
I love Apex though. I have Apex pro on my GS2 and its much better then the standard launcher. My daughter has the GS3 and it still does not rotate on the home and app screens which i find annoying.
dartd27 said:
I got put off using custom roms when i used paranoid android on my samsung galaxy 2 and it was real buggy. I just need my devices to work for the basics.
Click to expand...
Click to collapse
I've got your point, mate. :good:
Same with me: I need all the functions to work. The CM10.1 does it really, but my p5110 is wifi-only device so I'm not sure if CM10.1 is same good for your p5113. CM10.2 seems to be smooth and fast, but many apps aren't yet updated for 4.3 so I will wait a while before I flash it again.
I have cm10.1 on my p5113...it runs amazing...the p5113 owners most of the time have to flash the p5110 version because there is nothing different with the tabs besides the ir port..
Sent from my GT-P5110 using xda app-developers app
help me
hello guys,
i have the same problem with my p3100
in my case i cannot connect my tablet to my laptop and it is always looping
i already install the driver, odin, and kies
i already root my tablet
can anyone help me please??
obeye said:
hello guys,
i have the same problem with my p3100
in my case i cannot connect my tablet to my laptop and it is always looping
i already install the driver, odin, and kies
i already root my tablet
can anyone help me please??
Click to expand...
Click to collapse
Can you describe it bit more precised, mate? Don't panic, so far it doesn't sound so bad....
tetakpatak said:
Can you describe it bit more precised, mate? Don't panic, so far it doesn't sound so bad....
Click to expand...
Click to collapse
okay, thanks mate
the problem is my tab always looping whenever I turn it off
I already try wipe at CMW mode,
but it is always restart and nothing happen and its still looping
I already try install the OS, but its aborted
i trying to flash it with Odin, but my laptop cannot read my tab
its been 3 day my tab cannot turn on
obeye said:
okay, thanks mate
the problem is my tab always looping whenever I turn it off
I already try wipe at CMW mode,
but it is always restart and nothing happen and its still looping
I already try install the OS, but its aborted
i trying to flash it with Odin, but my laptop cannot read my tab
its been 3 day my tab cannot turn on
Click to expand...
Click to collapse
Can you reach the download mode? (press 2 buttons at same time: volume down and power button)
OK, yes- you need same Odin version as Tabs 51xx, this is link for Odin 3.07:
http://hotfile.com/dl/161620048/6c6d559/Odin3_v3.07.rar.html
Try pressing the buttons with the charger plugged in, as well as plugged out, that is little trick with the p51xx Tabs
tetakpatak said:
Can you reach the download mode? (press 2 buttons at same time: volume down and power button)
OK, yes- you need same Odin version as Tabs 51xx, this is link for Odin 3.07:
Try pressing the buttons with the charger plugged in, as well as plugged out, that is little trick with the p51xx Tabs
Click to expand...
Click to collapse
Thanks mate!
already done!!
its work!
thank you so much!!
obeye said:
Thanks mate!
I already install ROM JB on my tab
but its still looping in samsung logo,
i read that i should install CWM, but when i install it, it says that "verification failed"
what should i do??
Click to expand...
Click to collapse
Great, I am glad to hear it did charger cable trick help?
Just to make sure: you must be sure to flash a stock ROM first (not JB based custom ROM), after it you will have revived Tab without root. After that normal proceeding: root it, install CWM recovery or custom kernel that fits your ROM (or even whole custom ROM) which already features the CWM recovery.
The stock recovery (3e) checks the signature so of course you can't flash any custom zips. CWM recovery has an option "toggle signature verification" where one can disable signature check. Then you can flash whatever you want, just take care that all you ever flash must be absolutely compatible for your device.
---------- Post added at 03:45 PM ---------- Previous post was at 03:21 PM ----------
obeye said:
Thanks mate!
I already install ROM JB on my tab
but its still looping in samsung logo,
i read that i should install CWM, but when i install it, it says that "verification failed"
what should i do??
Click to expand...
Click to collapse
One more thing mate, look at this video which I've posted on YouTube last January:
http://www.youtube.com/watch?v=0NXBN9Z63TY
It describes how to get rid of the signature verification problem. For the reason that quite many people don't understand english well, I have made a speechless video added by step by step description in the text (video description) so people can just copy the text and paste it into their translators.
If one ROM that you have flashed bootloops on the logo just try another ROM. It happens sometimes. Important is that you should always before flashing another ROM make full wipe: (data/factory reset/cache/dalvik) in your recovery mode.
Did you do it?
Please let me know if you were successful, it should work now! Good luck :fingers-crossed:
It works!
Thanks everyone for your feedback!!!
and my apologies for late response.
I followed the advise to (re)flash stock rom and it worked!
After that i rooted it again, installed another recovery and now have the latest stock rom working perfectly.
For those who get the same problem and the tabled keeps rebooting - just plug it into recharger and keep the on/off button until it turns off. Then you can fully charge it before you attempt to flash rom.
Once again, thanks a lot!
PS. now i am considering installing CM10.1
Starojitski said:
Thanks everyone for your feedback!!!
and my apologies for late response.
I followed the advise to (re)flash stock rom and it worked!
PS. now i am considering installing CM10.1
Click to expand...
Click to collapse
Great! Congratulations
Yes, install CM10.1.1 with gapps for 4.2.2 it works great, all the functions. Just mind that you can not restore nandroid backups made with other kernel, (sometimes also not if done with older CWM recovery version) and also apps backups made by Titanium backups in older systems aren't good idea to restore once you upgrade to CM10x
If you want to return for any reason to your old (current) ROM, do the same procedure like by unbricking