Related
I had rooted my Skyrocket and went back to stock a couple of days back using this Link
But now i cant perform OTA updates its goes to 25% and fails. I tried searching and came up with nothing that helped. so any help would be appreciated even link to thread if someone knows of any. thanks
Try again
Sent from my SAMSUNG-SGH-I727 using XDA
futureaccount said:
Try again
Sent from my SAMSUNG-SGH-I727 using XDA
Click to expand...
Click to collapse
Done it multiple times. it fails at 25% and when the phone boots up it says the update was interrupted
djteotancolis said:
Done it multiple times. it fails at 25% and when the phone boots up it says the update was interrupted
Click to expand...
Click to collapse
Did you also flash modem back to stock?
ka724ka said:
Did you also flash modem back to stock?
Click to expand...
Click to collapse
No i havnt, i thought odin does that?
let me seach for the stock modem, but will i be able to flash it now since im on stock
djteotancolis said:
No i havnt, i thought odin does that?
let me seach for the stock modem, but will i be able to flash it now since im on stock
Click to expand...
Click to collapse
No, you'll have to Odin cwm again. This is why I tell people to use the sammobile tar
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
xcrazydx said:
No, you'll have to Odin cwm again. This is why I tell people to use the sammobile tar
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
Thank you will get right on it
djteotancolis said:
I had rooted my Skyrocket and went back to stock a couple of days back using this Link
But now i cant perform OTA updates its goes to 25% and fails. I tried searching and came up with nothing that helped. so any help would be appreciated even link to thread if someone knows of any. thanks
Click to expand...
Click to collapse
I had the same problem after reverting to stock. I followed below procedure and am able to upgrade to 2.3.6.
"Use Kies. Open Kies without your phone plugged in. Go to tools, Firmware Upgrade and Initialization, enter your device info (in caps). It will then offer to reload your software. Follow the on screen instructions.
Once you're back on 2.3.5, you can OTA to 2.3.6, if you want."
djteotancolis said:
Thank you will get right on it
Click to expand...
Click to collapse
Let us know how it goes!
Sent from my SAMSUNG-SGH-I727 using XDA Premium App
i have Nexus S korean version (M200). Now, running ics 4.0.4(stock rom), and i try to check update Jeanbean. But i get " the system i currently up to date" . Cann't M200 update JB?? who can help me about this?? :crying:
I'm pretty sure that it's going to take a long time for KT to update to JB. M200's update is from KT not Google. That's why it takes more time for M200 than other variants. But you can always root and flash custom ROMs like me.
Sent from my Nexus S using Tapatalk
ljordan2 said:
I'm pretty sure that it's going to take a long time for KT to update to JB. M200's update is from KT not Google. That's why it takes more time for M200 than other variants. But you can always root and flash custom ROMs like me.
Sent from my Nexus S using Tapatalk
Click to expand...
Click to collapse
thank u very much.. hix, i think stock rom than better. but long time wait for update... i will update cook rom
JB on K200
ljordan2 said:
I'm pretty sure that it's going to take a long time for KT to update to JB. M200's update is from KT not Google. That's why it takes more time for M200 than other variants. But you can always root and flash custom ROMs like me.
Sent from my Nexus S using Tapatalk
Click to expand...
Click to collapse
Still there is no sight of JB on M200, therefore I have decided to try custom ROM meanwhile. Is that a safe bet?
Could you please help? (searched forum but could not find. still a noob here)
Nexus S [I9023] :4.0.4 :: MM200KRKC1:: IMM76D::Rooted
zeehere said:
Still there is no sight of JB on M200, therefore I have decided to try custom ROM meanwhile. Is that a safe bet?
Could you please help? (searched forum but could not find. still a noob here)
Nexus S [I9023] :4.0.4 :: MM200KRKC1:: IMM76D::Rooted
Click to expand...
Click to collapse
Yeah, you can try, M200 is almost same as i9020t, so no problem.
Sent from my Nexus S using Tapatalk 2
Articudos said:
Yeah, you can try, M200 is almost same as i9020t, so no problem.
Sent from my Nexus S using Tapatalk 2
Click to expand...
Click to collapse
Thanks,
Could you please help me with some links for downloading the custom ROM for M200
zeehere said:
Thanks,
Could you please help me with some links for downloading the custom ROM for M200
Click to expand...
Click to collapse
Can we flash any I9020 rom (available on Nexus S Android Development section) to Nexus S M200 (Korean) ?
zeehere said:
Thanks,
Could you please help me with some links for downloading the custom ROM for M200
Click to expand...
Click to collapse
ghanchi2000 said:
Can we flash any I9020 rom (available on Nexus S Android Development section) to Nexus S M200 (Korean) ?
Click to expand...
Click to collapse
Download any ROM(customROM for 3G), but if you flash stock ROM, use factory image(stock ROM) for I9020t/i9023.
Sent from my Nexus S using Tapatalk 2
Articudos said:
Download any ROM(customROM for 3G), but if you flash stock ROM, use factory image(stock ROM) for I9020t/i9023.
Sent from my Nexus S using Tapatalk 2
Click to expand...
Click to collapse
Thanks for all guidance.
I have managed to update my Nexus-S (M200-Korean) to Jelly Bean.
First I updated with the stock image of international version using this thread
http://forum.xda-developers.com/show...20&postcount=1
This changed the baseband version from M200 to XXXKl1
After reboot I was able to get 4.1.1 via OTA
I haven't seen any problems so far
Are there any that I may not have experienced yet?
[Nexus S][4.1.1][JRO03E]
zeehere said:
Thanks for all guidance.
I have managed to update my Nexus-S (M200-Korean) to Jelly Bean.
First I updated with the stock image of international version using this thread
http://forum.xda-developers.com/show...20&postcount=1
This changed the baseband version from M200 to XXXKl1
After reboot I was able to get 4.1.1 via OTA
I haven't seen any problems so far
Are there any that I may not have experienced yet?
[Nexus S][4.1.1][JRO03E]
Click to expand...
Click to collapse
Link: 404 page not found.:/
Radio compatitability depends on where u live.
If you experienced problem, look for this thread
http://forum.xda-developers.com/showthread.php?t=1116884
And flash krkc1 again.
If it's not compatitable, it can cause sudden signal drops and low mobile data speed.(afaik)
Sent from my Nexus S using Tapatalk 2
Thanks for the information. So far its been good. Will keep a watch.
Sent from my Nexus S using xda app-developers app
Correct the link
zeehere said:
Thanks for all guidance.
I have managed to update my Nexus-S (M200-Korean) to Jelly Bean.
First I updated with the stock image of international version using this thread
http://forum.xda-developers.com/show...20&postcount=1
This changed the baseband version from M200 to XXXKl1
After reboot I was able to get 4.1.1 via OTA
I haven't seen any problems so far
Are there any that I may not have experienced yet?
[Nexus S][4.1.1][JRO03E]
Click to expand...
Click to collapse
The link is wrong.Please post the correct link please.I have been using ics on m200 so far.Its good.I would like to know if you've experienced
any issues on JB?
This is the link. Follow only the first procedure. Then you would automatically get JB via OTA.
caution: it worked for me. May or may not work for you. As one senior member said in this post, it all depends on your location. (Country)
http://forum.xda-developers.com/showthread.php?t=1785672
So far I have not experienced any problems.
Sent from my Nexus S using xda app-developers app
Confirmation
zeehere said:
This is the link. Follow only the first procedure. Then you would automatically get JB via OTA.
caution: it worked for me. May or may not work for you. As one senior member said in this post, it all depends on your location. (Country)
http://forum.xda-developers.com/showthread.php?t=1785672
So far I have not experienced any problems.
Sent from my Nexus S using xda app-developers app
Click to expand...
Click to collapse
I am from Kolkata,India.Using m200 korean model.Have the same problem as the threadstarter.I guess when you're using it smoothly then inshallah,i too would.
Just to be pretty sure,you're telling me to follow ONLY this:
First up, let me tell you that doing this is not necessay to get the OTA or having a smooth JB experience. The JB OTA installs without a wipe which means the data is preserved.
UPDATE: Google has put up the full image for 4.1.1 [i9023, i9020a and i9020t] . Now you do not need to clean flash ICS and then JB. Follow the part 1 of the guide below and flash the JB image instead of ICS. Nothing more to it.
Thanks anshumandash for pointing it out
That being said, I wanted to have the real stock image on my Nexus S and then Upgrade to JellyBean. Below are the steps that I took.
Go to this GoogleAndroidImages page and download the appropriate image for your phone & download. Since mine is an international version a.k.a I9023, I chose that ROM.
The download will be a tar.gz file. Use a utility like 7Zip to uncompress it. The tar.gz will have a .tar file inside and the /tar file will have a folder. Extract the folder to your PC. For my download, the folder was named soju-imm76d
Next Steps will wipe your phone, completely
Reboot your phone into bootloader mode.
Open a command prompt, navigate to the folder in step 2.
Enter the below commands, the image file names are for my download, modify it to the file names in your folder before running (I assume that you have fastboot working)
fastboot flash bootloader bootloader-crespo-i9020xxkl1.img
fastboot reboot-bootloader
fastboot flash radio radio-crespo-i9020xxki1.img
fastboot reboot-bootloader
fastboot -w update image-soju-imm76d.zip
Click to expand...
Click to collapse
RIGHT?Meaning just the above process?
---------- Post added at 06:52 PM ---------- Previous post was at 06:47 PM ----------
also,this means it'll wipe all my data/apps/settings ? ?
Yes you too can try..
for me, after the first step , I rebooted a couple of times and automatically got JB via OTA.
Insha-Allah you should also get the same.
But proceed with caution and download factory ICS image from google.
Sent from my Nexus S using xda app-developers app
zeehere said:
Yes you too can try..
for me, after the first step , I rebooted a couple of times and automatically got JB via OTA.
Insha-Allah you should also get the same.
But proceed with caution and download factory ICS image from google.
Sent from my Nexus S using xda app-developers app
Click to expand...
Click to collapse
You dere?.i downloaded m200 again and installed it.Which one did you download?
soju ,sojua, or sojuk?
i guess i was supposed to download soju
Yes you should have downloaded soju. Sojuk is the same Korean one.
Sent from my Nexus S using xda app-developers app
Hi,
I recently updated my Atrix 2 to ICS (OTA). however now i am trying to flash supecharged atrix (SCV7) Rom,but it gives me a message saying "Signature verification failed"! what could be the possible reason?am i doing something wrong?
my phone is rooted and i tried both restoring and flashing the ROM but all in vain.I am Using the stock recovery as suggested in the forum.
please advise!
cheers!
thordroid said:
Hi,
I recently updated my Atrix 2 to ICS (OTA). however now i am trying to flash supecharged atrix (SCV7) Rom,but it gives me a message saying "Signature verification failed"! what could be the possible reason?am i doing something wrong?
my phone is rooted and i tried both restoring and flashing the ROM but all in vain.I am Using the stock recovery as suggested in the forum.
please advise!
cheers!
Click to expand...
Click to collapse
Questions belong in the Q&A Section.
The signature verification failed because SCV7 is based on our ICS leak. Which is TOTALLY different than the OTA update you recieved. There are currently no ROMs available for the firmware you are on.
thordroid said:
Hi,
I recently updated my Atrix 2 to ICS (OTA). however now i am trying to flash supecharged atrix (SCV7) Rom,but it gives me a message saying "Signature verification failed"! what could be the possible reason?am i doing something wrong?
my phone is rooted and i tried both restoring and flashing the ROM but all in vain.I am Using the stock recovery as suggested in the forum.
please advise!
cheers!
Click to expand...
Click to collapse
You should be flashing SCV7 though bootmenu bootstrap. or other cwm based recovery... not stock
farshad525hou said:
You should be flashing SCV7 though bootmenu bootstrap. or other cwm based recovery... not stock
Click to expand...
Click to collapse
Lol farshad, you're so right. I didn't even read that part of his post.
Fall the Moron.... Lol.
Sent from my SAMSUNG-SGH-I727 using xda premium
thordroid said:
Hi,
I recently updated my Atrix 2 to ICS (OTA). however now i am trying to flash supecharged atrix (SCV7) Rom,but it gives me a message saying "Signature verification failed"! what could be the possible reason?am i doing something wrong?
my phone is rooted and i tried both restoring and flashing the ROM but all in vain.I am Using the stock recovery as suggested in the forum.
please advise!
cheers!
Click to expand...
Click to collapse
Possibly that rom is only for the leak ics not for the ota? And you dont use stock recovery you have to use bootmenu or safestrap to install.
willyyumm27 said:
Possibly that rom is only for the leak ics not for the ota? And you dont use stock recovery you have to use bootmenu or safestrap to install.
Click to expand...
Click to collapse
i did try.i guess i softbricked my phone i installed the atrix bootstrap wiped cache,factory reset and tried to flash SCV7.
it said install successful but now when rebooted.i get this AP flashboot screen(boot failure) message.
do i need flash the OTA update via RSD lite? please advice!
thordroid said:
i did try.i guess i softbricked my phone i installed the atrix bootstrap wiped cache,factory reset and tried to flash SCV7.
it said install successful but now when rebooted.i get this AP flashboot screen(boot failure) message.
do i need flash the OTA update via RSD lite? please advice!
Click to expand...
Click to collapse
If you're coming from the official OTA for ICS, and tried to flash SCv7 (which is based on our AT&T leak) you likely have soft bricked your device. You cannot flash an unofficial leak version of a ROM to an official ICS ROM, you should have thought this through a little better. I'm sorry to say, but you're probably S.O.L. (Google that, if needed)...
Apex_Strider said:
If you're coming from the official OTA for ICS, and tried to flash SCv7 (which is based on our AT&T leak) you likely have soft bricked your device. You cannot flash an unofficial leak version of a ROM to an official ICS ROM, you should have thought this through a little better. I'm sorry to say, but you're probably S.O.L. (Google that, if needed)...
Click to expand...
Click to collapse
Its just the system+data naa??..so how come he cant flash it??
Sent from my MB865 using xda app-developers app
is there no way out?
devilhunter47 said:
Its just the system+data naa??..so how come he cant flash it??
Sent from my MB865 using xda app-developers app
Click to expand...
Click to collapse
Oh Cmon! is there really no way out?i just got this phone last month..there must be something i could do!
wouldnt the leak work if i try Fxz ing it through RSD LITE?
can i FXZ this to 2.3.5? would that be of help?
thordroid said:
Oh Cmon! is there really no way out?i just got this phone last month..there must be something i could do!
wouldnt the leak work if i try Fxz ing it through RSD LITE?
Click to expand...
Click to collapse
Dont ever try to fxz from ota ics to gb..you'll hard brick
Sent from my MB865 using xda app-developers app
No you cannot fxz back from the official ota. You're bricked mate, sorry dude, send in for a replacement.
While you're at it read the sticky in the general section about why we all recommend to NOT to OTA to ICS.
There have been many warnings about this for over month.
Best of luck to you.
Sent from my SAMSUNG-SGH-I727 using xda premium
Atrix 2 brick
I've bricked my atrix 2 and reinstalled the original rom with an application from Motorola that let me force the original back on my device. But I did not have ics. So I'll look up the application and the original rom. Later tonight or tomorrow.
You can FXZ from ICS to GB
Fall of Enosis said:
No you cannot fxz back from the official ota. You're bricked mate, sorry dude, send in for a replacement.
While you're at it read the sticky in the general section about why we all recommend to NOT to OTA to ICS.
There have been many warnings about this for over month.
Best of luck to you.
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
Hey wat up?
I wasnt sure if this would work but since my phone was already soft bricked i thought of giving it a shot anyways and tried jimbridgmans utility to get back to GB from ICS..and Guess what?? it worked and My phone is back to Life !!!
Here is the thread :
http://forum.xda-developers.com/showthread.php?t=1805975
I am from INDIA, the script in the thread would flash US ATT version.I am going to FXZ the ASIA Retail version tonight and take it from there.
thanks a bunch for the help guys. Cheers!
thordroid said:
Hey wat up?
I wasnt sure if this would work but since my phone was already soft bricked i thought of giving it a shot anyways and tried jimbridgmans utility to get back to GB from ICS..and Guess what?? it worked and My phone is back to Life !!!
Here is the thread :
http://forum.xda-developers.com/showthread.php?t=1805975
I am from INDIA, the script in the thread would flash US ATT version.I am going to FXZ the ASIA Retail version tonight and take it from there.
thanks a bunch for the help guys. Cheers!
Click to expand...
Click to collapse
no dont cross flash..you'll end up with a hard brick
Fall of Enosis said:
No you cannot fxz back from the official ota. You're bricked mate, sorry dude, send in for a replacement.
While you're at it read the sticky in the general section about why we all recommend to NOT to OTA to ICS.
There have been many warnings about this for over month.
Best of luck to you.
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
Thanks a lot mate!
It is due to recommendation of you guys that I'm still on GB, which is quite snappier than ICS. :good:
I am going to stick with GB too,no more flashing until a stable CM 10 is out
Sent from my MB865 using xda app-developers app
HI everyone, i was just trying to revive my phone out of the invalid cg errors, and i couldnt so i decided to flash 2.3.6 through rsd.
Before that i did the cwm on boot option as well as per the guide, now it has flashed to 20/20 flash webtop gfrs.img and it has been 20 mins at that step, what do i do now? does the battery keep draining? do i unplg it?
Please reply before my battery might run out :s
Im no expert, but i can definitely say that unplugging or pulling battery will brick your phone. Dont do that. The battery does not charge in fastboot mode so yes it is draining. Wait it out a bit.. my best advice. Sorry!
Sent from my MB865
if you were on 2.3.6 then you have to read the beginners guide once again as you will have to replace song files to the rom and it would work like a charm i was stucked too yesterday
So you flashed a stock 2.3.6 from? If it was any ICS build, you just hard bricked for being unable to see about the million warnings of not doing so or ending up with a brick...
Perhaps you should provide more information of exactly what you were doing, and exactly what software you were using.....
Sent from my MB865 using Tapatalk 2
hi_john said:
if you were on 2.3.6 then you have to read the beginners guide once again as you will have to replace song files to the rom and it would work like a charm i was stucked too yesterday
Click to expand...
Click to collapse
Song files?
fireforhire said:
So you flashed a stock 2.3.6 from? If it was any ICS build, you just hard bricked for being unable to see about the million warnings of not doing so or ending up with a brick...
Perhaps you should provide more information of exactly what you were doing, and exactly what software you were using.....
Sent from my MB865 using Tapatalk 2
Click to expand...
Click to collapse
I had 2.3.5, i did the cwm on boot and it sent me to 2.3.6 now at 2.3.6 i just flashed a stock 2.3.6 with rsd lite 5.6 and it is still at 20/20 after about an hour.
What is a cwm on boot?
Sent from my MB865 using Tapatalk 2
---------- Post added at 03:34 PM ---------- Previous post was at 03:30 PM ----------
Also, did you EVER have ANY ICS leak on this phone?
Sent from my MB865 using Tapatalk 2
fireforhire said:
What is a cwm on boot?
Sent from my MB865 using Tapatalk 2
---------- Post added at 03:34 PM ---------- Previous post was at 03:30 PM ----------
Also, did you EVER have ANY ICS leak on this phone?
Sent from my MB865 using Tapatalk 2
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1511616
Ok, so you installed that modded bootstrap... That alone would not magically put you on 2.3.6 from 2.3.5. You would have either flashed it, or ota'ed from 2.3.5.
So I'll ask again, exactly what were you doing. And again, WERE YOU EVER ON ICS.
Sent from my MB865 using Tapatalk 2
fireforhire said:
Ok, so you installed that modded bootstrap... That alone would not magically put you on 2.3.6 from 2.3.5. You would have either flashed it, or ota'ed from 2.3.5.
So I'll ask again, exactly what were you doing. And again, WERE YOU EVER ON ICS.
Sent from my MB865 using Tapatalk 2
Click to expand...
Click to collapse
Never ics and this is the second time that i applied the reboot.zip and its sent me to 2.3.6
so do i just wait it out till the battery dies?
That doesn't make any sense.... Flashing that in cwm would not apply the 2.3.6 update to 2.3.5.....
From what I can tell you will probably softbrick due to not doing something right.
If I were you, I'd pull the battery and see if the phone will boot into fastboot. Then reflash using the official 2.3.5 fxz, then ota to 2.3.6.(that guide you're using is 10 months old...) You can also use the leakes 2.3.6 fxz.
I'm doing this from my phone, so it's cumbersome to include links to the file, but all the info is in most of the recent posts here, and in the dev forum.
Sent from my MB865 using Tapatalk 2
fireforhire said:
That doesn't make any sense.... Flashing that in cwm would not apply the 2.3.6 update to 2.3.5.....
From what I can tell you will probably softbrick due to not doing something right.
If I were you, I'd pull the battery and see if the phone will boot into fastboot. Then reflash using the official 2.3.5 fxz, then ota to 2.3.6.(that guide you're using is 10 months old...) You can also use the leakes 2.3.6 fxz.
I'm doing this from my phone, so it's cumbersome to include links to the file, but all the info is in most of the recent posts here, and in the dev forum.
Sent from my MB865 using Tapatalk 2
Click to expand...
Click to collapse
Well i guess there isint much else to it then, but i have had this problem before of going 2.3.5 to 2.3.6 and i guess nobody else has or there would be threads here... i guess i got a wierd phone pulling battery in next 15 mins just to see if anyone else has something to add.
Probably not, since then you won't be able to boot with a dead battery. Pulling the battery now or waiting for it to die is the samething.... At least you won't be stuck with a completely dead batt.
Sent from my MB865 using Tapatalk 2
fireforhire said:
Probably not, since then you won't be able to boot with a dead battery. Pulling the battery now or waiting for it to die is the samething.... At least you won't be stuck with a completely dead batt.
Sent from my MB865 using Tapatalk 2
Click to expand...
Click to collapse
But i can still charge the battery i guess... and i have someone else with a atrix 2 so iam good there as well for charging or using their battery
RaXxaa said:
Well i guess there isint much else to it then, but i have had this problem before of going 2.3.5 to 2.3.6 and i guess nobody else has or there would be threads here... i guess i got a wierd phone pulling battery in next 15 mins just to see if anyone else has something to add.
Click to expand...
Click to collapse
I still don't understand your process of going to 2.3.6 from 2.3.5.
Why are you even rooting 2.3.5 just to attempt to go to 2.3.6.......? Unless you're a dev trying to unlock the bootloader from 2.3.5 somehow, it makes absolutely 0 sense of why you are rooting and backing up 2.3.5...........
You should be ota'ing from 2.3.5 to 2.3.6....
Sent from my MB865 using Tapatalk 2
fireforhire said:
I still don't understand your process of going to 2.3.6 from 2.3.5.
Why are you even rooting 2.3.5 just to attempt to go to 2.3.6.......? Unless you're a dev trying to unlock the bootloader from 2.3.5 somehow, it makes absolutely 0 sense of why you are rooting and backing up 2.3.5...........
You should be ota'ing from 2.3.5 to 2.3.6....
Sent from my MB865 using Tapatalk 2
Click to expand...
Click to collapse
Was having a unsolveable Invalid cg error of boot recovery and the 2 others, the invalid cg showed up because i had went from 2.3.5 to 2.3.6 the first time before
RaXxaa said:
Was having a unsolveable Invalid cg error of boot recovery and the 2 others, the invalid cg showed up because i had went from 2.3.5 to 2.3.6 the first time before
Click to expand...
Click to collapse
That makes no sense what you are saying.... All I can suggest is what I've already said...
If you're trying to get your phone back to stock, you need to just flash the stock 2.3.5 from fastboot, then ota directly to 2.3.6 using the update utility in android.........
Sent from my MB865 using Tapatalk 2
fireforhire said:
That makes no sense what you are saying.... All I can suggest is what I've already said...
If you're trying to get your phone back to stock, you need to just flash the stock 2.3.5 from fastboot, then ota directly to 2.3.6 using the update utility in android.........
Sent from my MB865 using Tapatalk 2
Click to expand...
Click to collapse
So i disconnected the phone, i guess my battery went lower than 3v but its still charging now hopefully not alot of damage....
I did the stock 2.3.5 and its charging atm... hopefully i can get rid of the invalid cg errors...
Although is it an odd time for a post? nobody seems to be pitchin in..
RaXxaa said:
So i disconnected the phone, i guess my battery went lower than 3v but its still charging now hopefully not alot of damage....
I did the stock 2.3.5 and its charging atm... hopefully i can get rid of the invalid cg errors...
Although is it an odd time for a post? nobody seems to be pitchin in..
Click to expand...
Click to collapse
Do you have an ME865 or an MB865 and what region is it (SEARET, MEARET, HKTW, etc...)?
Sent from my MB865 using xda premium
My atrix 2 was 4.0.4 ics and it was only force closing and not responding so i decided to flash the at&t 2.3.5 stock firmware i got a error in rsd 5.6 which said 5/23 and some other things...the phone will not boot into fastboot ap or anything the only sign of life i get is a white led when plugged into the pc but it doesnt show up in rsd!
PLEASE HELP!!!!
lgphoenix10 said:
My atrix 2 was 4.0.4 ics and it was only force closing and not responding so i decided to flash the at&t 2.3.5 stock firmware i got a error in rsd 5.6 which said 5/23 and some other things...the phone will not boot into fastboot ap or anything the only sign of life i get is a white led when plugged into the pc but it doesnt show up in rsd!
PLEASE HELP!!!!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1937112
jimbridgman said:
http://forum.xda-developers.com/showthread.php?t=1937112
Click to expand...
Click to collapse
is there any way to fix this please help reply asap!!!
jimbridgman said:
http://forum.xda-developers.com/showthread.php?t=1937112
Click to expand...
Click to collapse
He lives on..
Good to see you around again, Jim.
Sent from my MB865 using xda app-developers app
alteredlikeness said:
He lives on..
Good to see you around again, Jim.
Sent from my MB865 using xda app-developers app
Click to expand...
Click to collapse
Yep, I am back. Ubuntu is slow for a bit, and the dev phone trade is all worked out now, so... I am back.
I am working on a fresh kexec kernel from scratch, for the a2, based on the moto released code.
lgphoenix10 said:
is there any way to fix this please help reply asap!!!
Click to expand...
Click to collapse
By flashing 2.3.5 firmware on top of 4.0.4, you have most likely hard bricked your device and it will be near impossible to fix. Moto made certain that there is no downgrading..
Sent from my MB865 using xda app-developers app
---------- Post added at 09:28 PM ---------- Previous post was at 09:22 PM ----------
jimbridgman said:
Yep, I am back. Ubuntu is slow for a bit, and the dev phone trade is all worked out now, so... I am back.
I am working on a fresh kexec kernel from scratch, for the a2, based on the moto released code.
Click to expand...
Click to collapse
Great to hear - we could use the help..
So, you pulled it from sourceforge? Is that the kernel source for Asia retail ICS, right?
Sent from my MB865 using xda app-developers app
alteredlikeness said:
Great to hear - we could use the help..
So, you pulled it from sourceforge? Is that the kernel source for Asia retail ICS, right?
Sent from my MB865 using xda app-developers app
Click to expand...
Click to collapse
Yes it is from sourceforge, but there is an mb865 version out there too. The mb version is labeled incorrectly. It is the SEARET mb865 version of the kernel. All that needs to be paid attention to is the WiFi, video, and GPS kernel modules &/ drivers.
Now, it is not ATT based, but that should not be an issue.
You are Super hard bricked
lgphoenix10 said:
My atrix 2 was 4.0.4 ics and it was only force closing and not responding so i decided to flash the at&t 2.3.5 stock firmware i got a error in rsd 5.6 which said 5/23 and some other things...the phone will not boot into fastboot ap or anything the only sign of life i get is a white led when plugged into the pc but it doesnt show up in rsd!
PLEASE HELP!!!!
Click to expand...
Click to collapse
if your mobile is under warranty then go n request for replacement....There is no way to back. AT&T bootloader are locked and never gives the permission for downgrade. You are Super hard bricked.
so theres no way i can fix it ?
amanindia said:
if your mobile is under warranty then go n request for replacement....There is no way to back. AT&T bootloader are locked and never gives the permission for downgrade. You are Super hard bricked.
Click to expand...
Click to collapse
so theres no way i can fix it? nothing i can try? please help!
bought it from a friend unlocked so i cant return it to motorola
Nope, you can use it as a deluxe paper weight.