HI everyone, i was just trying to revive my phone out of the invalid cg errors, and i couldnt so i decided to flash 2.3.6 through rsd.
Before that i did the cwm on boot option as well as per the guide, now it has flashed to 20/20 flash webtop gfrs.img and it has been 20 mins at that step, what do i do now? does the battery keep draining? do i unplg it?
Please reply before my battery might run out :s
Im no expert, but i can definitely say that unplugging or pulling battery will brick your phone. Dont do that. The battery does not charge in fastboot mode so yes it is draining. Wait it out a bit.. my best advice. Sorry!
Sent from my MB865
if you were on 2.3.6 then you have to read the beginners guide once again as you will have to replace song files to the rom and it would work like a charm i was stucked too yesterday
So you flashed a stock 2.3.6 from? If it was any ICS build, you just hard bricked for being unable to see about the million warnings of not doing so or ending up with a brick...
Perhaps you should provide more information of exactly what you were doing, and exactly what software you were using.....
Sent from my MB865 using Tapatalk 2
hi_john said:
if you were on 2.3.6 then you have to read the beginners guide once again as you will have to replace song files to the rom and it would work like a charm i was stucked too yesterday
Click to expand...
Click to collapse
Song files?
fireforhire said:
So you flashed a stock 2.3.6 from? If it was any ICS build, you just hard bricked for being unable to see about the million warnings of not doing so or ending up with a brick...
Perhaps you should provide more information of exactly what you were doing, and exactly what software you were using.....
Sent from my MB865 using Tapatalk 2
Click to expand...
Click to collapse
I had 2.3.5, i did the cwm on boot and it sent me to 2.3.6 now at 2.3.6 i just flashed a stock 2.3.6 with rsd lite 5.6 and it is still at 20/20 after about an hour.
What is a cwm on boot?
Sent from my MB865 using Tapatalk 2
---------- Post added at 03:34 PM ---------- Previous post was at 03:30 PM ----------
Also, did you EVER have ANY ICS leak on this phone?
Sent from my MB865 using Tapatalk 2
fireforhire said:
What is a cwm on boot?
Sent from my MB865 using Tapatalk 2
---------- Post added at 03:34 PM ---------- Previous post was at 03:30 PM ----------
Also, did you EVER have ANY ICS leak on this phone?
Sent from my MB865 using Tapatalk 2
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1511616
Ok, so you installed that modded bootstrap... That alone would not magically put you on 2.3.6 from 2.3.5. You would have either flashed it, or ota'ed from 2.3.5.
So I'll ask again, exactly what were you doing. And again, WERE YOU EVER ON ICS.
Sent from my MB865 using Tapatalk 2
fireforhire said:
Ok, so you installed that modded bootstrap... That alone would not magically put you on 2.3.6 from 2.3.5. You would have either flashed it, or ota'ed from 2.3.5.
So I'll ask again, exactly what were you doing. And again, WERE YOU EVER ON ICS.
Sent from my MB865 using Tapatalk 2
Click to expand...
Click to collapse
Never ics and this is the second time that i applied the reboot.zip and its sent me to 2.3.6
so do i just wait it out till the battery dies?
That doesn't make any sense.... Flashing that in cwm would not apply the 2.3.6 update to 2.3.5.....
From what I can tell you will probably softbrick due to not doing something right.
If I were you, I'd pull the battery and see if the phone will boot into fastboot. Then reflash using the official 2.3.5 fxz, then ota to 2.3.6.(that guide you're using is 10 months old...) You can also use the leakes 2.3.6 fxz.
I'm doing this from my phone, so it's cumbersome to include links to the file, but all the info is in most of the recent posts here, and in the dev forum.
Sent from my MB865 using Tapatalk 2
fireforhire said:
That doesn't make any sense.... Flashing that in cwm would not apply the 2.3.6 update to 2.3.5.....
From what I can tell you will probably softbrick due to not doing something right.
If I were you, I'd pull the battery and see if the phone will boot into fastboot. Then reflash using the official 2.3.5 fxz, then ota to 2.3.6.(that guide you're using is 10 months old...) You can also use the leakes 2.3.6 fxz.
I'm doing this from my phone, so it's cumbersome to include links to the file, but all the info is in most of the recent posts here, and in the dev forum.
Sent from my MB865 using Tapatalk 2
Click to expand...
Click to collapse
Well i guess there isint much else to it then, but i have had this problem before of going 2.3.5 to 2.3.6 and i guess nobody else has or there would be threads here... i guess i got a wierd phone pulling battery in next 15 mins just to see if anyone else has something to add.
Probably not, since then you won't be able to boot with a dead battery. Pulling the battery now or waiting for it to die is the samething.... At least you won't be stuck with a completely dead batt.
Sent from my MB865 using Tapatalk 2
fireforhire said:
Probably not, since then you won't be able to boot with a dead battery. Pulling the battery now or waiting for it to die is the samething.... At least you won't be stuck with a completely dead batt.
Sent from my MB865 using Tapatalk 2
Click to expand...
Click to collapse
But i can still charge the battery i guess... and i have someone else with a atrix 2 so iam good there as well for charging or using their battery
RaXxaa said:
Well i guess there isint much else to it then, but i have had this problem before of going 2.3.5 to 2.3.6 and i guess nobody else has or there would be threads here... i guess i got a wierd phone pulling battery in next 15 mins just to see if anyone else has something to add.
Click to expand...
Click to collapse
I still don't understand your process of going to 2.3.6 from 2.3.5.
Why are you even rooting 2.3.5 just to attempt to go to 2.3.6.......? Unless you're a dev trying to unlock the bootloader from 2.3.5 somehow, it makes absolutely 0 sense of why you are rooting and backing up 2.3.5...........
You should be ota'ing from 2.3.5 to 2.3.6....
Sent from my MB865 using Tapatalk 2
fireforhire said:
I still don't understand your process of going to 2.3.6 from 2.3.5.
Why are you even rooting 2.3.5 just to attempt to go to 2.3.6.......? Unless you're a dev trying to unlock the bootloader from 2.3.5 somehow, it makes absolutely 0 sense of why you are rooting and backing up 2.3.5...........
You should be ota'ing from 2.3.5 to 2.3.6....
Sent from my MB865 using Tapatalk 2
Click to expand...
Click to collapse
Was having a unsolveable Invalid cg error of boot recovery and the 2 others, the invalid cg showed up because i had went from 2.3.5 to 2.3.6 the first time before
RaXxaa said:
Was having a unsolveable Invalid cg error of boot recovery and the 2 others, the invalid cg showed up because i had went from 2.3.5 to 2.3.6 the first time before
Click to expand...
Click to collapse
That makes no sense what you are saying.... All I can suggest is what I've already said...
If you're trying to get your phone back to stock, you need to just flash the stock 2.3.5 from fastboot, then ota directly to 2.3.6 using the update utility in android.........
Sent from my MB865 using Tapatalk 2
fireforhire said:
That makes no sense what you are saying.... All I can suggest is what I've already said...
If you're trying to get your phone back to stock, you need to just flash the stock 2.3.5 from fastboot, then ota directly to 2.3.6 using the update utility in android.........
Sent from my MB865 using Tapatalk 2
Click to expand...
Click to collapse
So i disconnected the phone, i guess my battery went lower than 3v but its still charging now hopefully not alot of damage....
I did the stock 2.3.5 and its charging atm... hopefully i can get rid of the invalid cg errors...
Although is it an odd time for a post? nobody seems to be pitchin in..
RaXxaa said:
So i disconnected the phone, i guess my battery went lower than 3v but its still charging now hopefully not alot of damage....
I did the stock 2.3.5 and its charging atm... hopefully i can get rid of the invalid cg errors...
Although is it an odd time for a post? nobody seems to be pitchin in..
Click to expand...
Click to collapse
Do you have an ME865 or an MB865 and what region is it (SEARET, MEARET, HKTW, etc...)?
Sent from my MB865 using xda premium
Related
OK guys since there is a large number of users getting update fever im gonna make this as a means to keep the repeats down hopefully you will all read it and understand.
first off if you are on 2.3.5 you will have an update ota to 2.3.6
if you are on 2.3.6 currently there is no update (i will update the op if this changes)
rules you must be on 2.3.6 stock with stock recovery as well no apps frozen or debloated to get the update (op will change if i am wrong)
on 2.3.6 there is a glitch saying that you have an update available it is wrong you will try it may attempt a dl even but you will not get all the way.
so heres what we need if you take an update and meet all these criteria and it downloads and installs and you see in the about phone section that its 4.0.whatever then you can post i will ask whever takes it gets a stock nand preferably unrooted and rooted this will cut down on the number of posts and help the mods ok thank you for your time
Bump I wont let this get burried
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
as of 2:56 PST
2.3.5 must have the glitch also as that's what i have and I get the same messages. It wont even update to 2.3.6 as I believe AT&T is getting their system ready to put out the 4.0 whatever. Whatever the actual case maybe it can not be to far off now.
I was just tired of the same thread 500 times so I decided to try this
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
pcidiot said:
2.3.5 must have the glitch also as that's what i have and I get the same messages. It wont even update to 2.3.6 as I believe AT&T is getting their system ready to put out the 4.0 whatever. Whatever the actual case maybe it can not be to far off now.
Click to expand...
Click to collapse
If you want 2.3.6 stock download official tar from sammobile
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
another round of leaks, then once all the xda devs fix all the bugs in that leak they should be good to release. ;P. why else would there be so many leaks?
True but I'm on here all the time so I'm tired of the update fever threads
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
I think Sammobile still has 2.3.5 but its nothing to flash it and OTA update to 2.3.6. I did this a few weeks back being bored.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
nrm5110 said:
True but I'm on here all the time so I'm tired of the update fever threads
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
Me too, man
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
nrm5110 said:
If you want 2.3.6 stock download official tar from sammobile
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
Thanks but no thanks, definitely not looking for 2.3.6 well maybe when At&t releases ICS as I know my phone wont upgrade the way it is right now. LOL
Tars and Odin make all issues go bye bye
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
nrm5110 said:
Tars and Odin make all issues go bye bye
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
Can't I just Unroot with superoneclick as that is what I used to get root? Or would I have issues updating afterwords?
pcidiot said:
Can't I just Unroot with superoneclick as that is what I used to get root? Or would I have issues updating afterwords?
Click to expand...
Click to collapse
you'd be better of just flashing a stock tar.
everything needs to be perfectly untouched to update.
OFWGKTADGAF said:
you'd be better of just flashing a stock tar.
everything needs to be perfectly untouched to update.
Click to expand...
Click to collapse
Alright flash stock, then unroot via superoneclick.
pcidiot said:
Alright flash stock, then unroot via superoneclick.
Click to expand...
Click to collapse
Name says it all....but...... if you flash stock you're already not rooted.
pcidiot said:
Alright flash stock, then unroot via superoneclick.
Click to expand...
Click to collapse
No need, stock tar isn't rooted
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
I'm going to flash stock, update to 2.3.6 and stay there for a week.
Anyone placing bets we do get a drop? We can bet in thanks. 10 says no drop.
Uncle Irish said:
Name says it all....but...... if you flash stock you're already not rooted.
Click to expand...
Click to collapse
xcrazydx said:
No need, stock tar isn't rooted
Click to expand...
Click to collapse
Right, sorry for that this should have been a given. Just a little tired, worked midnights and have not slept yet.
Thank goodness it urks me when I see a thread about an update. I predict an official update next week. Around Tues or wed
Chimaira Android 4.0.4 (Beta2)
Hi,
I recently updated my Atrix 2 to ICS (OTA). however now i am trying to flash supecharged atrix (SCV7) Rom,but it gives me a message saying "Signature verification failed"! what could be the possible reason?am i doing something wrong?
my phone is rooted and i tried both restoring and flashing the ROM but all in vain.I am Using the stock recovery as suggested in the forum.
please advise!
cheers!
thordroid said:
Hi,
I recently updated my Atrix 2 to ICS (OTA). however now i am trying to flash supecharged atrix (SCV7) Rom,but it gives me a message saying "Signature verification failed"! what could be the possible reason?am i doing something wrong?
my phone is rooted and i tried both restoring and flashing the ROM but all in vain.I am Using the stock recovery as suggested in the forum.
please advise!
cheers!
Click to expand...
Click to collapse
Questions belong in the Q&A Section.
The signature verification failed because SCV7 is based on our ICS leak. Which is TOTALLY different than the OTA update you recieved. There are currently no ROMs available for the firmware you are on.
thordroid said:
Hi,
I recently updated my Atrix 2 to ICS (OTA). however now i am trying to flash supecharged atrix (SCV7) Rom,but it gives me a message saying "Signature verification failed"! what could be the possible reason?am i doing something wrong?
my phone is rooted and i tried both restoring and flashing the ROM but all in vain.I am Using the stock recovery as suggested in the forum.
please advise!
cheers!
Click to expand...
Click to collapse
You should be flashing SCV7 though bootmenu bootstrap. or other cwm based recovery... not stock
farshad525hou said:
You should be flashing SCV7 though bootmenu bootstrap. or other cwm based recovery... not stock
Click to expand...
Click to collapse
Lol farshad, you're so right. I didn't even read that part of his post.
Fall the Moron.... Lol.
Sent from my SAMSUNG-SGH-I727 using xda premium
thordroid said:
Hi,
I recently updated my Atrix 2 to ICS (OTA). however now i am trying to flash supecharged atrix (SCV7) Rom,but it gives me a message saying "Signature verification failed"! what could be the possible reason?am i doing something wrong?
my phone is rooted and i tried both restoring and flashing the ROM but all in vain.I am Using the stock recovery as suggested in the forum.
please advise!
cheers!
Click to expand...
Click to collapse
Possibly that rom is only for the leak ics not for the ota? And you dont use stock recovery you have to use bootmenu or safestrap to install.
willyyumm27 said:
Possibly that rom is only for the leak ics not for the ota? And you dont use stock recovery you have to use bootmenu or safestrap to install.
Click to expand...
Click to collapse
i did try.i guess i softbricked my phone i installed the atrix bootstrap wiped cache,factory reset and tried to flash SCV7.
it said install successful but now when rebooted.i get this AP flashboot screen(boot failure) message.
do i need flash the OTA update via RSD lite? please advice!
thordroid said:
i did try.i guess i softbricked my phone i installed the atrix bootstrap wiped cache,factory reset and tried to flash SCV7.
it said install successful but now when rebooted.i get this AP flashboot screen(boot failure) message.
do i need flash the OTA update via RSD lite? please advice!
Click to expand...
Click to collapse
If you're coming from the official OTA for ICS, and tried to flash SCv7 (which is based on our AT&T leak) you likely have soft bricked your device. You cannot flash an unofficial leak version of a ROM to an official ICS ROM, you should have thought this through a little better. I'm sorry to say, but you're probably S.O.L. (Google that, if needed)...
Apex_Strider said:
If you're coming from the official OTA for ICS, and tried to flash SCv7 (which is based on our AT&T leak) you likely have soft bricked your device. You cannot flash an unofficial leak version of a ROM to an official ICS ROM, you should have thought this through a little better. I'm sorry to say, but you're probably S.O.L. (Google that, if needed)...
Click to expand...
Click to collapse
Its just the system+data naa??..so how come he cant flash it??
Sent from my MB865 using xda app-developers app
is there no way out?
devilhunter47 said:
Its just the system+data naa??..so how come he cant flash it??
Sent from my MB865 using xda app-developers app
Click to expand...
Click to collapse
Oh Cmon! is there really no way out?i just got this phone last month..there must be something i could do!
wouldnt the leak work if i try Fxz ing it through RSD LITE?
can i FXZ this to 2.3.5? would that be of help?
thordroid said:
Oh Cmon! is there really no way out?i just got this phone last month..there must be something i could do!
wouldnt the leak work if i try Fxz ing it through RSD LITE?
Click to expand...
Click to collapse
Dont ever try to fxz from ota ics to gb..you'll hard brick
Sent from my MB865 using xda app-developers app
No you cannot fxz back from the official ota. You're bricked mate, sorry dude, send in for a replacement.
While you're at it read the sticky in the general section about why we all recommend to NOT to OTA to ICS.
There have been many warnings about this for over month.
Best of luck to you.
Sent from my SAMSUNG-SGH-I727 using xda premium
Atrix 2 brick
I've bricked my atrix 2 and reinstalled the original rom with an application from Motorola that let me force the original back on my device. But I did not have ics. So I'll look up the application and the original rom. Later tonight or tomorrow.
You can FXZ from ICS to GB
Fall of Enosis said:
No you cannot fxz back from the official ota. You're bricked mate, sorry dude, send in for a replacement.
While you're at it read the sticky in the general section about why we all recommend to NOT to OTA to ICS.
There have been many warnings about this for over month.
Best of luck to you.
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
Hey wat up?
I wasnt sure if this would work but since my phone was already soft bricked i thought of giving it a shot anyways and tried jimbridgmans utility to get back to GB from ICS..and Guess what?? it worked and My phone is back to Life !!!
Here is the thread :
http://forum.xda-developers.com/showthread.php?t=1805975
I am from INDIA, the script in the thread would flash US ATT version.I am going to FXZ the ASIA Retail version tonight and take it from there.
thanks a bunch for the help guys. Cheers!
thordroid said:
Hey wat up?
I wasnt sure if this would work but since my phone was already soft bricked i thought of giving it a shot anyways and tried jimbridgmans utility to get back to GB from ICS..and Guess what?? it worked and My phone is back to Life !!!
Here is the thread :
http://forum.xda-developers.com/showthread.php?t=1805975
I am from INDIA, the script in the thread would flash US ATT version.I am going to FXZ the ASIA Retail version tonight and take it from there.
thanks a bunch for the help guys. Cheers!
Click to expand...
Click to collapse
no dont cross flash..you'll end up with a hard brick
Fall of Enosis said:
No you cannot fxz back from the official ota. You're bricked mate, sorry dude, send in for a replacement.
While you're at it read the sticky in the general section about why we all recommend to NOT to OTA to ICS.
There have been many warnings about this for over month.
Best of luck to you.
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
Thanks a lot mate!
It is due to recommendation of you guys that I'm still on GB, which is quite snappier than ICS. :good:
I am going to stick with GB too,no more flashing until a stable CM 10 is out
Sent from my MB865 using xda app-developers app
Hello All,
I AM REALLY SORRY IF THIS QUESTION HAS BEEN ASKED MANY A TIMES.
I am from India and running the OTA android 4.0.4 on my Motorola Atrix 2. The version is a headache and spoils the fun of using Atrix 2. I was very much happy with speed that 2.3.6 gave me. But one unlucky day I got the 4.0.4 update and never has it been the same then. I am frustrated to the point of selling off my device.
So i would like to ask anyone who can help me out. Is there anyway I can go to the Stock Motorola Atrix 2 android version 2.3.6 or is there any other 4.0.4 cooked ROM that works better than the OTA 4.0.4? and if there is, can it be installed on my device? I have not yet rooted my device.
P.S. if there is anyway to go back to Stock 2.3.6, nothing could be better than that.
Any help regarding this will be really appreciated.
suket123 said:
Hello All,
I AM REALLY SORRY IF THIS QUESTION HAS BEEN ASKED MANY A TIMES.
I am from India and running the OTA android 4.0.4 on my Motorola Atrix 2. The version is a headache and spoils the fun of using Atrix 2. I was very much happy with speed that 2.3.6 gave me. But one unlucky day I got the 4.0.4 update and never has it been the same then. I am frustrated to the point of selling off my device.
So i would like to ask anyone who can help me out. Is there anyway I can go to the Stock Motorola Atrix 2 android version 2.3.6 or is there any other 4.0.4 cooked ROM that works better than the OTA 4.0.4? and if there is, can it be installed on my device? I have not yet rooted my device.
P.S. if there is anyway to go back to Stock 2.3.6, nothing could be better than that.
Any help regarding this will be really appreciated.
Click to expand...
Click to collapse
Assuming your atrix2 is the Indian version there have been reports of people having fxz back to GB without bricking.but again i don't have the Indian atrix2 (just the at&t version) so i haven't done this personally.
What problems are you having on ICS maybe they can be sorted out by some tweaks/a custom ROM
Sent from my MB865 using xda premium
deveshmanish said:
Assuming your atrix2 is the Indian version there have been reports of people having fxz back to GB without bricking.but again i don't have the Indian atrix2 (just the at&t version) so i haven't done this personally.
What problems are you having on ICS maybe they can be sorted out by some tweaks/a custom ROM
Sent from my MB865 using xda premium
Click to expand...
Click to collapse
The problems I am facing is a lot of lag when flicking through screens, slow downs, non-responsive apps, basically ICS is creating too much stress on the hardware of the phone. I like my phone to run smooth and lag free, so pls suggest me if there are any ROM's that can solve my issues, and if i can upgrade to those ROM's on my OTA ICS 4.0.4... Thanks DeveshMainsh
suket123 said:
The problems I am facing is a lot of lag when flicking through screens, slow downs, non-responsive apps, basically ICS is creating too much stress on the hardware of the phone. I like my phone to run smooth and lag free, so pls suggest me if there are any ROM's that can solve my issues, and if i can upgrade to those ROM's on my OTA ICS 4.0.4... Thanks DeveshMainsh
Click to expand...
Click to collapse
Do a data/ factory reset... ics runs nice and smooth sounds like ur phone needs an old fashioned cleaning out..
Sent from my MB865 using xda app-developers app
I have the same problem with my AT&T Motorola Atrix2. I upgraded it OTA 4 days ago and it is VERY FRUSTRATING!! Its super laggy with lot of lag between flicks, apps open slower and the worst part - once my dialer simply would not place a call on pressing the call button!! What use is a phone that refuses to call??
@Opener did u try factory resetting your phone? Did it help?
@Others, please suggest what I should do. I am a newbie too to android modding so I am not familiar with the currently trending mods/tweaks/cooked roms. Any way to downgrade to 2.3.6? If not, is there any custom firmware that gives better performance?
MenTaLLyMenTaL said:
I have the same problem with my AT&T Motorola Atrix2. I upgraded it OTA 4 days ago and it is VERY FRUSTRATING!! Its super laggy with lot of lag between flicks, apps open slower and the worst part - once my dialer simply would not place a call on pressing the call button!! What use is a phone that refuses to call??
@Opener did u try factory resetting your phone? Did it help?
@Others, please suggest what I should do. I am a newbie too to android modding so I am not familiar with the currently trending mods/tweaks/cooked roms. Any way to downgrade to 2.3.6? If not, is there any custom firmware that gives better performance?
Click to expand...
Click to collapse
First thing to do after update is factory reset..if still your phone is slow apply the awesome v6 supercharger script..my phone is super fast..
Sent from my MB865 using xda app-developers app
There is definitely something wrong with the OTA ICS update. I did many factory resets after the update and performance was unbearable. It seemed to work fine for a little while after the reset, but as soon as I signed into my google account it started giving me fits. I even reset, then created a new google account and it was the same thing. So I reset again and never signed into my account, seemed to work okay for a couple of days, but eventually it was the same performance issues.
I took my phone into the AT&T service center and they knew of the "issue". AT&T ended up replacing the phone under warranty and now I'm back to Gingerbread, kind of wishing I had a stable version of ICS because I really like it.
dmroeder said:
There is definitely something wrong with the OTA ICS update. I did many factory resets after the update and performance was unbearable. It seemed to work fine for a little while after the reset, but as soon as I signed into my google account it started giving me fits. I even reset, then created a new google account and it was the same thing. So I reset again and never signed into my account, seemed to work okay for a couple of days, but eventually it was the same performance issues.
I took my phone into the AT&T service center and they knew of the "issue". AT&T ended up replacing the phone under warranty and now I'm back to Gingerbread, kind of wishing I had a stable version of ICS because I really like it.
Click to expand...
Click to collapse
Could always get on ICS leak #1. If you not satisfied, can always go back to GB. From ICS leak #1 ONLY. Leak #2 and OTA CANNOT get back to GB. You'll only end up with a brick.
Sent from my MB865 using xda premium
A2Trip said:
Could always get on ICS leak #1. If you not satisfied, can always go back to GB. From ICS leak #1 ONLY. Leak #2 and OTA CANNOT get back to GB. You'll only end up with a brick.
Sent from my MB865 using xda premium
Click to expand...
Click to collapse
can we go back to gb via custom roms.. actually i am new to atrix2.. i dont know much about recovery roms and stuffs on atrix 2, as far as i know atrix2 is of little problems and low dev support.. i am on ics ota..
farz2farz said:
can we go back to gb via custom roms.. actually i am new to atrix2.. i dont know much about recovery roms and stuffs on atrix 2, as far as i know atrix2 is of little problems and low dev support.. i am on ics ota..
Click to expand...
Click to collapse
No..a gb rom needs a gb kernel to run which is possible only through fxz..and for the record i was on Searet OTA and successfully fxzd back to Gb 2.3.6 yesterday..am running sonyav4 now
Sent from my MB865 using xda app-developers app
devilhunter47 said:
No..a gb rom needs a gb kernel to run which is possible only through fxz..and for the record i was on Searet OTA and successfully fxzd back to Gb 2.3.6 yesterday..am running sonyav4 now
Sent from my MB865 using xda app-developers app
Click to expand...
Click to collapse
That's awesome news !! So now we have two confirmed cases of successful fxz from OTA 4.0.4 to GB for AsiaRetail version of our phone.
Sent from my MB865 on rooted ICS leak
anikadam said:
That's awesome news !! So now we have two confirmed cases of successful fxz from OTA 4.0.4 to GB for AsiaRetail version of our phone.
Sent from my MB865 on rooted ICS leak
Click to expand...
Click to collapse
Oh and btw i had flashed the china retail ics fxz while i was on searet ics leak and then back to searet 2.3.6 while i tried out miui on my phone..also fxzd directly from china retail ics to searet ics
Sent from my MB865 using xda app-developers app
devilhunter47 said:
Oh and btw i had flashed the china retail ics fxz while i was on searet ics leak and then back to searet 2.3.6 while i tried out miui on my phone..also fxzd directly from china retail ics to searet ics
Sent from my MB865 using xda app-developers app
Click to expand...
Click to collapse
That is some good news, might get the OTA after all
Sent from my MB865 using xda app-developers app
devilhunter47 said:
No..a gb rom needs a gb kernel to run which is possible only through fxz..and for the record i was on Searet OTA and successfully fxzd back to Gb 2.3.6 yesterday..am running sonyav4 now
Sent from my MB865 using xda app-developers app
Click to expand...
Click to collapse
man.. how u do that. As fars i know, everyone ended bricking. i am from india. please help me.
farz2farz said:
man.. how u do that. As fars i know, everyone ended bricking. i am from india. please help me.
Click to expand...
Click to collapse
No big deal..just grab the fxz and flash via rsdlite..that is if your phone isnt at n t
Sent from my MB865 using xda app-developers app
devilhunter47 said:
No..a gb rom needs a gb kernel to run which is possible only through fxz..and for the record i was on Searet OTA and successfully fxzd back to Gb 2.3.6 yesterday..am running sonyav4 now
Sent from my MB865 using xda app-developers app
Click to expand...
Click to collapse
man how u do it. as far as i know every one ended bricking please help me..
---------- Post added at 01:43 PM ---------- Previous post was at 01:36 PM ----------
devilhunter47 said:
No big deal..just grab the fxz and flash via rsdlite..that is if your phone isnt at n t
Sent from my MB865 using xda app-developers app
Click to expand...
Click to collapse
i dont understand. are you from kerala. am also. please help me. my phone is ics ota
farz2farz said:
man how u do it. as far as i know every one ended bricking please help me..
---------- Post added at 01:43 PM ---------- Previous post was at 01:36 PM ----------
i dont understand. are you from kerala. am also. please help me. my phone is ics ota
Click to expand...
Click to collapse
Read the beginner's guide under general section..just drop a pm when you are done..oru malayaliye kandathil santhosham
Sent from my MB865 using xda app-developers app
devilhunter47 said:
No..a gb rom needs a gb kernel to run which is possible only through fxz..and for the record i was on Searet OTA and successfully fxzd back to Gb 2.3.6 yesterday..am running sonyav4 now
Sent from my MB865 using xda app-developers app
Click to expand...
Click to collapse
devilhunter47 said:
Read the beginner's guide under general section..just drop a pm when you are done..oru malayaliye kandathil santhosham
Sent from my MB865 using xda app-developers app
Click to expand...
Click to collapse
wow thats great.. sounds great. I am from thrissur. mm.. i think its better u give me ur phone number. so i can call u and clear my doubts. if you dont mind ( i am stuck on motorola atrix 2. damn i used lot of android phones before including atrix 4g, htc sensation, sgs2, lg 2x etc.. rooting and flashing, never been a problem for me, even installed android on a n9. but this one, a2 is a real pain. haa i,m stucked please help me ]
farz2farz said:
wow thats great.. sounds great. I am from thrissur. mm.. i think its better u give me ur phone number. so i can call u and clear my doubts. if you dont mind ( i am stuck on motorola atrix 2. damn i used lot of android phones before including atrix 4g, htc sensation, sgs2, lg 2x etc.. rooting and flashing, never been a problem for me, even installed android on a n9. but this one, a2 is a real pain. haa i,m stucked please help me ]
Click to expand...
Click to collapse
why no reply pleaaaaase help me.. now i rooted my ics ota installed bootmenu
flashed cm10, now i am on cm10 bootloop, my bootmenu gone, what i do. please help. i installed cm10 to second system. please help.
which version to flash via rsd. some one please reply..
att atrix2 downgrade
deveshmanish said:
Assuming your atrix2 is the Indian version there have been reports of people having fxz back to GB without bricking.but again i don't have the Indian atrix2 (just the at&t version) so i haven't done this personally.
What problems are you having on ICS maybe they can be sorted out by some tweaks/a custom ROM
Sent from my MB865 using xda premium
Click to expand...
Click to collapse
Can you help me pls to downgrade my phone from 4.04 to gb?
My phone is no longer functioning the way it was ever since it was accidentally upgraded to ICS.
It's an AT&T motorola arix2 mb865.
Thanks in advance for your assistance.
Im not sure if this is in the wrong section, but im freaking out. I recently installed ROM Toolbox and changed the font on my phone. It has worked once before, but now when I tried it is stuck in boot. I can enter recovery and fastboot. I looked online and saw that there is a tutorial for flashing back to stock ics. Im scared about doing that as i recently learned that the bootloader is locked. If its not locked, would be this be the correct thing to flash 6.7.2_EDEM-18-SEARET_cfc.xml.z***ip. Here is the sight that has all the stock roms (not letting me post links yet. Any help would be greatly appreciated.
http://forum.xda-developers.com/showthread.php?t=1961310
Firmware Atrix 2 AT&T ICS 4.0.4 by "Firmware Team"
Sent from my MB865 using xda premium
willyyumm27 said:
http://forum.xda-developers.com/showthread.php?t=1961310
Firmware Atrix 2 AT&T ICS 4.0.4 by "Firmware Team"
Sent from my MB865 using xda premium
Click to expand...
Click to collapse
Do I use this file in RSDLite? Sorry for being a noob.
BubbaThing said:
Do I use this file in RSDLite? Sorry for being a noob.
Click to expand...
Click to collapse
Yes you do
Sent from my MB865 using xda premium
willyyumm27 said:
http://forum.xda-developers.com/showthread.php?t=1961310
Firmware Atrix 2 AT&T ICS 4.0.4 by "Firmware Team"
Sent from my MB865 using xda premium
Click to expand...
Click to collapse
Can you somehow post the file because the site is not letting me create an account?
The site keeps saying that it has an active policy against spammers? Can anyone post a file?
BubbaThing said:
The site keeps saying that it has an active policy against spammers? Can anyone post a file?
Click to expand...
Click to collapse
I guess, since your post count is low (< 10). This is the reason you are being prevented from attaching a file.
Just grab your fxz file from here:
http://sbf.droid-developers.org/edison/list.php
That is where all the fxz files are stored and you do not need an id/login to DL them from there. This is the link we always give people.
Just load the fxz file into RSD lite and flash it, and you should be good. Just wait for a while, it can take several min. to flash. Wait until RSD lite says PASS. Your phone will reboot several times while it flashes, that is normal.
jimbridgman said:
Just grab your fxz file from here:
That is where all the fxz files are stored and you do not need an id/login to DL them from there. This is the link we always give people.
Just load the fxz file into RSD lite and flash it, and you should be good. Just wait for a while, it can take several min. to flash. Wait until RSD lite says PASS. Your phone will reboot several times while it flashes, that is normal.
Click to expand...
Click to collapse
Thanks a lot, I flashed and rerooted and now its back to normal. Im not gonna be using rom toolboxever again.
My atrix 2 was 4.0.4 ics and it was only force closing and not responding so i decided to flash the at&t 2.3.5 stock firmware i got a error in rsd 5.6 which said 5/23 and some other things...the phone will not boot into fastboot ap or anything the only sign of life i get is a white led when plugged into the pc but it doesnt show up in rsd!
PLEASE HELP!!!!
lgphoenix10 said:
My atrix 2 was 4.0.4 ics and it was only force closing and not responding so i decided to flash the at&t 2.3.5 stock firmware i got a error in rsd 5.6 which said 5/23 and some other things...the phone will not boot into fastboot ap or anything the only sign of life i get is a white led when plugged into the pc but it doesnt show up in rsd!
PLEASE HELP!!!!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1937112
jimbridgman said:
http://forum.xda-developers.com/showthread.php?t=1937112
Click to expand...
Click to collapse
is there any way to fix this please help reply asap!!!
jimbridgman said:
http://forum.xda-developers.com/showthread.php?t=1937112
Click to expand...
Click to collapse
He lives on..
Good to see you around again, Jim.
Sent from my MB865 using xda app-developers app
alteredlikeness said:
He lives on..
Good to see you around again, Jim.
Sent from my MB865 using xda app-developers app
Click to expand...
Click to collapse
Yep, I am back. Ubuntu is slow for a bit, and the dev phone trade is all worked out now, so... I am back.
I am working on a fresh kexec kernel from scratch, for the a2, based on the moto released code.
lgphoenix10 said:
is there any way to fix this please help reply asap!!!
Click to expand...
Click to collapse
By flashing 2.3.5 firmware on top of 4.0.4, you have most likely hard bricked your device and it will be near impossible to fix. Moto made certain that there is no downgrading..
Sent from my MB865 using xda app-developers app
---------- Post added at 09:28 PM ---------- Previous post was at 09:22 PM ----------
jimbridgman said:
Yep, I am back. Ubuntu is slow for a bit, and the dev phone trade is all worked out now, so... I am back.
I am working on a fresh kexec kernel from scratch, for the a2, based on the moto released code.
Click to expand...
Click to collapse
Great to hear - we could use the help..
So, you pulled it from sourceforge? Is that the kernel source for Asia retail ICS, right?
Sent from my MB865 using xda app-developers app
alteredlikeness said:
Great to hear - we could use the help..
So, you pulled it from sourceforge? Is that the kernel source for Asia retail ICS, right?
Sent from my MB865 using xda app-developers app
Click to expand...
Click to collapse
Yes it is from sourceforge, but there is an mb865 version out there too. The mb version is labeled incorrectly. It is the SEARET mb865 version of the kernel. All that needs to be paid attention to is the WiFi, video, and GPS kernel modules &/ drivers.
Now, it is not ATT based, but that should not be an issue.
You are Super hard bricked
lgphoenix10 said:
My atrix 2 was 4.0.4 ics and it was only force closing and not responding so i decided to flash the at&t 2.3.5 stock firmware i got a error in rsd 5.6 which said 5/23 and some other things...the phone will not boot into fastboot ap or anything the only sign of life i get is a white led when plugged into the pc but it doesnt show up in rsd!
PLEASE HELP!!!!
Click to expand...
Click to collapse
if your mobile is under warranty then go n request for replacement....There is no way to back. AT&T bootloader are locked and never gives the permission for downgrade. You are Super hard bricked.
so theres no way i can fix it ?
amanindia said:
if your mobile is under warranty then go n request for replacement....There is no way to back. AT&T bootloader are locked and never gives the permission for downgrade. You are Super hard bricked.
Click to expand...
Click to collapse
so theres no way i can fix it? nothing i can try? please help!
bought it from a friend unlocked so i cant return it to motorola
Nope, you can use it as a deluxe paper weight.