I had rooted my Skyrocket and went back to stock a couple of days back using this Link
But now i cant perform OTA updates its goes to 25% and fails. I tried searching and came up with nothing that helped. so any help would be appreciated even link to thread if someone knows of any. thanks
Try again
Sent from my SAMSUNG-SGH-I727 using XDA
futureaccount said:
Try again
Sent from my SAMSUNG-SGH-I727 using XDA
Click to expand...
Click to collapse
Done it multiple times. it fails at 25% and when the phone boots up it says the update was interrupted
djteotancolis said:
Done it multiple times. it fails at 25% and when the phone boots up it says the update was interrupted
Click to expand...
Click to collapse
Did you also flash modem back to stock?
ka724ka said:
Did you also flash modem back to stock?
Click to expand...
Click to collapse
No i havnt, i thought odin does that?
let me seach for the stock modem, but will i be able to flash it now since im on stock
djteotancolis said:
No i havnt, i thought odin does that?
let me seach for the stock modem, but will i be able to flash it now since im on stock
Click to expand...
Click to collapse
No, you'll have to Odin cwm again. This is why I tell people to use the sammobile tar
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
xcrazydx said:
No, you'll have to Odin cwm again. This is why I tell people to use the sammobile tar
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
Thank you will get right on it
djteotancolis said:
I had rooted my Skyrocket and went back to stock a couple of days back using this Link
But now i cant perform OTA updates its goes to 25% and fails. I tried searching and came up with nothing that helped. so any help would be appreciated even link to thread if someone knows of any. thanks
Click to expand...
Click to collapse
I had the same problem after reverting to stock. I followed below procedure and am able to upgrade to 2.3.6.
"Use Kies. Open Kies without your phone plugged in. Go to tools, Firmware Upgrade and Initialization, enter your device info (in caps). It will then offer to reload your software. Follow the on screen instructions.
Once you're back on 2.3.5, you can OTA to 2.3.6, if you want."
djteotancolis said:
Thank you will get right on it
Click to expand...
Click to collapse
Let us know how it goes!
Sent from my SAMSUNG-SGH-I727 using XDA Premium App
Related
OK guys since there is a large number of users getting update fever im gonna make this as a means to keep the repeats down hopefully you will all read it and understand.
first off if you are on 2.3.5 you will have an update ota to 2.3.6
if you are on 2.3.6 currently there is no update (i will update the op if this changes)
rules you must be on 2.3.6 stock with stock recovery as well no apps frozen or debloated to get the update (op will change if i am wrong)
on 2.3.6 there is a glitch saying that you have an update available it is wrong you will try it may attempt a dl even but you will not get all the way.
so heres what we need if you take an update and meet all these criteria and it downloads and installs and you see in the about phone section that its 4.0.whatever then you can post i will ask whever takes it gets a stock nand preferably unrooted and rooted this will cut down on the number of posts and help the mods ok thank you for your time
Bump I wont let this get burried
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
as of 2:56 PST
2.3.5 must have the glitch also as that's what i have and I get the same messages. It wont even update to 2.3.6 as I believe AT&T is getting their system ready to put out the 4.0 whatever. Whatever the actual case maybe it can not be to far off now.
I was just tired of the same thread 500 times so I decided to try this
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
pcidiot said:
2.3.5 must have the glitch also as that's what i have and I get the same messages. It wont even update to 2.3.6 as I believe AT&T is getting their system ready to put out the 4.0 whatever. Whatever the actual case maybe it can not be to far off now.
Click to expand...
Click to collapse
If you want 2.3.6 stock download official tar from sammobile
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
another round of leaks, then once all the xda devs fix all the bugs in that leak they should be good to release. ;P. why else would there be so many leaks?
True but I'm on here all the time so I'm tired of the update fever threads
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
I think Sammobile still has 2.3.5 but its nothing to flash it and OTA update to 2.3.6. I did this a few weeks back being bored.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
nrm5110 said:
True but I'm on here all the time so I'm tired of the update fever threads
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
Me too, man
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
nrm5110 said:
If you want 2.3.6 stock download official tar from sammobile
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
Thanks but no thanks, definitely not looking for 2.3.6 well maybe when At&t releases ICS as I know my phone wont upgrade the way it is right now. LOL
Tars and Odin make all issues go bye bye
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
nrm5110 said:
Tars and Odin make all issues go bye bye
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
Can't I just Unroot with superoneclick as that is what I used to get root? Or would I have issues updating afterwords?
pcidiot said:
Can't I just Unroot with superoneclick as that is what I used to get root? Or would I have issues updating afterwords?
Click to expand...
Click to collapse
you'd be better of just flashing a stock tar.
everything needs to be perfectly untouched to update.
OFWGKTADGAF said:
you'd be better of just flashing a stock tar.
everything needs to be perfectly untouched to update.
Click to expand...
Click to collapse
Alright flash stock, then unroot via superoneclick.
pcidiot said:
Alright flash stock, then unroot via superoneclick.
Click to expand...
Click to collapse
Name says it all....but...... if you flash stock you're already not rooted.
pcidiot said:
Alright flash stock, then unroot via superoneclick.
Click to expand...
Click to collapse
No need, stock tar isn't rooted
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
I'm going to flash stock, update to 2.3.6 and stay there for a week.
Anyone placing bets we do get a drop? We can bet in thanks. 10 says no drop.
Uncle Irish said:
Name says it all....but...... if you flash stock you're already not rooted.
Click to expand...
Click to collapse
xcrazydx said:
No need, stock tar isn't rooted
Click to expand...
Click to collapse
Right, sorry for that this should have been a given. Just a little tired, worked midnights and have not slept yet.
Thank goodness it urks me when I see a thread about an update. I predict an official update next week. Around Tues or wed
Chimaira Android 4.0.4 (Beta2)
So yesterday I was running cm9 and I decided to flash a different Rom so I went onto recovery and wipe the phone and then went ahead and flashed
The redemption rom. I went ahead and waited for about 10 minutes to see if it works reboot the samsung logo came on last for like 2 seconds then the screen went blank. So now I into Odin to see if I could flash the Stock image.. when I tried that the first step goes through then I go to the second step and it fails. Here are some pics of my computer and my phone. Please help.
Sent from my ADR6425LVW using xda app-developers app
redownload a new stock image..try that did you unlock your bootloader?
I was rooted and unlocked.
Sent from my ADR6425LVW using xda app-developers app
what stock image were you flashing?
silver04v said:
what stock image were you flashing?
Click to expand...
Click to collapse
i got it from a video from youtube... Where should i get it from?
bakerboy81 said:
i got it from a video from youtube... Where should i get it from?
Click to expand...
Click to collapse
Never ever do that, get your sources from here, you might have repartioned your phone which is not recoverable. http://forum.xda-developers.com/showthread.php?t=1762709 go here and scroll down to return to stock.
L710 is the model number of the Sprint GSIII. Hopefully you can get it back with section 2 of the link posted above.
If that doesn't work use http://forum.xda-developers.com/showthread.php?t=1840030 and it will unbrick your phone.
It looks like your are right ... I wanna thank you for pointing out that I was trying to install the sprint version and not the Verizon version. What relief... Thank you again.
Sent from my ADR6425LVW using xda app-developers app
I wanna thank all those that helped me get my phone back.... Thank you
bakerboy81 said:
I wanna thank all those that helped me get my phone back.... Thank you
Click to expand...
Click to collapse
Glad you got it working again. Just so happened to recognize the L710 model number from modifying the build.prop to get Google Wallet working. Always be sure that anything you flash for the Galaxy SIII is for the Verizon specific I535. They all look the same but can put you up #(*%*'s creek if you're not careful. I'd suggest avoiding anything that's not specifically in the Verizon Galaxy SIII sub-forums.
bakerboy81 said:
I wanna thank all those that helped me get my phone back.... Thank you
Click to expand...
Click to collapse
So guessing your phone is back to fully functional again? Good to hear.
The worst has happened and it's all my fault
Having not used my Galaxy Tab for some weeks (I've been using my SGS III) I updated to the latest Brazillian ICS firmware and for a stupid reason did a factory rest which has resulted in me bricking my Tab.
I am now getting a boot loop on the screen that states it's a Galaxy Tab Plus, I can get into download mode but not recovery.
Having read a number of posts of similar problems, have tried flashing a .pit file and firmware but still no joy. It seems that it may have to be a trip to the Samsung Service Centre. Thankfully in download mode it is still showing a stock firmware with a zero counter.
Would be interested for any experiences on people who have had to return it to a service centre and whether I may get any potential problems as it was bought off ebay around 6 months ago and is the P-6200L model.
Any help is appreciated :good:
I'm not sure about this but u may try to flash cm10.. firstly download pit file and Odin then u flash the pit file.. also download cwm and cm10 then flash cm using cwm.. then wait for the device to reboot.. it works for me.. ^_^
Sent from my GT-P6200 using Tapatalk 2
peterpan01 said:
I'm not sure about this but u may try to flash cm10.. firstly download pit file and Odin then u flash the pit file.. also download cwm and cm10 then flash cm using cwm.. then wait for the device to reboot.. it works for me.. ^_^
Sent from my GT-P6200 using Tapatalk 2
Click to expand...
Click to collapse
Can you point me to these files you have mentioned...
Pit..
CM 10...
Sent from my GT-I9070 using xda app-developers app
please dont do
mazlum78 said:
Can you point me to these files you have mentioned...
Pit..
CM 10...
Sent from my GT-I9070 using xda app-developers app
Click to expand...
Click to collapse
im sorry but please dont do it.. i try to do wipe for the new rom and its happen again and i think you have to wait for samsung developer to fix it.. here is the statement.. http://www.xda-developers.com/android/samsung-diligently-working-towards-hardbrick-fix/
kersey said:
The worst has happened and it's all my fault
Having not used my Galaxy Tab for some weeks (I've been using my SGS III) I updated to the latest Brazillian ICS firmware and for a stupid reason did a factory rest which has resulted in me bricking my Tab.
I am now getting a boot loop on the screen that states it's a Galaxy Tab Plus, I can get into download mode but not recovery.
Having read a number of posts of similar problems, have tried flashing a .pit file and firmware but still no joy. It seems that it may have to be a trip to the Samsung Service Centre. Thankfully in download mode it is still showing a stock firmware with a zero counter.
Would be interested for any experiences on people who have had to return it to a service centre and whether I may get any potential problems as it was bought off ebay around 6 months ago and is the P-6200L model.
Any help is appreciated :good:
Click to expand...
Click to collapse
I had the same thing yesterday.... If I look at the article there is a link there to an article and if you read that I see the advise to flash the original firmware through Odin maybe you can give that a try? I haven't had the change yet... but will try this afternoon... If that doesn't work I will also try aorth's post and if that fails I going back to the service center....
bossie1975 said:
I had the same thing yesterday.... If I look at the article there is a link there to an article and if you read that I see the advise to flash the original firmware through Odin maybe you can give that a try? I haven't had the change yet... but will try this afternoon... If that doesn't work I will also try aorth's post and if that fails I going back to the service center....
Click to expand...
Click to collapse
Have tried flashing a variety of different firmwares for my P6200 even the .pit files but still no luck.
Have spoken to a pleasant customer services gentleman who's arranged for me to return it and have it repaired under warranty.
Must make mental note to self NOT to do a factory reset via the default recovery option ever again
kersey said:
Have tried flashing a variety of different firmwares for my P6200 even the .pit files but still no luck.
Have spoken to a pleasant customer services gentleman who's arranged for me to return it and have it repaired under warranty.
Must make mental note to self NOT to do a factory reset via the default recovery option ever again
Click to expand...
Click to collapse
I tried the ICS from samfirmware through Odin, but no luck... The last option is to try and "downgrade" to Honeycomb (through Odin) if that fails I will go back to service...
*fingers crossed*
aorths post
kersey said:
Have tried flashing a variety of different firmwares for my P6200 even the .pit files but still no luck.
Have spoken to a pleasant customer services gentleman who's arranged for me to return it and have it repaired under warranty.
Must make mental note to self NOT to do a factory reset via the default recovery option ever again
Click to expand...
Click to collapse
i haven't try aorth post yet but if u success with it, please feel free to show it to us.. i have try it but cant use because its say usblib -12 error..
support the xda developer
Click to expand...
Click to collapse
bossie1975 said:
I tried the ICS from samfirmware through Odin, but no luck... The last option is to try and "downgrade" to Honeycomb (through Odin) if that fails I will go back to service...
*fingers crossed*
Click to expand...
Click to collapse
I tried that but sadly no luck with my device
peterpan01 said:
i haven't try aorth post yet but if u success with it, please feel free to show it to us.. i have try it but cant use because its say usblib -12 error..
Click to expand...
Click to collapse
Tried using Heimdall earlier but can't get it to recognise my device, neither will Kies now...back to Samsung is my only chance now!!!
Dude I had the same Problem. Flashed I've again with odyn and wiped everything 4-5times
I've given up... device will be sent back to service desk today for repair. Hopefully under waranty as I didn't root yet nor flashed a custom rom... I did, however, install CWM 6.0.0.8, but I guess that is not an issue (can anybody confirm?)
U need to change to stock recovery, my waranty was void and need to pay $170 due to there change to the new board.
Sent from my GT-P6200 using xda premium
bujai5279 said:
U need to change to stock recovery, my waranty was void and need to pay $170 due to there change to the new board.
Sent from my GT-P6200 using xda premium
Click to expand...
Click to collapse
Great.... Any ideas on how to change back to stock recovery...?
kersey do you try install clockworkmod 6.0.1.0 (aorth's post) by Heimdall 1.3.1 in a linux machine? Maybe the linux find your USB device like an user posted in the same topic...
I do it this in the morning and no have problem. I have a brazilian GT-P6210 with JB now... works fine.
Sent from my Galaxy Nexus using xda premium
Espetakus said:
kersey do you try install clockworkmod 6.0.1.0 (aorth's post) by Heimdall 1.3.1 in a linux machine? Maybe the linux find your USB device like an user posted in the same topic...
I do it this in the morning and no have problem. I have a brazilian GT-P6210 with JB now... works fine.
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
Thanks for the help but sent my device back to Samsung this morning. Very impressed that they sent a pre-paid Special Delivery envelope and bubble wrap to return the device to them. Hope they don't take too long to sort it.
Sent from my GT-I9300 using xda premium
kersey said:
Thanks for the help but sent my device back to Samsung this morning. Very impressed that they sent a pre-paid Special Delivery envelope and bubble wrap to return the device to them. Hope they don't take too long to sort it.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Wow... you had this service here in Brazil? I'm impressed.
Enviado de meu Galaxy Nexus usando o Tapatalk 2
Espetakus said:
Wow... you had this service here in Brazil? I'm impressed.
Enviado de meu Galaxy Nexus usando o Tapatalk 2
Click to expand...
Click to collapse
No mate, am in the UK, which is even more impressive for the quality of service so far...
P6200DXLPB rom
bossie1975 said:
I had the same thing yesterday.... If I look at the article there is a link there to an article and if you read that I see the advise to flash the original firmware through Odin maybe you can give that a try? I haven't had the change yet... but will try this afternoon... If that doesn't work I will also try aorth's post and if that fails I going back to the service center....
Click to expand...
Click to collapse
im already try flashing the new rom P6200DXLPB http://www.sammobile.com/firmware/?page=3&model=GT-P6200&pcode=XME&os=1&type=3#firmware and i wipe the cache.. after that i rebooting and it say cant mount data /data rebooting.. i hope this will help the developer a clue about how to fix it..
I tried using Odin to install a version of 4.1.2 on my s3.. It failed on odin.. I apparently had the wrong file now I cant get into download or recovery mode.. It starts for a second saying loading recovery with the samsung logo then all goes black .. Has some vibrations to it but cant turn in on or connect or even show battery charge on the screen.. Any help to get into any screen would help...
It sounds like a download mode jig should work if you go out and buy one. I'm probably not the 100% best source though.
And that may be a misspell, but there are no 4.1.2 ROMs available to flash in Odin.
Sent from my SCH-I535 using xda app-developers app
andybfmv96 said:
It sounds like a download mode jig should work if you go out and buy one. I'm probably not the 100% best source though.
And that may be a misspell, but there are no 4.1.2 ROMs available to flash in Odin.
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
Yeah I kinda got that now.. no Odin Flash.. I'm a noob.. I've had it rooted for some time and havn't messed with it for a few months.. but wanted 4.1.2 and instead of coming here I went to Youtube and screwed myself.. What it the Download Mode Jig?
Was it a rom from a different phone?
Sent from my SCH-I535 using xda app-developers app
bobAbooE said:
Was it a rom from a different phone?
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
Yeah.. It was for a different model.. It failed numerous times.. Then I was able to get into download mode again then was able to turn off my phone and get into my regular firmware.. Tried to install the AOKP file and reboot into CWM but upon turning off my phone I got stuck in this crap...
You can still ODIN Flash but only stock ROMs. Have you tried to see you can get to download mode?
jmxc23 said:
You can still ODIN Flash but only stock ROMs. Have you tried to see you can get to download mode?
Click to expand...
Click to collapse
Wow.. Amazing I tried about thirty times in the last hour to get back into ODIN.. But unsuccessful..It Finally let me back into Download Mode.. Now before I screw it up anymore.. Please throw me a bone here to get back into my phone.. I probably need to reflash something but not sure what..
WaterSoldier said:
Wow.. Amazing I tried about thirty times in the last hour to get back into ODIN.. But unsuccessful..It Finally let me back into Download Mode.. Now before I screw it up anymore.. Please throw me a bone here to get back into my phone.. I probably need to reflash something but not sure what..
Click to expand...
Click to collapse
http://samsung-updates.com/device/?id=SCH-I535
Here is the stock firmware from Verizon. FYI the international version of the phone has 4.1.2 which is what you have downlaoded. also uninstall and reinstall odin.
jmxc23 said:
http://samsung-updates.com/device/?id=SCH-I535
Here is the stock firmware from Verizon. FYI the international version of the phone has 4.1.2 which is was what you have downlaoded. also uninstall and reinstall odin.
Click to expand...
Click to collapse
Thank you so much..
jmxc23 said:
http://samsung-updates.com/device/?id=SCH-I535
Here is the stock firmware from Verizon. FYI the international version of the phone has 4.1.2 which is was what you have downlaoded. also uninstall and reinstall odin.
Click to expand...
Click to collapse
One last thing.. I know I'm wasting your time but I am very sorry.. But when U say it's an international phone.. Is there still a way to get 4.1.2 on my Verizon S3 being that it's a US phone?? And if so please point me to the right tutorial.. I'll be sure to throw in a few more thanks into your rep.. Thanks..
WaterSoldier said:
One last thing.. I know I'm wasting your time but I am very sorry.. But when U say it's an international phone.. Is there still a way to get 4.1.2 on my Verizon S3 being that it's a US phone?? And if so please point me to the right tutorial.. I'll be sure to throw in a few more thanks into your rep.. Thanks..
Click to expand...
Click to collapse
No you will just have to wait for the OTA which will be a while. Scratch that there a few custom ROMS runing 4.1.2 you will have to check the forums for them.
So, the reason for not needing a jtag was that it failed in odin?
Sent from my SCH-I535 using xda app-developers app
bobAbooE said:
So, the reason for not needing a jtag was that it failed in odin?
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
I would guess it failing is what saved him
Sent from my LG spectrum (that's right) blazing fast on cm10!
kintwofan said:
I would guess it failing is what saved him
Sent from my LG spectrum (that's right) blazing fast on cm10!
Click to expand...
Click to collapse
I really have no Idea why it decided to let me back into download Mode.. But i"m DL the Verizon firmware right now and gonna reinstall.. 4.1.1. Use my Titanium to hopefully bring back what I can.. if not no big deal at least my phone isn't bricked.. I can get back into my phone now but the recovery mode still won't work.. Hopefully it all comes back after the flash..
Buy a powerball ticket man
Sent from my SCH-I535 using xda app-developers app
bobAbooE said:
So, the reason for not needing a jtag was that it failed in odin?
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
As long as he can at least get to download mode his phone can fix it. Odin can also unbrick phones as long as download mode is functioning. Jtag is just unbricking via hardware and it should only be used as a last resort(hard brick). Download jig should only be used if Odin doesn't work. Even samsung has a tutorial on how to unbrick your phone via hardware.
bobAbooE said:
Buy a powerball ticket man
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
I did, I didn't win the 400Million or whatever it was last month.. But no biggie.. I won the lottery today by not bricking my S3
jmxc23 said:
No the reason for not needing a jtag is because he downloaded the wrong ROM for his phone. As long as he can at least get to download mode his phone can be fixed. When your phone is completely shot then use jtag. If that doesn't work then you have to return your phone. Even samsung has a tutorial on how to unbrick your phone via hardware.
Click to expand...
Click to collapse
I think you're confused. Flash an international ROM in recovery and see how that turns out (JTAG). So it would stand to reason had the Odin of an international ROM succeeded you would get same results. So then it failing would seem to be why it's only soft bricked.
Sent from my LG spectrum (that's right) blazing fast on cm10!
kintwofan said:
I think you're confused. Flash an international ROM in recovery and see how that turns out (JTAG). So it would stand to reason had the Odin of an international ROM succeeded you would get same results. So then it failing would seem to be why it's only soft bricked.
Sent from my LG spectrum (that's right) blazing fast on cm10!
Click to expand...
Click to collapse
Please read my edited post the anesthesia hasn't worn off yet.
nice
ok i know there's a lot of threads about this in the q&a but i figured i would just try. i have a s3 and its on the update. when i got the phone it was rooted running alliance rom. i did the update not thinking and it unrooted it. but when i turn on the phone it comes up the samsung screen with a unlocked symbol at the bottom. when i do root checker it says its not rooted. i have tried all the methods. i tried downgrading but when i do that it fails in odin. i have tried saferoot and it fails and says my kernel is patched. I just need to know if there's no hope lol.
pitbullmommy45245 said:
ok i know there's a lot of threads about this in the q&a but i figured i would just try. i have a s3 and its on the update. when i got the phone it was rooted running alliance rom. i did the update not thinking and it unrooted it. but when i turn on the phone it comes up the samsung screen with a unlocked symbol at the bottom. when i do root checker it says its not rooted. i have tried all the methods. i tried downgrading but when i do that it fails in odin. i have tried saferoot and it fails and says my kernel is patched. I just need to know if there's no hope lol.
Click to expand...
Click to collapse
There's no hope for NC1. You have to ODIN back to ML1 and use saferoot.
Sent from the Shark Tank using XDA Premium 4 mobile app
landshark68 said:
There's no hope for NC1. You have to ODIN back to ML1 and use saferoot.
Sent from the Shark Tank using XDA Premium 4 mobile app
Click to expand...
Click to collapse
ya i tried odining back and it fails everytime.
pitbullmommy45245 said:
ya i tried odining back and it fails everytime.
Click to expand...
Click to collapse
Did you get the ml1 from the general section or samsung-updates website?
ThePagel said:
Did you get the ml1 from the general section or samsung-updates website?
Click to expand...
Click to collapse
i got it from the general section.
You could try the one from samsung-updates but I don't think it will wipe internal so that can lead to problems. Did you check the md5? Does odin say what happened?
ThePagel said:
You could try the one from samsung-updates but I don't think it will wipe internal so that can lead to problems. Did you check the md5? Does odin say what happened?
Click to expand...
Click to collapse
i did and it was good and i forget i tried a few weeks ago. i know it just says failed lol. do you have a link to the file for the modem?
pitbullmommy45245 said:
i did and it was good and i forget i tried a few weeks ago. i know it just says failed lol. do you have a link to the file for the modem?
Click to expand...
Click to collapse
I think I saw it on the front page of general or q&a yesterday so its probably still there or on page 2. Couldn't have ran off to far in a day.
ThePagel said:
I think I saw it on the front page of general or q&a yesterday so its probably still there or on page 2. Couldn't have ran off to far in a day.
Click to expand...
Click to collapse
k i found it. i did it and checked the md5 sum and i think it worked. its starting up now....lets give it a min lol.....its on the verizon screen lol.....it vibrated lol.....hmmmm.....lalalalala........waiting waiting waiting
It worked!!! Whoop!!!
I have root and now I'm just waiting on alliance Rom to download and then ill be set
Which room would u reccomend?
Sent from my SCH-I535 using XDA Free mobile app