I restored my phone to gb 2.3.5 ...i tried the whole kdz ..i still have big problem ..the signal is very weak and sometimes no service.
is there any solution or i need to buy another phone .???
my phone was never like that till i updated to su760
I give up "i think the baseband of my phone is dead"
royobanen said:
I restored my phone to gb 2.3.5 ...i tried the whole kdz ..i still have big problem ..the signal is very weak and sometimes no service.
is there any solution or i need to buy another phone .???
my phone was never like that till i updated to su760
I give up "i think the baseband of my phone is dead"
Click to expand...
Click to collapse
try froyo
defcomg said:
try froyo
Click to expand...
Click to collapse
i couldnt restore my phone to froyo kdz
royobanen said:
i couldnt restore my phone to froyo kdz
Click to expand...
Click to collapse
try another froyo i don't see a reason why it would fail
royobanen said:
i couldnt restore my phone to froyo kdz
Click to expand...
Click to collapse
i restored my phone to froyo 2.2.2 still same problem
Related
after trying to upgrade leaked gingerbread from kdz file,
it stuck in some where of upgrading, and says, pull you battery and replace etc. etc..
then I install thiaiz 1.5.2 from zip file
nowwww,
my phone wont open if I didnt conncet the charger,
it also not open when connetcted to computer via usb
so i cant do anything
help please
anyone can help?
There's no gingerbread kdz leaked. What did you try to flash??
The only "official" gb kdz file you can have tried to update to is the v20L leaked version some #@[email protected]$ tried to upload which is for 2x not for 3d. If you tried that then you likely [email protected]#@d your phone. Try an emergency restore through lg update tool...
jimakos29 said:
The only "official" gb kdz file you can have tried to update to is the v20L leaked version some #@[email protected]$ tried to upload which is for 2x not for 3d. If you tried that then you likely [email protected]#@d your phone. Try an emergency restore through lg update tool...
Click to expand...
Click to collapse
you are totaly right man,
especially " some #@[email protected]$ tried " part of your post,
emergency update solve the problem,
thanks for help
nurikarakaya said:
you are totaly right man,
especially " some #@[email protected]$ tried " part of your post,
emergency update solve the problem,
thanks for help
Click to expand...
Click to collapse
Glad I could help there...
Ive really messed my phone up I bricked it when trying to install GB baseband which didnt work then i tried to install a previous back up and now it turns on but I have no IMEI! Is it fixable?
In my signature you have froyo and GB baseband.
Flash correct or use kdz method.
Thanks mate. All sorted now.
You have to reinstall the baseband
discoferret said:
Thanks mate. All sorted now.
Click to expand...
Click to collapse
The final method you used, I used KDZ and I have not worked
jmagj79 said:
The final method you used, I used KDZ and I have not worked
Click to expand...
Click to collapse
I used the KDZ method.
discoferret said:
I used the KDZ method.
Click to expand...
Click to collapse
Rom that you installed, I have installed V10d, I get imei at first, but when I connect the mobile phone will imei and out unknown
I tried to root my phone (tmobile g2x) to Eaglesblood ICS rom...the rooting went well but couple of functions didnt work after the root (like home button and no Google play/android market, call didnt work either).
So i decided to go back to my original Stock room 2.3.3 gingerbread..since i forgot to back up...i download the stock rom from Modaco. Then I installed gingerbread 2.3.3.
Now everything works well BUT whenever I try to call...I hear this loud irritating static sound and I dont hear anything else....Please can anyone help me out...this is frustrating!
what baseband are you on?
what modaco rom cause he usually builds for Euro phones (p990)
Baseband is M6600a-scautnz-2.0.9720t 1 [mar 11 2012 10:00:00] mp:trulge_08.09.02r_mdm
rushin25 said:
Baseband is M6600a-scautnz-2.0.9720t 1 [mar 11 2012 10:00:00] mp:trulge_08.09.02r_mdm
Click to expand...
Click to collapse
You have to rvert back to the old baseband. There arent any roms that i know of that are built on the new basebands
Actually I just talked to a Customer service guy at Tmobile...He asked me to turn off my phone and remove the battery. Then he said he is gonna refresh my network connection.
Turned my phone back on and IT WORKED!! Thank god...
But thank you guys for your effort and concern....appreciate it!!
rushin25 said:
Actually I just talked to a Customer service guy at Tmobile...He asked me to turn off my phone and remove the battery. Then he said he is gonna refresh my network connection.
Turned my phone back on and IT WORKED!! Thank god...
But thank you guys for your effort and concern....appreciate it!!
Click to expand...
Click to collapse
wow thats really weird. because i know for a fact you have to use the baseband that the rom was built with. but glad you got it fixed
I guess you are right....the problem started again....But i swear it was wroking before
How do i go back to original baseband?
rushin25 said:
I guess you are right....the problem started again....But i swear it was wroking before
How do i go back to original baseband?
Click to expand...
Click to collapse
I think this thread should be of help. (Use at your own risk!)
http://forum.xda-developers.com/showthread.php?t=1606945
You'll want to flash V21E_00.kdz to your phone. This is the old 2.3.3 gingerbread with the July 15 2011 baseband. Thanks to overground for this!
For some reason the KDZ program crashes after i click "upgrade start". Does it work only on windows XP? because i m using windows 7
BTW, my brother has the exact tmobile g2x, if I backup his phone and use that backup to restore my phone, will that upgrade my baseband and everything?
#iforgottobackupmyphone
rushin25 said:
For some reason the KDZ program crashes after i click "upgrade start". Does it work only on windows XP? because i m using windows 7
BTW, my brother has the exact tmobile g2x, if I backup his phone and use that backup to restore my phone, will that upgrade my baseband and everything?
#iforgottobackupmyphone
Click to expand...
Click to collapse
If you nandroid your brother's phone and restore to your phone you will not get his baseband. The thread does say that Windows XP is necessary, perhaps Windows XP Mode in Windows 7 would work but I've never done any of this so I can make no guarantees.
This thread http://forum.xda-developers.com/showthread.php?t=1610597 has a procedure with which a few people running Windows 7 x64 have had success. Read this post http://forum.xda-developers.com/showpost.php?p=25118883&postcount=4 and you might be successful. Like I said, I've never done this. I'm just giving the information. I can make no guarantees.
Hi, I'm new to this so pls bear me... I'm currently running Gb V20C and wanted to flash Jellybam 4.2.1. I know that after flashing it, I need to flash the baseband back to V20C in order for it to use 3G. So how do I do it exactly?
_LGFlashTool _+ lg drivers
http://forum.xda-developers.com/showthread.php?t=1244490
http://forum.xda-developers.com/showthread.php?t=1958484
hope it help you
Thanks
3Dpixel said:
_LGFlashTool _+ lg drivers
http://forum.xda-developers.com/showthread.php?t=1244490
http://forum.xda-developers.com/showthread.php?t=1958484
hope it help you
Click to expand...
Click to collapse
Thanks for the reply, but I have the tools and drivers already... So to flash the baseband, I just put the .dll and .fls files only right?
yes it will faid but its oke
good lluck:]
Thanks
3Dpixel said:
yes it will faid but its oke
good lluck:]
Click to expand...
Click to collapse
Thanks bro!
I really need that modified usb cable to flash baseband? I want to change the baseband because sometimes my phone is unresponsive all i got is black screen and i think is because of the baseband.Or is not?
khrisstyan said:
I really need that modified usb cable to flash baseband? I want to change the baseband because sometimes my phone is unresponsive all i got is black screen and i think is because of the baseband.Or is not?
Click to expand...
Click to collapse
To flash baseband you need the .fls file only.
No modified cable needed. also, LG Flashtool will show "FAIL"after about 89 seconds. this is normal. Just disconnect then and reboot!
all the best.
schubeir
khrisstyan said:
I really need that modified usb cable to flash baseband? I want to change the baseband because sometimes my phone is unresponsive all i got is black screen and i think is because of the baseband.Or is not?
Click to expand...
Click to collapse
to use flash tool u neednt midified cable, only change usb port to 41
Sent from my LG-P920 using xda app-developers app
When i'm tring to install LGUnitedMobileDriver_S497MA20_WHQL_ML_Ver_1.0.exe i get the error from the attached pic..
khrisstyan said:
When i'm tring to install LGUnitedMobileDriver_S497MA20_WHQL_ML_Ver_1.0.exe i get the error from the attached pic..
Click to expand...
Click to collapse
are u using windows 8?
Sent from my LG-P920 using xda app-developers app
yes, but I ignored the message because at the end said that installed successfully.but now I reached at the step when i have to disconnect the phone and connect it again after 5 seconds but when im connecting it again I get unrecognized device message.I unplugged the phone, removed the battery, put it back and plugged it again and gets recognized but the flash tool after 7 sec give me the error that fls file path incorrect..something like that
update: i think the problem was v21f.fls file because i flashed v.18 and now the phone can't find any network...
Is this normal?
Flashed v20b still no service, tried to flash v21e..can not flash it ..help?
Update...lost my imei..
someone can please help me?I read the forums but i'm verry confused, ai flashed v18 20a 21d and others but i can not make the phone part work, v21e and v21f I could not install them.I have a stock rooted gingerbread
khrisstyan said:
someone can please help me?I read the forums but i'm verry confused, ai flashed v18 20a 21d and others but i can not make the phone part work, v21e and v21f I could not install them.I have a stock rooted gingerbread
Click to expand...
Click to collapse
Hi,
PLease try this.
http://forum.xda-developers.com/showthread.php?t=1942836
I have myself been saved many times by this link.
schubeir
Guys i am trying to flash V18a baseband only and it gives me the Invalid AP path on LG flash tool, CM10 cyanogenMod. with smart flash it work but still don't get no signal. any idea how to get the signal?
My question may sound foolish but here it is.
I have Galaxy R with me on stock 2.3.4. Never rooted or installed any sort of ROMs.
If I carry this phone to Singapore and try to update OTA, will I be able to update to ICS as I see ICS Stock ROM for Singapore already released.
saroj405 said:
My question may sound foolish but here it is.
I have Galaxy R with me on stock 2.3.4. Never rooted or installed any sort of ROMs.
If I carry this phone to Singapore and try to update OTA, will I be able to update to ICS as I see ICS Stock ROM for Singapore already released.
Click to expand...
Click to collapse
If update is released in your area/country then only you will get OTA update or else you will not get it....
where are you from i mean which country..
mj.vikram said:
If update is released in your area/country then only you will get OTA update or else you will not get it....
where are you from i mean which country..
Click to expand...
Click to collapse
I am from India. I may go to Singapore next month. Here in india OTA won't show any new update as it has never gone past 2.3.4
But in Singapore, I think the update for ICS has been released. So I had a doubt if I go there, and just search for update OTA, will I be able to see ICS and be able to update to ICS??
saroj405 said:
I am from India. I may go to Singapore next month. Here in india OTA won't show any new update as it has never gone past 2.3.4
But in Singapore, I think the update for ICS has been released. So I had a doubt if I go there, and just search for update OTA, will I be able to see ICS and be able to update to ICS??
Click to expand...
Click to collapse
Buddy India we also we got ICS just connect your phone to PC and update it using Samsung Kies S/W and in INDIA Galaxy R released with 2.3.5 not 2.3.4..... No OTA Differs from area to area its depends on Phone CSC so you will not get OTA if you go to Singapore ....
mj.vikram said:
Buddy India we also we got ICS just connect your phone to PC and update it using Samsung Kies S/W and in INDIA Galaxy R released with 2.3.5 not 2.3.4..... No OTA Differs from area to area its depends on Phone CSC so you will not get OTA if you go to Singapore ....
Click to expand...
Click to collapse
Are you sure that we get ICS in India when we connect to a PC using kies???
saroj405 said:
Are you sure that we get ICS in India when we connect to a PC using kies???
Click to expand...
Click to collapse
yes just check it with kies ....
Also, our phone does not get updates with respect to our geographical location.. If you purchased your phone in India, you will have an indian rom by default and kies will search for an update to that rom.. So even if you take your phone to hong Kong or Taiwan it will not update if ics for India is not available...
Since ics is out for india, you can go ahead and update with kies as suggested by mj.vikram buddy
From my CM10.1 powered galaxy R
If we update through Kies, will my phone be affected by the eMMC brick bug? will my phone get bricked by chance? is there any safe way to do it?
pankajramnani said:
If we update through Kies, will my phone be affected by the eMMC brick bug? will my phone get bricked by chance? is there any safe way to do it?
Click to expand...
Click to collapse
buddy, just dont unpluged the phone when It will be updating. Also, eMMC bug is there in ICS. so after that just install CWM & then install Ardatdat's kernel V4 or higher. it is safe.
pankajramnani said:
If we update through Kies, will my phone be affected by the eMMC brick bug? will my phone get bricked by chance? is there any safe way to do it?
Click to expand...
Click to collapse
yes off course eMMC Brick bug will be there but it will not effect you until unless you wipe anything from CWM, if you are not using CWM then it will be safe or else you flash Ardatdat's kernel if you are using CWM.....
mj.vikram said:
yes off course eMMC Brick bug will be there but it will not effect you until unless you wipe anything from CWM, if you are not using CWM then it will be safe or else you flash Ardatdat's kernel if you are using CWM.....
Click to expand...
Click to collapse
I've never rooted my phone. So, if I want to just update it through Kies, and then wipe data and factory reset my phone, will it do any harm to it? (considering that there is no CWM & ardatdat kernel is installed). Please tell me the steps to install the kernel as well..
Sorry for bugging you!
pankajramnani said:
I've never rooted my phone. So, if I want to just update it through Kies, and then wipe data and factory reset my phone, will it do any harm to it? (considering that there is no CWM & ardatdat kernel is installed). Please tell me the steps to install the kernel as well..
Sorry for bugging you!
Click to expand...
Click to collapse
if you never rooted your mobile and don't want to use CWM forget all the things and just use Kies and update it ICS.....
mj.vikram said:
if you never rooted your mobile and don't want to use CWM forget all the things and just use Kies and update it ICS.....
Click to expand...
Click to collapse
Thanks a ton!
You are saying that the brick bug won't affect me at all if I am not using CWM, right?
pankajramnani said:
Thanks a ton!
You are saying that the brick bug won't affect me at all if I am not using CWM, right?
Click to expand...
Click to collapse
Yep you are correct....
Brick bug won't affect you, but don't do a factory reset! It's like wiping without a secure kernel.
New firmware found.
Firstly I was shocked to see this new firmware on kies. All these days I was checking on Kies(Mac version) and didn't find any update.
(I am on GB 2.3.5. Never did any customizations on my phone, no rooting, no infected ROM. Nothing. It is as same as it was when I took it)
Now, I find this firmware update on KIES (Windows version) and wanna know if I can go ahead and update this firmware?? Is there any side effect of doing this?
Some one says you cannot factory reset after this firmware. Someone says, nothing would happen.
I am confused. Please help.
P.S: I am newbie and have no clue about CWM or eMMC brick or kernal
saroj405 said:
Firstly I was shocked to see this new firmware on kies. All these days I was checking on Kies(Mac version) and didn't find any update.
(I am on GB 2.3.5. Never did any customizations on my phone, no rooting, no infected ROM. Nothing. It is as same as it was when I took it)
Now, I find this firmware update on KIES (Windows version) and wanna know if I can go ahead and update this firmware?? Is there any side effect of doing this?
Some one says you cannot factory reset after this firmware. Someone says, nothing would happen.
I am confused. Please help.
P.S: I am newbie and have no clue about CWM or eMMC brick or kernal
Click to expand...
Click to collapse
buddy: just take backup of your contacts & msgs. If it could (it won't but for safety side), then please go ahead. update it. Coz CWM format may harm due to eMMC bug.
kataria.vikesh said:
buddy: just take backup of your contacts & msgs. If it could (it won't but for safety side), then please go ahead. update it. Coz CWM format may harm due to eMMC bug.
Click to expand...
Click to collapse
I dunno about CWM and i don't have it on my phone. can you please explain about this and how it would harm due to eMMC bug.
( I ran eMMC brick bug check application on my phone. It is a sane device. )
saroj405 said:
I dunno about CWM and i don't have it on my phone. can you please explain about this and how it would harm due to eMMC bug.
( I ran eMMC brick bug check application on my phone. It is a sane device. )
Click to expand...
Click to collapse
Simply update it & do not think much about these things and for safe side do not wipe data.....
mj.vikram said:
Simply update it & do not think much about these things and for safe side do not wipe data.....
Click to expand...
Click to collapse
Error says you require more than 3000MB space.