Hey there, my brother recently inheritted someones old Rogers Galaxy S2 LTE. My brother is using MTS which uses the same bands/freqs (same towers in fact) as Rogers and was wanting to use this phone instead of his crappy Nokia.
He threw his SIM card in and got the screen asking for the network unlock key. He went to cellunlocker.net and purchased the unlock key and unlocked the phone.
However with his SIM card in he still doesnt appear to pick up any signal at all. I have an android (GNex) on the same network (MTS) and have never had an issue.
Do I have to flash a non-rogers ROM to get it working? I saw the SKY ICS one and was thinking I might flash that one to try it out. Unfortunately I wont have access to the phone until tomorrow
EDIT: I should have mentioned that his phone is completely stock right now. I have read about "Locked" radios and am wondering if that isnt the cause of our issues. I have heard from other I727 owners who were able to get their phones on MTS
Hey everyone, I am a Galaxy Nexus user but my brother got an old Roger's S2 LTE that he wants to put on a non-Rogers network (same one I am on with my GNex). However we are having a weird issue where if we insert the original (deactivated) SIM that came with the phone it detects it. But if we put in either mine or his own it just always says "No SIM Card". I even have a pay as you go AT&T SIM that wont work in it either. So far I have flashed CyanogenMod and tried the UCLF6 radio as well as the Rogers ICS Radio UXLF3 from this thread http://forum.xda-developers.com/showthread.php?t=1754473
I should note that when my brother originally inserted his SIM he got the unlock screen and paid to unlock it through cellunlocker.net and it was recognizing his SIM at that point. Since then however we have had no luck. He even replaced the SIM card board with a new one.
Any ideas? I am leaning towards hardware issue but its odd that it still reads the original inserted SIM
did you try to go back to stock firmware and see what happened
Yep. I'm pretty sure its hardware. I got it to read again but still no signal. I have it reading my AT&T card now but again still no signal.
In fact even without a SIM card in if I search for Network Operators nothing comes up. If I do the same on my GNex I get a listing so its looking like this phone is no good
EDIT: Just realized who responded. Your threads were VERY helpful for me! Thanks so much... I'm still not convinced the phone is toast... I have a friend with a GNex on Rogers (I'm on MTS) so I will see if I can borrow his SIM and see what happens
WoodroweBones said:
Yep. I'm pretty sure its hardware. I got it to read again but still no signal. I have it reading my AT&T card now but again still no signal.
In fact even without a SIM card in if I search for Network Operators nothing comes up. If I do the same on my GNex I get a listing so its looking like this phone is no good
EDIT: Just realized who responded. Your threads were VERY helpful for me! Thanks so much... I'm still not convinced the phone is toast... I have a friend with a GNex on Rogers (I'm on MTS) so I will see if I can borrow his SIM and see what happens
Click to expand...
Click to collapse
agree, not the phone, the only way to make sure of anything is to restore to stock and do all the testing from that point on
edit: dah, its the radio, what freq is the new sim card on that wont work, is it the same as T-Mobile
edit: maybe not radio, think its like rogers, could be network settings
Actually both MTS and Rogers use the same towers so the phone should be set properly.
I've got it reading my MTS SIM now but cant pick up any networks. Its set to LTE/HSPA/GSM (Auto) and MTS is HSPA.
Is there anything that could be done to the IMEI of the phone to sort of "blacklist" it from working on any network?
Here is where I have tested from so far:
Stock before I did anything to the phone (Stock rogers GB)
CM9 Nightly
Stock Rogers ICS
SkyICS
I have also tried both the lastest AT&T Radio as well as the latest Rogers Radio. With my GNex both myself and my friend on Rogers use the same Radio (UGLC1).
At this point it seems either the radios arent working at all or the phone is blocked somehow
EDIT: Info on the MTS network... Found on the FAQ on their site:
Any unlocked devices (i.e. devices that are not tied to a specific carrier) will work with MTS SIM cards (on the MTS 4G network). However, carriers such as Rogers, Bell and Telus lock their devices to work with only their SIM cards and these devices will not work with a MTS SIM card. Similarly, MTS intends to lock our devices to our SIM cards. Therefore, our devices will not be usable on another carrier's network.
Please note that any unlocked device must support 4G North American Frequencies (850Mhz), older GSM devices will not function on our new 4G network. You can find out if your device is 4G compliant by reviewing the phone's settings.
Click to expand...
Click to collapse
Also this link: http://www.howardforums.com/showthread.php/1711666-MTS-4G-frequency
UGLC1 never seen that radio for the skyrocket
edit: oh, for the gnex
did you try the *#2263# menu
Yes when I try that menu (*#2263#) it doesnt do anything. I can do *#*#4636#*#* when on CM9 and it works but on stock and SkyICS it just FCs when I select "Phone Information"...
I am going back to Rogers Stock ICS right now. Gotta head off to my engagement party but will likely be back at it tomorrow
shouldn't forceclose, redl and try reflashing x2 the rogers radio, wipe/format x3 in cwm b4 going back to stock ics
Will do first thing tomorrow (or tonight if I'm still in any shape to do so )
If anyone reading this thread has a stock Rogers phone can you turn it off, take out your SIM and then boot it up without a SIM in it and then do a Network Search and see if anything comes up? On my GNex I get networks but on the S2 LTE I dont. In fact I have never seen any signal from any network on this phone yet with an MTS, AT&T and an old Rogers SIM
EDIT: Actually you will probably have to be on CM9. With stock you cant get to the Network Operator section without a SIM card inserted but in CM9 you can
vincom said:
shouldn't forceclose, redl and try reflashing x2 the rogers radio, wipe/format x3 in cwm b4 going back to stock ics
Click to expand...
Click to collapse
Ok I had enough time to do as you suggested above. Wiped like crazy then went back to stock using the ODIN method and the firmware from sammobile.
Actually I figured it out... it only FCs when I have the AT&T SIM card in and I think thats because AT&T is RAT Locked? If I have no SIM in I can get to all the menus.
k, try to set the freq(play around with it) in that menu w/out sim, then shutdown and install sim b4 restarting, left haptic to click "end" is saving
Got home and went right to work. Almost positive the problem is the radio not working now. I managed to get both SIMs reading without issue but neither will get signal of any sort (even straight after stock reflash). Gonna call it for now until I get a hold of my buddys Rogers SIM.
Thanks so much for all the help, I really appreciate it!
Hey everyone I've run into a problem and have not clue how to fix it. I had purchased a Rogers s3 and unlocked it with an unlock code and currently use it on the Bell network. I had my phone rooted so when the service provider was rolling out the jelly bean updates I missed mine. So I flashed the new OS onto the phone myself (the one from Bell) and it seems I no longer get LTE speeds. I was wondering if anyone else has gotten these problems with the new OS. Also should I be installing Rogers updates or Bell updates? It's the same model.
Lastly a buddy recommended juice defender to help with the battery life. When I use it at times when I unlock my phone to use it I don't get any reception whatsoever or the data doesn't turn back on. I need to reboot time get service and data back.
I recently got an HD2. According to the seller it is unlocked, but With my AT&T SIM card in it, it won't connect to the network. Originally it had WM6.5 but I have also tried it with ICS and GingerBread and it does the same thing. The closest I have gotten is a message that says "Registering on AT&T..." then after that it says it failed. Help? I know 3G wont work, right now I'm just trying to get phone and SMS working.
If anyone has some input it would be really appreciated. :good:
Please help
Hi! We purchased a sealed (unlocked, we think) Galaxy S7 (G930A) online, and are using it in Canada with the Bell Mobility network (using a Bell SIM card). The connection works, but, we noticed two things:
1) The signal sometimes cuts out, as it drops off the network, and we need to power off and power on the device, and
2) The current version of Android software is 6.0, and when we try to do the Software Update, it says there are no updates available.
I have heard that because we are not connected to the AT&T network here in Toronto, it won't send the OTA update. Does anyone know a way around this? I am not against using Odin software and trying to manually install the new software, but, that would be our least preferred option.
I have tried purchasing an AT&T prepaid sim card (did not load any value on it), and it still says no update available. We jhave tried using the Smart Switch software, but it says no updates available.
If anyone else has gone through this situation before, we would love to hear your story. Any help on how to get the software update would be very much appreciated.
Thank you.