Database Info

I believe I bricked my phone.. NEED HELP !

So i guess I felt out of date and wanted to root my phone and use that cm10 rom or whatever everyone else is and i messed it up real bad. I keep getting this msg "this build is for development purposes only do not distribute outside of htc.." on the loading screen. At this point i just want to restore it back to normal , idc if i lose data , i just want my phone to WORK! I've flashed a clean recovery.img but whenever i try to access recovery , it brings me back to that screen with the red words. In addition , my phone is rogers so i can't even find a correct RUU to install. Does anyone have any suggestions as to how I can get my phone to work again ? Any help is greatly welcomed !
P.S Wow i think it got worse , now it doesnt even loop again , it goes start into that menu bootloader, reboot , power down.. Omg i spent 5 hours looking into this. I NEED HELP!

Lasts3cond said:
So i guess I felt out of date and wanted to root my phone and use that cm10 rom or whatever everyone else is and i messed it up real bad. I keep getting this msg "this build is for development purposes only do not distribute outside of htc.." on the loading screen. At this point i just want to restore it back to normal , idc if i lose data , i just want my phone to WORK! I've flashed a clean recovery.img but whenever i try to access recovery , it brings me back to that screen with the red words. In addition , my phone is rogers so i can't even find a correct RUU to install. Does anyone have any suggestions as to how I can get my phone to work again ? Any help is greatly welcomed !
P.S Wow i think it got worse , now it doesnt even loop again , it goes start into that menu bootloader, reboot , power down.. Omg i spent 5 hours looking into this. I NEED HELP!
Click to expand...
Click to collapse
..... It says that on every One X, it's HTC telling whoever turns the phone on that you used HTCDev.com
Make Sure you have TWRP (recovery) flashed/installed ... then in the bootloader go into recovery and flash cm10 ... and since you probably have the newer hboot 1.14 that means that you HAVE to flash the kernel (boot.img) via fastboot
Which is simple,
flash cm10
then reboot into the bootloader > fastboot
extract the boot.img from the cm10.zip
and fastboot flash boot boot.img
then your done reboot and enjoy.... (anything else read threw the forum, all your answers have been asked by somebody else already)

On rogers he won't have the 1.14 hboot, which means all he has to do is install the rom.
Try flashing the recovery again (TWRP ONLY!)
And then reinstall CM10

Tachi91 said:
..... It says that on every One X, it's HTC telling whoever turns the phone on that you used HTCDev.com
Make Sure you have TWRP (recovery) flashed/installed ... then in the bootloader go into recovery and flash cm10 ... and since you probably have the newer hboot 1.14 that means that you HAVE to flash the kernel (boot.img) via fastboot
Which is simple,
flash cm10
then reboot into the bootloader > fastboot
extract the boot.img from the cm10.zip
and fastboot flash boot boot.img
then your done reboot and enjoy.... (anything else read threw the forum, all your answers have been asked by somebody else already)
Click to expand...
Click to collapse
Can you post download to to what you're refering to ? I want to delete all my old files and redownload it all, starting fresh.
ugh crap im so lost , i don't get what to install like .. i flash CWM and it doesnt work and all that omg . Can we skype or somethng so we can do this step by step ? :$

Lasts3cond said:
i flash CWM and it doesnt work and all that omg
Click to expand...
Click to collapse
That might be your problem. CWM isn't supported for this phone and has been known to corrupt data.
Links for all the files you need are in a sticky in the Development forum. Here's the link for TWRP:
http://forum.xda-developers.com/showthread.php?t=1677447
Once you've got that, you can wipe your phone inside TWRP (don't do it in bootloader--you'll have to reformat your sd card), and reflash CM10.

That link requires me to use that GOO manager? Confused lol i have TWRP on my computer but not sure the steps to use it ..

Lasts3cond said:
That link requires me to use that GOO manager? Confused lol i have TWRP on my computer but not sure the steps to use it ..
Click to expand...
Click to collapse
You can't use Goomanager if the phone doesn't boot. You need to push it over to your phone using adb, then you can flash it from recovery.

redpoint73 said:
You can't use Goomanager if the phone doesn't boot. You need to push it over to your phone using adb, then you can flash it from recovery.
Click to expand...
Click to collapse
Lol yeah i understand that and adb? I can't even past the screen where it shows fastboot , factory rest , shut down .. etc

Lasts3cond said:
Lol yeah i understand that and adb? I can't even past the screen where it shows fastboot , factory rest , shut down .. etc
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1754018

iElvis said:
http://forum.xda-developers.com/showthread.php?t=1754018
Click to expand...
Click to collapse
Beat me to it.
Read up, get adb working. Then you can install TWRP using adb.

So first i need to get adb working , then install TWRP to wipe my phone? To access that i flash TWRP and go into recovery right ?
EDIT: So .. i've downloaded that adb , and i got a bunch of files.. what do i do with this? I put them into my fastboot folder in my C drive.. Also i need to unlock my phone to do this right ? Cause i accidently relocked it .
EDIT: OKAY i rooted my phone , and got into TWRP , tried a factory rest under the wipe menu. http://i48.tinypic.com/13yklep.jpg It says fails.. what do i do ?

Go to mount usb storage (not sure which screen its on) while it's plugged into your computer
If windows says the card is corrupted, format it fat32, then copy over a rom onto your sd card

area51avenger said:
Go to mount usb storage (not sure which screen its on) while it's plugged into your computer
If windows says the card is corrupted, format it fat32, then copy over a rom onto your sd card
Click to expand...
Click to collapse
Okay got into mount http://i47.tinypic.com/2cq085x.jpg then a screen pops up , is this the one? http://i45.tinypic.com/m7ur08.jpg
EDIT: Okay so i need to copy a rom onto my phone via usb. Do i copy over the boot.img,system and NETA-INF from cm10 ?
So i put the cm10 zip onto my sdcard (my phone) and i got this when i want to install .. should i proceed? http://i45.tinypic.com/28uts7n.jpg

WAIT NOOOOO
That is an international rom
Get CM10 from THIS FORUM ONLY
http://forum.xda-developers.com/showthread.php?t=1790032

area51avenger said:
WAIT NOOOOO
That is an international rom
Get CM10 from THIS FORUM ONLY
http://forum.xda-developers.com/showthread.php?t=1790032
Click to expand...
Click to collapse
LOL okay ! But on that thread isnt that cm10 for AT&T HTC XL? :S I have a Htc one x rogers .

Lasts3cond said:
LOL okay ! But on that thread isnt that cm10 for AT&T HTC XL? :S I have a Htc one x rogers .
Click to expand...
Click to collapse
The Rogers HTC One X IS a HTC One XL. Rogers just branded it. The OneX has the Tegra 3 Quad Core Processor, the One XL has the S4 Dual Core Processor. Your phone is the same as the ATT Version. Trust me

Okay got the evita one but it still says same msg , should i proceed? :S

lasts3cond said:
okay got the evita one but it still says same msg , should i proceed? :s
Click to expand...
Click to collapse
omfg it works ty so much!

No problem. Just be glad you didn't flash an international Rom. They can render your device completely unusable. Remember only flash things from this forum and enjoy
Sent from my HTC One XL using xda app-developers app

area51avenger said:
No problem. Just be glad you didn't flash an international Rom.
Click to expand...
Click to collapse
After all that, lol. At least he had the sense to stop and ask.

Need Help:can't flash any recovery,RUU doesn't restore my soft,One S- no OS

Hi, everything messed up from using the stupid TWRP 2.6.0.0 .... I was going to flash a custom rom , but it didn't let me, so I did a little research that I need 2.3.3.0 in order to instal any custom rom.So I tried to switch to 2.3.3.0 but it didn't let me... after that I tried to push stock recovery and now i'm stuck at the white HTC Entering Recovery ( pink letters) screen, ( The recovery just doesn't load) ... I just want to finish with this , and go back to my stock htc rom with not roots or anything.. im tired of this seriously.....
When I try to run RUU I get stuck at the Black HTC Letters screen , the the setup stops and says that it will try to repair my phone, sadly with no result every time.. I think that I don't have any OS on my phone right now, because when RUU starts it shows :
Change image version from : ( blank space)
To: ..... bla bla bla , ( the version of the ruu) ...
I have no problems with entering fastboot and unlocking/relocking my Hboot.
Any help about restoringmy phone will be appreciated . Thanks , I'm online all the time so if I get any responses I'll answer quick.
P.S. I can't mount my usb storage from anywhere, and it doesn't show up on my PC when i connect the usb

looperman said:
Hi, everything messed up from using the stupid TWRP 2.6.0.0 .... I was going to flash a custom rom , but it didn........................
P.S. I can't mount my usb storage from anywhere, and it doesn't show up on my PC when i connect the usb
Click to expand...
Click to collapse
Don't lose hope, don't panic.
Tell me which RUU did you use?
Also, what is your CID?
How did you flash your recovery ?
Sent from my HTC One S using Tapatalk 4 Beta

khan.orak said:
Don't lose hope, don't panic.
Tell me which RUU did you use?
Also, what is your CID?
How did you flash your recovery ?
Sent from my HTC One S using Tapatalk 4 Beta
Click to expand...
Click to collapse
well I think that it doesn't really matter which RUU I "used" because it doesn't even get me in the process of installing...
still , tried these two:
RUU_VILLEC2_U_ICS_40_S_HTC_Europe_2.15.401.100_Radio_16.21.20.02U_16.09.20.11_M2_release_286571_signed
RUU_Ville_U_ICS_40_S_HTC_Europe_2.21.401.10_Radio_1.06s.50.02.27_2_10.08.50.04L__release_271119_signed
I flashed all recoveries with ONE S all in one tool kit,
first i was with TWRP 2.5 i think , then i flashed 2.6, and 2.3.3.... now I flashed the stock recovery , still stuck...

looperman said:
well I think that it doesn't really matter which RUU I "used" because it doesn't even get me in the process of installing...
still , tried these two:
RUU_VILLEC2_U_ICS_40_S_HTC_Europe_2.15.401.100_Rad io_16.21.20.02U_16.09.20.11_M2_release_286571_sign ed
RUU_Ville_U_ICS_40_S_HTC_Europe_2.21.401.10_Radio_ 1.06s.50.02.27_2_10.08.50.04L__release_271119_sign ed
I flashed all recoveries with ONE S all in one tool kit,
first i was with TWRP 2.5 i think , then i flashed 2.6, and 2.3.3.... now I flashed the stock recovery , still stuck...
Click to expand...
Click to collapse
If you downloaded RUUs from androidruu, then it's a case of bad RUU.
Sent from my HTC One S using Tapatalk 4 Beta

khan.orak said:
If you downloaded RUUs from androidruu, then it's a case of bad RUU.
Sent from my HTC One S using Tapatalk 4 Beta
Click to expand...
Click to collapse
well what am I supposed to do ?

looperman said:
well I think that it doesn't really matter which RUU I "used" because it doesn't even get me in the process of installing...
still , tried these two:
RUU_VILLEC2_U_ICS_40_S_HTC_Europe_2.15.401.100_Radio_16.21.20.02U_16.09.20.11_M2_release_286571_signed
RUU_Ville_U_ICS_40_S_HTC_Europe_2.21.401.10_Radio_1.06s.50.02.27_2_10.08.50.04L__release_271119_signed
I flashed all recoveries with ONE S all in one tool kit,
first i was with TWRP 2.5 i think , then i flashed 2.6, and 2.3.3.... now I flashed the stock recovery , still stuck...
Click to expand...
Click to collapse
Okay, just now I noticed. You used two Different RUUs for two different versions.
The 1st one is for S3/C2 version, the 2nd one is for S4 version.
Use This Thread to download RUU's only for your version (S4 or S3 whichever you have got). In your case, it does matter which RUU you use.
If you need any help further just ask away.

the thing is that the RUU doesn't get to the process of installing , and I have used those RUU's before....
I need some solution the get to a working recovery and instal some kind of OS because the last time I could get in my recovery it said that I don't have any OS installed...

looperman said:
the thing is that the RUU doesn't get to the process of installing , and I have used those RUU's before....
I need some solution the get to a working recovery and instal some kind of OS because the last time I could get in my recovery it said that I don't have any OS installed...
Click to expand...
Click to collapse
okay you gonna need fastboot for this. What I have been successful with is:
1. Download an RUU (VERSION SPECIFIC!).
2. Go into Bootloader -> Then select FASTBOOT
3. Connect your Phone to PC. It should say Fastboot - USB mode.
4. Run the RUU, it will get you through all the steps.

khan.orak said:
okay you gonna need fastboot for this. What I have been successful with is:
1. Download an RUU (VERSION SPECIFIC!).
2. Go into Bootloader -> Then select FASTBOOT
3. Connect your Phone to PC. It should say Fastboot - USB mode.
4. Run the RUU, it will get you through all the steps.
Click to expand...
Click to collapse
doesn't work as I've told you , it happens with every RUU ... I get the Black screen with white HTC letters...
I think that what RUU does is : it updates the version my software I think it just doesn't place a new software right away( just an update), but as TWRP said I don't have OS installed...

can anyone help me ?

looperman said:
doesn't work as I've told you , it happens with every RUU ... I get the Black screen with white HTC letters...
I think that what RUU does is : it updates the version my software I think it just doesn't place a new software right away( just an update), but as TWRP said I don't have OS installed...
Click to expand...
Click to collapse
Man you're making this difficult. The more I want to help you, the more you become hasty.
RUU doesn't do what you think. It puts New software, updates firmware (hboot, radio, RECOVERY), so yes it is basically a one-stop solution.
Please calm down as panicking won't help.
Tell me your One S version (S3/S4) at least? so that we can move forward in right direction. and also your CID
Tell me what recoveries and RUU you tried. and what errors do you get while you run them.
EDIT: Thanks to @tivofool I forgot to mention that you have to RELOCK your bootloader before running RUU

I'm with S3
I wrote the 2 RUU's I tried to use,
before that i tried TWRP 2.5.0.0,2.3.0.0.,2.6 and finally I flashed factory stock recovery that's it and both my carrier and bl are unlocked
P.S. : Yeah i knew about the relocking but still stuck on black screen with white HTC Letters

looperman said:
I'm with S3
I wrote the 2 RUU's I tried to use,
before that i tried TWRP 2.5.0.0,2.3.0.0.,2.6 and finally I flashed factory stock recovery that's it and both my carrier and bl are unlocked
P.S. : Yeah i knew about the relocking but still stuck on black screen with white HTC Letters
Click to expand...
Click to collapse
Black Screen with HTC is the oem update screen.
Okay do this please and we'll try to see if there's a problem with the HBOOT. Give me this info and We'll reflash HBOOT.
Go to fastboot and connect your phone to PC.
Enter this command from your PC:
Code:
fastboot getvar all
post results here (MINUS IMEI AND SERIAL #)

just a second, I got a working recovery... I mean i can get in it and everything and I can mount the USB Storage too.
What Rom would you recommend ?

looperman said:
just a second, I got a working recovery... I mean i can get in it and everything and I can mount the USB Storage too.
What Rom would you recommend ?
Click to expand...
Click to collapse
That was fast.
I am using Viper ROM and it's very good. Customization and speed.
For a better battery life, BULLETPROOF KERNEL.
Edit: how did you get it to work by the way.

Viper rom is for s4 only isn't it ?

looperman said:
just a second, I got a working recovery... I mean i can get in it and everything and I can mount the USB Storage too.
What Rom would you recommend ?
Click to expand...
Click to collapse
Make sure you flash a S3 Rom (you mentioned having a s3 right?)
Sent from my HTC VLE_U using Tapatalk 2

looperman said:
Viper rom is for s4 only isn't it ?
Click to expand...
Click to collapse
Oh yes sorry.

okay, so ... I'm going to explane everything I did, I hope I'll help some other people too.
I flashed TWRP from One_S_All-In-One_Kit_v4.0 but without luck, then i flash the factory stock recovery, still the phone was letting me into any of these two recoveries, then i decided reflash the same TWRP again and it worked,
First I couldn't mount the storage from the recovery , but it was still showing in "My Computer" , I had only one option and it was to Format the Storage. So I did.. then copied this rom with gapps on it ---> http://forum.xda-developers.com/showthread.php?t=2164406
Fully wiped --> Flash Rom , then Flash Gapps, ---> then I booted in fastboot to boot from CMD the "boot.img" with "fastboot flash boot boot.img" from the Pacman Rom and then I Rebooted the HTC and Done
Huge thanks to @khan.orak
I hope I helped someone with the same ****tyass problem.

looperman said:
okay, so ... I'm going to explane everything I did, I hope I'll help some other people too.
I flashed TWRP from One_S_All-In-One_Kit_v4.0 but without luck, then i flash the factory stock recovery, still the phone was letting me into any of these two recoveries, then i decided reflash the same TWRP again and it worked,
First I couldn't mount the storage from the recovery , but it was still showing in "My Computer" , I had only one option and it was to Format the Storage. So I did.. then copied this rom with gapps on it ---> http://forum.xda-developers.com/showthread.php?t=2164406
Fully wiped --> Flash Rom , then Flash Gapps, ---> then I booted in fastboot to boot from CMD the "boot.img" with "fastboot flash boot boot.img" from the Pacman Rom and then I Rebooted the HTC and Done
Huge thanks to @khan.orak
I hope I helped someone with the same ****tyass problem.
Click to expand...
Click to collapse
Glad it worked for you buddy.

Help please

Hi.
I have a htc sensation.
Rom: vipers 3.1.4
S-ON
My touchscreen sometimes doesnt work, but if i turn off my screen(lock my screen), and turn it back on, it works.
Is this rom problem or touchscreen problem?
Thanks!

are you sure that you already flashing boot.img from the rom itself..?
what about if you tried installing another rom..?, is the problem still there ..?
if problem still there..so it can be your phone hardware had problem, but if not..then that's the problem come from the rom indeed

Sorry, but i dont understand ur first question .
I didnt try to install another rom yet. But i will install a new one tomorrow or thursday. I am not home now.
JJeamy said:
are you sure that you already flashing boot.img from the rom itself..?
what about if you tried installing another rom..?, is the problem still there ..?
if problem still there..so it can be your phone hardware had problem, but if not..then that's the problem come from the rom indeed
Click to expand...
Click to collapse

sneaki said:
Sorry, but i dont understand ur first question .
I didnt try to install another rom yet. But i will install a new one tomorrow or thursday. I am not home now.
Click to expand...
Click to collapse
i mean if you're phone bootloader just had unlocked but still S-ON..so you must flashing boot.img too that are extracted from the rom.zip that you already installed..
you pc must already had ADB / SDK...if not..you can download from here.. or minimal adb and fastboot from here..
1. extract the rom.zip that you already installing...and copied boot.img from there to adb / sdk folder on your pc
2. turn on your phone with pressing and hold volume down + power button until inside bootloader...then select FASTBOOT mode..
3. connect your phone to pc via usb...then open cmd and change source to your adb / sdk that fastboot.exe placed folder..then type "fastboot devices" enter (to check first that your phone already connected) if success connected that will be prompt your phone serial number
4. then continued typing "fastboot flash boot boot.img" enter
5. after finish..typing "fastbot reboot" enter
6. done..
all command type without quote
hope this can help..

So i bought this phone ~2 months ago. I had sense 5 on it. 4ext recovery. And i saw, that it was on S-on.
Than i wanted to try out vipers 3.1.4. I downloaded the rom. putted on my sd card, reboted to 4ext recovery, enabled smartflash. than wiped, and installed the rom. it was great until one morning when the touch kept freezing, and i needed to lock the screen and turn it back on to work.
Today i will install sense 5 again and doing the same thing that i did with 3.1.4.Am i doing something wrong?
And i need to do what are u saying after rom instalation or ? On my pc there isn't adb/sdk.
Sorry but i'm new to android. I was an iphone user.

sneaki said:
So i bought this phone ~2 months ago. I had sense 5 on it. 4ext recovery. And i saw, that it was on S-on.
Than i wanted to try out vipers 3.1.4. I downloaded the rom. putted on my sd card, reboted to 4ext recovery, enabled smartflash. than wiped, and installed the rom. it was great until one morning when the touch kept freezing, and i needed to lock the screen and turn it back on to work.
Today i will install sense 5 again and doing the same thing that i did with 3.1.4.Am i doing something wrong?
And i need to do what are u saying after rom instalation or ? On my pc there isn't adb/sdk.
Sorry but i'm new to android. I was an iphone user.
Click to expand...
Click to collapse
IF you already using 4ext recovery and enabling smartflash then...you don't needed to flashing boot.img again with manual way..
my guide in the previously post..just if you using another custom recovery like TWRP or CWM and already forget it to flashing boot.img manually form fastboot
so..this you're already do the right step...just try installing ViperS 5.0 again from 4ext recovery..then..your phone will back to normal again..:good:

Thank You! :good:
When i get home i will install sense 5 and hopefully my phone will be back to normal!
JJeamy said:
IF you already using 4ext recovery and enabling smartflash then...you don't needed to flashing boot.img again with manual way..
my guide in the previously post..just if you using another custom recovery like TWRP or CWM and already forget it to flashing boot.img manually form fastboot
so..this you're already do the right step...just try installing ViperS 5.0 again from 4ext recovery..then..your phone will back to normal again..:good:
Click to expand...
Click to collapse

sneaki said:
enabled smartflash. than wiped, and installed the rom..
Click to expand...
Click to collapse
just change some steps
wipe->smartflash->install rom

hi
my htc sensation xe doesn't turn on.none of its led doesn't light.please help me

rafael1369 said:
hi
my htc sensation xe doesn't turn on.none of its led doesn't light.please help me
Click to expand...
Click to collapse
do you tried with unbrick project? http://forum.xda-developers.com/showthread.php?t=1522351

I am back. I installed sense 5 but my Phone touch is the same. So i guess its hardware problem.
Sent from my HTCSensation using Tapatalk

sneaki said:
I am back. I installed sense 5 but my Phone touch is the same. So i guess its hardware problem.
Sent from my HTCSensation using Tapatalk
Click to expand...
Click to collapse
Maybe its about calibration the touch search the forum and I think you got to be s-off
Sent from my HTC Sensation 4G using xda app-developers app

Mile_zdr said:
Maybe its about calibration the touch search the forum and I think you got to be s-off
Sent from my HTC Sensation 4G using xda app-developers app
Click to expand...
Click to collapse
see also this
http://forum.xda-developers.com/showthread.php?t=1239238

Bootlooping if flashing cm 10.1 and newer

Hi there! i bought an htc one s and managed to flash cm 10.0.0. to it. my problem is that when i flash a newer cm version it bootloops everytime. i have installed twrp 2.6.3.0. .
baseband version:1.08ts.50.02.16
kernel version:3.0.51
s-off, rooted, hboot 2.15, CID 11111111
radio 0.16.31501s
Please any help would be appreciated.

Are you sure that you flashed the right version? Cyanogenmod official is only for ville (S4) version. Are you sure that you didnt flash ville version on villec2 or opposite?

Cvolton said:
Are you sure that you flashed the right version? Cyanogenmod official is only for ville (S4) version. Are you sure that you didnt flash ville version on villec2 or opposite?
Click to expand...
Click to collapse
i believe my htc is the s4 version. max freq 1512Mhz, and at bootloader screen writes vle.

Did you update the Kernel? Tryed to do the Wipes?

Cvolton said:
Did you update the Kernel? Tryed to do the Wipes?
Click to expand...
Click to collapse
no i didnt update the kernel. is it important to update the kernel? and if so how can i do this? i did the wipes

Of course you must update the kernel. Extract boot.img from the ZIP and put it in your folder with adb.exe fastboot.exe etc. (On the computer) then restart the phone into fastboot mode (volume down + power and choose fastboot), shift right click in the folder on PC and choose open command prompt here. Now type here "fastboot flash boot boot.img" and wait till the operation is done. Then reboot and enjoy
Odesláno z mého HTC One S pomocí Tapatalk

3555
Cvolton said:
Extract boot.img from the ZIP and put it in your folder with adb.exe fastboot.exe etc. (On the computer) then restart the phone into fastboot mode (volume down + power and choose fastboot), shift right click in the folder on PC and choose open command prompt here. Now type here "fastboot flash boot boot.img" and wait till the operation is done. Then reboot and enjoy
Odesláno z mého HTC One S pomocí Tapatalk
Click to expand...
Click to collapse
you mean to extract the zip file of the rom i flashed and flash the boot.img of that rom via fastboot?i thought that its not necessary if you have flashed twrp 2.6.3.0. recovery

Yes! Its necessary if you're S-ON
Sent from my VilleC2 using Czech localised Tapatalk

If you're S-ON:
On windows 7, 8 click on ROM.zip. You will see "boot.img". Drag it with mouse on ather folder.
After you wipe everything, except SD CARD, instal rom.
After instal, reboot bootloader. Plug the cable. On phone screen you will have "Fastboot USB"
Open comand promt: ""fastboot flash boot boot.img".
On S-ON phone never work without this.

null0seven said:
If you're S-ON:
On windows 7, 8 click on ROM.zip. You will see "boot.img". Drag it with mouse on ather folder.
After you wipe everything, except SD CARD, instal rom.
After instal, reboot bootloader. Plug the cable. On phone screen you will have "Fastboot USB"
Open comand promt: ""fastboot flash boot boot.img".
On S-ON phone never work without this.
Click to expand...
Click to collapse
Cvolton said:
Yes! Its necessary if you're S-ON
Sent from my VilleC2 using Czech localised Tapatalk
Click to expand...
Click to collapse
as you can see in my first post im S-OFF

tocamrd said:
as you can see in my first post im S-OFF
Click to expand...
Click to collapse
Sorry, blind in the last times :laugh:
However you could still try to do that... Or maybe the download is corrupted, did you check the MD5 checksum? That could be also the problem.

Cvolton said:
Sorry, blind in the last times :laugh:
However you could still try to do that... Or maybe the download is corrupted, did you check the MD5 checksum? That could be also the problem.
Click to expand...
Click to collapse
ok no prob. I tried that with no luck . im tring to flash a rom that i have already flashed to another htc one s so i dont think that this rom is corrupted. i can flash the rom through recovery and gapps and when the phone reboots nothing happen but keep looping... the only rom i can flash is cm 10. do i have to update radio or kernel or something other to my phone??

Sorry for my previous answer.
Flash a new recovery image. Latest is 2.7.0.8.
http://goo.im/devs/mdmower/htc-twrp

I finally gave the phone to a friend with cm 10.0 without trying something else. Thanks all for replies!!!

HTC ONE SV STUCK AT BLACKSCREEN. help please!

Hi,
I'm having problems with my HTC one SV. it powers on then it will show "htc quietly brilliance logo" and after that it shows black screen then stuck on it. i had this problem before so I remove the battery then power it on solves the problem but lately it does not work anymore lets say it's like 1/100 before it goes thourgh. i really dont know what to do tried searching for solutions just cant get it. I'm kinda newbie on terms so if anyone can help me I'm very thankful.
Thank you in Advance!

Seems like a common problem for many HTC One SV's.
Take a look in the Q&A section, there should be many threads, where i described what to do. As long as it's no US carrier phone, then things are different.
Basically:
- unlock your phone with htcdev.com (all data is lost)
- flash TWRP recovery with fastboot
- flash a rom for your model

old.splatterhand said:
Seems like a common problem for many HTC One SV's.
Take a look in the Q&A section, there should be many threads, where i described what to do. As long as it's no US carrier phone, then things are different.
Basically:
- unlock your phone with htcdev.com (all data is lost)
- flash TWRP recovery with fastboot
- flash a rom for your model
Click to expand...
Click to collapse
my phone is from middle east. i assume that its all in htcdev.com? like step by step on what to do? honestly i really don't know how to flash TWRP, flash a rom and etc. I'm just having a hard time learning maybe because it's 1st time for to do it plus I'm not yet familiar with it.

You needto learn, how to use fastboot cmd, otherwise i guess your phone is lost.
But its not so hard, if you can use a computer
At htcdev you can get the basic fastboot files you need.
Try to read and follow the unlock guide, then we see how far we come.

old.splatterhand said:
You needto learn, how to use fastboot cmd, otherwise i guess your phone is lost.
But its not so hard, if you can use a computer
At htcdev you can get the basic fastboot files you need.
Try to read and follow the unlock guide, then we see how far we come.
Click to expand...
Click to collapse
Hi,
im having hard time. tried to follow the steps on htcdev but im having error. here is the message.
"the program can't start because adbwinapi.dll is missing from your computer. Try reinstalling the program to fix the problem.
any idea on how fix this?

phuge17 said:
adbwinapi.dll is missing
any idea on how fix this?
Click to expand...
Click to collapse
This dll should be in the package that you have downloaded from htcdev.

old.splatterhand said:
This dll should be in the package that you have downloaded from htcdev.
Click to expand...
Click to collapse
Hi,
I managed to unlock my phone , TWRP and all that. i also downloaded your "[ROM]Stock odexed Android 4.2.2 Sense 5 " for k2_ul. i followed your instruction on how to install by the way mine is S-on so flash with fastboot (fastboot flash boot boot.img) am I correct? i see some okay it was kinda fast so i feel weird i thought the installing will take a minute or so because its almost 1gig file download. anyway the only thing i did not do is this part "Don't forget to flash Superuser file (look into my index thread) if you want root!" actually i really dont know what you mean by that sorry. my phone still not yet booting still stuck at blackscreen.
UPDATE** phone is just restarting over over again from htc quietly brilliant >> power off >> htc quietly brilliant >> power off.

phuge17 said:
Hi,
I managed to unlock my phone , TWRP and all that. i also downloaded your "[ROM]Stock odexed Android 4.2.2 Sense 5 " for k2_ul. i followed your instruction on how to install by the way mine is S-on so flash with fastboot (fastboot flash boot boot.img) am I correct? i see some okay it was kinda fast so i feel weird i thought the installing will take a minute or so because its almost 1gig file download. anyway the only thing i did not do is this part "Don't forget to flash Superuser file (look into my index thread) if you want root!" actually i really dont know what you mean by that sorry. my phone still not yet booting still stuck at blackscreen.
UPDATE** phone is just restarting over over again from htc quietly brilliant >> power off >> htc quietly brilliant >> power off.
Click to expand...
Click to collapse
Why install an odex 4.2.2 Rom when your 4.2.2 Rom is odex by stock?

phuge17 said:
Hi,
I managed to unlock my phone , TWRP and all that. i also downloaded your "[ROM]Stock odexed Android 4.2.2 Sense 5 " for k2_ul. i followed your instruction on how to install by the way mine is S-on so flash with fastboot (fastboot flash boot boot.img) am I correct? i see some okay it was kinda fast so i feel weird i thought the installing will take a minute or so because its almost 1gig file download. anyway the only thing i did not do is this part "Don't forget to flash Superuser file (look into my index thread) if you want root!" actually i really dont know what you mean by that sorry. my phone still not yet booting still stuck at blackscreen.
UPDATE** phone is just restarting over over again from htc quietly brilliant >> power off >> htc quietly brilliant >> power off.
Click to expand...
Click to collapse
Have you done a wipe in recovery before flashing the new rom?
SHM said:
Why install an odex 4.2.2 Rom when your 4.2.2 Rom is odex by stock?
Click to expand...
Click to collapse
Usually it it is.

old.splatterhand said:
Have you done a wipe in recovery before flashing the new rom?
Usually it it is.
Click to expand...
Click to collapse
sorry it took me weeks before i reply. anyway i did wipe the phone. are there any like reset command while on fast boot or something so that i can start from the beginning? actually im a bit lost.

Boot to recovery -> Wipe menu -> Advanced Wipe and wipe System, data, cache, dalvik cache.
Then go to Install and flash the rom for your model.
Then boot to fastboot and flash the boot.img of the rom with fastboot cmd fastboot flash boot boot.img
If that does not bring your phone back to life, something else is wrong.