Related
So i guess I felt out of date and wanted to root my phone and use that cm10 rom or whatever everyone else is and i messed it up real bad. I keep getting this msg "this build is for development purposes only do not distribute outside of htc.." on the loading screen. At this point i just want to restore it back to normal , idc if i lose data , i just want my phone to WORK! I've flashed a clean recovery.img but whenever i try to access recovery , it brings me back to that screen with the red words. In addition , my phone is rogers so i can't even find a correct RUU to install. Does anyone have any suggestions as to how I can get my phone to work again ? Any help is greatly welcomed !
P.S Wow i think it got worse , now it doesnt even loop again , it goes start into that menu bootloader, reboot , power down.. Omg i spent 5 hours looking into this. I NEED HELP!
Lasts3cond said:
So i guess I felt out of date and wanted to root my phone and use that cm10 rom or whatever everyone else is and i messed it up real bad. I keep getting this msg "this build is for development purposes only do not distribute outside of htc.." on the loading screen. At this point i just want to restore it back to normal , idc if i lose data , i just want my phone to WORK! I've flashed a clean recovery.img but whenever i try to access recovery , it brings me back to that screen with the red words. In addition , my phone is rogers so i can't even find a correct RUU to install. Does anyone have any suggestions as to how I can get my phone to work again ? Any help is greatly welcomed !
P.S Wow i think it got worse , now it doesnt even loop again , it goes start into that menu bootloader, reboot , power down.. Omg i spent 5 hours looking into this. I NEED HELP!
Click to expand...
Click to collapse
..... It says that on every One X, it's HTC telling whoever turns the phone on that you used HTCDev.com
Make Sure you have TWRP (recovery) flashed/installed ... then in the bootloader go into recovery and flash cm10 ... and since you probably have the newer hboot 1.14 that means that you HAVE to flash the kernel (boot.img) via fastboot
Which is simple,
flash cm10
then reboot into the bootloader > fastboot
extract the boot.img from the cm10.zip
and fastboot flash boot boot.img
then your done reboot and enjoy.... (anything else read threw the forum, all your answers have been asked by somebody else already)
On rogers he won't have the 1.14 hboot, which means all he has to do is install the rom.
Try flashing the recovery again (TWRP ONLY!)
And then reinstall CM10
Tachi91 said:
..... It says that on every One X, it's HTC telling whoever turns the phone on that you used HTCDev.com
Make Sure you have TWRP (recovery) flashed/installed ... then in the bootloader go into recovery and flash cm10 ... and since you probably have the newer hboot 1.14 that means that you HAVE to flash the kernel (boot.img) via fastboot
Which is simple,
flash cm10
then reboot into the bootloader > fastboot
extract the boot.img from the cm10.zip
and fastboot flash boot boot.img
then your done reboot and enjoy.... (anything else read threw the forum, all your answers have been asked by somebody else already)
Click to expand...
Click to collapse
Can you post download to to what you're refering to ? I want to delete all my old files and redownload it all, starting fresh.
ugh crap im so lost , i don't get what to install like .. i flash CWM and it doesnt work and all that omg . Can we skype or somethng so we can do this step by step ? :$
Lasts3cond said:
i flash CWM and it doesnt work and all that omg
Click to expand...
Click to collapse
That might be your problem. CWM isn't supported for this phone and has been known to corrupt data.
Links for all the files you need are in a sticky in the Development forum. Here's the link for TWRP:
http://forum.xda-developers.com/showthread.php?t=1677447
Once you've got that, you can wipe your phone inside TWRP (don't do it in bootloader--you'll have to reformat your sd card), and reflash CM10.
That link requires me to use that GOO manager? Confused lol i have TWRP on my computer but not sure the steps to use it ..
Lasts3cond said:
That link requires me to use that GOO manager? Confused lol i have TWRP on my computer but not sure the steps to use it ..
Click to expand...
Click to collapse
You can't use Goomanager if the phone doesn't boot. You need to push it over to your phone using adb, then you can flash it from recovery.
redpoint73 said:
You can't use Goomanager if the phone doesn't boot. You need to push it over to your phone using adb, then you can flash it from recovery.
Click to expand...
Click to collapse
Lol yeah i understand that and adb? I can't even past the screen where it shows fastboot , factory rest , shut down .. etc
Lasts3cond said:
Lol yeah i understand that and adb? I can't even past the screen where it shows fastboot , factory rest , shut down .. etc
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1754018
iElvis said:
http://forum.xda-developers.com/showthread.php?t=1754018
Click to expand...
Click to collapse
Beat me to it.
Read up, get adb working. Then you can install TWRP using adb.
So first i need to get adb working , then install TWRP to wipe my phone? To access that i flash TWRP and go into recovery right ?
EDIT: So .. i've downloaded that adb , and i got a bunch of files.. what do i do with this? I put them into my fastboot folder in my C drive.. Also i need to unlock my phone to do this right ? Cause i accidently relocked it .
EDIT: OKAY i rooted my phone , and got into TWRP , tried a factory rest under the wipe menu. http://i48.tinypic.com/13yklep.jpg It says fails.. what do i do ?
Go to mount usb storage (not sure which screen its on) while it's plugged into your computer
If windows says the card is corrupted, format it fat32, then copy over a rom onto your sd card
area51avenger said:
Go to mount usb storage (not sure which screen its on) while it's plugged into your computer
If windows says the card is corrupted, format it fat32, then copy over a rom onto your sd card
Click to expand...
Click to collapse
Okay got into mount http://i47.tinypic.com/2cq085x.jpg then a screen pops up , is this the one? http://i45.tinypic.com/m7ur08.jpg
EDIT: Okay so i need to copy a rom onto my phone via usb. Do i copy over the boot.img,system and NETA-INF from cm10 ?
So i put the cm10 zip onto my sdcard (my phone) and i got this when i want to install .. should i proceed? http://i45.tinypic.com/28uts7n.jpg
WAIT NOOOOO
That is an international rom
Get CM10 from THIS FORUM ONLY
http://forum.xda-developers.com/showthread.php?t=1790032
area51avenger said:
WAIT NOOOOO
That is an international rom
Get CM10 from THIS FORUM ONLY
http://forum.xda-developers.com/showthread.php?t=1790032
Click to expand...
Click to collapse
LOL okay ! But on that thread isnt that cm10 for AT&T HTC XL? :S I have a Htc one x rogers .
Lasts3cond said:
LOL okay ! But on that thread isnt that cm10 for AT&T HTC XL? :S I have a Htc one x rogers .
Click to expand...
Click to collapse
The Rogers HTC One X IS a HTC One XL. Rogers just branded it. The OneX has the Tegra 3 Quad Core Processor, the One XL has the S4 Dual Core Processor. Your phone is the same as the ATT Version. Trust me
Okay got the evita one but it still says same msg , should i proceed? :S
lasts3cond said:
okay got the evita one but it still says same msg , should i proceed? :s
Click to expand...
Click to collapse
omfg it works ty so much!
No problem. Just be glad you didn't flash an international Rom. They can render your device completely unusable. Remember only flash things from this forum and enjoy
Sent from my HTC One XL using xda app-developers app
area51avenger said:
No problem. Just be glad you didn't flash an international Rom.
Click to expand...
Click to collapse
After all that, lol. At least he had the sense to stop and ask.
Hi all. Ive finally managed to get a grasp of the principles of adb, shell, fastboot, etc.
Anyways - I have a Desire S which I unlocked via htcdev, and installer the lastest clockworkmod recovery. ive been trying to get S-off and nothing has worked for me. Ive spent the last 2 days downloading so much stuff my desktop if full of it - and im nowhere.
I had ICS for htc running before without any mods and wanted to try the root / mod thing.
My phone hangs at the htc boot screen. I have tried installing 3 different cw10.1 zip files all from xda to no avail, they always give me an error. Ive tried running the RUU exe and it ends in an error. I then fund the rom.zip file in the directory and renamed it to PB99IMG.zip, dropped it in root of sdcard and nothing.. it just skips past the lines and goes to fastboot. Should it not be named PB88IMG.zip? I recall seeing those numbers flit past.
Is it possible to force the bastard phone to take cwm this way by renaming the zip? (Ive read no - its only for official RUU's).
anyway - the oneclick didnt work, nor did ver1, ive tried various shell methods (which i cant even recall). Im currentlyunlocked, S-ON, firmware 20.2.2000 or something (the one that revolutionary WONT work on).
Ive been chasing my tail and just gave up.
please give me some info as to what i could have dobe wrong. I installed clockwork via lpay store. I factory reset, cleared caches and batt logs and was able to go into the OS a few times - but obviously one of the methods i tried did something.
thanks again great forum, but honestly, what a complete mess!! there are so many approaches with so many pitfalls its crazy.. esp for a noob when the noob apps dont work either!
HTC Desire S GSM
unclocked via htcdev
S-ON
hboot: 2.02.0002
Radio: 3831.19.00.110
Latest CMWR
Gets stuck @ white screen
Tried:
factory reset / wipe / dalvik / batt stats
reboot to recovery: install SU, gapps, cwm rom 10.1 (also tried 7.1). reboot / then fastboot boot boot.img (from the CWM zip). nothing.
Ive tried re installing the EU RUU - also nothing. Renaming the rom.zip to PG**IMG.zip, it reading the file then stops 2 fastboot screen. nothing. nada.zip.
fstarockr said:
Hi all. Ive finally managed to get a grasp of the principles of adb, shell, fastboot, etc.
Anyways - I have a Desire S which I unlocked via htcdev, and installer the lastest clockworkmod recovery. ive been trying to get S-off and nothing has worked for me. Ive spent the last 2 days downloading so much stuff my desktop if full of it - and im nowhere.
I had ICS for htc running before without any mods and wanted to try the root / mod thing.
My phone hangs at the htc boot screen. I have tried installing 3 different cw10.1 zip files all from xda to no avail, they always give me an error. Ive tried running the RUU exe and it ends in an error. I then fund the rom.zip file in the directory and renamed it to PB99IMG.zip, dropped it in root of sdcard and nothing.. it just skips past the lines and goes to fastboot. Should it not be named PB88IMG.zip? I recall seeing those numbers flit past.
Is it possible to force the bastard phone to take cwm this way by renaming the zip? (Ive read no - its only for official RUU's).
anyway - the oneclick didnt work, nor did ver1, ive tried various shell methods (which i cant even recall). Im currentlyunlocked, S-ON, firmware 20.2.2000 or something (the one that revolutionary WONT work on).
Ive been chasing my tail and just gave up.
please give me some info as to what i could have dobe wrong. I installed clockwork via lpay store. I factory reset, cleared caches and batt logs and was able to go into the OS a few times - but obviously one of the methods i tried did something.
thanks again great forum, but honestly, what a complete mess!! there are so many approaches with so many pitfalls its crazy.. esp for a noob when the noob apps dont work either!
Click to expand...
Click to collapse
There are so many people, blindly walking in to troubles just because they do not read,
and you seem to be one of them....
When you unlock your device via htc dev, your device stays s- on,
it means- whatever you flash, you have to flash boot.img from that thing ( meaning rom naturaly )
via fastboot
through command:
fastboot flash boot boot .img
Without it your phone will never boot...
Recovery you flash via fastboot as well via command:
fastboot flash recovery recovery.img
Then , when you have it, reboot your device to recovery
and flash superuser and its binaries
And that woud be all you have to do in order to have rooted and booting device...
Edit: Now i've seen your other post- it is a 100% the one im reading now,
You should know it is enough to post your question once,
people'll find it...
Because of impatience you're in trouble already with your phone
tx -
tx for that info - ill give it a go.
I reposted because some1 there said i was in the wrong section and supplied a link for the correct section (here) - so yes, i reposted to get the correct replies.
not to digress:
but as for not reading - i can assure u ive read alot. Been a freelance developer for 15 years. That doesnt mean that rooting often requires a handful of little hacks when things dont go smooth. Just like alot of programming tuts, the rooting ones have a similar "assumption" that u know whats half potting, and what will cause what and what wont. All the articles i read i made sure were either 2012 or 2013 - there is ALOT of old non applicable info around, I stick to xda of course as i really trust this place. as usual, not all is 1-2-3. thats all.
asgardr said:
There are so many people, blindly walking in to troubles just because they do not read,
and you seem to be one of them....
When you unlock your device via htc dev, your device stays s- on,
it means- whatever you flash, you have to flash boot.img from that thing ( meaning rom naturaly )
via fastboot
through command:
fastboot flash boot boot .img
Without it your phone will never boot...
Recovery you flash via fastboot as well via command:
fastboot flash recovery recovery.img
Then , when you have it, reboot your device to recovery
and flash superuser and its binaries
And that woud be all you have to do in order to have rooted and booting device...
Edit: Now i've seen your other post- it is a 100% the one im reading now,
You should know it is enough to post your question once,
people'll find it...
Because of impatience you're in trouble already with your phone
Click to expand...
Click to collapse
Well thats true, obvious things for me do not have to be obvious for
somebody else- one sometimes forgets that- begging your pardon
If not for XDA, i'd've known not much at all...
I've given the shortest and simpliest way that never failed me before
so, i truly hope, for you it'll turn out to be usefull as well- with no further accidents...
As for comming back to stock: you must relock device's bootloader before flashing,
otherwise procedure will always be throwing an error....
Success
details details
As for coming back to stock: you must relock device's bootloader before flashing,
otherwise procedure will always be throwing an error....
Im trying to get a picture of the inter relations ~ pls bear with me:i dont want to be trying to sys c: when i dont have a partition kind of scenario - absolute clarity is needed - my apologies as i try wrap this up..
#bootloader:
do the same rules apply for ALL installations? Does bootloader have to be locked FOR anything to boot or just the stock OS's? does it have to be in a sequence - ie do i have to do this each time i try install an OS or can i leave it? Will this break the booting if its wrong? Can i use a bootloader from company X and a rom from company Y? What files do i use/extract/where do i get them, and are they device specific - what r the base requirements?
#S-on/Off
I have been unable to get mine to off -
#unlocked bootloader
its been indicated that this will throw off a stock OS installer, will cyanogenmod work with this off?
#RUU / Mods
I assume these are the OS's - do i have to do this last/middle? and steps after? to duplicate: are they linked to the bootloader?
#recovery
this is just an upgrade to the stock junk and has no effect on booting, etc. can be left in place if working. can install via play or fastboot via zip. (and other methods im sure).
Im trying to figure out what i can do once, and what i have to keep fiddling with, so i can hone in and get up and running.
If my questions appear ignorant - then ignore me. Im trying to paint a very clear picture of the tech relations between the various aspects and how they relate / interact - which is crucial to moving on from noobness - so pls bear with me and drop the remarks / attitude. Ive read my a$$ off and am still unclear for what many assume is basic understanding.
Im sure there are ALOT of sane unlazy logic ppl out there stuck in the same boat - and sometimes ppl who are VERY knowledgeable get a bit semi-aggressive putting ppl off from asking questions.
So do i relock the bootloader before i install any mod - or is this for stock only? And do install stock first, or can i relock and follow the steps above to root / get cwm 10.7 or 7.1 running?
lastly - where do i get the boot.img from? is that device specific or can i extract it / dl it? reason im asking is because it appears this file is device specific - and needs to be backed up from stock device before rooting/unlocking etc?
Success[/QUOTE]
fstarockr said:
Hi all. Ive finally managed to get a grasp of the principles of adb, shell, fastboot, etc.
Anyways - I have a Desire S which I unlocked via htcdev, and installer the lastest clockworkmod recovery. ive been trying to get S-off and nothing has worked for me. Ive spent the last 2 days downloading so much stuff my desktop if full of it - and im nowhere.
I had ICS for htc running before without any mods and wanted to try the root / mod thing.
My phone hangs at the htc boot screen. I have tried installing 3 different cw10.1 zip files all from xda to no avail, they always give me an error. Ive tried running the RUU exe and it ends in an error. I then fund the rom.zip file in the directory and renamed it to PB99IMG.zip, dropped it in root of sdcard and nothing.. it just skips past the lines and goes to fastboot. Should it not be named PB88IMG.zip? I recall seeing those numbers flit past.
Is it possible to force the bastard phone to take cwm this way by renaming the zip? (Ive read no - its only for official RUU's).
anyway - the oneclick didnt work, nor did ver1, ive tried various shell methods (which i cant even recall). Im currentlyunlocked, S-ON, firmware 20.2.2000 or something (the one that revolutionary WONT work on).
Ive been chasing my tail and just gave up.
please give me some info as to what i could have dobe wrong. I installed clockwork via lpay store. I factory reset, cleared caches and batt logs and was able to go into the OS a few times - but obviously one of the methods i tried did something.
thanks again great forum, but honestly, what a complete mess!! there are so many approaches with so many pitfalls its crazy.. esp for a noob when the noob apps dont work either!
HTC Desire S GSM
unclocked via htcdev
S-ON
hboot: 2.02.0002
Radio: 3831.19.00.110
Latest CMWR
Gets stuck @ white screen
Tried:
factory reset / wipe / dalvik / batt stats
reboot to recovery: install SU, gapps, cwm rom 10.1 (also tried 7.1). reboot / then fastboot boot boot.img (from the CWM zip). nothing.
Ive tried re installing the EU RUU - also nothing. Renaming the rom.zip to PG**IMG.zip, it reading the file then stops 2 fastboot screen. nothing. nada.zip.
Click to expand...
Click to collapse
i think u have MDDI pannel (not the one compatible with cianogen) try to flash a sense rom
have a look of THIS
Hi
#bootloader:
do the same rules apply for ALL installations? Does bootloader have to be locked FOR anything to boot or just the stock OS's? does it have to be in a sequence - ie do i have to do this each time i try install an OS or can i leave it? Will this break the booting if its wrong? Can i use a bootloader from company X and a rom from company Y? What files do i use/extract/where do i get them, and are they device specific - what r the base requirements?
Click to expand...
Click to collapse
On HTC devices, the bootloader is called HBOOT. This is a 100% device-specific program whose sole purpose is to initialize the hardware so that an operating system (such as Android, i.e. Linux) can load. If your bootloader is damaged, your device is 100% bricked.
To prevent tampering with the system, HTC have locked ("S-ON") their bootloaders so that they won't accept unsigned ROM images. So, on your HTC phone, you cannot install any operating system other than what's provided by HTC. You can partially lift these restrictions by unlocking via htcdev, as you have, or you can fully lift all restrictions on your device by going S-OFF. S-OFF-ing the Desire S is done by exploiting a bug in HBOOT version 0.98 and overwriting the bootloader with a patched version ("Revolutionary") that has all write protection disabled.
In order to flash official HTC upgrade packages ("RUU"s), you can be either S-ON or S-OFF, but if you're S-ON you MUST lock the bootloader. Anything that's not a RUU can (only) be flashed without re-locking the bootloader.
Having an unlocked bootloader is only relevant when flashing new ROMs or recoveries. Having an unlocked or locked bootloader per se will not affect booting at all, with one well-known exception: if you're S-ON and htcdev unlocked, the write protection installed by the bootloader is still on for the bootloader, radio, and kernel partitions. This means that you can't flash kernels from a running OS -- only from the bootloader. This means that when you flash a custom ROM, it will not be able to flash the kernel automatically, you have to do that manually via fastboot. Failing to do that will result in your phone freezing on the white HTC screen when it tries to boot.
#S-on/Off
I have been unable to get mine to off -
Click to expand...
Click to collapse
That's expected, because you're most likely not running a ROM that has a HBOOT version that is vulnerable to the exploit used by Revolutionary.
edit: nope, your HBOOT is newer than 0.98 and is therefore not exploitable.
#unlocked bootloader
its been indicated that this will throw off a stock OS installer, will cyanogenmod work with this off?
Click to expand...
Click to collapse
Only official HTC RUUs require that the bootloader be locked.
Cyanogenmod can only be installed with the bootloader unlocked, but you may always re-lock after installing it. Remember to manually flash the boot.img (that's the kernel) via fastboot directly after flashing CM through your custom recovery.
#RUU / Mods
I assume these are the OS's - do i have to do this last/middle? and steps after? to duplicate: are they linked to the bootloader?
Click to expand...
Click to collapse
A RUU is a *complete* software package for your device made by HTC. It contains everything from bootloader to operating system. I don't really know what else you're trying to ask, so please elaborate.
#recovery
this is just an upgrade to the stock junk and has no effect on booting, etc. can be left in place if working. can install via play or fastboot via zip. (and other methods im sure).
Click to expand...
Click to collapse
The recovery is a specialized mini-Android OS that allows you to flash new software (such as unofficial ROMs such as CM) to your device. What recovery you have installed has no bearing on your main OS. If you're htcdev unlocked, the only way you can install a custom (i.e. non-stock and non-crippled) recovery is via fastboot; if you're S-OFF you can use the 4EXT updater app from Google Play.
So do i relock the bootloader before i install any mod - or is this for stock only? And do install stock first, or can i relock and follow the steps above to root / get cwm 10.7 or 7.1 running?
Click to expand...
Click to collapse
Why do you want to install stock?
lastly - where do i get the boot.img from? is that device specific or can i extract it / dl it? reason im asking is because it appears this file is device specific - and needs to be backed up from stock device before rooting/unlocking etc?
Click to expand...
Click to collapse
boot.img is inside the zip of the ROM you're going to flash.
I hope I've been able to answer most of your questions. If you require more help, please search first, and if you can't find what you're looking for, please do ask.
fstarockr said:
Im trying to get a picture of the inter relations ~ pls bear with me:i dont want to be trying to sys c: when i dont have a partition kind of scenario - absolute clarity is needed - my apologies as i try wrap this up..
#bootloader:
do the same rules apply for ALL installations? Does bootloader have to be locked FOR anything to boot or just the stock OS's? does it have to be in a sequence - ie do i have to do this each time i try install an OS or can i leave it? Will this break the booting if its wrong? Can i use a bootloader from company X and a rom from company Y? What files do i use/extract/where do i get them, and are they device specific - what r the base requirements?
#S-on/Off
I have been unable to get mine to off -
#unlocked bootloader
its been indicated that this will throw off a stock OS installer, will cyanogenmod work with this off?
#RUU / Mods
I assume these are the OS's - do i have to do this last/middle? and steps after? to duplicate: are they linked to the bootloader?
#recovery
this is just an upgrade to the stock junk and has no effect on booting, etc. can be left in place if working. can install via play or fastboot via zip. (and other methods im sure).
Im trying to figure out what i can do once, and what i have to keep fiddling with, so i can hone in and get up and running.
If my questions appear ignorant - then ignore me. Im trying to paint a very clear picture of the tech relations between the various aspects and how they relate / interact - which is crucial to moving on from noobness - so pls bear with me and drop the remarks / attitude. Ive read my a$$ off and am still unclear for what many assume is basic understanding.
Im sure there are ALOT of sane unlazy logic ppl out there stuck in the same boat - and sometimes ppl who are VERY knowledgeable get a bit semi-aggressive putting ppl off from asking questions.
So do i relock the bootloader before i install any mod - or is this for stock only? And do install stock first, or can i relock and follow the steps above to root / get cwm 10.7 or 7.1 running?
lastly - where do i get the boot.img from? is that device specific or can i extract it / dl it? reason im asking is because it appears this file is device specific - and needs to be backed up from stock device before rooting/unlocking etc?
Click to expand...
Click to collapse
# bootloader
The bootloader must be locked to install an RUU (stock rom), it must be unlocked to install a custom rom.
# s-on / s-off
If you unlock your bootloader through htcdev.com, the phone stays s-on. This means you can't install a different radio or hboot (mostly not necessary anyway), or write to the /boot partition or recovery apart from in fastboot.
That means, after every rom installation, you have to reboot to bootloader (fastboot), and flash the boot.img (extracted from the rom you installed)
# recovery
A custom recovery is a must for flashing custom roms (it's where you flash the zips) , I recommend 4ext, other known recoveries are Cwm and twrp. Be aware that you can only flash recoveries in fastboot (not through an app) , if your device is s-on
1.s-off means you can flash anything you want to all partitions on the phone..
S- on (htc dev unlocked) bootloader is unlocked so you gain acces to system partition,
but neither to radio partition nor bootloader itself, so you cannot freely change them at will.
While flashing rom via recovery, ( when s-on) each time you'll have to flash boot.img of that rom -via fastboot as well, because kernel partition is not reachable from recovery ,
Boot img is to bo found in the rom zip ( namely boot.img).
and is absolutely necessary to flash that particular one
or, if existing- other that is compatible with rom of you choice and phone model..
Assuming- to flash any custom:
-bootloader has to be unlocked
-you need custom recovery ( 4ext or clockworkmod)
-rom is packed in zip format ( flashing via recovery)
-each time you change roms, you have to flash boot img of that particular rom,
( to be found inside that rom.zip)
from recovery must reboot to bootloader (adb reboot bootloader)
then flash boot.img...
If it says ok you may now begin booting in to system
Recovery:
To flash anything like roms or mods etc.
custom recovery is required,
stock htc recovery is been there for slightly different purpose,
and is, well.. rather useless for any device customizing...
1.when s-on: is necessary to flash recovery via fastboot-as an < .img > file
so, when it is zipped- extract the file: xxxyy_recovery .img,
change its name just to recovery.img, and flash it...
2.when s-off : is possible to update it via market app (but only when s-off)
RUU: is a stock phone image, and ussualy contains radio and bootloader itself,
flashing it, may upgrade your device's components that normally -while s-on-
you'd not be able to touch, but there is a price:
1.you must relock bootloader: fastboot oem lock
otherwise you'll always be getting an error
(but if you still keep unlock_token from htc dev-can unlock it again)
2.you must establish
A) your device's CID - Customer IDentification number (whether is generic or carrier branded)
B) your phone's software version region ( wwe or asia or..etc)
C) software version ( froyo, gb, ics )
because, normally bootloader will not let you flash lower RUU version
than itself,
( every RUU contains bootloader, so the one working on the device
will never let downgrade itself- well not without a little trick of course-this is XDA)
Bootloader:
It is advised to use only bootloaders for your device- if you try to flash something slse,
you'll end up with a dead phone ( no fastboot no nothing- paperweight)
While s-on you cannot upgrade bootloader in any other way but by flashing official RUU...
While s-off it is possible to write to bootloader partition ( but always a bit risky)
There are:
- stock bootloaders
- patched ( revolutionary )
- eng bootloaders ( modified - possible to overwrite it by different one in case it is necessary)...
...well... now, there is much more to it if one wants to know everything
if there is something you'd like to know in particular- write back...
fantastic answers and explanations last 3 chaps!!!!
Guys - excellent answers thank you SO much! i have a MUCH better idea now thanks to your no attitude clear answers! I think this should be a sticky as it clears SOOO much confusion for a multitude of users - and fills the forums with the same problems over and over - simply because ppl lack this base understanding b4 opening the darn prompt lol (like me!!)
So to recap"
While flashing rom via recovery, ( when s-on) each time you'll have to flash boot.img of that rom -via fastboot as well, because kernel partition is not reachable from recovery ,
Click to expand...
Click to collapse
so by following these directions:
Assuming- to flash any custom:
-bootloader has to be unlocked
-you need custom recovery ( 4ext or clockworkmod)
-rom is packed in zip format ( flashing via recovery)
-each time you change roms, you have to flash boot img of that particular rom,
( to be found inside that rom.zip)
from recovery must reboot to bootloader (adb reboot bootloader)
then flash boot.img...
If it says ok you may now begin booting in to system
Click to expand...
Click to collapse
im basically working around the S-On / kernel & partition issue i take it?
Im gonna try all this now - reason i wanted to flash stock
Why do you want to install stock?
Click to expand...
Click to collapse
is so that i can apply the earlier exploits to gain S-Off - but ill try the steps above and see.
fwiw - at this point im only downloading roms specifically for my phone - its my 1st so im going with stable ones, cyanogen for now. Once I have a better grip ill explore after that
btw:
A RUU is a *complete* software package for your device made by HTC. It contains everything from bootloader to operating system. I don't really know what else you're trying to ask, so please elaborate.
Click to expand...
Click to collapse
I was trying to figure out if the OS / roms / RUU had to be tied to boot images - as it appears they do, and whether there was a specific sequence to installing them). Since u clarified the RUU's are all-in-ones i guess the installer takes care of that, where as the others have pointed out - flashing custom roms require the boot.img to be flashed AFTER installing the rom - not the best question i admit!!
If your bootloader is damaged, your device is 100% bricked.
Click to expand...
Click to collapse
So if i can access fastboot etc then i can assume mine is fine right?
Thanks again guys - if there was a ribbon bar instead of just thanks id hit all of u a few times - im SURE many noobs will find all this info really really helpful. Its hard to tie the parts together and get an idea of how they all fit - its really puzzling.. and I know u gotta break something before u really understand it - but its nice to avoid this if possible!
Ill keep u posted on progress/results
no luck .... yet
got it working guys - had to flash boot img BEFORE rom, not after.
cyanogen mod 10.1 running on Desire s.
2 days of pain over
fstarockr said:
so by following these directions:
im basically working around the S-On / kernel & partition issue i take it?
Click to expand...
Click to collapse
Exactly.
Im gonna try all this now - reason i wanted to flash stock
is so that i can apply the earlier exploits to gain S-Off - but ill try the steps above and see.
Click to expand...
Click to collapse
That's a valid reason, but in that case you don't need to flash a custom rom first. You just need to use misc_version to lower your mainversion (a fastboot variable) and then you must flash an old (exploitable) RUU. There are numerous guides on how to do this.
I was trying to figure out if the OS / roms / RUU had to be tied to boot images - as it appears they do, and whether there was a specific sequence to installing them). Since u clarified the RUU's are all-in-ones i guess the installer takes care of that, where as the others have pointed out - flashing custom roms require the boot.img to be flashed AFTER installing the rom
Click to expand...
Click to collapse
Correct, but only if you're S-ON and htcdev unlocked. If you're S-OFF the recovery has no problem writing the boot image by itself.
So if i can access fastboot etc then i can assume mine is fine right?
Click to expand...
Click to collapse
Hell, the mere fact that you can turn on your device means your bootloader is fine
got it working guys - had to flash boot img BEFORE rom, not after.
Click to expand...
Click to collapse
No you don't? The order doesn't matter, as long as you've flashed both.
Hi, everything messed up from using the stupid TWRP 2.6.0.0 .... I was going to flash a custom rom , but it didn't let me, so I did a little research that I need 2.3.3.0 in order to instal any custom rom.So I tried to switch to 2.3.3.0 but it didn't let me... after that I tried to push stock recovery and now i'm stuck at the white HTC Entering Recovery ( pink letters) screen, ( The recovery just doesn't load) ... I just want to finish with this , and go back to my stock htc rom with not roots or anything.. im tired of this seriously.....
When I try to run RUU I get stuck at the Black HTC Letters screen , the the setup stops and says that it will try to repair my phone, sadly with no result every time.. I think that I don't have any OS on my phone right now, because when RUU starts it shows :
Change image version from : ( blank space)
To: ..... bla bla bla , ( the version of the ruu) ...
I have no problems with entering fastboot and unlocking/relocking my Hboot.
Any help about restoringmy phone will be appreciated . Thanks , I'm online all the time so if I get any responses I'll answer quick.
P.S. I can't mount my usb storage from anywhere, and it doesn't show up on my PC when i connect the usb
looperman said:
Hi, everything messed up from using the stupid TWRP 2.6.0.0 .... I was going to flash a custom rom , but it didn........................
P.S. I can't mount my usb storage from anywhere, and it doesn't show up on my PC when i connect the usb
Click to expand...
Click to collapse
Don't lose hope, don't panic.
Tell me which RUU did you use?
Also, what is your CID?
How did you flash your recovery ?
Sent from my HTC One S using Tapatalk 4 Beta
khan.orak said:
Don't lose hope, don't panic.
Tell me which RUU did you use?
Also, what is your CID?
How did you flash your recovery ?
Sent from my HTC One S using Tapatalk 4 Beta
Click to expand...
Click to collapse
well I think that it doesn't really matter which RUU I "used" because it doesn't even get me in the process of installing...
still , tried these two:
RUU_VILLEC2_U_ICS_40_S_HTC_Europe_2.15.401.100_Radio_16.21.20.02U_16.09.20.11_M2_release_286571_signed
RUU_Ville_U_ICS_40_S_HTC_Europe_2.21.401.10_Radio_1.06s.50.02.27_2_10.08.50.04L__release_271119_signed
I flashed all recoveries with ONE S all in one tool kit,
first i was with TWRP 2.5 i think , then i flashed 2.6, and 2.3.3.... now I flashed the stock recovery , still stuck...
looperman said:
well I think that it doesn't really matter which RUU I "used" because it doesn't even get me in the process of installing...
still , tried these two:
RUU_VILLEC2_U_ICS_40_S_HTC_Europe_2.15.401.100_Rad io_16.21.20.02U_16.09.20.11_M2_release_286571_sign ed
RUU_Ville_U_ICS_40_S_HTC_Europe_2.21.401.10_Radio_ 1.06s.50.02.27_2_10.08.50.04L__release_271119_sign ed
I flashed all recoveries with ONE S all in one tool kit,
first i was with TWRP 2.5 i think , then i flashed 2.6, and 2.3.3.... now I flashed the stock recovery , still stuck...
Click to expand...
Click to collapse
If you downloaded RUUs from androidruu, then it's a case of bad RUU.
Sent from my HTC One S using Tapatalk 4 Beta
khan.orak said:
If you downloaded RUUs from androidruu, then it's a case of bad RUU.
Sent from my HTC One S using Tapatalk 4 Beta
Click to expand...
Click to collapse
well what am I supposed to do ?
looperman said:
well I think that it doesn't really matter which RUU I "used" because it doesn't even get me in the process of installing...
still , tried these two:
RUU_VILLEC2_U_ICS_40_S_HTC_Europe_2.15.401.100_Radio_16.21.20.02U_16.09.20.11_M2_release_286571_signed
RUU_Ville_U_ICS_40_S_HTC_Europe_2.21.401.10_Radio_1.06s.50.02.27_2_10.08.50.04L__release_271119_signed
I flashed all recoveries with ONE S all in one tool kit,
first i was with TWRP 2.5 i think , then i flashed 2.6, and 2.3.3.... now I flashed the stock recovery , still stuck...
Click to expand...
Click to collapse
Okay, just now I noticed. You used two Different RUUs for two different versions.
The 1st one is for S3/C2 version, the 2nd one is for S4 version.
Use This Thread to download RUU's only for your version (S4 or S3 whichever you have got). In your case, it does matter which RUU you use.
If you need any help further just ask away.
the thing is that the RUU doesn't get to the process of installing , and I have used those RUU's before....
I need some solution the get to a working recovery and instal some kind of OS because the last time I could get in my recovery it said that I don't have any OS installed...
looperman said:
the thing is that the RUU doesn't get to the process of installing , and I have used those RUU's before....
I need some solution the get to a working recovery and instal some kind of OS because the last time I could get in my recovery it said that I don't have any OS installed...
Click to expand...
Click to collapse
okay you gonna need fastboot for this. What I have been successful with is:
1. Download an RUU (VERSION SPECIFIC!).
2. Go into Bootloader -> Then select FASTBOOT
3. Connect your Phone to PC. It should say Fastboot - USB mode.
4. Run the RUU, it will get you through all the steps.
khan.orak said:
okay you gonna need fastboot for this. What I have been successful with is:
1. Download an RUU (VERSION SPECIFIC!).
2. Go into Bootloader -> Then select FASTBOOT
3. Connect your Phone to PC. It should say Fastboot - USB mode.
4. Run the RUU, it will get you through all the steps.
Click to expand...
Click to collapse
doesn't work as I've told you , it happens with every RUU ... I get the Black screen with white HTC letters...
I think that what RUU does is : it updates the version my software I think it just doesn't place a new software right away( just an update), but as TWRP said I don't have OS installed...
can anyone help me ?
looperman said:
doesn't work as I've told you , it happens with every RUU ... I get the Black screen with white HTC letters...
I think that what RUU does is : it updates the version my software I think it just doesn't place a new software right away( just an update), but as TWRP said I don't have OS installed...
Click to expand...
Click to collapse
Man you're making this difficult. The more I want to help you, the more you become hasty.
RUU doesn't do what you think. It puts New software, updates firmware (hboot, radio, RECOVERY), so yes it is basically a one-stop solution.
Please calm down as panicking won't help.
Tell me your One S version (S3/S4) at least? so that we can move forward in right direction. and also your CID
Tell me what recoveries and RUU you tried. and what errors do you get while you run them.
EDIT: Thanks to @tivofool I forgot to mention that you have to RELOCK your bootloader before running RUU
I'm with S3
I wrote the 2 RUU's I tried to use,
before that i tried TWRP 2.5.0.0,2.3.0.0.,2.6 and finally I flashed factory stock recovery that's it and both my carrier and bl are unlocked
P.S. : Yeah i knew about the relocking but still stuck on black screen with white HTC Letters
looperman said:
I'm with S3
I wrote the 2 RUU's I tried to use,
before that i tried TWRP 2.5.0.0,2.3.0.0.,2.6 and finally I flashed factory stock recovery that's it and both my carrier and bl are unlocked
P.S. : Yeah i knew about the relocking but still stuck on black screen with white HTC Letters
Click to expand...
Click to collapse
Black Screen with HTC is the oem update screen.
Okay do this please and we'll try to see if there's a problem with the HBOOT. Give me this info and We'll reflash HBOOT.
Go to fastboot and connect your phone to PC.
Enter this command from your PC:
Code:
fastboot getvar all
post results here (MINUS IMEI AND SERIAL #)
just a second, I got a working recovery... I mean i can get in it and everything and I can mount the USB Storage too.
What Rom would you recommend ?
looperman said:
just a second, I got a working recovery... I mean i can get in it and everything and I can mount the USB Storage too.
What Rom would you recommend ?
Click to expand...
Click to collapse
That was fast.
I am using Viper ROM and it's very good. Customization and speed.
For a better battery life, BULLETPROOF KERNEL.
Edit: how did you get it to work by the way.
Viper rom is for s4 only isn't it ?
looperman said:
just a second, I got a working recovery... I mean i can get in it and everything and I can mount the USB Storage too.
What Rom would you recommend ?
Click to expand...
Click to collapse
Make sure you flash a S3 Rom (you mentioned having a s3 right?)
Sent from my HTC VLE_U using Tapatalk 2
looperman said:
Viper rom is for s4 only isn't it ?
Click to expand...
Click to collapse
Oh yes sorry.
okay, so ... I'm going to explane everything I did, I hope I'll help some other people too.
I flashed TWRP from One_S_All-In-One_Kit_v4.0 but without luck, then i flash the factory stock recovery, still the phone was letting me into any of these two recoveries, then i decided reflash the same TWRP again and it worked,
First I couldn't mount the storage from the recovery , but it was still showing in "My Computer" , I had only one option and it was to Format the Storage. So I did.. then copied this rom with gapps on it ---> http://forum.xda-developers.com/showthread.php?t=2164406
Fully wiped --> Flash Rom , then Flash Gapps, ---> then I booted in fastboot to boot from CMD the "boot.img" with "fastboot flash boot boot.img" from the Pacman Rom and then I Rebooted the HTC and Done
Huge thanks to @khan.orak
I hope I helped someone with the same ****tyass problem.
looperman said:
okay, so ... I'm going to explane everything I did, I hope I'll help some other people too.
I flashed TWRP from One_S_All-In-One_Kit_v4.0 but without luck, then i flash the factory stock recovery, still the phone was letting me into any of these two recoveries, then i decided reflash the same TWRP again and it worked,
First I couldn't mount the storage from the recovery , but it was still showing in "My Computer" , I had only one option and it was to Format the Storage. So I did.. then copied this rom with gapps on it ---> http://forum.xda-developers.com/showthread.php?t=2164406
Fully wiped --> Flash Rom , then Flash Gapps, ---> then I booted in fastboot to boot from CMD the "boot.img" with "fastboot flash boot boot.img" from the Pacman Rom and then I Rebooted the HTC and Done
Huge thanks to @khan.orak
I hope I helped someone with the same ****tyass problem.
Click to expand...
Click to collapse
Glad it worked for you buddy.
I was running a rom on my phone working fine until the new update came and I tried to install which sent me to my recovery page (TWRP v2.5) I then factory reset hoping this would work and managed to delete my recoveries and now whenever i restart my phone i either get the message of no os installed or when i install a rom and it actually works i get stuck in a boot loop. im not sure if it is the rom or not (KickDroidXL v5) any help would be appreciated, Thankyou
Your problem is your recovery version, TWRP 2.5 is very buggy and has major issues with wiping and with flashing. Download TWRP 2.6 from here. Put the file in your fastboot folder. Connect phone in fastboot mode, open command prompt from within fastboot folder, issue the following commands:
Code:
fastboot flash recovery "filename.img"
(the exact filename, minus the talking marks)
Code:
fastboot erase cache
Code:
fastboot reboot-bootloader
Now you can flash the ROM again and you should be fine.
Sent from my Evita
thanks for that, successfully running twrp 2.6 however when i attempt to install my rom it loaded into recovery as if i chose it from the bootloader screen. when i skipped that one and tried another it got to the htc screen then turned off
thanks again, its now working after looking at your q&a thread! was stuck on the boot loop without the boot.img file, too easy
Guested said:
thanks for that, successfully running twrp 2.6 however when i attempt to install my rom it loaded into recovery as if i chose it from the bootloader screen. when i skipped that one and tried another it got to the htc screen then turned off
thanks again, its now working after looking at your q&a thread! was stuck on the boot loop without the boot.img file, too easy
Click to expand...
Click to collapse
Yeah, you should get s-off either here or here. Then you won't have to worry about flashing the boot.img anymore. You're gonna need s-off to upgrade your firmware anyway, otherwise you're gonna suffer signal losses and random reboots.
so trying to use s-off at the moment and i am not able to boot into recovery (just goes to htc startup screen and phone turns on) i then tried usb debugging where i got the response, needs to be formatted, tried that and said it was impossible as i didnt have any permissions! any ideas?
Neither of the s-off processes need to boot into recovery, what do by mean by that?
Sent from my Evita
so i tried the rum runner method which got stuck when on test 2 it tells me it must ferment longer, i wait in this process for awhile and it attempts to start my phone however it doesnt start up only a black screen with no led (i assume the phone is off) the only way to start is by holding down the power and waiting for the 15 flashes from the buttons then putting it into bootloader, from there i chose recovery and it starts normally without entering the twrp screen.
Test 2: Booting device
Waiting for ADB (19/120)
must ferment longer...
must sanitize, skunky rum is nasty
hold please..............................................
[TTTT********************************************************]
Press ENTER to exit
Do you have SuperCID? If so you could try the Facepalm method instead.
Sent from my Evita
timmaaa said:
Do you have SuperCID? If so you could try the Facepalm method instead.
Sent from my Evita
Click to expand...
Click to collapse
no CID, i tried using http://androidforums.com/sensation-4g-all-things-root/636482-guide-how-supercid.html
didnt work came up with an error of too many links after getting to this stage -change CID
fastboot oem writecid 11111111 (eight ones)
okay so i assume it has something to do with the rom, i flashed twrp 2.6 back and recovery works fine! any suggestions on a battery low and stable rom?
Asking which ROM is best/most stable/fastest/prettiest question isn't allowed so I can't answer that, here's why. To say one ROM is better is to infer that the others are inferior in some way. This is disrespectful to the devs who spend their spare time bringing us these awesome ROMs free of charge. Each user has different tastes anyway, the best way to see which ROM suits you is to flash a few and find out for yourself.
Sent from my Evita
timmaaa said:
Asking which ROM is best/most stable/fastest/prettiest question isn't allowed so I can't answer that, here's why. To say one ROM is better is to infer that the others are inferior in some way. This is disrespectful to the devs who spend their spare time bringing us these awesome ROMs free of charge. Each user has different tastes anyway, the best way to see which ROM suits you is to flash a few and find out for yourself.
Sent from my Evita
Click to expand...
Click to collapse
thanks for that, didnt know! got a new rom running smoother, however rum runner doesnt work and no method to change the CID works? when changing it to 11111111 it gets an error that the device is not connected
Guested said:
thanks for that, didnt know! got a new rom running smoother, however rum runner doesnt work and no method to change the CID works? when changing it to 11111111 it gets an error that the device is not connected
Click to expand...
Click to collapse
You need to get adb/fastboot and your drivers sorted out. Try using an app called pdanet+ from the Play Store, you download it to your phone and then another component on your PC. When you open the PC component it'll install drivers, it's what got everything working for me.
Sent from my Evita
Hey guys,
Tonight I went to install cleanrom on my Verizon HTC One M8. I made a nandroid backup as I always do before flashing a new ROM and then proceeded to flash the new ROM. That went great but then I did something I wouldn't normally do I wiped my data just because I wanted a fresh start and all of my important stuff was backed up online. But when I went to boot I'm stuck on the HTC logo. I have an OTG cable so I proceeded to put the ROM on a flash drive and flash it. Same problem. So I put my old ROM ViperOne 2.4 on the flash drive and flashed it. Now I instantly boot into fastboot. This all seems really strange to me but I'm sure its caused by me stupidly formatting data. I need a bigger flash drive to install the original nandroid backup I found online so I will get one today and post my results. I'm almost positive that will fix my problem but I know there might be an HTC guru out there that knows exactly what my problem is and it may be more then what I'm thinking. Sorry this is scattered ive been messing with my phone all night and kinda tired now. Any help is greatly appreciated and thank you in advance for taking time to help me with this issue. And if I missed anything let me know and I will be sure to post it.
Edit
Sorry I completely forgot to add that I put my nandroid backup on my flash drive but when I went to use it it did not work. I believe this is because I did not have a big enough flash drive so it did not completely back up. LOL! Tonight was not my night.
radiowavedev said:
Hey guys,
Tonight I went to install cleanrom on my Verizon HTC One M8. I made a nandroid backup as I always do before flashing a new ROM and then proceeded to flash the new ROM. That went great but then I did something I wouldn't normally do I wiped my data just because I wanted a fresh start and all of my important stuff was backed up online. But when I went to boot I'm stuck on the HTC logo. I have an OTG cable so I proceeded to put the ROM on a flash drive and flash it. Same problem. So I put my old ROM ViperOne 2.4 on the flash drive and flashed it. Now I instantly boot into fastboot. This all seems really strange to me but I'm sure its caused by me stupidly formatting data. I need a bigger flash drive to install the original nandroid backup I found online so I will get one today and post my results. I'm almost positive that will fix my problem but I know there might be an HTC guru out there that knows exactly what my problem is and it may be more then what I'm thinking. Sorry this is scattered ive been messing with my phone all night and kinda tired now. Any help is greatly appreciated and thank you in advance for taking time to help me with this issue. And if I missed anything let me know and I will be sure to post it.
Click to expand...
Click to collapse
Did you flash newest "firmware" as well? The 2.xx.xxx.x ROM's need newest firmware to boot correctly. (Radio, hboot). Old hboot would cause it to hang at boot.
When I flash ROMs in TWRP I go into advanced and check data, dalvik cache, system, and data every time, never had an issue.
andybones said:
When I flash ROMs in TWRP I go into advanced and check data, dalvik cache, system, and data every time, never had an issue.
Click to expand...
Click to collapse
+1
andybones said:
When I flash ROMs in TWRP I go into advanced and check data, dalvik cache, system, and data every time, never had an issue.
Click to expand...
Click to collapse
That is why this was so strange to me. The hboot firmware sounds promising though.
bigblueshock said:
Did you flash newest "firmware" as well? The 2.xx.xxx.x ROM's need newest firmware to boot correctly. (Radio, hboot). Old hboot would cause it to hang at boot.
Click to expand...
Click to collapse
Thank you for the response. I never even knew it was necessary to flash hboot. I've flashed a couple of ROMs before and never flashed hboot. I will try this tonight. Is this just as simple as flashing a zip? And I pick the newest available version?
radiowavedev said:
Thank you for the response. I never even knew it was necessary to flash hboot. I've flashed a couple of ROMs before and never flashed hboot. I will try this tonight. Is this just as simple as flashing a zip? And I pick the newest available version?
Click to expand...
Click to collapse
not just hboot my friend.
the whole firmware.
if you were to take the OTA you would get this firmware installed.
since we are S-OFF and we don't want to take the OTA, as it's MUCH easier to just fastboot the firmware.zip once someone takes the OTA and pulls all the needed files..
here is the thread you want - here
here is a direct copy and paste from the thread full credit to the OP
"4.4.3 DOWNLOADS BELOW no boot or recovery included in this (what this means is that you won't have to re-flash a custom recovery after the firmware, they removed it to make things easier on us.)
https://www.androidfilehost.com/?fid=23622183712470028
CREDIT TO dottat as he posted it 1st so no need for me too well just use his. Be sure to thank him if you see if around.
Flash via fastboot or Sd card method. Flash at your own risk.
directions for flashing firmware via fastboot an radios below.
Place the zip in your fastboot/adb directory on your computer.
Put the device in fastboot mode
(Volume down and power until menu appears, select fastboot using power button)
Connect the device to the computer
Enter the following commands from terminal/command prompt in the fastboot directory, one at a time:
fastboot oem rebootRUU (this puts the device in RUU mode)
fastboot flash zip firmware.zip (rename file to firmware.zip)
It will say that the update did not finish, to flush again, so repeat the above step:
fastboot flash zip firmware.zip
Then fastboot reboot-bootloader��
FYI on my m8 i did not need to be reflushed on 1.55 but on the new update it did.
credit for these directions also come from santod "
andybones said:
not just hboot my friend.
the whole firmware.
if you were to take the OTA you would get this firmware installed.
since we are S-OFF and we don't want to take the OTA, as it's MUCH easier to just fastboot the firmware.zip once someone takes the OTA and pulls all the needed files..
here is the thread you want - here
here is a direct copy and paste from the thread full credit to the OP
"4.4.3 DOWNLOADS BELOW no boot or recovery included in this (what this means is that you won't have to re-flash a custom recovery after the firmware, they removed it to make things easier on us.)
https://www.androidfilehost.com/?fid=23622183712470028
CREDIT TO dottat as he posted it 1st so no need for me too well just use his. Be sure to thank him if you see if around.
Flash via fastboot or Sd card method. Flash at your own risk.
directions for flashing firmware via fastboot an radios below.
Place the zip in your fastboot/adb directory on your computer.
Put the device in fastboot mode
(Volume down and power until menu appears, select fastboot using power button)
Connect the device to the computer
Enter the following commands from terminal/command prompt in the fastboot directory, one at a time:
fastboot oem rebootRUU (this puts the device in RUU mode)
fastboot flash zip firmware.zip (rename file to firmware.zip)
It will say that the update did not finish, to flush again, so repeat the above step:
fastboot flash zip firmware.zip
Then fastboot reboot-bootloader��
FYI on my m8 i did not need to be reflushed on 1.55 but on the new update it did.
credit for these directions also come from santod "
Click to expand...
Click to collapse
Thank you for all of the useful information I will give this a shot tonight.
radiowavedev said:
Thank you for all of the useful information I will give this a shot tonight.
Click to expand...
Click to collapse
Quite welcome, be sure to go into the thread I posted and thank them, it's all their words, I simply copy and pasted it for you.
andybones said:
Quite welcome, be sure to go into the thread I posted and thank them, it's all their words, I simply copy and pasted it for you.
Click to expand...
Click to collapse
Yeah I'm quite used to the ways of XDA but honestly had no idea about hboot. And I definitely will be thanking them. I'm now home and will test it out. I'll post my results afterwards.
andybones said:
Quite welcome, be sure to go into the thread I posted and thank them, it's all their words, I simply copy and pasted it for you.
Click to expand...
Click to collapse
Okay so I downloaded m8.443.firmware.zip does this have to be flashed via fastboot? And once I flash it should I flash my custom rom cleanrom 2.0 rc and that should be it for my issue?
radiowavedev said:
Okay so I downloaded m8.443.firmware.zip does this have to be flashed via fastboot? And once I flash it should I flash my custom rom cleanrom 2.0 rc and that should be it for my issue?
Click to expand...
Click to collapse
well in bootloader/fastboot yes.. but you DO NOT run the fastboot command..
this is exactly what you do
1) the file you downloaded, m8.443.firmware.zip - rename this to firmware.zip
2) adb reboot bootloader (or however you get there)
3) fastboot oem rebootRUU - this is the important part you will be brought to a black screen with a gray HTC logo IIRC, run the next command - the green bar may stop 3/4 of the way this is because you when you run the last command it will finish it.
4) fastboot flash zip firmware.zip
5) fastboot reboot-bootloader
Im sorry this might be stupid but what do you mean by not running fastboot command? And you say reboot-bootloader shouldn't I do reboot-recovery and flash my custom rom after factory resetting of course. Sorry im just trying to make sure im thorough. I would think messing up hboot would permanently brick my phone.
andybones said:
well in bootloader/fastboot yes.. but you DO NOT run the fastboot command..
this is exactly what you do
1) the file you downloaded, m8.443.firmware.zip - rename this to firmware.zip
2) adb reboot bootloader (or however you get there)
3) fastboot oem rebootRUU - this is the important part you will be brought to a black screen with a gray HTC logo IIRC, run the next command - the green bar may stop 3/4 of the way this is because you when you run the last command it will finish it.
4) fastboot flash zip firmware.zip
5) fastboot reboot-bootloader
Click to expand...
Click to collapse
Would it just be easier to use a nandroid backup?
I figure in the meantime ill fill you in on everything I know about my phone. I was previously running the newest version of ViperOne which was 2.5.0 This problem came up after flashing cleanrom 2.0 RC. I am S-off and unlocked of course and I am running CWM-based Recovery v6.0.4.8 and my hboot stats are as follows:
***UNLOCKED***
M8_WLV PVT SHIP S-OFF
CID-VZW__001
HBOOT-3.16.0.0000
RADIO-0.89.20.0321
OpenDSP-v38.2.2-00542-M8974.0311
OS-1.55.605.2
eMMC-boot 2048MB
I have searched the forums looking for anything related to my issue and cant seem to come up with anything. I have come across a few people with the same issues as me but there questions go unanswered which makes me very nervous... I do believe it is related to my hboot firmware but I cant seem to find a thorough explanation of hboot. Sorry I am a former Motorola guy. This HTC stuff is really mixing it up for me. LOL!
I really appreciate all of the help you have given me and am grateful that you are hanging in with my HTC stupidity and phobia of bricking this 700 dollar piece of aluminum and magnesium.
radiowavedev said:
I figure in the meantime ill fill you in on everything I know about my phone. I was previously running the newest version of ViperOne which was 2.5.0 This problem came up after flashing cleanrom 2.0 RC. I am S-off and unlocked of course and I am running CWM-based Recovery v6.0.4.8 and my hboot stats are as follows:
***UNLOCKED***
M8_WLV PVT SHIP S-OFF
CID-VZW__001
HBOOT-3.16.0.0000
RADIO-0.89.20.0321
OpenDSP-v38.2.2-00542-M8974.0311
OS-1.55.605.2
eMMC-boot 2048MB
I have searched the forums looking for anything related to my issue and cant seem to come up with anything. I have come across a few people with the same issues as me but there questions go unanswered which makes me very nervous... I do believe it is related to my hboot firmware but I cant seem to find a thorough explanation of hboot. Sorry I am a former Motorola guy. This HTC stuff is really mixing it up for me. LOL!
I really appreciate all of the help you have given me and am grateful that you are hanging in with my HTC stupidity and phobia of bricking this 700 dollar piece of aluminum and magnesium.
Click to expand...
Click to collapse
Separate the terminology "ROM" and "Firmware" for a moment. Firmware should/will never change regardless of what ROM's you flash. Think of firmware as a computers BIOS, And ROM as your computers operating system.
First, turn your phone off. Second, hold volume down + power button and do NOT let go of volume down until you're in the boot loader screen. Step 3) switch the boot loader into fast boot within that screen(Fast boot or fast boot USB may come up by default it will be highlighted in red). If you're plugged up to your computer via USB, it should automatically say "Fastboot USB". Then you can execute the commands in the command prompt andybones was talking about.
Did i loose you anywhere?
You could just nandroid back to your previous ROM... but that defeats the purpose. You'll never be able to go to a newer Sense ROM without the firmware upgrade anyway. You might as well get it done because it may improve your network signal, boot times, etc. Usually only benefits you,
After you upgrade firmware, it will say hboot 3.18.0000, Radio: 1.09.20.0702,
radiowavedev said:
Would it just be easier to use a nandroid backup?
Click to expand...
Click to collapse
I didn't just waste my time to write you up a STEP BY STEP FOOL proof guide.
I am not doing this for my benefit...
You made a thread.
You asked for help.
I gave detailed, if you mess up you didn't follow them exactly..
Why would you have me give you exact directions to fix your phone, then ask about a nandroid?
NO. If it were that simple my friend, don't you think I would have let you known this?
I'm sorry if this comes off rude, but I went out of my way to give you exact detailed instructions and you blow them off.
Why make a thread and then not take the advice from a Recognized Contributor to this site!?
I hope you can understand how frustrating this is.
I don't do this because it's fun for me to help get your phone fixed, I do it because you asked for help, and I like to help, but when my help goes un-heard and blown off - I walk away. - Best of luck my friend.
I am still going to help because that's the kind of guy I am..
Run the RUU since you are S-OFF if nothing else works.
You are a SOFT-brick. Very easy to fix.
Andybones, I totally understand. I wasnt trying to be rude im just confused and trying to come up with ideas. I understand it was dumb to mention the nandroid now. I hope you can accept my sincerest apology. I appreciate everything you have done for me and understand if you dont want to help me any longer. Like I said it was not my intention to be rude but I see how it can look like that. I just dont know what im doing.
Hi there, I believe I may have been in the same position as you at some point. What actually is happening is that you are trying to flash a new ROM (4.4.3 I believe) with the old hboot. The ROM should still boot but it will take up to 20min.
How to fix this:
1. Boot into boot loader, (manually or adb)
2. Choose fastboot
3. Connect to USB
4. Open command prompt
5. Fastboot devices
6. fastboot oem rebootRUU
7. You should see a black screen with a dark HTC logo.
8. fastboot flash zip (nameofzip).zip
9. When it finishes type fastboot reboot-bootloader (hyphen required)
10. You just flashed the new firmware but it has no os. You now need to flash a ROM or restore a nandroid backup.
Sent from my HTC One M8 GPE converted using XDA Premium mobile app