Related
Currently running MIUI 1.99 with Matr1x #5 kernel. Looking to flash a new ROM and/or kernel as it's been awhile. There's so many of each that I don't know where to start. My main priorities are stability and speed.
The only other ROM I've used is Cyanogenmod but I had a lot of issues with random reboots. Have these issues gotten better?
Any ROM suggestions? Thanks
Rooted stock with Matr1x. I recently switched back after months on CM7 doing the nightly flash routine. Don't miss it a single bit.
Sent from my Nexus S 4G using Tapatalk
I don't even remember what the stock rom is like. I got cyanogen almost inmediately after getting my phone. Perhaps I'll try stock... what's the best way to go about doing this? Do i need to unroot my phone?
mokflurry said:
I don't even remember what the stock rom is like. I got cyanogen almost inmediately after getting my phone. Perhaps I'll try stock... what's the best way to go about doing this? Do i need to unroot my phone?
Click to expand...
Click to collapse
backup apps with titanium backup + factory reset (wipe data/cache/dalvik) + flash stock rom.
here you can find a great collection http://forum.xda-developers.com/showthread.php?t=1063664
you DO loose root by flashing a stock rom, but you just have to re-flash superuser (and maybe cwm if needed). I find the stock gingerbread rom very fast and reliable.
Plus, you'll receive the ICS ota when it's ready
(but you'll need to flash the stock recovery)
Wait another 2-3 weeks and flash ice cream sandwich.
Sent from my Nexus S 4G
Flash deck 1.3. Really fast stable and great battery life. Its just like stock rom with a few extra tweaks. Has some of cm7 mods without the bloat. Has toggle switches on the drop down and some status bar tweaks but very stable and like I said its close to stock. Running it with matrix 9.0. Give it try.
Sent from my Nexus S 4G using xda premium
hugo87 said:
Flash deck 1.3. Really fast stable and great battery life. Its just like stock rom with a few extra tweaks. Has some of cm7 mods without the bloat. Has toggle switches on the drop down and some status bar tweaks but very stable and like I said its close to stock. Running it with matrix 9.0. Give it try.
Sent from my Nexus S 4G using xda premium
Click to expand...
Click to collapse
Where can i find this ROM? Is it there in XDA?
saranyan said:
Where can i find this ROM? Is it there in XDA?
Click to expand...
Click to collapse
Sorry man its in the nexus s 4g dev section but i cant find it on the GSM dev section. You can always try oxygen rom which is very similar to deck which I was running before I flashed deck. Has the same kind of tweaks more or less. Was also a really good rom. http://forum.xda-developers.com/showthread.php?t=1285243
give carbon a shot. it's based on oxygen but gives better performance than any rom i've used since getting this phone
http://rootzwiki.com/showthread.php?3945-ROM-Carbon-v1.0-A-Personal-Mix-AOSP
hugo87 said:
Flash deck 1.3. Really fast stable and great battery life. Its just like stock rom with a few extra tweaks. Has some of cm7 mods without the bloat. Has toggle switches on the drop down and some status bar tweaks but very stable and like I said its close to stock. Running it with matrix 9.0. Give it try.
Sent from my Nexus S 4G using xda premium
Click to expand...
Click to collapse
Decks is a CM7 kang with stock launcher, renamed cyanogenmod settings, and some additional files removed.
Sent from my Xoom using xda premium
Nexus mv paired with franco kernel
Sent from my GT-P7510 using xda premium
I'd suggest NSCollab and a trinity kernel. This combo worked well for me but I caught the flashing bug since getting this Nexus S and now I'm off to try Nexus MV.
you should try superosr rom (AOSP), very fast and include CM settings as well
I've been trying all NS Roms, and I'll prefer NSCollab because,
-Fast and stable (Near 5000 in quadrant)
-Never had a random reboot
-Extremely stable at 1,2GHz
-Probably the best CM7-based ROM
I don't give a opinion about which kernel u need to use, because they are all awesome, for the highest score in Quadrant, use the Trinity TUV kernel.
But I like the Netarchy or Matr1x kernel more because they are more stable in my eyes. I hope this will give you some more information
U can also wait for ICS (IceCream Sandwich), it will be awesome too.
I'd suggest stock rom + stock kernel.
lower quadrant score but higher performance
Oxygen 2.3 with Matr1x
4097 quadrant at 1,3Ghz.
*UPDATE*
Try the Franco.Kernel, tested it, very stable and high performance.
Greets.
Matr1x all the way bud lmao
Hi my skyrocket is currently running 4.0.3 ics leaked rom, and I was wondering if i could flash custom kernel on ics rom, or would I have to stock gingerbread to use custom kernel. I just do not want to get bricked etc. Thank you.
It depends on the ROM, if it's SKY ICS or some other modded Samsung rom, then you pretty much have to stick with stock, or do some research because I don't really know what Kernels are available for it. Maybe someone with more knowledge will chime in...
If it's AOSP based (CM9, AOKP, Chimaira, etc), then the only other option I know of is InstigatorX's kernel, which seems to work quite well. Pick a stable version, since the latest has issues with the camera. The stock kernel for CM9 is also quite good, but the CPU governors added in Instigators are great for saving battery.
http://forum.xda-developers.com/showthread.php?t=1721235
ian619420 said:
Hi my skyrocket is currently running 4.0.3 ics leaked rom, and I was wondering if i could flash custom kernel on ics rom, or would I have to stock gingerbread to use custom kernel. I just do not want to get bricked etc. Thank you.
Click to expand...
Click to collapse
You can flash cymbaline. Don't try to flash instigator's cm9 kernal you aren't using an aosp rom. Cymbaline fits your deal nicely. You'll dig it.
Sent from my part of the problem
boobah204 said:
You can flash cymbaline. Don't try to flash instigator's cm9 kernal you aren't using an aosp rom. Cymbaline fits your deal nicely. You'll dig it.
Sent from my part of the problem
Click to expand...
Click to collapse
second this
boobah204 said:
You can flash cymbaline. Don't try to flash instigator's cm9 kernal you aren't using an aosp rom. Cymbaline fits your deal nicely. You'll dig it.
Sent from my part of the problem
Click to expand...
Click to collapse
That what i use. +1
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
norbarb said:
That what i use. +1
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Click to expand...
Click to collapse
I also use this kernel and in conjunction with System Tuner for OC/UV.
First...
hey, i have latest vipers rom 1.3.5 but fell my phone little laggy and somethimes it freeze and he is working with big lags someone has idea why is that ? my kernel version is 3.0.36 bricked !
Second...
Is it possible to restore my phone like when it was purchased from store, very first android firmware and everything, and if i do that is it gonna work better and is it gonna have better performance
No it wont run better. Have you tried other ROM's?
Beamed from my Senny..
no only ordroid but i am thinking of changing current rom i like HTC sense but i also want to try some other.
is there a chance all this to be becouse of kernel, should i change kernel first
Make a Nandroid backup of your current rom and yes, you could try different kernels, but you could also try different roms. If you like the sense based roms try Elegancia (there are different sense versions) or Android Revolution HD. As far as I know the development of Ordroid is finished so you will not see any update on that but the two other mentioned above are updated and they are really good roms. Try them and as you have the backup of Vipers rom you can always revert back to that.
True give other rom a try. Also try out jelly bean. I'm using paranoid Android by Dragun and it's very fast with newest kernel. I came from viper to paranoid Android and I love it. It's a great rom. Try it out too and see what you think. It's been stable and amazing! Tethering works perfectly with Wi-Fi tether and it's not laggy. I've personally really enjoyed the switch. At first I was worried how stable jelly bean would be but it's proven to be smooth fast and really stable. So while trying out different roms do give this a try I think you will like it.
Sent from my HTC Sensation using xda premium
I installed cm10 by bruce it's very good and smooth but,,, he has performance option in settings and there i can over clock and set frequencies of my cpu.
I was reading about Overclocked Kernel v1.5.2 by SebastianFM and faux kernel that they are realy good and fast. i also want to play 3d games so is it better to keep cm10 stock kernel or instal some of them ???
ivanmadzarov said:
I installed cm10 by bruce it's very good and smooth but,,, he has performance option in settings and there i can over clock and set frequencies of my cpu.
I was reading about Overclocked Kernel v1.5.2 by SebastianFM and faux kernel that they are realy good and fast. i also want to play 3d games so is it better to keep cm10 stock kernel or instal some of them ???
Click to expand...
Click to collapse
sebs and faux kernel are of sense roms ..wont work for aosp/cm9/cm10 roms
keep the stock one imo ..its good enough
ivanmadzarov said:
I installed cm10 by bruce it's very good and smooth but,,, he has performance option in settings and there i can over clock and set frequencies of my cpu.
I was reading about Overclocked Kernel v1.5.2 by SebastianFM and faux kernel that they are realy good and fast. i also want to play 3d games so is it better to keep cm10 stock kernel or instal some of them ???
Click to expand...
Click to collapse
tamcore kernel works with cm10, but you wont get support from the developer.
this kernel has everything
I recently installed a 4.2.1 Rom (currently xylon, but I want to try every of them). Which kernels are compatible?
I used Air Kernel on 4.1.1 and I really loved it, but seems it does not work on 4.2.
thank you
Try marmite it works like a charm on 4.2.1
Sent from my Nexus S using xda app-developers app
Marmite is the only one that works? Cause it has only 3 governors (I remember ondemand smartass and performance). I loved other kernels also because of their variety of governors.
Matr1x works as well.
Sent from my Nexus S 4G using xda app-developers app
Derkernel should do although I haven't tried it yet.
Sent from my Nexus S using xda app-developers app
Thank you!! I'm gonna try matr1x.
flipsk8 said:
Try marmite it works like a charm on 4.2.1
Sent from my Nexus S using xda app-developers app
Click to expand...
Click to collapse
I've tried a marmite kernel and the color of the display turned red-ish/pink-ish...is there a marmite version that keeps the color like the stock kernel?
discovery94 said:
I've tried a marmite kernel and the color of the display turned red-ish/pink-ish...is there a marmite version that keeps the color like the stock kernel?
Click to expand...
Click to collapse
Not sure why Marmite turned redish pinkish on you. It has fixed colors. Try Matr1x. It has stock colors unless you wanna change them.
mdean1981 said:
Not sure why Marmite turned redish pinkish on you. It has fixed colors. Try Matr1x. It has stock colors unless you wanna change them.
Click to expand...
Click to collapse
maybe because there are many different versions of the marmite kernel. So i was wondering if there's one with fixed stock colors.
Does Matr1x work well with 4.2.1 ROMs?
discovery94 said:
maybe because there are many different versions of the marmite kernel. So i was wondering if there's one with fixed stock colors.
Does Matr1x work well with 4.2.1 ROMs?
Click to expand...
Click to collapse
Marmite does not have stock colors. I just said to do Matr1x. It has stock unless you use voodoo to change them.
+1 Matr1x.
Sent from my Nexus S using Tapatalk 2
Air kernel r4 is out and is now compatible on 4.2.1
I mounted it today and seems to be very smooth
I want a stable rom and kernel. The camera should be able to take 8MB pics and capture 1080p video. If possible I want JB or ICS.
please help. I have been seeking for rom and kernel for a long time. The developers does not give understandable specs like openly for me...
0b095 said:
I want a stable rom and kernel. The camera should be able to take 8MB pics and capture 1080p video. If possible I want JB or ICS.
please help. I have been seeking for rom and kernel for a long time. The developers does not give understandable specs like openly for me...
Click to expand...
Click to collapse
official CM 7.2 is my recommendation.
ICS and JB are not fully working and since you want a stable one I'd stay away from those.
Alright then I guess I need to tell like '' the most stable ROM and Kernel among the JB and ICS. Guys please help me! Camera should work 1080p
0b095 said:
Alright then I guess I need to tell like '' the most stable ROM and Kernel among the JB and ICS. Guys please help me! Camera should work 1080p
Click to expand...
Click to collapse
The only way that will work is on Adampk's and Mazout360's CM10.1 Rom Build 7 which is the only rom that has full HWA to make the camera work properly. Downside is that the Radio (Cellular Network) will NOT work. This means no calls, SMS, data, etc. Anything to do with your Mobile Network will not work.
Yuvin said:
The only way that will work is on Adampk's and Mazout360's CM10.1 Rom Build 7 which is the only rom that has full HWA to make the camera work properly. Downside is that the Radio (Cellular Network) will NOT work. This means no calls, SMS, data, etc. Anything to do with your Mobile Network will not work.
Click to expand...
Click to collapse
hmm I tried Adampk's and Mazout360's CM10.1 Rom Build 7. It did not work it gives me Setup Wizard has stopped error always...... (
If you want stable and fast then I highly recommended Singh-ui.
Sent from my LG-P999 using Tapatalk 2
there is no stable ics/jb yet. Stick with GB and use faux kernal
Sent from my LG-P999 using xda app-developers app
Xura08 said:
there is no stable ics/jb yet. Stick with GB and use faux kernal
Sent from my LG-P999 using xda app-developers app
Click to expand...
Click to collapse
for example what do you use ?
I use Hellfire with faux kernal and I haven't had any problems. The ONLY downside is the battery indicator that comes with it, its kind of annoying
Sent from my LG-P999 using xda app-developers app
Xura08 said:
I use Hellfire with faux kernal and I haven't had any problems. The ONLY downside is the battery indicator that comes with it, its kind of annoying
Sent from my LG-P999 using xda app-developers app
Click to expand...
Click to collapse
can it capture 1080p and is it gb 2.3.7 or what ? also I have kamasha 4.1.1 with stock kernel (which comes with the rom) I guess it is cm 9 so I can hopefully use harsh kernel right ?
Xura08 said:
I use Hellfire with faux kernal and I haven't had any problems. The ONLY downside is the battery indicator that comes with it, its kind of annoying
Sent from my LG-P999 using xda app-developers app
Click to expand...
Click to collapse
You're using the faux DS kernel. Use his regular CM one.
Sent from my LG-P999 using xda app-developers app
0b095 said:
can it capture 1080p and is it gb 2.3.7 or what ? also I have kamasha 4.1.1 with stock kernel (which comes with the rom) I guess it is cm 9 so I can hopefully use harsh kernel right ?
Click to expand...
Click to collapse
If you have problems with Faux kernels try Trinitys. I could never get Faux's kernels to play nice with my phone and while they ran smoother the random reboots, black screens and having to keep phone from sleeping just killed it for me.
This was oh stock voltage as well.
Sent from my LG-P999 using xda premium
guys I think the best rom is http://forum.xda-developers.com/showthread.php?t=1420972 that one for me! At least the developer tells the specs of the rom clearly... I just did not understand how to install v6supercharger, it seems hard to do.
I currently have KashaMalaga (jb 4.1.1.) with harsh kernel 1.4 GHZ everything's looking pretty stable except camera ( no 1080p ) well I'll go with that for a while than maybe install above rom and hopefully v6supercharger
I installed Hellfire cm7 GB 2.3.7. with v6 supercharger. All fine but screen sensitivity is really low.
0b095 said:
I installed Hellfire cm7 GB 2.3.7. with v6 supercharger. All fine but screen sensitivity is really low.
Click to expand...
Click to collapse
Might be something to do with v6. Im not running it and everything is fine for me.
Sent from my hellpowered G2X
I'm using CM7.2 stable with Wolfscript and Harsh kernel and my phone is flying! Very stable and very fast (after Wolf script), though battery life has taken a hit after running the script. My next flash will be Mazout360's dual-boot CM10.1 unofficial with a GB ROM as my daily (still haven't decided which - they're all so good! )
Sent from my LG-P999 using xda app-developers app