hello i was trying to put custom rom on my htc one s chip-s3, but its stuuck on htc logo.
the cid is BSTAR301
***unlocked***
VILLEC2 PVT SHIP S-ON RH
HBOOT-2.09.0001
RADIO-16.05.20.24_M
OpenDSP-v05.6.0.2226.00.0418
eMMC-boot
I'm looking for some ruu compatible with my phone please help
mee to, i need that XD
jdsr1986 said:
hello i was trying to put custom rom on my htc one s chip-s3, but its stuuck on htc logo.
the cid is BSTAR301
***unlocked***
VILLEC2 PVT SHIP S-ON RH
HBOOT-2.09.0001
RADIO-16.05.20.24_M
OpenDSP-v05.6.0.2226.00.0418
eMMC-boot
I'm looking for some ruu compatible with my phone please help
Click to expand...
Click to collapse
hey men use the custom rom trickdroid 2.0 (c2).
Link here.
http://trickdroid.org/trickdroid-v2-0-0-c2-29-09/
JavierArends said:
hey men use the custom rom trickdroid 2.0 (c2).
Link here.
http://trickdroid.org/trickdroid-v2-0-0-c2-29-09/
Click to expand...
Click to collapse
Well no ruu for now, but as JavierArends says you can use TrickDroid and BackToBasics Rom. I was having that problem too. No boot, stuck on htc screen. The problems is that ther is no base software 4.0.4+ for that phone. If you want to use your phone againa flash backtobasics, but that rom is Senseless, but works great, if you want Sense you can install TrickDroid this way:
Download trickdroid v2.0.0 , full wipe (user, cache, dalvik) flash Rom, go to bootloader adn flash boot.img and reboot until it works
After that you can download trickdoid v3.0.0 and flash only wiping cache and dalvik
that works for me
Hard Bricked?
plmosqueda said:
Well no ruu for now, but as JavierArends says you can use TrickDroid and BackToBasics Rom. I was having that problem too. No boot, stuck on htc screen. The problems is that ther is no base software 4.0.4+ for that phone. If you want to use your phone againa flash backtobasics, but that rom is Senseless, but works great, if you want Sense you can install TrickDroid this way:
Download trickdroid v2.0.0 , full wipe (user, cache, dalvik) flash Rom, go to bootloader adn flash boot.img and reboot until it works
After that you can download trickdoid v3.0.0 and flash only wiping cache and dalvik
that works for me
Click to expand...
Click to collapse
Hello i have the same problem here.. but my HBOOT is like this
***relocked***
***Security Warning***
VILLEC2 PVT SHIP S-ON RH
HBOOT-2.09.0001
RADIO-16.05.20.24_M
OpenDSP-v05.6.0.2226.00.0418
i got bootloop usin trickdroid 4 so i try to restore a backup using recovery, but the phone got stuck again, so i try to install a RUU but since then i cant enter to recovery, if what your saying can be done, how can i flash it what command prom shut i use to flash trickdroid 2, shut i unzip the file an then flash it whit fastboot, thanks for your help
eMMC-boot
DarkSnakeEater said:
Hello i have the same problem here.. but my HBOOT is like this
***relocked***
***Security Warning***
VILLEC2 PVT SHIP S-ON RH
HBOOT-2.09.0001
RADIO-16.05.20.24_M
OpenDSP-v05.6.0.2226.00.0418
i got bootloop usin trickdroid 4 so i try to restore a backup using recovery, but the phone got stuck again, so i try to install a RUU but since then i cant enter to recovery, if what your saying can be done, how can i flash it what command prom shut i use to flash trickdroid 2, shut i unzip the file an then flash it whit fastboot, thanks for your help
eMMC-boot
Click to expand...
Click to collapse
If you can enter to bootloader you can run a ruu from there. If you the locked the bootloader the ruu has to work fine. In order to install trick droid you have to unlock boot loader , install recovery and gain root access. I think the only thing you have to flash with fast boot is the boot.img
Sent from my Nexus 7 using xda app-developers app
plmosqueda said:
If you can enter to bootloader you can run a ruu from there. If you the locked the bootloader the ruu has to work fine. In order to install trick droid you have to unlock boot loader , install recovery and gain root access. I think the only thing you have to flash with fast boot is the boot.img
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
i flash the boot.img that trickdroid gave me, shut i flash whit original boot from villec2? where can i get it?
so is there a ruu to my phone model?
or shut i try whit trickdkdroid 2.0
im from venezuela to can contact you?
plmosqueda said:
Well no ruu for now, but as JavierArends says you can use TrickDroid and BackToBasics Rom. I was having that problem too. No boot, stuck on htc screen. The problems is that ther is no base software 4.0.4+ for that phone. If you want to use your phone againa flash backtobasics, but that rom is Senseless, but works great, if you want Sense you can install TrickDroid this way:
Download trickdroid v2.0.0 , full wipe (user, cache, dalvik) flash Rom, go to bootloader adn flash boot.img and reboot until it works
After that you can download trickdoid v3.0.0 and flash only wiping cache and dalvik
that works for me
Click to expand...
Click to collapse
do you think that you could install trickdroid v4.0.0 after the v3.0.0? or is there another step needed?
cheers
lihamm said:
do you think that you could install trickdroid v4.0.0 after the v3.0.0? or is there another step needed?
cheers
Click to expand...
Click to collapse
Last time i Tried but gives me some screem resolution problems. Maybe i was doing something bad, I think you can try from a fresh install, maybe works fine. Ill try later but if you try and works fine tell us please
Rom
All you guys can do is go to a differnt Rom for now and way for RRU update to come out for you guys!
I say http://forum.xda-developers.com/showthread.php?t=2000854&page=3 this rom will be good for you guys
if you want to stay update
plmosqueda said:
Last time i Tried but gives me some screem resolution problems. Maybe i was doing something bad, I think you can try from a fresh install, maybe works fine. Ill try later but if you try and works fine tell us please
Click to expand...
Click to collapse
yeah it gives me some messed up pink screen, and my icons are negatives. for now im just running v3.0.0.
such a shame that we have one of the worst phones for custom roms
DrSaV23 said:
All you guys can do is go to a differnt Rom for now and way for RRU update to come out for you guys!
I say http://forum.xda-developers.com/showthread.php?t=2000854&page=3 this rom will be good for you guys
if you want to stay update
Click to expand...
Click to collapse
I have a HTC One S villec s3, and I unlocked it using the official HTCDev method, then I tried to install CWM but I couldn't, then I successfuly installed TWRP, and it worked fine.
I made a backup of the official ROM so good, but after doing factory reset, wiping cache/dalvik I accidentally press power and the phone was powered off. Now when I turn it on I can get into bootloader but I can't enter into TWRP, I tried reinstalling TWRP but I can not get into TWRP, only thing that I see is the logo of TWRP and suddenly restart.
--- Im writting on this thread --- http://forum.xda-developers.com/showthread.php?p=37382834#post37382834
---------- Post added at 02:25 PM ---------- Previous post was at 02:19 PM ----------
DarkSnakeEater said:
i flash the boot.img that trickdroid gave me, shut i flash whit original boot from villec2? where can i get it?
so is there a ruu to my phone model?
or shut i try whit trickdkdroid 2.0
im from venezuela to can contact you?
Click to expand...
Click to collapse
Epale pana! Soy de venezuela tambien... Lograste algo? Por lo menos encontrar una RUU que nos sirva?
i think i found it :
http://www.htcmania.com/showthread.php?t=479693
emin3sku said:
i think i found it :
http://www.htcmania.com/showthread.php?t=479693
Click to expand...
Click to collapse
Hi, I went to that thread, and tried to download the rom, it is in dropbox, but teh account has exceeded the allowed traffic, can someone reupload this file to mega or mediafire?=
RUU for BSTAR301 DONT EXIST. YOU NEED BE S-OFF AND CHANGE YOUR CID FOR ANOTHER LIKE ASIAN CID TO USE THAT RUU
---------- Post added at 10:20 PM ---------- Previous post was at 10:19 PM ----------
yurais said:
OK, maybe
but
is there any way to flash only the hboot to the phone ? because I can not flash stock ROM, am S-ON and I havent found a higher stock rom for this phone CID.
Click to expand...
Click to collapse
my bad.. you are from telcel.. so you have the annoying CID BSTAR301. i found a JB OTA from our CID http://www.shipped-roms.com/downloa...15.20.29_M_release_315588dsq1aqy4avpc8u41.zip but.. i don't know if works.... you can try install some sense based ROM like viper compatible with Moonshine to get S-OFF or you can try install any ROM and try rumrunner to S-OFF. after that you can try fastboot oem overwrite cid HTC__044 or something like that... its HTC Asian CID.. if that not work you can try this
xiaolvmu said:
OK... @JavierG123
I already found an existing tutorial:
http://forum.xda-developers.com/showthread.php?p=26516911
The only difference is, VilleC2 can't use 11111111. You can change it to HTC__044 (Asia Version)
Then, in this download page : http://androidruu.com/?developer=VilleC2
Download this: RUU_VILLEC2_U_ICS_40_S_hTC_Asia_WWE_2.15.707.101_Radio_16.21.20.02U_16.09.20.11_M2_release_289564_signed.exe
Then you can flash the pure RUU
ps: The Hex Editor on Windows is a paid software, so I'll give a cracked version
https://www.dropbox.com/s/ath1t92jrs4lm78/Hex Editor for changing CID.zip?dl=0
Click to expand...
Click to collapse
Well, here is what I have done so far...
Downloaded the Ruu Asia, downloaded the BSTAR OTA and downloaded Viper also...
Flashed Viper rom and Wrote the Viper boot.img file and phone keeps in bootloop.
So, At this time I opened IR'Key software and after reading phone info I could notice teh CID was changed itself from BSTAR to HTC__01, awesome, I would no believe it. SO I used teh sane software and edited the CID to be the ASIAN one, and it CHANGED !!
great
I then tried to flash the Stock Asian RUU, first I relocked the BOOT.
The RUU started to work and gave an error complaining the MODEL is not compatible
Now I cant enter recovery, and cant unlock bootloader vbecause the unlockFile doesnt work (I think I have to go through all the way to the bootloader unlock process to install the recovery again)
The question is, do I have to also edit the Model ID ? and what is the correct model ID for the ASIAN RUU to be compatible ?
Related
First post. Hi all. I have rooted phones for years now and am finally at a loss of what to do with this current phone I have. I have a HTC sensation. I just S-offed it and was trying to install clolckwork mod 5.0.0.8 and it says model id incorrect and I am stuck in a boot loop. I must have downloaded 15 different PG58IMG files and they all say the same thing..... model id incorrect. I just got this phone in the mail. Revolutionary S-offed it. Then when it asked "Revolutionary will now ask you to Install clockwork recovery mod after S OFF. Type N and install it manually" from the [Guide] to Installing S-off, Unlocking, ClockWork, Root, SuperCID & S-on. Now I am stuck in a boot loop. Does anyone have any idea of how to get this phone working again??
Revolutionary
PYRAMID PVT SHIP S-OFF RL
HBOOT-1.27.1100
RADIO-10.14.9035.01_M
eMMC-BOOT
Jan 13 2012.17:33:34
I have successfully rooted a HTC sensation before. My phone got stolen out of my work truck and this is the replacement phone I just got yesterday and was going to do go through all the stuff to install android revolution HD on it. and right after s-off it boot looped. Next step was to install clockwork mod and thats where im stuck. I have no recovery installed because that was the next step. Any insight/help appreciated thanks
If you a have sd card adapter, you can download CWM Recovery form Here rename it PG58IMG and put on the root of sd card.
Put your sd card back into the phone and reboot in bootloader and it will install recovery. When you are done, delete or rename PG58IMG from sd card.
Btw what is your model Id?
Download terminal emulator from the market and detect it by typing "getprop ro.mid" (without quotes).
Inside the PG58IMG there is a text file with MID and CIDs which you could eventually edit in case of mismatch.
Hope it helps!
Also, instead of CWM you could try installing 4ext
Sent from my HTC Sensation using XDA
Ok I will try that. I looked under battery on my phone it say PG58100. SInce I cant get into my phone because of the boot loop I cannot download that program you mentioned. So should I open the android-info.txt in the PG58IMG and change
modelid: PG5813000
to
modelid: PG5810000
????
and then try the update?
lackdog said:
Ok I will try that. I looked under battery on my phone it say PG58100. SInce I cant get into my phone because of the boot loop I cannot download that program you mentioned. So should I open the android-info.txt in the PG58IMG and change
modelid: PG5813000
to
modelid: PG5810000
????
and then try the update?
Click to expand...
Click to collapse
I would try and see if it goes
Btw I see that your firmware is a ICS. Are you sure you downloaded the right firmware for your CID?
Read here very carefully
lackdog said:
Ok I will try that. I looked under battery on my phone it say PG58100. SInce I cant get into my phone because of the boot loop I cannot download that program you mentioned. So should I open the android-info.txt in the PG58IMG and change
modelid: PG5813000
to
modelid: PG5810000
????
and then try the update?
Click to expand...
Click to collapse
If you have adv setup and can boot to bootloader
you can try installing 4ext recovery using fastboot commands.....here is link for touch recovery image
http://forum.xda-developers.com/showthread.php?t=1377759
Command
Fastboot flash recovery recovery.img
from my HTC Sensation XE with Beats Audio using XDA
Just wondering if you flashed a wrong PG58IMG (ICS firmware instead of recovery).
You are on ICS firmware now but your rom is a GB I guess. This can be the reason of boot loop.
If this is the case read carefully and download the right PG58IMG (firmware 1.17 if your rom is a Gingerbread) from here.
Unfortunately all the bootloader flashable zips are named PG58IMG, but their content is different.
Heres what I did. Took phone out of the box. turned it on. used it for a couple minutes. Then I did the whole revolutionary s-off process. Then I did this
-----------------------------------------------
STEP 2. To INSTALL Recovery - v5.0.0.8
1. Download recovery v5.0.0.8 for the Sensation HERE: or Multiupload
2. Copy the PG58IMG file into the Root folder of your SD card (The main Folder of your Memory Card)
3. Turn off your phone FUlly and reboot into the Bootloader/HBOOT screen (see post above on how to get to hboot screen)
4. Press Volume up to Accept when it asks" Do you want to start the update"
5. Press Power Off to Reboot back to android after installation is successful (normal screen with homescreen)
6. Delete PG58IMG from your memory card and you can now root using step 3 below or install a custom ROM using CWM (Customs Roms are already rooted)
--------------------------------------------------
I downloaded the older 5.0.0.8 because it worked for me in the past when I rooted my old HTC sensation.
Now its saying no image even though I renamed it to PG58IMG.zip
And it still stuck on a loop. SO alls I did so far was s-off a brand new phone.
Thank you all. Phone is back to normal. I did the 1.17 firmware that kualmente mentioned. So now my phone is a stock phone but just S-off'd. The next step is to install a recovery. Do i even have to install clockwork mod or can I just put on 4EXT recovery? if so how. I was just following directions from this thread.
http://forum.xda-developers.com/showthread.php?t=1192300
And step two says to install clockwork mod so thats what I was going to do. but I know i need 4EXT later anyway to install android revolution
I personally prefer 4ext touch recovery but basically both cwm and 4ext have same functions.
There is a nice tool to easily install 4ext recovery touch HERE
I'm all back up and running android revolution 6.5.5
Thanks for all your quick responses.
uys a question my htc xe is stuck in a loop.. keeps rebooting to htc screen everytime and restarts.
Here are my details
PYRAMID PVT SHIP S-ON RL
HBOOT-1.27.0000
eMMC-boot
i unlocked the bootloader with htcdev.
i flashed the boot.img via fastboot from PC and tried to fix the wifi error.
This was the link i went http://forum.xda-developers.com/show...1469428&page=2
Thanks a million for all the help.
What ROM are you trying to boot ?
If it is an ICS ROM you must have 3.32 firmware
azzledazzle said:
What ROM are you trying to boot ?
If it is an ICS ROM you must have 3.32 firmware
Click to expand...
Click to collapse
sorry i am still new at this.. let me explain everything from the start..i used htc dev to unlock the bootloader.. managed to root it..and i managed to flash Virtuous Inquisition ICS.. there was a wifi problem so i tried to flash the boot.img from the link in my first post.. and there the problem occurred..after i restarted.. it just kept restarting and restarting. I have no idea what to do now. T_T
Boot into Bootloader (volume down + power) and tell me what numbers are next to HBOOT
Also, when flashing virtuous ROM, Did you flash 3.32 firmware ???
azzledazzle said:
Boot into Bootloader (volume down + power) and tell me what numbers are next to HBOOT
Also, when flashing virtuous ROM, Did you flash 3.32 firmware ???
Click to expand...
Click to collapse
Hboot 1.27.0000
No i didnt flash the 3.32 firmware...
You flashed the firmware (otherwise you wouldn't have hboot 1.27).
Most probably you did'nt flash the rom and you are still on GB. This is why it bootloops.
Did you install a custom recovery (cwm or 4ext)? If not do it and then flash the rom from recovery
kualmente said:
You flashed the firmware (otherwise you wouldn't have hboot 1.27).
Most probably you did'nt flash the rom and you are still on GB. This is why it bootloops.
Did you install a custom recovery (cwm or 4ext)? If not do it and then flash the rom from recovery
Click to expand...
Click to collapse
I was on official ICS on my HTC XE before i went to root and install custom rom.
hmm i have cwm.. i ran the recovery but it still gave me the bootloop..
Qiwei said:
I was on official ICS on my HTC XE before i went to root and install custom rom.
hmm i have cwm.. i ran the recovery but it still gave me the bootloop..
Click to expand...
Click to collapse
I didn't know that sensations are already shipped with ICS. By the way are you still s-on or you s-off and root?
guys thanks its ok already i managed to get back to my custom rom! Thanks alot for all the help and fast response!! A million thanks to everyone of you!!
---------- Post added at 05:28 AM ---------- Previous post was at 05:26 AM ----------
kualmente said:
I didn't know that sensations are already shipped with ICS. By the way are you still s-on or you s-off and root?
Click to expand...
Click to collapse
hmm no it wasnt shipped with ICS. I updated it OTA for the official update. I am on S-on with root.. i unlocked my bootloader with htcdev
Ok so i had an ICS rom running on my sensation and then i saw the virtuous incision rom and i wanted it. so i updated to 3.32 and i wiped data, dalvic,and cache and then flashed the rom but it just keeps looping. I can't flash any other rom either because it does the same thing. And i do have supercid. Please help!! (
Are you soff?
If not and you are htcdev unlocked
Then you need to extract boot.img from the rom zip file (usually in kernels folder)
Then you need to flash the boot.img via fastboot
Command
fastboot flash boot boot.img
sent from my blazing fast pyramid through sonic waves
I am soff. what can i do?
josheluno said:
I am soff. what can i do?
Click to expand...
Click to collapse
So there's no problem... When you said you had ics rom you might have 3.32 firmware.. Why update it again? Any ways what's your hboot saying now? post all the stuff in hboot..
Also I recommend you to do a factory reset / wipe all partitions except sd card... From the custom recovery you have and flash the rom again... If you are on 3.32 then you should not have any problem
sent from my blazing fast pyramid through sonic waves
reply
It says
-Revolutionary-
PYRAMID PVT SHIP S-OFF RL
HBOOT- 1. 27. 1100
Radio- 11.22. 3504_7M
OpenADSP-v02.6.0.2226.00.0131
eMMC-boot
and i updated because i thought i needed to for the new rom, i see now I'm an idiot Dx
also
I tried flashing the rom again after wiping like you said, and i just got to boot loop again D:
Then the only reason Is firmware is not properly flashed... Get the 3.32 firmware from this thread and flash it again...
http://forum.xda-developers.com/showthread.php?t=1412618
Then flash the rom again on top of it.. Also this time do a factory reset/format
sent from my blazing fast pyramid through sonic waves
what it said
when i tried to update again it would say parsing and then it wouldn't start the update with the latest file of the link you sent me
nvm i just needed to use my windows computer for it my mac kept unzipping it
josheluno said:
when i tried to update again it would say parsing and then it wouldn't start the update with the latest file of the link you sent me
Click to expand...
Click to collapse
Make sure the name is fine.. It should be PG58IMG if you are using windows..And keep it on top of sdcard..
Then hboot should automatically find the update (try this couple of times)
If it still doesn't work. Get 3.24 firmware from the same link and flash it and see
Btw you are supercid right? Also the hboot you posted earlier is fine.
sent from my blazing fast pyramid through sonic waves
reply
i flashed it, and i am supercid, now I'm waiting to see if itl work
it just goes back to the boot loop
What did i do wrong?
It continues to boot loop after everything
josheluno said:
It continues to boot loop after everything
Click to expand...
Click to collapse
Do one thing right now you got virtuous rom right.
Try to do a restore from backup... From your custom recovery.. I assume you have Nand backup..
And see that solves the problem
Otherwise
2. Extract the boot.img from the rom you've flashed.. (it will be in kernel folder inside the zip file) Then flash the boot.img via fastboot.. Keep the boot.img in your adb folder and Type this
"fastboot flash boot boot.img"
3rd chance
3.flash 3.24 firmware from the thread ive linked.. And flash the rom again.
Final chance
Get the ICS RUU of Europe one (get this from pyramid shipped rom collections) thread GOOGLE it) and run the RUU.. With you phone connected to your device in fastboot
This will restore you to stock ics... After this you'll have to flash recovery and all again
sent from my blazing fast pyramid through sonic waves
No luck
I have tried everything, and it just goes back to the same boot loop : (
josheluno said:
I have tried everything, and it just goes back to the same boot loop : (
Click to expand...
Click to collapse
what about the final chance one ???
is RUU run from pc is completed and exited normally ?
Where do you get the ruu??
ganeshp said:
what about the final chance one ???
is RUU run from pc is completed and exited normally ?
Click to expand...
Click to collapse
where do you get the ruu??
josheluno said:
where do you get the ruu??
Click to expand...
Click to collapse
I'm having the same problem as you but with S-ON
I downloaded the RUU from here
http://forum.xda-developers.com/showthread.php?t=1074559
I think you will have to re-lock before install. Not sure.
I run into errors, but I hope this works for you
Are u still looping pm me
Sent from my Sensation using xda premium
So basically i want to start "tuning" my Htc SENSATION XE, and i was looking around to install a cool ROM and i found that Revolutionary 6.7.0 with beats audio.
I was reading all the steps in order to successfully install the ROM.
Ofc my phone is alrdy S-OFF with supercid, but KEEP IN MIND IT WAS NOT ENG H-BOOT.
So i've rooted my phone, rebooted and all went smooth.. than i saw i was in need to update the RADIO.img, in order to do that i need the ENG-H BOOT. (HERE COMES THE PROBLEM)
I've flashed the ENG - HBOOT but when i reboot my phone it won't work, it just keep booting and stuck in beatsaudio logo, than reboot again and again.
So i've tried to restore by using a backup that i've done. Also i've deleted the PG58xxx.img and installed 3.3 firmware, nothing to do still not working, still bootloading and restart.
PLS Any help?
Thats what i see in Fastboot mode
PYRAMID PVT ENG S-OFF RL
HBOOT - 1.17.2008 (PG5813001)
RADIO-11.24A. 3504.31_M
eMMC-boot
May 13 2011, 21:04:03
UPDATE: Tried also to install InsterCoin ROM, and nothing work.
Seems it is a boot problem, its like it wont boot the system and keep rebooting over and over...
I'm not 100 percent sure but your hboot doesn't seem right it should be 1.27. Try flashing the unlock version of 3.32 or 3.33 and try installing a rom.
Sent from my Sensation using xda app-developers app
The hboot you flashed is Completely wrong one
To have correct one.. Flash the 3.32 universal Firmware Then 3.33 firmware
Or alternatively you can flash the jb hboot
For jb hboot go here
http://unlimited.io/hboot-downloads/
Get the pyramid ics one.. From there
And flash it the following way
Connect the phone in bootloader to pc.
Copy the downloaded file to the adb/fastboot folder of your pc.
.. Open a command windows from your adb/fastboot folder
Then type these commands one by one
fastboot erase cache (if failed ignore it)
fastboot oem rebootRUU (black screen with silver htc)
fastboot flash zip jb_hboot.zip (if failed here.. Let me know)
fastboot reboot
Sent from my pyramid.. Through blazing fast sonic waves
Guys (i don't believe in god xD) so someone good BLESS YOU, just gived both of you a thanks.
Thanks for the help =)
Just a last question, i want to install a new RUU, is there any method to not make me lose everything i have?
ekheeQ said:
Guys (i don't believe in god xD) so someone good BLESS YOU, just gived both of you a thanks.
Thanks for the help =)
Just a last question, i want to install a new RUU, is there any method to not make me lose everything i have?
Click to expand...
Click to collapse
flashing a RUU ..except SOFF and CID change (if you changed to superCID) you will lose everything ..so better do a backup of complete rom ...on sdcard ..then flash RUU and check it for yourself ..if you feel like reverting back
then ..just hboot flash like explained earlier
then custom recovery
then restore your backup
My hsdpa is working perfectly but 3g seems dead, could it be a solution to change my RUU?
ekheeQ said:
My hsdpa is working perfectly but 3g seems dead, could it be a solution to change my RUU?
Click to expand...
Click to collapse
even if you have 3g ..it shows h there ...so it is not dead
either the phone shows h/E/G thats all ..if you have h ..it means it is either hsdpa/3g/hspda+
Hi all,
Can someone help me to revert back to stock rom? I've tried to install Energy ROM but I got an error, and after that my device doesn't boot anymore (probably because I've wiped everything before installing). So, how can I go back to a stock rom please???
First of all u should of backed up everything.. find original stock rom and go into download mode and revetsr it
Sent from my GT-I9300 using xda premium
can you please help me by finding the stock rom (please)? Also, how's the download mode? I know how to go to fastboot by pressing vol down and power.
L.E. I found this link: http://www.filefactory.com/f/cf061f69b5bf7878/ but first of all I cannot download nothing from there, and second I don't know which one should I pick (I have S4 device).
L.E.2: Is it ok to use one of this? http://forum.xda-developers.com/showthread.php?t=1543588&page=57
Also, what I get when I'm in fastboot is:
VLE PVT SHIP S-ON RL
HBOOT-1.06.0000
RADIO-0.15.31501S.19
OpenDSP-v21.1.0.32.0314
eMMC-boot
Well, I've managed to make it worked, thx @CHEVYbarracuda1!
ady_uaic said:
can you please help me by finding the stock rom (please)? Also, how's the download mode? I know how to go to fastboot by pressing vol down and power.
L.E. I found this link: http://www.filefactory.com/f/cf061f69b5bf7878/ but first of all I cannot download nothing from there, and second I don't know which one should I pick (I have S4 device).
L.E.2: Is it ok to use one of this? http://forum.xda-developers.com/showthread.php?t=1543588&page=57
Also, what I get when I'm in fastboot is:
VLE PVT SHIP S-ON RL
HBOOT-1.06.0000
RADIO-0.15.31501S.19
OpenDSP-v21.1.0.32.0314
eMMC-boot
Well, I've managed to make it worked, thx @CHEVYbarracuda1!
Click to expand...
Click to collapse
If you wiped all, download the 2.31 ruu in your computer but first install stock recovery and close bootloader (fastboot oem lock comand) and install the ruu from pc i make that 2 times and works for me, like make a clean installation
Ivancp said:
If you wiped all, download the 2.31 ruu in your computer but first install stock recovery and close bootloader (fastboot oem lock comand) and install the ruu from pc i make that 2 times and works for me, like make a clean installation
Click to expand...
Click to collapse
Try to avoid running the latest RUU for the time being until you have tried other methods, once you run the latest RUU it will update your hboot version to 1.14 and it will cause a lot of problems for you when you want to upgrade your radio rom. Make sure youo have flashed the boot.img after you flash the rom otherwise it will cause your phone to hang on the load screen.
Here is a link to the appropraite RUU files http://forum.xda-developers.com/showthread.php?t=1543588. However i recommend you try a fresh install of Energy Rom with a full wipe (cache/dalvik/system/factory reset) and flash boot.img after to see if it fixes your problem because if you run RUU and update hboot there is no going back.
So this is my situation,
after using MaximusHD 10.0.0, I would like to go back to my stock rom. The problem is that I lost my nandroid back-up because of flashing another update version of twrp. I'm a little bit new to all this android flashing stuff, so I was wondering if anybody could help me?
I was planning of using a guild for this, which i can't post because i'm a new user, who says just to relock bootloader and use a RUU. But instead of using the T-mobile version, I wanted to use a RUU file for Europe.
Before I was going to start with this, I wanted to make a nandroid back-up, but CWM can't mount my SD-card.
So, how do I start going back to the stock rom from MaximusHD 10.0.0 on my HTC One S C4?
Ask for more info if needed!
[Update]: I found a solution for my can't mount SD Problem. So can somebody help me finding a right RUU? (I live in Belgium)
Try to flash TWRP, then you can backup.
And then flash an RUU
AndroGeek974 said:
Try to flash TWRP, then you can backup.
And then flash an RUU
Click to expand...
Click to collapse
So, do I need to first Relock my bootloader before I run the RUU? Or is it not needed because I'm S-OFF?
im also S-Off and on Hboot 2.16, now to get back to 2.15 is this the right way ?
flash my backup of stock 3.16 Jelly Bean in TWRP
relock the bootloader
Flash 3.16 RUU.exe
Thanks
So, last little question!
What happens if the RUU gives an error?
Does your ROM is still the way it was before if you cancel the RUU after error?
Or is your ROM deleted?
FantasyGamer said:
So, last little question!
What happens if the RUU gives an error?
Does your ROM is still the way it was before if you cancel the RUU after error?
Or is your ROM deleted?
Click to expand...
Click to collapse
Nothing happens, the installer stops and you are still the same as you were. So it doesn't hurt to try them.
[Update]: I found a solution for my can't mount SD Problem. So can somebody help me finding a right RUU? (I live in Belgium)[/QUOTE]
what is the solution , I have the exact same problem as you and want my stock rom back ?
beerfly said:
[Update]: I found a solution for my can't mount SD Problem. So can somebody help me finding a right RUU? (I live in Belgium)
Click to expand...
Click to collapse
what is the solution , I have the exact same problem as you and want my stock rom back ?[/QUOTE]
It's really easy, you just have to reflash the modded version of TWRP for MaximusHD 10.0.0. All the other versions of TWRP or cwm won't work.
FantasyGamer said:
what is the solution , I have the exact same problem as you and want my stock rom back ?
Click to expand...
Click to collapse
It's really easy, you just have to reflash the modded version of TWRP for MaximusHD 10.0.0. All the other versions of TWRP or cwm won't work. [/QUOTE]
its the version 2.6.1.0 is it, and have to flash it via fastboot right ?
[QUOTE/]its the version 2.6.1.0 is it, and have to flash it via fastboot right ? [/QUOTE]
Yes, that's the one! But take the file shipped with MaximusHD 10.0.0 because it's a modded version, and not the normal one of 2.6.1
FantasyGamer said:
[QUOTE/]its the version 2.6.1.0 is it, and have to flash it via fastboot right ?
Click to expand...
Click to collapse
Yes, that's the one! But take the file shipped with MaximusHD 10.0.0 because it's a modded version, and not the normal one of 2.6.1 [/QUOTE]
Yes I know its modded version , I tried to push it but it cant be done, Since I have CWM recovery, i cant put this TWRP one from maximus, it says failed: remote not allowed. I think it is because I relocked my bootloader, If I have to unlock it again, i wont be able to do it since cant use sd properly, so its doomed circle i think, need really big help guys . thanks in advance !
This is what i did.
1.oem relock
2. install org RUU, i downloaded one of the exe's and just let it do it's thing.
3. done.
4. rooted
5. flashed twrp
Okay,
So I just want to be sure about this.
Are these the ONLY steps I have to take?
1) Put device in Fastboot USB
2) Run RUU -> in this case http://www.androidruu.com/getdownload.php?file=Ville/RUU_Ville_U_JB_45_S_HTC_Europe_3.16.401.8_Radio_1.11.50.05.28_10.27.50.08L_release_301814_signed_2_4.exe
3) I have my old phone back with stock rom.
More info:
ROM: MaximusHD 10.0.0
***TAMPERED***
***UNLOCKED***
VLE PVT SHIP S-OFF RL
CID-11111111
HBOOT-2.16.0000
RADIO-1.20.50.05.16
FantasyGamer said:
Okay,
So I just want to be sure about this.
Are these the ONLY steps I have to take?
1) Put device in Fastboot USB
2) Run RUU -> in this case http://www.androidruu.com/getdownload.php?file=Ville/RUU_Ville_U_JB_45_S_HTC_Europe_3.16.401.8_Radio_1.11.50.05.28_10.27.50.08L_release_301814_signed_2_4.exe
3) I have my old phone back with stock rom.
More info:
ROM: MaximusHD 10.0.0
***TAMPERED***
***UNLOCKED***
VLE PVT SHIP S-OFF RL
CID-11111111
HBOOT-2.16.0000
RADIO-1.20.50.05.16
Click to expand...
Click to collapse
Relock the phone first, i don't know why, but i read on the forums that you have too when returning to stock.
1. in cmd "fastboot oem lock" phone now says "relocked"
2. from fastboot run RUU exe and wait.
3. done
In my case the RUU flashed me back to hboot 1.13, so install all updates from htc, then it updated to hboot 2.15.
So now you need to re-unlock the phone, and flash a new recovery.
If you want CM11 hboot 2.15 you need to flash modded recovery from http://forum.xda-developers.com/showthread.php?t=2528113
If you don't CM11 flash will fail.
Go here http://forum.xda-developers.com/showthread.php?t=1583427&highlight=tutorial and follow STEP 1.
That should re-unlock the phone.
STEP 2 flashes new recovery. Skip STEP 3.
After recovery has been flashed, boot into recovery, then press "reboot" and reboot to bootloader, if you flashed twrp it will ask to install superSU.
Now you are ready to flash anything again.
Is it necessary to re unlock?
Because i'm not planning on changing rom soon.
Thanks for the help!
You don't need to flash new rom, if you want to stay on stock you can, stock will still boot fine afterwards.
fusk said:
You don't need to flash new rom, if you want to stay on stock you can, stock will still boot fine afterwards.
Click to expand...
Click to collapse
I know, but is doesn't hurt not to re-unlock, right?
I succesfully went back to Android 4.0.4 :laugh:
I now want to perform an OTA . Do I first need to S-ON?
FantasyGamer said:
I succesfully went back to Android 4.0.4 :laugh:
I now want to perform an OTA . Do I first need to S-ON?
Click to expand...
Click to collapse
Just make sure you aren't SuperCid, or it could brick the phone.
I am currently running on MaximusHD rom. My phone's details are:
ROM: MaximusHD 10.0.0
***TAMPERED***
***UNLOCKED***
VLE PVT SHIP S-OFF RL
CID-11111111
HBOOT-2.16.0000
RADIO-1.20.50.05.16
When i executed RUU, it showed me "incorrect image. Find the correct RUU."
Which RUU i have to download for my phone?