STOCK ROM / bricked device! - HTC One S

Hi all,
Can someone help me to revert back to stock rom? I've tried to install Energy ROM but I got an error, and after that my device doesn't boot anymore (probably because I've wiped everything before installing). So, how can I go back to a stock rom please???

First of all u should of backed up everything.. find original stock rom and go into download mode and revetsr it
Sent from my GT-I9300 using xda premium

can you please help me by finding the stock rom (please)? Also, how's the download mode? I know how to go to fastboot by pressing vol down and power.
L.E. I found this link: http://www.filefactory.com/f/cf061f69b5bf7878/ but first of all I cannot download nothing from there, and second I don't know which one should I pick (I have S4 device).
L.E.2: Is it ok to use one of this? http://forum.xda-developers.com/showthread.php?t=1543588&page=57
Also, what I get when I'm in fastboot is:
VLE PVT SHIP S-ON RL
HBOOT-1.06.0000
RADIO-0.15.31501S.19
OpenDSP-v21.1.0.32.0314
eMMC-boot
Well, I've managed to make it worked, thx @CHEVYbarracuda1!

ady_uaic said:
can you please help me by finding the stock rom (please)? Also, how's the download mode? I know how to go to fastboot by pressing vol down and power.
L.E. I found this link: http://www.filefactory.com/f/cf061f69b5bf7878/ but first of all I cannot download nothing from there, and second I don't know which one should I pick (I have S4 device).
L.E.2: Is it ok to use one of this? http://forum.xda-developers.com/showthread.php?t=1543588&page=57
Also, what I get when I'm in fastboot is:
VLE PVT SHIP S-ON RL
HBOOT-1.06.0000
RADIO-0.15.31501S.19
OpenDSP-v21.1.0.32.0314
eMMC-boot
Well, I've managed to make it worked, thx @CHEVYbarracuda1!
Click to expand...
Click to collapse
If you wiped all, download the 2.31 ruu in your computer but first install stock recovery and close bootloader (fastboot oem lock comand) and install the ruu from pc i make that 2 times and works for me, like make a clean installation

Ivancp said:
If you wiped all, download the 2.31 ruu in your computer but first install stock recovery and close bootloader (fastboot oem lock comand) and install the ruu from pc i make that 2 times and works for me, like make a clean installation
Click to expand...
Click to collapse
Try to avoid running the latest RUU for the time being until you have tried other methods, once you run the latest RUU it will update your hboot version to 1.14 and it will cause a lot of problems for you when you want to upgrade your radio rom. Make sure youo have flashed the boot.img after you flash the rom otherwise it will cause your phone to hang on the load screen.
Here is a link to the appropraite RUU files http://forum.xda-developers.com/showthread.php?t=1543588. However i recommend you try a fresh install of Energy Rom with a full wipe (cache/dalvik/system/factory reset) and flash boot.img after to see if it fixes your problem because if you run RUU and update hboot there is no going back.

Related

[Q] Htc Desire S stuck on boot logo

Hey!
I have European ds. I rooted it and S-Offed it. Then I installed ICS Miui.
Problem is that I tried to install ds RUU trough usb connection. Ruu installed correctly, but when I booted ds normally it was completely stuck on boot logo.
I have read a lot of similar threads, but non of them has helped.
My Hboot version is 0.98.0000.
Can anybode help me? You can ask for more information.
popcappi said:
Hey!
I have European ds. I rooted it and S-Offed it. Then I installed ICS Miui.
Problem is that I tried to install ds RUU trough usb connection. Ruu installed correctly, but when I booted ds normally it was completely stuck on boot logo.
I have read a lot of similar threads, but non of them has helped.
My Hboot version is 0.98.0000.
Can anybode help me? You can ask for more information.
Click to expand...
Click to collapse
please write the contents of your current boot loader screen
Try to boot in recovery and flash an other rom or try to flash an another boot.img
ben_pyett said:
please write the contents of your current boot loader screen
Click to expand...
Click to collapse
-Revolutionary-
SAGA PVT SHIP S-OFF RL
HBOOT-6.98.1002
RADIO-38.03.02.15_M
eMMC-boot
HBOOT
<VOL UP> to previous item
<VOL DOWN> to next item
<POWER> to select item
FASTBOOT
RECOVERY
FACTORY RESET
SIMLOCK
IMAGE CRC
I have rooted my ds with revolutionary and downgraded my hboot.
My Hboot seems to be 6.98.1002.
It might have came with the endymion rom, which did not work. (But still the phone worked.)
I forgot to say that I installed cwm recovery, but after I installed the RUU it did not work.
ben_pyett said:
please write the contents of your current boot loader screen
Click to expand...
Click to collapse
d4k-pho3nix said:
Try to boot in recovery and flash an other rom or try to flash an another boot.img
Click to expand...
Click to collapse
I have the stock HTC Recovery as the CWM recovery got off when I installe dthe RUU. So I cannot do that.
I dont know how to flash boot.img
popcappi said:
-Revolutionary-
SAGA PVT SHIP S-OFF RL
HBOOT-6.98.1002
RADIO-38.03.02.15_M
eMMC-boot
Click to expand...
Click to collapse
You're still using the HBOOT installed by AlphaRev. I may be wrong here, but there is a chance that the stock HTC ROM is incompatible with the HBOOT you currently have on your device. What RUU did you install?
You may need to go back to an original 0.98 HBOOT or install an engineering HBOOT for the stock ROM to work properly.
You're right, RUU is not compatible with 6.98.1002.
Load to bootloader, then connect your phone with USB and push any rom with ADB, then install it from recovery.
mizerok said:
You're right, RUU is not compatible with 6.98.1002.
Load to bootloader, then connect your phone with USB and push any rom with ADB, then install it from recovery.
Click to expand...
Click to collapse
I cannot do that, my recovery is HTC stock as the cwm recovery got off when I installed the RUU
Have you tried booting into fastboot (Power + vol down) and flashing CWM or something using fastboot flash recovery recovery.img?
Then you should be able to use this tutorial to get back to stock.
That's what I did anyway. Hope it works for you.
EDIT: You can get the image here
No don't risk S-ON Head to this thread for help
http://forum.xda-developers.com/showthread.php?t=1488672

Restore device using fastboot only

Hello to all,
For some reason my HTC Sensation won't boot - it keeps on rebooting on the white htc screen.
It started doing this 1-2 weeks ago. Yesterday I managed to get inside the ClockworkMod Recovery somehow from HBOOT, and restored an old backup. Then I installed a newer radio and [ROM] Android Revolution HD 6.7.2 (the page recommended updating the radio). I also flashed the 4EXT Touch recovery, as it was required by this ROM, so I changed from Clockwork to 4EXT. The device worked for 1-2 hours, and then after one restart, it wouldn't boot again. This time I can't access anything but HBOOT and FASTBOOT.
Of course ADB doesn't work as I can't boot the device.
So the question is - what shall I update via fastboot "fastboot update update.zip" so that I restore my device? Or what file shall I put on the SD Card so that HBOOT can recover it (I have access to other devices, so I can place something on the SD card)?
I've been trying to flash various ROM's and RUU's but all of them give an error.
The configuration inside HBOOT says the following:
-Revolutionary-
PYRAMID PVT SHIP S-OFF RL
HBOOT-1.27.1100
RADIO-11.24A.3504.31_M
OpenADSP-v02.6.0.2226.00.0104
eMMC-boot
Jan 12 2012,17:33:34
I also tried flashing a few recoveries via fastboot (clockworkmod recovery.img and 4ext recovery.img), but could get inside them :/
Let me know what else could I do.
Thanks for the support!
I just managed to get to the ClockworkMod recovery and installed a new ROM - OpenSensation. It worked during the first boot, but then when I rebooted the phone - the same thing happens - it keeps on rebooting on the htc white screen.
Of course I can no longer go to the ClockworkMod recovery.
I also notice that when going back and fourth between HBOOT and FASTBOOT menus, at the top the version for RADIO appears and disappears.
I am not sure if all this is a hardware or software problem, but it is strange that from time to time I manage to get to a recovery and install a ROM which works for a while and then sends me back to this rebooting loop.
Any ideas?
Thanks!
Might be a hardware failure but.. First try ruu and restore to complete stock. Most of the times this fixes the issue..
For finding and flashing a ruu.. Look for ruu info guide by kgs1992 in sensation general section
Sent from my HTC Sensation 4G using xda premium
Thanks for the help. I managed to install successfully the following RUU:
RUU_Pyramid_HTC_Europe_1.50.401.1_Radio_10.56.9035.00U_10.14.9035.01_M_release_223042_signed
but it didn't work... it installed successfully, but the phone keeps on restarting on the white htc screen.
I figured that might be because of the firmware installed (I was on Android 4.0.x), so maybe this RUU is older.
I am downloading right now:
RUU_PYRAMID_ICS_HTC_Europe_3.32.401.5_R_Radio_11.69.3504.00U_11.22.3504.07_M_release_252064_signed.exe , which definitely must be Android 4.0.x so I hope it works.
Thanks for the help and thanks to kgs1992
Ruu is complete rom.. It has everything In it.. When you run ruu you shouldn't consider the firmware, recovery etc etc.. It has everything built in
So when you flashed the gb ruu.. It flash stock recovery, stock gb firmware and stock rom
So when you flashed gb ruu it has turned to complete gb rom.. Anyways less hope that the ICS ruu works fine
Sent from my HTC Sensation 4G using xda premium
Somehow I thought that the firmware is separate, although I wasn't sure.
Anyway - the fact is that after a successful RUU update, the phone keeps on rebooting and couldn't boot even once. I hope the next RUU fixes it.
thanks,
Anton
Still doesn't work after trying a second RUU: RUU_PYRAMID_ICS_HTC_Europe_3.33.401.6_Radio_11.76A.3504.00U_11.24A.3504.31_M_release_266171_signed.exe
The bootloader says:
*** LOCKED ***
PYRAMID PVT SHIP S-OFF RL
HBOOT-1.27.0000
RADIO-11.24A.3504.31_M
OpenADSP-v05.6.0.2226.00.0418
eMMC-boot
Jan 13 2012,17:33:34
Any ideas?
thanks,
Anton
try a AOSP ROM/CM9/CM10 lot of people had these kind of issues and they can boot only to a non sense roms ..may be you could boot fine on non-sense roms too
How would I flash CM9 CM10 or any AOSP, when I have access only to "fastboot". So far I could only flash those RUU-s from a Windows machine, as I can't get to any recovery.
Would it work if I try "fastboot update cm9.zip" or something similar?
Thanks,
Anton
nonsens3 said:
How would I flash CM9 CM10 or any AOSP, when I have access only to "fastboot". So far I could only flash those RUU-s from a Windows machine, as I can't get to any recovery.
Would it work if I try "fastboot update cm9.zip" or something similar?
Thanks,
Anton
Click to expand...
Click to collapse
Fastboot update command won't work
As you are soff.. You can flash jbhboot or 3.33 universal firmware with every thing removed except hboot_xxxx.nb0 file.. And unlock the hboot first
Then flash a recovery (you can avoid hboot flash and try a PG58IMG.zip file of recovery) from fastboot
Then from.. Recovery flash the cm9 or any AOSP rom
If you can't boot to recovery even after flashing the recovery fine.. Then try this command
fastboot boot recovery.img
(it boots into recovery temporarily.
From there you will flash a rom)
Sent from my HTC Sensation 4G using xda premium
nonsens3 said:
How would I flash CM9 CM10 or any AOSP, when I have access only to "fastboot". So far I could only flash those RUU-s from a Windows machine, as I can't get to any recovery.
Would it work if I try "fastboot update cm9.zip" or something similar?
Thanks,
Anton
Click to expand...
Click to collapse
You can try using Fastboot Commnder
Instructions:
-download tool
-unpack zip and click on .exe application (is a stand alone app, so you have to click and confirm installation, that's all!)
-open tool
-put DHD in "Fastboot Mode"
-plug it to your pc usb
-Wait for "print of device succesfull"--(if fails, check your sdk driver)
-here you go to "misc"
-select: erase partitions (system,cache,userdata,boot) Don't select recovery
-click on "Erase chosen partition"
-Done
You can use this tool to flash a new ROM or even to flash a recovery.img
Your problems might also come from not flashing the correct recovery.
Make sure you have the latest version. Good luck

Need RUU for CID BSTAR301

hello i was trying to put custom rom on my htc one s chip-s3, but its stuuck on htc logo.
the cid is BSTAR301
***unlocked***
VILLEC2 PVT SHIP S-ON RH
HBOOT-2.09.0001
RADIO-16.05.20.24_M
OpenDSP-v05.6.0.2226.00.0418
eMMC-boot
I'm looking for some ruu compatible with my phone please help
mee to, i need that XD
jdsr1986 said:
hello i was trying to put custom rom on my htc one s chip-s3, but its stuuck on htc logo.
the cid is BSTAR301
***unlocked***
VILLEC2 PVT SHIP S-ON RH
HBOOT-2.09.0001
RADIO-16.05.20.24_M
OpenDSP-v05.6.0.2226.00.0418
eMMC-boot
I'm looking for some ruu compatible with my phone please help
Click to expand...
Click to collapse
hey men use the custom rom trickdroid 2.0 (c2).
Link here.
http://trickdroid.org/trickdroid-v2-0-0-c2-29-09/
JavierArends said:
hey men use the custom rom trickdroid 2.0 (c2).
Link here.
http://trickdroid.org/trickdroid-v2-0-0-c2-29-09/
Click to expand...
Click to collapse
Well no ruu for now, but as JavierArends says you can use TrickDroid and BackToBasics Rom. I was having that problem too. No boot, stuck on htc screen. The problems is that ther is no base software 4.0.4+ for that phone. If you want to use your phone againa flash backtobasics, but that rom is Senseless, but works great, if you want Sense you can install TrickDroid this way:
Download trickdroid v2.0.0 , full wipe (user, cache, dalvik) flash Rom, go to bootloader adn flash boot.img and reboot until it works
After that you can download trickdoid v3.0.0 and flash only wiping cache and dalvik
that works for me
Hard Bricked?
plmosqueda said:
Well no ruu for now, but as JavierArends says you can use TrickDroid and BackToBasics Rom. I was having that problem too. No boot, stuck on htc screen. The problems is that ther is no base software 4.0.4+ for that phone. If you want to use your phone againa flash backtobasics, but that rom is Senseless, but works great, if you want Sense you can install TrickDroid this way:
Download trickdroid v2.0.0 , full wipe (user, cache, dalvik) flash Rom, go to bootloader adn flash boot.img and reboot until it works
After that you can download trickdoid v3.0.0 and flash only wiping cache and dalvik
that works for me
Click to expand...
Click to collapse
Hello i have the same problem here.. but my HBOOT is like this
***relocked***
***Security Warning***
VILLEC2 PVT SHIP S-ON RH
HBOOT-2.09.0001
RADIO-16.05.20.24_M
OpenDSP-v05.6.0.2226.00.0418
i got bootloop usin trickdroid 4 so i try to restore a backup using recovery, but the phone got stuck again, so i try to install a RUU but since then i cant enter to recovery, if what your saying can be done, how can i flash it what command prom shut i use to flash trickdroid 2, shut i unzip the file an then flash it whit fastboot, thanks for your help
eMMC-boot
DarkSnakeEater said:
Hello i have the same problem here.. but my HBOOT is like this
***relocked***
***Security Warning***
VILLEC2 PVT SHIP S-ON RH
HBOOT-2.09.0001
RADIO-16.05.20.24_M
OpenDSP-v05.6.0.2226.00.0418
i got bootloop usin trickdroid 4 so i try to restore a backup using recovery, but the phone got stuck again, so i try to install a RUU but since then i cant enter to recovery, if what your saying can be done, how can i flash it what command prom shut i use to flash trickdroid 2, shut i unzip the file an then flash it whit fastboot, thanks for your help
eMMC-boot
Click to expand...
Click to collapse
If you can enter to bootloader you can run a ruu from there. If you the locked the bootloader the ruu has to work fine. In order to install trick droid you have to unlock boot loader , install recovery and gain root access. I think the only thing you have to flash with fast boot is the boot.img
Sent from my Nexus 7 using xda app-developers app
plmosqueda said:
If you can enter to bootloader you can run a ruu from there. If you the locked the bootloader the ruu has to work fine. In order to install trick droid you have to unlock boot loader , install recovery and gain root access. I think the only thing you have to flash with fast boot is the boot.img
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
i flash the boot.img that trickdroid gave me, shut i flash whit original boot from villec2? where can i get it?
so is there a ruu to my phone model?
or shut i try whit trickdkdroid 2.0
im from venezuela to can contact you?
plmosqueda said:
Well no ruu for now, but as JavierArends says you can use TrickDroid and BackToBasics Rom. I was having that problem too. No boot, stuck on htc screen. The problems is that ther is no base software 4.0.4+ for that phone. If you want to use your phone againa flash backtobasics, but that rom is Senseless, but works great, if you want Sense you can install TrickDroid this way:
Download trickdroid v2.0.0 , full wipe (user, cache, dalvik) flash Rom, go to bootloader adn flash boot.img and reboot until it works
After that you can download trickdoid v3.0.0 and flash only wiping cache and dalvik
that works for me
Click to expand...
Click to collapse
do you think that you could install trickdroid v4.0.0 after the v3.0.0? or is there another step needed?
cheers
lihamm said:
do you think that you could install trickdroid v4.0.0 after the v3.0.0? or is there another step needed?
cheers
Click to expand...
Click to collapse
Last time i Tried but gives me some screem resolution problems. Maybe i was doing something bad, I think you can try from a fresh install, maybe works fine. Ill try later but if you try and works fine tell us please
Rom
All you guys can do is go to a differnt Rom for now and way for RRU update to come out for you guys!
I say http://forum.xda-developers.com/showthread.php?t=2000854&page=3 this rom will be good for you guys
if you want to stay update
plmosqueda said:
Last time i Tried but gives me some screem resolution problems. Maybe i was doing something bad, I think you can try from a fresh install, maybe works fine. Ill try later but if you try and works fine tell us please
Click to expand...
Click to collapse
yeah it gives me some messed up pink screen, and my icons are negatives. for now im just running v3.0.0.
such a shame that we have one of the worst phones for custom roms
DrSaV23 said:
All you guys can do is go to a differnt Rom for now and way for RRU update to come out for you guys!
I say http://forum.xda-developers.com/showthread.php?t=2000854&page=3 this rom will be good for you guys
if you want to stay update
Click to expand...
Click to collapse
I have a HTC One S villec s3, and I unlocked it using the official HTCDev method, then I tried to install CWM but I couldn't, then I successfuly installed TWRP, and it worked fine.
I made a backup of the official ROM so good, but after doing factory reset, wiping cache/dalvik I accidentally press power and the phone was powered off. Now when I turn it on I can get into bootloader but I can't enter into TWRP, I tried reinstalling TWRP but I can not get into TWRP, only thing that I see is the logo of TWRP and suddenly restart.
--- Im writting on this thread --- http://forum.xda-developers.com/showthread.php?p=37382834#post37382834
---------- Post added at 02:25 PM ---------- Previous post was at 02:19 PM ----------
DarkSnakeEater said:
i flash the boot.img that trickdroid gave me, shut i flash whit original boot from villec2? where can i get it?
so is there a ruu to my phone model?
or shut i try whit trickdkdroid 2.0
im from venezuela to can contact you?
Click to expand...
Click to collapse
Epale pana! Soy de venezuela tambien... Lograste algo? Por lo menos encontrar una RUU que nos sirva?
i think i found it :
http://www.htcmania.com/showthread.php?t=479693
emin3sku said:
i think i found it :
http://www.htcmania.com/showthread.php?t=479693
Click to expand...
Click to collapse
Hi, I went to that thread, and tried to download the rom, it is in dropbox, but teh account has exceeded the allowed traffic, can someone reupload this file to mega or mediafire?=
RUU for BSTAR301 DONT EXIST. YOU NEED BE S-OFF AND CHANGE YOUR CID FOR ANOTHER LIKE ASIAN CID TO USE THAT RUU
---------- Post added at 10:20 PM ---------- Previous post was at 10:19 PM ----------
yurais said:
OK, maybe
but
is there any way to flash only the hboot to the phone ? because I can not flash stock ROM, am S-ON and I havent found a higher stock rom for this phone CID.
Click to expand...
Click to collapse
my bad.. you are from telcel.. so you have the annoying CID BSTAR301. i found a JB OTA from our CID http://www.shipped-roms.com/downloa...15.20.29_M_release_315588dsq1aqy4avpc8u41.zip but.. i don't know if works.... you can try install some sense based ROM like viper compatible with Moonshine to get S-OFF or you can try install any ROM and try rumrunner to S-OFF. after that you can try fastboot oem overwrite cid HTC__044 or something like that... its HTC Asian CID.. if that not work you can try this
xiaolvmu said:
OK... @JavierG123
I already found an existing tutorial:
http://forum.xda-developers.com/showthread.php?p=26516911
The only difference is, VilleC2 can't use 11111111. You can change it to HTC__044 (Asia Version)
Then, in this download page : http://androidruu.com/?developer=VilleC2
Download this: RUU_VILLEC2_U_ICS_40_S_hTC_Asia_WWE_2.15.707.101_Radio_16.21.20.02U_16.09.20.11_M2_release_289564_signed.exe
Then you can flash the pure RUU
ps: The Hex Editor on Windows is a paid software, so I'll give a cracked version
https://www.dropbox.com/s/ath1t92jrs4lm78/Hex Editor for changing CID.zip?dl=0
Click to expand...
Click to collapse
Well, here is what I have done so far...
Downloaded the Ruu Asia, downloaded the BSTAR OTA and downloaded Viper also...
Flashed Viper rom and Wrote the Viper boot.img file and phone keeps in bootloop.
So, At this time I opened IR'Key software and after reading phone info I could notice teh CID was changed itself from BSTAR to HTC__01, awesome, I would no believe it. SO I used teh sane software and edited the CID to be the ASIAN one, and it CHANGED !!
great
I then tried to flash the Stock Asian RUU, first I relocked the BOOT.
The RUU started to work and gave an error complaining the MODEL is not compatible
Now I cant enter recovery, and cant unlock bootloader vbecause the unlockFile doesnt work (I think I have to go through all the way to the bootloader unlock process to install the recovery again)
The question is, do I have to also edit the Model ID ? and what is the correct model ID for the ASIAN RUU to be compatible ?

[SOLVED] MaximusHD 10.0.0 back to Stock

So this is my situation,
after using MaximusHD 10.0.0, I would like to go back to my stock rom. The problem is that I lost my nandroid back-up because of flashing another update version of twrp. I'm a little bit new to all this android flashing stuff, so I was wondering if anybody could help me?
I was planning of using a guild for this, which i can't post because i'm a new user, who says just to relock bootloader and use a RUU. But instead of using the T-mobile version, I wanted to use a RUU file for Europe.
Before I was going to start with this, I wanted to make a nandroid back-up, but CWM can't mount my SD-card.
So, how do I start going back to the stock rom from MaximusHD 10.0.0 on my HTC One S C4?
Ask for more info if needed!
[Update]: I found a solution for my can't mount SD Problem. So can somebody help me finding a right RUU? (I live in Belgium)
Try to flash TWRP, then you can backup.
And then flash an RUU
AndroGeek974 said:
Try to flash TWRP, then you can backup.
And then flash an RUU
Click to expand...
Click to collapse
So, do I need to first Relock my bootloader before I run the RUU? Or is it not needed because I'm S-OFF?
im also S-Off and on Hboot 2.16, now to get back to 2.15 is this the right way ?
flash my backup of stock 3.16 Jelly Bean in TWRP
relock the bootloader
Flash 3.16 RUU.exe
Thanks
So, last little question!
What happens if the RUU gives an error?
Does your ROM is still the way it was before if you cancel the RUU after error?
Or is your ROM deleted?
FantasyGamer said:
So, last little question!
What happens if the RUU gives an error?
Does your ROM is still the way it was before if you cancel the RUU after error?
Or is your ROM deleted?
Click to expand...
Click to collapse
Nothing happens, the installer stops and you are still the same as you were. So it doesn't hurt to try them.
[Update]: I found a solution for my can't mount SD Problem. So can somebody help me finding a right RUU? (I live in Belgium)[/QUOTE]
what is the solution , I have the exact same problem as you and want my stock rom back ?
beerfly said:
[Update]: I found a solution for my can't mount SD Problem. So can somebody help me finding a right RUU? (I live in Belgium)
Click to expand...
Click to collapse
what is the solution , I have the exact same problem as you and want my stock rom back ?[/QUOTE]
It's really easy, you just have to reflash the modded version of TWRP for MaximusHD 10.0.0. All the other versions of TWRP or cwm won't work.
FantasyGamer said:
what is the solution , I have the exact same problem as you and want my stock rom back ?
Click to expand...
Click to collapse
It's really easy, you just have to reflash the modded version of TWRP for MaximusHD 10.0.0. All the other versions of TWRP or cwm won't work. [/QUOTE]
its the version 2.6.1.0 is it, and have to flash it via fastboot right ?
[QUOTE/]its the version 2.6.1.0 is it, and have to flash it via fastboot right ? [/QUOTE]
Yes, that's the one! But take the file shipped with MaximusHD 10.0.0 because it's a modded version, and not the normal one of 2.6.1
FantasyGamer said:
[QUOTE/]its the version 2.6.1.0 is it, and have to flash it via fastboot right ?
Click to expand...
Click to collapse
Yes, that's the one! But take the file shipped with MaximusHD 10.0.0 because it's a modded version, and not the normal one of 2.6.1 [/QUOTE]
Yes I know its modded version , I tried to push it but it cant be done, Since I have CWM recovery, i cant put this TWRP one from maximus, it says failed: remote not allowed. I think it is because I relocked my bootloader, If I have to unlock it again, i wont be able to do it since cant use sd properly, so its doomed circle i think, need really big help guys . thanks in advance !
This is what i did.
1.oem relock
2. install org RUU, i downloaded one of the exe's and just let it do it's thing.
3. done.
4. rooted
5. flashed twrp
Okay,
So I just want to be sure about this.
Are these the ONLY steps I have to take?
1) Put device in Fastboot USB
2) Run RUU -> in this case http://www.androidruu.com/getdownload.php?file=Ville/RUU_Ville_U_JB_45_S_HTC_Europe_3.16.401.8_Radio_1.11.50.05.28_10.27.50.08L_release_301814_signed_2_4.exe
3) I have my old phone back with stock rom.
More info:
ROM: MaximusHD 10.0.0
***TAMPERED***
***UNLOCKED***
VLE PVT SHIP S-OFF RL
CID-11111111
HBOOT-2.16.0000
RADIO-1.20.50.05.16
FantasyGamer said:
Okay,
So I just want to be sure about this.
Are these the ONLY steps I have to take?
1) Put device in Fastboot USB
2) Run RUU -> in this case http://www.androidruu.com/getdownload.php?file=Ville/RUU_Ville_U_JB_45_S_HTC_Europe_3.16.401.8_Radio_1.11.50.05.28_10.27.50.08L_release_301814_signed_2_4.exe
3) I have my old phone back with stock rom.
More info:
ROM: MaximusHD 10.0.0
***TAMPERED***
***UNLOCKED***
VLE PVT SHIP S-OFF RL
CID-11111111
HBOOT-2.16.0000
RADIO-1.20.50.05.16
Click to expand...
Click to collapse
Relock the phone first, i don't know why, but i read on the forums that you have too when returning to stock.
1. in cmd "fastboot oem lock" phone now says "relocked"
2. from fastboot run RUU exe and wait.
3. done
In my case the RUU flashed me back to hboot 1.13, so install all updates from htc, then it updated to hboot 2.15.
So now you need to re-unlock the phone, and flash a new recovery.
If you want CM11 hboot 2.15 you need to flash modded recovery from http://forum.xda-developers.com/showthread.php?t=2528113
If you don't CM11 flash will fail.
Go here http://forum.xda-developers.com/showthread.php?t=1583427&highlight=tutorial and follow STEP 1.
That should re-unlock the phone.
STEP 2 flashes new recovery. Skip STEP 3.
After recovery has been flashed, boot into recovery, then press "reboot" and reboot to bootloader, if you flashed twrp it will ask to install superSU.
Now you are ready to flash anything again.
Is it necessary to re unlock?
Because i'm not planning on changing rom soon.
Thanks for the help!
You don't need to flash new rom, if you want to stay on stock you can, stock will still boot fine afterwards.
fusk said:
You don't need to flash new rom, if you want to stay on stock you can, stock will still boot fine afterwards.
Click to expand...
Click to collapse
I know, but is doesn't hurt not to re-unlock, right?
I succesfully went back to Android 4.0.4 :laugh:
I now want to perform an OTA . Do I first need to S-ON?
FantasyGamer said:
I succesfully went back to Android 4.0.4 :laugh:
I now want to perform an OTA . Do I first need to S-ON?
Click to expand...
Click to collapse
Just make sure you aren't SuperCid, or it could brick the phone.
I am currently running on MaximusHD rom. My phone's details are:
ROM: MaximusHD 10.0.0
***TAMPERED***
***UNLOCKED***
VLE PVT SHIP S-OFF RL
CID-11111111
HBOOT-2.16.0000
RADIO-1.20.50.05.16
When i executed RUU, it showed me "incorrect image. Find the correct RUU."
Which RUU i have to download for my phone?

Restoring my device

Current state:
Boots into bootloader
Recovery not working
HBOOT 1.13
Fastboot working
S4 Version.
How can I restore my device? Please help
[SOLVED]
Solution:
I flashed PhilZ CWM Touch recovery in the All-in-One Toolkit and it booted into recovery.
Then I flashed a new rom and performed fastboot flash boot boot.img and my device is now working again!
S-ON btw
What do you mean by "restoring"?
I guess it's not booting anymore!?
Either try to flash a new recovery or
relock phone, download and install the latest RUU.
Sent from my One S using xda app-developers app
Shadee13 said:
What do you mean by "restoring"?
Click to expand...
Click to collapse
To, at least, be able to install a rom
drkxyz said:
I guess it's not booting anymore!?
Either try to flash a new recovery or
relock phone, download and install the latest RUU.
Sent from my One S using xda app-developers app
Click to expand...
Click to collapse
I tried to flash a new recovery 3 times, it didn't work.
Could you tell me how to relock my phone and what RUU to install?
Thanks!
You can use the All-in-One Toolkit to relock the bootloader
http://forum.xda-developers.com/showthread.php?t=1604677
You can also use the above tool to try to install a recovery - maybe you are lucky
Download the RUU for your provider. Get a list here
http://www.androidruu.com/?developer=Ville
Just copy the file to a windows machine, connect to your One S (HTC drivers have to be installed)
and execute the RUU. The phone will be deleted and a stock Rom is installed.
After that you can re-unlock the bootloader, install a custom recovery and then the Rom you prefer.
Some people say that you don't have to relock the bootloader to install the RUU. Well it never
worked for me, but you can try it first.
Get more information here (no need to s-off the phone)
http://forum.xda-developers.com/showthread.php?t=2501542
Good luck
StayChill said:
I tried to flash a new recovery 3 times, it didn't work.
Could you tell me how to relock my phone and what RUU to install?
Thanks!
Click to expand...
Click to collapse
Thanks for all your help! Only one problem, the download links are removed by a moderator. If you have the file, can you mail it to [email protected]? I appreciate your help!
drkxyz said:
You can use the All-in-One Toolkit to relock the bootloader
http://forum.xda-developers.com/showthread.php?t=1604677
You can also use the above tool to try to install a recovery - maybe you are lucky
Download the RUU for your provider. Get a list here
http://www.androidruu.com/?developer=Ville
Just copy the file to a windows machine, connect to your One S (HTC drivers have to be installed)
and execute the RUU. The phone will be deleted and a stock Rom is installed.
After that you can re-unlock the bootloader, install a custom recovery and then the Rom you prefer.
Some people say that you don't have to relock the bootloader to install the RUU. Well it never
worked for me, but you can try it first.
Get more information here (no need to s-off the phone)
http://forum.xda-developers.com/showthread.php?t=2501542
Good luck
Click to expand...
Click to collapse
drkxyz said:
You can use the All-in-One Toolkit to relock the bootloader
http://forum.xda-developers.com/showthread.php?t=1604677
You can also use the above tool to try to install a recovery - maybe you are lucky
Download the RUU for your provider. Get a list here
http://www.androidruu.com/?developer=Ville
Just copy the file to a windows machine, connect to your One S (HTC drivers have to be installed)
and execute the RUU. The phone will be deleted and a stock Rom is installed.
After that you can re-unlock the bootloader, install a custom recovery and then the Rom you prefer.
Some people say that you don't have to relock the bootloader to install the RUU. Well it never
worked for me, but you can try it first.
Get more information here (no need to s-off the phone)
http://forum.xda-developers.com/showthread.php?t=2501542
Good luck
Click to expand...
Click to collapse
So unfortunately I can't use the All-In-One Toolkit...
Is there an alternative?
Also, I tried to run several RUU's, but they seem to be uncompatible with my device.
I'm European and the device is simlock-free.
This is the device info:
Tampered
Unlocked
VLE PVT SHIP S-ON RL
HBOOT-1.13.0000
RADIO-0.16.31501S.17_2
OpenDSP-v25.1.0.32.0405
eMMC-boot
Apr 20 2012, 15:14:18
Any ideas of what RUU I should pick?
Thank you very much!
I use the following RUU
RUU_Ville_U_JB_45_S_HTC_Europe_3.16.401.8_Radio_1.11.50.05.28_10.27.50.08L_release_301814_signed_2_4.exe
which you can find in the above link. It's the latest official HTC One S rom.
PS: I PM'd you ...
StayChill said:
So unfortunately I can't use the All-In-One Toolkit...
Is there an alternative?
Also, I tried to run several RUU's, but they seem to be uncompatible with my device.
I'm European and the device is simlock-free.
This is the device info:
Tampered
Unlocked
VLE PVT SHIP S-ON RL
HBOOT-1.13.0000
RADIO-0.16.31501S.17_2
OpenDSP-v25.1.0.32.0405
eMMC-boot
Apr 20 2012, 15:14:18
Any ideas of what RUU I should pick?
Thank you very much!
Click to expand...
Click to collapse
Back to Stock Tmo
Got a One s off ebay after the wife dropped hers. It cam with Cyangenmod on it and the wife is having issues.
As I did not put cyan on it, not sure how to get it off and put Tmo Stock sense back on it.
I looked at the Ruu's and there are several Tmo ones listed, any idea which one I would need?
And..... not to be an idiot...... but maybe step by step instructions on how to do it?
Gdraft1 said:
Got a One s off ebay after the wife dropped hers. It cam with Cyangenmod on it and the wife is having issues.
As I did not put cyan on it, not sure how to get it off and put Tmo Stock sense back on it.
I looked at the Ruu's and there are several Tmo ones listed, any idea which one I would need?
And..... not to be an idiot...... but maybe step by step instructions on how to do it?
Click to expand...
Click to collapse
This should be the ruu to run it you will need to flash stock recovery and lock boot loader then put it in fast boot mode from the boot loader then run the tool

Categories

Resources