[Q] [q] htc sensation 4g bootloop - HTC Sensation

Ok so i had an ICS rom running on my sensation and then i saw the virtuous incision rom and i wanted it. so i updated to 3.32 and i wiped data, dalvic,and cache and then flashed the rom but it just keeps looping. I can't flash any other rom either because it does the same thing. And i do have supercid. Please help!! (

Are you soff?
If not and you are htcdev unlocked
Then you need to extract boot.img from the rom zip file (usually in kernels folder)
Then you need to flash the boot.img via fastboot
Command
fastboot flash boot boot.img
sent from my blazing fast pyramid through sonic waves

I am soff. what can i do?

josheluno said:
I am soff. what can i do?
Click to expand...
Click to collapse
So there's no problem... When you said you had ics rom you might have 3.32 firmware.. Why update it again? Any ways what's your hboot saying now? post all the stuff in hboot..
Also I recommend you to do a factory reset / wipe all partitions except sd card... From the custom recovery you have and flash the rom again... If you are on 3.32 then you should not have any problem
sent from my blazing fast pyramid through sonic waves

reply
It says
-Revolutionary-
PYRAMID PVT SHIP S-OFF RL
HBOOT- 1. 27. 1100
Radio- 11.22. 3504_7M
OpenADSP-v02.6.0.2226.00.0131
eMMC-boot
and i updated because i thought i needed to for the new rom, i see now I'm an idiot Dx

also
I tried flashing the rom again after wiping like you said, and i just got to boot loop again D:

Then the only reason Is firmware is not properly flashed... Get the 3.32 firmware from this thread and flash it again...
http://forum.xda-developers.com/showthread.php?t=1412618
Then flash the rom again on top of it.. Also this time do a factory reset/format
sent from my blazing fast pyramid through sonic waves

what it said
when i tried to update again it would say parsing and then it wouldn't start the update with the latest file of the link you sent me
nvm i just needed to use my windows computer for it my mac kept unzipping it

josheluno said:
when i tried to update again it would say parsing and then it wouldn't start the update with the latest file of the link you sent me
Click to expand...
Click to collapse
Make sure the name is fine.. It should be PG58IMG if you are using windows..And keep it on top of sdcard..
Then hboot should automatically find the update (try this couple of times)
If it still doesn't work. Get 3.24 firmware from the same link and flash it and see
Btw you are supercid right? Also the hboot you posted earlier is fine.
sent from my blazing fast pyramid through sonic waves

reply
i flashed it, and i am supercid, now I'm waiting to see if itl work
it just goes back to the boot loop

What did i do wrong?
It continues to boot loop after everything

josheluno said:
It continues to boot loop after everything
Click to expand...
Click to collapse
Do one thing right now you got virtuous rom right.
Try to do a restore from backup... From your custom recovery.. I assume you have Nand backup..
And see that solves the problem
Otherwise
2. Extract the boot.img from the rom you've flashed.. (it will be in kernel folder inside the zip file) Then flash the boot.img via fastboot.. Keep the boot.img in your adb folder and Type this
"fastboot flash boot boot.img"
3rd chance
3.flash 3.24 firmware from the thread ive linked.. And flash the rom again.
Final chance
Get the ICS RUU of Europe one (get this from pyramid shipped rom collections) thread GOOGLE it) and run the RUU.. With you phone connected to your device in fastboot
This will restore you to stock ics... After this you'll have to flash recovery and all again
sent from my blazing fast pyramid through sonic waves

No luck
I have tried everything, and it just goes back to the same boot loop : (

josheluno said:
I have tried everything, and it just goes back to the same boot loop : (
Click to expand...
Click to collapse
what about the final chance one ???
is RUU run from pc is completed and exited normally ?

Where do you get the ruu??
ganeshp said:
what about the final chance one ???
is RUU run from pc is completed and exited normally ?
Click to expand...
Click to collapse
where do you get the ruu??

josheluno said:
where do you get the ruu??
Click to expand...
Click to collapse
I'm having the same problem as you but with S-ON
I downloaded the RUU from here
http://forum.xda-developers.com/showthread.php?t=1074559
I think you will have to re-lock before install. Not sure.
I run into errors, but I hope this works for you

Are u still looping pm me
Sent from my Sensation using xda premium

Related

Sensation ICS problems

The thing is Im running a rooted android and I tried installing the InsertCoin ICS update and it gets stuck in the booting screen and restarts. How can I get ICS on my rooted sensation4g?
Thanks in advance
Update to the proper firmware for ICS. ICS and GB ROMs have different firmware.
Here is the thread http://forum.xda-developers.com/showthread.php?t=1459767
Make sure you read this throughly before attempting to flash. Make sure you have S-Off and your CID is 11111111
Good luck.
Sent from my Sensation 4G using XDA
Thank you
mazune said:
Thank you
Click to expand...
Click to collapse
You're welcome.
I just tried this and now my phone is stuck on the boot screen it keeps looping over and over again, is there any way i can like wipe the whole phone and start back from 0?
mazune said:
I just tried this and now my phone is stuck on the boot screen it keeps looping over and over again, is there any way i can like wipe the whole phone and start back from 0?
Click to expand...
Click to collapse
More details please.. Then we can understand stand your situation better..
Post all the hboot details and what's the last rom you've tried to install
Sent from my pyramid.. Through blazing fast sonic waves
ganeshp said:
More details please.. Then we can understand stand your situation better..
Post all the hboot details and what's the last rom you've tried to install
Sent from my pyramid.. Through blazing fast sonic waves
Click to expand...
Click to collapse
Locked
Pyramid PVT SHIP S-OFF RL
Hboot - 1.27.0000
Radio-10.14.9035.01_M
eMMC-boot
I tried to install a T-mobile rom found here http://forum.xda-developers.com/showthread.php?t=1459767
This one to be exact.
DOWNLOAD 3.32 Unlocked: http://goo.gl/znhyw
MD5: 0f07e24bbb2a9a927164fab374e5246d
Then it started to loop and I placed this in the sd card.
PATCH FIRMWARE FILES FOR CARRIERS (Use this if you bootloop using 3.24 - 3.32. Flash like normal firmware)
TMO - http://goo.gl/4O0Tq
bump I really need help here
mazune said:
bump I really need help here
Click to expand...
Click to collapse
you are SOFF..but your radio is too old..for ICS
that's the issue for your bootloop
whats your cid ?
anyways as you are SOFF we will change your cid to superCID (its fine as you can revert it back) if you are already super cid then ignore the next steps and go to firmware steps
supercid: (assumed that you have adb/fastboot setup on your pc)
go to fastboot on your mobile and connect it to pc (mobile reads "fastboot usb" after this )
then go to your adb folder on your pc and type this command
fastboot oem writecid 11111111 (eight ones)
then you are done you are supercid now
now you need to flash firmware 3.32 and install whatever ICS rom you want
firmware 3.32 and flashing any ICS ROM
this is by far the best guide to do that
FIRMWARE 3.32 and ARHD ...you can use the same steps for installing any ICS ROM even though the guide explained on flashing ARHD
Got it working thanks a lot

[Q] Sensation XE wont boot (Alrdy searched this problem for hrs)

So basically i want to start "tuning" my Htc SENSATION XE, and i was looking around to install a cool ROM and i found that Revolutionary 6.7.0 with beats audio.
I was reading all the steps in order to successfully install the ROM.
Ofc my phone is alrdy S-OFF with supercid, but KEEP IN MIND IT WAS NOT ENG H-BOOT.
So i've rooted my phone, rebooted and all went smooth.. than i saw i was in need to update the RADIO.img, in order to do that i need the ENG-H BOOT. (HERE COMES THE PROBLEM)
I've flashed the ENG - HBOOT but when i reboot my phone it won't work, it just keep booting and stuck in beatsaudio logo, than reboot again and again.
So i've tried to restore by using a backup that i've done. Also i've deleted the PG58xxx.img and installed 3.3 firmware, nothing to do still not working, still bootloading and restart.
PLS Any help?
Thats what i see in Fastboot mode
PYRAMID PVT ENG S-OFF RL
HBOOT - 1.17.2008 (PG5813001)
RADIO-11.24A. 3504.31_M
eMMC-boot
May 13 2011, 21:04:03
UPDATE: Tried also to install InsterCoin ROM, and nothing work.
Seems it is a boot problem, its like it wont boot the system and keep rebooting over and over...
I'm not 100 percent sure but your hboot doesn't seem right it should be 1.27. Try flashing the unlock version of 3.32 or 3.33 and try installing a rom.
Sent from my Sensation using xda app-developers app
The hboot you flashed is Completely wrong one
To have correct one.. Flash the 3.32 universal Firmware Then 3.33 firmware
Or alternatively you can flash the jb hboot
For jb hboot go here
http://unlimited.io/hboot-downloads/
Get the pyramid ics one.. From there
And flash it the following way
Connect the phone in bootloader to pc.
Copy the downloaded file to the adb/fastboot folder of your pc.
.. Open a command windows from your adb/fastboot folder
Then type these commands one by one
fastboot erase cache (if failed ignore it)
fastboot oem rebootRUU (black screen with silver htc)
fastboot flash zip jb_hboot.zip (if failed here.. Let me know)
fastboot reboot
Sent from my pyramid.. Through blazing fast sonic waves
Guys (i don't believe in god xD) so someone good BLESS YOU, just gived both of you a thanks.
Thanks for the help =)
Just a last question, i want to install a new RUU, is there any method to not make me lose everything i have?
ekheeQ said:
Guys (i don't believe in god xD) so someone good BLESS YOU, just gived both of you a thanks.
Thanks for the help =)
Just a last question, i want to install a new RUU, is there any method to not make me lose everything i have?
Click to expand...
Click to collapse
flashing a RUU ..except SOFF and CID change (if you changed to superCID) you will lose everything ..so better do a backup of complete rom ...on sdcard ..then flash RUU and check it for yourself ..if you feel like reverting back
then ..just hboot flash like explained earlier
then custom recovery
then restore your backup
My hsdpa is working perfectly but 3g seems dead, could it be a solution to change my RUU?
ekheeQ said:
My hsdpa is working perfectly but 3g seems dead, could it be a solution to change my RUU?
Click to expand...
Click to collapse
even if you have 3g ..it shows h there ...so it is not dead
either the phone shows h/E/G thats all ..if you have h ..it means it is either hsdpa/3g/hspda+

Help - stuck, hopefully didn't brick my phone

Hi all,
I hope one of you masterminds is able to help me out.
I tried to root my sensation without s-off with hecdev.com (using One_X_All-In-One_Kit_v1.0) and then tried to install cm9 from one the links here via revcovery with CWM 5.8.0.9.
But then I was stuck with the loading animation...
I cannot run Android now, so I cannot flash a stock RUU.
I can enter bootloader, which seems to be unlocked, here's the info:
"Unlocked"
PYRAMID PVT SHIP S-ON RL
HBOOT-1.27.0000
eMMC-boot
Jan 13 2012,17:33:34
I was on the latest official ROM (ICS, via OTA) before trying that.
I have not succeeded in flashing a ROM anymore.
Do I need to get S-Off first?
Or is HBOOT to new? Do I have to revert? How?
I tried older HBOOT, but it wouldn'T do anything after PArsing
Please help, any hint is appreciated =/
PS: I would be more than happy to have a stock rom again...as mentioned, cannot use a ruu.exe file, as it seems fastboot usb ist not recognizable by ruu.exe
Edit: After the 4th or 5th try, RUU recognized the phone when in fastboot usb mode, but update fdailed, cwm saif "security fail" ... sigh, seems I really blew it this time
the_bmg said:
PS: I would be more than happy to have a stock rom again...as mentioned, cannot use a ruu.exe file, as it seems fastboot usb ist not recognizable by ruu.exe
Edit: After the 4th or 5th try, RUU recognized the phone when in fastboot usb mode, but update fdailed, cwm saif "security fail" ... sigh, seems I really blew it this time
Click to expand...
Click to collapse
Hi,
Start again using THIS GUIDE
Flash the boot.img from your ROM through fastboot.
Extra step 1 from this guide: http://forum.xda-developers.com/showthread.php?p=25587345
Be sure to use the boot.img from your ROM.
Then make a clean install of the ROM again.
Also, read that thread for the sake of understanding what you're doing.
There is NO need yet to flash an RUU.
Latest OTA comes with hboot 1.29 which is locked.
You might not be in the latest one, perhaps start with an RUU with.the latest fw (3.33).
Sent from my HTC Sensation using xda premium
thanks malybru & kgs1992 - tried that, and the 4ext touch recoery said both superwipe and the rom installed correctly.
but when rebooting the white screen with the green htc logo appears right away and nothing more happens...any idea? I may have messed up the kernel before, but when asked by ext4 recovery whether to flash a kernel, tried both custom and stock, none changed the problem with booting up
@Raven2k: Manually installing boot.img with fastbok seemed to help, at least I come over the white screen, am stuck with the beatsaudio logo right now - thanks so far =)
the_bmg said:
thanks malybru & kgs1992 - tried that, and the 4ext touch recoery said both superwipe and the rom installed correctly.
but when rebooting the white screen with the green htc logo appears right away and nothing more happens...any idea? I may have messed up the kernel before, but when asked by ext4 recovery whether to flash a kernel, tried both custom and stock, none changed the problem with booting up
Click to expand...
Click to collapse
Can you try this again
Flash boot.img again as kgs explained
Then flash the rom again... Don't do any wipe
Sent from my pyramid.. Through blazing fast sonic waves
Amazing, guys! Thanks for your help, my phone is back :good::fingers-crossed::laugh:
the_bmg said:
Amazing, guys! Thanks for your help, my phone is back :good::fingers-crossed::laugh:
Click to expand...
Click to collapse
good
and for thanks ..there is a button for that

Stuck at boot screen

I've just come from Virtuous senseless to SmartDroid, I went to 4ext, formatted everything as per usual, installed the rom, installed this kernel;
http://forum.xda-developers.com/showthread.php?t=1256668
now when rebooting my phone, it's stuck at the android boot screen.
on hboot I have the following details;
*** LOCKED ***
Pyramid PVT SHIP S-OFF RL
HBOOT- 1.29.0000
RADIO-11.24A.3504.31_M
OpenADSPV05.6.0.2226.00.0418
eMMC boot
Why isn't my phone going bast the booting screen, why does my phone only work with android revolution and virtuous inquisition?
any help is majorly appreciated
david.
Have you updated to newest firmware 3.33? Some Roms require it most run 3.32 and 3.33 however I've noticed some asking for 3.33.perhaps this could be a issue? Does the Rom suggest on the developers site 3.33?
Just a thought? Your s off , you have 4ext recovery, your wiping cash and dalvik, wipe data factory reset, you have done all that, perhaps its the firmware? Also did you check the md5 sums before installing to make sure they match developers? If they don't match it could be a corrupted download. If they are matching I'd read over the specs for that particular Rom and see if 3.33 is a requirement. Best wishes.
Sent from my Sensation 4G using Tapatalk 2
realsis said:
Have you updated to newest firmware 3.33? Some Roms require it most run 3.32 and 3.33 however I've noticed some asking for 3.33.perhaps this could be a issue? Does the Rom suggest on the developers site 3.33?
Just a thought? Your s off , you have 4ext recovery, your wiping cash and dalvik, wipe data factory reset, you have done all that, perhaps its the firmware? Also did you check the md5 sums before installing to make sure they match developers? If they don't match it could be a corrupted download. If they are matching I'd read over the specs for that particular Rom and see if 3.33 is a requirement. Best wishes.
Sent from my Sensation 4G using Tapatalk 2
Click to expand...
Click to collapse
thank you so much for the reply, yeah I have updated to that newest 3.33 firmware, and i did also do a md5 check and it matches. yeah 3.33 is a requirement for the rom too, so i'm a little confused as to why my sensation doesnt want to boot... is their anything im doing wrong?
ddavij said:
thank you so much for the reply, yeah I have updated to that newest 3.33 firmware, and i did also do a md5 check and it matches. yeah 3.33 is a requirement for the rom too, so i'm a little confused as to why my sensation doesnt want to boot... is their anything im doing wrong?
Click to expand...
Click to collapse
as the rom is just flashed ..you need to wait until its properly booted ..then reboot to recovery again and flash the kernel (always flash mods/kernels is not advisable ...during first flash of ROM)
now ..do a complete wipe again (4EXT -> wipe|format -> format all partitions except sdcard) then flash the rom ..boot it up ..then go back to recovery and then flash the kernel
ganeshp said:
as the rom is just flashed ..you need to wait until its properly booted ..then reboot to recovery again and flash the kernel (always flash mods/kernels is not advisable ...during first flash of ROM)
Click to expand...
Click to collapse
thanks for reply ill try thank now
ganeshp said:
as the rom is just flashed ..you need to wait until its properly booted ..then reboot to recovery again and flash the kernel (always flash mods/kernels is not advisable ...during first flash of ROM)
now ..do a complete wipe again (4EXT -> wipe|format -> format all partitions except sdcard) then flash the rom ..boot it up ..then go back to recovery and then flash the kernel
Click to expand...
Click to collapse
did exactly this, followed you're steps, still not booting into android, stuck at the andorid loading boot screen :/
ddavij said:
did exactly this, followed you're steps, still not booting into android, stuck at the andorid loading boot screen :/
Click to expand...
Click to collapse
first boot takes some time in my case it took 10 minutes and based on your reply time..i suggest you to wait for few more minutes
ganeshp said:
first boot takes some time in my case it took 10 minutes and based on your reply time..i suggest you to wait for few more minutes
Click to expand...
Click to collapse
i left my phone for over 3 hours, still at the same screen.
ddavij said:
i left my phone for over 3 hours, still at the same screen.
Click to expand...
Click to collapse
Hey.. Then my best suggestion is to run a ics ruu... This is just for cleaning all the partitions.. Then flash back recovery nd restore your rom... Also then mostly other roms works too
Sent from my pyramid.. Through blazing fast sonic waves
ganeshp said:
Hey.. Then my best suggestion is to run a ics ruu... This is just for cleaning all the partitions.. Then flash back recovery nd restore your rom... Also then mostly other roms works too
Sent from my pyramid.. Through blazing fast sonic waves
Click to expand...
Click to collapse
thanks for the reply, does this mean that i have to root the phone again basically? yeah i guess i'll need to do this
ddavij said:
thanks for the reply, does this mean that i have to root the phone again basically? yeah i guess i'll need to do this
Click to expand...
Click to collapse
you are SOFF and you wont lose it if you run a RUU ...
after RUU
you just flash a custom recovery and flash a custom ROM thats all
ganeshp said:
you are SOFF and you wont lose it if you run a RUU ...
after RUU
you just flash a custom recovery and flash a custom RM thats all
Click to expand...
Click to collapse
haha great couldnt be easier! I'll do that right now!

Need RUU for CID BSTAR301

hello i was trying to put custom rom on my htc one s chip-s3, but its stuuck on htc logo.
the cid is BSTAR301
***unlocked***
VILLEC2 PVT SHIP S-ON RH
HBOOT-2.09.0001
RADIO-16.05.20.24_M
OpenDSP-v05.6.0.2226.00.0418
eMMC-boot
I'm looking for some ruu compatible with my phone please help
mee to, i need that XD
jdsr1986 said:
hello i was trying to put custom rom on my htc one s chip-s3, but its stuuck on htc logo.
the cid is BSTAR301
***unlocked***
VILLEC2 PVT SHIP S-ON RH
HBOOT-2.09.0001
RADIO-16.05.20.24_M
OpenDSP-v05.6.0.2226.00.0418
eMMC-boot
I'm looking for some ruu compatible with my phone please help
Click to expand...
Click to collapse
hey men use the custom rom trickdroid 2.0 (c2).
Link here.
http://trickdroid.org/trickdroid-v2-0-0-c2-29-09/
JavierArends said:
hey men use the custom rom trickdroid 2.0 (c2).
Link here.
http://trickdroid.org/trickdroid-v2-0-0-c2-29-09/
Click to expand...
Click to collapse
Well no ruu for now, but as JavierArends says you can use TrickDroid and BackToBasics Rom. I was having that problem too. No boot, stuck on htc screen. The problems is that ther is no base software 4.0.4+ for that phone. If you want to use your phone againa flash backtobasics, but that rom is Senseless, but works great, if you want Sense you can install TrickDroid this way:
Download trickdroid v2.0.0 , full wipe (user, cache, dalvik) flash Rom, go to bootloader adn flash boot.img and reboot until it works
After that you can download trickdoid v3.0.0 and flash only wiping cache and dalvik
that works for me
Hard Bricked?
plmosqueda said:
Well no ruu for now, but as JavierArends says you can use TrickDroid and BackToBasics Rom. I was having that problem too. No boot, stuck on htc screen. The problems is that ther is no base software 4.0.4+ for that phone. If you want to use your phone againa flash backtobasics, but that rom is Senseless, but works great, if you want Sense you can install TrickDroid this way:
Download trickdroid v2.0.0 , full wipe (user, cache, dalvik) flash Rom, go to bootloader adn flash boot.img and reboot until it works
After that you can download trickdoid v3.0.0 and flash only wiping cache and dalvik
that works for me
Click to expand...
Click to collapse
Hello i have the same problem here.. but my HBOOT is like this
***relocked***
***Security Warning***
VILLEC2 PVT SHIP S-ON RH
HBOOT-2.09.0001
RADIO-16.05.20.24_M
OpenDSP-v05.6.0.2226.00.0418
i got bootloop usin trickdroid 4 so i try to restore a backup using recovery, but the phone got stuck again, so i try to install a RUU but since then i cant enter to recovery, if what your saying can be done, how can i flash it what command prom shut i use to flash trickdroid 2, shut i unzip the file an then flash it whit fastboot, thanks for your help
eMMC-boot
DarkSnakeEater said:
Hello i have the same problem here.. but my HBOOT is like this
***relocked***
***Security Warning***
VILLEC2 PVT SHIP S-ON RH
HBOOT-2.09.0001
RADIO-16.05.20.24_M
OpenDSP-v05.6.0.2226.00.0418
i got bootloop usin trickdroid 4 so i try to restore a backup using recovery, but the phone got stuck again, so i try to install a RUU but since then i cant enter to recovery, if what your saying can be done, how can i flash it what command prom shut i use to flash trickdroid 2, shut i unzip the file an then flash it whit fastboot, thanks for your help
eMMC-boot
Click to expand...
Click to collapse
If you can enter to bootloader you can run a ruu from there. If you the locked the bootloader the ruu has to work fine. In order to install trick droid you have to unlock boot loader , install recovery and gain root access. I think the only thing you have to flash with fast boot is the boot.img
Sent from my Nexus 7 using xda app-developers app
plmosqueda said:
If you can enter to bootloader you can run a ruu from there. If you the locked the bootloader the ruu has to work fine. In order to install trick droid you have to unlock boot loader , install recovery and gain root access. I think the only thing you have to flash with fast boot is the boot.img
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
i flash the boot.img that trickdroid gave me, shut i flash whit original boot from villec2? where can i get it?
so is there a ruu to my phone model?
or shut i try whit trickdkdroid 2.0
im from venezuela to can contact you?
plmosqueda said:
Well no ruu for now, but as JavierArends says you can use TrickDroid and BackToBasics Rom. I was having that problem too. No boot, stuck on htc screen. The problems is that ther is no base software 4.0.4+ for that phone. If you want to use your phone againa flash backtobasics, but that rom is Senseless, but works great, if you want Sense you can install TrickDroid this way:
Download trickdroid v2.0.0 , full wipe (user, cache, dalvik) flash Rom, go to bootloader adn flash boot.img and reboot until it works
After that you can download trickdoid v3.0.0 and flash only wiping cache and dalvik
that works for me
Click to expand...
Click to collapse
do you think that you could install trickdroid v4.0.0 after the v3.0.0? or is there another step needed?
cheers
lihamm said:
do you think that you could install trickdroid v4.0.0 after the v3.0.0? or is there another step needed?
cheers
Click to expand...
Click to collapse
Last time i Tried but gives me some screem resolution problems. Maybe i was doing something bad, I think you can try from a fresh install, maybe works fine. Ill try later but if you try and works fine tell us please
Rom
All you guys can do is go to a differnt Rom for now and way for RRU update to come out for you guys!
I say http://forum.xda-developers.com/showthread.php?t=2000854&page=3 this rom will be good for you guys
if you want to stay update
plmosqueda said:
Last time i Tried but gives me some screem resolution problems. Maybe i was doing something bad, I think you can try from a fresh install, maybe works fine. Ill try later but if you try and works fine tell us please
Click to expand...
Click to collapse
yeah it gives me some messed up pink screen, and my icons are negatives. for now im just running v3.0.0.
such a shame that we have one of the worst phones for custom roms
DrSaV23 said:
All you guys can do is go to a differnt Rom for now and way for RRU update to come out for you guys!
I say http://forum.xda-developers.com/showthread.php?t=2000854&page=3 this rom will be good for you guys
if you want to stay update
Click to expand...
Click to collapse
I have a HTC One S villec s3, and I unlocked it using the official HTCDev method, then I tried to install CWM but I couldn't, then I successfuly installed TWRP, and it worked fine.
I made a backup of the official ROM so good, but after doing factory reset, wiping cache/dalvik I accidentally press power and the phone was powered off. Now when I turn it on I can get into bootloader but I can't enter into TWRP, I tried reinstalling TWRP but I can not get into TWRP, only thing that I see is the logo of TWRP and suddenly restart.
--- Im writting on this thread --- http://forum.xda-developers.com/showthread.php?p=37382834#post37382834
---------- Post added at 02:25 PM ---------- Previous post was at 02:19 PM ----------
DarkSnakeEater said:
i flash the boot.img that trickdroid gave me, shut i flash whit original boot from villec2? where can i get it?
so is there a ruu to my phone model?
or shut i try whit trickdkdroid 2.0
im from venezuela to can contact you?
Click to expand...
Click to collapse
Epale pana! Soy de venezuela tambien... Lograste algo? Por lo menos encontrar una RUU que nos sirva?
i think i found it :
http://www.htcmania.com/showthread.php?t=479693
emin3sku said:
i think i found it :
http://www.htcmania.com/showthread.php?t=479693
Click to expand...
Click to collapse
Hi, I went to that thread, and tried to download the rom, it is in dropbox, but teh account has exceeded the allowed traffic, can someone reupload this file to mega or mediafire?=
RUU for BSTAR301 DONT EXIST. YOU NEED BE S-OFF AND CHANGE YOUR CID FOR ANOTHER LIKE ASIAN CID TO USE THAT RUU
---------- Post added at 10:20 PM ---------- Previous post was at 10:19 PM ----------
yurais said:
OK, maybe
but
is there any way to flash only the hboot to the phone ? because I can not flash stock ROM, am S-ON and I havent found a higher stock rom for this phone CID.
Click to expand...
Click to collapse
my bad.. you are from telcel.. so you have the annoying CID BSTAR301. i found a JB OTA from our CID http://www.shipped-roms.com/downloa...15.20.29_M_release_315588dsq1aqy4avpc8u41.zip but.. i don't know if works.... you can try install some sense based ROM like viper compatible with Moonshine to get S-OFF or you can try install any ROM and try rumrunner to S-OFF. after that you can try fastboot oem overwrite cid HTC__044 or something like that... its HTC Asian CID.. if that not work you can try this
xiaolvmu said:
OK... @JavierG123
I already found an existing tutorial:
http://forum.xda-developers.com/showthread.php?p=26516911
The only difference is, VilleC2 can't use 11111111. You can change it to HTC__044 (Asia Version)
Then, in this download page : http://androidruu.com/?developer=VilleC2
Download this: RUU_VILLEC2_U_ICS_40_S_hTC_Asia_WWE_2.15.707.101_Radio_16.21.20.02U_16.09.20.11_M2_release_289564_signed.exe
Then you can flash the pure RUU
ps: The Hex Editor on Windows is a paid software, so I'll give a cracked version
https://www.dropbox.com/s/ath1t92jrs4lm78/Hex Editor for changing CID.zip?dl=0
Click to expand...
Click to collapse
Well, here is what I have done so far...
Downloaded the Ruu Asia, downloaded the BSTAR OTA and downloaded Viper also...
Flashed Viper rom and Wrote the Viper boot.img file and phone keeps in bootloop.
So, At this time I opened IR'Key software and after reading phone info I could notice teh CID was changed itself from BSTAR to HTC__01, awesome, I would no believe it. SO I used teh sane software and edited the CID to be the ASIAN one, and it CHANGED !!
great
I then tried to flash the Stock Asian RUU, first I relocked the BOOT.
The RUU started to work and gave an error complaining the MODEL is not compatible
Now I cant enter recovery, and cant unlock bootloader vbecause the unlockFile doesnt work (I think I have to go through all the way to the bootloader unlock process to install the recovery again)
The question is, do I have to also edit the Model ID ? and what is the correct model ID for the ASIAN RUU to be compatible ?

Categories

Resources