Hello everyone,
Would anyone help me please to direct me to a thread or instruction where I can update my rooted device from 2.3.6 to ice. I tried to do it thought wifi but it didn't work. I heard that I have to downgrade to 2.3.5 then update it to ice. I tried to go back to 2.3.5 but I couldn't "install aborted". As of now, I reset my phone and do not know what to do.
Any help is appreciated.
Thanks
GueSs_me said:
Hello everyone,
Would anyone help me please to direct me to a thread or instruction where I can update my rooted device from 2.3.6 to ice. I tried to do it thought wifi but it didn't work. I heard that I have to downgrade to 2.3.5 then update it to ice. I tried to go back to 2.3.5 but I couldn't "install aborted". As of now, I reset my phone and do not know what to do.
Any help is appreciated.
Thanks
Click to expand...
Click to collapse
Refer noob guide under general section on how to use rsd lite..flash to stock using rsdlite and update over wifi
Sent from my MB865 using xda app-developers app
If you took some time to read you wouldnt haveto waste a post....
This page will get u onto leak one.... the only version of ics u can go back to gb from..... follow the directions.... and u MUST be on 2.3.6 and i recomend a fresh install of 2.3.6....
Here is the link.... read the op and you will have all the info u need....
http://forum.xda-developers.com/showthread.php?t=1779968
Sent from my MB865 using xda app-developers app
daavvis said:
If you took some time to read you wouldnt haveto waste a post....
This page will get u onto leak one.... the only version of ics u can go back to gb from..... follow the directions.... and u MUST be on 2.3.6 and i recomend a fresh install of 2.3.6....
Here is the link.... read the op and you will have all the info u need....
http://forum.xda-developers.com/showthread.php?t=1779968
Sent from my MB865 using xda app-developers app
Click to expand...
Click to collapse
Thanks for your response. I went thought this thread before you provided and I followed the instruction but the installation aborted. So, I though that I was in the wrong thread. I spent two days trying to flash my device but I couldn't. That is way I need some help and guidance!!!
Thanks again,
GueSs_me said:
Thanks for your response. I went thought this thread before you provided and I followed the instruction but the installation aborted. So, I though that I was in the wrong thread. I spent two days trying to flash my device but I couldn't. That is way I need some help and guidance!!!
Thanks again,
Click to expand...
Click to collapse
I need a whole lot more information to help you out.
1) What was the EXACT error you got.
2) Did you actually fxz to 2.3.6, before attempting to apply the blur zip file?
3) Did you try and root or restore anything before trying to apply the blur zip file, including signing into goolge?
4) Did you install ANY CWM bootstrap or the like, before trying to apply the blur zip file?
I would fxz to 2.3.6 and try again to apply the Blur zip file, and this time, please capture the error message with as much detail as possible, so that I know what to tell you to do next. Also next time please post this in my leak #1 thread, instead of a new one, thanks.
jimbridgman said:
I need a whole lot more information to help you out.
1) What was the EXACT error you got.
2) Did you actually fxz to 2.3.6, before attempting to apply the blur zip file?
3) Did you try and root or restore anything before trying to apply the blur zip file, including signing into goolge?
4) Did you install ANY CWM bootstrap or the like, before trying to apply the blur zip file?
I would fxz to 2.3.6 and try again to apply the Blur zip file, and this time, please capture the error message with as much detail as possible, so that I know what to tell you to do next. Also next time please post this in my leak #1 thread, instead of a new one, thanks.
Click to expand...
Click to collapse
Here is an attached screenshot for the error I got. I was in 2.3.5 then I root my device and flash to 2.3.6, so I am using 2.3.6. I reset my device and tried to flash the Blur zip but I couldn't. I am using Atrix 2 Bootstrapper. hope this help! Thanks again for your time.
GueSs_me said:
Here is an attached screenshot for the error I got. I was in 2.3.5 then I root my device and flash to 2.3.6, so I am using 2.3.6. I reset my device and tried to flash the Blur zip but I couldn't. I am using Atrix 2 Bootstrapper. hope this help! Thanks again for your time.
Click to expand...
Click to collapse
Yeah you can not just do a factory reset. You HAVE to fxz back to 2.3.6 from scratch, even if you are already on 2.3.6. Go grab the 2.3.6 fxz and flash that with RSD lite, then try again. It is real important that you flash the fxz and the do nothing, not even sign into google, or install ANYTHING, before trying to update with the zip file. I see that your build.prop was the issue in your error, that tells me you did not fxz, and you MUST do that.
Oh and By the way you can get the 2.3.6 FXZ from here:
http://sbf.droid-developers.org/edison/list.php
And this is the file you want, if you are on AT&T:
InlineFlashing_Edison_67.21.125_CFC_P3_APBP.xml.zip
jimbridgman said:
Yeah you can not just do a factory reset. You HAVE to fxz back to 2.3.6 from scratch, even if you are already on 2.3.6. Go grab the 2.3.6 fxz and flash that with RSD lite, then try again. It is real important that you flash the fxz and the do nothing, not even sign into google, or install ANYTHING, before trying to update with the zip file. I see that your build.prop was the issue in your error, that tells me you did not fxz, and you MUST do that.
Oh and By the way you can get the 2.3.6 FXZ from here:
http://sbf.droid-developers.org/edison/list.php
And this is the file you want, if you are on AT&T:
InlineFlashing_Edison_67.21.125_CFC_P3_APBP.xml.zip
Click to expand...
Click to collapse
Thank you so much, if you don't mind, I will update you when I finish doing what you recommended.
Ok, now I did use the RSD lite to go back to the fxz 2.3.6. All the process went will and I got the PASS under the status. When the device started I notice that I am in ICE not 2.3.6!! so do I have to do the next step in this thread ??
http://forum.xda-developers.com/show....php?t=1779968
GueSs_me said:
Ok, now I did use the RSD lite to go back to the fxz 2.3.6. All the process went will and I got the PASS under the status. When the device started I notice that I am in ICE not 2.3.6!! so do I have to do the next step in this thread ??
http://forum.xda-developers.com/show....php?t=1779968
Click to expand...
Click to collapse
No. You are on ICS now the same version as the ota, which by the way is no longer off limits sine we have an ICS fxz, as you just witnessed. You can use the root from thread though, if you want root.
jimbridgman said:
No. You are on ICS now the same version as the ota, which by the way is no longer off limits sine we have an ICS fxz, as you just witnessed. You can use the root from thread though, if you want root.
Click to expand...
Click to collapse
Thank you soooo much for your kind help and your time as well.
Do any of the sr contributors ever read what they post in NOOB sections or procedures
I see many SR responders that I can guess just live and make a living off of modifying and changing android system. Problem is that unless you do things everyday. Many of the abbreviations and shortening of terms is the cause of many of the questions us part time modify-er of phones ask.
But unless you do it everyday. Simple for many but many tasks have to be reviewed and gone over again and re-read. Many modify and then only do it again when they get tired or have a new phone. Many of us have some of the same desires and likes but don't have the time or inclination to do it fulltime or live for programming and Modifying. Were users. We don't like the stock bloats and addons that we get with stock phones.
Simple example is going from 2.3.6 operating version to 4.04. Have a thread [HOW TO] get your AT&T phone onto ICS Leak #1 - Process Updated 11/11/2012.
Simple questions such as ON GB or figuring out if my phone modifying OR I have put Leak 1 or 2 on my phone. or ICS OTA. just figuring out what a leak meant was a task.
With my Atrix2 I went from 2.3.5 to root to 2.3.6 with a modified ROM. So back tracking and knowing if I'm in ICS of 2.3.6 or a modified version . That won't work. By reading it seems to be that to go to 4.04 you need to be in stock ATT FXZ by using the RSD lite. Then get the new 4.04 over the air (OTA)
Then you have a stock 4.04 . You then can go do the root zip. Then load titimium backup and reload all of your apps and settings.
But read how your write your procedures. Probably get half as many questions if most of the links work. Example try to find RSD Lite 6.0 link.
You then add into all of this mix different phones, MFG's. etc. Example Atrix is almost in 3 different versions.
Also all the crap that is added to the end of post. Half the time there is more adds and quips and comments that get added and added to each response. That slows the reading from what is important to glaze over at the added 4 inches of not need to know.
Not a pretty picture. Sure many don't read more then one or two links. But doesn't help when you send a read and you'll find the answer. Just either answer or don't respond.
How you abbreviate the answer is only going to make part timers ask the same question time after time. It's nice sharing information. But just make a SR section if you don't want us to ask questions. That have been asked - and asked-
537magspc said:
I see many SR responders that I can guess just live and make a living off of modifying and changing android system. Problem is that unless you do things everyday. Many of the abbreviations and shortening of terms is the cause of many of the questions us part time modify-er of phones ask.
But unless you do it everyday. Simple for many but many tasks have to be reviewed and gone over again and re-read. Many modify and then only do it again when they get tired or have a new phone. Many of us have some of the same desires and likes but don't have the time or inclination to do it fulltime or live for programming and Modifying. Were users. We don't like the stock bloats and addons that we get with stock phones.
Simple example is going from 2.3.6 operating version to 4.04. Have a thread [HOW TO] get your AT&T phone onto ICS Leak #1 - Process Updated 11/11/2012.
Simple questions such as ON GB or figuring out if my phone modifying OR I have put Leak 1 or 2 on my phone. or ICS OTA. just figuring out what a leak meant was a task.
With my Atrix2 I went from 2.3.5 to root to 2.3.6 with a modified ROM. So back tracking and knowing if I'm in ICS of 2.3.6 or a modified version . That won't work. By reading it seems to be that to go to 4.04 you need to be in stock ATT FXZ by using the RSD lite. Then get the new 4.04 over the air (OTA)
Then you have a stock 4.04 . You then can go do the root zip. Then load titimium backup and reload all of your apps and settings.
But read how your write your procedures. Probably get half as many questions if most of the links work. Example try to find RSD Lite 6.0 link.
You then add into all of this mix different phones, MFG's. etc. Example Atrix is almost in 3 different versions.
Also all the crap that is added to the end of post. Half the time there is more adds and quips and comments that get added and added to each response. That slows the reading from what is important to glaze over at the added 4 inches of not need to know.
Not a pretty picture. Sure many don't read more then one or two links. But doesn't help when you send a read and you'll find the answer. Just either answer or don't respond.
How you abbreviate the answer is only going to make part timers ask the same question time after time. It's nice sharing information. But just make a SR section if you don't want us to ask questions. That have been asked - and asked-
Click to expand...
Click to collapse
Where did this come from? And what did this have to do with the OP's question?
You just screwed yourself by doing to the OP what you claimed is an issue with:
537magspc said:
Also all the crap that is added to the end of post. Half the time there is more adds and quips and comments that get added and added to each response. That slows the reading from what is important to glaze over at the added 4 inches of not need to know
Click to expand...
Click to collapse
Now if you have something to post to help the OP, even though this has been solved, then spit it out. If you have a question then ask it, otherwise go post elsewhere, as this post was utter crap and disrespectful to all of the people in the Atrix2 forum.
--EDIT--
Yeah I get one thing you were complaining about was peoples signatures, but too bad. People have every right to put whatever they want in their signature, and it does not need to have anything to do with anything, and sure does not need to even be related to android. I am guessing that your work e-mail signature is boring and dry and just has your name and title... Mine at work actually lists all my certifications in binary, so... Again if you do not like it, go someplace else.
Yeah I am being harsh, but for your 5th post total and, looking at the other junk you have posted you are not off to a good start. Stop whining and grow up, and read, read, and oh yeah read EVERYTHING again, you might actually learn something. If you do not understand an acronym, then ask what that means. I would rather have someone ask what is an FXZ or what is RSD lite and how do I get it, than having someone complain about it, in the insulting way that you have.
Oh and one last thing, ALL of us in here do this for free in our free time, and are not "pros" as you so insinuated, so you might also think about that the next time you post.
Related
This guide is for if you are on Android 2.1 and want to get 2.2. If you are fine with 2.1 use this guide. If you already have Cognition you can use this just skip the install cognition step. If you are on a different version of 2.2 you need to do an ODIN reset (second to last page of guide)
UPDATED 10/11
This is a guide that is similar to the other guide however it is for DesignGears Cognition ROM.
Drivers
Rooting
Clockwork Recovery
Unlock
Installing ROM
LCD Density Hack
Launcher Pro
Battery Optimizations
Desktop Syncing
TV Out
ODIN One-Click Restore
This guide was created to be as user friendly as possible, so the easiest method was was shown for all of the above, even if it is not the best.
PLEASE READ THIS GUIDE BEFORE POSTING ANY QUESTIONS BECAUSE IT IS MOST LIKELY ALREADY BEEN COVERED
You can download the guide here.
If you would like to help out with the guide that would be great. Just PM me the section and I may include it in the next version of the guide.
This guide took a lot of work. If it helped you please consider donating a few dollars. http://bit.ly/cplmLk
Won't be upgrading now, but just wanted to say thanks for this and the other one.
From a phone on an app
boborone said:
Won't be upgrading now, but just wanted to say thanks for this and the other one.
From a phone on an app
Click to expand...
Click to collapse
No problem! If your still thinking about upgrading I would say its worth it. DesignGear(s?) makes great ROMS. However it does erase your userdata (although for something the files still remain on the SD card (like music). In addition in you want the official Froyo release you will have to use ODIN to flash back.
So, I just want to clear things up for myself.
Right now, I am running Eugene's ROM.
I will flash back to stock JF6
I can download the Cog 2.2 BETA6.zip file. Put it on my SD card and flash it using Clockwork.
If I want to flash back to JF6, I can use Odin to that.
Does all that seem right or is there more to it?
I did read the guide and it is excellent. I am just hesistant here, so just wanted some confirmation.
Thank you for your awesome work.
xtremekilla09 said:
So, I just want to clear things up for myself.
Right now, I am running Eugene's ROM.
I will flash back to stock JF6
I can download the Cog 2.2 BETA6.zip file. Put it on my SD card and flash it using Clockwork.
If I want to flash back to JF6, I can use Odin to that.
Does all that seem right or is there more to it?
I did read the guide and it is excellent. I am just hesistant here, so just wanted some confirmation.
Thank you for your awesome work.
Click to expand...
Click to collapse
You use ODIN to get back to stock 2.1. Then follow the guide to the beginning. A summary of the steps to get cognition is:
Flash to 2.1 Eclar
Root the 2.1
Flash the zip file with clockwork
And skip JH7 altogether? Cognition contains the JH7 "fixes"?
tbong777 said:
And skip JH7 altogether? Cognition contains the JH7 "fixes"?
Click to expand...
Click to collapse
That is what my understanding. I did this with an un modded captivate. I am pretty sure that was JH6. If you have a PC you can always just use his ODIN flash to install it and that is that. But I have a Mac so I made my guide Mac friendly.
pretty decent guide
Great Guide, Works Awesome!
Samsung Captivate
AT&T
Install went smooth as can be. I had to install the drivers, as told by the guide, but I think you may have missed a step?
Under "Installing Froyo --> Prepare" you may want to add a note that the phone has to be in Mass Storage mode to transfer the ZIP. Not sure if this is always true, but I did have to do that on my own (it was not showing the phone when it was sitting in debugging mode.)
I will be sending you a $5 donation. Really wish I could send more, but simply cannot. I am hoping others are doing the same, as this guide is awesome...
I did have one question about the 2.2 update. I heard somewhere that this would fix the GPS issue, however, I am experiencing the same issues with connectivity. Does anybody know if Samsung/AT&T plan on fixing this?
Again, thanks!
------EDIT------ Donation sent.
SiL3nTKiLL said:
pretty decent guide
Click to expand...
Click to collapse
I think asking for a donation for copy & pasting postings into a PDF is cheap.
But I suppose you can't blame a guy for trying to skim some money off what should be going to the actual cooks.
Hey, no offense.
~nevermind~
EpicEric said:
~nevermind~
Click to expand...
Click to collapse
haha I copied from my own PDF but I think you figured that out.
Gotta appreciate the tech writers out there! thanks for the post.
No Froyo
Where it says,
"Download the ROM from pocknack thing (technically new user and cant post outside link)
I go to the link and it gives me a 4040 error. anywhere else to download this from?
muleskinner93 said:
Where it says,
"Download the ROM from pocknack thing (technically new user and cant post outside link)
I go to the link and it gives me a 4040 error. anywhere else to download this from?
Click to expand...
Click to collapse
If you look @ the date on the OP (Opening Post) then you'll see where your issue is.
This is an older thread. So the file no longer available.
Although I do commend you for ACTUALLY LOOKING for a tutorial thread and not opening a new topic.
The steps will all still work though. You can get the most recent version of Cognition (3.04 i think) in the link in my Sig
Happy Flashing!
thanks marzo, i found it. i just finished flashing and now im waiting for it to boot up with FROYO!
Not a problem... And it really is a Rearity that a person actually searches for answers around here.
Better to *BUMP* an old thread then open YET another.
Be careful though.. This is a very addictive habbit that your forming!
Can you update the guide for theh persons with the update to froyo 2.2 from AT&T.
Thanks.
Thank You!!
Thank you very much for this it was just what I was searching for!
thanx
thanks for this
Hello all,
I've been lurking the XDA forums for a couple months now. I had a couple posts in the past referring to my phone and my girlfriends phone and was looking for help mainly with hers at the time... Hers is fixed... Perfectly even, despite her phone being a total piece of garbage (an LG Optimus.... *barf*).
I have a SGH-T959V.
I have read the 10 commandments.
I KNOW my phone is NOT a Vibrant OR an i900.
I have read the noob guides.
I have become completely confused.
Here's my details:
I have running the stock GB that I installed with Kies Mini some time ago.
Phone Data:
Firmware Version: 2.3.6
Baseband Version: T959VUVKJ6
Kernel Version: 2.6.35.7-T959VUVKJ6-CL694130
Build Number: GINGERBREAD.VUVKJ6
I rooted my phone with one of the one-click apps after the stock GB update so that I was at least able to overclock it and get rid of the T-Mobile bloatware, etc.
I notice that my phone reboots entirely on it's own completely randomly, has random application hangs, all the bad icky stuff that sucks... (right????)
Anyways, I've looked at some of the Custom ROMs available and I'd like to check out some of them, but I'll be quite honest, I've read the instructions for how to do it, but I'm getting extremely confused as the current instructions seem rather daunting.... It's like information overload...
Now, don't get me wrong, I'm not some kid that really doesn't know what he's doing... I'm 33 and work in IT for The Nielsen Group... so I kinda know what the heck I'm doing MOST of the time. This is something I'm unfamiliar with and am being EXTREMELY cautious about because i don't want to brick my phone....
Question time!:
1. Is there a COMPLETELY SIMPLE step-by-step process/Video Demonstration for the CORRECT method of how to put a custom rom on the SGH-T959V?
2. Does it matter that I ALREADY rooted my phone in respect to me loading a custom rom? (ie. is my already rooted phone going to have issues loading a different rom?)
3. I would like to stay with a GB based rom unless there is absolute NEED to use a Froyo based Rom - Or is this a non-point when using custom roms?
4. If i want to load a custom rom to my phone, do I need to use a specific loader? (Like, does Odin work for everything??? Loading roms and unbricking your phone? Or do I have to have different loaders for the specific roms that I want to load and try out????)
5. Please don't jump down my throat with the "read the guide" responses... I HAVE been... really. As many as I've found... and every time I read a new one, rather than feeling like I'm coming out of the darkness of knowledge and into the light of understanding the correct process for how to do this, I feel like I'm being cast deeper down the confusion pit.
Would someone KINDLY please help me. Really... I don't want to screw up this thing... I'm not worried about the warranty. From what I've read, these things are mostly fixable unless it's an actual hardware issue or if it's totally fried. I just want to do it once, do it right, move on to my next project.... Dig?
First and foremost, we keep the most updated information in the wiki:
http://forum.xda-developers.com/wiki/Samsung_Galaxy_S_4G
We've been updating it a lot lately so you're better off checking there. I'm sure you'll wanna bookmark it since you know what you're doing already.
1) Specifically you'll want to look at this section:http://forum.xda-developers.com/wiki/Samsung_Galaxy_S_4G#Installing_a_ROM
2) If you're using Odin/Heimdall you won't need to be rooted since this bypasses the phone's OS and flashes firmware directly to the phone which may or may not be pre-rooted. The only Odin 2.3.6 KJ6 rom that's out right now does NOT come with root though, it's just the stock version you're already running.
3) For our phone you're either going to use Odin/Heimdall (learn Heimdall, it's much more useful) and CWM Recovery. Most roms available right now are for CWM.
Here's the list of custom GB roms:
http://forum.xda-developers.com/wiki/Samsung_Galaxy_S_4G_ROMs
4) Honestly the forums are too cluttered and as I stated above, knowledgeable senior members are the ones who update the wiki, so that'll be your most useful resource.
If you already have some experience with computers I'll gladly help you, you're already asking the right questions.
Please use the Q&A Forum for questions Thanks
Moving to Q&A
FBis251 said:
First and foremost,
...
2) If you're using Odin/Heimdall you won't need to be rooted since this bypasses the phone's OS and flashes firmware directly to the phone which may or may not be pre-rooted. The only Odin 2.3.6 KJ6 rom that's out right now does NOT come with root though, it's just the stock version you're already running...
Click to expand...
Click to collapse
When I last played with my phone, I had used Odin on Windows... I have replaced Windows with Linux... I have installed Heimdall and did an initial test. So it is working.
My question is: Is Heimdall a valid replacement for Odin? In other words, I am wanting to use your guide, but it only refers to Odin. Can I go through those steps replacing Odin with Hamdall?
Yes it should work fine. The csc files for kc1 should be extracted over the pda files though
Sent from my SGH-T959V using XDA App
FBis251,
Thank you so much for the quick reply! I had seen it immediately after you responded, but was driving home from work and went right to bed. I'm back at the office now for the evening and perhaps may have some time to look into these tonight... I don't know as of right now.
If you are serious about the offer of some assistance, I would be more than open to it if I honestly felt it was needed. I am MORE than experiences with computers, i'm a full on uber-geek (just not with smartphones...... yet....), so VNC, etc would not be an issue.
I will most certainly get back to you about this in the next few days (perhaps even tonight). Let me see how my work load looks this evening and I will update the thread later.
Thank you again so much!
I'm usually in #teamnerd on freenode if you do IRC.
It doesn't take much to confuse me these days...
Moved my issue into a new question in the Q&A forum...
Hey, just an FYI (even tho I'm sure that ultimately you don't really care - just being realistic, not a douche... ), I haven't had a single moment to look into this beyond briefly skimming the Wiki's you linked up for me. (thanks for that one). I've had a butt-load of server issues at work that have taken a lot of my time. I'm HOPING to be able to look into some of this stuff a little deeper tonight (god willing)....
I will drop a note if I have issues....
Thanks again!
Hi everyone. i was just wondering can anyone upload the 2.3.5 stock atrix2 rom (500mb) att one on a reliable server preferably mediafire?
I cant seem to be able to find many downloads around. I have downloaded one of them but the download was constantly dropping so i dont want to flash a corrupt or incomplete download of the fxz img.
http://www.androidfilehost.com/main/Motorola_ATRIX_2_Developers/Return To stock 2.3.5/
Well thank you so much for a quick reply really appriciate it
If your on 2.3.6 make sure the script is right to return to 2.3.5
---------- Post added at 01:20 AM ---------- Previous post was at 01:08 AM ----------
I have the files and could upload if you need them
http://sbf.droid-developers.org/edison/list.php
From
http://forum.xda-developers.com/showthread.php?t=1396650
How to flash the FXZ once applying the OTA update and get back to 2.3.5, ONCE YOU UPDATE TO THE OTS 2.3.6 YOU WILL NOT BE ABLE TO FLASH THE 2.3.5 FXZ WITHOUT FOLLOWING THESE STEPS BELOW!!
NOTE: Download this file HERE -
Unzip it and move all the the items in it to the stock fxz. You might get a warning about replacing files, just click OK. NOTE that Windows might not be able to handle the size of the fxz. I have 6 GB RAM but Windows still wasn't able to perform a drag-and-drop through the fxz's zip. I recommend that you just unzip the fxz and then put the files in. (You don't have to rezip it either, RSD Lite will still recognize it and will flash faster).
Thank you eveyone for all the help,
I am on 2.3.5 and i deleted bloatware, i was gonna update but handy i saw xda first where people were haveing trouble going 2.3.6 after bloat delete.
so iam going to stock and being new to android iam going to try on flashing roms and try them out.
RaXxaa said:
Thank you eveyone for all the help,
I am on 2.3.5 and i deleted bloatware, i was gonna update but handy i saw xda first where people were haveing trouble going 2.3.6 after bloat delete.
so iam going to stock and being new to android iam going to try on flashing roms and try them out.
Click to expand...
Click to collapse
If you are new to android i highly recommend reading a lot before just jumping into something. Also before doing anything you need to always make sure you have a way to get back to stock. You have a link for the fzx so that should of been the very first thing you should of gotten ahold of before doing anything. I'm not trying to sound like a prick. Just take precautions and read first. Welcome to Android and hope you enjoy the A2.
Sent from my MB865 using xda premium
I have that and i am in some other wierd trouble and i made a thread for it, would appriciate if you can help me there.
Hey everyone.
Im generally pretty savvy with androids. I rooted and S-offed my HTC Desire, I had a nexus S for a bit until it got ran over... Now im stuck with this Galaxy S 4G, which has been nothing but headaches because for some reason... this thing is impossible to root to me. Ive tried Hemidall, Super1clicks, Odin etc..
Can someone please just point me in the direction of rooting this POS? Im hoping that once its rooted and running stock, I wont hate this thing as much... because so far, Its a horrible purchase.
I just need someone to post a link to where I need to be. Ive searched.. and im absolutely lost. Even the Rootz wiki was useless to me.
Thanks.
Model Number - SGH-T959W
Android Version 2.3.6
You might not have any luck this is the T-959V and your phone might not be supported
Sent from my SGH-T959V using xda app-developers app
http://forum.xda-developers.com/showpost.php?p=28566711&postcount=15
Read that then understand what bhundven means by DONT FLASH BOOTLOADERS!!
You can use the heimdall one clicks he created to get root access and then flash any rom that DOESNT HAVE BOOTLOADERS INCLUDED. That means do not use gremlin remover period. Once you get rooted make a backup and keep it stored in as many places as possible. If you flash the ics variants you will have to use the stock kj6 HOC and then need to flash the HOC for antonx kernel to get root back. At that point you can flash your nandroid or whatever rom you want. AGAIN AS LONG AS IT DOESNT HAVE BOOTLOADERS included.
eollie said:
http://forum.xda-developers.com/showpost.php?p=28566711&postcount=15
Read that then understand what bhundven means by DONT FLASH BOOTLOADERS!!
You can use the heimdall one clicks he created to get root access and then flash any rom that DOESNT HAVE BOOTLOADERS INCLUDED. That means do not use gremlin remover period. Once you get rooted make a backup and keep it stored in as many places as possible. If you flash the ics variants you will have to use the stock kj6 HOC and then need to flash the HOC for antonx kernel to get root back. At that point you can flash your nandroid or whatever rom you want. AGAIN AS LONG AS IT DOESNT HAVE BOOTLOADERS included.
Click to expand...
Click to collapse
I have no idea what youre talking about. Sorry
I used the Hemidall, and only got an unrooted Tmobile rom.. Im not sure where exactly i get root from this
Meh, forget it... im selling this phone. There is no convincing me to ever buy anything from Sammy again unless its a Nexus line.
HTC or Nexus forever.
Thanks guys
Reading is hard
"Can I get step by step directions please?"
Sure, here you are!
"What?! Your not going to remotely root my phone for me? F this place"
Good luck sir, you have the patience of a saint and the drive of a tiger!
OK let's be honest you gave up kinda quick.......
The forum that eollie linked you to was a forum talking about the phone that you bought, which is an apparent offshoot of the t-959v and according to what Masonite found out, "our" roms work on the t-959w but you cannot flash the bootloaders.
Here is the one click link http://forum.xda-developers.com/showthread.php?t=1358498 just boot into download mode and use this but absolutely don't flash bootloaders and it should be OK, no promises.
Eollie was right for linking you there, all the info you needed about your model phone was on that forum, that one click is in the dev sticky which everybody should read.
There has been a flood of people not researching a little bit first before posting and that's why people flamed you but you should not give up, its a good phone and our devs are dedicated and have put in a lot of time on this model, you should be happy your phone can even support all the great roms that are available.
I'm not being mean but seriously, come on, all the info is there, no need to get mad.
Sent from my cm_tenderloin using xda premium
Edit: or Google search how to use heimdall if your confused, I learn off a damn YouTube video..........
Our devs didn't create heimdall and don't support it but it is a great program and the dev has to build the individual one click for the phone, we should be happy to have it that easily available.
Reading the whole thread you got linked to is really hard. Phone-bricking hard
FBis251 said:
Reading the whole thread you got linked to is really hard. Phone-bricking hard
Click to expand...
Click to collapse
Hahaha I know but but I believe in you lmao
Sent from my cm_tenderloin using xda premium
You'll need to flash one of the back to stock files that you got linked to in that thread which will put you on stock GB with no root. DO NOT FLASH THE BOOTLOADERS. You'll very likely brick if you do.
After this download the AntonX kernel from bhundven's one click thread and flash that. That will give you a custom kernel with CWM built in and root.
Needless to say, this is all for the SGH-T959V which theoretically should work on the SGH-T959W. As you'll read any disclaimer on this forum, you're resposible for anything you flash and the damage that may occur to your device.
Thanks for that fb I forgot a few steps if he wants to be on mtd roms, I assumed he could read from that point............ but your right for knowing better
Sent from my cm_tenderloin using xda premium
Thank you very much, and I'm sorry for getting angry. I've had this phone for almost 4 months now, and haven't been able to do anything with it. Quite frustrating.
So, I currently have the Tmobile ROM on my phone, so I'm halfway there it appears!
I'm going to download the other ROM as soon as I get home.
Thanks so much! Next up.. Learning to flash with Odin, and not ROM manager.
It seemed like everything I tried wasn't working with 2.3.6. Superoneclick etc.
I was waiting for a new exploit, but it never came. I tried YouTube tutorials, text directions.. Everything would fail, or give me "read only" errors. I feared bricking, so I stopped.. But I searched the forum and came across the thread he linked me to, but it said no bootloaders, and all the ones I saw had bootloaders. Wasn't until tonight that I noticed it's a 2 part flash process, with the second being the bootloaders.
I think I started this thread at 3am.
Lesson learned.
In heimdall, you can click a little box that says "flash bootloaders" to toggle flashing them on and off! .... or maybe it was odin? I can't remember... been a while since I used them!
After being away for the weekend, I came home, and BAM... fully rooted. Amazing! and FINALLY!!!
Thanks everyone for your help...
I just have another issue.
I wanna flash this ROM http://forum.xda-developers.com/showthread.php?t=1305145
It says its CWM.. but there is a huge disclaimer that we shouldn't use ROM Manager on the development page, which is a bit confusing. Since this ROM isnt Odin flashable... what do i do?
Thanks again.
So I was confused about this when I first started. I'm not at my computer but I can help. In order to flash Roms via cmw you have to turn off your phone hold both volume rockers on the phone then hold the power button and hold till you get into cwm recovery. That will get you into cmw recovery mode. Then wipe data factory rest, from there go back to the main menu and select the install zip from sd card and find the zip file you want to flash and select it and install. Should be good to go.
Sent from my SGH-T959V using xda app-developers app
Nevermind... im a complete goon. I got it, lol.
Thanks
Hey im still learning things so please cut me some slack. After the update to ICS, my phone basically felt like a paper weight with all the bugs. so i used odin to get me back to 2.3.5 and figured i could use the ota to update to 2.3.6. well ive found out thats hit or miss. today tho it finally went thru and downloaded, however when it rebooted it went into CMW and was unable to install. now as you can figured when i checked for updates again it told me software up to date check back in 24 hours, but my software is still 2.3.5. All im looking for is the original 2.3.6.. does anyone know if i can download it and flash it through CMW somehow? I did find this link http://forum.xda-developers.com/showthread.php?t=1548750 I downloaded the one that says 2.3.6 untouched but when trying to use odin with it, it ****ed up and almost bricked my phone. Is there a noob guide for this? becasue it contained img files along with several tar files. Im just unsure how to do it correctly. Any and all help is greatly appreciated.
Go here...
Just goto this link and look through the links...
http://forum.xda-developers.com/showthread.php?t=1652398
This is all things concerning Skyrocket... Just read through it until you find what you are trying to do... search search search... read read read...study study study...then do it...
Hit like if I helped you!
gsx600r said:
Hey im still learning things so please cut me some slack. After the update to ICS, my phone basically felt like a paper weight with all the bugs. so i used odin to get me back to 2.3.5 and figured i could use the ota to update to 2.3.6. well ive found out thats hit or miss. today tho it finally went thru and downloaded, however when it rebooted it went into CMW and was unable to install. now as you can figured when i checked for updates again it told me software up to date check back in 24 hours, but my software is still 2.3.5. All im looking for is the original 2.3.6.. does anyone know if i can download it and flash it through CMW somehow? I did find this link http://forum.xda-developers.com/showthread.php?t=1548750 I downloaded the one that says 2.3.6 untouched but when trying to use odin with it, it ****ed up and almost bricked my phone. Is there a noob guide for this? becasue it contained img files along with several tar files. Im just unsure how to do it correctly. Any and all help is greatly appreciated.
Click to expand...
Click to collapse
gsx600r said:
Hey im still learning things so please cut me some slack. After the update to ICS, my phone basically felt like a paper weight with all the bugs. so i used odin to get me back to 2.3.5 and figured i could use the ota to update to 2.3.6. well ive found out thats hit or miss. today tho it finally went thru and downloaded, however when it rebooted it went into CMW and was unable to install. now as you can figured when i checked for updates again it told me software up to date check back in 24 hours, but my software is still 2.3.5. All im looking for is the original 2.3.6.. does anyone know if i can download it and flash it through CMW somehow? I did find this link http://forum.xda-developers.com/showthread.php?t=1548750 I downloaded the one that says 2.3.6 untouched but when trying to use odin with it, it ****ed up and almost bricked my phone. Is there a noob guide for this? becasue it contained img files along with several tar files. Im just unsure how to do it correctly. Any and all help is greatly appreciated.
Click to expand...
Click to collapse
if it ends with a zip u use cwm not odin, did u install cwm yet, if not goto 3rd link in my sig