Database Info

[Q] The more I read, the more confused I get

New to Android, about 3 weeks now with my Rogers 1727R. I've been trying to grab all the good files and build my understanding of returning my phone to it's stock ROM if I have to return it or if I brick it etc. But I seem to have downloaded, from this forum, so many files, with different names and files sizes, I'm confused about what does what. So I'm asking any senior people here if they can tell me what I have, what it does, and whether I need it. Here goes:
Stock_ROM_SGH-I727R-UCKJ2-k0nane.7z - Think this is a stock ROM but un-bloated. It's 257 MB.
i727_stock_kernel_odin.tar - It's 10 MB, appears to be a stock AT&T ROM, but perhaps just the kernel, not the whole ROM?
Stock Recovery.tar - It's 6.08 MB. Downloaded it today.
Nandroid backup - 841 Megs with data.ext4.tar, system.ext4.tar, boot.img and recovery.img which I thought was a complete image of my ROM.
Look at the size differences. From 6 MB up to 841 MB. What the heck are all these files?

please dont cross-post.....

I was wondering the same thing. I rooted my Skyrocket but in the instance that ICS is available before more custom roms, I may want to unroot. I can't find much information on this. Only how to root for which there is good information and tutorial videos. The size of the different recovery files seems to vary quite a bit.

You do not.need to unroot to take an ota update. You just cant delete any bloat. And gota have stock recovery..... so freeze bloat dont delete. But if you do you can always odin the stock tar

I thought when you flash ClockWorkMod (recovery.tar) that that replaces your stock recovery. Or do you still have the stock recovery just with CWM added?

Presbycusis said:
I thought when you flash ClockWorkMod (recovery.tar) that that replaces your stock recovery. Or do you still have the stock recovery just with CWM added?
Click to expand...
Click to collapse
Yes when you flash CWM you replace stock, do not take an update if you are using CWM, flash back to stock recovery first if you think you just have to have the #.#.2 instead of the #.#.1, to me its not worth it. Once I flash I don't go back to stock. The developers here are amazing.
@ harry_fine, be careful, or you are going to end up with a $200 paper weight. I know how confusing this stuff looks when you first start. Do you're research, make a plan before downloading random stuff you know nothing about. I like to play it safe. I read the posts in the developers section a few times a day for a week before I even start to flash a phone. Most all developers that post things give a very in depth description of what it is they are making available READ IT ALL, and follow directions posted. If i see something that looks interesting I just let it sit a couple days and read what people post about it. If all seems good and there are no major problems I give it a try if not ill let it pass. I have yet to brick a phone (knock on wood). I hope this helps.
BTW
Stock_ROM_SGH-I727R-UCKJ2-k0nane.7z -its a ROM, the post where you got it should tell you whats in it
i727_stock_kernel_odin.tar - this is a stock kernel, I like to think of them as drivers for you phone, install with odin
Stock Recovery.tar - this is a stock recovery you need this if you have installed CWM but want to instal an update, install with odin
Nandroid backup - this is something you should make using CWM before you start flashing a ROM just encase the ROM jacks up you phone you can reinstall

Thanks for explaining that. I am still trying to get the hang of everything myself. I read the Rooting instructions and watched several how to videos before I even considered taking the plunge. I am still a little confused about some of the terminology but I am learning by the day.
The only reason I would consider going back to stock would be if ICS is available before CM7 or CM9 on Skyrocket and then I would want to try it out.
So, if I were to flash back to "stock recovery.tar" (Does the name matter at all?) and take the update, that would would mean I was unrooted again right? Then I would undergo the same procedure to flash cwm and then Superuser?
If I use a custom kernal can that stay the same or does it need to be stock as well before installing an update or new rom?

I don't pay that much attention to the "return to stock threads" since I would never risk it for an update, even ICS, but from what I understand If you wanted to take the update you would need to put the stock recovery (name may not matter but why risk it) and stock kernel back in. You would still be rooted, and need only install CWM if you wanted to instal another ROM later. I think. If I am wrong someone will correct me, but that should be that.

Then how does one completely unroot if they wanted (or needed) to?

To unroot you odin the stock tar
---------- Post added at 05:11 PM ---------- Previous post was at 05:10 PM ----------
The stock tar in the unroot reaturn to stock fix soft brick thread. Is the factory firmware the phone comes with.....stock recovery not rooted

help would be awesome even if your help is hey dont try this agin

I tried to root through the odin method and I can get into CWM but when I install zip then reboot it stops at the SAMSUNG screen...any help will do I need my phone by tomorrow at the latest also Im with Best buy warranty so should I just break my phone and get another ?

Boot into recovety try data/cache wipe 3 times each then reboot.
---------- Post added at 03:50 PM ---------- Previous post was at 03:50 PM ----------
Also which rom are you trying to install?

What u running 2.3.5? Or 2.3.6?
IF 2.3.5 than i would unroot it and run 1click root.
GeezyF.Ladies said:
I tried to root through the odin method and I can get into CWM but when I install zip then reboot it stops at the SAMSUNG screen...any help will do I need my phone by tomorrow at the latest also Im with Best buy warranty so should I just break my phone and get another ?
Click to expand...
Click to collapse

stock one from http://forum.xda-developers.com/showthread.php?t=1340526

appdroid said:
What u running 2.3.5? Or 2.3.6?
IF 2.3.5 than i would unroot it and run 1click root.
Click to expand...
Click to collapse
2.3.6 yeah I've heard one click is awesome

Your able to get into recovery? So as i said boot into recovery wipe data/cache 3 times then reboot. If still no go flash the stock tar with odin again and reroot. You could also try just flashing the stock recovery.tar and boot into it. Then wipe data, and cache. Then reboot

silver03wrx said:
Your able to get into recovery? So as i said boot into recovery wipe data/cache 3 times then reboot. If still no go flash the stock tar with odin again and reroot. You could also try just flashing the stock recovery.tar and boot into it. Then wipe data, and cache. Then reboot
Click to expand...
Click to collapse
k tried the data/cache 3 times each and rebooted and nothing. well how do I put stock tar on my sd card if I cant get my phone on to connect with my pc storage ?

The stock tar you need to put on your pc. And you need to get your phone into download mode. You use odin on you pc with your phone in download mode. To flash the stock recovery tar. To be honest you need to just use odin to reflash the stock tar. Again. Go to the thread woth the stock tar and follow the instructions again

haha duh on my part I was just so scared that I panicked but its downloading now and im going to try and flash back to stock when it is done. thanks for your patience/help slvwrx.....upon more research I think I got a bad recovery tar bc I cant open it its just a white page with a folded corner and I think I saw someone with this problem in the thread and said you have to extract zip

any other ideas ?
anyone get tar files from another site because when I try to open mine they all say cannot open file does not seem to be a valid archive.

You cannot be serious with these questions? You don't open the tar file you put it in Odin. You really need to put some effort into researching what you are trying to do with your phone. Your lack of prior research is why you are having problems. Not trying to be an ahole but you really need to READ everything in these forums before you try to do anything to your phone or you seriously risk bricking it and not being able to recover it. It is nearly impossible to brick these phones but if you have not done the requisite research here then you will end up in essence with a brick because you have no clue how to recover it from your own mistakes. I read these forums for a solid week before I even connected my phone to my laptop and I am an IT Engineer but that doesn't make me an Android expert so I learned from the awesome people here that know more than I and are freely willing to share their knowledge. Take my word for it any/all information you would ever need to fix your phone is all right here for the reading courtesy of the great devs and enthusiasts here on the site.
Sent from my SAMSUNG-SGH-I957 using XDA App

Blackberrynomore said:
You cannot be serious with these questions? You don't open the tar file you put it in Odin. You really need to put some effort into researching what you are trying to do with your phone. Your lack of prior research is why you are having problems. Not trying to be an ahole but you really need to READ everything in these forums before you try to do anything to your phone or you seriously risk bricking it and not being able to recover it. It is nearly impossible to brick these phones but if you have not done the requisite research here then you will end up in essence with a brick because you have no clue how to recover it from your own mistakes. I read these forums for a solid week before I even connected my phone to my laptop and I am an IT Engineer but that doesn't make me an Android expert so I learned from the awesome people here that know more than I and are freely willing to share their knowledge. Take my word for it any/all information you would ever need to fix your phone is all wright here for the reading courtesy of the great devs and enthusiasts here on the site.
Sent from my SAMSUNG-SGH-I957 using XDA App
Click to expand...
Click to collapse
any criticism is good criticism to me thanks for giving me the cold hard facts and to be truthful I did jump into this early coming from an iphone 4 and all the ones before that and jailbreaking them I thought it'd be easy and it was I just 2nd guess myself all the time. my mistake was following the vid a ruebarb posted in the thread and I followed it to a T .it wasnt till he updated his video and said that his method was for ''already'' rooted users so after getting konane's stock tar flashed in odin I was back to stock re-did the 2.3.6 method got it done stayed stock rooted for 2 days then just about 30 mins ago I went head and jumped on RED SONIA!
again thanks for your input and to care enough to set a noob stright
also Cdshep pretty much found the problem after having a personal chat with me he saw what I was trying to say I'm just not really good with wording or spelling I just recently winged myself of of concerta(ADHD pills) and so my mind moves faster than I can type or right and I confuse myself but its better than the life of a zombie!

[Q] Can somebody upload cat'd mbmloader.bin from dev/block folder from their 2.3.6?

As i softbricked few days ago i tried to flash FXZ but continuously received error at step 3 in RSD flashing mbmloader.bin.
After a little research i found that the mbmloader.bin provided in fxz is for 2.3.5 and the binaries gets modified during update to 2.3.6.
So to get back from 2.3.6 to 2.3.5 you must have mbmloder.bin of 2.3.6
Also i found that if someone has working phone then partitions like recovery,boot,mbmloader.bin can be cat'd from phone.
I don't know the process of cat'd
So if someone uploads the mbmloder.bin from their 2.3.6 then i can make FXZ which can recover from any type of BOOTLOOP.
MOD EDIT: Please note duplicate posts are frowned upon. General post deleted, as you will get more response in this forum where people know what you're talking about.

Are you trying this: forum.xda-developers.com/attachment.php?attachmentid=887221&d=1328375358
From beginners guide:
Unzip it and move all the the items in it to the stock fxz. You might get a warning about replacing files, just click OK. NOTE that Windows might not be able to handle the size of the fxz. I have 6 GB RAM but Windows still wasn't able to perform a drag-and-drop through the fxz's zip. I recommend that you just unzip the fxz and then put the files in. (You don't have to rezip it either, RSD Lite will still recognize it and will flash faster).
You should be able to use RSD Lite to flash the file.
Sent from my MB865 using XDA

Moving to General
Cheers

2.3.6 help

Hey im still learning things so please cut me some slack. After the update to ICS, my phone basically felt like a paper weight with all the bugs. so i used odin to get me back to 2.3.5 and figured i could use the ota to update to 2.3.6. well ive found out thats hit or miss. today tho it finally went thru and downloaded, however when it rebooted it went into CMW and was unable to install. now as you can figured when i checked for updates again it told me software up to date check back in 24 hours, but my software is still 2.3.5. All im looking for is the original 2.3.6.. does anyone know if i can download it and flash it through CMW somehow? I did find this link http://forum.xda-developers.com/showthread.php?t=1548750 I downloaded the one that says 2.3.6 untouched but when trying to use odin with it, it ****ed up and almost bricked my phone. Is there a noob guide for this? becasue it contained img files along with several tar files. Im just unsure how to do it correctly. Any and all help is greatly appreciated.

Go here...
Just goto this link and look through the links...
http://forum.xda-developers.com/showthread.php?t=1652398
This is all things concerning Skyrocket... Just read through it until you find what you are trying to do... search search search... read read read...study study study...then do it...
Hit like if I helped you!
gsx600r said:
Hey im still learning things so please cut me some slack. After the update to ICS, my phone basically felt like a paper weight with all the bugs. so i used odin to get me back to 2.3.5 and figured i could use the ota to update to 2.3.6. well ive found out thats hit or miss. today tho it finally went thru and downloaded, however when it rebooted it went into CMW and was unable to install. now as you can figured when i checked for updates again it told me software up to date check back in 24 hours, but my software is still 2.3.5. All im looking for is the original 2.3.6.. does anyone know if i can download it and flash it through CMW somehow? I did find this link http://forum.xda-developers.com/showthread.php?t=1548750 I downloaded the one that says 2.3.6 untouched but when trying to use odin with it, it ****ed up and almost bricked my phone. Is there a noob guide for this? becasue it contained img files along with several tar files. Im just unsure how to do it correctly. Any and all help is greatly appreciated.
Click to expand...
Click to collapse

gsx600r said:
Hey im still learning things so please cut me some slack. After the update to ICS, my phone basically felt like a paper weight with all the bugs. so i used odin to get me back to 2.3.5 and figured i could use the ota to update to 2.3.6. well ive found out thats hit or miss. today tho it finally went thru and downloaded, however when it rebooted it went into CMW and was unable to install. now as you can figured when i checked for updates again it told me software up to date check back in 24 hours, but my software is still 2.3.5. All im looking for is the original 2.3.6.. does anyone know if i can download it and flash it through CMW somehow? I did find this link http://forum.xda-developers.com/showthread.php?t=1548750 I downloaded the one that says 2.3.6 untouched but when trying to use odin with it, it ****ed up and almost bricked my phone. Is there a noob guide for this? becasue it contained img files along with several tar files. Im just unsure how to do it correctly. Any and all help is greatly appreciated.
Click to expand...
Click to collapse
if it ends with a zip u use cwm not odin, did u install cwm yet, if not goto 3rd link in my sig

Updating from ROOTED 2.3.6 To ICE,,, HOW?

Hello everyone,
Would anyone help me please to direct me to a thread or instruction where I can update my rooted device from 2.3.6 to ice. I tried to do it thought wifi but it didn't work. I heard that I have to downgrade to 2.3.5 then update it to ice. I tried to go back to 2.3.5 but I couldn't "install aborted". As of now, I reset my phone and do not know what to do.
Any help is appreciated.
Thanks

GueSs_me said:
Hello everyone,
Would anyone help me please to direct me to a thread or instruction where I can update my rooted device from 2.3.6 to ice. I tried to do it thought wifi but it didn't work. I heard that I have to downgrade to 2.3.5 then update it to ice. I tried to go back to 2.3.5 but I couldn't "install aborted". As of now, I reset my phone and do not know what to do.
Any help is appreciated.
Thanks
Click to expand...
Click to collapse
Refer noob guide under general section on how to use rsd lite..flash to stock using rsdlite and update over wifi
Sent from my MB865 using xda app-developers app

If you took some time to read you wouldnt haveto waste a post....
This page will get u onto leak one.... the only version of ics u can go back to gb from..... follow the directions.... and u MUST be on 2.3.6 and i recomend a fresh install of 2.3.6....
Here is the link.... read the op and you will have all the info u need....
http://forum.xda-developers.com/showthread.php?t=1779968
Sent from my MB865 using xda app-developers app

daavvis said:
If you took some time to read you wouldnt haveto waste a post....
This page will get u onto leak one.... the only version of ics u can go back to gb from..... follow the directions.... and u MUST be on 2.3.6 and i recomend a fresh install of 2.3.6....
Here is the link.... read the op and you will have all the info u need....
http://forum.xda-developers.com/showthread.php?t=1779968
Sent from my MB865 using xda app-developers app
Click to expand...
Click to collapse
Thanks for your response. I went thought this thread before you provided and I followed the instruction but the installation aborted. So, I though that I was in the wrong thread. I spent two days trying to flash my device but I couldn't. That is way I need some help and guidance!!!
Thanks again,

GueSs_me said:
Thanks for your response. I went thought this thread before you provided and I followed the instruction but the installation aborted. So, I though that I was in the wrong thread. I spent two days trying to flash my device but I couldn't. That is way I need some help and guidance!!!
Thanks again,
Click to expand...
Click to collapse
I need a whole lot more information to help you out.
1) What was the EXACT error you got.
2) Did you actually fxz to 2.3.6, before attempting to apply the blur zip file?
3) Did you try and root or restore anything before trying to apply the blur zip file, including signing into goolge?
4) Did you install ANY CWM bootstrap or the like, before trying to apply the blur zip file?
I would fxz to 2.3.6 and try again to apply the Blur zip file, and this time, please capture the error message with as much detail as possible, so that I know what to tell you to do next. Also next time please post this in my leak #1 thread, instead of a new one, thanks.

jimbridgman said:
I need a whole lot more information to help you out.
1) What was the EXACT error you got.
2) Did you actually fxz to 2.3.6, before attempting to apply the blur zip file?
3) Did you try and root or restore anything before trying to apply the blur zip file, including signing into goolge?
4) Did you install ANY CWM bootstrap or the like, before trying to apply the blur zip file?
I would fxz to 2.3.6 and try again to apply the Blur zip file, and this time, please capture the error message with as much detail as possible, so that I know what to tell you to do next. Also next time please post this in my leak #1 thread, instead of a new one, thanks.
Click to expand...
Click to collapse
Here is an attached screenshot for the error I got. I was in 2.3.5 then I root my device and flash to 2.3.6, so I am using 2.3.6. I reset my device and tried to flash the Blur zip but I couldn't. I am using Atrix 2 Bootstrapper. hope this help! Thanks again for your time.

GueSs_me said:
Here is an attached screenshot for the error I got. I was in 2.3.5 then I root my device and flash to 2.3.6, so I am using 2.3.6. I reset my device and tried to flash the Blur zip but I couldn't. I am using Atrix 2 Bootstrapper. hope this help! Thanks again for your time.
Click to expand...
Click to collapse
Yeah you can not just do a factory reset. You HAVE to fxz back to 2.3.6 from scratch, even if you are already on 2.3.6. Go grab the 2.3.6 fxz and flash that with RSD lite, then try again. It is real important that you flash the fxz and the do nothing, not even sign into google, or install ANYTHING, before trying to update with the zip file. I see that your build.prop was the issue in your error, that tells me you did not fxz, and you MUST do that.
Oh and By the way you can get the 2.3.6 FXZ from here:
http://sbf.droid-developers.org/edison/list.php
And this is the file you want, if you are on AT&T:
InlineFlashing_Edison_67.21.125_CFC_P3_APBP.xml.zip

jimbridgman said:
Yeah you can not just do a factory reset. You HAVE to fxz back to 2.3.6 from scratch, even if you are already on 2.3.6. Go grab the 2.3.6 fxz and flash that with RSD lite, then try again. It is real important that you flash the fxz and the do nothing, not even sign into google, or install ANYTHING, before trying to update with the zip file. I see that your build.prop was the issue in your error, that tells me you did not fxz, and you MUST do that.
Oh and By the way you can get the 2.3.6 FXZ from here:
http://sbf.droid-developers.org/edison/list.php
And this is the file you want, if you are on AT&T:
InlineFlashing_Edison_67.21.125_CFC_P3_APBP.xml.zip
Click to expand...
Click to collapse
Thank you so much, if you don't mind, I will update you when I finish doing what you recommended.

Ok, now I did use the RSD lite to go back to the fxz 2.3.6. All the process went will and I got the PASS under the status. When the device started I notice that I am in ICE not 2.3.6!! so do I have to do the next step in this thread ??
http://forum.xda-developers.com/show....php?t=1779968

GueSs_me said:
Ok, now I did use the RSD lite to go back to the fxz 2.3.6. All the process went will and I got the PASS under the status. When the device started I notice that I am in ICE not 2.3.6!! so do I have to do the next step in this thread ??
http://forum.xda-developers.com/show....php?t=1779968
Click to expand...
Click to collapse
No. You are on ICS now the same version as the ota, which by the way is no longer off limits sine we have an ICS fxz, as you just witnessed. You can use the root from thread though, if you want root.

jimbridgman said:
No. You are on ICS now the same version as the ota, which by the way is no longer off limits sine we have an ICS fxz, as you just witnessed. You can use the root from thread though, if you want root.
Click to expand...
Click to collapse
Thank you soooo much for your kind help and your time as well.

Do any of the sr contributors ever read what they post in NOOB sections or procedures
I see many SR responders that I can guess just live and make a living off of modifying and changing android system. Problem is that unless you do things everyday. Many of the abbreviations and shortening of terms is the cause of many of the questions us part time modify-er of phones ask.
But unless you do it everyday. Simple for many but many tasks have to be reviewed and gone over again and re-read. Many modify and then only do it again when they get tired or have a new phone. Many of us have some of the same desires and likes but don't have the time or inclination to do it fulltime or live for programming and Modifying. Were users. We don't like the stock bloats and addons that we get with stock phones.
Simple example is going from 2.3.6 operating version to 4.04. Have a thread [HOW TO] get your AT&T phone onto ICS Leak #1 - Process Updated 11/11/2012.
Simple questions such as ON GB or figuring out if my phone modifying OR I have put Leak 1 or 2 on my phone. or ICS OTA. just figuring out what a leak meant was a task.
With my Atrix2 I went from 2.3.5 to root to 2.3.6 with a modified ROM. So back tracking and knowing if I'm in ICS of 2.3.6 or a modified version . That won't work. By reading it seems to be that to go to 4.04 you need to be in stock ATT FXZ by using the RSD lite. Then get the new 4.04 over the air (OTA)
Then you have a stock 4.04 . You then can go do the root zip. Then load titimium backup and reload all of your apps and settings.
But read how your write your procedures. Probably get half as many questions if most of the links work. Example try to find RSD Lite 6.0 link.
You then add into all of this mix different phones, MFG's. etc. Example Atrix is almost in 3 different versions.
Also all the crap that is added to the end of post. Half the time there is more adds and quips and comments that get added and added to each response. That slows the reading from what is important to glaze over at the added 4 inches of not need to know.
Not a pretty picture. Sure many don't read more then one or two links. But doesn't help when you send a read and you'll find the answer. Just either answer or don't respond.
How you abbreviate the answer is only going to make part timers ask the same question time after time. It's nice sharing information. But just make a SR section if you don't want us to ask questions. That have been asked - and asked-

537magspc said:
I see many SR responders that I can guess just live and make a living off of modifying and changing android system. Problem is that unless you do things everyday. Many of the abbreviations and shortening of terms is the cause of many of the questions us part time modify-er of phones ask.
But unless you do it everyday. Simple for many but many tasks have to be reviewed and gone over again and re-read. Many modify and then only do it again when they get tired or have a new phone. Many of us have some of the same desires and likes but don't have the time or inclination to do it fulltime or live for programming and Modifying. Were users. We don't like the stock bloats and addons that we get with stock phones.
Simple example is going from 2.3.6 operating version to 4.04. Have a thread [HOW TO] get your AT&T phone onto ICS Leak #1 - Process Updated 11/11/2012.
Simple questions such as ON GB or figuring out if my phone modifying OR I have put Leak 1 or 2 on my phone. or ICS OTA. just figuring out what a leak meant was a task.
With my Atrix2 I went from 2.3.5 to root to 2.3.6 with a modified ROM. So back tracking and knowing if I'm in ICS of 2.3.6 or a modified version . That won't work. By reading it seems to be that to go to 4.04 you need to be in stock ATT FXZ by using the RSD lite. Then get the new 4.04 over the air (OTA)
Then you have a stock 4.04 . You then can go do the root zip. Then load titimium backup and reload all of your apps and settings.
But read how your write your procedures. Probably get half as many questions if most of the links work. Example try to find RSD Lite 6.0 link.
You then add into all of this mix different phones, MFG's. etc. Example Atrix is almost in 3 different versions.
Also all the crap that is added to the end of post. Half the time there is more adds and quips and comments that get added and added to each response. That slows the reading from what is important to glaze over at the added 4 inches of not need to know.
Not a pretty picture. Sure many don't read more then one or two links. But doesn't help when you send a read and you'll find the answer. Just either answer or don't respond.
How you abbreviate the answer is only going to make part timers ask the same question time after time. It's nice sharing information. But just make a SR section if you don't want us to ask questions. That have been asked - and asked-
Click to expand...
Click to collapse
Where did this come from? And what did this have to do with the OP's question?
You just screwed yourself by doing to the OP what you claimed is an issue with:
537magspc said:
Also all the crap that is added to the end of post. Half the time there is more adds and quips and comments that get added and added to each response. That slows the reading from what is important to glaze over at the added 4 inches of not need to know
Click to expand...
Click to collapse
Now if you have something to post to help the OP, even though this has been solved, then spit it out. If you have a question then ask it, otherwise go post elsewhere, as this post was utter crap and disrespectful to all of the people in the Atrix2 forum.
--EDIT--
Yeah I get one thing you were complaining about was peoples signatures, but too bad. People have every right to put whatever they want in their signature, and it does not need to have anything to do with anything, and sure does not need to even be related to android. I am guessing that your work e-mail signature is boring and dry and just has your name and title... Mine at work actually lists all my certifications in binary, so... Again if you do not like it, go someplace else.
Yeah I am being harsh, but for your 5th post total and, looking at the other junk you have posted you are not off to a good start. Stop whining and grow up, and read, read, and oh yeah read EVERYTHING again, you might actually learn something. If you do not understand an acronym, then ask what that means. I would rather have someone ask what is an FXZ or what is RSD lite and how do I get it, than having someone complain about it, in the insulting way that you have.
Oh and one last thing, ALL of us in here do this for free in our free time, and are not "pros" as you so insinuated, so you might also think about that the next time you post.