Database Info

Xperia L clockworkmod recovery ?

I can't seems to find xperia L clockworkmod recovery. Any idea where can i get it ?

ongwenhongjames said:
I can't seems to find xperia L clockworkmod recovery. Any idea where can i get it ?
Click to expand...
Click to collapse
Wrong section...Ask in Q&A....:good:

ongwenhongjames said:
I can't seems to find xperia L clockworkmod recovery. Any idea where can i get it ?
Click to expand...
Click to collapse
There is a vengeance kernel which have both CWM and TWRP recovery...flash it and you got it..
Sent from my C2105 using xda app-developers app

noob confusion
karkand said:
There is a vengeance kernel which have both CWM and TWRP recovery
Click to expand...
Click to collapse
When you say "which have both CWM & TWRP " I dont get the ides - WHen you flash only the kernel, how is CWM/TWRP showing up ? They are supposed to be residing in the Recovery partition, right ? We flash kernel into the System parition, isnt it ?
Suppose if "hotboot" the kernel without flashing it. Will I have access to CWM ?

jayaura said:
When you say "which have both CWM & TWRP " I dont get the ides - WHen you flash only the kernel, how is CWM/TWRP showing up ? They are supposed to be residing in the Recovery partition, right ? We flash kernel into the System parition, isnt it ?
Suppose if "hotboot" the kernel without flashing it. Will I have access to CWM ?
Click to expand...
Click to collapse
see for complete guide here http://forum.xda-developers.com/showthread.php?t=2322726
and how to get to CWM just reboot,,and at Sony logo,,it will be an Amber light on led then press vol button repeatly..just it..

CWM for lock bootloader xL
Anyone here can help me to have CWM for lock bootloader?

赤い蝶 said:
Anyone here can help me to have CWM for lock bootloader?
Click to expand...
Click to collapse
It is impossible. You have to unlock bootloader
Sent from my C2105 using xda premium

allenwalker1998 said:
It is impossible. You have to unlock bootloader
Sent from my C2105 using xda premium
Click to expand...
Click to collapse
It is possible dude (if you remember xparts) but cant find that for xperia l. Xparts shows device not supported. I wish nAl will work upon it because as by my knowledge, the first recovery for locked bootloader was put by him only

shivamcheat said:
It is possible dude (if you remember xparts) but cant find that for xperia l. Xparts shows device not supported. I wish nAl will work upon it because as by my knowledge, the first recovery for locked bootloader was put by him only
Click to expand...
Click to collapse
Yes. It's possible to load a recovery during boot. We just have to patch a script/binary which gets executed during boot. For example /system/bin/charger or /system/etc/install-recovery.sh
But there are two problems with stock kernel :-
1. In 3.4 kernel for FWVGA devices, video driver (msm_fb.c), needs to be patched for fixing frame buffers. Otherwise graphics show up messed in recoveries.
2. There's also an issue of reserved fields which block cwm start-up. Though twrp boots fine but with graphic glitches due to 1.
So best I can do is to make twrp for locked BL. Though it'll be almost unusable due to graphic glitches.
I hope, you understand my problem here.
Sent from my C2104 using xda app-developers app

Rachit Rawat said:
Yes. It's possible to load a recovery during boot. We just have to patch a script/binary which gets executed during boot. For example /system/bin/charger or /system/etc/install-recovery.sh
But there are two problems with stock kernel :-
1. In 3.4 kernel for FWVGA devices, video driver (msm_fb.c), needs to be patched for fixing frame buffers. Otherwise graphics show up messed in recoveries.
2. There's also an issue of reserved fields which block cwm start-up. Though twrp boots fine but with graphic glitches due to 1.
So best I can do is to make twrp for locked BL. Though it'll be almost unusable due to graphic glitches.
I hope, you understand my problem here.
Sent from my C2104 using xda app-developers app
Click to expand...
Click to collapse
Cant you port from xperia z's recovery ?
I tried to install the twrp provided for Z on locked bootloader but not worked for our device. When I take a look on installation script, it pushes charger files to system/bin but our charger file is located on root folder. I dont have recovey so didn't tried to push Z's files on our device at correct location as i'm afraid of bootloop.
If porting of Z's recovery can't be done, please make twrp for our devices ignoring the graphic issues. atleast we will have the recovery.
and i would like to make you know if you don't that or device has CWM pre installed but with restrictions. so may be looking more into system files may make CWM possible
Thanks for taking me in consideration.
Best regards..

something is wrong
karkand said:
see for complete guide here http://forum.xda-developers.com/showthread.php?t=2322726
and how to get to CWM just reboot,,and at Sony logo,,it will be an Amber light on led then press vol button repeatly..just it..
Click to expand...
Click to collapse
i try to flash with flashtool boot.img from taoshan which says is with recovery and twrm, but unfortunately i got this error
3:11 - INFO - Device connected in fastboot mode
13/003/2013 23:03:21 - INFO - Please wait device is rebooting into fastboot mode (via Fastboot)
13/003/2013 23:03:21 - INFO - Device will soon reboot back into fastboot mode
13/003/2013 23:03:21 - INFO - Device disconnected
13/003/2013 23:03:23 - INFO - Device connected in fastboot mode
13/003/2013 23:03:31 - INFO - Selected kernel (boot.img or kernel.sin): C:\Users\Nicholas\Downloads\Extended_Stock_Kernel _TaoShan_v2\boot.img
13/003/2013 23:03:31 - INFO - Flashing selected kernel
13/003/2013 23:03:31 - INFO - sending 'boot' (9212 KB)...
13/003/2013 23:03:31 - INFO - OKAY [ 0.302s]
13/003/2013 23:03:31 - INFO - writing 'boot'...
13/003/2013 23:03:31 - INFO - FAILED (remote: Command not allowed)
can i know what i am doing wrong, or what i can do to succeed in flashing this kernel?

@hellspawn
Hi! You need to unlock your bootloader See it in the service menu, that it is allowed or not. If not, like me, you're not lucky -yet, if it says allowed, then there is a tutorial in the forum how to do this!

can somebody tell me where to download CWM recovery for Xperia l? I'm currently running 4.2.2 stock and want to install cm11.i tried with CWM version 6.0.3.x,it have graphics glitch in recovery mode.i still tired to flash rom but aborted with status 7 error.my phone is rooted and bootloader unlocked.thanks

there does exist Cwm for locked bootloader and it works too. Not very good but enough to flash zips.
Head over to developement thread and you will find it.

abhi007.john said:
there does exist Cwm for locked bootloader and it works too. Not very good but enough to flash zips.
Head over to developement thread and you will find it.
Click to expand...
Click to collapse
I've been searching all day.can't find the thread and download link.i do have a cwm recovery version 6.0.x.x by Tz i don't remember the numbers but it's not working..please post a mirror download link

[Q] Could Somebody Compile TWRP or CWM for SM-G360F please?

any help would be much appreciated i attach my recovery.img boot.img and recovery.fstab zipped, thanks in advance

finch69 said:
any help would be much appreciated i attach my recovery.img boot.img and recovery.fstab zipped, thanks in advance
Click to expand...
Click to collapse
Thank to you I repaired my PHONE THX DUDE

I take it u needed the stock files my friend, im glad i helped

finch69 said:
any help would be much appreciated i attach my recovery.img boot.img and recovery.fstab zipped, thanks in advance
Click to expand...
Click to collapse
people can use the cwm recovery for the G360H to create an for G360F, the product are similar only 4G not present on the 360H. caution because i see the recovery arent on /dev/block/mmcblk0p21 but on /dev/block/mmcblk0p17.
ps: i try to flash recovery from G360H and cant go to recovery.

Anyone has CWM or TWRP compiled for SM-G360H?

9999 hours in linux
Not sure if it works, I don't have the phone ( I will in 1 week or so, but not sure if the LTE or non-LTE)
anyways this is for G360F
and I compiled it with -eng, so maybe there is more debug output..
Also I don't know the GPIO key values so I don't think you will be able to move through the menu.. I only want to know if its bootable.
zip is not flashable
Edited, not bootable
Look at the latest post, new image!!

Is the recovery tested?

nagalun said:
9999 hours in linux
Not sure if it works, I don't have the phone ( I will in 1 week or so, but not sure if the LTE or non-LTE)
anyways this is for G360F
and I compiled it with -eng, so maybe there is more debug output..
Also I don't know the GPIO key values so I don't think you will be able to move through the menu.. I only want to know if its bootable.
zip is not flashable
Click to expand...
Click to collapse
it's not bootable

gabi4175601 said:
it's not bootable
Click to expand...
Click to collapse
Thanks for telling me, does the screen flash white for a moment?
or does ADB work?

nagalun said:
Thanks for telling me, does the screen flash white for a moment?
or does ADB work?
Click to expand...
Click to collapse
the phone goes to download mode, SYSTEM COULD NOT BOOT, apears before knox info. no adb, only kies v3 recognized the phone and reflashed

gabi4175601 said:
the phone goes to download mode, SYSTEM COULD NOT BOOT, apears before knox info. no adb, only kies v3 recognized the phone and reflashed
Click to expand...
Click to collapse
Would you be willing to test one or two img's for me?
If you want we can talk via pm or I can post them here.

nagalun said:
Would you be willing to test one or two img's for me?
If you want we can talk via pm or I can post them here.
Click to expand...
Click to collapse
ok i will test them but on saturday

gabi4175601 said:
ok i will test them but on saturday
Click to expand...
Click to collapse
I think I know what's the issue now. Just one more test,
attached are two recoveries, both are TWRP, one is using the stock kernel that the default recovery uses and the other is my compiled kernel.
Try both and please tell me if it works or not.
Try using adb if the phone doesn't restart or the touch screen doesn't work in TWRP
Also everyone can try it, go ahead.
And another thing, I used the kernel from the recovery.img of the OP.
Edit: Look at my second post for the recoveries..

nagalun said:
I think I know what's the issue now. Just one more test,
attached are two recoveries, both are TWRP, one is using the stock kernel that the default recovery uses and the other is my compiled kernel.
Try both and please tell me if it works or not.
Try using adb if the phone doesn't restart or the touch screen doesn't work in TWRP
Also everyone can try it, go ahead.
And another thing, I used the kernel from the recovery.img of the OP.
Click to expand...
Click to collapse
can i flash them with odin?

gabi4175601 said:
can i flash them with odin?
Click to expand...
Click to collapse
Yes, but I derped something, recovery.fstab is from CWM.. I'll edit this post when its ready and then download it again
EDIT: flash this, twrp fstab in this one
EDIT2: nope

nagalun said:
Yes, but I derped something, recovery.fstab is from CWM.. I'll edit this post when its ready and then download it again
Click to expand...
Click to collapse
ok, i will try them when you post them

gabi4175601 said:
ok, i will try them when you post them
Click to expand...
Click to collapse
Just posted the recovery up there.

nagalun said:
Just posted the recovery up there.
Click to expand...
Click to collapse
after flash the phone booted ok. then i have restarted in recovery mode got the same error and the phone didn't boot in nomal mode after restart had to flash the rom to recover

gabi4175601 said:
after flash the phone booted ok. then i have restarted in recovery mode got the same error and the phone didn't boot in nomal mode after restart had to flash the rom to recover
Click to expand...
Click to collapse
The thing that bothers me is that the error is very generic and doesn't explain anything, it has to be something related to knox. You downloaded the one in this post, right?
nagalun said:
Yes, but I derped something, recovery.fstab is from CWM.. I'll edit this post when its ready and then download it again
EDIT: flash this, twrp fstab in this one
Click to expand...
Click to collapse

nagalun said:
The thing that bothers me is that the error is very generic and doesn't explain anything, it has to be something related to knox. You downloaded the one in this post, right?
Click to expand...
Click to collapse
yes i downloaded the right one, i think the knox is integrated in the recovery or in the boot.img. this is the grand prime twrp recovery forum it has the same spec only the display is different 5 inch compared to 4.5 on core prime. http://forum.xda-developers.com/grand-prime/development/share-twrp-2-8-4-0-galaxy-prime-t3064506

[Q] CWM Recovery for Lenovo B8000-H

Could someone give me a working cwm recovery?

Arkonite said:
Could someone give me a working cwm recovery?
Click to expand...
Click to collapse
It seems no one has created a CWM for your phone.
You can create it on your own.
Check here: How to make CWM recovery
You can get scatter file and boot.img from the stock ROM here: http://13freak.blogspot.in/2014/12/lenovo-yoga-b8000-h-3g-100-firmware.html

GokulNC said:
It seems no one has created a CWM for your phone.
You can create it on your own.
Check here: How to make CWM recovery
You can get scatter file and boot.img from the stock ROM here: http://13freak.blogspot.in/2014/12/lenovo-yoga-b8000-h-3g-100-firmware.html
Click to expand...
Click to collapse
Thanks for the tutorial but it said flashing on unrooted phone so will it work even if my phone is rooted?:good:

Arkonite said:
Thanks for the tutorial but it said flashing on unrooted phone so will it work even if my phone is rooted?:good:
Click to expand...
Click to collapse
Of course yes

GokulNC said:
Of course yes
Click to expand...
Click to collapse
By the way he is using mt6595 mine is mt8389 so can I still do it?
I'm worried that I may brick my device so I'm being careful. Thanks for the immediate response.

Arkonite said:
By the way he is using mt6595 mine is mt8389 so can I still do it?
I'm worried that I may brick my device so I'm being careful. Thanks for the immediate response.
Click to expand...
Click to collapse
Yes, most MTK devices will work for that.
If you're afraid it will brick the phone, you can do this:
Follow the steps from there until recovery image (.img file) is created.
Then boot into Fastboot mode (Google it if u don't knkno
then using ADB, execute this command:
Code:
fastboot boot pathname/recovery_name.img
(Where pathname is the directory where recovery is present with name recovery_name.img)
Better rename it as recovery.img and place in C:\ and use it like this:
fastboot boot C:\recovery.img
If it boots and CWM recovery shows up, then you can flash it
U can also use it directly by this way by booting

[TESTING][ROM][7.1.2] CM14.1 for janice [TESTERS NEEDED]

02/22 Update: Project temporarily on hold until March due to school.
03/19 Update: I'm back.
03/27 Update: It booted
Hi S Advance Community! I don't own this device but I compiled CM14.1 and I need testers who know how to logcat, use odin to reflash boot image, etc.
THIS BUILD IS TOTALLY UNTESTED (i don't have an s advance)!!! AS A RESULT, RECOVERY MODE MIGHT NOT WORK AFTER FLASHING THIS ROM AND YOU'LL NEED TO FLASH STOCK ROM USING ODIN IF THAT HAPPENS!
I just need info if it boots or not, and logcat/last_kmsg if it doesn't.
Link of rom (for advanced users only)
YOU AGREE TO NOT KILL ME FOR ANYTHING THAT HAPENS TO YOUR PHONE!
https://www.androidfilehost.com/?fid=745425885120695238 (again, FLASH AT YOUR OWN RISK)
Kernel Source (for GPL Compliance)
EDIT: Use this guide on how to make a logcat/last_kmsg dump when the ROM doesn't boot if you don't know how to (no need to flash the zip on that thread as this rom is an eng build already).
EDIT #2: ROM doesn't boot so I need the /proc/last_kmsg file obtainable from recovery after a failed boot.

Thanks! Downloading it ?

I'm waiting for feedback from the already downloaded it. If successful, please share some screenshots. Thanks in advance guys.

No-Lags said:
I'm waiting for feedback from the already downloaded it. If successful, please share some screenshots. Thanks in advance guys.
Click to expand...
Click to collapse
Sure

Hello the installation was a success, but when he went to the screen from Samsung he stayed frozen in it.

GabrielR52 said:
Hello the installation was a success, but when he went to the screen from Samsung he stayed frozen in it.
Click to expand...
Click to collapse
Thanks for testing! While the phone is stuck on the samsung logo, can you press the 3 button combo for recovery for 10+ seconds (without pulling the battery before) until the phone boots to recovery and copy /proc/last_kmsg to sdcard using recovery then upload it here? I need to see the kernel logs if it's an init related issue or a library related one.

Yea ! The installation was a success but it didn't boot...Stuck On the splash screen...I will flash it again and will let you know the kernal logs and stuff.....Thanks For your support for Janice

I will send tomorrow because today i haven't had the time, so that the last time I installed this android even holding the 3 keys to enter the recovery mode the cell phone was stopped on the logo of samsung, would have some other way of copying the /proc/last_kmsg ? But tomorrow i will install again and I'll see if i go into recovery, sorry my english if it is bad is that i am from Brazil

On Codina must be enabled SELINUX with boot parameter - 1 and cmdline=selinux.bootmode=permissive to boot up Nougat. For MM this wasn't needed.

Can someone try flashing this boot.img to see if the rom will boot?
https://drive.google.com/open?id=0Bw4AfK_vJ7JycWV4TmlOeldzWkE

3liteking148 said:
Can someone try flashing this boot.img to see if the rom will boot?
https://drive.google.com/open?id=0Bw4AfK_vJ7JycWV4TmlOeldzWkE
Click to expand...
Click to collapse
After flashing the rom do i have to flash it with recovery?

Tech x 125 said:
After flashing the rom do i have to flash it with recovery?
Click to expand...
Click to collapse
Flash it with TWRP (because twrp can flash images since 3.0)

Rom isn't boot. I'm using Phiz-touch
After flash not work recovery

psycrow17 said:
Rom isn't boot. I'm using Phiz-touch
After flash not work recovery
Click to expand...
Click to collapse
Thanks for reporting! No wonder why no one's giving me logs so I'm gonna make an odin flashable boot.img later with working recovery from some rom.

Hi guys! This is the just the odin-flashable tar of the boot image of PolishVodka's CM14.1 as recovery was said to work there.
https://drive.google.com/open?id=0Bw4AfK_vJ7JycVBST3pwS18tdms

Can I expect the recovery has been immersed in a new build? Maybe I'll try for it.

3liteking148 said:
Hi guys! This is the just the odin-flashable tar of the boot image of PolishVodka's CM14.1 as recovery was said to work there.
https://drive.google.com/open?id=0Bw4AfK_vJ7JycVBST3pwS18tdms
Click to expand...
Click to collapse
You know we have kernel + ramdisk + recovery on the same partition (initramfs)?
And here you'll see how this working:
https://github.com/Epirex/Samsung_STE_Kernel/blob/marshmallow/usr/u8500_initramfs.list

PolishVodka said:
You know we have kernel + ramdisk + recovery on the same partition (initramfs)?
And here you'll see how this working:
https://github.com/Epirex/Samsung_STE_Kernel/blob/marshmallow/usr/u8500_initramfs.list
Click to expand...
Click to collapse
Yeah I know about that partitioning layout but how should i name the initramfs for flashing in odin?
Edit: nvm about that i got what you're saying that there's something wrong about my initramfs. Thanks for the info

I could not install this new boot.img by Odin and cannot seem to get the log by logcat by that of a mistake "/sbin/sh: exec: line 1: logcat: not found"

????

need help unbrick oreo

hi @ante0
i just tried to do a full unroot through supersu...
and now i cant boot -.-
error mode
attention
please update system again
error!
func no : 10 (boot image)
error no : 2 (load failed)

ezraiil1 said:
hi @ante0
i just tried to do a full unroot through supersu...
and now i cant boot -.-
error mode
attention
please update system again
error!
func no : 10 (boot image)
error no : 2 (load failed)
Click to expand...
Click to collapse
PROBLEM SOLVED!
had to extract and flash kernel manually.

Download this: https://mega.nz/#!kGZEjZSQ!iLAW0onaLACrG5v7BCYZUVH6WMO1ued8PWWcpMTY6Fs
Boot to fastboot mode.
Extract bootoreo.zip:
fastboot flash kernel KERNEL.IMG
fastboot flash ramdisk RAMDISK.IMG
See if that helps.
Edit: I was too late. Oh well

ante0 said:
Download this: https://mega.nz/#!kGZEjZSQ!iLAW0onaLACrG5v7BCYZUVH6WMO1ued8PWWcpMTY6Fs
Boot to fastboot mode.
Extract bootoreo.zip:
fastboot flash kernel KERNEL.IMG
fastboot flash ramdisk RAMDISK.IMG
See if that helps.
Edit: I was too late. Oh well
Click to expand...
Click to collapse
@ante0 please help ..!!!

ante0 said:
Download this: https://mega.nz/#!kGZEjZSQ!iLAW0onaLACrG5v7BCYZUVH6WMO1ued8PWWcpMTY6Fs
Boot to fastboot mode.
Extract bootoreo.zip:
fastboot flash kernel KERNEL.IMG
fastboot flash ramdisk RAMDISK.IMG
See if that helps.
Edit: I was too late. Oh well
Click to expand...
Click to collapse
Yo boss I know is not even the tread but I need little help to understand what do I need to do after installing custom kernel should I just install and let it be or I need any other app
I install hyperplus kernel on mate 9 oreo cause it supposed to get better battery life and speed thank you very much

mataflakitas said:
@ante0 please help ..!!!
Click to expand...
Click to collapse
What did you flash?
That error displays IF you flash an image intended for Nougat. Because on Nougat the recovery/boot partition included both ramdisk and zimage, in Oreo they are separate.
Or if it's corrupted.
Caguayote said:
Yo boss I know is not even the tread but I need little help to understand what do I need to do after installing custom kernel should I just install and let it be or I need any other app
I install hyperplus kernel on mate 9 oreo cause it supposed to get better battery life and speed thank you very much
Click to expand...
Click to collapse
You could install a kernel manager, but it shouldn't really be needed.
Unless you want to tweak the default settings a bit, then get something like Kernel Adiutor

ante0 said:
What did you flash?
That error displays IF you flash an image intended for Nougat. Because on Nougat the recovery/boot partition included both ramdisk and zimage, in Oreo they are separate.
Or if it's corrupted.
@Ante Exactly I was in Oreo and by mistake install an image of nougat .. then I ended up with that, some solution please help me, my version of my phone L09 C432 .. @Ante help please..?
Click to expand...
Click to collapse

ante0 said:
What did you flash?
That error displays IF you flash an image intended for Nougat. Because on Nougat the recovery/boot partition included both ramdisk and zimage, in Oreo they are separate.
Or if it's corrupted.
You could install a kernel manager, but it shouldn't really be needed.
Unless you want to tweak the default settings a bit, then get something like Kernel Adiutor[/QUOTE
Thank you for your help boss also the guy recommend
To do a full cycle charge the discharge for the kernel to set up I'm little confused how can i do a full charge if when I flash the kernel my battery was like 40%
So I guess the kernel startup from that.
Click to expand...
Click to collapse

mataflakitas said:
ante0 said:
What did you flash?
That error displays IF you flash an image intended for Nougat. Because on Nougat the recovery/boot partition included both ramdisk and zimage, in Oreo they are separate.
Or if it's corrupted.
Click to expand...
Click to collapse
@Ante Exactly I was in Oreo and by mistake install an image of nougat .. then I ended up with that, some solution please help me, my version of my phone L09 C432 .. @Ante help please..
Click to expand...
Click to collapse
Get to fastboot mode, you're currently in error mode.
Just hold power and volume down while USB is plugged in and you should end up in Fastboot mode. It might take a few tries.
Then flash a recovery for Oreo.
Caguayote said:
ante0 said:
What did you flash?
That error displays IF you flash an image intended for Nougat. Because on Nougat the recovery/boot partition included both ramdisk and zimage, in Oreo they are separate.
Or if it's corrupted.
You could install a kernel manager, but it shouldn't really be needed.
Unless you want to tweak the default settings a bit, then get something like Kernel Adiutor
Click to expand...
Click to collapse
Thank you for your help boss also the guy recommend
To do a full cycle charge the discharge for the kernel to set up I'm little confused how can i do a full charge if when I flash the kernel my battery was like 40%
So I guess the kernel startup from that.
Click to expand...
Click to collapse
Just let it drain now to 0% then charge to 100.

ante0 said:
Get to fastboot mode, you're currently in error mode.
Just hold power and volume down while USB is plugged in and you should end up in Fastboot mode. It might take a few tries.
Then flash a recovery for Oreo.
Exactly I can enter fastboot mode, but I do not know what files to flash, what do you recommend ...?
@ante0 ..
Click to expand...
Click to collapse

mataflakitas said:
ante0 said:
Get to fastboot mode, you're currently in error mode.
Just hold power and volume down while USB is plugged in and you should end up in Fastboot mode. It might take a few tries.
Then flash a recovery for Oreo.
Click to expand...
Click to collapse
Exactly I can enter fastboot mode, but I do not know what files to flash, what do you recommend ...?
@ante0 ..
Click to expand...
Click to collapse
Do you want to go back to stock recovery or TWRP?
If stock you can use this: https://mega.nz/#!9C4BkQyC!yYJWzK_gnvuwR8htnyDjJDFPgs_E3SBZ61MSJTnf060
If TWRP use this: https://mega.nz/#!tgd2BIRS!NOk3XkSaBX8PC5xjyrZNyIIz52aSoPZFphQNauhTKGQ

ante0 said:
Do you want to go back to stock recovery or TWRP?
If stock you can use this: https://mega.nz/#!9C4BkQyC!yYJWzK_gnvuwR8htnyDjJDFPgs_E3SBZ61MSJTnf060
If TWRP use this: https://mega.nz/#!tgd2BIRS!NOk3XkSaBX8PC5xjyrZNyIIz52aSoPZFphQNauhTKGQ
Click to expand...
Click to collapse
I will try to keep you informed...thanks

ante0 said:
Do you want to go back to stock recovery or TWRP?
If stock you can use this: https://mega.nz/#!9C4BkQyC!yYJWzK_gnvuwR8htnyDjJDFPgs_E3SBZ61MSJTnf060
If TWRP use this: https://mega.nz/#!tgd2BIRS!NOk3XkSaBX8PC5xjyrZNyIIz52aSoPZFphQNauhTKGQ
Click to expand...
Click to collapse
@ante0 brother install as you said, recovery stock everything well the flashing, but I do not achieve any change in the phone everything remains the same .. what is happening ..? It does not let me Reaching the recovery .. neither stock, nor TWRP helps @ ante0 .. what will be my problem

Help please ..up up ..!!! ???

i am having the same issue, all of my partitions are seemingly flashed correctly in order but i am bootlooping every gsi or openkirin build i flash idk what to do :/

Same here, I have high hopes for one day being able to flash these but even following all the instructions such as factory reset, format the data partition etc., it's a bootloop every time for me when flashing these and then a tedious return to EMUI.
TheDude1998 said:
i am having the same issue, all of my partitions are seemingly flashed correctly in order but i am bootlooping every gsi or openkirin build i flash idk what to do :/
Click to expand...
Click to collapse

I stuck with my Mate 9 Error mode numbers 11 and 2
mataflakitas said:
@ante0 brother install as you said, recovery stock everything well the flashing, but I do not achieve any change in the phone everything remains the same .. what is happening ..? It does not let me Reaching the recovery .. neither stock, nor TWRP helps @ ante0 .. what will be my problem
Click to expand...
Click to collapse
Hi, I have an error query when I start the phone Error Mode Func 11 Recovery Image, Error 2 Image Failed, my version is MH9-L09C432B368 I got this version following this tutorial:
android-hilfe.de/[/url] forum / root-custom-roms-modding-fuer-huawei-mate-9.3022 / anleitung-upgrade-auf-oreo-downgrade-auf-nougat.857015.html
everything worked perfect, but I got a version via OTA the 369 having the TWRP, Bootloader unlocked I had the brilliant idea to block the Bootloader to install version 369, there I start the problem of error 11 and 2.
Can anyone tell me what files should I flash to recover the cell phone? I have understood that I must flash the recovery img images as well as the img of the erecovery but I could not make the cell phone work, if I install the twrp it does not start either, they could tell me what steps I should take. Give to be able to save my cell phone?
Thank you very much everyone for the help you can give me

hybrid09 said:
Hi, I have an error query when I start the phone Error Mode Func 11 Recovery Image, Error 2 Image Failed, my version is MH9-L09C432B368 I got this version following this tutorial:
android-hilfe.de/[/url] forum / root-custom-roms-modding-fuer-huawei-mate-9.3022 / anleitung-upgrade-auf-oreo-downgrade-auf-nougat.857015.html
everything worked perfect, but I got a version via OTA the 369 having the TWRP, Bootloader unlocked I had the brilliant idea to block the Bootloader to install version 369, there I start the problem of error 11 and 2.
Can anyone tell me what files should I flash to recover the cell phone? I have understood that I must flash the recovery img images as well as the img of the erecovery but I could not make the cell phone work, if I install the twrp it does not start either, they could tell me what steps I should take. Give to be able to save my cell phone?
Thank you very much everyone for the help you can give me
Click to expand...
Click to collapse
Thanks ... :good:

mataflakitas said:
Thanks ... :good:
Click to expand...
Click to collapse
@mataflakitas
You can resolve your problem?

hybrid09 said:
@mataflakitas
You can resolve your problem?
Click to expand...
Click to collapse
I'm not in it, I'll confirm if I can succeed....:good: