hi @ante0
i just tried to do a full unroot through supersu...
and now i cant boot -.-
error mode
attention
please update system again
error!
func no : 10 (boot image)
error no : 2 (load failed)
ezraiil1 said:
hi @ante0
i just tried to do a full unroot through supersu...
and now i cant boot -.-
error mode
attention
please update system again
error!
func no : 10 (boot image)
error no : 2 (load failed)
Click to expand...
Click to collapse
PROBLEM SOLVED!
had to extract and flash kernel manually.
Download this: https://mega.nz/#!kGZEjZSQ!iLAW0onaLACrG5v7BCYZUVH6WMO1ued8PWWcpMTY6Fs
Boot to fastboot mode.
Extract bootoreo.zip:
fastboot flash kernel KERNEL.IMG
fastboot flash ramdisk RAMDISK.IMG
See if that helps.
Edit: I was too late. Oh well
ante0 said:
Download this: https://mega.nz/#!kGZEjZSQ!iLAW0onaLACrG5v7BCYZUVH6WMO1ued8PWWcpMTY6Fs
Boot to fastboot mode.
Extract bootoreo.zip:
fastboot flash kernel KERNEL.IMG
fastboot flash ramdisk RAMDISK.IMG
See if that helps.
Edit: I was too late. Oh well
Click to expand...
Click to collapse
@ante0 please help ..!!!
ante0 said:
Download this: https://mega.nz/#!kGZEjZSQ!iLAW0onaLACrG5v7BCYZUVH6WMO1ued8PWWcpMTY6Fs
Boot to fastboot mode.
Extract bootoreo.zip:
fastboot flash kernel KERNEL.IMG
fastboot flash ramdisk RAMDISK.IMG
See if that helps.
Edit: I was too late. Oh well
Click to expand...
Click to collapse
Yo boss I know is not even the tread but I need little help to understand what do I need to do after installing custom kernel should I just install and let it be or I need any other app
I install hyperplus kernel on mate 9 oreo cause it supposed to get better battery life and speed thank you very much
mataflakitas said:
@ante0 please help ..!!!
Click to expand...
Click to collapse
What did you flash?
That error displays IF you flash an image intended for Nougat. Because on Nougat the recovery/boot partition included both ramdisk and zimage, in Oreo they are separate.
Or if it's corrupted.
Caguayote said:
Yo boss I know is not even the tread but I need little help to understand what do I need to do after installing custom kernel should I just install and let it be or I need any other app
I install hyperplus kernel on mate 9 oreo cause it supposed to get better battery life and speed thank you very much
Click to expand...
Click to collapse
You could install a kernel manager, but it shouldn't really be needed.
Unless you want to tweak the default settings a bit, then get something like Kernel Adiutor
ante0 said:
What did you flash?
That error displays IF you flash an image intended for Nougat. Because on Nougat the recovery/boot partition included both ramdisk and zimage, in Oreo they are separate.
Or if it's corrupted.
@Ante Exactly I was in Oreo and by mistake install an image of nougat .. then I ended up with that, some solution please help me, my version of my phone L09 C432 .. @Ante help please..?
Click to expand...
Click to collapse
ante0 said:
What did you flash?
That error displays IF you flash an image intended for Nougat. Because on Nougat the recovery/boot partition included both ramdisk and zimage, in Oreo they are separate.
Or if it's corrupted.
You could install a kernel manager, but it shouldn't really be needed.
Unless you want to tweak the default settings a bit, then get something like Kernel Adiutor[/QUOTE
Thank you for your help boss also the guy recommend
To do a full cycle charge the discharge for the kernel to set up I'm little confused how can i do a full charge if when I flash the kernel my battery was like 40%
So I guess the kernel startup from that.
Click to expand...
Click to collapse
mataflakitas said:
ante0 said:
What did you flash?
That error displays IF you flash an image intended for Nougat. Because on Nougat the recovery/boot partition included both ramdisk and zimage, in Oreo they are separate.
Or if it's corrupted.
Click to expand...
Click to collapse
@Ante Exactly I was in Oreo and by mistake install an image of nougat .. then I ended up with that, some solution please help me, my version of my phone L09 C432 .. @Ante help please..
Click to expand...
Click to collapse
Get to fastboot mode, you're currently in error mode.
Just hold power and volume down while USB is plugged in and you should end up in Fastboot mode. It might take a few tries.
Then flash a recovery for Oreo.
Caguayote said:
ante0 said:
What did you flash?
That error displays IF you flash an image intended for Nougat. Because on Nougat the recovery/boot partition included both ramdisk and zimage, in Oreo they are separate.
Or if it's corrupted.
You could install a kernel manager, but it shouldn't really be needed.
Unless you want to tweak the default settings a bit, then get something like Kernel Adiutor
Click to expand...
Click to collapse
Thank you for your help boss also the guy recommend
To do a full cycle charge the discharge for the kernel to set up I'm little confused how can i do a full charge if when I flash the kernel my battery was like 40%
So I guess the kernel startup from that.
Click to expand...
Click to collapse
Just let it drain now to 0% then charge to 100.
ante0 said:
Get to fastboot mode, you're currently in error mode.
Just hold power and volume down while USB is plugged in and you should end up in Fastboot mode. It might take a few tries.
Then flash a recovery for Oreo.
Exactly I can enter fastboot mode, but I do not know what files to flash, what do you recommend ...?
@ante0 ..
Click to expand...
Click to collapse
mataflakitas said:
ante0 said:
Get to fastboot mode, you're currently in error mode.
Just hold power and volume down while USB is plugged in and you should end up in Fastboot mode. It might take a few tries.
Then flash a recovery for Oreo.
Click to expand...
Click to collapse
Exactly I can enter fastboot mode, but I do not know what files to flash, what do you recommend ...?
@ante0 ..
Click to expand...
Click to collapse
Do you want to go back to stock recovery or TWRP?
If stock you can use this: https://mega.nz/#!9C4BkQyC!yYJWzK_gnvuwR8htnyDjJDFPgs_E3SBZ61MSJTnf060
If TWRP use this: https://mega.nz/#!tgd2BIRS!NOk3XkSaBX8PC5xjyrZNyIIz52aSoPZFphQNauhTKGQ
ante0 said:
Do you want to go back to stock recovery or TWRP?
If stock you can use this: https://mega.nz/#!9C4BkQyC!yYJWzK_gnvuwR8htnyDjJDFPgs_E3SBZ61MSJTnf060
If TWRP use this: https://mega.nz/#!tgd2BIRS!NOk3XkSaBX8PC5xjyrZNyIIz52aSoPZFphQNauhTKGQ
Click to expand...
Click to collapse
I will try to keep you informed...thanks
ante0 said:
Do you want to go back to stock recovery or TWRP?
If stock you can use this: https://mega.nz/#!9C4BkQyC!yYJWzK_gnvuwR8htnyDjJDFPgs_E3SBZ61MSJTnf060
If TWRP use this: https://mega.nz/#!tgd2BIRS!NOk3XkSaBX8PC5xjyrZNyIIz52aSoPZFphQNauhTKGQ
Click to expand...
Click to collapse
@ante0 brother install as you said, recovery stock everything well the flashing, but I do not achieve any change in the phone everything remains the same .. what is happening ..? It does not let me Reaching the recovery .. neither stock, nor TWRP helps @ ante0 .. what will be my problem
Help please ..up up ..!!! ???
i am having the same issue, all of my partitions are seemingly flashed correctly in order but i am bootlooping every gsi or openkirin build i flash idk what to do :/
Same here, I have high hopes for one day being able to flash these but even following all the instructions such as factory reset, format the data partition etc., it's a bootloop every time for me when flashing these and then a tedious return to EMUI.
TheDude1998 said:
i am having the same issue, all of my partitions are seemingly flashed correctly in order but i am bootlooping every gsi or openkirin build i flash idk what to do :/
Click to expand...
Click to collapse
I stuck with my Mate 9 Error mode numbers 11 and 2
mataflakitas said:
@ante0 brother install as you said, recovery stock everything well the flashing, but I do not achieve any change in the phone everything remains the same .. what is happening ..? It does not let me Reaching the recovery .. neither stock, nor TWRP helps @ ante0 .. what will be my problem
Click to expand...
Click to collapse
Hi, I have an error query when I start the phone Error Mode Func 11 Recovery Image, Error 2 Image Failed, my version is MH9-L09C432B368 I got this version following this tutorial:
android-hilfe.de/[/url] forum / root-custom-roms-modding-fuer-huawei-mate-9.3022 / anleitung-upgrade-auf-oreo-downgrade-auf-nougat.857015.html
everything worked perfect, but I got a version via OTA the 369 having the TWRP, Bootloader unlocked I had the brilliant idea to block the Bootloader to install version 369, there I start the problem of error 11 and 2.
Can anyone tell me what files should I flash to recover the cell phone? I have understood that I must flash the recovery img images as well as the img of the erecovery but I could not make the cell phone work, if I install the twrp it does not start either, they could tell me what steps I should take. Give to be able to save my cell phone?
Thank you very much everyone for the help you can give me
hybrid09 said:
Hi, I have an error query when I start the phone Error Mode Func 11 Recovery Image, Error 2 Image Failed, my version is MH9-L09C432B368 I got this version following this tutorial:
android-hilfe.de/[/url] forum / root-custom-roms-modding-fuer-huawei-mate-9.3022 / anleitung-upgrade-auf-oreo-downgrade-auf-nougat.857015.html
everything worked perfect, but I got a version via OTA the 369 having the TWRP, Bootloader unlocked I had the brilliant idea to block the Bootloader to install version 369, there I start the problem of error 11 and 2.
Can anyone tell me what files should I flash to recover the cell phone? I have understood that I must flash the recovery img images as well as the img of the erecovery but I could not make the cell phone work, if I install the twrp it does not start either, they could tell me what steps I should take. Give to be able to save my cell phone?
Thank you very much everyone for the help you can give me
Click to expand...
Click to collapse
Thanks ... :good:
mataflakitas said:
Thanks ... :good:
Click to expand...
Click to collapse
@mataflakitas
You can resolve your problem?
hybrid09 said:
@mataflakitas
You can resolve your problem?
Click to expand...
Click to collapse
I'm not in it, I'll confirm if I can succeed....:good:
Related
hi all i don't know if this is the right section, in case i'm sorry but i'm a bit desperate x.x this is my problem:
i've a ze551ml deluxe version while flashing some things (supersu,kernel ecc..) i've flashed also a file called splashscreen.img(i don't know if it's the cause of my problem) but after that my phone It starts only in fastboot mode recovery doesn't work,i've tried to flash some img files like (boot.img,recovery ecc..) but nothing it's happend, if try to flash a raw file by asus flash tool give an error while flashing "remote: not allowed to flash this partition" i don't know what to do please help me :'(
UserName_K said:
hi all i don't know if this is the right section, in case i'm sorry but i'm a bit desperate x.x this is my problem:
i've a ze551ml deluxe version while flashing some things (supersu,kernel ecc..) i've flashed also a file called splashscreen.img(i don't know if it's the cause of my problem) but after that my phone It starts only in fastboot mode recovery doesn't work,i've tried to flash some img files like (boot.img,recovery ecc..) but nothing it's happend, if try to flash a raw file by asus flash tool give an error while flashing "remote: not allowed to flash this partition" i don't know what to do please help me :'(
Click to expand...
Click to collapse
Which partition has been flashed with "splashscreen.img" and whioch tool did you use for it?
LS.xD said:
Which partition has been flashed with "splashscreen.img" and whioch tool did you use for it?
Click to expand...
Click to collapse
i've flashed by recovery so i don't know:crying:
there is a way for fix it? =(
UserName_K said:
i've flashed by recovery so i don't know:crying:
there is a way for fix it? =(
Click to expand...
Click to collapse
Do you have a link to the file? You can't flash .img files directly by recovery...
LS.xD said:
Do you have a link to the file? You can't flash .img files directly by recovery...
Click to expand...
Click to collapse
it was a mistake :crying: anyway i don't have the link for splashscreen.img but if i remember well i've download it when i've unlocked the bootloader, i can solve in some way?Even by lost all data,all solutions are good !
UserName_K said:
it was a mistake :crying: anyway i don't have the link for splashscreen.img but if i remember well i've download it when i've unlocked the bootloader, i can solve in some way?Even by lost all data,all solutions are good !
Click to expand...
Click to collapse
What happens when you flash boot.img + recovery.img using fastboot? Any error messages?
LS.xD said:
What happens when you flash boot.img + recovery.img using fastboot? Any error messages?
Click to expand...
Click to collapse
just try for security , both operation working fine no error
UserName_K said:
just try for security , both operation working fine no error
Click to expand...
Click to collapse
And once done you can't boot stock recovery?
LS.xD said:
And once done you can't boot stock recovery?
Click to expand...
Click to collapse
nope, boot always in fastboot mode
UserName_K said:
nope, boot always in fastboot mode
Click to expand...
Click to collapse
Are you using the .img files from latest firmware UL-Z00A-WW-4.21.40.184-user ??
LS.xD said:
Are you using the .img files from latest firmware UL-Z00A-WW-4.21.40.184-user ??
Click to expand...
Click to collapse
just tried and nothing seems changed
UserName_K said:
just tried and nothing seems changed
Click to expand...
Click to collapse
Download latest TWRP
Try to boot is as followed:
fastboot boot twrp-3.0.2-0-Z00A.img
LS.xD said:
Download latest TWRP
Try to boot is as followed:
fastboot boot twrp-3.0.2-0-Z00A.img
Click to expand...
Click to collapse
done but it's the same, boot in fastboot mode i'm really confused never happend something like this
UserName_K said:
done but it's the same, boot in fastboot mode i'm really confused never happend something like this
Click to expand...
Click to collapse
I'm really curious what file you flashed to which partition, its awkward that you can't exactly remember what you did to make the phone beeing like this.
Just by the way: is your bootloader still unlocked?
LS.xD said:
I'm really curious what file you flashed to which partition, its awkward that you can't exactly remember what you did to make the phone beeing like this.
Just by the way: is your bootloader still unlocked?
Click to expand...
Click to collapse
mmh i've follow the guide for bootloader here http://forum.xda-developers.com/zenfone2/general/root-newbie-root-instructions-zenfone-2-t3114063
and probably here i've get the splashscreen, when you unlock the bootloader the splashscreen become white, the file img restore the default asus's splashscreen anyway how can check the status of bootloader?
UserName_K said:
mmh i've follow the guide for bootloader here http://forum.xda-developers.com/zenfone2/general/root-newbie-root-instructions-zenfone-2-t3114063
and probably here i've get the splashscreen, when you unlock the bootloader the splashscreen become white, the file img restore the default asus's splashscreen anyway how can check the status of bootloader?
Click to expand...
Click to collapse
I just minded that your device has a own section.
UNBRICK GUIDE
Your problem should be posted HERE
LS.xD said:
I just minded that your device has a own section.
UNBRICK GUIDE
Your problem should be posted HERE
Click to expand...
Click to collapse
ok i'll try thanks
02/22 Update: Project temporarily on hold until March due to school.
03/19 Update: I'm back.
03/27 Update: It booted
Hi S Advance Community! I don't own this device but I compiled CM14.1 and I need testers who know how to logcat, use odin to reflash boot image, etc.
THIS BUILD IS TOTALLY UNTESTED (i don't have an s advance)!!! AS A RESULT, RECOVERY MODE MIGHT NOT WORK AFTER FLASHING THIS ROM AND YOU'LL NEED TO FLASH STOCK ROM USING ODIN IF THAT HAPPENS!
I just need info if it boots or not, and logcat/last_kmsg if it doesn't.
Link of rom (for advanced users only)
YOU AGREE TO NOT KILL ME FOR ANYTHING THAT HAPENS TO YOUR PHONE!
https://www.androidfilehost.com/?fid=745425885120695238 (again, FLASH AT YOUR OWN RISK)
Kernel Source (for GPL Compliance)
EDIT: Use this guide on how to make a logcat/last_kmsg dump when the ROM doesn't boot if you don't know how to (no need to flash the zip on that thread as this rom is an eng build already).
EDIT #2: ROM doesn't boot so I need the /proc/last_kmsg file obtainable from recovery after a failed boot.
Thanks! Downloading it ?
I'm waiting for feedback from the already downloaded it. If successful, please share some screenshots. Thanks in advance guys.
No-Lags said:
I'm waiting for feedback from the already downloaded it. If successful, please share some screenshots. Thanks in advance guys.
Click to expand...
Click to collapse
Sure
Hello the installation was a success, but when he went to the screen from Samsung he stayed frozen in it.
GabrielR52 said:
Hello the installation was a success, but when he went to the screen from Samsung he stayed frozen in it.
Click to expand...
Click to collapse
Thanks for testing! While the phone is stuck on the samsung logo, can you press the 3 button combo for recovery for 10+ seconds (without pulling the battery before) until the phone boots to recovery and copy /proc/last_kmsg to sdcard using recovery then upload it here? I need to see the kernel logs if it's an init related issue or a library related one.
Yea ! The installation was a success but it didn't boot...Stuck On the splash screen...I will flash it again and will let you know the kernal logs and stuff.....Thanks For your support for Janice
I will send tomorrow because today i haven't had the time, so that the last time I installed this android even holding the 3 keys to enter the recovery mode the cell phone was stopped on the logo of samsung, would have some other way of copying the /proc/last_kmsg ? But tomorrow i will install again and I'll see if i go into recovery, sorry my english if it is bad is that i am from Brazil
On Codina must be enabled SELINUX with boot parameter - 1 and cmdline=selinux.bootmode=permissive to boot up Nougat. For MM this wasn't needed.
Can someone try flashing this boot.img to see if the rom will boot?
https://drive.google.com/open?id=0Bw4AfK_vJ7JycWV4TmlOeldzWkE
3liteking148 said:
Can someone try flashing this boot.img to see if the rom will boot?
https://drive.google.com/open?id=0Bw4AfK_vJ7JycWV4TmlOeldzWkE
Click to expand...
Click to collapse
After flashing the rom do i have to flash it with recovery?
Tech x 125 said:
After flashing the rom do i have to flash it with recovery?
Click to expand...
Click to collapse
Flash it with TWRP (because twrp can flash images since 3.0)
Rom isn't boot. I'm using Phiz-touch
After flash not work recovery
psycrow17 said:
Rom isn't boot. I'm using Phiz-touch
After flash not work recovery
Click to expand...
Click to collapse
Thanks for reporting! No wonder why no one's giving me logs so I'm gonna make an odin flashable boot.img later with working recovery from some rom.
Hi guys! This is the just the odin-flashable tar of the boot image of PolishVodka's CM14.1 as recovery was said to work there.
https://drive.google.com/open?id=0Bw4AfK_vJ7JycVBST3pwS18tdms
Can I expect the recovery has been immersed in a new build? Maybe I'll try for it.
3liteking148 said:
Hi guys! This is the just the odin-flashable tar of the boot image of PolishVodka's CM14.1 as recovery was said to work there.
https://drive.google.com/open?id=0Bw4AfK_vJ7JycVBST3pwS18tdms
Click to expand...
Click to collapse
You know we have kernel + ramdisk + recovery on the same partition (initramfs)?
And here you'll see how this working:
https://github.com/Epirex/Samsung_STE_Kernel/blob/marshmallow/usr/u8500_initramfs.list
PolishVodka said:
You know we have kernel + ramdisk + recovery on the same partition (initramfs)?
And here you'll see how this working:
https://github.com/Epirex/Samsung_STE_Kernel/blob/marshmallow/usr/u8500_initramfs.list
Click to expand...
Click to collapse
Yeah I know about that partitioning layout but how should i name the initramfs for flashing in odin?
Edit: nvm about that i got what you're saying that there's something wrong about my initramfs. Thanks for the info
I could not install this new boot.img by Odin and cannot seem to get the log by logcat by that of a mistake "/sbin/sh: exec: line 1: logcat: not found"
????
I really need help, i was trying to go back to stock and i have no idea what happened, was flashing just fine and then it said crust gave me a error so i thought to just wipe cache and start over well when i did that, it went to a white screen now all i can do is get into fastboot mode, tried almost everything, have the stock firmware and roll back files but i cant do the 3 button method just boots to a blue screen over and over agin then back to the white screen. can someone please help me
dussycole92 said:
I really need help, i was trying to go back to stock and i have no idea what happened, was flashing just fine and then it said crust gave me a error so i thought to just wipe cache and start over well when i did that, it went to a white screen now all i can do is get into fastboot mode, tried almost everything, have the stock firmware and roll back files but i cant do the 3 button method just boots to a blue screen over and over agin then back to the white screen. can someone please help me
Click to expand...
Click to collapse
You can't get into recovery or erecovery? Only fastboot? Does it say you still have the bootloader unlocked?
Gus194 said:
You can't get into recovery or erecovery? Only fastboot? Does it say you still have the bootloader unlocked?
Click to expand...
Click to collapse
yeah it says phone unlocked and FRP unlocked but wont let me flash twrp img, boots on the computer but not on the phone?
dussycole92 said:
yeah it says phone unlocked and FRP unlocked but wont let me flash twrp img, boots on the computer but not on the phone?
Click to expand...
Click to collapse
What error does it say when you try to flash TWRP?
Gus194 said:
What error does it say when you try to flash TWRP?
Click to expand...
Click to collapse
says '"error mode" please update system again then it says error! func no : 16 (lmp3 image) error no : 1 (security verify faild!) then it will keep looping and the Huawei update extrator wont load the update.app, im just a mess right now cause this is my work phone and im freaking out right now
Have you tried flashing the system files and the rest of the files by fastboot yet?
Gus194 said:
Have you tried flashing the system files and the rest of the files by fastboot yet?
Click to expand...
Click to collapse
how do i do that? all i have are the stock firmware and the rollback files with the dl files? but its for 6.0
dussycole92 said:
how do i do that? all i have are the stock firmware and the rollback files with the dl files? but its for 6.0
Click to expand...
Click to collapse
Extract the update.app files with the Huawei Update Extractor program. Google it
And then try to flash the system.img via fastboot in the bootloader
Gus194 said:
Extract the update.app files with the Huawei Update Extractor program. Google it
And then try to flash the system.img via fastboot in the bootloader
Click to expand...
Click to collapse
Huawei update extrator wont read the update.app, it shows up but when i click it to open it gives an error?!
dussycole92 said:
Huawei update extrator wont read the update.app, it shows up but when i click it to open it gives an error?!
Click to expand...
Click to collapse
It's most likely a corrupted update.app thats probably the problem. Redownload it
Gus194 said:
It's most likely a corrupted update.app thats probably the problem. Redownload it
Click to expand...
Click to collapse
okay i got it! what are the steps exactly? btw thanks so much for the help!!!
dussycole92 said:
okay i got it! what are the steps exactly? btw thanks so much for the help!!!
Click to expand...
Click to collapse
Just download the stock firmware again for your phone model
Gus194 said:
Just download the stock firmware again for your phone model
Click to expand...
Click to collapse
i have the stock 6.0 firmware and the rollback file, whats the command prompt id run and what files would i flash, sorry for all the questions, never had this problem on any phone?
dussycole92 said:
i have the stock 6.0 firmware and the rollback file, whats the command prompt id run and what files would i flash, sorry for all the questions, never had this problem on any phone?
Click to expand...
Click to collapse
You can't get into recovery right? Or the update menu by pressing volume up + down and power at the same time?
Gus194 said:
You can't get into recovery right? Or the update menu by pressing volume up + down and power at the same time?
Click to expand...
Click to collapse
yeah i cant get in to either, and the system img fails when i try to flash it in fastboot mode, and twrp wont boo teven if it successfully flashes on my end, and when i do the 3 button combo it just flashes a blu screen over and over again, i feel like im screwed
dussycole92 said:
yeah i cant get in to either, and the system img fails when i try to flash it in fastboot mode, and twrp wont boo teven if it successfully flashes on my end, and when i do the 3 button combo it just flashes a blu screen over and over again, i feel like im screwed
Click to expand...
Click to collapse
Nah there's still hope. I screwed up worse. I had the same problem that I couldn't get into recovery. But I had the FRP Lock and Bootloader Locked also. But what I had to do was pay 15 Euros for a program called DC Phoenix and it fixed all my problem. Not all is lost
Gus194 said:
Nah there's still hope. I screwed up worse. I had the same problem that I couldn't get into recovery. But I had the FRP Lock and Bootloader Locked also. But what I had to do was pay 15 Euros for a program called DC Phoenix and it fixed all my problem. Not all is lost
Click to expand...
Click to collapse
really dont wanna drop money lol, but i have everything installed, just need to know what to do next, the system img isnt flashing
dussycole92 said:
really dont wanna drop money lol, but i have everything installed, just need to know what to do next, the system img isnt flashing
Click to expand...
Click to collapse
Well you can try to use the SRK toolkit if u want
I need help too, I have a 64 gig US version. Just rooted it today and got TWRP, made a back up. Flashed 2 roms, and none would go past the boot screen so I tried to do my back up and it error'd out at the last minute. I would like to just revert everything back to stock and lock the bootloader. IS this possible? if I do the EMUI update it fails, prob cause the boot loader is locked.
Gus194 said:
Well you can try to use the SRK toolkit if u want
Click to expand...
Click to collapse
i just need to know how the step by step why to get the stock recovery and system on the phone?
Hi all
I just updated to ESG5 version of OREO. The nightmare comes... I cannot boot again now !!
Until I flash back the original version of OREO, that is , with ESG5 bootloader one, it can boot.
However, I cannot use TWRP and root anymore !
Anyone has idea? thanks a lot
AP_G930FXXS5ESG5_CL14843133_QB24881129_REV00_user_low_ship_meta.tar
BL_G930FXXS5ESG5_CL14843133_QB24881129_REV00_user_low_ship.tar
CP_G930FXXS5ESG5_CP13334970_CL14843133_QB24881129_REV00_user_low_ship.tar
CSC_OZS_G930FOZS5ESG5_CL14843133_QB24881129_REV00_user_low_ship.tar
sonic997 said:
Hi all
I just updated to ESG5 version of OREO. The nightmare comes... I cannot boot again now !!
Until I flash back the original version of OREO, that is , with ESG5 bootloader one, it can boot.
However, I cannot use TWRP and root anymore !
Anyone has idea? thanks a lot
AP_G930FXXS5ESG5_CL14843133_QB24881129_REV00_user_low_ship_meta.tar
BL_G930FXXS5ESG5_CL14843133_QB24881129_REV00_user_low_ship.tar
CP_G930FXXS5ESG5_CP13334970_CL14843133_QB24881129_REV00_user_low_ship.tar
CSC_OZS_G930FOZS5ESG5_CL14843133_QB24881129_REV00_user_low_ship.tar
Click to expand...
Click to collapse
what version of TWRP are you using? Theyre not all cross compatible
youdoofus said:
what version of TWRP are you using? Theyre not all cross compatible
Click to expand...
Click to collapse
twrp-3.3.1-0-herolte
I have already flashed the following but cannot boot !
no-verity-opt-encrypt-6.0.zip
sonic997 said:
twrp-3.3.1-0-herolte
I have already flashed the following but cannot boot !
no-verity-opt-encrypt-6.0.zip
Click to expand...
Click to collapse
wait, what? what is that file and why are you flashing it? Also, its a zip file, im at work atm and its 756 am and and ive only had 2 sips of my first monster, but as i recall, you only flash tar.md5 files in Odin
youdoofus said:
wait, what? what is that file and why are you flashing it? Also, its a zip file, im at work atm and its 756 am and and ive only had 2 sips of my first monster, but as i recall, you only flash tar.md5 files in Odin
Click to expand...
Click to collapse
I flash TWRP in Odin and flash no-verity-opt-encrypt-6.0.zip in TWRP.
It has a normal boot for previous version of bootloader.
sonic997 said:
I flash TWRP in Odin and flash no-verity-opt-encrypt-6.0.zip in TWRP.
It has a normal boot for previous version of bootloader.
Click to expand...
Click to collapse
ok, that other post made it seem like you were trying to flash that in Odin LoL anyways so, when you do all that and then reboot, it just goes black or does it bootloop?
youdoofus said:
ok, that other post made it seem like you were trying to flash that in Odin LoL anyways so, when you do all that and then reboot, it just goes black or does it bootloop?
Click to expand...
Click to collapse
yes, it just bootloop
Don't use no-verity-opt-encrypt-6.0.zip (you probably don't need it) .
Start all over. Flash the stock ROM with Odin, then flash TWRP, and then flash Magisk (via TWRP).
Plz plz read it at least once
I was flashing miui 12 OTA through orange fox recovery. Now my phone is dead. It can boot into recovery, fastboot flawlessly. It is detected in miflash also but whenever I am trying to flash miui 11 any version stock rom it gives error "cannot recieve hello packet". I have flashed many roms from orange fox and all of them flashed successfully but it is booting to recovery only. Plzz help
PS : I have read many threads but remove the battery /let the battery drain out method was not much explanatory so I couldn't understand it.. Plz anyone can suggest alternative method or same method in detail.
bro download proper fastboot rom,then extract twice via 7zip
then u will be able to flash via mi tool.
https://xiaomifirmwareupdater.com/miui/violet/stable/V11.0.10.0.PFHINXM/
tell me if it works or not.
I already have done it bro... Not working at all
Subrata520 said:
bro download proper fastboot rom,then extract twice via 7zip
then u will be able to flash via mi tool.
https://xiaomifirmwareupdater.com/miui/violet/stable/V11.0.10.0.PFHINXM/
tell me if it works or not.
Click to expand...
Click to collapse
I already have done it bro.. It doesn't work at all
PratikOimbe said:
I already have done it bro.. It doesn't work at all
Click to expand...
Click to collapse
i used this method to flash fastboot rom, and it works.no error at all.
do u try to lock ur bootloader?
just select clean all tab only.
PratikOimbe said:
I already have done it bro.. It doesn't work at all
Click to expand...
Click to collapse
Whats the error?
Is it flashing successfully? Or cant flash at all
Subrata520 said:
bro download proper fastboot rom,then extract twice via 7zip
then u will be able to flash via mi tool.
https://xiaomifirmwareupdater.com/miui/violet/stable/V11.0.10.0.PFHINXM/
tell me if it works or not.
Click to expand...
Click to collapse
Subrata520 said:
i used this method to flash fastboot rom, and it works.no error at all.
do u try to lock ur bootloader?
just select clean all tab only.
Click to expand...
Click to collapse
I had selected clean all tab only.. But nothing work out
shimalxavier said:
Whats the error?
Is it flashing successfully? Or cant flash at all
Click to expand...
Click to collapse
Cannot recieve hello packet error and then flashing fails within seconds..
But I had flashed this same file few months back easily but after I bricked my phone as I mentioned in OP it is giving error
PratikOimbe said:
Cannot recieve hello packet error and then flashing fails within seconds..
But I had flashed this same file few months back easily but after I bricked my phone as I mentioned in OP it is giving error
Click to expand...
Click to collapse
I think you need to remove the battery and try..im not sure though...
Try searching for this error...its a kind of general error so you would find an answer in some other device section
First of all download miui 11 recovery zip file for violet, after that boot into pitch black recovery, then wipe all partitions you see there and must format data then reboot to pitch black recovery again now place the zip file into your phone and flash and you will be good to go
Here is the link:-
http://bigota.d.miui.com/V11.0.2.0.QFHINXM/miui_VIOLETINGlobal_V11.0.2.0.QFHINXM_73c0bc5751_10.0.zip