Database Info

Please help me with download mode!!

Hello, i am currently trying to root my sisters galaxy s 4g... Her Baseband is T949VUVKI1. Firmware is 2.3.5, Build Number is GINGERBREAD.VUVKI1. i remember flashing her phone to 2.3.5 and download mode working perfectly fine, and for some reason it wont go into download mode at all... the computer is not recognizing her phone either. YES, i do have usb drivers installed otherwise my galaxy s 4g wouldnt be recognized on my computer(odin specifically, not turning yellow). Please help, i have searched everywhere in the internet and tried almost everything... Volume up and down and plug charger, batter out volume up and down usb and battery in etc. PLEASE HELP!! Thank You in Advance.

Nvm
10c

1. Try reinstalling to drivers. Also make sure you're using the same USB port as Windows can be funny about it it sometimes.
2. if download mode is being difficult, go download the Android SDK from www.android.com. Install it, run it, and only download the platform tools. When that's done, open a command promt, CD to where the plaform tools installed (either c:\program files\Android\Android-sdk\platform-tools or c:\program files (x86)\Android\Android-sdk\platform-tools ), then issue the command: adb reboot download.
3. I suggest you check the dev section for bhundven's one-click collection. Uses Java and Heimdall vs. ODIN and works easily.
Sent from my SGH-T959V using XDA App

i have this issue 2.3.5 messed me up. Odin sees my phone in debug mode but not in download mode...using odin 1.85 sinse it is the only version that responds to my phone at all. help please!

Tytan0007 said:
i have this issue 2.3.5 messed me up. Odin sees my phone in debug mode but not in download mode...using odin 1.85 sinse it is the only version that responds to my phone at all. help please!
Click to expand...
Click to collapse
Get it back into download mode, go grab a bhundven's one-click. The one-clicks utilize Heimdall vs. ODIN, which means they use open-source USB drivers instead of the proprietary Samsung drivers. See if that enables the computer to see the phone. If so, flash the one-click

Should I uninstall the samsung drivers prior to using Heimdall's One-Click?

Tytan0007 said:
Should I uninstall the samsung drivers prior to using Heimdall's One-Click?
Click to expand...
Click to collapse
That's a good idea. Some people have reported conflicts between the drivers.

Why would only Odin 1.85 see my phone in USB Debugging and not in download mode? And all other Odin verisions never see my phone, no matter what state it is in... I am at work so I will give the one click another try when I get home. I never thought of uninstalling the Samsung drivers prior to install; however, I did use the one click method to no avail. However, Heimdall's one-click was able to see my device it just kept giving me a driver error. This is so crazy it might just work.

Tytan0007 said:
Why would only Odin 1.85 see my phone in USB Debugging and not in download mode? And all other Odin verisions never see my phone, no matter what state it is in... I am at work so I will give the one click another try when I get home. I never thought of uninstalling the Samsung drivers prior to install; however, I did use the one click method to no avail. However, Heimdall's one-click was able to see my device it just kept giving me a driver error. This is so crazy it might just work.
Click to expand...
Click to collapse
I wish I had a good answer. ODIN's a funny animal. I've been fortunate and not had any problems with it. I am hoping you are correct - maybe it was just a driver conflict. Let me know how it goes.

didn't work...

You could try downloading a terminal app from the market. Open the terminal and type:
reboot download
See if that does it.

***Update***
Okay, so Oneclick was not working at all no matter what I did with the drivers. However, in all my tinkering with it I installed the Samsung Driver, the Open Source one, and some gadget driver as well from oneclick.
Doing this put all these drivers in my computer. Then I went into my Device manager (Win 7) and looked at my USB driver and I uninstalled everything and went to the stock win 7 usb driver. Then I plugged my phone in and my computer began searching for drivers for this device when it decided that it would be a good idea to load all three drivers at once and voila my phone was then showing up on ODIN 1.85.
I then proceeded to flash my phone with a rom, probably the wrong one considering I was coming from 2.3.5 and my phone boot looped and then soft bricked(sorry if I used these term incorrectly, noobin it).
After, some nervous moment of scouring XDA I found the god-send of a post on getting in to download mode, using odin, and flashing stock 2.3.6 - thank you Raver(I believe). When I did this, my phone magically started obeying ODIN like a devout viking and is now running 2.3.6 superbly.
Keeping with my phones newly found viking heritage, I intend to figure out how to properly root it, update the kernal and modem(not sure which one is best), get CWM, and subsequesntly put in Valhalla Black.
Seeing as though this last rendevous with flashing caused me a little scare I may hold off and wait to see what the next big update is (maybe a port ICS variant) and then go with that.
Anyway, thank you Stephen for helping me out with this and to everyone in this post.

Here's some reading for you Tytan,
http://forum.xda-developers.com/wiki/Samsung_Galaxy_S_4G#FAQ_.28with_answers.29
PS: Unless you wanna brick your phone, do not flash anything that isn't intended for the SGH-T959V Samsung Galaxy S 4G. You're saying you wanna flash a Vibrant ROM. You can, if you want an expensive paperweight. Happy flashing!

2.3.5 may have been for vibrant...yeah I think I got lucky. I did it prior to knowing about xda.
Sent from my SGH-T959V using XDA App

Tytan0007 said:
didn't work...
Click to expand...
Click to collapse
How are you getting into download mode?
There was a post in another thread where the person apparently was using the power menu to get into download mode or maybe the adb command.
Have you tried both the old fashion volume +/- and plug in usb cable? Or the adb command?
Do you have access to another computer? Believe it or not sometimes just changing computers will make the difference.
Weird when I replied there was no posts other than the ones on the first page...oh well glad its working now.

[Q] Can't boot into recovery

I think i lost my CWM recovery after installing the MIUI Rom.Instead it just sits on the samsung screen. I read that if this happens, to Download sgs kernel flasher, CWM community kernel, and Flash kernel via sgs kernel flasher.But i've searched the forums and i can't find the downloads to these items. Also, does this require me to plug my phone into my computer in download mode? Because iv'e tried that with odin before but there's an issue connecting my phone to the computer in download mode. If so is there another way i could get CWM recovery back. Thanks in advance.

Community kernel is in the super infuse thread.... Stickied in the android development section.
Sgs kernel flasher is in the Google play.
Sent from my SAMSUNG-SGH-I997 using XDA

Here's another option. Second post will get you CWM recovery along with Entropy's DD kernel from 11/27/11. After that you can flash what you want.
http://forum.xda-developers.com/showthread.php?t=1524081

BrassGuy said:
Community kernel is in the super infuse thread.... Stickied in the android development section.
Sgs kernel flasher is in the Google play.
Sent from my SAMSUNG-SGH-I997 using XDA
Click to expand...
Click to collapse
Thanks for replying. I got the sgs kernel flasher on my phone but i think the site the CWM comunity kernel was uploaded to is down. that or it's a bad link

Zen Arcade said:
Here's another option. Second post will get you CWM recovery along with Entropy's DD kernel from 11/27/11. After that you can flash what you want.
http://forum.xda-developers.com/showthread.php?t=1524081
Click to expand...
Click to collapse
i dont think i'll be able to do this as it requires me to put my phone in download mode and i can't get my phone to show up while in download mode using any program like odin.

The Heimdall app installs its own drivers but you may need the Samsung drivers for this work. Maybe try with Samsung kies mini installed, which provides the base drivers.
If that doesn't work, try a different usb cable or port on your PC.
.z. (from BaT phone)

Zen Arcade said:
The Heimdall app installs its own drivers but you may need the Samsung drivers for this work. Maybe try with Samsung kies mini installed, which provides the base drivers.
If that doesn't work, try a different usb cable or port on your PC.
.z. (from BaT phone)
Click to expand...
Click to collapse
I just tried heimdall but i still couldn't install the drivers. My phone shows up as unknown device. So unless i convince my sister to let me use her laptop, my only other option is to flash the CWM Community kernel but the link is down.

Samsung USB driver download.
for Windows 32bit
for Windows 64bit
After installed reboot your computer please and connect usb test.
Odin Community kernel download.
http://www.mediafire.com/?v1jg2wz1d1ia714
- Unzip the .zip file, Run Odin3_v1.81.exe
- Place your phone into download mode (pull battery, hold both volume keys and plug the USB cable)
- Your phone shows in Odin as COM##
- Click the PDA button and choose the .tar.md5 and start.
- After completes, it will reboot your device and should boot up normal.
CWM test, turn off you phone, hold both volume keys and power button boot to CWM (red or green menu)
(Sorry, I'm not good in English )

So, you can start up your phone ok but you can't get into CWM?
I'm no expert but I've learned a lot after bricking my phone! One thing I discovered is that Odin doesn't have to be able to recognize your phone for it to work. So long as you can get a yellow light in the first box, you're good to go. Also, sometimes the yellow light won't show up. In that case, try turning off your phone, pulling out the battery, and letting it rest for 5 or 10 mins.

Sorry for not replying to anyone. Another member reuploaded the CWM community kernel for me and I got my recovery back. And I don't think Odin will ever work for me because I have the drivers installed but it still shows up as unknown in download mode. I've already tries heidnall one click to install the drivers but it doesn't install them as my phone shows up as unknown.

List of problems im having that i cant fix

Im looking for help on fixing my SGS4G.
Here is the current list of problems:
1. Phone isnt recognized when i plug it into any computer (i download all the drivers, Kies and Odin both cant find it, and 1 out of every 10 tries my computer will recognize the microsd card and treat it like a normal sd card)
2. My Dialer and Messages will open for 3-4 seconds and close without a force close screen or anything. Obviously this is really annoying :|
3. Im rooted but trying to go back to stock to redo this whole process over is becoming a pain.
4. When trying to flash a custom rom from ROM manager i get the signature verification failed message.
Im about to try the heimdall one-click package to get back to stock and see if that works...idk if it will find my phone though.
My system info:
Firmware: 2.3.6
Baseband: T959VUVKJ6
Kernal: 2.6.35.7-T959VUVKJ6-CL694130
Build: GINGERBREAD.VUVKJ6
If i manage to get back to stock/unrooted where do you guys suggest i go from there? im kind of out of the loop as far as where we are with ICS or jellybean or any of that :|
Thanks a bunch in advance and sorry if this is nooby

Also:
adb devices shows nothing :\
USBDview shows nothing for my phone...i plug it in with debugging on and all it does is charge my phone

First problem. Do not use ROM manager. Download ROM zips and flash through CWM/TWRP.
Have you tried using a different cable when connecting to PC? Some cheaper cables do not work well, or at all. I have a blackberry cable that I only use for this.
Have you tried alternate USB ports. Sometimes that may be this issue as well. Also, some people have better luck with Odin, while others have better luck with heimdall. You may want to try the alternate and see if you have the same issue.
I would follow the guides on going back to stock. You may have old conflicting drivers so you may need to completely remove old ones first.
Sent from my SGH-T959V using xda app-developers app

I use the cable that came with it and the one that comes with my girlfriends phone which is a different phone with no problems. You might want to mess with the usb configuration on your computer
Sent from my SGH-T959V

As far as the dialer and messenger app backing out automatically that was an issue with all bml gingerbread roms. I think there was a fix but I'm not sure. Cm7 is mtd based gingerbread and it doesn't have that problem.
Sent from my SGH-T959V using xda app-developers app

Jiggly,
Ive tried every USB port on my desktop and my laptop. Both of them im reinstalled the drivers on. On my desktop the moment I plug it in it says the device malfunctioned.
Usbdview didn't show anything like the guides said it should. (HTC something...there was.nothing)
ROM manager is just on my phone ive never actually used it other than to boot to recovery
Sent from my SGH-T959V using xda app-developers app

The phone goes into download mode but heimdall still doesnt detect it, windows still tells me the device cant be recognized and im out of ideas.
i went into regedit and deleted all the samsung folders and reinstalled the drivers fresh but im still not getting anywhere...

flash the blastoff kernel, or some custom GB kernel.
Let it convert to ext4, it'll take 10 minutes,
flash a rom through CWM which you will now have.

Im missing something here...but i cant flash anything as everything is unsigned and i cant get out of 3e recovery. ODIN, heimdall etc still wont find my phone from my computer(s) and everything i attempt to flash is unsigned.

Can you boot into your ROM?

boot into my rom as in use my phone? yes the phone functions fine with the exception of not being able to plug it into my computer to tether it/use mass storage and these darn auto close problems with my dialer/messages

Well i was able to flash a new kernel with CWM then upgraded to cm9.
didnt realize contact sync didnt work so i lost all that info :\ computer still says the device malfunctioned but my messaging and dialer apps dont auto close now lol

[Q] Mount USB storage under ClockWorkmod Recovery 6.0.1.0

Hello,
My phone had been experiencing a host of problems, so I formatted all partitions. (/sdcard, /system, /cache, /data, /boot)
I planned on using the "mount USB storage" to transfer a copy of CM10 to the sdcard and flash that from recovery,
but the device does not appear in my computer or device manager in windows, and Linux doesn't see it either.
In it's current state, it's soft bricked, is there anything I can do to fix it?
It now says "fastboot mode - no boot or recovery IMG", and I have no drivers to communicate with it under adb or fastboot.
Thanks,
-Max

Use this guide to recover your device.

Thanks, but my issue is that I can't install the drivers, could it be a windows 8 thing?
Everything seems to require that I enter USB debugging first, which is impossible for me now.
I think the ADB driver is impossible to install, unless I can do it over CWM, and every fastboot driver I've tried has failed too.

How did you erase everything? Was it through fastboot or CWM?

I did it through CWM. I had just recently installed Windows 8, and hadn't connected it since then so no drivers are installed.

maxmalynowsky said:
I did it through CWM. I had just recently installed Windows 8, and hadn't connected it since then so no drivers are installed.
Click to expand...
Click to collapse
In my opinion, its safer to erase everything from fastboot.
If fastboot recognizes your phone, then you can erase or install whatever you want.
If fastboot does not recognize your phone, then you can't erase it. You then need to find out why. Bad drivers, wrong folders, bad usb cable...In the meantime you phone will still work.
On my windows 7 box, under the administrator account, it took a while to set up the drivers, don't know why, but windows would not take it at first.
Maybe you can mail the phone to a xda member to get it going again...

maxmalynowsky said:
Hello,
My phone had been experiencing a host of problems, so I formatted all partitions. (/sdcard, /system, /cache, /data, /boot)
I planned on using the "mount USB storage" to transfer a copy of CM10 to the sdcard and flash that from recovery,
but the device does not appear in my computer or device manager in windows, and Linux doesn't see it either.
In it's current state, it's soft bricked, is there anything I can do to fix it?
It now says "fastboot mode - no boot or recovery IMG", and I have no drivers to communicate with it under adb or fastboot.
Thanks,
-Max
Click to expand...
Click to collapse
I am sorry to hear about your phone. You are not alone I did the exact same thing a few days ago. Don't beat yourself up I have done that enough for both of us. Through my research into this i found there a few things that you might try (I don't own a PC so I haven't yet)
To get the drivers, I read a couple people had success downloading PDANet and installing them that way. I think they are located in "legacy drivers"
From the original "root, un-root" thread for your model download the stock boot img and try to flash that using ADB
follow the instructions to un-root and start over with rooting.
I also was going to look into Wug's toolkit (in the dev section) it looks like that may be an easy option to flash a working boot and recovery img.
I hope this helps please let me know.
I gave up to quick and ordered a GNex but I'm not touching that until I get my NS4G sorted out (my faith in my abilities is shaken and I could not handle bricking a brand new phone). I will be going to a friends house tonight to use their PC and try to get my NS running. I will be back to let you known what works and what doesn't. If you try or find anything would you please post? Two heads working on this issue are better then one. Thanks and good luck.
Sent from my temp PC36100 while my Nexus is sick using Tapatalk 2

*** success ***
The solution was an easy one thanks to our developers, the hard part was finding the answer and of course, beating myself up for making the mistake in the first place. Here's what you do...
Leave your phone with the battery out for a while. Download "Wug's Nexus Toolkit" In found it in the NS4G dev section but I believe it covers all variants (not sure which you have) at the select your model and custom JB ROM download the drivers (from the actual toolkit) turn on, plug in and select flash stock img, relock boot loader, pick the stock ROM you want and press go and your phone will be flashed and reboot in under a minute. Sign in on your phone (the toolkit should auto populate your new ROM and then just follow the steps to unlock, flash and install a custom recovery then pick any ROM you want and start over.
I really hope this helps you as I'm sure you find the whole situation as stomach-churning as I did. Please PM me and let me know.
If it does work please leave a thank you or donation to the dev for creating such an awesome tool. Again, good luck hope you get your nex back online.
Sent from my Galaxy Nexus using Tapatalk 2

The Nexus Toolkit was actually my first option, it's helped me out before. I went back and tried installing the drivers using the 3 options it gives. # 3 & #2, RAW and Samsung signed drivers don't work. Option #1, the PDAnet drivers didn't work last time I tried it (all 3 options require USB debugging enabled). However, I just tried #1 again by turning on the device in CWM and that seemed to work, but I'm not sure (installation went according to the guide). However, once I tried to flash stock img, it gave me errors about not being able to reach the device in fastboot. Can you elaborate on those two steps, driver installation and flashing? As soon as I can get fastboot to recognize my device I can pretty much take it from there. BTW, I've got a i9020A and using NRT 1.6.1; and what's the significance of leaving the phone with the battery out for a while?

Mine was in the box with the battery out overnight. When I had access to a PC and plugged it in it said something at the bottom of the fastboot screen in grey that it did not before and I actually think that was the trick (System normal or system OK or something like that and when replugged to the USB the message just repeated and stacked up on the lower left of the fastboot screen). Try letting the phone sit for a while. All driver options failed for me except the tool kit.
Sent from my Galaxy Nexus using Tapatalk 2

Tried your fix, but the phone remains unable to have it's drivers installed. It's always giving "USB device not recognized" errors no matter what I do. I'm just going to shelf it and accept my loss. Thanks for the help though!
edit: Tried using some Linux tools, much greater success! This guide finally got my device listed under fastboot: http://forum.xda-developers.com/showthread.php?t=1447040
edit2: Up and running again with the android-tools-fastboot package for Linux and a standard stock image flash: http://forum.xda-developers.com/showthread.php?t=1572307

I am so glad to hear it! I stayed subscribed to the nexus s forum just to keep up on your progress and to try and help. Good for you.
Sent from my Galaxy Nexus using Tapatalk 2

[Q] I've tried everything to get out of boot loop

Hello everybody,
I am new to the forum and also new to Androids. After years of using iPhones and finally becoming fed up Apple, I've decided to try something new (please don't judge my prior smartphone selection and start posting opinions about the 2 operating systems, I do not want this thread to turn into one of the "battle of the phones" thread that I've experienced many times on iPhone forums). My friend recently got an S3 and had no use for his Galaxy S 4g, so he gave it to me so that I could try out an Android. There was one issue though, he said that the phone would not get past the Galaxy S screen and would keep re-booting itself (stuck in a boot loop). He said if I could figure out a way to fix it then it's mine.
That being said, here's my dilemma. I've tried many different methods to get the phone out of a boot loop. The first method I tried was putting the phone into restore mode and selecting the "reinstall packages" option. After this executes I get the message:
E:Can't mount /dev/block/mmcblk0p1
(no such file or directory)
E:Can't mount SDCARD:update.zip
Installation aborted.
After some further research I discovered a nice little program called Odin I read a lot about Odin and how to properly use it. After trying at least 5 different methods to get the phone into download mode with no success, I purchased a jig. The jig did the trick and instantly put me into download mode, I was ecstatic and hopeful that I could now fix the phone with Odin. I connected the phone to my PC in download mode, but Odin still didn't recognize the phone (I tried many versions of Odin, 1.85, 1.87, and the most recent 3.07). I do have the latest drivers for this phone, which I downloaded from Samsung's website. The phone will charge through the computer but the computer does not recognize it otherwise and will not allow me access its mass storage (I am running Windows 7 64 bit). I have tried using a different USB cable, and I have tried to use a different PC, the other PC I used popped up with a message saying that Windows could not successfully download the drivers (that was after I downloaded the drivers from Samsung's webpage and plugged the phone into the computer). I've even tried transferring stock firmware onto an external SD card and loading it onto the phone from restore mode (is that even possible to do?). I have also tried running Odin in compatibility mode, still didn't detect the phone. I should probably also mention that Kies Mini also does not recognize the phone. I asked my friend if he ever tried rooting this phone and he said no, so I'm assuming this issue has nothing to do with a failed attempt to root.
I really want to get this phone working, but I have run out of options to try. I am hoping that someone on here has a solution for me from a similar experience. After reading through the forum, I have noticed that people on here are very helpful and also very friendly; something that I can say is very different from some of iPhone forums I've used. I apologize if there is already a similar thread to mine, I've read through many threads and none of the solutions have worked for me. I also apologize for my first post being so lengthy, I just wanted to state all of the methods that I've tried to fix this phone. Thanks for your replies.

Hi hubbs134
You have come to the right place.
First,
I suggest you read a little bit about this phone and how to put it in Recovery (by holding Volume Up + Volume Down + Power until you see the SGS4G splash screen) and Download modes, it will help you in the future.
You can find it all in the Wiki.
Second, use this guide to One-Click Heimdall your way to Stock KJ6 2.3.6 Gingerbread ROM (latest official ROM for this phone).
If you use this file (instead) with that guide, you will also get phone rooted, or else you will need to make another flash of a rooted kernel (as the guide suggests).
Now, if you have the official latest stock, but still want some ICS/JB lovin', if you have CWM recovery v5 (you will see the recovery info once you're in that mode), you can flash CM9/AOKP/HebMIUI/UltraGen/RemICS/CM10/Slimbin/etc. etc. etc. ROMs.
Enjoy and welcome aboard!
P.S what the @#%#$ were you doing with an iphone ?

itzik2sh said:
Hi hubbs134
You have come to the right place.
First,
I suggest you read a little bit about this phone and how to put it in Recovery (by holding Volume Up + Volume Down + Power until you see the SGS4G splash screen) and Download modes, it will help you in the future.
You can find it all in the Wiki.
Second, use this guide to One-Click Heimdall your way to Stock KJ6 2.3.6 Gingerbread ROM (latest official ROM for this phone).
If you use this file (instead) with that guide, you will also get phone rooted, or else you will need to make another flash of a rooted kernel (as the guide suggests).
Now, if you have the official latest stock, but still want some ICS/JB lovin', if you have CWM recovery v5 (you will see the recovery info once you're in that mode), you can flash CM9/AOKP/HebMIUI/UltraGen/RemICS/CM10/Slimbin/etc. etc. etc. ROMs.
Enjoy and welcome aboard!
P.S what the @#%#$ were you doing with an iphone ?
Click to expand...
Click to collapse
Thanks for your reply, I have read a lot about this phone and know how to get into download and recovery mode. I tried the method you mention, however, when running the command window I get errors for both roms you suggested (i attatched a screen shot of the errors I'm getting). Do you know how I can fix these errors so that I can proceed with the rest of the tutorial? Thanks.
PS I only had an iPhone because I had yet to discover how bad a** Androids are

It sounds like you can't use Odin because of a windows issue. Try installing linux. I use ubuntu
Sent from my HTC One X+ using xda app-developers app
---------- Post added at 07:48 AM ---------- Previous post was at 07:47 AM ----------
You can also run as live CD or in a virtual machine
Sent from my HTC One X+ using xda app-developers app

hubbs134 said:
Thanks for your reply, I have read a lot about this phone and know how to get into download and recovery mode. I tried the method you mention, however, when running the command window I get errors for both roms you suggested (i attatched a screen shot of the errors I'm getting). Do you know how I can fix these errors so that I can proceed with the rest of the tutorial? Thanks.
PS I only had an iPhone because I had yet to discover how bad a** Androids are
Click to expand...
Click to collapse
No need to replace PC OS...
1. Uninstall all your Java versions and Samsung drivers and reboot.
2. Reinstall Java 1.7u..
3. Follow the guide, it should work.
When you reinstall the driver through Heimdall - it will appear as Gadget device.
Good luck !

itzik2sh said:
No need to replace PC OS...
1. Uninstall all your Java versions and Samsung drivers and reboot.
2. Reinstall Java 1.7u..
3. Follow the guide, it should work.
When you reinstall the driver through Heimdall - it will appear as Gadget device.
Good luck !
Click to expand...
Click to collapse
I second this... This should fix your driver issues.

Thanks for both of your replies. Odin detected my friends GS3 so I know it's not a Windows issue.
itzik2sh I did what you suggested and now got the command to function properly. I am going to try and finish the tutorial, I will be back soon with results. Thanks.

The phone is in download mode with Heimdall One-click 1.3.1 running and nothing is popping up in the command window. Neither is showing that the device is connected. Any suggestions? Thanks

Irish Enigma said:
I second this... This should fix your driver issues.
Click to expand...
Click to collapse
I forgot to mention that I can here the sound that a device was just connected to the computer via USB, and a message pops up saying USB device not recognized. When I click on the message it says "One of the USB devices connected to this computer has malfunctioned, and Windows does not recognize it."

Tried a different port? Tried second different port with a different USB cable?

itzik2sh said:
No need to replace PC OS...
1. Uninstall all your Java versions and Samsung drivers and reboot.
2. Reinstall Java 1.7u..
3. Follow the guide, it should work.
When you reinstall the driver through Heimdall - it will appear as Gadget device.
Good luck !
Click to expand...
Click to collapse
Theraze said:
Tried a different port? Tried second different port with a different USB cable?
Click to expand...
Click to collapse
Ok I got the device connected and I got Zadig running, however, there is no option for "Samsung USB Composite Driver" on the drop down list, on "gadget Serial", "Gadget Serial Control (interface 0), and "1.3 HD Webcam (Interface 0)'. What should I do?

On the one-clicks, you don't actually want to use zadig. Apparently it conflicts, which is awesome for something that gets released WITH the tool.
If you're doing manual Heimdall, make sure you've told zadig to list all devices in the menus. Your phone should show up after that.
If you're using a one-click, make sure you're using a USB port on your computer where you have NOT installed zadig, Kies, or Samsung official drivers. Follow the steps in the one-click religiously, and it should cooperate.

Follow the guide %100 then Odin should work
Sent from my HTC One X+ using xda app-developers app

Ok I ended up getting the phone to register in Odin. I flashed it with the stock rom in Odin and it said success. The phone booted and it seemed like it was going to work but then the recovery menu came up. I posted a screen shot of what it says, what action should I take from here? Thanks

I am also in a different boot loop now, before it would load to the first screen (black screen saying samsung galaxy 4g) then restart, now it boots to past the splash screen to where it says "Samsung" and then reboots back to the screen where the pink letters roll across the whole screen. I don't need to flash bootloaders do I?

Looks like recovery is broken or the updater script on the ROM you're trying to flash is messed up. Flash a new and the proper recovery via Odin then download a new Rom and either sideload it or mount usb from recovery and push it... Or you could just use Odin XD
EDIT: Samsung's are easy to brick and hard to debrick it may take a couple of trys
Sent from my HTC One X+ using xda app-developers app

Irish Enigma said:
Looks like recovery is broken or the updater script on the ROM you're trying to flash is messed up. Flash a new and the proper recovery via Odin then download a new Rom and either sideload it or mount usb from recovery and push it... Or you could just use Odin XD
Sent from my HTC One X+ using xda app-developers app
Click to expand...
Click to collapse
OK GREAT NEWS! After flashing with Odin and that screen popping up, I clicked update from SD card, which failed. I then click system reboot, which brought me into the new boot loop. I put back into download mode and re-flashed with One-Click. Same recovery menu came up as before but when I clicked reboot system it hung at the "Samsung" black screen (after the splash screen) for about 20-30 seconds and then booted up I'm afraid to turn the phone off and see if it reloads lol. Is it safe to say that it is fixed? Or should I still follow your advice and run the proper recovery in Odin and then sideload a new rom? Or take different action? Thanks for all your help guys! Everyone gets a thanks click for being so helpful and friendly on an unhappy/confused/pissed off/ now happy new Android user!

Ok I just put my Tmobile simcard in and the phone is not detecting the sim. Any suggestion?

The IMEI number and baseband both say "unknown", I'm assuming this has to do with the simcard not registering?

hubbs134 said:
The phone is in download mode with Heimdall One-click 1.3.1 running and nothing is popping up in the command window. Neither is showing that the device is connected. Any suggestions? Thanks
Click to expand...
Click to collapse
What Heimdall package are you applying ?
After JAR package runs you are ready to go.
As I wrote, according to guide you can reinstall "Gadget" driver.
EDIT :
Enigma, if you're not an owner of an SGS 4G please stop advising.
Odin is not the common way since we have MTD ROMs and it had its problems.
hubbs134,
blank IMEI is a serious problem. without a proper IMEI your device is everything but a phone.
Try this : take battery off, press the POWER button for 10 seconds, leave device untouched for 15 minutes and then put battery back and power up.
This could bring your IMEI back to life. If not... maybe another flash will help.
P.S
The 3e recovery image you put on post #14 is a snapshot of the the stock unrooted ROM recovery.