I'm using this guide to try and root a Galaxy S3 (I535VRLHE) with the ultimate goal of installing CM10, and unfortunately hitting a wall very early on. I'm using Root Debug FS to try and root, but I'm getting the error:
"adb is not recognized as an internal or external command, operable program or batch file."
After that it informs me that "UID and GID should both be 0" Are They? Y/N.
Saying Yes or no here does nothing but insist that my phone is successfully rooted (it isn't). Screenshots attached.
I've searched the forums and have seen this problem, but in most instances it's because users were trying to run RootDebugFS from within a zip, or they hadn't unzipped the files properly. My files are all extracted to the same directory and adb.exe is there. Drivers were all installed correctly. USB cable is OEM. Phone is set to USB debug mode, and unknown sources are allowed.
Any ideas what I'm missing?
Did you install Samsung drivers?
Sent from my SCH-I535 using xda app-developers app
---------- Post added at 05:33 PM ---------- Previous post was at 05:31 PM ----------
Try this link it is a little more extensive.
http://forum.xda-developers.com/showthread.php?p=28530394
Hope this helps.
Sent from my SCH-I535 using xda app-developers app
Droopydroors said:
Did you install Samsung drivers?
Sent from my SCH-I535 using xda app-developers app
---------- Post added at 05:33 PM ---------- Previous post was at 05:31 PM ----------
Try this link it is a little more extensive.
http://forum.xda-developers.com/showthread.php?p=28530394
Hope this helps.
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
Yes, installed Samsung drivers without a problem. Also searched and found that guide, but still get the same error whether I'm using the originally suggested RootDebugFS, or the SuperSU RootDebugFS they suggest.
What version are you on under about phone. And I would re download all the files from the thread I sent you. Could be a bad download that you have.
Sent from my SCH-I535 using xda app-developers app
---------- Post added at 06:03 PM ---------- Previous post was at 05:59 PM ----------
There should be a total of 3 adb files, 3 debug files and 3 superuser files in the download. Are there?
Sent from my SCH-I535 using xda app-developers app
Droopydroors said:
What version are you on under about phone. And I would re download all the files from the thread I sent you. Could be a bad download that you have.
Sent from my SCH-I535 using xda app-developers app
---------- Post added at 06:03 PM ---------- Previous post was at 05:59 PM ----------
There should be a total of 3 adb files, 3 debug files and 3 superuser files in the download. Are there?
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
Android version 4.04, baseband version I535VRLHE, build number IMM76D,I535VRALHE. All the files appear to be in there (see screenshot). Should note that I've tried this on a Windows 7 laptop AND desktop and have seen the same results, so that suggests it's a phone setting or conflict I'm missing?
HaiLe512 said:
It is homescreen plusplus which used to be batterystatus. you can search for it in XDA forum.
I used UI tweak and changed the separation line to blk and it is good.
Thanks,
HaiLe
Click to expand...
Click to collapse
You are missing a file that is called
SuperSu_GS3_Debugfs_r2a
File size for that file should be 1103KB
So I would try redownloading the pack in the tread I sent you.
Sent from my SCH-I535 using xda app-developers app
Droopydroors said:
You are missing a file that is called
SuperSu_GS3_Debugfs_r2a
File size for that file should be 1103KB
So I would try redownloading the pack in the tread I sent you.
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
Re-downloaded the file from the link you provided (image 1), extracted, and the file you cite is not there. Downloaded the other straight version of DebugFS (image 2) again and I still get the same error on two different machines.
OK...... well I'm stuck. That's everything I could think of. Hopefully someone with more knowledge will help you out.
Sorry
Sent from my SCH-I535 using xda app-developers app
Droopydroors said:
OK...... well I'm stuck. That's everything I could think of. Hopefully someone with more knowledge will help you out.
Sorry
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
Thank you for trying. Do I have other root options if I simply can't get this program to work?
Not that I'm aware of. I'm sure someone will be able to help. I see if I can get someone too look into it from a different thread.
Sent from my SCH-I535 using xda app-developers app
I've tried this on three different PCs, so I assume it's something to do with the phone. Can anyone lend a hand?
I am also having the same problem. I have tried all of the suggestions in multiple guides and forums, still not happening.
Edit/Update: I was finally able to root. I did not run the debug as administrator and it worked perfect. Maybe this will help someone else.
nickmimi said:
I am also having the same problem. I have tried all of the suggestions in multiple guides and forums, still not happening.
Edit/Update: I was finally able to root. I did not run the debug as administrator and it worked perfect. Maybe this will help someone else.
Click to expand...
Click to collapse
I've run it as administrator, but still get the same problem. Very frustrating. Nobody else has any ideas I could try to get this to work?
TheShakes said:
I've run it as administrator, but still get the same problem. Very frustrating. Nobody else has any ideas I could try to get this to work?
Click to expand...
Click to collapse
Also: I've now tried this on two PCS and a laptop and get the same error...so it's something with the phone itself....
TheShakes said:
Also: I've now tried this on two PCS and a laptop and get the same error...so it's something with the phone itself....
Click to expand...
Click to collapse
I THINK he's saying "DONT run it as Administrator. "
I have the same version phone, I ran as administrator the first time, didnt work.
Had the same problem as you did.
Second time I ran it as I regularly would, worked like a charm.
blakeharrell said:
I THINK he's saying "DONT run it as Administrator. "
I have the same version phone, I ran as administrator the first time, didnt work.
Had the same problem as you did.
Second time I ran it as I regularly would, worked like a charm.
Click to expand...
Click to collapse
That was it, thanks!
For people finding this via Google, do NOT run it as administrator like most guides suggest.
blakeharrell said:
I THINK he's saying "DONT run it as Administrator. "
I have the same version phone, I ran as administrator the first time, didnt work.
Had the same problem as you did.
Second time I ran it as I regularly would, worked like a charm.
Click to expand...
Click to collapse
how do u run it without being an admin
im having the same problem as the OP
Run As Admin correct steps
I had the same problem and resolved it by running the RootDebugfs.bat file in an command window run as administrator.
For win7 - 1) type cmd in the find box 2) a black cmd program icon appears at the top - right click it and choose run as administrator 3) from inside the command window navigate to where you unzipped the root fs program and run it. For example, type cd c:\some directory\RootDebugfs.bat
Related
hello,
i have tried lots and lots of downloads for the SuperOneClick and none of them work i keep getting this message when the download box appears. Please help
Thank you
v/r
MonteCarlo28s
C:\Users\My Computer\Downloads\SuperOneClickv2.3.3-ShortFuse.zip.part could not be saved, because the source file could not be read.
Try again later, or contact the server administrator.
What are you trying to accomplish? just a root?
Sent from my SGH-T959V using xda premium
When it has .part on the end of the file name it means it did not finish downloading. Have you gone to shortfuse's website for a direct download link?
yes i want to root my phone here are the specs
firmware is 2.3.6
phone samsung galaxy s 4g (t mobile)
kernel 2.6.35.7 kj6
build number Gingerbread kj6
all of this is came on the phone when i bought it from tmobile.
i went to shortfuse to get the direct download took me to deposit files and download box appeared and i got this message
C:\Users\My Computer\Downloads\SuperOneClickv2.3.3-ShortFuse.zip.part could not be saved, because the source file could not be read.
Try again later, or contact the server administrator.
I am using firefox idk if that has anything to do with it.
im new to this whole thing and want to root the phone so i can start doing things with it.
I will post a link for you.
Here you go - http://db.tt/bNYoJw6T
Also review the guides in the first and second link of my signature for more helpful information.
ok thanks.
Oops... I uploaded the older version. It will still work but I will go ahead and upload 2.3.3 for you.
Same Error Message.
Then restart your computer. If that doesn't work. Try Internet Explorer or Chrome. Something is wrong on your end. That is my personal dropbox folder. I know it works.
---------- Post added at 08:16 PM ---------- Previous post was at 08:03 PM ----------
2.3.3 link is above.
.
Sent from my PG86100 using xda premium
Just a quick suggestion. Try disabling the virus scan on downloads in Firefox then try downloading it. I seem to recall having a similar problem a while ago with something I was downloading.
Don't forget to re-enable it after though lol
Sent from my U8180 with style ^_^
thanks for the suggestions guys but i guess its not ment for me to root nothing has worked.
* couldn't download to the pc so i went on the web on my phone and downloaded the file then transfered it to my pc. back in business*
Or... You can flash a custom ROM/kernel, that would get you root
Sent from my SGH-T959V using xda premium
MonteCarlo28s said:
Same Error Message.
Click to expand...
Click to collapse
I rooted my Galaxy S 4g with SuperOne Click. I will give you the link to download it later im at school. Not sure if its really 2.3.3. But it should still work and if it works you will get a new app called superuser.
He was able to download and root.
lumin30 said:
He was able to download and root.
Click to expand...
Click to collapse
Can you post the link here please?
wiener20 said:
Can you post the link here please?
Click to expand...
Click to collapse
http://www.oneclickroot.com/phone/samsung-galaxy-s/
Sent from my SAMSUNG-SGH-I547 using xda app-developers app
Hello all,
Can someone be so kind as to upload the new optimum app for kindle fire? I just got the e-mail that it was just released and it would allow you to watch live TV on your Kindle Fire. I want to see if it will work on other Android devices.
Thank you!
yes please ... I cant seem to find it anywhere
---------- Post added at 10:42 PM ---------- Previous post was at 10:37 PM ----------
NM ... thanks Josepho
Here it is: https://www.dropbox.com/s/c7ld876le6...r.mobile-1.apk
omkar62 said:
yes please ... I cant seem to find it anywhere
---------- Post added at 10:42 PM ---------- Previous post was at 10:37 PM ----------
NM ... thanks Josepho
Here it is: https://www.dropbox.com/s/c7ld876le6...r.mobile-1.apk
Click to expand...
Click to collapse
Thanks but it says invalid link...
Sent from my SPH-D710 using xda app-developers app
mikelav456 said:
Thanks but it says invalid link...
Sent from my SPH-D710 using xda app-developers app
Click to expand...
Click to collapse
yea lets get this ball rollin
post a good link
mikelav456 said:
Thanks but it says invalid link...
Sent from my SPH-D710 using xda app-developers app
Click to expand...
Click to collapse
Try this. Btw did not work on my Touch pad running CM9. YMMV.
https://www.box.com/shared/ba32e24f584354104f46
thanks for getting the right link. the app installs fine on my viewsonic gtablet, however, when I try to login, I get an unsupported device error.
Can someone get the right build.prop to spoof the build fingerprint and the model name? ... maybe that fixes the issue?
skipster said:
Try this. Btw did not work on my Touch pad running CM9. YMMV.
https://www.box.com/shared/ba32e24f584354104f46
Click to expand...
Click to collapse
you think editing our build.prop to kindle fire will make it work?
i remember doing that to make our phones think it was an htc to get the free 50gb's of dropbox a while back
i get it to open up on my xoom on cm9 but then it says unsupported device type
PC Jona said:
you think editing our build.prop to kindle fire will make it work?
i remember doing that to make our phones think it was an htc to get the free 50gb's of dropbox a while back
i get it to open up on my xoom on cm9 but then it says unsupported device type
Click to expand...
Click to collapse
Same here on Nexus One running CM7
solidmac said:
Same here on Nexus One running CM7
Click to expand...
Click to collapse
so what do we do a build.prop edit? which is the right one for the kindle fire?
Thank you! It works on the Nexus 7.
ayellen said:
Thank you! It works on the Nexus 7.
Click to expand...
Click to collapse
lucky!
also tried on my tmo sgs2 on cm9.... no go
PC Jona said:
lucky!
also tried on my tmo sgs2 on cm9.... no go
Click to expand...
Click to collapse
Not working on the Xoom... looking at the source, appears difficult to "fix"...
It only works on the Nexus 7 the first run after installation after it asks you to log in. Once you close the app you have to reinstall it in order to use it again. Otherwise you get the unsupported device error. Maybe if you log out after each use it will work?
skipster said:
Try this. Btw did not work on my Touch pad running CM9. YMMV.
https://www.box.com/shared/ba32e24f584354104f46
Click to expand...
Click to collapse
Why is it asking for root access?
Josepho1997 said:
Does this link work?
http://db.tt/oj52tw9x
Sent from my Kindle Fire using xda premium
Click to expand...
Click to collapse
Yes it works but also asks for root...
Pesceman3 said:
It only works on the Nexus 7 the first run after installation after it asks you to log in. Once you close the app you have to reinstall it in order to use it again. Otherwise you get the unsupported device error. Maybe if you log out after each use it will work?
Click to expand...
Click to collapse
Not log out, but if you clear the data (which then requires you to log in again).
Works on my gtablet .... however needed to go back to froyo (beastly-clemsyn) from DRH ICS. Same behaviour as observed by others -- need to clear data before each login otherwise get the unsupported device screen
Is there no build.prop fix for this?
Sent from my SPH-D710 using xda app-developers app
Any fix yet?
unique311 said:
Any fix yet?
Click to expand...
Click to collapse
i wish -_-
Edited 8/20/2012: Please go to THIS THREAD for further updates as continued development is taking place here and newer info is now available.
I made a flashable zip for Google Now based on This Thread
Theres a lot of different methods and files out there but some of the other methods dont seem to work for everyone. This one has worked for me and some others on ViperS rom specifically, and made it flashable for a very easy installation. Should work on all ics roms.
Note: Sorry for any issues earlier, hope all is fixed now.
1. MAKE A BACKUP BEFORE ANYTHING JUST TO BE SAFE.
2. Flash Away.
Flashable Zip - V2 (FIXED)
Google Now ICS
More Mirrors
One more for good measure
Video
Google Now on Youtube
For Commands and extra Info.
Go To This Thread
additionally
How to impress your friends: 40+ voice searches on Jelly Bean
I merely used different resources to make this as easy as possible so I give credit and thanks to all involved, especially Mikeyxda as I edited his updater script to fix my flash file and Lenny_kano for his work on this.
Enjoy :good:
File looks corrupted. Returns error 0 when attempting to flash. Tried several mirrors.
ckjy said:
File looks corrupted. Returns error 0 when attempting to flash. Tried several mirrors.
Click to expand...
Click to collapse
I thought I fixed this. I updated the mirrors so you may have the original corrupted file. The new file should be labeled SIGNED at the end. Make sure to delete google quicksearchbox from your system also beforehand. I reverted to a backup, and followed the above steps without issues.
Hope it works now!
Let me know
Worked for me.
Thanks!
knuddeknurft said:
Worked for me.
Thanks!
Click to expand...
Click to collapse
No problem
Zip flashed ok but when I push search button still takes me to "old" Google search...
Am I missing some step in between?
durius said:
Zip flashed ok but when I push search button still takes me to "old" Google search...
Am I missing some step in between?
Click to expand...
Click to collapse
Delete the old google quick search app. Flash and then long press search button for voice commands.
Sent from my HTC Sensation 4G using xda app-developers app
The Illest 619 said:
Delete the old google quick search app. Flash and then long press search button for voice commands.
Sent from my HTC Sensation 4G using xda app-developers app
Click to expand...
Click to collapse
If someone was able to down load a file that is not corrupt please post a mirror , i have tried just about every one posted and no luck so far . i am sure thousands of people will appreciate it ..thanks from many ...
deerkiller said:
If someone was able to down load a file that is not corrupt please post a mirror , i have tried just about every one posted and no luck so far . i am sure thousands of people will appreciate it ..thanks from many ...
Click to expand...
Click to collapse
Whats the name of the file? The original file was corrupted but the ones up now should be fine. The new file should say signed.zip at the end. I flashed it without issues. I'll try downloading and checking again in case the file was corrupted during file transfer.
Sent from my HTC Sensation 4G using xda app-developers app
first time flashing i got the 0 error. then tried again and it installed...
trying now will report back in a bit
dextninja said:
first time flashing i got the 0 error. then tried again and it installed...
trying now will report back in a bit
Click to expand...
Click to collapse
Weird how it works and sometimes it doesn't. I'll make a fresh install when I get home.
Sent from my HTC Sensation 4G using xda app-developers app
The Illest 619 said:
Whats the name of the file? The original file was corrupted but the ones up now should be fine. The new file should say signed.zip at the end. I flashed it without issues. I'll try downloading and checking again in case the file was corrupted during file transfer.
Sent from my HTC Sensation 4G using xda app-developers app
Click to expand...
Click to collapse
they all say multiupload.biz .....all have (signed) before the ending , i tried every one and i even tried to unrar and then re rar it again but when i do that the phone does not see the file i made with winrar
---------- Post added at 08:46 PM ---------- Previous post was at 08:41 PM ----------
The Illest 619 said:
Weird how it works and sometimes it doesn't. I'll make a fresh install when I get home.
Sent from my HTC Sensation 4G using xda app-developers app
Click to expand...
Click to collapse
yes please do because i really don't want to throw my sensation across the house ....frustrating to say the least mate ...but thanks for posting i really do appreciate that , now if i can get it to work witch i am sure it will when i get a uncorrupted file .:good:....update i just kept trying over and over to flash and finally it took ...WTF?..i would still maybe work on updating or re zipping the file ...thanks....well i tried it and it crashes ..back to the drawing board damn it !!!
deerkiller said:
they all say multiupload.biz .....all have (signed) before the ending , i tried every one and i even tried to unrar and then re rar it again but when i do that the phone does not see the file i made with winrar
---------- Post added at 08:46 PM ---------- Previous post was at 08:41 PM ----------
yes please do because i really don't want to throw my sensation across the house ....frustrating to say the least mate ...but thanks for posting i really do appreciate that , now if i can get it to work witch i am sure it will when i get a uncorrupted file .:good:....update i just kept trying over and over to flash and finally it took ...WTF?..i would still maybe work on updating or re zipping the file ...thanks....well i tried it and it crashes ..back to the drawing board damn it !!!
Click to expand...
Click to collapse
Wipe cache and davilk? I'll check everything out when I get to my computer. Shouldnt crash unless you don't have ics. I'm on sense 4 also.
Sent from my HTC Sensation 4G using xda app-developers app
Will not install, error code 0. Tried 4 or 5 different downloads. No dice.
tks got it work XDDDD
Cool. Now to just get it working for everyone.
Sent from my HTC Sensation 4G using xda app-developers app
nvm i figured it out
works! :good:
its 100% working, tested for a couple minutes :good::good::good:
qnra said:
I need help
What do i do with META-INF folder?
Click to expand...
Click to collapse
Nothing at all. Leave it as is. You can try flashing the zip through 4ext or extract the system folder in root explorer and paste it to the root of your phone and merge contents. Reboot.
Sent from my HTC Sensation 4G using xda app-developers app
Thanks for posting this. I got GNow working on my Sensation (Running ARHD) yesterday by following the instructions found here
http://forum.xda-developers.com/showpost.php?p=29756226&postcount=2856
I downloaded "mikeyxda APK version 2" Offline/online. It's easier to get working and doesn't require any deleting. Just a simple flash via recovery, confirmation of settings through a file manager and you're good to go.
Hope this helps anyone else. Screenshot attached for good measure.
Is this working for anyone? I have searched the know issues logs and read a huge chunk of the development forum and I can't find any information about whether it works or not, for me currently it does not. I know it's probably not used very much by other people but I use it quite a bit and would greatly appreciate some help on whether it works or how to get it to work?
Sent from my SAMSUNG-SGH-I727 using xda premium
Create an entry called "ro.HDMI.enable" with the value "true"
I use ROM Toolbox Pro for this every time I flash a new nightly
Sent from my SAMSUNG-SGH-I727 using xda premium
Thanks that worked perfectly.
Sent from my SAMSUNG-SGH-I727 using xda premium
burgeswe said:
Create an entry called "ro.HDMI.enable" with the value "true"
I use ROM Toolbox Pro for this every time I flash a new nightly
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
How do you add this command using ROM toolbox Pro?
---------- Post added at 01:57 PM ---------- Previous post was at 01:22 PM ----------
I figured it out. You have to go to Build.prop editor within Romtoolbox Pro to add this entry.
ickensai said:
How do you add this command using ROM toolbox Pro?
---------- Post added at 01:57 PM ---------- Previous post was at 01:22 PM ----------
I figured it out. You have to go to Build.prop editor within Romtoolbox Pro to add this entry.
Click to expand...
Click to collapse
Of course
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Izbsleepy said:
Thanks that worked perfectly.
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
What version of CM10 were you using?
I'm on the latest stable build, and I tried this and had no luck
(HDMI out worked on jellybean leak.)
Is their any other way to get it working?
---
Edit:
changed HDMI to hdmi, and cleared cache(x2)/dalvik cache
I was useing cm 10 and it works perfectly . Just download rom tool box go to build prop editor touch the plus sign find ro.hdmi then I the value section select true. Also make sure you reboot as it does not always ask you to.
Sent from my SAMSUNG-SGH-I317 using xda premium
Izbsleepy said:
I was useing cm 10 and it works perfectly . Just download rom tool box go to build prop editor touch the plus sign find ro.hdmi then I the value section select true. Also make sure you reboot as it does not always ask you to.
Sent from my SAMSUNG-SGH-I317 using xda premium
Click to expand...
Click to collapse
this ^^^
burgeswe said:
Create an entry called "ro.HDMI.enable" with the value "true"
I use ROM Toolbox Pro for this every time I flash a new nightly
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
Is it possible to edit /system/build.prop by a text editor?
I did that, I rebooted the device, but HDMI is still not working.
Does it needs to be compiled or something like tat?
Thank you in advance
HDMI alone work in roms 4.1.2.....:thumbup:
Sent from my SAMSUNG-SGH-T989 using xda premium
Same question
tembares said:
Is it possible to edit /system/build.prop by a text editor?
I did that, I rebooted the device, but HDMI is still not working.
Does it needs to be compiled or something like tat?
Thank you in advance
Click to expand...
Click to collapse
I was asking myself the same question. Everyone talking about this in different threads mention prop editors like ROM Toolbox Pro, so maybe you need to use one of them.
Yeah text is text but you know, nobody ever wrote "Just edit the file with any text editor.."
Is that because Android is Linux / Unix based and editing the file with a text editor could put ^M at the end of each line causing some weird bugs?
Read it
Izbsleepy said:
Is this working for anyone? I have searched the know issues logs and read a huge chunk of the development forum and I can't find any information about whether it works or not, for me currently it does not. I know it's probably not used very much by other people but I use it quite a bit and would greatly appreciate some help on whether it works or how to get it to work?
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1989501
Here is the new way to disable powersaver icon without using xposed as now we r s-off unlocked on All sense Lollipop builds.
Download Android terminal emulator in play store
Open terminal
Type su to grant super user
Next type the command below
pm disable com.htc.htcpowermanager/.powersaver.PowerSaverNotificationReceiver
Make sure to use capital letters where I did
Also I did it with powersaver turned off then after I disabled it I turned on powersaver. Icon will be gone.
If this helped you please hit the thanks button.
Thanks to @DucatiMon for testing on different Roms.
Screenshots r from KitKat. Will update those asap.
Sent from my HTC6525LVW using XDA Premium 4 mobile app
Where is terminal type su at?
P2o8wer said:
Where is terminal type su at?
Click to expand...
Click to collapse
https://play.google.com/store/apps/details?id=jackpal.androidterm
Oh OK. I thought that's what I had to do thanks bro.
P2o8wer said:
Where is terminal type su at?
Click to expand...
Click to collapse
Install Android Terminal emulator (or similar) from the Play Store. Open it, now you have a terminal command line. Type su and proceed....
skokielad said:
Install Android Terminal emulator (or similar) from the Play Store. Open it, now you have a terminal command line. Type su and proceed....
Click to expand...
Click to collapse
I got it thanks.
P2o8wer said:
I got it thanks.
Click to expand...
Click to collapse
cool, sorry for the dup answer. neil snuck his in before I hit submit
I will fix the Op to make it easier to follow once I home I threw it up real quick as I was rolling one on break.
Feel free to hit the thanks button if I helped.
Sent from my HTC6525LVW using XDA Premium 4 mobile app
I will also pos the way to change it without using app(system has to be rewrite to do it the way I know how.
Sent from my HTC6525LVW using XDA Premium 4 mobile app
Does anyone know what HTC setting number powersave is? I would like to enable it by using Sq editor and changing the values for quick_settings_items. So that powersave can be a toggle in quick settings. Any help in finding the number would also be appreciated.
Sent from my HTC6525LVW using Tapatalk
Nope, didn't work for me. I even tried a soft boot after so I wouldn't loose root.
Tigerstown said:
I was waiting till the system was rewrite before I posted how to turn on power saver but since it's out there already I can share this.
In terminal type su
This next part is case sensitive
pm disable com.htcpowermanager/powersaver.PowerSaverNotificationReceiver
Then reboot. It will work for sure when system is rewrite so it might work now for those you used app to turn on power saver.
I saved this from my evolte days.
I also used same method on my m7
If this helped you please hit the thanks button.
Sent from my HTC6525LVW using XDA Premium 4 mobile app
Click to expand...
Click to collapse
smiley4017 said:
Nope, didn't work for me. I even tried a soft boot after so I wouldn't loose root.
Click to expand...
Click to collapse
. In 4 years I never have had it not work. You put the capital letters where I said to? Did it not work for anyone else?
I never just had root before without system rewrite able. But it should still work. It definitely is the way to get rid of the icon.
Sent from my HTC6525LVW using XDA Premium 4 mobile app
Didn't work for me the first time I tried it, and I haven't gotten around to trying it again.
neilrl79 said:
Didn't work for me the first time I tried it, and I haven't gotten around to trying it again.
Click to expand...
Click to collapse
Ok I'll check once home from work . Could be cause of write protection. Either way I know another way to turn it off.
Sent from my HTC6525LVW using XDA Premium 4 mobile app
Tigerstown said:
. So I guess try again. I just provide the way. In 4 years I never have had it not work. You put the capital letters where I said to? Did it not work for anyone else?
I never just had root before without system rewrite able. But it should still work. It definitely is the way to get rid of the icon.
Sent from my HTC6525LVW using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yeah, didn't work here either.
Ok give me a few hours I'll post fix.
Sent from my HTC6525LVW using XDA Premium 4 mobile app
Nilius17 said:
Yeah, didn't work here either.
Click to expand...
Click to collapse
neilrl79 said:
Didn't work for me the first time I tried it, and I haven't gotten around to trying it again.
Click to expand...
Click to collapse
smiley4017 said:
Nope, didn't work for me. I even tried a soft boot after so I wouldn't loose root.
Click to expand...
Click to collapse
Sent from my HTC6525LVW using XDA Premium 4 mobile app
Deleted
Before. Sorry don't know why my last pic won't show up..
Sent from my HTC6525LVW using XDA Premium 4 mobile app
Nilius17 said:
Yeah, didn't work here either.
Click to expand...
Click to collapse
Yeah I didn't get it either.
---------- Post added at 05:23 PM ---------- Previous post was at 05:22 PM ----------
Masa6GCS said:
Does anyone know what HTC setting number powersave is? I would like to enable it by using Sq editor and changing the values for quick_settings_items. So that powersave can be a toggle in quick settings. Any help in finding the number would also be appreciated.
Sent from my HTC6525LVW using Tapatalk
Click to expand...
Click to collapse
I dont think it matters. Does it?