Latest version of Zeus/ GB kernels - Samsung Infuse 4G

So I've been running the unofficial ICS and jellybean ROMs and have run into some problems. To avoid that, I'm going to return to stock .3.6 and just in GB ROMs. Zeus treats the battery kindly, so I'm going to run that. However, I can't find the latest version. I can only find v6.0.. the original.
Here's the link: http://forum.xda-developers.com/showthread.php?t=1412957
I would like to run the latest version of v6.
In addition, I'm looking to run a good GB kernel. The defuse kernel sounds like it will accommodate Zeus very nicely. I found the defuse kernel v1.4. Will this kernel be compatible with Zeus?
Thanks
Sent from my Nexus 7 using xda app-developers app

Dr_Nacho said:
In addition, I'm looking to run a good GB kernel. The defuse kernel sounds like it will accommodate Zeus very nicely. I found the defuse kernel v1.4. Will this kernel be compatible with Zeus?
Click to expand...
Click to collapse
defuse kernel is froyo. you'll be in a boot loop treat if you flash it over zeus.
zeus 6 may have been on the infusion kernel by bedwa,..i can't remember...
the choices you can run with zeus: uclb3 stock, zen's a1600 or b1400, entropy's dd.

qkster said:
defuse kernel is froyo. you'll be in a boot loop treat if you flash it over zeus.
zeus 6 may have been on the infusion kernel by bedwa,..i can't remember...
the choices you can run with zeus: uclb3 stock, zen's a1600 or b1400, entropy's dd.
Click to expand...
Click to collapse
Phew. I'm glad I didn't do that. I'll look up those kernels. Thanks
Do you know what the latest version f Zeus and where I can find it? I can only find the initial release version, v6.0.
Sent from my Nexus 7 using xda app-developers app

Dr_Nacho said:
Phew. I'm glad I didn't do that. I'll look up those kernels. Thanks
Do you know what the latest version f Zeus and where I can find it? I can only find the initial release version, v6.0.
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
V6.0 is not the initial release....that is like the 6th release...actually more then that if I remember correctly there were also some "x.x" releases as well...you probably won't find the latest as dman took it down and requested no one make mirrors...because I guess people were being dumb and complaining
Sent from my SGH-I997 using Tapatalk 2

mg2195 said:
V6.0 is not the initial release....that is like the 6th release...actually more then that if I remember correctly there were also some "x.x" releases as well...you probably won't find the latest as dman took it down and requested no one make mirrors...because I guess people were being dumb and complaining
Sent from my SGH-I997 using Tapatalk 2
Click to expand...
Click to collapse
Hmmmm. I was looking for v6.x.. just could not find them. That would make more sense after what u said. I know there were previous versions of Zeus, like v5 for instance. So over time the bugs should be pretty much worked out. V6 sounds great!
Thanks
Sent from my Nexus 7 using xda app-developers app

Related

Kernels what to use and what they do?

Well I'm still fairly new to this and looking to learn a bit more . I am pleased with my current Hellfire 2.1 now I'm looking to exntend my battery life to the best I can and I was told this can be done with kernels, Soo I was hoping I could get some suggestions and anything that could help me out understand this a bit more.
I am currently using some Faux Kernel that came with the current Hellfire phoenix release.
Lot of people say to use Trinity with this Rom but no one says why nor in the xda page of this kernel say much about what it does, I like to be well informed before doing any changes.
also how do you install a kernel just download and install from zip from clockworkmod recovery like everything else? or is there certain steps to it?
First off this should be in the Q&A...
http://forum.xda-developers.com/showthread.php?t=1073626
Sent from my LG-P999 using XDA
http://forum.xda-developers.com/showthread.php?t=1389069
^^^Fixed link^^^
Sent from my LG-P999 using XDA
Read these link's...
And they should tell you everything you need to know.
http://forum.xda-developers.com/showthread.php?t=1558080
Sent from my LG-P999 using XDA
And yes flash like you would any other zip. Just make sure to do a backup.
Sent from my LG-P999 using XDA
I'm currently testing the trinity kernel, The 1.1ghz one for the better battery. Using hellfire phoenix 2.1 so far its the rom I've enjoyed the most.
Any other kernel that anyone could recommend for the best battery performance I could get I'm pleased with the stock performance of the tegra 2 I have no need for overclocks.
Harsh kernel is the best. Flash it and see for yourself
Sent from my LG-P999 using xda premium
Morfic's Trinity ELP if your phone can handle it as it varies phone by phone. But I also use Faux123's kernels and they work well enough.
Stopfakn said:
Harsh kernel is the best. Flash it and see for yourself
Sent from my LG-P999 using xda premium
Click to expand...
Click to collapse
Don't flash it because you're using a GB based ROM...
Harshs kernel is for ICS ROMs...
Sent from my LG-P999 using Tapatalk
When choosing a kernel you should first know that they all are, in the most basic sense the same, but have little tweaks that make them all different. I know that the Trinity kernel has the Voodoo sound driver built in that is much better than any other driver. Also when choosing a kernel you need to just try a few and see how stable they are as not all phones are created equal. Some can handle the Trinity kernel and some can't (and same with all others). When you find one that works well with you just stick with it. And, as I like to say, to each his own.

Custom Kernel with V21Y

Is anyone using a different kernel with the new v21y baseband?
Faux's 14b 2.
buru898 said:
Faux's 14b 2.
Click to expand...
Click to collapse
14b2? I'm familiar with the g2x prior to baseband update but I've never seen that one...link?
Sent from my LG-P999 using XDA
Check on rootz, second to last post.
Sent from my LG-P999 using Tapatalk
Faux all the way.
http://forum.xda-developers.com/showthread.php?p=25924733
Sent from my LG-P999 using xda premium
I'm using the 14b2 faux123 kernel with v21y. It's a lot better than the stock kernel.
Sent from my LG-P999 using XDA
how's the battery life i don't want to loose my 3hrs screen on time using akop and faux
Sent from my LG-P999 using XDA
Sk8trfred said:
how's the battery life i don't want to loose my 3hrs screen on time using akop and faux
Sent from my LG-P999 using XDA
Click to expand...
Click to collapse
There you go.
Sent from my LG-P999
buru898 said:
Faux's 14b 2.
Click to expand...
Click to collapse
I'm using this kernel as well. I can confirm that it's much smoother and quicker than the stock kernel.
Sent from my Motorola StarTAC
andrewNY said:
I'm using this kernel as well. I can confirm that it's much smoother and quicker than the stock kernel.
Sent from my Motorola StarTAC
Click to expand...
Click to collapse
What about battery life?
Sent from my LG-P920 using XDA
cricketAC said:
There you go.
Sent from my LG-P999
Click to expand...
Click to collapse
Switch to a different browser if want to save more battery
Sent from my LG-P999 using xda premium
I the 014b2 kernel working with rc3? I can't get to load past the boot animation.
aaCotyaa said:
I the 014b2 kernel working with rc3? I can't get to load past the boot animation.
Click to expand...
Click to collapse
There are two threads/ variations of faux kernels. One is for GB like this one and the other is for cm7 based. Use the other kernel 050b1 i think.
cricketAC said:
There are two threads/ variations of faux kernels. One is for GB like this one and the other is for cm7 based. Use the other kernel 050b1 i think.
Click to expand...
Click to collapse
That one works with the new bb?
aaCotyaa said:
That one works with the new bb?
Click to expand...
Click to collapse
I dont think so cuz at that time cm7 wouldnt work with new BBz, dunnno if he patched it up(his kernel) later on.
cricketAC said:
I dont think so cuz at that time cm7 wouldnt work with new BBz, dunnno if he patched it up(his kernel) later on.
Click to expand...
Click to collapse
Just looked into it. Apparently 050 is for Rc2 only.
---------- Post added 2nd June 2012 at 12:06 AM ---------- Previous post was 1st June 2012 at 11:49 PM ----------
OK, I got it working. I flashed my old favorite Trinity kernel. I really didn't expect it to work, but apparently it does.
The Eaglesblood ICS release 3 came with Trinity Kernel and had UMS support They just updated to Supporting the V21Y baseband. going to try Harsh and see what happens
jimmydafink said:
The Eaglesblood ICS release 3 came with Trinity Kernel and had UMS support They just updated to Supporting the V21Y baseband. going to try Harsh and see what happens
Click to expand...
Click to collapse
That would explain it then lol
I running T15-G2x-06022012 with CM7 RC3 OCed to 1400 with out issues
For Faux's 014b2 kernel, which do you recommend when running Kwes' modified stock ROM (v21y)? I see pre-UV and stock voltage versions. I'm leaning towards stock voltage, but is there a major advantage for the pre-UV? (I'm not even really sure what is meant by pre-UV -- pre-under voltage?)
Thanks!
EDIT: pre-UV is pre-under volted. From a little more reading, I found that pre-UV means the kernel has a -50mv UV already. So if using UV/OC tools and apps, you need to take into account that -50mv already.
http://forum.xda-developers.com/showpost.php?p=14887835&postcount=262
Hopefully this explanation helps anyone else with a similar question.

[Q] ICS ROM / KERNEL ? Anything official / Information?

Hello, I have been doing some reading here as well I sit on IRC on the #skyrocket channel which is pretty quiet these days.
I am using TPC GB rom build with Da_G kernel, and so far (since november 2011) it has been solid.
I have tried alienROM for the ICS leak, but it is missing some kernel features I like, however is a decent ROM. I was wondering if there were any nice ROMs or Kernels for ICS yet, or are well all still waiting for samsung to release an official ICS build so proper kernels can be made. It has been quite awhile and are we even getting an official build for the I727R (Rogers)
I wanted to post here if that is OK because I have not been finding too many answers to what I am looking for. I am in no rush really, but wanted to start thinking about tweeking my phone. Would it be best to play with leaked builds or just wait till some official builds come out then wait and go from there. If anyone has suggestions that would be great.
Thank you for your time and comments.
Hi. All the roms you'll find here are decent and will each appeal to different people and their needs. I've found the latest SkyICS to be excellent in many ways. Try a few different ones to see what you like. Any will be better than stock GB.
As for kernels, there are a few out, but none will have all the features we like about a custom kernel until the official ICS is released because -as far as I know - the code for the kernel hasn't been released yet.
For example, we won't have overclocking until someone can tear into the official released kernel.
I am not a developer, so please, someone correct me if I'm wrong about this.
Sent from my SAMSUNG-SGH-I727 using XDA
Without kernel source nothing can be done. No oc, no uv, no bln.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Thanks for the reply, I am on GB (not stock) running rom / kernel (4.3.5) just can't decide on what ICS I want to go with. So I will continue to read away
LPMatt said:
Hi. All the roms you'll find here are decent and will each appeal to different people and their needs. I've found the latest SkyICS to be excellent in many ways. Try a few different ones to see what you like. Any will be better than stock GB.
As for kernels, there are a few out, but none will have all the features we like about a custom kernel until the official ICS is released because -as far as I know - the code for the kernel hasn't been released yet.
For example, we won't have overclocking until someone can tear into the official released kernel.
I am not a developer, so please, someone correct me if I'm wrong about this.
Sent from my SAMSUNG-SGH-I727 using XDA
Click to expand...
Click to collapse
xcrazydx said:
Without kernel source nothing can be done. No oc, no uv, no bln.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
Doesn't the Cymbaline kernel have BLN now?
Dimarini said:
Doesn't the Cymbaline kernel have BLN now?
Click to expand...
Click to collapse
Yes. He posted that before the t989 source dropped. Cymbaline used fixes from that source. We also have instigatorx kernel for aosp based roms.
--
SGH-I727 using XDA premium, running cm9.
Questions? look here: http://forum.xda-developers.com/search.php

[Q] Custom Kernel

Hi my skyrocket is currently running 4.0.3 ics leaked rom, and I was wondering if i could flash custom kernel on ics rom, or would I have to stock gingerbread to use custom kernel. I just do not want to get bricked etc. Thank you.
It depends on the ROM, if it's SKY ICS or some other modded Samsung rom, then you pretty much have to stick with stock, or do some research because I don't really know what Kernels are available for it. Maybe someone with more knowledge will chime in...
If it's AOSP based (CM9, AOKP, Chimaira, etc), then the only other option I know of is InstigatorX's kernel, which seems to work quite well. Pick a stable version, since the latest has issues with the camera. The stock kernel for CM9 is also quite good, but the CPU governors added in Instigators are great for saving battery.
http://forum.xda-developers.com/showthread.php?t=1721235
ian619420 said:
Hi my skyrocket is currently running 4.0.3 ics leaked rom, and I was wondering if i could flash custom kernel on ics rom, or would I have to stock gingerbread to use custom kernel. I just do not want to get bricked etc. Thank you.
Click to expand...
Click to collapse
You can flash cymbaline. Don't try to flash instigator's cm9 kernal you aren't using an aosp rom. Cymbaline fits your deal nicely. You'll dig it.
Sent from my part of the problem
boobah204 said:
You can flash cymbaline. Don't try to flash instigator's cm9 kernal you aren't using an aosp rom. Cymbaline fits your deal nicely. You'll dig it.
Sent from my part of the problem
Click to expand...
Click to collapse
second this
boobah204 said:
You can flash cymbaline. Don't try to flash instigator's cm9 kernal you aren't using an aosp rom. Cymbaline fits your deal nicely. You'll dig it.
Sent from my part of the problem
Click to expand...
Click to collapse
That what i use. +1
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
norbarb said:
That what i use. +1
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Click to expand...
Click to collapse
I also use this kernel and in conjunction with System Tuner for OC/UV.

[Q] Flashing a new kernel onto an existing rom

Can I flash the Infusion Kernel 1.8 onto Emancipation A: 1? For all intensive purposes I'm asking if the kernel can be flashed onto any rom.
I don't want to ask a stupid or noob question but, I haven't been able to find my answer anywhere. When I first started the rooting/flashing a rom process I was gonna go with Zeus Z-TR which I believe has voltage control built into it. After a bit of reading I settled on Emancipation but, I still wanna be able 2 OC/UV.
Also, I'm wondering about the beats audio that is built into the Z-TR rom. Is that because it comes with 1.8 kernel?
So, if someone can answer that question I would really appreciate it a lot.
I'd just flash the new synthesis kernel and as long as you're on gingerbread, you can flash another GB kernel you wish
Sent from my SGH-I997 using xda app-developers app
TikeKiller889 said:
Can I flash the Infusion Kernel 1.8 onto Emancipation A: 1? For all intensive purposes I'm asking if the kernel can be flashed onto any rom.
Click to expand...
Click to collapse
I'm thinking Infusion is Froyo and Emancipation is GB. If those facts are correct, then NO, you can not
Sent from my SAMSUNG-SGH-I997 using Tapatalk 2
Thanks for the answers. After looking into it some more its safe to say I'm stuck without OC/UV since its GB.
If youre on gb, flash the synthesis kernel. Its oc/uv with working mhl on gb.
Sent from my SAMSUNG-SGH-I997 using xda app-developers app
I'll not familiar with synthesis.....must be new within the last year.
There are several kennels named infusion. The one you (op) mentioned was Froyo.
But developer/member Zen has two GB kernels named Infusion that allow overclock...Zen's Infusion A and Zen's Infusion B. 1600 for A and 1400 for B
Sent from my SAMSUNG-SGH-I997 using Tapatalk 2
Here is synthesis. http://forum.xda-developers.com/showthread.php?t=1638138
Sent from my SAMSUNG-SGH-I997 using xda app-developers app

Categories

Resources