after flashing ics i am not able to take screen shot by pressing power+home key!wat to do?
wrong place buddy, it should be in QA..
try volume down and power...
Sent from my GT-I9100 using xda premium
after flashing ics i am not able to take screen shot by pressing power+home key!wat to do?
Click to expand...
Click to collapse
Search the forum Buddy... for screen shot in ics you need to hold down the combo for at least 2 seconds and then it will take the screenshot..
From my CM10 powered galaxy R
This thread shld b closed dwn buddy....
It has been discussed several tymes .
Sent from my i9103 using CM10 alpha
Related
I think no one has asked this. Does the ICS leak should have come with a screencapture.apk that will work like the gb roms where we just press power+home key?
-----------
sent from my calculator with android
Home+Power still works.
ICS default is Volume Down+Power.
Sent from my SAMSUNG-SGH-I727 using XDA
iandr0idos said:
Home+Power still works.
ICS default is Volume Down+Power.
Sent from my SAMSUNG-SGH-I727 using XDA
Click to expand...
Click to collapse
Volume down+power doesnt work for me. Do you have the apk for that?
-----------
sent from my calculator with android
jose makalolot said:
Volume down+power doesnt work for me. Do you have the apk for that?
-----------
sent from my calculator with android
Click to expand...
Click to collapse
Its not an apk. If you flashed ICS its default volume down + power. If it doesn't work I'd suggest factory reset of reflash.
Sent from my fully functional SAMSUNG-SGH-I727 using xda premium
Press power and hold it, then press volume down. Hold both for about a second
Sent from my SAMSUNG-SGH-I727 using XDA
NightHawkUndead said:
Its not an apk. If you flashed ICS its default volume down + power. If it doesn't work I'd suggest factory reset of reflash.
Sent from my fully functional SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
It is an apk in gb. In ota it is screencapture.apk. if it is from team kang it is screenshot.apk
iandr0idos said:
Press power and hold it, then press volume down. Hold both for about a second
Sent from my SAMSUNG-SGH-I727 using XDA
Click to expand...
Click to collapse
Still nothing. Thanks.
-----------
sent from my calculator with android
jose makalolot said:
I think no one has asked this. Does the ICS leak should have come with a screencapture.apk that will work like the gb roms where we just press power+home key?
-----------
sent from my calculator with android
Click to expand...
Click to collapse
If you had searched, there's been a thread about this. Blah......
Sent from my SAMSUNG-SGH-I727 using xda premium
Still cant get any combo of keys to work here, running the UCLD2 one-click rom
Hold vol down and power again hold
Sent from my SGH-T989 using Tapatalk 2
nrm5110 said:
Hold vol down and power again hold
Click to expand...
Click to collapse
Tried that a few times... vol - and home... phone just goes to task manager or shuts off
Home and power work for me but you have to have it timed just right. Press one before the other and it won't be a screen capture. And make sure you hold it for a second or two (after you get the timing just right). It should copy the screen to the clipboard.
I've never had issues with screenshot you have to press them at exactly the same time
Sent from my SAMSUNG-SGH-I727 using xda premium
Vol down and pwr worked great on UCLD2 as well as home and pwr. In UCLE2, only home and pwr works. No biggie but timing is crutial. Vol down and pwr was more forgiving... to me at least.
Both methods are not working for me
4.0.4 UCLE2
Ever since I got ICS its been PWR + Vol Down for a couple seconds
Sent from my SAMSUNG-SGH-I727 using xda premium
Power + volume down works for me on any ICS ROM. The trick is to press the buttons at exactly the same time not one then the other, and hold them for a few seconds.
Sent from my SAMSUNG-SGH-I727
I was about to comment
Anon_ said:
Both methods are not working for me
4.0.4 UCLE2
Click to expand...
Click to collapse
that I was having the same issue but it finally just worked for me as I was reading this thread.
Oddly, it seems once I got it the first time, it now works every time no problem.
Good luck!
Wow! Thanks!
rpr69 said:
Power + volume down works for me on any ICS ROM. The trick is to press the buttons at exactly the same time not one then the other, and hold them for a few seconds.
Sent from my SAMSUNG-SGH-I727
Click to expand...
Click to collapse
This post just solved my problem!! Thanks!
No Screen Capture for me...
DarkShadow1130 said:
This post just solved my problem!! Thanks!
Click to expand...
Click to collapse
I have an AT&T stock SGH-i727 Skyrocket, I just updated it to the official ICS 4.0.4 via KIES. I have tried every combination in this discussion to no avail... I have used Power+Home dozens of times previously on 2.3.6.
Any suggestions are GREATLY appreciated!
Perseids said:
I have an AT&T stock SGH-i727 Skyrocket, I just updated it to the official ICS 4.0.4 via KIES. I have tried every combination in this discussion to no avail... I have used Power+Home dozens of times previously on 2.3.6.
Any suggestions are GREATLY appreciated!
Click to expand...
Click to collapse
Problem solved
Hello i wanted to ask if i can force the power button to take pictures when i push it once instead of clicking on the screen.
i don't want to the power button to lose it's original behavior, i mean when i hold it for long enough it will still show the Shut down and REBOOT etc.. options.
i tried the one here http://forum.xda-developers.com/showthread.php?t=916154, but i all i can find is MENU & BACK.
is there a way?
thank you.
Try using Razodroid rom.. It has got the feature u opt to have..
Sent from my GT-S5670 using xda premium
There is already a hack available for stock roms by wilfredcool007 in the dev section...
And most of the stock based custom roms already use his mod...
And all cm7 also have this option...
And it behaves as shutter key only in the camera app...nowhere else...
Sent from my Galaxy S III using xda premium (really, I'm not kidding)
http://forum.xda-developers.com/showthread.php?t=1382114 hope this helps out. flash through cwm
if that doesn't work try this http://forum.xda-developers.com/showpost.php?p=21849917&postcount=5
hello O1 people XD. i need help with something that i need to do with my phone 'cause power button is almost broken.
in every rom that i installed in my O1, i remapp the search key as power button. even in ICS i made this change without any problem but i don't know if JB is diferent.
when i try to remap the search key by editing qwerty.kl and/or thunder_keypad.kl, then it looks like it comes unaccesible. so when a restart the phone, all buttons losses their keymaps. i can not do almost anything. I try button remapper apk but it just recognizes power key and headsethook key only.
i made a logcat and there's a message that always repeat: "W/SocketClient( 98): write error (Broken pipe)"
so my question is: do anyone try successfully to remap keys on jellybean? what should i do?
thanks guys...
Check my sig, it works in every roms
Sent from my LG-P500 using xda premium
FPChaim said:
Check my sig, it works in every roms
Sent from my LG-P500 using xda premium
Click to expand...
Click to collapse
Thanks!!!!! it really works... :laugh: :laugh: :laugh: :laugh: :laugh:
I am currently on cm10b#3 and when I lock my phone it starts and when I long press power button to reboot it does not work like it used to before...hope u people understand my problem. I would be really thankful to the person who will help me!!
Do you mean that your power button is actually working for powering on but doesn't work when phone is ON/Doesn't bring power Manu on holding?
Is this the problem with this specific ROM?
Did you clean install?
Wipe every thing and flash again.
Sent from my HTC Explorer A310e using xda premium
its not a rom problem its a hardware problem..!! take or device to Service center...theyl repair it ..!!then everything will be oky!!:angel:
other than a maunal fix is comming Soon:fingers-crossed:
Explaination needed..
pknagi said:
I am currently on cm10b#3 and when I lock my phone it starts and when I long press power button to reboot it does not work like it used to before...hope u people understand my problem. I would be really thankful to the person who will help me!!
Click to expand...
Click to collapse
Please explain in more detail what is happening...step by step..
Listen...when i press the power button the screen goes on again and goes off again...this does not always happen but most of the time..secondly when i long press the power button to open power menu.the power menu shows up but when I release the button the screeen goes off!!!
Sounds like it's a hardware problem...
You have to go to the service center for this...
By the way.. Did you try to flash different roms..
Sent from my HTC Explorer A310e using xda app-developers app
its a hardware problem...you can see this thread http://forum.xda-developers.com/showthread.php?t=1927192
I too facing the same problem..but after installing MiniCM9-3.0.5 Build1..the problem almost gone for me..i think so...
Just check it..
akshay4 said:
its not a rom problem its a hardware problem..!! take or device to Service center...theyl repair it ..!!then everything will be oky!!:angel:
other than a maunal fix is comming Soon:fingers-crossed:
Click to expand...
Click to collapse
Any idea abt that guide by bhargav ?
How many more couple of days are left?
Sent from my HTC Explorer A310e using xda premium
My power button just stopped working for no reason. one day it started to act weird and work very weak and another day it stopped working totally. I seen a video of screen replacement where the person opened the phone and you could see motherboard. I was thinking maybe somehow the wiring got loose but when I looked at the video there was no wire going to power button, What could make it not work? how can I fix it? Thank you
Is there way to bootup phone without power button?
Yes, with latest wkpark bootloaders and with custom kernel. Remove battery and put it back. The phone will start automatically.
Then you can flash kernel from v28b leaked rom. You turn on the screen by pressing volume down button.
Sent from my LG-P920 using XDA Premium 4 mobile app
I have latest wkparks bootloader but phone does not bootup after inserting battery I tried many times before. if connect phone to pc while it's turned off it goes to fastboot . I tried all different combinations of inserting battery and plugging the chaeger but neither works
Sent from my LG-P920 using xda app-developers app
krija said:
Yes, with latest wkpark bootloaders and with custom kernel. Remove battery and put it back. The phone will start automatically.
Then you can flash kernel from v28b leaked rom. You turn on the screen by pressing volume down button.
Sent from my LG-P920 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I am using GPCR 2.1 with shazo kernel + wkparks bootloader. phone doesnt boot up after inserting battery
niko22225 said:
I am using GPCR 2.1 with shazo kernel + wkparks bootloader. phone doesnt boot up after inserting battery
Click to expand...
Click to collapse
hmm try diffrent kernel my phone always boot up after inserting battery
Is there a custom kernel for cm 10? :S
Sent from my LG-P920 using XDA Premium 4 mobile app
niko22225 said:
Is there a custom kernel for cm 10? :S
Sent from my LG-P920 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
iodiak kernel for cm10 if not help then you need flash ics with flashtool
michalsk11 said:
iodiak kernel for cm10 if not help then you need flash ics with flashtool
Click to expand...
Click to collapse
I could flash it also through recovery lol. But I really would like to keep it. For now Im booting up phone with os hacking tool through USB what means I can only do so only at home. For now I try battery to not die . Also cm10 has a volume rocker wake option which unfornately stops working when cpu goes to deepsleep so I always must plug headphones in and out so headphone jack is probably next thing Im going to break. Thanks for the tip I will try iodaks kernel .
Sent from my LG-P920 using XDA Premium 4 mobile app
niko22225 said:
I could flash it also through recovery lol. But I really would like to keep it. For now Im booting up phone with os hacking tool through USB what means I can only do so only at home. For now I try battery to not die . Also cm10 has a volume rocker wake option which unfornately stops working when cpu goes to deepsleep so I always must plug headphones in and out so headphone jack is probably next thing Im going to break. Thanks for the tip I will try iodaks kernel .
Sent from my LG-P920 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
remap your power button to 3d button , for example i change volume down to 3d button for playing emulators like ppsspp
michalsk11 said:
remap your power button to 3d button , for example i change volume down to 3d button for playing emulators like ppsspp
Click to expand...
Click to collapse
Sounds good but how can I do that? also if I ever choose to go back to ICS can I safely remap it back as it was before? and could you please send me link for iodaks kernel? i was searching all his threads but I couldnt find it
niko22225 said:
Sounds good but how can I do that? also if I ever choose to go back to ICS can I safely remap it back as it was before? and could you please send me link for iodaks kernel? i was searching all his threads but I couldnt find it
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2069166 Here is the link . You can also use in the worst case, the proximity screen off app on Play Store. Its one of the temporary solutions. https://play.google.com/store/apps/details?id=com.itsme4ucz.screenoff&hl=en
Thanks for the link ) May I ask how long it should averagely take to bootup after inserting battery? After flashing kernel , my phone booted up when I inserted battery but sometimes it doesnt. I will be sure after some days of use. For now thank all of you for tips and help
Sent from my LG-P920 using XDA Premium 4 mobile app
niko22225 said:
Sounds good but how can I do that? also if I ever choose to go back to ICS can I safely remap it back as it was before? and could you please send me link for iodaks kernel? i was searching all his threads but I couldnt find it
Click to expand...
Click to collapse
system/usr/keylayout try too change in generic.kl in this folder i will try to remap power button with my phone and post it.
michalsk11 said:
system/usr/keylayout try too change in generic.kl in this folder i will try to remap power button with my phone and post it.
Click to expand...
Click to collapse
You don't need to if you don't want to. I found an solution . Thank you for tips
Sent from my LG-P925 using XDA Premium 4 mobile app