Hi all.
Got a Asus Infinity tf700t tablet yesterday. Today I rooted it using this tut on youtube called How to Root the Asus Transformer Pad Infinity TF700T using Everything went fine and superuser installed. So I downloaded root checker and yes its rooted. Later today I got the popup for firmware update to JB so did it not even thinking about the root. update went fine it restarted and I have Jelly Bean. So I look in root checker and say not rooted. doh. So I Google rooting JB and no luck in a way. I don't want to unlock the tablet so that way is out. Then find out I should have installed and used Root OTA Keeper before installing update.
So then looked up how to downgrade to ICS from JB. I downloaded the firmware from Asus for ICS. Unzipped the 1st zip and copied the zip file to my SD card. Put SD card into tablet. Power + volume down and menu pops up then press volume up and it goes to a android loading screen for 2 seconds then a dead android screen with red triangle !.
From the Asus site I got firmmware Version V9.4.5.30 Eee Pad Transformer Pad Infinity TF700T Firmware: V9.4.5.30 Only for WW SKU
Now what? Any idea's?
About tablet:
Android version
4.1.1
Kernel Version:
3.1.10
[email protected]))
#1 SMP PREEMPT Fri Oct 12 11:51:10 CST 2012
Build version:
JRO03C.WW_epad-10.4.4.18-20121012
Any help would be mint as Im stuck with is.
Asus700t said:
Hi all.
Got a Asus Infinity tf700t tablet yesterday. Today I rooted it using this tut on youtube called How to Root the Asus Transformer Pad Infinity TF700T using Everything went fine and superuser installed. So I downloaded root checker and yes its rooted. Later today I got the popup for firmware update to JB so did it not even thinking about the root. update went fine it restarted and I have Jelly Bean. So I look in root checker and say not rooted. doh. So I Google rooting JB and no luck in a way. I don't want to unlock the tablet so that way is out. Then find out I should have installed and used Root OTA Keeper before installing update.
So then looked up how to downgrade to ICS from JB. I downloaded the firmware from Asus for ICS. Unzipped the 1st zip and copied the zip file to my SD card. Put SD card into tablet. Power + volume down and menu pops up then press volume up and it goes to a android loading screen for 2 seconds then a dead android screen with red triangle !.
From the Asus site I got firmmware Version V9.4.5.30 Eee Pad Transformer Pad Infinity TF700T Firmware: V9.4.5.30 Only for WW SKU
Now what? Any idea's?
About tablet:
Android version
4.1.1
Kernel Version:
3.1.10
[email protected]))
#1 SMP PREEMPT Fri Oct 12 11:51:10 CST 2012
Build version:
JRO03C.WW_epad-10.4.4.18-20121012
Any help would be mint as Im stuck with is.
Click to expand...
Click to collapse
Only way i know of is click this way
But then you would have to unlock
I didn't rename the zip file. its called: WW_epad-user-9.4.5.30 and is the only thing on the SD card. I used a usb to SD card adapter to copy the file over.
Yeh I seen that page.
So I have tried another thing removed SD card and put just the ICS firmware of asus page on it. tablet is on and jelly bean running i put SD card in and couple of seconds later a popup comes up to do a update / downgrade. So I run it and restarts and now running ICS again. Seen that the firmware update popup so not clicking it.
Time to try reroot ICS and use Root OTA Keeper then update to JB.
There is a way to downgrade without unlocking the bootloader..
http://forum.xda-developers.com/showthread.php?t=1926147
Just follow the guide above, worked fine for me and I was having the same problem (dead android)
Yeh all good now. running rooted Jelly bean.
Related
I have just received my second transformer a B70 with a dock straight out of best buy and it has 3.1 installed
My older B60 also came pre installed with 3.1 but as soon as I turned that on it told me there was a fw upgrade available and i've received 2 more since and am now running 3.2
is there some trick to this ? both are US versions btw
Can nobody answer this guys ?
I ran into a similar situation. Go to Asus` website and download the firmware update manually. Extract it, place it on the top level of your micro sd card. Reboot. The update should trigger when booting up.
Sent from my Transformer TF101 using xda premium
Great, thanks for the advice, the update didn't trigger at boot but when I got into the OS it notified me that I had an update file ready to install and from there I could enter the FW update
That's how it happened to me, it was RIGHT after it booted up. Symantecs, while booting, right after booting... either way.
Hi, I have an Asus transformer TF101, I used to have it rooted with CWM on android 3.2. So now that ICS was released for this tablet i wanted it. I knew i couldn't update with CWM.. So i read a tutorial on how to install a OS update from CWM then after, install something which would get rid of CWM. This would fine and i had the first 4.0.3 installed on my transformer successfully with no CWM (I tried getting into it to test but it wouldn't). Now it's been a bit of time, I've seen that asus have released a few new updates for my tablet. Now when i seach for updates on my tablet it says none are available.. So i thought I'd try and download from the website and put onto my SD card and hope that my tablet comes up with the little explanation mark to update.. But nothing. I tryed the recovery boot with the new OS on the SD card but just had the little green robot lay down looking broken. I'm not sure what to do now.. Should i re root it and then get CWM to update or is there something up with my tablet?
Thanks for reading.
Bump?
hello tf300t users. how did you guys properly update your rooted tf300t? did you guys even update?
the reason i ask is because i rooted my friend's tf300t but was forced to install the latest firmware and during instalation this showed up and the tf300t restarted to a message that said that the update failed but when i checked the build version it went from to .17 to .26.
i don't want the same thing happen to me. i just ordered a tf300t for myslef which should arrive in a couple of days. i'm planning on using sparky root to root and i'm gonna replace the build.prop file with seanzscreams' tweaked version.
will running voodoo ota root keeper to save root status then un rooting the tf300t to install the latest firmware to using voodoo to get back root status work?
or is it best not to update and just stay on build .17. in which case how would i make the transformer quit asking me to update?
thanks in advance!
edit: found answer
It's been a while since i've played with android, but I just want to load a fully functioning custom ROM.
Info (from about tablet)
Model Number
TF300TAndroid Version
4.2.2Kernel Version
3.1.10-10.4.2.20AOKP Version
fully_aokp_tf300t_unofficial_Mar-03-13
Info from bootloader screen
cardhu-user bootloader 1.00 e
ww_epad-10.4.2.20-20121228 A03This bootloader has the 4 icons (includes the USB fastboot icon)
Recovery:
TWRP 2.5
The tablet is actually a TF300TG, but all the roms seems to be for the TF300T and I read some posts saying the only thing you lose by cross flashing is the 3g functionality - although, I also read some stating not to.
Q1. It says it's running Android 4.2.2, but the bootloader is still the old JB type - is this because it's a custom rom?
Q2. Is there anything I can do to get WiFi working on this ROM? The wifi never moves to the 'on' position.
I followed the instructions from the link in the bellow quote (the first time around I was on the new bootloader) - I tried flashing both
ASUS Transformer Pad TF300T Firmware: V10.4.2.20 Only for WW SKU (Android 4.1) - 2013.01.18 update
ASUS Transformer Pad TF300TG Firmware: V10.4.3.9 Only for WW SKU (Android 4.1) - 2012.11.14 update
and then installing AOKP, but this just leaves me back where I started.
This ROM is really nice and I would like to continue using it.
The wifi works when using the asus stock software, and I believe it also worked when trying the Hydra ROM.
Many Thanks in advance.
wetbiker7 said:
luishawk said:
But will it work on roms with 4.2.1 bootloaders?
Click to expand...
Click to collapse
Surdu got this ROM to boot on the new bootloader but wifi doesn't work yet. I would wait on him to post the steps needed to get everything working correctly. I have a feeling that it won't be long before he has the newer version ready.
If you can't wait and want to run this ROM with everything working then you can downgrade back to the 4.1 bootloader.
Here is the thread that will tell you how to downgrade the bootloader if you decide to do so.
http://forum.xda-developers.com/showthread.php?t=2195883
Click to expand...
Click to collapse
Q1: You can still run Android 4.2.2 on the stock 4.1.1 bootloader, and you still are using the stock 4.1.1 bootloader. CM10.1 and AOKP do this.
Q2: When you flashed AOKP (which i used for a few months), did you format cache/dalvik/factory reset?
Hello
I have a problem with this ASUS Transformer Pad tablet (TF103CG)
basically I have the root and then I updated the firmware with this WW-TF103C-2.2.33.122-release-user-20141104-signed, all this to try to install a more recent version of android since I had to use an application that I could not install with android 4.4, but only after I realized that this firmware was not good for this tablet, now when I turn it on I get stuck on the INTEL Inside screen and there is no way to start it, you could help me thanks