Hey guys. Im having a problem with the proximity sensor on my sensation 4g. It was working fine when i bought it. It shut the screen off while calling, but now it does not. I thought that maybe rooting it would fix the problem by getting a custom rom, but i would like some input before i go rom exploring on this phone. I assume its a software issue because i havnt dropped the phone or anything along that line. Any Help would be highly appreciated. I also am looking for the dialer codes that would lead you into a test mode to test the functions on the device. If anyone knows of a code, I would appreciate to learn what it is. thank you for your help.
Make sure Proximity sensor is enabled in Settings > Call Settings > Additional Settings.
thank for your reply. I checked the settings and the only thing that shows up is Caller Id settings and Call waiting. Oh and i downloaded a market app that would show me all the sensors that work on my phone, and the light and proximity sensors both come up with an unknown error. Could it be something from the gingerbread update?
Did anyone figure this out? I have the same problem and its getting pretty annoying.
Me too...:-(
Hello,
I am having the same problem. Earlier, I thought that it was a ROM issue, however, after changing multiple ROMs, it seems to be firmware issue.
On my sensation, I found out that it is related to the back light for the soft keys (home, menu, back and search).
I can get it to work if I turn on pocket mode in Settings > Sound and then restart (once or twice). It will work until next restart.
I have installed AndroSensor from market and it shows one of the 3 messages
Proximity Sensor: Waiting for Event
Proximity Sensor: Unknown Error.
Proximity Sensor: 3.5in
Also, I am getting exceptional battery life which makes me wonder whether phone uses both the cores or if anything else is wrong with the phone.
I am using Energy ROM (3rd Oct).
Any feedback?
Thanks,
Baiju
baijunagori said:
Hello,
I am having the same problem. Earlier, I thought that it was a ROM issue, however, after changing multiple ROMs, it seems to be firmware issue.
On my sensation, I found out that it is related to the back light for the soft keys (home, menu, back and search).
I can get it to work if I turn on pocket mode in Settings > Sound and then restart (once or twice). It will work until next restart.
I have installed AndroSensor from market and it shows one of the 3 messages
Proximity Sensor: Waiting for Event
Proximity Sensor: Unknown Error.
Proximity Sensor: 3.5in
Also, I am getting exceptional battery life which makes me wonder whether phone uses both the cores or if anything else is wrong with the phone.
I am using Energy ROM (3rd Oct).
Any feedback?
Thanks,
Baiju
Click to expand...
Click to collapse
This is interesting b/c I just noticed I have the same problem, too. I do not check the pocket mode because I want to save some battery life. I did get the proximity sensor working during calls "sometimes". And it's really hard to define this "sometimes" b/c I cannot identify the pattern or reproduce the scenario.
My solution to this issue is that If it's not working, I recharge the battery until full, do a reboot, maybe reboot twice, and it is "sometimes" "fixed" by itself. In my case, after doing that, the proximity will work for a while (again, it's hard to determine how long), and just stopping working all the sudden.
I hope there is a easier fix, maybe a app, that would reset the proximity so we can apply it when the sensor does not work.
Hi I just realized the cause, it's because the battery % mod from UOT kitchen. I removed it and everything is fine now. Apparently the UOT kitchen's setting has problem.
I have 2 sensation 4g. One doesn't have any problem with Energy ROM. For the other phone, I went back to Factory settings and reinstalled original TMobile ROM. I still have problem with that one. I have contacted t-mobile and asked for a replacement. It is something with the hardware I suppose.
Baiju
hello
I got the exact same problem and i do many rom/kernel change to figure out this problem but i just can't .
Yungyeh could you explain more how do you solve it ? thks
toowave said:
hello
I got the exact same problem and i do many rom/kernel change to figure out this problem but i just can't .
Yungyeh could you explain more how do you solve it ? thks
Click to expand...
Click to collapse
I guess nothing fancy.
As I've known so far, there are several causes, which can be divided into two categories: Hardware and software .
If your device came with this issue, with a stock rom installed, maybe applied some updates, then you shouldn't wait to call the (HTC/T-mobile?) customer service. Have a exchange or replacement is the only way to correct the hardware issue.
If it's a software issue, i.e. it worked before with a stock rom, but now it fails sometimes after flashing a custom rom, you may go with the following solutions.
Situation One: If the custom rom is fresh installed, charge your device until battery full, stay in charge mode for another 1 - 2 hours, complete power off and on at least twice (three times maybe, make sure the "fastboot" in the power settings is off). Do not install any mod until your rom settles for a few hours. Sometimes the sensor does not work will simply because the cache goes wrong. If after waiting for a few hours and the problem still persists, you may want to check your custom rom's instruction and make sure you've followed every steps.
Situation Two: If the proximity sensor does not work all the sudden, especially after doing a reboot, you should first clear your data for phone app (or any other apps that use the proximity sensor), and then boot into recovery to clear all your cache. After wiping your cache, you have to do what situation 1 instructed because your device is just like a fresh installed one.
Situation Three: If your proximity sensor fails to work after applying a mod, especially some mods cooked from the UOT kitchen, revert back to your previous backup. DO NOT APPLY THAT MOD ANYMORE!!! Try some other mods that work for you and that is friendly to your proximity sensor. This situation also applies to if your flash an inappropriate kernel. Revert back to your previous backup is the only solution.
If none of the situations described above works for you, then I am out of clue. Changing to other custom rom or kernel usually does not work. You may try that but I doubt it will resolve this issue. It may be just your bad luck that the proximity sensor of your device goes to its end. I sincerely hope it not the case.
my sensors are not working!!
accelerometer
gyroscope
light
magnetic field
orientation
proximity
All not working...
Was using HyperSensation-CM7.1-v0.8, then decided to update the kernel, faux newer one, then lost the ability to rotate the phone..
So, did a manual wipe, then super wipe, restored my backup, and still no sensors,
wiped again and tried a diffrent rom nothing changed,
wiped again tried arhd 3.6.7 with stock kernel and faux kernel,
tried cm7 with the kernel it comes with or the newer one and still nothing...
at what level does the software talk to these sensors, is there a 100%way to wipe the phone and start over? i have never had any issue like this before!
Would reverting back to the original rom via fastboot help at all versus what i have done?
if someone has any ideas pm me, its a little bit easier then catching a response here since this is the most popular rom in the world lol, but ill still be reading
I'm having the same probpem. I don't really mess around with Roms or anything and I have 2 sensation 4g that do the same thing. And I believe is an htc problem.
having the same iseu with proximity and light sensor.
Do you have an solution yet ?
yungyeh said:
Hi I just realized the cause, it's because the battery % mod from UOT kitchen. I removed it and everything is fine now. Apparently the UOT kitchen's setting has problem.
Click to expand...
Click to collapse
I`m having the same problem with both proximity and light sensors.They work occasionally but not for to long.Have you found a solution for this?
It's April of 2012 and I have found NO answers or fixes!!!!!!!!!!
Same sensor problem on my sensation.
If I reboot the phone in a dark room, booth sensors are working (I don't know if it's correct when the proximity sensor shows only 3,5 or 0 inches, but it works)
When I go to a lighted room, the proximity sensor stops to work and the light sensor needs more time to measure the illumination.
If I reboot the phone into lighted room, the sensors didn't work.
It is possible to simulate a "dark room" by covering the sensors with a finger ;-)
It is not easy to decide if the error is located into software or the sensors are "overloaded". For finding out a solution I have ordered new flex main board which should contain booth sensors. Hope it helps ^^
schand99 said:
Same sensor problem on my sensation.
If I reboot the phone in a dark room, booth sensors are working (I don't know if it's correct when the proximity sensor shows only 3,5 or 0 inches, but it works)
When I go to a lighted room, the proximity sensor stops to work and the light sensor needs more time to measure the illumination.
If I reboot the phone into lighted room, the sensors didn't work.
It is possible to simulate a "dark room" by covering the sensors with a finger ;-)
It is not easy to decide if the error is located into software or the sensors are "overloaded". For finding out a solution I have ordered new flex main board which should contain booth sensors. Hope it helps ^^
Click to expand...
Click to collapse
@schand99: The Flex/Main Board actually isn't the problem. It is an HTC software/hardware related problem. I have 2 Sensation's here now, one is rooted and unlocked entirely and the Proximity and Ambient Light Sensors and the Capacative Backlights on the touchpad DO NOT WORK. FYI, the touchpad lights work in cooperation of the Ambient Light Sensors: If there is any light under 90.0 Luxes (this is how the sensor measures light) the backlights will come on. If there is anything over 90.0 Luxes, the backlights will stay off. This is based on the fact that you need light in a totally dark environment, or you do not need light as you can see the touchpad and it is not that dark.
It is DEFINITELY not a hardware issue as there are some temporary fixes that will bring them back to life, but usually after a reboot, they are both dead again.
I am curious if your new flex/main cable would do the trick or not. I have tested the sensors chipsets independently and they work fine, there is just something that block their functionality on a software end.
mariosaraylian said:
It is DEFINITELY not a hardware issue as there are some temporary fixes that will bring them back to life, but usually after a reboot, they are both dead again.
I am curious if your new flex/main cable would do the trick or not. I have tested the sensors chipsets independently and they work fine, there is just something that block their functionality on a software end.
Click to expand...
Click to collapse
My report about main flex board changing:
After changing the board booth sensors are working fine. I have tested the functionality of the sensors also on different ROM's like stock rom, OrDroid and CoinDroid. No problem until now. It makes not a difference anymore if I power on the phone into dark room or on a sunny place.
BUT!
I don't recommend to do this by yourself. It is verry difficult to do this work !!
It is my profession to do this kind of work.
AND
to change the board was the right method for fixing the sensor-problem on my HTC Sensation. I had to unlock the hboot 1.27.xx by using the "beer drinking" method. So perhaps I have damaged the sensors by doing this...
schand99 said:
My report about main flex board changing:
After changing the board booth sensors are working fine. I have tested the functionality of the sensors also on different ROM's like stock rom, OrDroid and CoinDroid. No problem until now. It makes not a difference anymore if I power on the phone into dark room or on a sunny place.
BUT!
I don't recommend to do this by yourself. It is verry difficult to do this work !!
It is my profession to do this kind of work.
AND
to change the board was the right method for fixing the sensor-problem on my HTC Sensation. I had to unlock the hboot 1.27.xx by using the "beer drinking" method. So perhaps I have damaged the sensors by doing this...
Click to expand...
Click to collapse
@schand99: That's very strange that it could be the SAME hardware problem for all of these people that are complaining about this issue. I wonder if is some sort of production issue they have. The strange part is that it is not just for the lot of hardware issued for the USA only, it is also in other parts of the world also.
I did a hardware exchange with mine at the TMOUS store and the "new" one I have now is working fine thank God.
I told them that the TMOUS ICS RUU OTA upgrade broke the sensors LOL!
Thanks for your feedback!
Hey All,
Replaced my cracked screen this weekend. Everything seems to be back to functional now, EXCEPT
- the ambient light sensor isn't working
- the rear camera isn't working
If I open the camera app (any camera app) it will show the front camera so I see my stupid face, but if I push the "use the other camera" button nothing happens.
Entirely possible I messed something up in the reassembly, BUT before I go and take the thing apart again I was wondering if there was anything I could try from a software / firmware perspective first.
thebobmannh said:
Hey All,
Replaced my cracked screen this weekend. Everything seems to be back to functional now, EXCEPT
- the ambient light sensor isn't working
- the rear camera isn't working
If I open the camera app (any camera app) it will show the front camera so I see my stupid face, but if I push the "use the other camera" button nothing happens.
Entirely possible I messed something up in the reassembly, BUT before I go and take the thing apart again I was wondering if there was anything I could try from a software / firmware perspective first.
Click to expand...
Click to collapse
Well, I am not the biggest hardware person, but I believe you can run the RUU and detect if it is a hardware issue. Again, I am not sure, you may want to double check.
Bump, anyone else have any suggestions for ways to "wake up" my camera?
FYI for anyone else who stumbled upon this thread - the problem was a disconnected ribbon cable that I missed. Between the motherboard and the plate that the camera sits on it a TINY ribbon cable (lengthwise) that has to plug into the back of the motherboard. It's nearly impossible to get even the tiniest tool in between the motherboard and the front assembly while this cable can reach its connector. So if you end up in this situation, have a lot of patience. I don't know if there's a way to get the screen off WITHOUT disconnecting this cable, but I certainly couldn't find one.
Oke lets go the point, i replace my volume flex yesterday, i dunno what did i do, but now i cant use my rear camera(main camera), im not sure if i touch the camera module or not. But when i open the camera, it automatically open the front facing camera, no option to change it to rear camera.
All 3rd camera apps didnt work too.
I installed hardware detector apps from store, it showing my main camera is the front facing camera, the the secondary camera is 'disabled'
Can someone here make sure that my problem is about the camera hardware?
I tried clear wipe cache dll, reflash rom, remove sd card, but no luck.
Any answer will be great
sorry before..i don't know anything detailed about phone hardware...
but just my guess.. i think maybe there's something about the cable or everything the name is (i don't know what's that)..that are not correctly attached or something that are already unattached from the camera module while you try to open it or changed it that volume flex by accidentally..and you've already forget or missed that things while you assemble it that phone again..
did you already try to dissemble it again to check everything in detailed...that all is already correctly in the right position..?
JJeamy said:
sorry before..i don't know anything detailed about phone hardware...
but just my guess.. i think maybe there's something about the cable or everything the name is (i don't know what's that)..that are not correctly attached or something that are already unattached from the camera module while you try to open it or changed it that volume flex by accidentally..and you've already forget or missed that things while you assemble it that phone again..
did you already try to dissemble it again to check everything in detailed...that all is already correctly in the right position..?
Click to expand...
Click to collapse
I have dissemble it and i can make sure nothing is missinf.
I just want to know, is this problem with cam hardware or the mainboard.
Hey! I'd like to ask a favor from someone with a Zenfone 7 in their hands. Could you tell me the driver name of your proximity sensor? You can check it by using Sensor Box (free on the playstore).
I'm asking for this because it seems my phone doesn't even recognise the driver and it just displays as ASUS Proximity Sensor, opposedly to other sensors that display their true name. Maybe I'm tripping and that's just it's real name, but I'm almost sure it had a different name before the sensor started malfunctioning.
I'll attach a couple screens. Thank you in advance.
Here's some screenshots from a borrowed Zenfone 7 Pro, as you can see it's named the same.
To be sure we don't suffer the same fate I did some tests to confirm that sensor is working.
@zcrubby Thank you! Indeed your sensor works well. I'll keep trying to figure out where to find the root folder of the proximity sensor driver to disable it, since I was able to get sensor disabler functioning but didn't do the trick with the proximity sensor. Would you let me know if you know something? Much appreciated!
tommydotwav said:
@zcrubby Thank you! Indeed your sensor works well. I'll keep trying to figure out where to find the root folder of the proximity sensor driver to disable it, since I was able to get sensor disabler functioning but didn't do the trick with the proximity sensor. Would you let me know if you know something? Much appreciated!
Click to expand...
Click to collapse
Any luck in disabling the proximity sensor? I have a strange bug wherein every restart of the device causes the first instance of the camera to flip upside down and come up with the camera obstruction error. But once you click ok several times it's fine.