Database Info

[Q] List of Heimdall-compatible Firmware Packages for SGS4G?

I have to use Heimdall if I'm to flash my phone. At home I only have access to Mac. I used a PC at work to root my phone (superoneclick was waaay easy), but I don't want to push my luck with IT and my boss at work.
Is there a list of Heimdall packages for the SGS4G anywhere? I've been searching and can't find them anywhere. Maybe Heimdall 1.3 is too new??
I am hoping to use Audiophile because it just chaps my a$$ that I can't play a stock music player (TMOUS) without it skipping out (paucity of cpu cycles I imagine). I very much appreciate the post RaverX3X put up about Audiophile recently. However he focused on Odin and I can't use Odin.
Any ideas anyone?

No one has made any firmware packages for it.
You'd only use Heimdall for flashing a stock rom base with a custom kernel and then you'd have to flash audiophile through CWM anyway.
I'd make a firmware package for you if I wasn't on my way out soon though. Maybe if no one else has done it when I get back I'll set something up for you.

Alright I made the heimdall package for you, I haven't tested it though, so proceed at your own risk.
http://sourceforge.net/projects/tea..._kh2_with_kg4_kernel_heimdall.tar.gz/download

Did it work? I want to know so I can post it on the original thread.

You gave some qualifications about using CWM before putting up the Heimdall package. Since this is my first time flashing and I only have my SGS4G so I am going slowly. I got CWM installed and backed up. I downloaded your file and have it on my Mac. Before I try to use, I want to be sure I know what I'm doing. So I'm reading a lot of XDA first.
You will be the second to know I got it installed and working (with me being the first obviously. )
Thanks for the help.

You actually don't need CWM at all. You'll wind up with CWM after flashing this.

Okay, I'll give this one a try. In a previous message you said that after using Heimdall, I still need to flash Audiophile using CWM. Is that still true? Is there any other software I need to flash with CWM?

You might need to flash my busybox_installer.zip but I think Raver may have included that in the audiophile ftw installer.

Well I tried but Heimdall could never see my phone. I can connect USB storage using the phone, but Heimdall can't detect the device at all.
I've searched XDA trying to find MAC drivers for the phone that might be better than mine, but I've not found anything yet.

http://www.glassechidna.com.au/products/heimdall/
Scroll down and find the OSX version (Heimdall suite 1.3.0). It comes with Codeless kext (aka driver). It should install libusb for you.

Hmmm, I installed that package. I do not know why kext didn't work. I know I have a system reboot since then.
Maybe I'll uninstall and try to re-install.

Thanks A Lot
FBis251 said:
Alright I made the heimdall package for you, I haven't tested it though, so proceed at your own risk.
http://sourceforge.net/projects/tea..._kh2_with_kg4_kernel_heimdall.tar.gz/download
Click to expand...
Click to collapse
Hello. First of all I want to thank you for this wonderful rom. I know how to use Odin but recently I got a Mac so I'm still learning how to use it. I decided to upgrade to gingerbread last night and then hell went broke loose I almost BRICKED my phone:-(. But searching the XDA this morning I found this thread and BAAAMMMM my phone is working again. I dunno how it works but I know You put effort on doing this so again Thanks a Lot!!!!!

MjLvMj said:
Hello. First of all I want to thank you for this wonderful rom. I know how to use Odin but recently I got a Mac so I'm still learning how to use it. I decided to upgrade to gingerbread last night and then hell went broke loose I almost BRICKED my phone:-(. But searching the XDA this morning I found this thread and BAAAMMMM my phone is working again. I dunno how it works but I know You put effort on doing this so again Thanks a Lot!!!!!
Click to expand...
Click to collapse
Awesome, I'm glad it worked for you. I'll be making the Froyo portion of the heimdall package available soon in order to update my GB Starter Pack guide for mac/linux.
How straightforward was the install by the way? I'm still trying to get feedback from users.

I am very happy heimdall is working for you and you got the ROM flashed.
Very frustrated that I can't get heimdall to see my phone. I have CWM installed and I have the RootExplorer app working and I can see my SD card as a USB drive on my Mac. Is it possible to flash with just those three tools?
All the guides I see seem to focus on Odin or Heimdall. Do they do some magic that I can't accomplish on my own?

ustamills said:
I am very happy heimdall is working for you and you got the ROM flashed.
Very frustrated that I can't get heimdall to see my phone. I have CWM installed and I have the RootExplorer app working and I can see my SD card as a USB drive on my Mac. Is it possible to flash with just those three tools?
All the guides I see seem to focus on Odin or Heimdall. Do they do some magic that I can't accomplish on my own?
Click to expand...
Click to collapse
Sadly there's no safe way to flash bootloaders using CWM, which is the only reason we're using Odin/Heimdall. I can't diagnose the problems on a mac since I don't own one, but have you tried removing heimdall, restarting, reinstalling, restarting and trying again? Might make it work.

Thanks A Lot
FBis251 said:
Awesome, I'm glad it worked for you. I'll be making the Froyo portion of the heimdall package available soon in order to update my GB Starter Pack guide for mac/linux.
How straightforward was the install by the way? I'm still trying to get feedback from users.
Click to expand...
Click to collapse
Well I mess up with the bootloaders cuz Im coming from trigger rom froyo. But luckily for me I able to put the phone on Download Mode and the Heimdall just detected it. I just follow the read me files on the Heimdall then put your files on it. Press start and it work like magic... I have Gingerbread Phone
---------- Post added at 11:13 PM ---------- Previous post was at 11:12 PM ----------
ustamills said:
I am very happy heimdall is working for you and you got the ROM flashed.
Very frustrated that I can't get heimdall to see my phone. I have CWM installed and I have the RootExplorer app working and I can see my SD card as a USB drive on my Mac. Is it possible to flash with just those three tools?
All the guides I see seem to focus on Odin or Heimdall. Do they do some magic that I can't accomplish on my own?
Click to expand...
Click to collapse
Just try to put your Phone on Download Mode and pray that Heimdall can detect it. Then your good!!!!

i tried flashing my sgs4g with odin and now all i get is the samsung galaxy s 4g from tmobile screen and it just keeps loading like that in a loop.
at first when I tried odin, i was not able to reboot and my screen displayed all sorts of colors and just did not work. I unplugged and tried odin again and came up to this point. now i'm trying to just get my phone working again. help anyone?

[Q] Downgrading KJ6

I want to know how i can downgrade stock KJ6 from samsung kies to KI1 and then root it, or if i can just root KJ6. I tried Superoneclick and some of the stuff on the other threads but nothing helped. Im obviously not rooted.

Make sure you have the most current version of superoneclick. It works.
Sent from my SGH-T959V

Did superoneclick fail? Have you downloaded a root check app from the market to see if you are rooted?
Sent from my SGH-T959V

Odin a modded kernel. You will get root and custom recovery.
Sent from my SGH-T989 using xda premium

Yeah superoneclick freezes and then crashes after "Starting adb server". I have Superoneclick version 2.3.2

And can you please send me the link and instructions on flashing the kernel.

Effort makes a difference on your learning and understanding.
Most current kernal from bhubdven:
http://forum.xda-developers.com/showthread.php?p=20067583
He provides instructions in his thread using heimdall. Afterwards you will be rooted and have CWM and be on your way to a flashing addiction.
Sent from my SGH-T959V

And to help your understandIng there are multiple ways of doing everything. Don't get confused or frustrated reading threads. You have ODIN, Heimdall and CWM to flash things. Right now your options are Heimdall or ODIN until you flash a modded kernel that will give you CWM, which I think is the easiest to do and understand.
Sent from my SGH-T959V

Ok so just to clarify, i have to flash this through Heimdall?

jalaldaniel said:
Ok so just to clarify, i have to flash this through Heimdall?
Click to expand...
Click to collapse
If you don't have CWM already, then yes. I did it that way and it worked quite well.

---------------

stephen_w said:
If you don't have CWM already, then yes. I did it that way and it worked quite well.
Click to expand...
Click to collapse
Im sorry im kind of a noob and i dont understand how to flash this through heimdall. Can you make a video tutorial?

I haven't successfully used Heimdall.
If that doesn't work use ODIN to flash modded KJ1 kernel from here
http://forum.xda-developers.com/showthread.php?p=16160325
That will give you CWM and you can flash the updated bhundven kernal through CWM.
Sent from my SGH-T959V

Did you just ask somebody to make a video tutorial??? Not sure my eyes are working.
Edit: hell stephen is such a nice guy he might just do it. A little bit much to ask though I think.
Sent from my SGH-T959V

jalaldaniel said:
Sorry im kind of a noob. I dont understand how to flash this through heimdall.
Click to expand...
Click to collapse
No worries. They key is to not use the Heimdall-frontend program but rather the Heimdall command-line program. So here's what you need to do:
Go here http://forum.xda-developers.com/showthread.php?p=20067583
Download Heimdall per instruction #1 under "Flashing"
- It doesn't "install" per-se, rather, it's a zip archive. Use Windows/Winzip/7Zip to extract it to a directory of your choosing.
- Once it's extracted, go into the "heimdall-suite-1.3.1-win32" directory, then into the "drivers" directory
- Make sure your phone is plugged into the computer & it's in download mode.
- Run the "zadiag" program
- On the "Options" menu, select "List All Devices"
- Use the drop-down menu to select "Samsung USB Composite Device"
- Click the "Install Driver" button.
- This part might take a minute. Also, if you're on Vista/Win7/2008 and you receive a message about unverified publisher/drivers, install them anyway.
Use Windows/Winzip/7Zip to extract the "sms-T959V-KJ6-0.1.0-unsigned-update.zip" file to a directory of your choosing
- Use Windows Explorer to go into that directory, then into kernel_flasher, and then copy the "zImage" file into the "heimdall-suite-1.3.1-win32" directory
- You don't have to copy it if you're comfortable with using the command line, I just said to do it this way as it's easier. Totally up to you.
Open a command prompt
cd to the "heimdall-suite-1.3.1-win32" directory
Run the command in step 5 under "Flashing" on the page referenced above.
Let us know if you need further help. Good luck
---------- Post added at 10:33 AM ---------- Previous post was at 10:32 AM ----------
lumin30 said:
Did you just ask somebody to make a video tutorial??? Not sure my eyes are working.
Edit: hell stephen is such a nice guy he might just do it. A little bit much to ask though I think.
Sent from my SGH-T959V
Click to expand...
Click to collapse
Not a video...but whatever. LOL. I can't help myself, man. I was a noob here too, once, and I feel compelled to help others that are lost. It's the geek in me I guess.

Hell I am still a noob. I think Heimdall gave me troubles because of the redistributables. Odin and CWM have been easier for me during my journey.
Here are some videos - see if one helps with Heimdall or do the method I suggested.
Google videos on Heimdall

lumin30 said:
Hell I am still a noob. I think Heimdall gave me troubles because of the redistributables. Odin and CWM have been easier for me during my journey.
Click to expand...
Click to collapse
Ditto; I usually learn at least one new thing here a day. I'm just now trying to learn how to use Heimdall. I'm like you & ODIN was what worked for me then CWM once I had it installed. I'm trying to get out of the comfort zone so I have a better understanding of all of the flashing options & hopefully so I can help others. I plan on re-flashing via Heimdall command line later today to see if I can do it right. I'm surprised my phone hasn't blown up from me messing with it so much.
I really want to get into the kernel/OS stuff on it. Trying to find the time to get into it.

stephen_w said:
Ditto; I usually learn at least one new thing here a day. I'm just now trying to learn how to use Heimdall. I'm like you & ODIN was what worked for me then CWM once I had it installed. I'm trying to get out of the comfort zone so I have a better understanding of all of the flashing options & hopefully so I can help others. I plan on re-flashing via Heimdall command line later today to see if I can do it right. I'm surprised my phone hasn't blown up from me messing with it so much.
I really want to get into the kernel/OS stuff on it. Trying to find the time to get into it.
Click to expand...
Click to collapse
Let me know how it goes. Bhundven seems to prefer it which makes me think it is a good method to know.

Thank you both so much. It went perfectly!!!!

You may consider editing your last post and thoroughly explain your steps to help other noobs.
Sent from my SGH-T959V

Help with Valhalla-BlackEdition-2.3.7

its not letting me unmount system in CWM everytime i go to mount/system it says errror mouting/system! I had rc 3.2, i was flashing 3.3 when this happened. help would be greatly appreciated

I'm having the same problem...except I didn't even think to check it since it's normally set to UMMU anyway...so I flashed the ROM and I'm stuck at the Galaxy S 4G logo screen.
I was on Valhalla Black 1.6, or whatever the latest version before the hybrid was. I've tried flashing back to that and a few other ROM's, but none are working. I really need my phone lol.
If anyone has ANY suggestions, please let us know. I am trying currently to install the drivers on my laptop so I can maybe go back to an older set of bootloaders, but something is not working with that either...UGHHHHH

I believe this is a GB issue with most kernels. Try flashing the modded KJ6 kernel, and see if that fixes it.
http://forum.xda-developers.com/showthread.php?t=1380331

A for the issue, I have had a similar issue. To fix it, I used Odin to flash back to Kj6 stock, Odined KH1 then XWM BH's's Kj6 kernel and then flashed the ROM i was currently using, following the instructions exactly and all was good...
I posted this in another thread concerning the battery issue, but it should work for your issue you as I was having the unmount issue with a different ROM and the battery issue at the same time. The ROM was a GB ROM as well (2.3.5)
It cleans out the gremlins
Sent from my SGH-T959V using XDA App

thomas.raines said:
A for the issue, I have had a similar issue. To fix it, I used Odin to flash back to Kj6 stock, Odined BH's's Kj6 kernel and then flashed the ROM i was currently using, following the instructions exactly and all was good...
I posted this in another thread concerning the battery issue, but it should work for your issue you as I was having the unmount issue with a different ROM and the battery issue at the same time. The ROM was a GB ROM as well (2.3.5)
It cleans out the gremlins
Sent from my SGH-T959V using XDA App
Click to expand...
Click to collapse
I'm not able to get past the main bootup screen, so no-go on getting to the market. This is the first time I've had an issue flashing and it's been a few months since I've even wanted to switch ROM's since Valhalla Black worked so well for me.
I flashed the kernel, but still can't change the mount point for /system...tried to flash the ROM anyway cuz I'm a dumbass and still not able to boot. I'm trying to get into ODIN to revert back to a stock GB ROM, or any GB ROM for that matter...my laptop is telling me the drivers weren't installed correctly. ODIN seems to recognize my phone in the yellow box (COM 5) but it doesn't have anything in the box above the yellow COM 5 box. (sorry for all the non-technical terms here).
My process is
1. Install Samsung drivers for 32 bit Windows 7 laptop (verified 32 bit...I've tried the wrong ones on a previous flash)
2. Install ODIN
3. Connect phone to laptop in DL Mode.
Everything is good except the damn drivers issue...bad link for the drivers perhaps??

If Odin says you are connected (yellow box), you should be able to flash. As long as your phone is in dl mode... The box above it fills up while Odin is performing the flashing operation
Sent from my SGH-T959V using XDA App

StonedYoda said:
I'm not able to get past the main bootup screen, so no-go on getting to the market. This is the first time I've had an issue flashing and it's been a few months since I've even wanted to switch ROM's since Valhalla Black worked so well for me.
I flashed the kernel, but still can't change the mount point for /system...tried to flash the ROM anyway cuz I'm a dumbass and still not able to boot. I'm trying to get into ODIN to revert back to a stock GB ROM, or any GB ROM for that matter...my laptop is telling me the drivers weren't installed correctly. ODIN seems to recognize my phone in the yellow box (COM 5) but it doesn't have anything in the box above the yellow COM 5 box. (sorry for all the non-technical terms here).
My process is
1. Install Samsung drivers for 32 bit Windows 7 laptop (verified 32 bit...I've tried the wrong ones on a previous flash)
2. Install ODIN
3. Connect phone to laptop in DL Mode.
Everything is good except the damn drivers issue...bad link for the drivers perhaps??
Click to expand...
Click to collapse
When ever you get into download mode, does windows tell you that the device malfunctioned?

BAleR said:
When ever you get into download mode, does windows tell you that the device malfunctioned?
Click to expand...
Click to collapse
Yes it does. It says it has malfunctioned and/or doesn't recognize the device....

I feel like I was SO close to an answer......crap....

StonedYoda said:
I feel like I was SO close to an answer......crap....
Click to expand...
Click to collapse
Download this. It has the drivers and Odin in it as well as stock KG4 (the PDA, Phone and CSC files). Just don't use the PIT file. That should sqaure you up...
http://forum.xda-developers.com/showthread.php?t=1183413&highlight=kg4

thomas.raines said:
Download this. It has the drivers and Odin in it as well as stock KG4 (the PDA, Phone and CSC files). Just don't use the PIT file. That should sqaure you up...
http://forum.xda-developers.com/showthread.php?t=1183413&highlight=kg4
Click to expand...
Click to collapse
THANK YOU SOOOOO MUCH!!!!!
Man I have been DYING!! HAHA...I now have a working phone again!! I guess now I just have to root it, but that's pretty simple if I remember correctly.
You and Raver are gonna be the 1st people I've donated to. Seriously, you guys rock!

StonedYoda said:
THANK YOU SOOOOO MUCH!!!!!
Man I have been DYING!! HAHA...I now have a working phone again!! I guess now I just have to root it, but that's pretty simple if I remember correctly.
You and Raver are gonna be the 1st people I've donated to. Seriously, you guys rock!
Click to expand...
Click to collapse
Well thank you. I'm just glad I could help. If you Odin one of the GB kernels that have voodoo, you won't have to root and CWM will be installed so you can just flash per the OP...
BTW, Raver is the man. He has helped me so much in my journey of learning...

thomas.raines said:
Well thank you. I'm just glad I could help. If you Odin one of the GB kernels that have voodoo, you won't have to root and CWM will be installed so you can just flash per the OP...
BTW, Raver is the man. He has helped me so much in my journey of learning...
Click to expand...
Click to collapse
Well now I have the same issue I had before...except this time my phone turns on. It is telling me that the drivers aren't installed correctly etc.....so I can't get ODIN to recognize the phone is even there AGAIN!! LOL...I'm trying to reinstall those same drivers but so far no luck...One step forward, 2 steps back haha...any last piece of advice?
---------- Post added at 10:55 PM ---------- Previous post was at 10:41 PM ----------
Nevermind!!! I GOT IT!!! I was able to get ODIN to pick up my phone again...I'm going with the KC1 bootloaders to KJ6 kernel after completely formatting my SD card...THEN to this hybrid Valhalla/CM7 I've been wanting to try ALL EFFING DAY LOL
Thanks again for your patience and help, thomas.raines...as soon as my VA benefits come in next week, you (and Raver, natch) will not be forgotten!! You saved my phone and my sanity, brotha.

Weirdest thing I've ever seen in my Android life. Help!

OK I'm in front of the weirdest thing I've ever seen in my Android life. Turns out I got my Infuse 4G and turn it back to stock AT&T Gingerbread 2.3.6 using Heimdall One-click Back-To-Stock UCLB3, and in the middle of process it seems my USB port disconnected my phone and I though I would see a brick, but thank God it was not that bad (I thought). I change the USB port and put my Infuse in download mode again, passed the tool again and everything went like heaven (again: I thought). I got my stock AT&T Gingerbread 2.3.6, but I never seen CWM anymore, I just can't because the weirdest screen I've ever seen (you'll see).
I thought my phone was unrooted, so I maded my way straight to SuperOneClick v2.3.3 and begin the simplest process. Well... it was unable to root my phone and believe me, it's not ADB problems, I know it because I can install apps through Android Commander without any problem... so that's the first weird thing I have here.
Until that moment I thought my phone was bad-flashed or something, so I tried with another tool, the mythic Odin with h8rift's [UCKD5] Odin - Stock (Root+3e) and with my device in download mode it never shown itself as COM## on Odin (required to start the process), however I clicked on PDA button, selected the .tar.md5 file and start the process that never started (logically).
So right now I have no idea what to do or where to go.
I'm apologize if I explain every little detail, the thing is that most of the time one get answers starting with "You did this?" "Have you tried that?" I all I want is to avoid that. For example, I have USB debugging, ok? Another thing someone could ask.
Please help me guys. I madded a video so you can see what happens when I try to enter CWM. Even when my phone starts, during AT&T logo screen flashes with a strange distortion. I madded this video and post it to YouTube so you can see what is hard for me to explain.
Please HELP!
I need anything that from scratch clean everything and put my phone shiny.
Best regards.

You have "rainbows" because you don't have Gingerbread bootloaders.
You need to use odin a GB leak or Heimdall a GB leak to correct the problem.
Your initial failed flash on heimdall was due to a bad connection -usb data cord or computer usb port.

qkster said:
You have "rainbows" because you don't have Gingerbread bootloaders.
You need to use odin a GB leak or Heimdall a GB leak to correct the problem.
Your initial failed flash on heimdall was due to a bad connection -usb data cord or computer usb port.
Click to expand...
Click to collapse
Man I thank you with all my heart... can you give me some resource? Sorry to bother you with that, the problem is I've been reading since yesterday and my head is about to explode.
Please I'll appreciate it.
Best regards.

Stickied "Super Thread" in Development.
Sent from my SAMSUNG-SGH-I997 using xda premium

Radiotsar said:
Stickied "Super Thread" in Development.
Sent from my SAMSUNG-SGH-I997 using xda premium
Click to expand...
Click to collapse
Thanks, I'll check it right now

alainalemany said:
Man I thank you with all my heart... can you give me some resource? Sorry to bother you with that, the problem is I've been reading since yesterday and my head is about to explode.
Please I'll appreciate it.
Best regards.
Click to expand...
Click to collapse
There are some links on my signature line, including the superthread.

If reading right, you are on uclb3 now. Soc can't root that. I don't think anything can. You have to load another kernel. Like qkster said see his sig. I used both uclb3 packages two night ago. Both work.
(thanks qk)
Sent from my SAMSUNG-SGH-I997 using Tapatalk

Well that is really a super thread... right now I have no idea what to do, where to go. Please can anyone tell me which option take in order to disappear this "rainbows", root my Infuse and finally can install whatever ROM I want?
Best regards.
EDIT: OK I've installed (again) Heimdall UCLB3 2.3.6 but with the Flash Bootloader box checked and everything goes like heaven, NO MORE RAINBOWS However I can't root it with SuperOneClick v2.3.3, why is that? How can I root it?
Best regards.

I see you have not read either the original post
http://forum.xda-developers.com/showthread.php?t=1524081
there clearly says that the only way to root in 2.3.6 is by flashing DD Entropy512's kernel.

kalebdevil said:
I see you have not read either the original post
http://forum.xda-developers.com/showthread.php?t=1524081
there clearly says that the only way to root in 2.3.6 is by flashing DD Entropy512's kernel.
Click to expand...
Click to collapse
OK I flashed Entropy512's kernel correctly but the problem is now I see only Samsung logo, I'm stuck there. However I can see a red CWM.

qkster said:
You have "rainbows" because you don't have Gingerbread bootloaders.
You need to use odin a GB leak or Heimdall a GB leak to correct the problem.
Your initial failed flash on heimdall was due to a bad connection -usb data cord or computer usb port.
Click to expand...
Click to collapse
Why is it that you can go from froyo stock rooted with cwm recovery straight to flashing zeus for example? What step added the gingerbread bootloaders? Just trying to learn myself!
Sent from my SAMSUNG-SGH-I997 using XDA App

SnowBeer said:
Why is it that you can go from froyo stock rooted with cwm recovery straight to flashing zeus for example? What step added the gingerbread bootloaders? Just trying to learn myself!
Sent from my SAMSUNG-SGH-I997 using XDA App
Click to expand...
Click to collapse
from froyo with recovery, you can flash any rom. bypassing the bootloader.
a lot of people do this w/o prob until they run into recovery issue.
i'm not sure re: the exact architecture why this occurs.
the kernel gurus can tell you more.
if you use odin, and install one the gb leaks, you will have that BL, until you do a repartition with gtg's ultimate unbrick which brings you back to froyo. I think you will lose the bl's.
In good practice, I use the 1click heimdall w/ repartition - these are packaged with "official" GB leaks. imho, i believe they are better suited for a base to get to your custom GB rom.
if you're running infused 1.6, there is no needed 'cause it's froyo.
no rainbows there
edit: to each his/her own i guess. the reason why gtg's "unbrick" seems like a life saver is due to repartition with PIT files image.
the heimdall 1 click does the same thing but takes the guess work out from the inexperience user.

[Q] Infuse 4g - Broken CWM - ICS 4.0.4 Infinitum Rom

Hello, I am a long-time viewer of xda but a new member, this is my first post.
(and yes, i looked for a similar theard. i could not find one.)
So, onto the problem.
I flashed Infinitum 1.1.1 to my Infuse using cwm recovery. I noticed problems right off the bat when after i had installed the zip, i rebooted into recovery then it got stuck on the samsung logo and i had to pull the battery (a normal event when flashing this rom) So when i pulled the battery and booted into recovery to try again, the cwm recovery was terribly screwed up. The top half of the screen was pixelated, and the navigation menu was off center. I was still able to use cwm to flash the rom successfully, But cwm remains srewed up.
So i tried to reflash cwm recovery using rom manager. but when i rebooted i was stuck in a recovery boot-loop that i had to get out of using odin.
I then flashed the rom again using the same procedure suggested by its developer, and it worked, but cwm is still acting as it was before. (the pixelated top half of the screen and the off center navigation menu. )
So can i get some help? i thought about removing cwm the using some other recovery. I also heard that cwm wont work on ics, but im unsure what it is.
Thanks in advance.

You don't have Gingerbread bootloaders. That's why recovery looks the way it does.
You need to Odin or Heimdall back to Gingerbread stock (I find Heimdall much easier for this) and then flash Entropy's DD kernel to get back into red recovery to flash Infinitum.
Posts 1 and 2 in this thread are what you need: http://forum.xda-developers.com/showthread.php?t=1524081

lukas_s said:
You don't have Gingerbread bootloaders. That's why recovery looks the way it does.
You need to Odin or Heimdall back to Gingerbread stock (I find Heimdall much easier for this) and then flash Entropy's DD kernel to get back into red recovery to flash Infinitum.
Posts 1 and 2 in this thread are what you need: http://forum.xda-developers.com/showthread.php?t=1524081
Click to expand...
Click to collapse
I i came from froyo, and is there a way to get the bootloaders without reverting to gingerbread stock?

Hard2thexcore said:
I i came from froyo, and is there a way to get the bootloaders without reverting to gingerbread stock?
Click to expand...
Click to collapse
Yeah, ICS recovery doesn't play nice with Froyo bootloaders.
AFAIK, there is no way to get Gingerbread bootloaders without reverting to stock. With Heimdall it's an incredibly simple, and quick process. I just had to do it myself a couple nights ago

lukas_s said:
Yeah, ICS recovery doesn't play nice with Froyo bootloaders.
AFAIK, there is no way to get Gingerbread bootloaders without reverting to stock. With Heimdall it's an incredibly simple, and quick process. I just had to do it myself a couple nights ago
Click to expand...
Click to collapse
Thank man, one more thing, will going back to gingerbread stock work if the only time i have ever used gingerbread was when i used the Zeus rom. The only other thing i have had besides zeus and this ics rom was froyo.

Hard2thexcore said:
Thank man, one more thing, will going back to gingerbread stock work if the only time i have ever used gingerbread was when i used the Zeus rom. The only other thing i have had besides zeus and this ics rom was froyo.
Click to expand...
Click to collapse
Yup, it'll work just fine
Just follow all the instructions for Heimdall to a T (there aren't many) and everything will be fine

Yeah...heimdal is the best way to get bootloaders...odin doesnt always do it and no custom rom includes them that i am aware of...
I had written detailed instructions for another person...ill try and find them and paste it here...
Also-dont use rom manager, that thing is known to cause bricks/bootloops so using it is asking for bad ju-ju lol
Sent from my SAMSUNG-SGH-I997 using XDA

mg2195 said:
Have you tried flashing boot loaders?
Here is how to do it...
1) Download uclb3 heimdal by qckster
2) open the program
3) put phone in download mode
4) click flash (leave program open when finished DO NOT CLOSE)
5) after it finishes and your phone reboots, put the phone back in download mode and reconnect to PC
6) click flash bootloader on the heimdal program you left running
7) flash, let reboot and your problems should be gone
Download mode instructions
1) pull battery
2) put battery back in
3) hold volume up + down
4) connect phone to PC with USB cable *don't let go of volume*
Just because you were on gingerbread previously does nit mean you have ginger bread boot loaders...I had ginger bread since the first leaks and did not have boot loaders until a month or two ago when I flashed them using those steps above...
Good luck!
Sent from my SGH-I997 using XDA
Click to expand...
Click to collapse
There you go...follow those instructions and your cwm will be fixed!!!
Also just added it to my op of infinitum...
Sent from my SAMSUNG-SGH-I997 using XDA

Thank you for posting the guide. I literally just got done flashing GB bootloaders to my Infuse because of the rainbow Recovery when I'm on ICS. I used Odin though and used GB loader that a member posted in the AOKP Uniporn thread. I was scared but there really isn't anything to be afraid of. I tried using Heimdall but dang that was nerve racking because I was trying to use it on Mac and it wouldn't let me do the flash.

Jammol said:
Thank you for posting the guide. I literally just got done flashing GB bootloaders to my Infuse because of the rainbow Recovery when I'm on ICS. I used Odin though and used GB loader that a member posted in the AOKP Uniporn thread. I was scared but there really isn't anything to be afraid of. I tried using Heimdall but dang that was nerve racking because I was trying to use it on Mac and it wouldn't let me do the flash.
Click to expand...
Click to collapse
Good deal, glad you got it sorted out. And to clear up some confusion that is in this thread: you don't have to flash an entire Gingerbread rom to get the bootloaders. We all have our preferred ways of doing it, but you CAN flash just the bootloaders.
Here is both a Heimdall and an Odin way to get JUST the bootloaders. That's all that is necessary for someone who has rainbow distortion issues on an ICS or Gingerbread rom.:
See the third post (HERE) in Entropy512's Unofficial CM9 thread for instructions on how to flash just the bootloaders using the Heimdall command line. Or, see the answer to question 1.) in the FAQ of the rooted UCLB3 Odin thread which is HERE.
mg2195 said:
Yeah...heimdal is the best way to get bootloaders...odin doesnt always do it
Click to expand...
Click to collapse
Heimdall is one way to get the bootloaders, and here's how I did it.:
heimdall flash --primary-boot boot.bin --secondary-boot Sbl.bin
The second part of your statement isn't true. Odin doesn't do it only when the user can't figure out how to use Odin.

thank you everyone.
Being a creature of habit i ended up flashing to rom and bootloaders using odin. that did indeed fix CWM right up.

GB loader
Jammol said:
Thank you for posting the guide. I literally just got done flashing GB bootloaders to my Infuse because of the rainbow Recovery when I'm on ICS. I used Odin though and used GB loader that a member posted in the AOKP Uniporn thread. I was scared but there really isn't anything to be afraid of. I tried using Heimdall but dang that was nerve racking because I was trying to use it on Mac and it wouldn't let me do the flash.
Click to expand...
Click to collapse
I am trying to get those GB Bootloaders. Would you be able to provide them ? or to provide the AOKP Uniport thread ?

RemiChartier said:
I am trying to get those GB Bootloaders. Would you be able to provide them ? or to provide the AOKP Uniport thread ?
Click to expand...
Click to collapse
Unfortunately I haven't had this device for over 3 years now. You'll have to do some searching for that.

Jammol said:
Unfortunately I haven't had this device for over 3 years now. You'll have to do some searching for that.
Click to expand...
Click to collapse
Thanks, I have found the GG boot.bin and sbl.bin in another thread, I will update later on this thread.

RemiChartier said:
Thanks, I have found the GG boot.bin and sbl.bin in another thread, I will update later on this thread.
Click to expand...
Click to collapse
Where did you find them? Please share...