[Q] Automatically Rebooting - Galaxy Note 10.1 Q&A, Help & Troubleshooting

I need some help, I have a Galaxy Note 10.1 GT-N8013 and it keeps rebooting every 5 to 10 minutes? I have installed JB 4.1.1 and everything seems to work very well with the exception of the auto rebooting. The model number in settings says GT-N8000 and the Kernel is 3.0.31-125933, Is there a way to revert back to the original ICS? or is there a solution that someone can suggest to stop the auto reboot?
Thanks!

When you installed JB did you factory reset, clear cache and dalvik cache? This seems to be a major culprit for bad flashes...
Also, the JB you've installed is for the 3G version of the note 10.1. I don't know if that could be the problem either...

ultramag69 said:
When you installed JB did you factory reset, clear cache and dalvik cache? This seems to be a major culprit for bad flashes...
Also, the JB you've installed is for the 3G version of the note 10.1. I don't know if that could be the problem either...
Click to expand...
Click to collapse
Thanks for responding, I went in and cleared my cache and it seems to have worked. Thanks. I am aware that it I have the wrong Note for the JB update but I thought I would try it and see. It works very well but is there a way to get the original ICS back to my Note?

heymikep said:
Thanks for responding, I went in and cleared my cache and it seems to have worked. Thanks. I am aware that it I have the wrong Note for the JB update but I thought I would try it and see. It works very well but is there a way to get the original ICS back to my Note?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1847706
in case you using another region...
go to web samsung-updates.com/device/?id=GT-N8013 (1072.3MB)
download the full stock firmware, flash it use PDA with Odin3.

flymouse said:
http://forum.xda-developers.com/showthread.php?t=1847706
in case you using another region...
go to web samsung-updates.com/device/?id=GT-N8013 (1072.3MB)
download the full stock firmware, flash it use PDA with Odin3.
Click to expand...
Click to collapse
What is the difference between the following two:
1. KIES_HOME_N8013UEALH2_N8013XARALH2_1015435_REV00_user_low_ship.tar.rar (from link you provided)
2. GT-N8013 XAR N8013UEALI3 (from samsung-updates.com/device/?id=GT-N8013 site)
I looked at my Note and it shows GT-N8013EAYXAR Deep Gray GTN8013EYGR, which one of the two will work for my Note?

Related

[Q]How to flash a new update to current rom

Ok, I'm sorry if this has been answered somewhere else on here, however I can not seem to find it and I want to make sure I do this properly! I have rooted my Galaxy Skyrocket and installed the ICS 4.2-5A rom version 4.0.4 and I want to install Seans new update 6B and I wanted to know the steps to apply the update. From what I read I know I do not need to completely wipe my phone and reinstall the rom. Also, will I have to reinstall my radio after I install the update? Thank you to anyone that can help me!
Should be update instructions on the first post of the ROM thread. If not the first post, at least the first page.
it doesn't show me on seans thread.....here it is...http://forum.xda-developers.com/showthread.php?t=1722828
I am just trying to figure out what I need to wipe, if anything. I know I need to put it on my sd card and boot into recovery, just not sure what to do at that point.
Post 2
SKY ICS NONWIPE UPDATES
UPDATE A
IF YOUR STARTING FRESH (PICK A BASE THEN FLASH THIS UPDATE.. )
(DO NOT FLASH A THEN B)(ITS POINTLESS)
Click to expand...
Click to collapse
Just flash, don't wipe.
the only thing is is that i am not starting fresh. im already on the current rom he has up there. so i think i need to pick the B update...so do i still just open the zip file and run it or do i need to wipe something? I thought I needed to atleast wipe the cache and possibly the delvik, but that's why I'm asking! Thanks for your help!
For the update, wipe cache/dalvik then flash the zip. Reboot and enjoy
Sent from my SGH-I727 using Tapatalk 2
Thank you for the help...i will go ahead and do that!
Always make backups just in case it doesnt go as planned. :good:
gsxrchick said:
the only thing is is that i am not starting fresh. im already on the current rom he has up there. so i think i need to pick the B update...so do i still just open the zip file and run it or do i need to wipe something? I thought I needed to atleast wipe the cache and possibly the delvik, but that's why I'm asking! Thanks for your help!
Click to expand...
Click to collapse
You can just flash away. No cache clearing is necessary. I just did it to update from 4.5A to 5B a mere 10 minutes ago.
Mike on XDA said:
You can just flash away. No cache clearing is necessary. I just did it to update from 4.5A to 5B a mere 10 minutes ago.
Click to expand...
Click to collapse
i recommend you wipe cache and dalvik.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
xcrazydx said:
i recommend you wipe cache and dalvik.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
Same here
Sent from my SGH-I727 using Tapatalk 2
OK guys I am on 4.2F-6B...thanks for all the help! The smart stay app will not open and says the beta testing is over...any ideas how I can get this to work? Also the screen keeps flashing no front camera detected, however the front camera works when I go into the camera. Why would this be flashing on the screen?
Sorry to be such a newbie, but I guess we all have to start somewhere!
gsxrchick said:
OK guys I am on 4.2F-6B...thanks for all the help! The smart stay app will not open and says the beta testing is over...any ideas how I can get this to work? Also the screen keeps flashing no front camera detected, however the front camera works when I go into the camera. Why would this be flashing on the screen?
Sorry to be such a newbie, but I guess we all have to start somewhere!
Click to expand...
Click to collapse
On the Sky ICS thread (2 days ago) someone posted a link to a new version. U can probably search on xda / Google to find it or manually go back some pages. It is a .apk so you install it using astro file manager. Hope this helped.
Sent from my Skyrocket i727 running Sky ICS
Here is the new version. http://www.mediafire.com/?5wokm0nh8ym9vza
Sent from my Skyrocket i727 running Sky ICS
gsxrchick said:
OK guys I am on 4.2F-6B...thanks for all the help! The smart stay app will not open and says the beta testing is over...any ideas how I can get this to work? Also the screen keeps flashing no front camera detected, however the front camera works when I go into the camera. Why would this be flashing on the screen?
Sorry to be such a newbie, but I guess we all have to start somewhere!
Click to expand...
Click to collapse
As for saying no front camera I only saw that one time and it was when trying to open the smart stay beta when no longer available. Its nothing to worry about. If your front camera works then in the camera app there isn't anything to worry about. Its just a glitch
Sent from my Skyrocket i727 running Sky ICS

RemICS v1.6 mobile data issue

I have flashed with chinmay_7d's RemICS v1.6 . Yeak it looks cool, but I am facing an issue. When I turn on mobile data usage, the phone will turn off after some time (5-6 minutes) and it is not possible to turn on the phone again . It is needed to plug in it and turn on and then only it is working. In this condition, it is showing android is upgrading. There is no problem with using internet while plugged in. Anyone know how to fix this...? I like this ROM very much and so if it if fixed, then that will be cool.
are u coming from earlier versions of RemICS? followed all the installation steps?, go back to re-flash and tell us
tavomt said:
are u coming from earlier versions of RemICS? followed all the installation steps?, go back to re-flash and tell us
Click to expand...
Click to collapse
Yes I am .Actually this issue was with 1.5.4 also. I have followed all the steps and cleared dalvik Cache and formatted cache partition. I have even done the factory reset and wiped all apps. I think the issue is because, it is reading the battery profile incorrectly or battery is actually drained when mobile data is turned on and that is triggering switch off thing.
alwinaugustin said:
Yes I am .Actually this issue was with 1.5.4 also. I have followed all the steps and cleared dalvik Cache and formatted cache partition. I have even done the factory reset and wiped all apps. I think the issue is because, it is reading the battery profile incorrectly or battery is actually drained when mobile data is turned on and that is triggering switch off thing.
Click to expand...
Click to collapse
Not sure if I'm right, but I think the practical solution to your problem would be to perform a flash from 0 up KPQ or KPU (which are the most stable to install this ROM), it may be the modem or the base ROM you used (for 3 months I have this ROM and never gave me any problems with KPQ)
Another thing, have you tried testing with Dhiru CM9 Base? to see if the same thing happens?
alwinaugustin said:
Yes I am .Actually this issue was with 1.5.4 also. I have followed all the steps and cleared dalvik Cache and formatted cache partition. I have even done the factory reset and wiped all apps. I think the issue is because, it is reading the battery profile incorrectly or battery is actually drained when mobile data is turned on and that is triggering switch off thing.
Click to expand...
Click to collapse
Have you tried to fix permissions on CWM? I got some problems with it too. After fixing and installing 1.5.4 again no problem. Now I'm on 1.6 and all is fine...
@ tavomt :
I think I can directly flash to stock rom.
Please help me
sI have tried fix permission and after that also this issue persists.
Also I have flashed with CM10 alpha from dhiru. This is also showing the same behavior. :crying:
Now flashed with RemICS JB . But the issue is still there. :crying::crying::crying:
I think I need to go back to REMICS 1.0, as there is no issue on it. But I desperately like to use this ROM. If anyone has got a fix, please post and help me.
Sometimes, when I take apps also , the phone gone off (Google Currents and Angry bird )
alwinaugustin said:
Now flashed with RemICS JB . But the issue is still there. :crying::crying::crying:
Click to expand...
Click to collapse
What is your baseband version? Mine is xle4 and have no such problem using remics(kernel bam & chaos) and rem-jb. Try using 2g only for a day, and see if the problem still persist.
Sent from my GT-I9003 using xda app-developers app
issobuddy said:
What is your baseband version? Mine is xle4 and have no such problem using remics(kernel bam & chaos) and rem-jb. Try using 2g only for a day, and see if the problem still persist.
Sent from my GT-I9003 using xda app-developers app
Click to expand...
Click to collapse
my baseband version is I9003DDKP3 . Actually i am using 2G and use 2G network is already ticked
alwinaugustin said:
sI have tried fix permission and after that also this issue persists.
Also I have flashed with CM10 alpha from dhiru. This is also showing the same behavior. :crying:
Now flashed with RemICS JB . But the issue is still there. :crying::crying::crying:
I think I need to go back to REMICS 1.0, as there is no issue on it. But I desperately like to use this ROM. If anyone has got a fix, please post and help me.
Sometimes, when I take apps also , the phone gone off (Google Currents and Angry bird )
Click to expand...
Click to collapse
The issue you are facing is exclusive to you. So i will not consider this a bug from my ROM.
I suggest you to follow correct flashing procedure. Wiping data before flashing a new ROM is a good practice.
It is possible that a third party app you are using is responsible.
Sent from my GT-I9003
Hmmm... but I have tried it also..now I think its better go back to stock . Can anyone give me the URL to download latest stock for our phone.....?
Sent from my GT-I9003 using xda app-developers app
alwinaugustin said:
Can anyone give me the URL to download latest stock for our phone.....?
Click to expand...
Click to collapse
Here?
http://forum.xda-developers.com/showthread.php?t=1133787
Sent from my GT-I9003 using xda app-developers app
Issue persists in Stock also
:crying::crying::crying:
The sad thing is that the problem persists after flashing stock ROM also. I have first flashed to XXKPE and then to XXKPU using Odin as given in the following link
http://blog.vigitalsolutions.com/2012/08/18/upgrade-samsung-galaxy-sl-i9003-to-cyanogenmod-9-cm9/
The issue is there in both the stock ROMS. Actually this issue was not present before. Now don't know what to do. I am only able to connect to internet in plugged in state.
Some times it turns off during call also .
:crying::crying::crying:

Unfortunately, Android keyboard has stopped

I installed CM10 on my AT&T HTC One X and can't type anything as the keyboard keeps crashing. I've searched all over the net for a keyboard to install but everything like Swype requires you install it from the phone directly which I can't type on. Does anyone know of a solution to this crashing issue or somewhere that I can get an alternate KB?
Here's the issue, the keyboard keeps crashing and the home button doesn't work either.. the phone just vibrates when I press it. I installed the CM10 nightly build plus the gapps-jb-20121011-signed.zip GAPPS. I've been searching all over and search keeps breaking on xda so I can't find much on here right now.
-Keith
kelkin said:
I installed CM10 on my AT&T HTC One X and can't type anything as the keyboard keeps crashing. I've searched all over the net for a keyboard to install but everything like Swype requires you install it from the phone directly which I can't type on. Does anyone know of a solution to this crashing issue or somewhere that I can get an alternate KB?
Here's the issue, the keyboard keeps crashing and the home button doesn't work either.. the phone just vibrates when I press it. I installed the CM10 nightly build plus the gapps-jb-20121011-signed.zip GAPPS. I've been searching all over and search keeps breaking on xda so I can't find much on here right now.
-Keith
Click to expand...
Click to collapse
Try rolling back to the most recent stable version.
The new JB keyboard crashes on me whenever I try to save anything, but I'm running it on a Sense rom.
iElvis said:
Try rolling back to the most recent stable version.
The new JB keyboard crashes on me whenever I try to save anything, but I'm running it on a Sense rom.
Click to expand...
Click to collapse
I tried the last stable version too with the same results. Not sure why it keeps crashing on me :/
-Keith
kelkin said:
I tried the last stable version too with the same results. Not sure why it keeps crashing on me :/
-Keith
Click to expand...
Click to collapse
So you can't even interact with the "Select input method" dialogue in the notification pane? Because you should be able to remotely install a new keyboard through Play. Then once it's there, you can switch in the notification pane.
I'm having the same issue. Tried installing CM10 coming from CleanRom. Did a wipe before install.
Not only keyboard for me, home button doesn't work correctly and I cannot launch the browser.
Went back into recovery, flashed CM10 again, preformed not only a factory reset but also did a "system" wipe.
rebooted and things were fine.
rebooted back into recover and installed gapps, things are hosed again.
reproduced on gapps 4.2 and gapps-jb-20121130-signed.zip
phattychops said:
I'm having the same issue. Tried installing CM10 coming from CleanRom. Did a wipe before install.
Not only keyboard for me, home button doesn't work correctly and I cannot launch the browser.
Went back into recovery, flashed CM10 again, preformed not only a factory reset but also did a "system" wipe.
rebooted and things were fine.
rebooted back into recover and installed gapps, things are hosed again.
reproduced on gapps 4.2 and gapps-jb-20121130-signed.zip
Click to expand...
Click to collapse
Same here.. Browser won't open, home and recent apps key don't work also... glad it isn't just me.. So you're fine if you don't install gapps?
-Keith
iElvis said:
So you can't even interact with the "Select input method" dialogue in the notification pane? Because you should be able to remotely install a new keyboard through Play. Then once it's there, you can switch in the notification pane.
Click to expand...
Click to collapse
I can't even log into my google account, I can't get a keyboard to appear to type with.
OK,
Factory Reset and wipe "System"
Install CM10
Use gapps from 1011 - gapps-jb-20121011-signed.zip
Things are working.
phattychops said:
OK,
Factory Reset and wipe "System"
Install CM10
Use gapps from 1011 - gapps-jb-20121011-signed.zip
Things are working.
Click to expand...
Click to collapse
I can't seem to find Wipe "System" in the Factory Reset. The only options I am given to wipe are the data and cache which I have tried doing and afterwards reinstalling CM10 and GAPPS-jb-20121011-signed.zip yet the "Unfortunately Android's Keyboard (ASOP) has stopped working" still pops up
I know you have tried one of these but ill quote what Inflatedtitan gave to me when i had the same problem.
"Sounds like there could be a few problems so were gonna go with the most popular ones lol..
1. Sounds like you didn't wipe everything in twrp before you flashed. Make your you always wipe cache, dalvick, factory reset, and system. Then flash Rom followed by gapps.. then reboot
2. Have you restored from a titanium backup? If so, make sure next time its ONLY user apps.. if you restore system apps and data, think of your system settings from one Rom clashing with the system files from your new Rom. They won't play nice together. Only backup and restore user apps+data
3. If the above steps were taken correctly, I would delete the Rom.zip from phone. Maybe download using a different browser. Chrome browser is notorious for corrupting roms.. you could have had a bad download
Sent from my HTC One XL using Tapatalk 2"
With these steps I got my ROM working so maybe it could help you.
The issue y'all are having is coming from the newest gapps. Install a older gapps and you will be up and running. I had the same issue on my tab 7.0 and hox and reinstalling new gapps worked
Sent from my One X
Same Problem Over Here
majortaylor said:
The issue y'all are having is coming from the newest gapps. Install a older gapps and you will be up and running. I had the same issue on my tab 7.0 and hox and reinstalling new gapps worked
Sent from my One X
Click to expand...
Click to collapse
hi all i have sucessfully installed cm10 on my samsung galaxy s i9000
but i forgot to install gapps.
after installing gapps i just cant type anything it keeps telling me unfortunately andriod keyborad has stopped working.
what do i do?
what version of gapps can install for CM10 Stable?
xdagee said:
hi all i have sucessfully installed cm10 on my samsung galaxy s i9000
but i forgot to install gapps.
after installing gapps i just cant type anything it keeps telling me unfortunately andriod keyborad has stopped working.
what do i do?
what version of gapps can install for CM10 Stable?
Click to expand...
Click to collapse
Ask in the I9000 forums
Sent from my HTC One XL using xda app-developers app
phattychops said:
OK,
Factory Reset and wipe "System"
Install CM10
Use gapps from 1011 - gapps-jb-20121011-signed.zip
Things are working.
Click to expand...
Click to collapse
I had the same problem as others here, keyboard would stop working as soon as my One X started. The above fixed it. I only wiped System, did not Factory Reset. Make sure you're using the above version JB Gapps.
I've seen this issue when I accidentally forget to wipe something. I've found I have to wipe, flash previously working Rom, THEN go back, wipe and install new rom.
Sent from my HTC One X+ using xda app-developers app

S Pen sidebar and S Note issue

Today we got 4.1.2 version for our N8005 3G tablets and I updated through OTA. But I have two problems now;
- When I pull the pen the shortcuts sidebar do not respond, nothing happens. I tried every possible setting in the S Pen toolbar/sidebar settings, but no change. After the update sidebar not working anymore. Do I have to do a factory reset or is there solution for this?
- Mini S note is gone, the one in the bottom center toolbar. In 4.1.2, when I select the S note from bottom toolbar it opens the main S note app with the selection window. But I want the mini note window for fast note taking. Is the mini S note gone with 4.1.2 or my update is bugged somehoıw?
My note 10.1 is never rooted and never installed any illegal or custom apps, mods... When updating to 4.1.2, no errors or issues occured.
Hope someone can help, I really don't want to do factory reset.
PS: I'm not good at English, sorry for any poor word choices.
I'm going crazy because of this, don't care about the S Note issue anymore. I tried anything I can think of and still no S pen shortcuts toolbar. When I pull the pen, it makes a sound, so it's not hardware/detector issue. Here's the list what I've tried so far:
- Factory reset, multiple times
- Installed stock 4.1.2 rom via Odin
- Cleared Galvik Cache, multiple times
- Cleared partition Cache
I'm downloading ICS Stock Rom and gonna try it via odin, hope this will resolve the issue. If not, I don't know what to do else.
andromorph said:
I'm going crazy because of this, don't care about the S Note issue anymore. I tried anything I can think of and still no S pen shortcuts toolbar. When I pull the pen, it makes a sound, so it's not hardware/detector issue. Here's the list what I've tried so far:
- Factory reset, multiple times
- Installed stock 4.1.2 rom via Odin
- Cleared Galvik Cache, multiple times
- Cleared partition Cache
I'm downloading ICS Stock Rom and gonna try it via odin, hope this will resolve the issue. If not, I don't know what to do else.
Click to expand...
Click to collapse
Have you check Setting -> S Pen -> Options after detaching pen?
Sent from my GT-N8000 using xda app-developers app
Yes, I tried that many many times.
After downgraded to ICS S Pen Shortcuts Toolbar started to work again. When I installed the 4.1.2 top of the ICS, problem occured again. This means, the cause of the problem is Samsung, they released a bugged version 4.1.2 for N8005 users. Good work Samsung!
Also several other N8005 users started to report that they have the same problem after the OTA.
So there isn't any solution ?
Only solution is flashing a N8000 4.1.2 Rom to N8005. I'm probably gonna do this in near future, I don't hink they'll fix this issue with a quick update, maybe never. I don't think they give a damn about N8005 users.
Also I found an another issue with the update, Smart Stay will disable itself after a reboot and you need to manually disable and enable it to work again. Maybe there's even more issues with this update, time will tell.
andromorph said:
Only solution is flashing a N8000 4.1.2 Rom to N8005. I'm probably gonna do this in near future, I don't hink they'll fix this issue with a quick update, maybe never. I don't think they give a damn about N8005 users.
Also I found an another issue with the update, Smart Stay will disable itself after a reboot and you need to manually disable and enable it to work again. Maybe there's even more issues with this update, time will tell.
Click to expand...
Click to collapse
I have done the same thing and went for Darkman's fine ROM. I didnt care much phone calling function so my intention was to stay with 8005 firmwares, but after the upgrade I went nuts. How Samsung could have released a firmware with full of bugs?
Sent from my GT-N8000 using xda premium

[Q] Nexus 5 camera does not record video

My wife has Nexus 5 (it is completely stock and unrooted with unlocked bootloader) running running Android 4.4.2. Recently, the stock camera app stopped recording videos. Tapping the record button does not do anything while camera works perfectly in photo mode. I factory reset the phone but the problem persists. Any suggestions? Thanks in advance.
lock the bootloader and send it back
shahidhussain said:
My wife has Nexus 5 (it is completely stock and unrooted with unlocked bootloader) running running Android 4.4.2. Recently, the stock camera app stopped recording videos. Tapping the record button does not do anything while camera works perfectly in photo mode. I factory reset the phone but the problem persists. Any suggestions? Thanks in advance.
Click to expand...
Click to collapse
Try to clear data and cache from camera in settings.
If that doesnt work either and you really have done the factory reset, you have to send it to repair bc of an hardware deffect. :crying:
lichti1901 said:
Try to clear data and cache from camera in settings.
If that doesnt work either and you really have done the factory reset, you have to send it to repair bc of an hardware deffect. :crying:
Click to expand...
Click to collapse
I will try that but I think factory resetting clears cache, anyway. The phone camera worked fine previously but now suddenly it stopped.
Thanks anyway.
I have the same problem, when I change the camera app to record nothing happens when I press the red record button. I think the problem started when I upgraded to 4.4.2
Sent from my Nexus 5 using Tapatalk
shahidhussain said:
I will try that but I think factory resetting clears cache, anyway. The phone camera worked fine previously but now suddenly it stopped.
Thanks anyway.
Click to expand...
Click to collapse
And you flashed the right one? Hammerhead-4.4.2
Like i said before, if that doesnt help, you have to send it back to get a replacement.
You need to uncompress each download before use, which creates a new directory for that exact download. That directory contains a ./flash-all.sh script, which handles the various operations, installs the necessary bootloader, baseband firmware(s), and operating system. Note that this operation deletes all user data by default
Click to expand...
Click to collapse
Make yure that data gets wiped also! Dont forget to backup your sdcard bc it gets also wiped.
lichti1901 said:
And you flashed the right one? Hammerhead-4.4.2
Click to expand...
Click to collapse
I did not flash anything. The phone was OTA updated. Please note that the phone received OTA update and when I applied it, it completed its process but did not update (it was still on older android version) and this happened several times (I mentioned this on a separate thread here on XDA old post).
lichti1901 said:
And you flashed the right one? Hammerhead-4.4.2
Like i said before, if that doesnt help, you have to send it back to get a replacement.
Make yure that data gets wiped also! Dont forget to backup your sdcard bc it gets also wiped.
Click to expand...
Click to collapse
I downgraded Nexus 5 from Android 4.4.2 to 4.4 and now the camera is working fine. But I am afraid of updating it back to 4.4.2.
shahidhussain said:
I downgraded Nexus 5 from Android 4.4.2 to 4.4 and now the camera is working fine. But I am afraid of updating it back to 4.4.2.
Click to expand...
Click to collapse
Flash the whole 4.2.2 stock rom in fastboot bro, i have no issues with video recording both on Dalvik and Art runtime
lichti1901 said:
And you flashed the right one? Hammerhead-4.4.2
Like i said before, if that doesnt help, you have to send it back to get a replacement.
Make yure that data gets wiped also! Dont forget to backup your sdcard bc it gets also wiped.
Click to expand...
Click to collapse
gee2012 said:
Flash the whole 4.2.2 stock rom in fastboot bro, i have no issues with video recording both on Dalvik and Art runtime
Click to expand...
Click to collapse
Yes, I did it. Flashed the stock 4.4.2 and everything seems to work fine. However, when I tried updating using OTA after downgrading the update failed and stopped with "Error" message. After flashing 4.4.2 from scratch will hopefully allow smooth future OTA updates. Thanks everyone.
shahidhussain said:
Yes, I did it. Flashed the stock 4.4.2 and everything seems to work fine. However, when I tried updating using OTA after downgrading the update failed and stopped with "Error" message. After flashing 4.4.2 from scratch will hopefully allow smooth future OTA updates. Thanks everyone.
Click to expand...
Click to collapse
Glad you worked it out!
Good thing is - you got a Nexus, so its easy to flash all the stuff and go back to stock/factory image/recovery/...
:highfive:
Any update on this? I have this exact problem. No unlock, not root just pure OTA stock.
1. Video does not record. You press the red button and no timer comes up.
2. A VID_20140126_224910.mp4.tmp file is created 395.54 KB.
3. Time lapse works as do all the other camera functions.
4. The basic Google FAQ has generic instructions if an app does not work so I followed these.
5. in safe mode the camera works fine.
6. Power off and on again. The Video Camera then works fine and creates normal .mp4 files.
Things I have done that may affected the Camera in the first place;
1. Clear cache.
2. Put a .thumbnails file in DCIM to stop the gigantic .thumbnail folder being created.
3. Running nova launcher.
Unlikely these are a factor as I isolated them as an issue and rebooted but worth a mention just in case.
Camera works but have found the it subsequently stopped working again and had to repeat the Google FAQ steps to fix an app.
To answer my own question I found the uninstalling Said It_1.3.37.apk fixed the problem and just to prove it reinstalling brought the problem back.
---------- Post added at 06:01 PM ---------- Previous post was at 05:27 PM ----------
Quick update. the developer emailed me back. He co firmed it does the same on his device and will send an update.

Categories

Resources