I have flashed with chinmay_7d's RemICS v1.6 . Yeak it looks cool, but I am facing an issue. When I turn on mobile data usage, the phone will turn off after some time (5-6 minutes) and it is not possible to turn on the phone again . It is needed to plug in it and turn on and then only it is working. In this condition, it is showing android is upgrading. There is no problem with using internet while plugged in. Anyone know how to fix this...? I like this ROM very much and so if it if fixed, then that will be cool.
are u coming from earlier versions of RemICS? followed all the installation steps?, go back to re-flash and tell us
tavomt said:
are u coming from earlier versions of RemICS? followed all the installation steps?, go back to re-flash and tell us
Click to expand...
Click to collapse
Yes I am .Actually this issue was with 1.5.4 also. I have followed all the steps and cleared dalvik Cache and formatted cache partition. I have even done the factory reset and wiped all apps. I think the issue is because, it is reading the battery profile incorrectly or battery is actually drained when mobile data is turned on and that is triggering switch off thing.
alwinaugustin said:
Yes I am .Actually this issue was with 1.5.4 also. I have followed all the steps and cleared dalvik Cache and formatted cache partition. I have even done the factory reset and wiped all apps. I think the issue is because, it is reading the battery profile incorrectly or battery is actually drained when mobile data is turned on and that is triggering switch off thing.
Click to expand...
Click to collapse
Not sure if I'm right, but I think the practical solution to your problem would be to perform a flash from 0 up KPQ or KPU (which are the most stable to install this ROM), it may be the modem or the base ROM you used (for 3 months I have this ROM and never gave me any problems with KPQ)
Another thing, have you tried testing with Dhiru CM9 Base? to see if the same thing happens?
alwinaugustin said:
Yes I am .Actually this issue was with 1.5.4 also. I have followed all the steps and cleared dalvik Cache and formatted cache partition. I have even done the factory reset and wiped all apps. I think the issue is because, it is reading the battery profile incorrectly or battery is actually drained when mobile data is turned on and that is triggering switch off thing.
Click to expand...
Click to collapse
Have you tried to fix permissions on CWM? I got some problems with it too. After fixing and installing 1.5.4 again no problem. Now I'm on 1.6 and all is fine...
@ tavomt :
I think I can directly flash to stock rom.
Please help me
sI have tried fix permission and after that also this issue persists.
Also I have flashed with CM10 alpha from dhiru. This is also showing the same behavior. :crying:
Now flashed with RemICS JB . But the issue is still there. :crying::crying::crying:
I think I need to go back to REMICS 1.0, as there is no issue on it. But I desperately like to use this ROM. If anyone has got a fix, please post and help me.
Sometimes, when I take apps also , the phone gone off (Google Currents and Angry bird )
alwinaugustin said:
Now flashed with RemICS JB . But the issue is still there. :crying::crying::crying:
Click to expand...
Click to collapse
What is your baseband version? Mine is xle4 and have no such problem using remics(kernel bam & chaos) and rem-jb. Try using 2g only for a day, and see if the problem still persist.
Sent from my GT-I9003 using xda app-developers app
issobuddy said:
What is your baseband version? Mine is xle4 and have no such problem using remics(kernel bam & chaos) and rem-jb. Try using 2g only for a day, and see if the problem still persist.
Sent from my GT-I9003 using xda app-developers app
Click to expand...
Click to collapse
my baseband version is I9003DDKP3 . Actually i am using 2G and use 2G network is already ticked
alwinaugustin said:
sI have tried fix permission and after that also this issue persists.
Also I have flashed with CM10 alpha from dhiru. This is also showing the same behavior. :crying:
Now flashed with RemICS JB . But the issue is still there. :crying::crying::crying:
I think I need to go back to REMICS 1.0, as there is no issue on it. But I desperately like to use this ROM. If anyone has got a fix, please post and help me.
Sometimes, when I take apps also , the phone gone off (Google Currents and Angry bird )
Click to expand...
Click to collapse
The issue you are facing is exclusive to you. So i will not consider this a bug from my ROM.
I suggest you to follow correct flashing procedure. Wiping data before flashing a new ROM is a good practice.
It is possible that a third party app you are using is responsible.
Sent from my GT-I9003
Hmmm... but I have tried it also..now I think its better go back to stock . Can anyone give me the URL to download latest stock for our phone.....?
Sent from my GT-I9003 using xda app-developers app
alwinaugustin said:
Can anyone give me the URL to download latest stock for our phone.....?
Click to expand...
Click to collapse
Here?
http://forum.xda-developers.com/showthread.php?t=1133787
Sent from my GT-I9003 using xda app-developers app
Issue persists in Stock also
:crying::crying::crying:
The sad thing is that the problem persists after flashing stock ROM also. I have first flashed to XXKPE and then to XXKPU using Odin as given in the following link
http://blog.vigitalsolutions.com/2012/08/18/upgrade-samsung-galaxy-sl-i9003-to-cyanogenmod-9-cm9/
The issue is there in both the stock ROMS. Actually this issue was not present before. Now don't know what to do. I am only able to connect to internet in plugged in state.
Some times it turns off during call also .
:crying::crying::crying:
Related
hi,
I'm using rooted stock v10k rom ,
my phone reboot or shutdown unexpectedly,
I controlled the cpu and battery temprature,
I dont understand why?
I change ROM to Thiaiz3d, still the same
and/or uninstall Setcpu,
I flash an old ROM and use offical LG updater to update,
but still the same
is anyone have an answer?
thanks
I had the same problem when using setcpu. Change settings/profiles or uninstall.
borelis said:
I had the same problem when using setcpu. Change settings/profiles or uninstall.
Click to expand...
Click to collapse
thank you for reply,
I've already uninstall setcpu and I flash a new ROM and never install Setcpu but
problem is not solved
any other posibble solutions you now?
Ive been using set cpu on various roms and have only ever had random reboots since flashing v10k oficcial rom so i doubt setcpu is the cause.
Sent from my LG-P920 using XDA Premium App
Maybe Reflash cwm the completlyy wipe everything like factory reset and dalvik and all that as thats what fixed problems for me before if not then im stuck :/
hope this helps
I also got v10k and Thiaz 1.4 Rom... all scripts running and SetCPU (Profile settings watch screenshots). I have no probs using this combination.
Good battery life and very fast and stable performance.
Sent from my LG-P920
Screenshots:
hefonthefjords said:
Ive been using set cpu on various roms and have only ever had random reboots since flashing v10k oficcial rom so i doubt setcpu is the cause.
Sent from my LG-P920 using XDA Premium App
Click to expand...
Click to collapse
I find anotherthing,
I left the phone fully charged at night, when I woke up in the morning Phone was closed, when I pressed on button it didnt open, after that I pull the battery and try again it opened with a battery level of %55,
can it be because of battery calibration?
dopeypopey123 said:
Maybe Reflash cwm the completlyy wipe everything like factory reset and dalvik and all that as thats what fixed problems for me before if not then im stuck :/
hope this helps
Click to expand...
Click to collapse
I wipe and erase everything that CWR can, nothing change
thanks all for replies,
still cant find a solution
check AcuraTeam ROM BASE 10K KOALA V2 , I set it up and no restarts may be it will work for you too.
arniman said:
check AcuraTeam ROM BASE 10K KOALA V2 , I set it up and no restarts may be it will work for you too.
Click to expand...
Click to collapse
did you used to have random reboots too?
today I flash v10k online with full battery and charger attached, and dont root the phone, its been 4 and a half hour, no reboots for now.
but Im gonna root it at the end, its ridiculous to use android without root, and try acurateam rom
thanks
Hey people.. earlier when i was using ICS there was battery problem.. so i flashed xxkpe but also it became freezing after that I flash ddlf2... the freeze problem stopped... Now again when I flash CM9 Alpha 11... it started freezing can anybody tell me whats the matter?
Give it a while to stabilise. I experience freezing occasionally on all rooms, sometimes even freezes 3 after 3 times I pulled the batt.
Sent from my GT-I9003 using xda app-developers app
bscraze said:
Give it a while to stabilise. I experience freezing occasionally on all rooms, sometimes even freezes 3 after 3 times I pulled the batt.
Sent from my GT-I9003 using xda app-developers app
Click to expand...
Click to collapse
till then what shall I Do? Switch back to ddlf2 again?
anuragvivek93 said:
till then what shall I Do? Switch back to ddlf2 again?
Click to expand...
Click to collapse
Anything will do, depends on which rom you like. If after 1 day it doesn't stabilise idk then.
Sent from my GT-I9003 using xda app-developers app
Wipe Cache/Dalvik and data.
DON'T use the device after the first boot, let it just sit there alone for 10 minutes, reboot it and start using it after, works for me everytime, i guess it's just cache regenerating all over again which can cause slow performance and can get corrupted sometimes causing freezes.
Skander1998 said:
Wipe Cache/Dalvik and data.
DON'T use the device after the first boot, let it just sit there alone for 10 minutes, reboot it and start using it after, works for me everytime, i guess it's just cache regenerating all over again which can cause slow performance and can get corrupted sometimes causing freezes.
Click to expand...
Click to collapse
i tried again today but the freezing dont stop as soon as I flash CM9 from ddlf2
can anybody help?
anuragvivek93 said:
can anybody help?
Click to expand...
Click to collapse
Did you follow the steps ONE BY ONE on the CM9 thread? you should use the flashing from stock method, all of the steps.
If you did that, try another base rom (XXKPU) and then flash CM9 on it.
Skander1998 said:
Did you follow the steps ONE BY ONE on the CM9 thread? you should use the flashing from stock method, all of the steps.
If you did that, try another base rom (XXKPU) and then flash CM9 on it.
Click to expand...
Click to collapse
i could have but last try i tried CM9 it was freezing and i put if offf.... Now the phone is not getting on ? Is phone bricked? i cant go into recovery or download
anuragvivek93 said:
i could have but last try i tried CM9 it was freezing and i put if offf.... Now the phone is not getting on ? Is phone bricked? i cant go into recovery or download
Click to expand...
Click to collapse
If it was working fine before you turned it off, it's probably not a brick.
Maybe it's a hardware failure?
Try using the reset button between the speaker and the camera and try to turn it on (Search to find pictures about it).
If that doesn't work, keep trying to access download, if that also doesn't work, it's probably hardware related, although that in my opinion would be weird.
Hi,
I have rooted my phone and flashed with RemICS -UX 1.0 directly from stock GB 2.3.5 and there was no issue. Then I flashed again with 1.5.3 and 1.5.3 fixed (later) and from this point onwards it starts showing issues. When I turn on mobile data, it will automatically switched off and not able to turn on untill connected to charger or USB. Then I continued flashing with different ROMs like CM9/CM10 Alpha,RemICS -JB ,RemICS 1.6 etc. But the same issue persists. So I flashed with stock ROM. I have first flashed to XXKPE and then to XXKPU using Odin as given in the following link
http://blog.vigitalsolutions.com/2012/08/18/upgrade-samsung-galaxy-sl-i9003-to-cyanogenmod-9-cm9/
The issue is there in both the stock ROMS and it got worse. Now whenever it got network signal the phone will be turned off. If I turn on again, then it will be on for sometime and if a call came, it will turn off. I tried everything. wipe cache,wipe dalvik,factory data etc. But no use. Now don't know what to do with this phone.
Please help
alwinaugustin said:
Hi,
I have rooted my phone and flashed with RemICS -UX 1.0 directly from stock GB 2.3.5 and there was no issue. Then I flashed again with 1.5.3 and 1.5.3 fixed (later) and from this point onwards it starts showing issues. When I turn on mobile data, it will automatically switched off and not able to turn on untill connected to charger or USB. Then I continued flashing with different ROMs like CM9/CM10 Alpha,RemICS -JB ,RemICS 1.6 etc. But the same issue persists. So I flashed with stock ROM. I have first flashed to XXKPE and then to XXKPU using Odin as given in the following link
http://blog.vigitalsolutions.com/2012/08/18/upgrade-samsung-galaxy-sl-i9003-to-cyanogenmod-9-cm9/
The issue is there in both the stock ROMS and it got worse. Now whenever it got network signal the phone will be turned off. If I turn on again, then it will be on for sometime and if a call came, it will turn off. I tried everything. wipe cache,wipe dalvik,factory data etc. But no use. Now don't know what to do with this phone.
Please help
Click to expand...
Click to collapse
Hi! I see you are a new member, perhaps now is the best time to read the forum rules, not that you violated or anything.. just wanna inform you.
Anyway, do a factory reset.. if that does not fix it, flash a stock firmware, not just a stock rom.. flash the whole thing, and of course, do a factory reset
Hope this helps, do report back for your feedbacks! Cheers
Sent from my GT-I9100 using xda premium
Actually what is the different between firmware and ROM. I have flashed with all the three files for PDA,BOOTLOADER and CSC and all.
alwinaugustin said:
Actually what is the different between firmware and ROM. I have flashed with all the three files for PDA,BOOTLOADER and CSC and all.
Click to expand...
Click to collapse
Did flashing get the bootloop fix? on my Sig, there's a clickable.. click on "Index of guides for i9003" go there, it will clarify everything
Sent from my GT-I9100 using xda premium
saywhatt said:
Did flashing get the bootloop fix? on my Sig, there's a clickable.. click on "Index of guides for i9003" go there, it will clarify everything
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
hmm....but nothing is fixed yet. The phone is turned off in between calls or if mobile data is turned on. When I try to turn it on again, it will show the boot animation and is shutting down. It will turn on again if I connect to charger. Then will work until i get a call. It will turn off during the call. don't know what happened actually. I shouldn't have done flashing
Someone please help me.Is there any possibility of getting my phone back to normal behavior ? Very much frustrated as I cannot read news and all .
This same case happened with a friend of mine
He was on CM10
WHAT I DID :-
-Factory Reset>wipe cache>wipe dalvik cache
-then i flashed ddlf2 2 times
And now everything is working fine with him !!
Sent from my Galaxy SL using XDA Premium App !!
simratcs said:
This same case happened with a friend of mine
He was on CM10
WHAT I DID :-
-Factory Reset>wipe cache>wipe dalvik cache
-then i flashed ddlf2 2 times
And now everything is working fine with him !!
Sent from my Galaxy SL using XDA Premium App !!
Click to expand...
Click to collapse
Thanks bro. I will give a try. Also is it needed to enable USB debugging before flashing.. ? I doubt that it was disabled for me when I do the flashing.
alwinaugustin said:
Thanks bro. I will give a try. Also is it needed to enable USB debugging before flashing.. ? I doubt that it was disabled for me when I do the flashing.
Click to expand...
Click to collapse
My usb debugging us always enabled !!
Sent from my Galaxy SL using XDA Premium App !!
simratcs said:
My usb debugging us always enabled !!
Sent from my Galaxy SL using XDA Premium App !!
Click to expand...
Click to collapse
that also not worked..
can anyone please help me.. The problem still persists
Did you check your phone "settings" to make sure that all the phone and service information is there and correct? (apn-imei - data.. Etc)
Sent from my SGH-I897 using Tapatalk 2
spagman72 said:
Did you check your phone "settings" to make sure that all the phone and service information is there and correct? (apn-imei - data.. Etc)
Sent from my SGH-I897 using Tapatalk 2
Click to expand...
Click to collapse
It is showing IMEI and IMEI SV number. But serial number is showing as unknown.
Hi guys.
I installed the latest version of the cm10 & jellybam. Camera & gallery be freeze when I want open them.
Is it normal?
Is there a way to solve this problem?
Yes , we all have it unfortunately...
They say , it's a problem with the camera framework.
It'll get solved in due time.
In the meantime , you can use Defcomg's MIUI ROM , i've seen less occurences in that rom but it still exists.
Not sure if it exists in JellyBAM but give it a try maybe they fixed it. (They stopped whining about it in the thread so...)
If they fixed it , let me know so i can switch to that.
I flashed my phone at least 50 times this week so , i'm kinda sick of it.
You try , i follow.
Cheers!
boltthrower56 said:
Yes , we all have it unfortunately...
They say , it's a problem with the camera framework.
It'll get solved in due time.
In the meantime , you can use Defcomg's MIUI ROM , i've seen less occurences in that rom but it still exists.
Not sure if it exists in JellyBAM but give it a try maybe they fixed it. (They stopped whining about it in the thread so...)
If they fixed it , let me know so i can switch to that.
I flashed my phone at least 50 times this week so , i'm kinda sick of it.
You try , i follow.
Cheers!
Click to expand...
Click to collapse
I think there isn't this problem for all, because some people don't have this problem.
WIPE DALVIK CACHE. I did that and youtube, camera and gallery works perfectly.
Yes it temporarily fixes the problem. Unless you're willing to wipe the dalvik cache on every reboot it remains a problem.
Sent from my LG-P920 using xda premium
boltthrower56 said:
Yes it temporarily fixes the problem. Unless you're willing to wipe the dalvik cache on every reboot it remains a problem.
Sent from my LG-P920 using xda premium
Click to expand...
Click to collapse
I've done it and there is still problem.
When I plug my phone into the charger, work perfectly every things.
when unplug, gallery & camera not works.
has Anyone idea?
Plz help me
Plz help me
try this
i simply did factory reset and flashed cm10 didn't re-install g.apps and all is working well, after having used the rom. Just follow these instructions and you'll be fine
Update your bootloaders to wkparks v1.25a
Sent from my HTC One X+
Ok so it is like this:
I bought my galaxy r here in sweden 1 year and 3 months ago, it was working perfectly for around 1 year.
At the one year mark i started to have some problems with the touchscreen where the phone would feel a pressure in the middle of the screen, to get rid of this i simply locked and unlocked the phone or rubbed a bit with a cloth on the screen.
Recently when I saw there was a cm10.1 rom with nightlies I rooted my phone and later installed the cm10.1 rom. Now the most anoying thing. I have a problem with my battery where the phone just shuts down randomly (mostly when playing games) even though it sometimes have up too 80% battery remaining. Then when I restart the phone it usually have 0% battery left and therefore shuts itself down again, sometimes it restarts with just a 20-30% batteryloss. This have occured more often recently and it shuts itself of 3-4 times a day. I can't remember if it was like this when i was on stock, before I started to flash and root, but i think it was.
A few days ago i flashed stock ics from odin and I confirmed that both of these problems still were there, so i have hard to belive that it is the modding of the software that have caused this.
Do you guys have any suggestions to how i can be able to use my phone normally again?
Im just a poor student so i don't want to waste money on a new phone after just 1 year :/
wipe data and cache..i think after flashing u restore ur data back.
Sent from my GT-I9103 using Tapatalk 4 Beta
Will this help with the battery?
kataria.vikesh said:
wipe data and cache..i think after flashing u restore ur data back.
Sent from my GT-I9103 using Tapatalk 4 Beta
Click to expand...
Click to collapse
Will this help the crashing/battery?
DippN said:
Will this help the crashing/battery?
Click to expand...
Click to collapse
It may be help you but first tell me, are you restoring data from titanium backup or something related to that..??
Also if you want to take backup then take it using Super backup application.
kataria.vikesh said:
It may be help you but first tell me, are you restoring data from titanium backup or something related to that..??
Also if you want to take backup then take it using Super backup application.
Click to expand...
Click to collapse
Nope, im not takeing backup of anything.
And one other thing i forgot to mention earlier, the phone now also thinks it is charging itself evrn when it is not. It think the usb cable is still connected.
I hope OP doesn't mind that I'm joining his thread, I'm experiencing the same problems on my gfs phone and don't know what to do.
I just installed the fresh CM 10.1 nightlies (did Cache/Data/Dalvik Wipe) and she is experiencing pretty much the same problems:
After 1 or 2 hours of unplugging the phone gets stuck and shuts down. After restarting the battery percentage is pretty low and the phone shuts down again (even if the battery says ~10%). The battery percentage then changes every restart, but is always between 0 and 20%. The phone is barely usable in this state :/
I couldn't wipe the SD card (.android_secure) because the swapped paths, could this be related?
Thank you in advance!
paKS7 said:
I hope OP doesn't mind that I'm joining his thread, I'm experiencing the same problems on my gfs phone and don't know what to do.
I just installed the fresh CM 10.1 nightlies (did Cache/Data/Dalvik Wipe) and she is experiencing pretty much the same problems:
After 1 or 2 hours of unplugging the phone gets stuck and shuts down. After restarting the battery percentage is pretty low and the phone shuts down again (even if the battery says ~10%). The battery percentage then changes every restart, but is always between 0 and 20%. The phone is barely usable in this state :/
I couldn't wipe the SD card (.android_secure) because the swapped paths, could this be related?
Thank you in advance!
Click to expand...
Click to collapse
Im just glad im not alone with this problem, and as you said, its barely unusable without having it plugged in.
DippN said:
Im just glad im not alone with this problem, and as you said, its barely unusable without having it plugged in.
Click to expand...
Click to collapse
paKS7 said:
I hope OP doesn't mind that I'm joining his thread, I'm experiencing the same problems on my gfs phone and don't know what to do.
I just installed the fresh CM 10.1 nightlies (did Cache/Data/Dalvik Wipe) and she is experiencing pretty much the same problems:
After 1 or 2 hours of unplugging the phone gets stuck and shuts down. After restarting the battery percentage is pretty low and the phone shuts down again (even if the battery says ~10%). The battery percentage then changes every restart, but is always between 0 and 20%. The phone is barely usable in this state :/
I couldn't wipe the SD card (.android_secure) because the swapped paths, could this be related?
Thank you in advance!
Click to expand...
Click to collapse
Both of you install CM10.1 using Procedure no 2 from OP.
kataria.vikesh said:
Both of you install CM10.1 using Procedure no 2 from OP.
Click to expand...
Click to collapse
Will try that when i get home, thx.
kataria.vikesh said:
Both of you install CM10.1 using Procedure no 2 from OP.
Click to expand...
Click to collapse
Thank you, vikesh! I'll be able to try Procedure II tomorrow afternoon.
paKS7 said:
Thank you, vikesh! I'll be able to try Procedure II tomorrow afternoon.
Click to expand...
Click to collapse
Sadly, I can confirm that this did not change anything.
The problems are still there :/
DippN said:
Sadly, I can confirm that this did not change anything.
The problems are still there :/
Click to expand...
Click to collapse
It shouldn't be happened. But if u are feeling so, just flash any stock GB using odin v1.87. Then just wipe all data and cache. Install cm10.1 over that using method 2.
Sent from my GT-I9103 using xda premium
kataria.vikesh said:
It shouldn't be happened. But if u are feeling so, just flash any stock GB using odin v1.87. Then just wipe all data and cache. Install cm10.1 over that using method 2.
Sent from my GT-I9103 using xda premium
Click to expand...
Click to collapse
I'm definitely going to try this, but as it seems now i think it is more about a faulty battery/hardware that software?
Or have these kind of problems been fixed software before?
One other thing, if i have rooted my device, does the root dissappear when i flash stockrom using odin?
DippN said:
I'm definitely going to try this, but as it seems now i think it is more about a faulty battery/hardware that software?
Or have these kind of problems been fixed software before?
One other thing, if i have rooted my device, does the root dissappear when i flash stockrom using odin?
Click to expand...
Click to collapse
May be hardware or software too..when you will vanish all data & cache then Software issue may be gone but if problem still persist, means you have hardware problem.
Also, root will be lost after flashing Stock ROM from ODIN.
I'm able to also confirm, that Procedure II didn't help the problem. I really doubt it is a hardware fault, because of us two having the exact same problem after flashing the same rom.
@Dippn: Do you know which nightly build you used? In my case it was the nightly build "20130405". Also could you check which baseband you are on? (Under About Phone -> Baseband Version) Over here we have i9103NEKI1
The only special thing we did I can think of is flashing a modem file (when we were still on the unofficial cm10.1 without these kind of problems, but massive battery drain), because there was a call problem going on for customers of the austrian provider 3 and CM10.1.
I could analyse the problem a bit more today: It seems as soon as the phone gets busy (for example from the browser loading pages or in DippN's case processing a game), the touch screen gets unresponsive and everything starts to lag and delay or freezes completely until it shuts down the phone. Could be either CPU or RAM related, I guess. I just wonder what caused this, even if the nightly had a faulty kernel, this should be fixed as soon as we flash another ROM, right?
I will be able to try a different ROM on monday. It would be great, if you could report, if the downgrade to GB helped the issue. I'd like to try a different baseband, if you are on the same right now too.
Greetings and thank you so much for trying to help us, vikesh!
paKS7 said:
I'm able to also confirm, that Procedure II didn't help the problem. I really doubt it is a hardware fault, because of us two having the exact same problem after flashing the same rom.
@Dippn: Do you know which nightly build you used? In my case it was the nightly build "20130405". Also could you check which baseband you are on? (Under About Phone -> Baseband Version) Over here we have i9103NEKI1
The only special thing we did I can think of is flashing a modem file (when we were still on the unofficial cm10.1 without these kind of problems, but massive battery drain), because there was a call problem going on for customers of the austrian provider 3 and CM10.1.
I could analyse the problem a bit more today: It seems as soon as the phone gets busy (for example from the browser loading pages or in DippN's case processing a game), the touch screen gets unresponsive and everything starts to lag and delay or freezes completely until it shuts down the phone. Could be either CPU or RAM related, I guess. I just wonder what caused this, even if the nightly had a faulty kernel, this should be fixed as soon as we flash another ROM, right?
I will be able to try a different ROM on monday. It would be great, if you could report, if the downgrade to GB helped the issue. I'd like to try a different baseband, if you are on the same right now too.
Greetings and thank you so much for trying to help us, vikesh!
Click to expand...
Click to collapse
Well, we are not on the same baseband. I'm on I9103XXLQ3.
About the cm verison im not quiet sure, the latest i flashed was "20130406" but since the problem were there the time before that when i flashed cm I cant answer exacly but i have a cm version "20130305" on my desktop and it could be that one that I used.
I never used cm before it was on nightlies so the modem file flashing i dont know anything about.
The thing you mention about that it shuts of when the phone gets busy and touchscreen gets unresponsive I can kind of confirm too.
I will flash GB now, will report back in an hour how it went.
kataria.vikesh said:
It shouldn't be happened. But if u are feeling so, just flash any stock GB using odin v1.87. Then just wipe all data and cache. Install cm10.1 over that using method 2.
Sent from my GT-I9103 using xda premium
Click to expand...
Click to collapse
Are you sure i should do it using v1.87?
I'm having problems finding it and v1.85 seems to be in everyones links.
DippN said:
Are you sure i should do it using v1.87?
I'm having problems finding it and v1.85 seems to be in everyones links.
Click to expand...
Click to collapse
Flashed GB using v1.85 and now I am stuck in bootloop, after 10 sec at the samsung logo it restarts and repeat. >.>
When the phone restarted after the flash and after it says "-updating application" it says:
Installing Multi-CSC
Can't access to '/system/csc/NEE/system/'.
Successfully applied multi-CSC.
I have no idea what this means but could it mean anything?
EDIT: I got it to start by wipe cache and data. (thought i should do that when cwm was installed)
Unfortunately already in the startup options when u write wifi password the touchscreen became very unresponsive and when i after a few min had succeded writing the password the phone shut of when it tried to connect to it! :,(
I can also confirm that it still thinks it is charing when it is not becuase the symbol in the statusbar flicked from battery to charging symbol.
Is there anything else softwarerelated that I can do?
DippN said:
Flashed GB using v1.85 and now I am stuck in bootloop, after 10 sec at the samsung logo it restarts and repeat. >.>
When the phone restarted after the flash and after it says "-updating application" it says:
Installing Multi-CSC
Can't access to '/system/csc/NEE/system/'.
Successfully applied multi-CSC.
I have no idea what this means but could it mean anything?
EDIT: I got it to start by wipe cache and data. (thought i should do that when cwm was installed)
Unfortunately already in the startup options when u write wifi password the touchscreen became very unresponsive and when i after a few min had succeded writing the password the phone shut of when it tried to connect to it! :,(
I can also confirm that it still thinks it is charing when it is not becuase the symbol in the statusbar flicked from battery to charging symbol.
Is there anything else softwarerelated that I can do?
Click to expand...
Click to collapse
Wipe data again.. If possible after wiping data Just reflash the GB.