I F***ED MY PHONE UP D:
I downgraded from ics because I flashed cm10 and it didn't work.
I think I was on ics leak 2
The fxz failed on flashing boot loader
Tanmaynarang said:
I F***ED MY PHONE UP D:
I downgraded from ics because I flashed cm10 and it didn't work.
I think I was on ics leak 2
The fxz failed on flashing boot loader
Click to expand...
Click to collapse
Oh and It just won't turn on
http://forum.xda-developers.com/showthread.php?t=1937112
Related
Alright so when I want to flash stock using gtg unbrick then master clear.
Then move the rom to the sd card, then flash community kernal
Then wipe x3 then flash rom.
From what I get this is the best way to install froma clean slate but will I be on gb bootloaders?
thanks
Sent from my SAMSUNG-SGH-I997 using XDA App
-bump bump bump-
I think if you're able to flash the ROM and it runs fine, you don't need anything else.
If you really wanted to make sure you have gb boot loader s, check out Adam outler's post one click uckj4 with boot loader s. Dev section
Wtf... you forgot 3e recovery..
And just flash the community kernel. Gb loaders and red cwm. Done...
Sent from my A500 using Tapatalk
I really don't know about the Boot loaders with Infuse coz i never flashed any BL on it the way we did/do on captivate.
From Gtg you can flash any rom from the DEV section.......I am saying this from my own experience, Even i jump ROm to ROM without going back to stock and till today have not faced any problem. Last I flashed ZEUS over MIUI without a problem and is working GREAT.
Erik_T said:
Wtf... you forgot 3e recovery..
And just flash the community kernel. Gb loaders and red cwm. Done...
Sent from my A500 using Tapatalk
Click to expand...
Click to collapse
community kernal gives me red recovery
and your saying that community kernal includes gb bootloaders?
Yes community ker gives u red recovey.
rkkaranrk said:
Yes community ker gives u red recovey.
Click to expand...
Click to collapse
Isn't it fine to flash from red recovery?
basically is what I'm doing correct or am I missing something?
Sent from my SAMSUNG-SGH-I997 using XDA App
Yes u are fine with it just go ahead.
Sent from my SAMSUNG-SGH-I997 using Tapatalk
if you ever flashed gb bootloaders then you still have them, lost1 posted some untested froyo bootloaders but noone really knows if they work or has included then in an Odin package, the kh1 froyo update has sbl.bin but I don't think it had boot.bin. I wouldn't recommend ever flashing it because I don't know if the froyo sbl.bin is compatible and would assume not.
if you want gb bootloaders then flash a gb leak from prezkret then flash stock. if you are OK with heimdall then I have gb bootloaders in a package for it. once you are on gb bootloaders I suggest keeping them on there.
Dani897 said:
if you ever flashed gb bootloaders then you still have them, lost1 posted some untested froyo bootloaders but noone really knows if they work or has included then in an Odin package, the kh1 froyo update has sbl.bin but I don't think it had boot.bin. I wouldn't recommend ever flashing it because I don't know if the froyo sbl.bin is compatible and would assume not.
if you want gb bootloaders then flash a gb leak from prezkret then flash stock. if you are OK with heimdall then I have gb bootloaders in a package for it. once you are on gb bootloaders I suggest keeping them on there.
Click to expand...
Click to collapse
thanks for the info
what do you mean by "once you are on gb bootloaders I suggest keeping them on there"
like what exactly would move me back to froyo bl ? would using gtg unbrick move me back to froyo bootloaders or you mean actually flashing another set of them?
The_Zodiac said:
thanks for the info
what do you mean by "once you are on gb bootloaders I suggest keeping them on there"
like what exactly would move me back to froyo bl ? would using gtg unbrick move me back to froyo bootloaders or you mean actually flashing another set of them?
Click to expand...
Click to collapse
no only the kh1 leak and the dump from lost1 had any bootloaders. you would have to do it intentionally. just wasn't sure if you wanted information on returning everything to stock for warranty reasons.
Dani897 said:
no only the kh1 leak and the dump from lost1 had any bootloaders. you would have to do it intentionally. just wasn't sure if you wanted information on returning everything to stock for warranty reasons.
Click to expand...
Click to collapse
thanks i was just trying to make sure
hello,
i am a first time poster on here. i have been very thankful for all help i have read about thus far. i have a NS4G and i just couldnt wait for ICS 4.0.4 and was looking around and foud the IMM26 build and instructions how to install it with Odin. followed all the directions to a T, but then all my friends were getting the OTA and it is IMM76d. i habe tried installing the IMM76d with odin 1.85 and it fails, now i know its been said that one may have to use an HTC usb cord and i do. i also have tride to do the recovery mode and apply the downloaded imm76d update renamed it update.zip ans that aborts showing a status 7 error.. i am lost. i dont want to be rooted or have an unlocked bootloader. i would just like to know how to return my phone to 2.3.7 and all factory settings so i can receive the OTA from sprint. i would greatly appreciate any help or direction to solve my issue
thanks in advance
This'll put you back on 2.3.7. (Well, 2.3.4, but then you'll get all of the OTAs until 2.3.7 and then possibly 4.0.4 if it's actually rolling out in your area)
http://forum.xda-developers.com/showthread.php?t=1167819
u could root and unlock the boot loader flash to 2.3.7 then unroot and relock boot loader and wait for ur ICS update
Sent from my Nexus S 4G using XDA Premium App
neo_x22000 said:
u could root and unlock the boot loader flash to 2.3.7 then unroot and relock boot loader and wait for ur ICS update
Sent from my Nexus S 4G using XDA Premium App
Click to expand...
Click to collapse
i am guessing there is a how to do this exactly somewhere here.
AT&T replaced my Infuse (which I was running JB and before that ICS), so I have a brand new phone.
Came stock with G 2.3.6.
I was able to flash jscott30 2.3.6 Gingerbread with root and CWM recovery option - link below. I chose option C. Phone is running great.
http://forum.xda-developers.com/showthread.php?t=1613523
However, when I try to upgrade to a custom ICS or JB rom (doesn't matter which one) from CWM, the phone soft-bricks - meaning when it resets it's either stuck in Samsung boot loop or that crashed recovery loop.
I have to reflash in download mode to the link above, which thankfully works!
Bottom line - I can't flash any ICS or JB and can't figure out what the deal is. I had no problems flashing before with my old Infuse.
I'm clearly doing something wrong - any ideas? I know I'm not providing a lot of info, but I'm following each flash instruction to the letter (in each OP).
Thanks for any insight!
I don't want to wait for Samsung to upgrade to ICS - if they ever do.
I know it might be a dumb awnser/reply. But did u happen to pull battery out and reflash after it froze? Sometimes that helps. If u have there is nothing wrong from starting back from the start.. cm9 I use for my ICS boot loaderz and then I try whatever else I want. But I always start from. Ginger bread to entropy cm9
sent with my jelly SGH-I997R
jester12345 said:
I know it might be a dumb awnser/reply. But did u happen to pull battery out and reflash after it froze? Sometimes that helps. If u have there is nothing wrong from starting back from the start.. cm9 I use for my ICS boot loaderz and then I try whatever else I want. But I always start from. Ginger bread to entropy cm9
sent with my jelly SGH-I997R
Click to expand...
Click to collapse
Yeah, I do pull battery.
Where can I find the entropy cm9? Thanks!
Have u tried a different ROM. I had problems before with corrupt d/L's
Just some suggestions for thought
sent with my jelly SGH-I997R
jester12345 said:
Have u tried a different ROM. I had problems before with corrupt d/L's
Just some suggestions for thought
sent with my jelly SGH-I997R
Click to expand...
Click to collapse
Yes, I've tried many different ROMs. Each fails. So weird.
Which CWM do you have. I know that after I flashed the rooted GB version, I then flashed the Heimdall ICS recovery and CWM went to blue version. Then very easy to install ROMs.
Sent from my SGH-I997 using xda premium
psal217050 said:
Which CWM do you have. I know that after I flashed the rooted GB version, I then flashed the Heimdall ICS recovery and CWM went to blue version. Then very easy to install ROMs.
Sent from my SGH-I997 using xda premium
Click to expand...
Click to collapse
Red 2.5.1.3
Should I flash the blue? Thanks.
delfinparis said:
Red 2.5.1.3
Should I flash the blue? Thanks.
Click to expand...
Click to collapse
Yes.
psal217050 said:
Yes.
Click to expand...
Click to collapse
There shouldn't be any need to manually install CWM, as the ROM zips have the udated CWM built into them. Since you're coming from GB, the first reboot after installing ICS or JB, should boot you into the new BLUE CWM, after which you may need to format System, and flash again. Also, have you removed your External SD card before flashing? That's caused problems for some people.
My concern is that he said he flashed ICS but still has red CWM. I suggested Heimdall ICS recovery to get him to blue. I am relatively new but that is what I had to do to get ICS on the phone. But I am sure that there are other methods too.
Sent from my SGH-I997 using xda premium
Yep - did the Heimdall and it pushed me to blue CWM. I'm good now!
Just flashed ParanoidAndroid ICS and it's working.
thanks!
psal217050 said:
My concern is that he said he flashed ICS but still has red CWM. I suggested Heimdall ICS recovery to get him to blue. I am relatively new but that is what I had to do to get ICS on the phone. But I am sure that there are other methods too.
Sent from my SGH-I997 using xda premium
Click to expand...
Click to collapse
Odd. Never ran into that issue yet, and, as such, didn't notice that there was a Heimdall ICS one-click kernel floating about. Great advice.
Hello, i went from Magicmod cm10 to NUMA, the installation proceeded correctly. Then I reebooted the phone and it stuck in the NUMA boot animation.
Already tried FXZ back to 2.3.5 but it gives me flash failure 5/19 flash cdt.bin. Really Don't know what to do, any help will be appreciated
Thanks in advance
Tried again and it says 5/20 reboot-bootloader, did i just hardbricked?? please help
Joseaiz said:
Hello, i went from Magicmod cm10 to NUMA, the installation proceeded correctly. Then I reebooted the phone and it stuck in the NUMA boot animation.
Already tried FXZ back to 2.3.5 but it gives me flash failure 5/19 flash cdt.bin. Really Don't know what to do, any help will be appreciated
Thanks in advance
Tried again and it says 5/20 reboot-bootloader, did i just hardbricked?? please help
Click to expand...
Click to collapse
Nope, u using the wrong FXz script try the ICS one mate. Correct me if I'm wrong but u shouldn't be trying to FXz back to 2.3.5
Sent from my SuperCharged CM10 MB865
triloger said:
Nope, u using the wrong FXz script try the ICS one mate. Correct me if I'm wrong but u shouldn't be trying to FXz back to 2.3.5
Sent from my SuperCharged CM10 MB865
Click to expand...
Click to collapse
well that's what I did, i should have used Jim's script. That happens when you don't read, now my phone it's totally bricked :crying:
Correct no one should be trying to fxz back to gingerbread with the ICS fxz out. Hopefully your phone's under warranty mate?
Sent from my SGH-I727 using xda premium
I'm running a XT925 on Rogers and went through the JB update months ago. Things didn't go smoothly and it looks like my modem didn't get the update. Current info:
Version:
4.1.2
Baseband:
VANQUISH_U_BP_1045.711.53.62P
Build Number:
9.8.2Q-8-XT925_VQL_12.2
Rooted but bootloader is locked
Does anyone know if it is possible to flash just the JB Roger's modem? Or an recommendations on how to wipe and apply the JB update properly?
Thx in advance!
Zimzum
You could flash back to stock JB using RSD or you could download the fastboot files and flash the modem manually using fast boot.exe from the android SDK but with the locked BL you might not be able to only flash the modem
Sent from my XT925 using xda app-developers app
saloums7 said:
You could flash back to stock JB using RSD or you could download the fastboot files and flash the modem manually using fast boot.exe from the android SDK but with the locked BL you might not be able to only flash the modem
Click to expand...
Click to collapse
Just to confirm: I can flash stock JB overtop of what I have without unlocked bootloader? If yes, that is great news indeed!
ZimZum
zimzum57 said:
Just to confirm: I can flash stock JB overtop of what I have without unlocked bootloader? If yes, that is great news indeed!
ZimZum
Click to expand...
Click to collapse
Yes with RSD. But it will wipe your device and you will have to remove the lines that have the "getvar" command in the XML in the zip
Sent from my XT925 using xda app-developers app
saloums7 said:
Yes with RSD. But it will wipe your device and you will have to remove the lines that have the "getvar" command in the XML in the zip
Click to expand...
Click to collapse
Awesome. I'll give it a shot this weekend and let you know how it goes. Thanks for the reply!
SUCCESS! A big thanks for the tip. Reception is 10x better now.
For the money, you cannot beat this thing. I think it's crazy that Motorola stopped making them.
/Zim