CyanogenMod 9 is a free, community built distribution of Android 4.0 (Ice Cream Sandwich) which greatly extends the capabilities of your phone.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
This phone isn't my daily driver, so I only tested a few things, and only slightly:
Known Bugs:
BLN is wonky. This is a CM9 thing and applies pretty much to all the msm8660 devices that use the cypress-touchkey BLN driver. Unlikely to be fixed
Other things maybe? Discuss in the thread...
How to get it:
Download: http://get.cm/?device=t769 (ChangeLog)
Or download it directly through ROM Manager or CM Updater.
Google Apps:
Make sure to download and install the ICS GApps
http://goo.im/gapps/gapps-ics-20120429-signed.zip
IF YOU ARE COMING FROM ANOTHER ROM, PLEASE MAKE SURE TO DO A FACTORY/DATA RESET BEFORE USING THIS. This isn't up for debate. A reset of the dalvik cache helps too. If you do a dirty flash, please make sure to do a dalvik cache wipe. If you have searched this forum for a problem and haven't found it, please do a nandroid backup, then a full factory/data reset and check to see if you still have the problem. If it still persists AFTER the factory/data reset, then report it here.
Thank You!
CyanogenMod Team (all of you, seriously, you guys are awesome)
SGH-T989 Devs (all of you, cuz I basically stole all your configs)
ShabbyPenguin & PlayfulGod for encouraging me when times looked grim.
UberPinguin and others on #jb-dev-e4gt for helping me get all of this work into CM proper
Oreo, my dog, for licking me whenever I needed it.
Older/Unofficial Versions (don't use if you can help it).
For older/legacy/test/unofficial versions of my work, you can find them (for a while at least) here: My Funhouse. Please take care and all necessary steps to verify MD5 sums before installing any zips.
Since CM9 is not a moving target like CM10, it may be some time before we get a point release. Therefore the occassional CM9 Nightly will have to do.
I'm not creating a Q&A thread for this one. Please behave yourselves and be nice to your neighbors.
That is all
Nice work getting it official man
----------------------------------------------
If helped don't be afraid to hit the thanks button it doesn't bite lol
erikmm said:
Nice work getting it official man
Click to expand...
Click to collapse
Thanks. This should be fairly complete too. There isn't much else I can do for it. People feel it's stable and like it.
Also, it's good that the repos are up. That means people can build/maintain roms for some of the cm derivatives. I'm actually curious to see what ParanoidAndroid looks like on this device. Been meaning to load up thomas.raines work
does cm9 have wifi calling?
Bradlees said:
does cm9 have wifi calling?
Click to expand...
Click to collapse
no it doesnt.
dr4stic said:
Thanks. This should be fairly complete too. There isn't much else I can do for it. People feel it's stable and like it.
Also, it's good that the repos are up. That means people can build/maintain roms for some of the cm derivatives. I'm actually curious to see what ParanoidAndroid looks like on this device. Been meaning to load up thomas.raines work
Click to expand...
Click to collapse
Lol yea that's true I got aokp-jb and ics almost complete so again thanks for the work
----------------------------------------------
If helped don't be afraid to hit the thanks button it doesn't bite lol
I've been using this due to the stability over cm10. Good stuff!
Hardkeys illumination
Been wondering what changed from cm-9-20121025-UNOFFICIAL-t769 to cm-9-20121030-NIGHTLY-t769? I did a dirty flash (wiping dalvik only) coming from unofficial to nightly and I notice the hardkeys won't illuminate after screen timeout / unlock. After I wait off the set button light timeout (mine is set to 6s) the keys once again illuminate and this doesn't reoccur until the screen goes out again. Anyone else experiencing this?
lnxzilla said:
Been wondering what changed from cm-9-20121025-UNOFFICIAL-t769 to cm-9-20121030-NIGHTLY-t769? I did a dirty flash (wiping dalvik only) coming from unofficial to nightly and I notice the hardkeys won't illuminate after screen timeout / unlock. After I wait off the set button light timeout (mine is set to 6s) the keys once again illuminate and this doesn't reoccur until the screen goes out again. Anyone else experiencing this?
Click to expand...
Click to collapse
Yeah, that's the BLN (button lights notification) bug listed at the top. Incidently, the driver/kernel should be identical from 10/25 to 10/30, which is where that bug lives.
dr4stic said:
Yeah, that's the BLN (button lights notification) bug listed at the top. Incidently, the driver/kernel should be identical from 10/25 to 10/30, which is where that bug lives.
Click to expand...
Click to collapse
I see, tnx for the clarification as it was my understanding the issue only occurs when the lights are actually used for notifications hence the BLN name. Oddly enough I didn't notice this happening when I was running the unofficial build, must have been a coincidence then I suppose.
CM9 after 11/2 will contain WiFi Random MAC fix
Folks,
The next nightly build (they happen weekly) for CM9 will contain the WiFi Random MAC bug fix. This will
This completes the list of bugs to be fixed for CM9.
The change went in after 11/2, so pick up the nightly that comes out after that. Otherwise I'm also posting a flashable zip file in my funhouse to hold you guys over till a new nightly for CM9 is available. I'm not actually sure when they run
dr4stic said:
Folks,
The next nightly build (they happen weekly) for CM9 will contain the WiFi Random MAC bug fix. This will
This completes the list of bugs to be fixed for CM9.
The change went in after 11/2, so pick up the nightly that comes out after that. Otherwise I'm also posting a flashable zip file in my funhouse to hold you guys over till a new nightly for CM9 is available. I'm not actually sure when they run
Click to expand...
Click to collapse
I am using an external SD card for my apps rather than the internal flash. After I applied the kernel zip, my memory change to internal. No big deal I thought, so I changed it to external, and did a reboot. After reboot, the check box is unchecked, but looking at the app manager, it still shows the internal flash first. Thankfully, I did a backup first, so I am restoring now. Is this a know issue? Sorry if it has been asked before but I did not see it in the thread. Thanks again for your work......
boulos said:
I am using an external SD card for my apps rather than the internal flash. After I applied the kernel zip, my memory change to internal. No big deal I thought, so I changed it to external, and did a reboot. After reboot, the check box is unchecked, but looking at the app manager, it still shows the internal flash first. Thankfully, I did a backup first, so I am restoring now. Is this a know issue? Sorry if it has been asked before but I did not see it in the thread. Thanks again for your work......
Click to expand...
Click to collapse
This is why swiching mounts is not great. The kernel flash replaces the boot.img.
Your best bet might be to wait till the next CM9 nightly comes out and modify that one.
Nightly build
CM9 downloads seem to go to internal storage but CWM was directed to perform update from external sd (ie microsd card). Unless I'm missing something, it doesn't look like the location can be changed manually.
Can someone please explain what the BLN bug is? I understand that the led back lights do not function 100% correctly, but in what ways do they malfunction?
creeve4 said:
Can someone please explain what the BLN bug is? I understand that the led back lights do not function 100% correctly, but in what ways do they malfunction?
Click to expand...
Click to collapse
I've been wondering the same thing, from what I experienced so far it seems that the button lights won't come on after screen lock/timeout. The actual BLN notifications seem fine to me, probably worth mentioning the actual notification light option needs to be enabled otherwise BLN won't work.
Does anyone have issues with mobile data connection dying with CM9? For whatever reason mine randomly quits working almost daily and the only way to recover is a reboot, turning data on/off or airplane mode doesn't fix it... Inconvenient to say the least, WiFi still works fine... Oh and BTW I didn't had this issue with the debloated/deodexed stock GB or ICS.
Which cm9 version are you using?
Sent from my SAMSUNG-SGH-T769 using xda premium
lnxzilla said:
I've been wondering the same thing, from what I experienced so far it seems that the button lights won't come on after screen lock/timeout. The actual BLN notifications seem fine to me, probably worth mentioning the actual notification light option needs to be enabled otherwise BLN won't work.
Does anyone have issues with mobile data connection dying with CM9? For whatever reason mine randomly quits working almost daily and the only way to recover is a reboot, turning data on/off or airplane mode doesn't fix it... Inconvenient to say the least, WiFi still works fine... Oh and BTW I didn't had this issue with the debloated/deodexed stock GB or ICS.
Click to expand...
Click to collapse
I've found that CLEAN flashes eliminate this for me on all ROMS. I think multiple dirty flashes like flashing updates over previous versions will eventually mess things up expecially when changes r made to the kernel
-I'm not a Dev, I just flash alot-
-If I've helped you the Thanks button is only 2 clicks away!
@woodzx67: Currently latest official cm9 20121125
@johnb380: Started fresh with a full wipe a few times already, makes no difference in this case as the data connection issue has always been there for me with cm9 in particular. I've only used cm10 briefly, don't recall that happening but then again the SOD issue prevented it from running for too long.
Related
RoyalLiquid - This is a Q&D port of our RoyalLiquid rom for the Mytouch4G.
Warning! We Are Not Responsible For Anything That Happens To Your Device. I don't own an Inspire, so I haven't been able to test/troubleshoot.
The Team That Brings You all Royal Roms:
Release Name: RoyalLiquid
Release Version: Pre-Alpha
Base Firmware: 2.2.1
Kernel Version: Stock Kernel
Recovery Required: 3.0.0.6
Wipe Required: Full wipe each flash (unless otherwise stated).This is how you should wipe:
Main Recovery Menu:
1. Wipe data / factory reset
2. wipe cache partition
Advanced Recovery Menu:
3. Wipe Dalvik Cache
Mounts and Storage Recovery Menu:
4. Format Boot
5. Format System
6 Format SDcard (optional but sometimes fixes issues - Be warned you will loose everything on your SDcard. Pictures,music, videos everything)
Special instructions: Give 2 minutes+ to boot on first boot please.
This should be common knowledge by now but if you want to complain about an issue make sure you have a log cat also you should be running a log cat on every first boot. If you dont have ADB set up on your computer follow this very easy guide to set it up. It truly only takes a few minutes.
Sceen shot below are how this rom looks on the Mytouch4G. YMMV.
What Works:
* It boots.
What Doesn't:
*Probably a lot - Devs only. Someone should pick this up and try and fix the issues as I don't have the device and wont be able to.
Roms:
http://www.multiupload.com/0H9W65HB4J
I warn you again - This is not for the faint of heart. I just want the base out there so hopefully someone can pick it up and make it functional as a daily driver.
Downloading!!!!!!!!!!
charlieb620 said:
Downloading!!!!!!!!!!
Click to expand...
Click to collapse
Just remember. Most things probably wont work and you'll be flashing back soon after.I was asked to port this, but without having the inspire I cant test at all ro fix issues. You guys have some good devs around here, so someone should be able to pick this up and get it usable.
option94 said:
Just remember. Most things probably wont work and you'll be flashing back soon after.I was asked to port this, but without having the inspire I cant test at all ro fix issues. You guys have some good devs around here, so someone should be able to pick this up and get it usable.
Click to expand...
Click to collapse
understood.
This could get very interesting very quickly. Thank you for the port !
Anyone try this yet i am downloading as i type.
Just flashed, booted ok, data seems to work,tried to turn on wifi, turned on then bootlooped.No sound but this all needs to be worked out.I will play some more when i get home from work.
Working on a new version with mr2sweet. Hopefully more will work. Its hard, I send him a rom, he flashes, he tells me what doesn't work. Its a slow process.
option94 said:
Working on a new version with mr2sweet. Hopefully more will work. Its hard, I send him a rom, he flashes, he tells me what doesn't work. Its a slow process.
Click to expand...
Click to collapse
Slow process or not you efforts are greatly appreciated.
option94 said:
Working on a new version with mr2sweet. Hopefully more will work. Its hard, I send him a rom, he flashes, he tells me what doesn't work. Its a slow process.
Click to expand...
Click to collapse
If you want I can test stuff out as well, I'm pretty good at finding oddball things.
ill wait till progress comes along. i hate bootloops :-(
Progress!!!
I've been working on the rom today. I've made a lot of progress. I got the status bar showing and the acer lockscreen working. I got wifi to the point that it gets suck on obtaining ip adress and then loops back to scanning etc. If someone can fix the wifi so it will finish obtaining an adress and connect that will be fixed. Also if someone can fix sound. There is no sound from the earpiece or the external speaker. I am going to continue to work on it and probably post and updated rom tonight. If anyone has any ideas to fix these issues it would help a lot.
Thanks so much option94. Love the liquid metal on my incredible. Hope we can get some interest in this for the inspire.
newter55 said:
Thanks so much option94. Love the liquid metal on my incredible. Hope we can get some interest in this for the inspire.
Click to expand...
Click to collapse
Well, if you still plan on what we discussed it should be pretty easy to get this going.
This and the rest of TeamRoyals roms.
option94 said:
This and the rest of TeamRoyals roms.
Click to expand...
Click to collapse
That would be awesome.
CM7 Inspire 4G
TheBassman369 said:
That would be awesome.
CM7 Inspire 4G
Click to expand...
Click to collapse
Yeah, dev section over here looks pretty boring. Need to liven things up a little.
Last night I flashed the ROM and this morning I found some issues that I'm sure you're aware of but I will point them out just in case.
Doesn't Work:
Home Button and Return Button
WiFi
Otherwise Didn't notice anything major, it seems the Menu button acts like the Home button. I will be glad to continue testing when there is an update.
Here is an UPDATED rom!
here is a link to an updated rom. Almost everything works and works well. The only thing that doesn't work is there is no sound from the speaker or the earpiece. If a dev could please fix this issue it could be used as a daily rom. Someone please help fix sound.
http://www.mediafire.com/?1tfgufsd7mga3la
mr2sweet said:
here is a link to an updated rom. Almost everything works and works well. The only thing that doesn't work is there is no sound from the speaker or the earpiece. If a dev could please fix this issue it could be used as a daily rom. Someone please help fix sound.
http://www.mediafire.com/?1tfgufsd7mga3la
Click to expand...
Click to collapse
If I knew more, I would help, but I'm glad to see that such progress has been made.
CM7 Inspire 4G
Just wanted to start off and say a BIG THANKS for LinuxBozo and his amazing infuse mod which lets us use the other samsung roms (JVQ restricted )
I have been experimenting ALOT with various roms and thought i would share some of which i have tested out so far, the only one which gave me some issues was Sensation 2.0 , seems like when you reboot, sometimes you get no netwrok, then reboot, and icons are missing, so its a question.
Obviously this isnt really an OFFICAL rom for the Infuse, but id like to know if anyone else has had nice experience or recommendations for use with this dude's rom.
Galaxy S I9000 ROMS
[ROM][07/07/2011] - Ryyu's EDB v1.3 [JVQ] -- New Improvements!
http://forum.xda-developers.com/showthread.php?t=1133395
[ROM] SpeedRom [JVQ][Fast & Stable] NEW NEW
http://forum.xda-developers.com/showthread.php?t=1189625
[ROM][19/7] GingerReal - V7.1.4 JVQ - Time to Downgrade - stability and speed
http://forum.xda-developers.com/showthread.php?t=1155623
[ROM] [22.07.2011] DarkyROM v10.2 ★ JVQ ★ What are you waiting for?
http://forum.xda-developers.com/showthread.php?t=814091
[ROM][02/08/2011] Tiramisu EVO 6.0/6.7 Summer Edition! JVP/JVQ BIG UPDATE OUT!
http://forum.xda-developers.com/showthread.php?t=1171476
Captivate Roms
[ROM][2.3.4][JVQ]Continuum v6.1 - v6.2 Beta Now Open!
http://forum.xda-developers.com/showthread.php?t=1136128
[ROM][2.3.4][JVQ][UPDATE: 7/31] DlevROM Version 4.2: Mods and Features Galore!
http://forum.xda-developers.com/showthread.php?t=1146176
{2.3.4 ROM} Mosaic VI {Team Phoenix}{7/30/2011}
http://forum.xda-developers.com/showthread.php?t=1061203
VIBRANT ROMS
[ROM] RevolutionRom JVQ Final Update 2 (2.3.4) 7.31.11 Definitely Fixed Bluetooth
http://forum.xda-developers.com/showthread.php?t=1192438
So this hack seems to be another way to get Gingerbread on your phone. Interesting.
I have been running Darky all day with no problems. Very fast and stable.
Sent from my GT-I9000 using XDA App
Just wanted to throw it out there I ran a JVP based ROM without issue for an hour or so. The only thing I had to do was add my APN settings back & all was well. Someone may need to test this a bit more but my experience went well.
Does the darky rom support HSPA+?
Sent from my SAMSUNG-SGH-I997 using XDA Premium App
Auto-Android said:
Does the darky rom support HSPA+?
Sent from my SAMSUNG-SGH-I997 using XDA Premium App
Click to expand...
Click to collapse
Hellraiser uses the same Rogers RIL that Infused v2 does, so probably not. (RIL is one of the things that gets swapped out.)
It's often hard to tell for sure because many frameworks won't show HSPA+ even if the RIL/modem are operating in that mode. Hell, even our original Froyo ROMs were broken in that way - they displayed UMTS when in HSPA+ mode. (UMTS is plain vanilla 3G.)
GingerReal - V7.1.4 JVQ
Been running GingerReal V7.1.4 JVQ with Infusion GB kernel and I must say it's snappy. I have not had a single problem with anything. And from what I read Quadrant scores don't mean much, but I got a 3500 OC at 1.6. without Stagefright. I did'nt know Stagefright was til I Googled it. But my phone is very fast and I am very happy. Thanks Linux
Infiniti350GT said:
Just wanted to throw it out there I ran a JVP based ROM without issue for an hour or so. The only thing I had to do was add my APN settings back & all was well. Someone may need to test this a bit more but my experience went well.
Click to expand...
Click to collapse
Which ROM did you test for JVP , i might give it a whirl, i finally finished going through all those roms, The Vibrant rom wasnt very exciting, and seemed to lack the extended power menu drop down which has Reboot, recovery download mode and such, thats a big thing for me.
Darky was my favorite so far,I might try Sensation. If anyone wants to test out a couple JVP roms and try adding in the APN settings, lets see what comes up and post which rom you tested.
Thanks everyone for their input on this, im getting more interested now and i will be trying to use the Infusion Kernel with some of these roms and see if i get a performance boost.
Im not sure if its just me, but whenever i reboot ANY of those roms which are installed with Linux's software , it seems sometimes the icons on the app drawer l ike disappearing, then when i reboot, apps reappear, but the Network to ATT gets cut off, then i reboot again, and sometimes its normal..........Any ideas?
prasadudwadia said:
Which ROM did you test for JVP , i might give it a whirl, i finally finished going through all those roms, The Vibrant rom wasnt very exciting, and seemed to lack the extended power menu drop down which has Reboot, recovery download mode and such, thats a big thing for me.
Darky was my favorite so far,I might try Sensation. If anyone wants to test out a couple JVP roms and try adding in the APN settings, lets see what comes up and post which rom you tested.
Thanks everyone for their input on this, im getting more interested now and i will be trying to use the Infusion Kernel with some of these roms and see if i get a performance boost.
Im not sure if its just me, but whenever i reboot ANY of those roms which are installed with Linux's software , it seems sometimes the icons on the app drawer l ike disappearing, then when i reboot, apps reappear, but the Network to ATT gets cut off, then i reboot again, and sometimes its normal..........Any ideas?
Click to expand...
Click to collapse
BTW, the default behavior in Sensation is no extended power menu, but if you use the app "Theme Settings (included in the ROM) you can change this.
As to the other issues - that's a new one, I haven't seen it before.
prasadudwadia said:
Which ROM did you test for JVP , i might give it a whirl, i finally finished going through all those roms, The Vibrant rom wasnt very exciting, and seemed to lack the extended power menu drop down which has Reboot, recovery download mode and such, thats a big thing for me.
Darky was my favorite so far,I might try Sensation. If anyone wants to test out a couple JVP roms and try adding in the APN settings, lets see what comes up and post which rom you tested.
Thanks everyone for their input on this, im getting more interested now and i will be trying to use the Infusion Kernel with some of these roms and see if i get a performance boost.
Im not sure if its just me, but whenever i reboot ANY of those roms which are installed with Linux's software , it seems sometimes the icons on the app drawer l ike disappearing, then when i reboot, apps reappear, but the Network to ATT gets cut off, then i reboot again, and sometimes its normal..........Any ideas?
Click to expand...
Click to collapse
I ran Hawkish 4 http://forum.xda-developers.com/showthread.php?t=1032599
I chose it because I saw that the ROM included the background effect from the SGSII, which while I have the SGSII & this feature seems to throw my photos to the way over saturated side - its more appealing for home screen settings and every day use since everything just looked almost wet or gooey. But the setting didn't work I imagine a kernel conflict, but I'm sure this could be built into one of our ROMS later and I wouldn't mind helping out with putting it together.
Overall I thought this ROM was a little laggy for the phone, I'm sure there are others out there that could run MUCH better or smoother.
I find it funny that we get a stock phone and find it boring so we flash a brand new phone to something completely different within an hour and when the next phone comes out we want their stock stuff so we can see how it is on OUR phone...HAHAHA -addicted
Infiniti350GT said:
I ran Hawkish 4 http://forum.xda-developers.com/showthread.php?t=1032599
I chose it because I saw that the ROM included the background effect from the SGSII, which while I have the SGSII & this feature seems to throw my photos to the way over saturated side - its more appealing for home screen settings and every day use since everything just looked almost wet or gooey. But the setting didn't work I imagine a kernel conflict, but I'm sure this could be built into one of our ROMS later and I wouldn't mind helping out with putting it together.
Overall I thought this ROM was a little laggy for the phone, I'm sure there are others out there that could run MUCH better or smoother.
I find it funny that we get a stock phone and find it boring so we flash a brand new phone to something completely different within an hour and when the next phone comes out we want their stock stuff so we can see how it is on OUR phone...HAHAHA -addicted
Click to expand...
Click to collapse
I think those are controls for Voodoo Color which:
1) Is extremely difficult to implement on our device (significantly different screen)
2) Is not necessary on our device - our screen fixes most if not all of the problems VC was intended to fix.
Entropy512 said:
I think those are controls for Voodoo Color which:
1) Is extremely difficult to implement on our device (significantly different screen)
2) Is not necessary on our device - our screen fixes most if not all of the problems VC was intended to fix.
Click to expand...
Click to collapse
Yes sir, I believe you are exactly right. I normally don't like over saturation, but on a HUGE screen it looked great with some gooey gingerbread green stuff around it. My photography looked horrible especially HDR shots, worth it though. The colors on the SGSII and this phone are pretty different tho. But a lot to do with the same resolution on a smaller screen. The screen on the Infuse is a big (no pun) factor that held me to it rather than the SGSII
bigfau said:
Been running GingerReal V7.1.4 JVQ with Infusion GB kernel and I must say it's snappy. I have not had a single problem with anything. And from what I read Quadrant scores don't mean much, but I got a 3500 OC at 1.6. without Stagefright. I did'nt know Stagefright was til I Googled it. But my phone is very fast and I am very happy. Thanks Linux
Click to expand...
Click to collapse
i as well got the same results, but did you have a problem with the modem. mine would work for about 3 min and then i would no longer have network connection.
i had to change the modem to get it work really smooth, but yes this set is pretty good.
Infiniti350GT said:
Just wanted to throw it out there I ran a JVP based ROM without issue for an hour or so. The only thing I had to do was add my APN settings back & all was well. Someone may need to test this a bit more but my experience went well.
Click to expand...
Click to collapse
Man! I'm so upset. I flashed this ROM twice, but it would not boot. Did you flash from stock? I don't know what I did wrong.
tekgurl said:
Man! I'm so upset. I flashed this ROM twice, but it would not boot. Did you flash from stock? I don't know what I did wrong.
Click to expand...
Click to collapse
Okay heres me scenario, hope it helps understand.
1) started off with phone already rooted and such and previously had Infused V2.00 full., Downloaded a JVQ rom ( like Darky's ) , and then downloaded Linux Bozo's rom/mod ) Put both of the zips on the ROOT of the internal SD .
2) backup info and boot into Red recovery.( Shut off device, then hold Vol - and + while pressing power ), release power and continue holding both volume keys).
3) Perform the following
Wipe Data/Factory Reset, Wipe Cache partition, Wipe Dalvik Cache
Install zip from SD card and select the ROM you want to use
Do install from SD card again and this time select the Linux Bozo zip
4) Reboot and you will be in your rom after 10 minutes ( be patient, it takes time ). If you want better performance, install the Infuse GB Kernel. Get it here
http://forum.xda-developers.com/showthread.php?t=1212485
5) Enjoy the rom
prasadudwadia said:
Okay heres me scenario, hope it helps understand.
1) started off with phone already rooted and such and previously had Infused V2.00 full., Downloaded a JVQ rom ( like Darky's ) , and then downloaded Linux Bozo's rom/mod ) Put both of the zips on the ROOT of the internal SD .
2) backup info and boot into Red recovery.( Shut off device, then hold Vol - and + while pressing power ), release power and continue holding both volume keys).
3) Perform the following
Wipe Data/Factory Reset, Wipe Cache partition, Wipe Dalvik Cache
Install zip from SD card and select the ROM you want to use
Do install from SD card again and this time select the Linux Bozo zip
4) Reboot and you will be in your rom after 10 minutes ( be patient, it takes time ). If you want better performance, install the Infuse GB Kernel. Get it here
http://forum.xda-developers.com/showthread.php?t=1212485
5) Enjoy the rom
Click to expand...
Click to collapse
I've successfully flashed a JVQ Rom. I'm trying to figure out how Infiniti350 was able to flash a JVP Rom.
tekgurl said:
I've successfully flashed a JVQ Rom. I'm trying to figure out how Infiniti350 was able to flash a JVP Rom.
Click to expand...
Click to collapse
I just followed the exact instructions the OP posted up above. With 1 mishap, when I downloaded what I thought was the ROM....I only got the lock-screen (what happens when you read things way too fast & think you know what you did) which I already downloaded and flashed
I mounted the SD card while in recovery and pushed the file containing the ROM over to the phone - flashed it - flashed LinuzBozo's stuff - rebooted & things went well all I had to do was add APN's back.
I really like my current set up BUT I'll probably find something else, before I load the ROM I want I'll run this again with a JVP base and see how things go & defiantly let you guys know. Now I'm curious why it doesn't work for other people.
Infiniti350GT said:
I just followed the exact instructions the OP posted up above. With 1 mishap, when I downloaded what I thought was the ROM....I only got the lock-screen (what happens when you read things way too fast & think you know what you did) which I already downloaded and flashed
I mounted the SD card while in recovery and pushed the file containing the ROM over to the phone - flashed it - flashed LinuzBozo's stuff - rebooted & things went well all I had to do was add APN's back.
I really like my current set up BUT I'll probably find something else, before I load the ROM I want I'll run this again with a JVP base and see how things go & defiantly let you guys know. Now I'm curious why it doesn't work for other people.
Click to expand...
Click to collapse
I think sometimes people either have a bad flash or don't properly wipe data. Same reason lots of people randomly had problems with Infused. (I haven't tried JVP myself though.)
Well, i just finished wrapping up my favorite roms, and i keep jumping between the Sensation rom, and Darky's Rom .
BUT!
I always data wipe, clear cache, factory reset
Idk if this helps, but i saw theres a new Linuz BETA 6 , perhaps this might help problems that a few have been going through.
In closing, i really hope more ROMS designed for the Infuse come fast , i got a feeling with this new mod there will be many to come
Entropy512 said:
I think sometimes people either have a bad flash or don't properly wipe data. Same reason lots of people randomly had problems with Infused. (I haven't tried JVP myself though.)
Click to expand...
Click to collapse
This is a very good point. The data wipe is vital for the Infuse no matter what. I have tried it with and without the wipe & all sorts of very strange things go wrong at random. Market apps wont download - Errors when using data - Youtube errors - issues with email. Each time I did it different ones would act up too, never the same.
Full Wipe so far has fixed it without failure
*Edit - Full for me same as prasadudwadia said above - data, cache, and factory reset.
hi guys, one month ago i had a custom rom on my i9003 but the notification bar bug annoying me, it became black and doesn't show nothing some times...is there a fix for it or not? thanks
I never had this issue on any cm9 rom, do a clean install and wipes (data / dalvik) after and before flashing cm9 .zip
Notification pull down going blank at times is a known cm9 bug since alpha 9 or 10.
Sent from my GT-I9003
I don't experience it too frapeti.
Must be because of lag or something.
I used to get it a lot on earlier CM9 alpha builds. It happened on recent builds as well, but very rare.
I'd stay it still is a bug, a minor one.
well, i'm not the one that find that bug. I've flashed always with full wipe, maybe it needs another base?
I had the same issue, often on the latest cm9a11
Nemed said:
I had the same issue, often on the latest cm9a11
Click to expand...
Click to collapse
maybe it comes with not fully hw composer?
coolpix90 said:
maybe it comes with not fully hw composer?
Click to expand...
Click to collapse
I don't really know...
its becouse you push your phone too much when its loading and you are causing the bug, of course its not your fault, maybe it has to be fixed upstream (cyanogenmod repo) but most of newest phones comes with min 1ghz, next time try flashing and booting well, give the phone at least 5 mins to boot up, and do what it have to do, then use your phone as normally.
frapeti said:
its becouse you push your phone too much when its loading and you are causing the bug, of course its not your fault, maybe it has to be fixed upstream (cyanogenmod repo) but most of newest phones comes with min 1ghz, next time try flashing and booting well, give the phone at least 5 mins to boot up, and do what it have to do, then use your phone as normally.
Click to expand...
Click to collapse
this is not my bug... i've installed with full wipe ( before and after ) as always, and i don't push my phone when loading, it shows occasionally when drop down the notification bar
coolpix90 said:
this is not my bug... i've installed with full wipe ( before and after ) as always, and i don't push my phone when loading, it shows occasionally when drop down the notification bar
Click to expand...
Click to collapse
"This is not my bug". Alright we know.
In my point of view, it happens when you are doing many things at the same time, or the phone is laggy at that point of time.
And that causes some delay.
As i said it's the only way i can explain since it doesn't happen to me anymore.. you'll have to wait for someone to give a technical explanation.
frapeti said:
its becouse you push your phone too much when its loading and you are causing the bug, of course its not your fault, maybe it has to be fixed upstream (cyanogenmod repo) but most of newest phones comes with min 1ghz, next time try flashing and booting well, give the phone at least 5 mins to boot up, and do what it have to do, then use your phone as normally.
Click to expand...
Click to collapse
honestly it happens randomly, not after boot ...and i flashed on a clean kpu...
The Problem/Symptoms: I've been running a version of last CM10.2 for the past year. On February 20th, I was able to send a single SMS and then subsequent texts failed. I could still receive SMS, send/receive MMS, send/receive calls and send/receive data. If I toggle airplane mode/reboot I can send another SMS and then subsequent sms are undeliverable.
What wont work: Flashing to CM11 does not change the issue.
Disabling Voice+ does not change the issue
Factory Reset does not change the issue
Workarounds: Toggle Airplane mode
Switching Mobile Network to CDMA only (not permanent)
Change your number to a different area code
Going back to a Touchwiz based ROM
The Solution
net-cat said:
Alright. I think I've refined my process and it results in having a newer radio as well as not having to ODIN things or do dd commands.
NOTE: This isn't fully tested. When I did this, my phone wasn't showing the issue. I did this after doing my original procedure, but the GPS stopped working after I updated the radio from VRALF2 to VRBMB1. You shouldn't need to do the original procedure for this to work, but I haven't tested that. At the very least, the original procedure still works and this one can be used afterward if you need the newer radio. (GSM support...)
Ideally, we'll want to get to a procedure that doesn't use ODIN or dd. Hopefully this is a step in that direction.
Requirements:
A rooted stock ROM of the VRUCML1/4.3 vintage. I used Scott's Stock Rooted Knox Free VRUCML1 - 4.3 - DeOdex - V2. (Thread here.)
VRBMB1 AIO Flash, available here. (Thread here.)
I'm going to assume you know how to boot into and use recovery.
NOTE: Do NOT let the stock ROM install any updates.
Starting with my CM11 M3 install, I did a nandroid backup. (Recovery is CWM Touch 6.0.4.5, but I doubt that matters.)
Flash the VRBMB1 AIO.
Wipe data and cache.
Flash the stock ROM.
Boot into the stock ROM.
The reprovisioning seems to happen as a part of ROM's initial boot up.
Send a few text messages to test. (I sent them to Twitter.)
Launch the Maps application, turn on your GPS and let it get a lock. If you don't, when you boot back into your ROM, you probably won't have working GPS.
This would be a good time to back up your IMEI if you haven't already done so.
Reboot into your recovery, wipe data/cache and restore your nandroid backup.
At this point, you'll be running your preferred ROM with a less archaic radio than my previous post.
DO NOT UPGRADE YOUR RADIO. The moment I upgraded my radio, the problem came back!
CM11 M3 will work just fine with the old radio. I've rebooted several times over the last few hours and it still works fine. (Time will tell if it's a long term fix or not.)
Click to expand...
Click to collapse
buffal0b1ll said:
I put a MB1 aoi zip in my dropbox for you. It's from invisblek.org which isn't working now for some reason https://www.dropbox.com/s/7b1aqspo40fxl00/VRBMB1.aio.zip
Click to expand...
Click to collapse
Notes: There are threads for the S4 with this identical problem. All updated information I have seen is listed above. If anyone knows more please post as I am going to keep this updated. If this does/doesn't work for you please post and let the community know. Feel free to hit the thanks button if it works for you.
This exact thing happened to me. I tried many fixes with no luck. After hours of hacking around in settings, I found a ROM of verizon's 4.3 OTA update and flashed that through ODIN. My texts are working just fine again. Kind of a cheap method of fixing my problem. I wish I could have taken more time to find a fix, but I needed to be able to communicate with people that day.
Stock 4.3 is kind of lame:
-4.3 is killing my battery faster than ever. CM11 had me going for days without charging and now I've needed to charge everyday.
-Stock 4.3 is laggier/slower than CM11. It tends to stutter for me.
-4.3 came with a new boot loader which no developers have exploited to install custom ROMs yet. This leaves you stuck with Verizon bloat. I hate all these damn apps. Going to try to safe root & see if I can't do some cleanup work.
Enough ranting. Just wanted to let you know you are not alone with this problem. Hopefully someone will figure it out. Missing my cyanogen mod already
It seems this problem has happened on other phones also running Cyanogenmod. I found this thread http://forum.xda-developers.com/showthread.php?t=2654822
It looks like the symptoms have all showed up at the same time approximately. (February 19th, 2014). Still looking for a better answer than going back to stock TW...
Edit: And another thread http://forum.xda-developers.com/showthread.php?t=2659280 This one suggests its all AOSP roms. But it seems many people are unaffected... I don't understand why/how.
edit2: and another thread http://forum.xda-developers.com/showthread.php?p=50627899
Just looking for more info
Sent from my SCH-I535 using Tapatalk
Dex954 said:
Just looking for more info
Sent from my SCH-I535 using Tapatalk
Click to expand...
Click to collapse
SO this is the current status that I know.
The problem happens for everyone with a 570/717 area codes + on verizon + running Cyanogenmod (possibly any AOSP) + while connected to LTE which started on Feb 20th (the day before KitKat came out offically).
Current Workarounds:
Switch to TouchWiz based Roms
Switch your radios to be CDMA only
Call verizon and switch your number to a different area code
I know the workarounds all suck but that all I know for now. Switching SIM cards won't work. If I anyone knows anything more please feel free to let me know.
I'm 717
Sent from my SCH-I535 using Tapatalk
I have still be unable to find a solution for this issue. I think I have to give up on CM and go back to a TW based. If I hear anything new I'll update the post but I don't have the time to be wasting on my phone at the moment. If someone finds or hears of a fix or if it magically goes away as it started, please post it.
And spread the word if there are any other ROMs that this is occurring on. It seems the pool of those affected is just too small.
I have already had to give up. Been running slows tw. I take it Verizon didn't get back to you?
Sent from my SCH-I535 using Tapatalk
Here is my thread guys. Same issue. I am gonna get on the fog horn with some Verizon buddies I have http://forum.xda-developers.com/showthread.php?t=2662658
DreamFX said:
Here is my thread guys. Same issue. I am gonna get on the fog horn with some Verizon buddies I have http://forum.xda-developers.com/showthread.php?t=2662658
Click to expand...
Click to collapse
Godspeed my friend.
Anyone try aosp to see if fixed yet?
Nope. Still having issues. Tried gummy and cm. TW based roms are fine. In 717.
capt730 said:
Nope. Still having issues. Tried gummy and cm. TW based roms are fine. In 717.
Click to expand...
Click to collapse
I try every other day. 717 for me. Remaining hopeful it's fixed... One day...
What gapps are you using? I have been using the PA 0Day gapps. Going to try the gapps package from invisblek and see if that makes a difference.
Sent from my GT-N5110 using XDA Premium 4 mobile app
capt730 said:
What gapps are you using? I have been using the PA 0Day gapps. Going to try the gapps package from invisblek and see if that makes a difference.
Sent from my GT-N5110 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
It won't. It isn't software dependent. People who had already flashed builds prior to the 20th magically had issues starting on that date, so it isn't a problem with new builds, and it only happens to those in the 717-570 areas so it isn't a problem with AOSP code. It has to be a Verizon network issue, I just have no idea how.
Sent from my SCH-I535 using XDA Premium 4 mobile app
I have run TW base roms almost 100% of the time. Prior to the 20th, I had flashed cm11 3 or 4 times to see if camera worked and was never on it more than a day. I also had issues where music in my sd card wasn't being found but it was fine on TW. Could it be the unified build causing an issue? I have no issues on Clean Rom 8, wicked sensations or old and slows stock based roms.
*Edit* I have installed Gummy and CM 11 with PA Mini Modular apps and the CM Gapps from Invisiblek, let it set up. I then shut it down, removed battery and sim and then put everything back in and still the same issue. 1st text message goes through, then the rest after that just fail. I tried regular message app, Hangouts and Verizon messaging. All same results. I go back to my CR8 backup and all is fine. It's bizarre because everything else seems to be working fine and is very fast & smooth.
capt730 said:
I have run TW base roms almost 100% of the time. Prior to the 20th, I had flashed cm11 3 or 4 times to see if camera worked and was never on it more than a day. I also had issues where music in my sd card wasn't being found but it was fine on TW. Could it be the unified build causing an issue? I have no issues on Clean Rom 8, wicked sensations or old and slows stock based roms.
*Edit* I have installed Gummy and CM 11 with PA Mini Modular apps and the CM Gapps from Invisiblek, let it set up. I then shut it down, removed battery and sim and then put everything back in and still the same issue. 1st text message goes through, then the rest after that just fail. I tried regular message app, Hangouts and Verizon messaging. All same results. I go back to my CR8 backup and all is fine. It's bizarre because everything else seems to be working fine and is very fast & smooth.
Click to expand...
Click to collapse
It can't be an issue with the unified builds because going back and flashing an older build yields the same results. If you're willing to make the trade-off, you can set your phone to CDMA only. Texts will send, but you'll have no 3G or 4G.
I'm ok with using CR8, Beans or other stock roms. Can't see paying for LTE and not using it lol. Was curious to see how aosp has been coming along and sms was really the only issue I was having.
Obaterista93 said:
It can't be an issue with the unified builds because going back and flashing an older build yields the same results. If you're willing to make the trade-off, you can set your phone to CDMA only. Texts will send, but you'll have no 3G or 4G.
Click to expand...
Click to collapse
I was using masta's 10.2 build for over 6 months without even thinking about flashing new builds. The 20th is when the problem started for me. Upgrading to CM11 didn't change it. I just installed Hyperdrive and everything is back to normal.
I wish I could go back to CM but it just doesn't work in this area. And I don't know what I can do about it,
Whisk_33 said:
I was using masta's 10.2 build for over 6 months without even thinking about flashing new builds. The 20th is when the problem started for me. Upgrading to CM11 didn't change it. I just installed Hyperdrive and everything is back to normal.
I wish I could go back to CM but it just doesn't work in this area. And I don't know what I can do about it,
Click to expand...
Click to collapse
Basically. I've talked to a few friends who have worked for carriers and stuff, and everyone is stumped as to how something like this can even happen. Luckily I'm pretty much always in WiFi so I can survive on CDMA only.
So after doing a wipe to my phone (was becoming slow) my phone randomly restarts itself for no reason as if it just crashes. I am running the latest version of the beanstalk rom. http://forum.xda-developers.com/showthread.php?t=2091900 I don't have the greatest understanding of flashing, roms, blah blah blah, but managed to get kit kat working for the last year or so, I don't understand why this is happening now, did I choose a bad rom or something? Everything else on the phone works but obviously constant restarts get to be very annoying.
Any help would be appreciated,
thank you!
Infused4life said:
So after doing a wipe to my phone (was becoming slow) my phone randomly restarts itself for no reason as if it just crashes. I am running the latest version of the beanstalk rom. http://forum.xda-developers.com/showthread.php?t=2091900 I don't have the greatest understanding of flashing, roms, blah blah blah, but managed to get kit kat working for the last year or so, I don't understand why this is happening now, did I choose a bad rom or something? Everything else on the phone works but obviously constant restarts get to be very annoying.
Any help would be appreciated,
thank you!
Click to expand...
Click to collapse
Try leaving it turned on in recovery mode (CWM). If it still reboots, then you have a hardware issue. If it stays stable, I would blame the ROM and try a different version or a different distro.
Sent from my MyTouch 4G Slide
joel.maxuel said:
Try leaving it turned on in recovery mode (CWM). If it still reboots, then you have a hardware issue. If it stays stable, I would blame the ROM and try a different version or a different distro.
Sent from my MyTouch 4G Slide
Click to expand...
Click to collapse
Thanks for the reply,
I don't think it is a hardware issue as it never did this when I had Jelly Bean or even the last time I had Kit Kat, never know though! Also, I will try to leave it in recovery and see if it does it but a few questions:
-What is "distro" (does it has to do with the OS of the phone?)
-Is there some ROM you could recommend to me for this phone that is stable.. When I install the beanstalk ROM there are like 10 to choose from, I'm guessing they are all older/newer versions!?
-Finally something I was wondering for the longest time but wasn't sure of is can I go back to say, Jelly Bean? Or is it "irreversible"?
Thanks again, glad there's people out there who can help the noobs like me!
Infused4life said:
Thanks for the reply,
I don't think it is a hardware issue as it never did this when I had Jelly Bean or even the last time I had Kit Kat, never know though! Also, I will try to leave it in recovery and see if it does it but a few questions:
-What is "distro" (does it has to do with the OS of the phone?)
-Is there some ROM you could recommend to me for this phone that is stable.. When I install the beanstalk ROM there are like 10 to choose from, I'm guessing they are all older/newer versions!?
-Finally something I was wondering for the longest time but wasn't sure of is can I go back to say, Jelly Bean? Or is it "irreversible"?
Thanks again, glad there's people out there who can help the noobs like me!
Click to expand...
Click to collapse
Methinks it is the specific ROM. I call the different types of OM out there distributions (or "distros" - in light of what is commonly used in the Linux world), but there may be a better term. It could be the version of Beanstalk you are using, it could be any version of BeanStalk with your phone. Hard to say.
In light of above, I would try CarbonROM. I tried it out briefly, and haven;t had a problem with it (and have heard no issues form the guy I sold the phone to with it installed).
But if you want to go back to JellyBean, there is still a version of 4.2 kicking around (CM 10.1) in the development threads. You can downgrade, at worst you may have to ODIN back to stock. But try to flash in CWM first. I was quite satisfied with that version. My biggest gripe is that the mobile data quick setting didn't work fully (but the long way around did). There is CM 10.2 as well, but I could never get that one installed on my phone (installer would break). Between the two, I would try 10.1 (and if you cannot find a copy, I can dropbox it to you).
5529
joel.maxuel said:
Methinks it is the specific ROM. I call the different types of OM out there distributions (or "distros" - in light of what is commonly used in the Linux world), but there may be a better term. It could be the version of Beanstalk you are using, it could be any version of BeanStalk with your phone. Hard to say.
In light of above, I would try CarbonROM. I tried it out briefly, and haven;t had a problem with it (and have heard no issues form the guy I sold the phone to with it installed).
But if you want to go back to JellyBean, there is still a version of 4.2 kicking around (CM 10.1) in the development threads. You can downgrade, at worst you may have to ODIN back to stock. But try to flash in CWM first. I was quite satisfied with that version. My biggest gripe is that the mobile data quick setting didn't work fully (but the long way around did). There is CM 10.2 as well, but I could never get that one installed on my phone (installer would break). Between the two, I would try 10.1 (and if you cannot find a copy, I can dropbox it to you).
Click to expand...
Click to collapse
YES!
So, after I left the phone in CWM for 25 minutes or so and it being fine I decided to get Carbon as I seen in your "signature" that you had that ROM on your Infuse, it has been good for 2 hours+, looking good! I guess it was the Beanstalk ROM after all.
Thanks for the downgrading information as well, wasn't sure if you could downgrade or what would happen!
Finally, what is flashing? (I could google it but since your here, could you give me a noob friendly definition!?)
Thanks for all your help
Infused4life said:
YES!
So, after I left the phone in CWM for 25 minutes or so and it being fine I decided to get Carbon as I seen in your "signature" that you had that ROM on your Infuse, it has been good for 2 hours+, looking good! I guess it was the Beanstalk ROM after all.
Thanks for the downgrading information as well, wasn't sure if you could downgrade or what would happen!
Finally, what is flashing? (I could google it but since your here, could you give me a noob friendly definition!?)
Thanks for all your help
Click to expand...
Click to collapse
Went to reply about the camera issue and notice it was no longer in the post. Glad you got it sorted.
So flashing, as I understand it, is just another term for installing something via recovery. Not sure of the origin, maybe have something to do with installing to flash memory.
joel.maxuel said:
Went to reply about the camera issue and notice it was no longer in the post. Glad you got it sorted.
So flashing, as I understand it, is just another term for installing something via recovery. Not sure of the origin, maybe have something to do with installing to flash memory.
Click to expand...
Click to collapse
Ah ok, so it's essentially as I thought it was. I thought I was doing something wrong in terms of "flashing" but guess not! Sounds like it should just be called "Installing custom ROM".. !
Yeah, in terms of the camera thing, I'm an idiot and had USB storage turned on *facepalm*, So it wouldn't let me open the camera app!
Infused4life said:
Ah ok, so it's essentially as I thought it was. I thought I was doing something wrong in terms of "flashing" but guess not! Sounds like it should just be called "Installing custom ROM".. !
Yeah, in terms of the camera thing, I'm an idiot and had USB storage turned on *facepalm*, So it wouldn't let me open the camera app!
Click to expand...
Click to collapse
I am not sure if you are still facing the same issue but if you are facing reboots, then considering doing a fresh install after cleaning your internal storage as well since the remnants of the apps from previous installs have caused me problems. Ever since I started doing a fresh install (Factory reset, wiping the cache, wiping the dalvik cache and even the cache partition along with the wiping of the internal storage), there have been no reboot issues.