[Q] Something new on Sammobile, could be JB for 3110? - Galaxy Tab 2 Q&A, Help & Troubleshooting

Hi all,
Does anybody know what the firmware P3110XWBLI1for Luxembourg is?
It has appeared this morning (as far as I know), 735M, regions Austria, Belgium, France, Germany, Hungary, Italy, Spain, United Kingdom.
It has no android version, so far.
Could we deduce it is JB, based on the BLI code, opposed to the BLH of ICS?

Friend pls flash that firmware and tell us if it is jelly bean.

Droidlover123 said:
Friend pls flash that firmware and tell us if it is jelly bean.
Click to expand...
Click to collapse
In sammobile, if you look at the OTA section you will see in Final PDA that P3110XWBLI1 is 4.0.4.
And maybe JB starts with LI3 (Malasia)

nfribeiro said:
In sammobile, if you look at the OTA section you will see in Final PDA that P3110XWBLI1 is 4.0.4.
And maybe JB starts with LI3 (Malasia)
Click to expand...
Click to collapse
Correct!
Didn't notice that. I have been too curious to take the time to check.
Thanks

Related

no jelly bean for european xoom wifi 3g ?

I know you can flash mz604 nightlie but what about european wifi 3g users?
There is no official CM support for Xoom 3G Europe. Not much for us as far as I know.:crying:
just flash ur 3g to wifi only if u do not use ur 3g like me. i flashed my 3g to wifi and enjoying all the support ;-)
How did you flash 3g on top of wifi rom?
Sent from my Xoom using Tapatalk 2
you can flash it...you will just loose the 3g capabilities of your zoom...that is not advisable
wait till cm team launches cm10 jellybean
If you are talking about the mz601 EU (3G/UMTS) version...
Team EOS just released their first set of nightly JB builds for this device.
Looks good so far, follow the instructions on page1, do a full wipe/factory reset and you will most likey get working 3G.
http://forum.xda-developers.com/showthread.php?t=1777987&page=1
Bux1982 said:
If you are talking about the mz601 EU (3G/UMTS) version...
Team EOS just released their first set of nightly JB builds for this device.
Looks good so far, follow the instructions on page1, do a full wipe/factory reset and you will most likey get working 3G.
http://forum.xda-developers.com/showthread.php?t=1777987&page=1
Click to expand...
Click to collapse
Has any1 tried these and can confirm everything working ok?
djpry said:
you can flash it...you will just loose the 3g capabilities of your zoom...that is not advisable
wait till cm team launches cm10 jellybean
Click to expand...
Click to collapse
You mean like lose it forever?
@ new-noob
I flashed it myself yesterday evening.
No problems with the process at all.
I´m from germany and my 3g /umts conncetion worked right out of the box.
Get build #84 and the gapps from the first post.
Place on SD Card and fire up your recovery.
Factory reset, wipe cache, wipe dalvik
Install the ROM and then gapps right after.
Boots just fine, System itself is stable for me, of course some apps crash but I guess they just need to get updated for JB.
Battery life seems to have improved a bit, nothing to worry about.
Without changing any performance settings, for me its pretty fast, I didn´t noticed any lags so far
There are some small bugs within the settings menu, but according to the early status of the rom, I bet EOS will kill them pretty soon as well as
adding all their nice little extras.
@eyriiii
No, flashing a wifi only rom just means that there a re no radio/umts driver modules included so the system doesn´t know how to use the radio module. whenever you flash a rom with those drivers again, your 3g/umts radio will work like normal. It´s just software, not killing hardware in any way.
Installed jb on my mz601 3G
3G works
Sd card works
DolphinHD has flash turned off but native browser plays youtube etc...
Rom is a bit different and switching between apps has nicer look
There is app for sms
App grouping
Some apps has moe options from menu (or whatever you call tapping the clock)
Some apps crash but uninstalling and not using widgets helped did the job on my xoom
There are some minor bugs but everything is explained here:
http://forum.xda-developers.com/showthread.php?t=1777987
In general:
Its faster
Its smoother
Feels better
Geat job from EOS DEVELOPERS ONCE AGAIN!!!
Great you made it, you won´t regret buddy
Its amazing how different is my xoom now!
Enjoy urs to!
Lke it was with the eos ICS rom, the eos JB rom kills lots of limits we had before.
This is again, pushing the fun factor while working on the xoom, to a new level.
FYI, there is a new nightly release #85 along with a new updated gapps package, just take a look at the dev thread
Bux1982 said:
Lke it was with the eos ICS rom, the eos JB rom kills lots of limits we had before.
This is again, pushing the fun factor while working on the xoom, to a new level.
FYI, there is a new nightly release #85 along with a new updated gapps package, just take a look at the dev thread
Click to expand...
Click to collapse
Yes installed already and must agree these feels like different xoom on jb cool!
Still have some issues with some apps like freenote, dolphin hd (cant zoom in/out) but in overal its great!
Most of the app crashes are due to the fact that these apps are not updated to fully support JB yet.
This is not Team EOS fault, its the app developers that are "a little late to the party"
Give them some time to get everything up-to date and it will be easy as always.
ICS for MZ601 malaysia
Does anyone know if the European 3G MZ601 roms can be flashed on a Malaysia / Asia Pac MZ601 3G xoom?
I want to try ICS on my xoom, but mine is a Malaysian model =(
eraserwke said:
Does anyone know if the European 3G MZ601 roms can be flashed on a Malaysia / Asia Pac MZ601 3G xoom?
I want to try ICS on my xoom, but mine is a Malaysian model =(
Click to expand...
Click to collapse
Think its the same device, motorola was doing us and non-us devices and mz601 is non-us, just remember to flash rom for 3G xooms...jb is out and is niceeee
new-noob said:
Think its the same device, motorola was doing us and non-us devices and mz601 is non-us, just remember to flash rom for 3G xooms...jb is out and is niceeee
Click to expand...
Click to collapse
Oh really? Cool might just try it then.
Motorola's dev site lists 2 different softwares for Europe and Other countries tho
Build H.6.1-38-1 for Retail Europe
MD5 Sum: 20b6338449a02cf271356c47d642e0db
UK, Greece, Romania, Sweden, Norway, Denmark, Netherlands, Spain, Austria, Switzerland, Poland, Hungary, Croatia, Italy, Ireland
Build H.6.1-38-9 for Retail Other International
MD5 Sum: 0e30f60feac30c752a0bf41d35f2f4d3
Thailand, Malaysia, Singapore, India, New Zealand, Indonesia, Saudi Arabia, Egypt, UAE, Jordan, Lebanon, Kuwait, South Africa, Israel
=\
eraserwke said:
Oh really? Cool might just try it then.
Motorola's dev site lists 2 different softwares for Europe and Other countries tho
Build H.6.1-38-1 for Retail Europe
HeMD5 Sum: 20b6338449a02cf271356c47d642e0db
UK, Greece, Romania, Sweden, Norway, Denmark, Netherlands, Spain, Austria, Switzerland, Poland, Hungary, Croatia, Italy, Ireland
Build H.6.1-38-9 for Retail Other International
MD5 Sum: 0e30f60feac30c752a0bf41d35f2f4d3
Thailand, Malaysia, Singapore, India, New Zealand, Indonesia, Saudi Arabia, Egypt, UAE, Jordan, Lebanon, Kuwait, South Africa, Israel
=\
Click to expand...
Click to collapse
the difference is that Non US is mostly GSM, US is CDMA two different systems........since you have 3G look for 3G non us rom in order to get gsm internet working...
http://www.xoomforums.com/forum/mot...ashing-unrooting-under-one-roof-18-print.html
Have a look on these threat, on page 18 there is guy from malasia with simmilar question like you, just read it throw....
Sorry, not trying to duplicate posts but looking for an answer for the following
I flashed my Xoom 3G EU MZ601 eith Build HWI69, I don't care about not having 3G, everything is working perfectly but I noticed when I check my serial number in settings>about>status that the serial number is not the same as the IMEI number on the box, I am not sure if they are supposed to be the same, also when trying to register my product on the Motorola website it does not recognise my MAC address. Can someone please clarify.

Where to get stock firmware for GT-P3110 (SEK)

Hello All,
I am wanna try CM9, but i need have chance to rollback to the stock rom.
But I am cannot found correct firmware for my region (SEK - Ukraine) (Checked on samsung-updates.com and sammobile.com)
Please let to know If someone know more resources where I can check ROM what i need
Anyone? I can't beleive that Samsung firmwares placed only on the two web sites...
If its not on those two sites or xda then you might be out of luck.
Ailir said:
Anyone? I can't beleive that Samsung firmwares placed only on the two web sites...
Click to expand...
Click to collapse
It doesn't matter just flash other region stock firmwares as long as it is compatible with your modern you will flash Cm9 by the way.
Sent from my GT-I9000 using xda premium
At last found right ROM for my region, on the tsar3000.com , thanks for me from me
Link to the firmware: P3110XALD4/OXEALD1
PIT file attached to the post.
Flashed this ROM today after playing with CM9 - it is really correct ROM for my region (And for the Russia, Kazakhstan and few other countries (can post full region list if it need to someone).
Ailir said:
Link to the firmware: P3110XALD4/OXEALD1
PIT file attached to the post.
Flashed this ROM today after playing with CM9 - it is really correct ROM for my region (And for the Russia, Kazakhstan and few other countries (can post full region list if it need to someone).
Click to expand...
Click to collapse
I am looking for correct Rom for P3110 Portugal (TPH). Please post full region list.
Thanks.
nfribeiro said:
I am looking for correct Rom for P3110 Portugal (TPH). Please post full region list.
Thanks.
Click to expand...
Click to collapse
It is available on the samsung-updates.com: GT-P3110_TPH_P3110XXALD4_Android_4_0_3

back to stock

wondering how to get back to stock on my Samsung galaxy tab 2 10.1 p5113. i have checked that firmware website but havent found any. and if i get back to stock can get further updates?
Use this
Trozzul said:
wondering how to get back to stock on my Samsung galaxy tab 2 10.1 p5113. i have checked that firmware website but havent found any. and if i get back to stock can get further updates?
Click to expand...
Click to collapse
Follow this
http://forum.xda-developers.com/showthread.php?t=1856532
Press thanks if I've helped
noahthedominator said:
Follow this
http://forum.xda-developers.com/showthread.php?t=1856532
Press thanks if I've helped
Click to expand...
Click to collapse
im sorta stuck on the finding the stock firmwares on the link it gave us, i am using a wifi tab not from verizon or any data plan also is this non modifed stock? can i get updates from samsungs ota?
Trozzul said:
im sorta stuck on the finding the stock firmwares on the link it gave us, i am using a wifi tab not from verizon or any data plan also is this non modifed stock? can i get updates from samsungs ota?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1704668
Thats the thread for the firmware.
noahthedominator said:
http://forum.xda-developers.com/showthread.php?t=1704668
Thats the thread for the firmware.
Click to expand...
Click to collapse
im sorry i ment i looked through that but i cant find the wifi firmware. Sorry for missleading thanks for replying
Trozzul said:
im sorry i ment i looked through that but i cant find the wifi firmware. Sorry for missleading thanks for replying
Click to expand...
Click to collapse
The first one is for wifi!!!!!!!! The first link is for the wifi gtab 2
noahthedominator said:
The first one is for wifi!!!!!!!! The first link is for the wifi gtab 2
Click to expand...
Click to collapse
P5113
P5113UECLK7 (4.1.1) - Cellular south November 2012 (Official)
PDA: P5113UECLK7
CSC: P5113XARCLK7
Date: 2012-11-30
Regions:
Download (delivered by SamMobile)
this is the first one.... isn't cellular south a service provider.....
Trozzul said:
P5113
P5113UECLK7 (4.1.1) - Cellular south November 2012 (Official)
PDA: P5113UECLK7
CSC: P5113XARCLK7
Date: 2012-11-30
Regions:
Download (delivered by SamMobile)
this is the first one.... isn't cellular south a service provider.....
Click to expand...
Click to collapse
Its basically is the United States version.:good:

JB 4.1.2 for P6210 in Hungary

Does anybody know anything about PDA:ME2 / CSC: ME1 (XEH) rom for P6210 in hungarian region?
It released in KIES couple of days ago, but I can't find it on Samfirmware.
An hungarian expert advised for me DON'T upgrade my device via KIES if I have CWM and my Tab is rooted.
He suggested to me to wait for an Odin version for this rom.
Does anybody can help?
air001 said:
Does anybody know anything about PDA:ME2 / CSC: ME1 (XEH) rom for P6210 in hungarian region?
It released in KIES couple of days ago, but I can't find it on Samfirmware.
An hungarian expert advised for me DON'T upgrade my device via KIES if I have CWM and my Tab is rooted.
He suggested to me to wait for an Odin version for this rom.
Does anybody can help?
Click to expand...
Click to collapse
There is no such ROM release in KIES. When it does arrive for Hungary, it should be XXMF1. It's possible you may be able to install the P6210XXMF1 ROM for Russia on your device via ODIN, but I am in the US so I cannot say if this will work or not. What is your current OEM ROM? There isn't a seprate path for Hungary.
I think you're wrong.
This is the firmware in KIES:
And this shows there are seperate roms for Hungary on Samfirmware:
2nd photo is about p3100 model (gt2 7.0)...
in sammobile there is not any hungary release
loolser said:
2nd photo is about p3100 model (gt2 7.0)...
in sammobile there is not any hungary release
Click to expand...
Click to collapse
What is the first item in the list?
Hungary (T-Mobile)
I see this is for P3100, but this confirms that there are firmwares for Hungary on samfirmware.
And this picture confirms too:
air001 said:
What is the first item in the list?
Hungary (T-Mobile)
I see this is for P3100, but this confirms that there are firmwares for Hungary on samfirmware.
And this picture confirms too:
Click to expand...
Click to collapse
P3100 is a completely different device from the P6210, not even using the same CPU If you could manage to load that software, your device would be bricked.
DigitalMD said:
P3100 is a completely different device from the P6210, not even using the same CPU If you could manage to load that software, your device would be bricked.
Click to expand...
Click to collapse
Yes, I know! And what?
Who said I want to flash this firmware onto my device?
I just illustrated your false statement about there is no firmware for Hungary on samfirmware with these pictures.
air001 said:
Yes, I know! And what?
Who said I want to flash this firmware onto my device?
I just illustrated your false statement about there is no firmware for Hungary on samfirmware with these pictures.
Click to expand...
Click to collapse
Can you read and do you actually understand you are writing questions in the P6200 / P6210 forum?
Who on this list cares what software is available for the Sammy P3100 or any other device other than the P6200 / P6210 that this forum is all about.
God Love you people that come here looking for help then attempt to argue with those that try.
DigitalMD said:
Can you read and do you actually understand you are writing questions in the P6200 / P6210 forum?
Who on this list cares what software is available for the Sammy P3100 or any other device other than the P6200 / P6210 that this forum is all about.
God Love you people that come here looking for help then attempt to argue with those that try.
Click to expand...
Click to collapse
Pardon?
I think you don't understand me.
Didn't you write this untrue sentences?
"There is no such ROM release in KIES."
"There isn't a seprate path for Hungary."
I've upgraded my device via KIES today morning.
And I showed you there are separate path for Hungary.
That's all.

[Q] Install Other country firmware over stock Country firmware?

So I've just got my new Galaxy SII plus today and I'm sorta a total newb when it comes to the world of flashing . I'm wondering if it's possible to flash a stock firmware from another country in this case possibly a Hong Kong (I9105PZSAMH1) firmware, over a stock firmware from a different country/region of the phones origin (in this case some European countries (Italy, France, Belgium, United Kingdom etc. with the firmware number I9105PXXAMC2).
If I were to do this, would there be any side affects (like bricking) or would the phone work fine and exactly the same as it should be?
Has anyone tried this before?
Thanks in advance
Mochi-maiju said:
So I've just got my new Galaxy SII plus today and I'm sorta a total newb when it comes to the world of flashing . I'm wondering if it's possible to flash a stock firmware from another country in this case possibly a Hong Kong (I9105PZSAMH1) firmware, over a stock firmware from a different country/region of the phones origin (in this case some European countries (Italy, France, Belgium, United Kingdom etc. with the firmware number I9105PXXAMC2).
If I were to do this, would there be any side affects (like bricking) or would the phone work fine and exactly the same as it should be?
Has anyone tried this before?
Thanks in advance
Click to expand...
Click to collapse
Yes bro I had been doing this practice for years. And no side effects at all. Go ahead and flash other country's frimware. Only csc differs.
Sent from my GT-I9105P using Tapatalk
android.zealot.fervor said:
Yes bro I had been doing this practice for years. And no side effects at all. Go ahead and flash other country's frimware. Only csc differs.
Sent from my GT-I9105P using Tapatalk
Click to expand...
Click to collapse
Ahh, ok , thanks! Really appreciated
May I ask what is csc? Sorry for my poor knowledge.
Mochi-maiju said:
Ahh, ok , thanks! Really appreciated
May I ask what is csc? Sorry for my poor knowledge.
Click to expand...
Click to collapse
The term is an abbreviated form of Consumer Software*Customization and*denotes to a specific geographical region*
And yes *hit thanks button instead of saying. : )
Sent from my GT-I9105P using Tapatalk
I just want to confirm, if I were to flash another stock from a different region, would I be flashing the radio (the baseband version) from that region as well?
Because I'm in Australia, and because I'm flashing a HK stock firmware over the European firmware.
and I'm unsure if the HK baseband version will work just as well as the current baseband version that I'm using. (Which is working very well)
Because apparently the radio towers in HK are closer together there, where as here they are further apart.
Mochi-maiju said:
I just want to confirm, if I were to flash another stock from a different region, would I be flashing the radio (the baseband version) from that region as well?
Because I'm in Australia, and because I'm flashing a HK stock firmware over the European firmware.
and I'm unsure if the HK baseband version will work just as well as the current baseband version that I'm using. (Which is working very well)
Because apparently the radio towers in HK are closer together there, where as here they are further apart.
Click to expand...
Click to collapse
Brother,no need to flash any radio,etc.....simply flash any other country's frimware and everything will be ok.
Sent from my GT-I9105P using Tapatalk

Categories

Resources