Database Info

[Q] Please Help :(

First off, this is my first post (Woopty doo horraaaay) and I desperately need help.
I have a Wifi-Only Motorola Xoom, it used to be on 3.2.1, and I had it rooted, with only using the Tiamat 2.2.2 Moray root.
I've been wanting to upgrade to ICS for a while, and I finally am. I've had to reset my xoom back to stock 4 or 5 times now, and I'm annoyed and want to do it right. Starting off, my Xoom is starting on ICS, unlocked, unrooted.
I've done many different orders of stuff. First, I flashed the clockwork recovery mod, and then I go into it, and installed the EOS-Wingray-60, but after I did that, when I start up the xoom, it never loads, it stays on the "Team EOS" boot animation. I tested it, and left it on all night, and woke up and it was still on team eos. Next, I tried installing the universal root, (It worked), and THEN I installed the Wingray-60. Same problem, stuck on animation. I've repeated these several times, and am not sure what to do.
Pretty much all I want is to be able to overclock it. What order should I do when installing roots and things?
I have wingray-60, Rogue Kernal 2.0.2 Kuma, Universal root, Clockwork recovery mod, Tiamat 3.0.5 (Not sure what this is, but when I use it, it automatically aborts the install), and I have all of the **** to restore it back to factory + my original 3.2.1 backup rooted is saved.
What order should I use the installs in, and which ones should I use? And is there something I'm doing wrong?

To have ICS with Overclock, all you need is:
- Unlocked Bootloader
- Rooted
- CWM Recovery installed (Rogue)
- TeamEOS Wingray Build 60
- TeamEOS Google Apps V10.5
All the other stuff you listed, you can move to another folder for archive. You don't need it.
Follow these steps.
Use Titanium Backup to backup any applications and data you want to save. If you don't care about the apps/data, you can skip this step.
Boot into Recovery. Power off, when the Moto logo shows for about 1 sec, hold the Vol down. Select Android Recovery.
From CWM, select wipe data/factory reset **Warning - you will blow away all your apps/data *** See note about backing up first.
Follow these steps to ensure a clean first install. Select "wipe cache partition"
Select "Yes - Wipe Cache"
Select "advanced"
Select "Wipe Dalvik Cache"
Select "Yes - Wipe Dalvik Cache"
Select "+++++Go Back+++++"
Select Install from Zip, Select Zip. Navigate to your Team EOS ROM, and install it
IMMEDIATELY after the ROM is installed, install the Google APPS file via Select ZIP.
If you did everything correctly, Reboot. Now Team EOS boot animation should start and ICS will be available to you along with the Market. Restore your apps. Select from Settings to OC to your desired speed and enjoy.
Remember to thank the Devs for all their hard work and donate

al mon said:
To have ICS with Overclock, all you need is:
- Unlocked Bootloader
- Rooted
- CWM Recovery installed (Rogue)
- TeamEOS Wingray Build 60
- TeamEOS Google Apps V10.5
All the other stuff you listed, you can move to another folder for archive. You don't need it.
Follow these steps.
Use Titanium Backup to backup any applications and data you want to save. If you don't care about the apps/data, you can skip this step.
Boot into Recovery. Power off, when the Moto logo shows for about 1 sec, hold the Vol down. Select Android Recovery.
From CWM, select wipe data/factory reset **Warning - you will blow away all your apps/data *** See note about backing up first.
Follow these steps to ensure a clean first install. Select "wipe cache partition"
Select "Yes - Wipe Cache"
Select "advanced"
Select "Wipe Dalvik Cache"
Select "Yes - Wipe Dalvik Cache"
Select "+++++Go Back+++++"
Select Install from Zip, Select Zip. Navigate to your Team EOS ROM, and install it
IMMEDIATELY after the ROM is installed, install the Google APPS file via Select ZIP.
If you did everything correctly, Reboot. Now Team EOS boot animation should start and ICS will be available to you along with the Market. Restore your apps. Select from Settings to OC to your desired speed and enjoy.
Remember to thank the Devs for all their hard work and donate
Click to expand...
Click to collapse
Now, just to be clear, I should root with the universal root?

Do you have Titanium Backup or Rom Manager? Do you also have SU access?
If you do, you most likely have Root, but you can always re-root if you are unsure.

al mon said:
Do you have Titanium Backup or Rom Manager? Do you also have SU access?
If you do, you most likely have Root, but you can always re-root if you are unsure.
Click to expand...
Click to collapse
No, I had just restored my xoom back to factory. I just rerooted, using the universal root, then I wiped all my crap like you said, then I downloaded Eos 60, then I download Gapps and when I download gapps, my xoom says "E:Can't open /sdcard/EOS_GApps_ics_4.0.3_v9.zip (bad) Installation aborted".
Now what :|

You need to flash this version of the CMW Recovery. Without it, you cannot see/mount your SDCard.
http://forum.xda-developers.com/showthread.php?t=1074979
After flashing, reboot into recovery again and it should see the external SDCard which now contains your EOS ROM and EOS GApps. Flash those back to back and you should be good to go.

I CAN see my external SDCard!!!
If I couldn't see it, how could I even be rooted? That's a whole 'nother problem!
Sorry, but yeah, I can't see everything just fine. It's just Gapps is refusing to install, and everytime I install Eos 60, my device won't boot.

Slayergramp said:
I CAN see my external SDCard!!!
If I couldn't see it, how could I even be rooted? That's a whole 'nother problem!
Sorry, but yeah, I can't see everything just fine. It's just Gapps is refusing to install, and everytime I install Eos 60, my device won't boot.
Click to expand...
Click to collapse
Okay... Relax lol
Please answer these questions
1. Have u checked the md5 sums on the gapps and the eos rom? They are provided and a bad installation can mean your files are buggered sooo check the md5 are correct for each file
2. Did you install the rogue recovery or the modded cwm recovery using fastboot? (not using rom manager or whatever)
3. Have you factory wiped before installing the rom?
4. Did you wipe cache and dalvik cache?
5. Did you install the rom then the. Gapps?
6. Did you fix permissions once you finished flashing both files?
Thanks
Sent from my mind control device

joshndroid said:
Okay... Relax lol
Please answer these questions
1. Have u checked the md5 sums on the gapps and the eos rom? They are provided and a bad installation can mean your files are buggered sooo check the md5 are correct for each file
2. Did you install the rogue recovery or the modded cwm recovery using fastboot? (not using rom manager or whatever)
3. Have you factory wiped before installing the rom?
4. Did you wipe cache and dalvik cache?
5. Did you install the rom then the. Gapps?
6. Did you fix permissions once you finished flashing both files?
Thanks
Sent from my mind control device
Click to expand...
Click to collapse
First off, I finally got the EOS rom to work perfectly fine. My problem was that I never wiped the system's cache data or dalvik. And where do I check the Md5 sum for the Gapps? Because they still are a "(bad)" file.
Yes, I use a perfectly fine recovery, not rom manager, what permissions need fixing? Thanks.

Slayergramp said:
First off, I finally got the EOS rom to work perfectly fine. My problem was that I never wiped the system's cache data or dalvik. And where do I check the Md5 sum for the Gapps? Because they still are a "(bad)" file.
Yes, I use a perfectly fine recovery, not rom manager, what permissions need fixing? Thanks.
Click to expand...
Click to collapse
Download a free md5 program...
Look at the md5 when u download the gapps package in the goo in side me link in the eos thread
Sent from my mind control device

joshndroid said:
Download a free md5 program...
Look at the md5 when u download the gapps package in the goo in side me link in the eos thread
Sent from my mind control device
Click to expand...
Click to collapse
What IS md5, what does it need to be, and where do I check it? I don't understand the jibberish in the second half of your sentence.

Slayergramp said:
What IS md5, what does it need to be, and where do I check it? I don't understand the jibberish in the second half of your sentence.
Click to expand...
Click to collapse
Md5 is a unique hash that is calculated depending on the file.. When they match you have exactly what has been uploaded by the developer. When they dont that can be a cause of your problems.. I suggest u know and understand that for future for almost any file you download where one is provided... You can brick your device and it would be your own fault if you didnt check an md5.. So jibberish, hardly..
Now... Google a free md5 program for your computer and download n install it
Go to your relevant eos thread in first post there is a link for latest gapps packages...
Download the latest 10.5v if u havnt
Look at the md5 its displayed when you download the file or on the side of the file in the list...
Put the downloaded file in the md5 program on your computer and compare to the one provided..
Now try to flash this package within recovery...
Be sure to wipe caches, dalvik... Flash gapps.. Go to advanced then fix permissions... Then reboot.. See if it works.. If not try factory reset, wipe cache n dalvik, install rom, then gapps, then fix permissions.. Then reboot
Sent from my mind control device

Help switching back to stock from CM9?

Hi. I'm sort of still a newb to android stuff. This tablet is my 2nd android and I managed to get CM9 on here, after installing some weird recovery through goo manager (other methods of getting Clockwork weren't working for me) I liked the stock from a lot better however, and I would like to switch back. Unfortunately I don't have a backup. I've done a search and haven't found anything. Could someone help me out with this seemingly easy problem?
Sent from my LG-P930 using xda premium

just dl the stock you need.
http://forum.xda-developers.com/showthread.php?t=1697227
extract the zip one time. You have another zip than. Place it on your internal sd.
Go to recovery (must be CWM) and flash the zip:
install zip than choose zip, than find the zip on your sd. than scroll down the no´s till you see a yes and choose this option.
If you dont have CWM recovery installed, take a look here and follow the video guide for fastboot to install CWM again.
http://forum.xda-developers.com/showpost.php?p=27745605&postcount=29

So I need cwm? I can't use the recovery that I got from goo manager?
Sent from my LG-P930 using xda premium

You should go to asus webpage and download the latest firmware that is for your model. Go to settings on your device and at the latest tab see what version of firmware you have. You are looking for US or WW or another. Then go to asus site at download section and download the correct update that suits u. Unzip it once at the main catalog of the tf300 storage and reboot your machine to recovery (turn off and then turn on by pushing volume down and power until u see some message at the top of the screen. Then release the 2 buttons and push volume down and you will be at recovery menu. There choose wipe data/ factory reset and wipe dalvik cache and choose install zip, choose the zip that u previously unzip to your device and confirm to install it. When it is done after about 3 minutes reboot and u are at the latest stock firmware.
Sent from my ASUS Transformer Pad TF300T using XDA Premium HD

I got this tablet from the UK. Do I still use the US firmware update? Also, what do you mean by main catalog?
Sent from my Transformer Prime TF300T using xda premium

BeatByte said:
So I need cwm? I can't use the recovery that I got from goo manager?
Sent from my LG-P930 using xda premium
Click to expand...
Click to collapse
Yes you need cwm. For some reason team win recovery won't flash the stock firmware. It's nice and continues to get updates but they don't have our device. It will eventually get ironed out but for now cwm is needed to return to stock. At least that's how it is on my device and some others here on xda.
Sent from my SAMSUNG-SGH-I727 using xda premium

DONT USE THE US ONE! Ireland and UK tabs are WW, download the .29 from link at the top,
1.extract it
2.copy extracted .zip to your tablet
3. Factory wipe/reset (do this 3 times)
4. wipe cache
5. wipe dalvik
6. click install from zip
7. navigate to where you have the .zip file stored
8. click the file then navigate down to yes.
9. let the file install
10. wipe cache again
11. wipe dalvik again
12. it will take a few minutes to boot so dont freak out (I did wasnt fun trust me)
13. TADA your now back on stock

d_crossfader said:
DONT USE THE US ONE! Ireland and UK tabs are WW, download the .29 from link at the top,
1.extract it
2.copy extracted .zip to your tablet
3. Factory wipe/reset (do this 3 times)
4. wipe cache
5. wipe dalvik
6. click install from zip
7. navigate to where you have the .zip file stored
8. click the file then navigate down to yes.
9. let the file install
10. wipe cache again
11. wipe dalvik again
12. it will take a few minutes to boot so dont freak out (I did wasnt fun trust me)
13. TADA your now back on stock
Click to expand...
Click to collapse
Ah, thanks a lot man. I was literally about to start flashing the US firmware. You probably just saved me from a brick

BeatByte said:
Ah, thanks a lot man. I was literally about to start flashing the US firmware. You probably just saved me from a brick
Click to expand...
Click to collapse
No worries dude! I was pretty paniced when I was doing it, I have a more detailed tutorial here with links to rooting it on stock Link

Soft brick Jelly Bean cm10

Here i tell you the first soft brick with JellyBean ROM......
Steps i performed which resulted in soft brick...
1. i was on ICS ardatdat 4.2b6 with BB Rom..
2. flashed JB on it
3. wiped data..fatory reset....after which there was no network....
4. i had renamed the backup folder, and since there was no file manager i was unable to revert back to correct name...
5. i didnt had the pc, so i was unable to revert back the name...and by this tyme even my mmc became unreadable...donno how
6. flash ics nordic through odin.....now it passes galaxy r screen----->samsung splash screen---->stops at samsung screen..
waited for 10-15mins...bt no avail....
what cld be done now ?? to boot the phone

By jb I hope you mean cm10 right?? I have flashed it many times in the past few days and successfully did a nandriod restore too... Didn't face any issues...
What was the issue with renaming the backup??
From my galaxy R

reboot phone & just wait..
Sent from my GT-I9103 using xda app-developers app

Oops! U haven't read the thread properly... to get the network, u have to disable the mobile data...
In my last build, i have followed the unknownzd steps to remove the emmc bug.. so it should not be the case...
I doubt on ur renaming of the backup folders and all...
File manager is not included and if u have wifi u can download any file manager..
Now what is the condition.. Feel free to PM me...

karthik050782 said:
Oops! U haven't read the thread properly... to get the network, u have to disable the mobile data...
In my last build, i have followed the unknownzd steps to remove the emmc bug.. so it should not be the case...
I doubt on ur renaming of the backup folders and all...
File manager is not included and if u have wifi u can download any file manager..
Now what is the condition.. Feel free to PM me...
Click to expand...
Click to collapse
Yea..i had renamed d backup folder n due to no file manager i cldnt rename back...
For network i tried all...disable mob data...airplane mode...none worked.....
Lately...i reinserted mmc in nokia e71..n was able to read d card..so just renamed..restored.....bingo...........
Nw m on ics with bb rom..
Sent from my GT-I9103 using Tapatalk 2

vipul12389mehta said:
Yea..i had renamed d backup folder n due to no file manager i cldnt rename back...
For network i tried all...disable mob data...airplane mode...none worked.....
Lately...i reinserted mmc in nokia e71..n was able to read d card..so just renamed..restored.....bingo...........
Nw m on ics with bb rom..
Click to expand...
Click to collapse
1. As karthik said first we need to disable the Mobile data in settings-> more, then after few minutes network will work, its working for all of us...
2. i am not able to understand what you are saying about renamed the backup folder, if you rename also just you can boot into recovery and restore it ...
3. You can download any file manger from Play store, i have downloaded it from playstore and its working fine....
4. please explain us the steps what you have followed because from yesterday i am using JB without any issues....
5. Last one as karthik has compiled the kernel from Sources its free from Brick bug no need to worry....

mj.vikram said:
1. As karthik said first we need to disable the Mobile data in settings-> more, then after few minutes network will work, its working for all of us...
2. i am not able to understand what you are saying about renamed the backup folder, if you rename also just you can boot into recovery and restore it ...
3. You can download any file manger from Play store, i have downloaded it from playstore and its working fine....
4. please explain us the steps what you have followed because from yesterday i am using JB without any issues....
5. Last one as karthik has compiled the kernel from Sources its free from Brick bug no need to worry....
Click to expand...
Click to collapse
Cwm recognizes backup/restore folder as
clockworkmod->backup->date->{ all backup files}
I had d convention as
clockworkmod->backup_bak->date->{ all backup files}
Hence cwm cldnt recognize any backup file...
Tried every opt under cwm..as
Restore, advance restore, restore from internal sdcard...
Bt all failed...
Also i didnt had any system/device to rename back to correct convention
Abt file manager, cm10 works nly on wifi..i didnt had any wifi connection in ofc too....so no luck..
Regardin steps i followed are as follows :
1 Was on bb rom..
2 Applied update zip in cwm
3 Wipe cache n dalvik cache...(didnt perform wipe data)
4 Reboot....
5 a lot of fc caused me to perform wipe data thru cwm..
6 after which no n/w
Sent from my GT-I9103 using Tapatalk 2

vipul12389mehta said:
Regardin steps i followed are as follows :
1 Was on bb rom..
2 Applied update zip in cwm
3 Wipe cache n dalvik cache...(didnt perform wipe data)
4 Reboot....
5 a lot of fc caused me to perform wipe data thru cwm..
6 after which no n/w
Click to expand...
Click to collapse
ok if you want to again flash it try to format system buddy..
1. Wipe Data, Dalvick cache.
2. Format system partition.
3. Flash CM10.
4. Flash Gaaps.
this should work because normally i will format the system before every time i flash of CM, believe me you will not go back to ICS once you use it.....

mj.vikram said:
ok if you want to again flash it try to format system buddy..
1. Wipe Data, Dalvick cache.
2. Format system partition.
3. Flash CM10.
4. Flash Gaaps.
this should work because normally i will format the system before every time i flash of CM, believe me you will not go back to ICS once you use it.....
Click to expand...
Click to collapse
Yes my friend......Stock Roms are ****ty...
CM is awesome....i felt really nice..with all the available options in settings..organized properly...with profiles options...
CM rocks..

cwm update

Hi
I tried to install cm11
And I used this guide: http://forum.xda-developers.com/showthread.php?t=2589303
When I wanted to install
I was registered installtaion aborted
And discovered that it was because that cwm I have his version does not match
So I found this: http://forum.xda-developers.com/showthread.php?t=2564767
This update cwm
Is it safe?
Anyone tried it?
Because I want to try it to install kitkat
Sorry for the english, I'm from Israel
And I used Google Translate

eran32 said:
Hi
I tried to install cm11
And I used this guide: http://forum.xda-developers.com/showthread.php?t=2589303
When I wanted to install
I was registered installtaion aborted
And discovered that it was because that cwm I have his version does not match
So I found this: http://forum.xda-developers.com/showthread.php?t=2564767
This update cwm
Is it safe?
Anyone tried it?
Because I want to try it to install kitkat
Sorry for the english, I'm from Israel
And I used Google Translate
Click to expand...
Click to collapse
שלום
Not bad!
Use the Jan 16 version. As with any playing around, do a backup before flashing cm-11. If you need to do any sdcard partitioning, do it on the old version as these functions are not in this new version.

Dovidhalevi said:
שלום
Not bad!
Use the Jan 16 version. As with any playing around, do a backup before flashing cm-11. If you need to do any sdcard partitioning, do it on the old version as these functions are not in this new version.
Click to expand...
Click to collapse
so, download jan 16 version and flash the update zip in recovery?
and then install cm11?

eran32 said:
so, download jan 16 version and flash the update zip in recovery?
and then install cm11?
Click to expand...
Click to collapse
Yes, you flash the new recovery with the old recovery first. Reboot to new recovery. Remember to wipe user data/factory reset along with wiping Dalvik cache and formatting system from the mounts and storage item. Then install your CM11 ROM.

shinobisoft said:
Yes, you flash the new recovery with the old recovery first. Reboot to new recovery. Remember to wipe user data/factory reset along with wiping Dalvik cache and formatting system from the mounts and storage item. Then install your CM11 ROM.
Click to expand...
Click to collapse
Good
So what I gather, I need to install the update zip in cwm
And if I want to install cm11 steps I need?

eran32 said:
Good
So what I gather, I need to install the update zip in cwm
And if I want to install cm11 steps I need?
Click to expand...
Click to collapse
I would hope that the update.zip you are referring to is a flashable recovery. From the link posted it is. It's the newest recovery with support for KitKat ROMs. Flash this like you would flash anything else. IE; Install zip from sdcard. Then go to 'Advanced' and choose reboot recovery. This will reboot you in to the new recovery you just flashed.
From there do "Wipe data/factory reset" and then go to "Advanced" again and select "Wipe Dalvik cache". Go back to CWM main menu and then select "Mounts and storage". From there only select "Format /system". Back to CWM main menu. Select 'Install zip from sdcard'. If the ROM is on your external SD, which it should be, then choose "install from external sd". Confirm the installation and wait for it to install. Back to CWM main menu and choose reboot system. Voila!
Now I don't wanna seem harsh, but there are countless threads that explain how to flash a ROM/zip. XDA enforces using their search function to help prevent multiple threads of roughly the same content from being created. So in the future, please use the Search function before creating a new thread.

shinobisoft said:
I would hope that the update.zip you are referring to is a flashable recovery. From the link posted it is. It's the newest recovery with support for KitKat ROMs. Flash this like you would flash anything else. IE; Install zip from sdcard. Then go to 'Advanced' and choose reboot recovery. This will reboot you in to the new recovery you just flashed.
From there do "Wipe data/factory reset" and then go to "Advanced" again and select "Wipe Dalvik cache". Go back to CWM main menu and then select "Mounts and storage". From there only select "Format /system". Back to CWM main menu. Select 'Install zip from sdcard'. If the ROM is on your external SD, which it should be, then choose "install from external sd". Confirm the installation and wait for it to install. Back to CWM main menu and choose reboot system. Voila!
Now I don't wanna seem harsh, but there are countless threads that explain how to flash a ROM/zip. XDA enforces using their search function to help prevent multiple threads of roughly the same content from being created. So in the future, please use the Search function before creating a new thread.
Click to expand...
Click to collapse
Good man, I'll try it
But after that I'll update I can install the cm7 if I wanted?

Clockwork 6.0 only flash cm10~cm11. If you like to install anothrer version, like cm9 or cm7 you have to flash first rhe clockwork 5.0. And then rwboot recovery and then flash zip. So, once you have downloaded the flashable zip for clock 5.0 and the wanted rom you have to do
1- Copy clock 5 and rom to sd card.
2- Reboot recovery
3- Flash clock 5
4- Reboot recovery
5- flash wanted rom under the rom instructions.
6- Enjoy
Sent from my LG-P500 using xda app-developers app

The cm11 support Hebrew?
and my cwm is 5.0.2.0
so i can upgrade to 6.0.4.6 cwm?

eran32 said:
The cm11 support Hebrew?
and my cwm is 5.0.2.0
so i can upgrade to 6.0.4.6 cwm?
Click to expand...
Click to collapse
I cannot say if CM11 supports Hebrew or not, sorry. However, in order to install CM11 you need the newest recovery 6.0.4.6 as you've already figured out. That recovery, 6.0.4.6, will allow you to swap between CM10.2 and CM11 with no issues. To go back to older Android versions you will need to revert back to your older CWM first.

Clock 5.0 is capable of flash:
-CM7
-CM9
-CM10
-CM10.1
-CM10.2
Clock 6.0 is capable of flashing:
-CM10
-CM10.1
-CM10.2
-CM11
Hope it helps you.

chalo99 said:
Clock 5.0 is capable of flash:
-CM7
-CM9
-CM10
-CM10.1
-CM10.2
Clock 6.0 is capable of flashing:
-CM10
-CM10.1
-CM10.2
-CM11
Hope it helps you.
Click to expand...
Click to collapse
thanks, but i can update from my version?
and not need to flash gapps?
And how to increase space by a partition, you can put some space want?
Because I saw that choose mb

eran32 said:
thanks, but i can update from my version?
and not need to flash gapps?
And how to increase space by a partition, you can put some space want?
Because I saw that choose mb
Click to expand...
Click to collapse
CWM 5.0.2.0 can NOT flash CM11. You will get Status 7 error. You must upgrade recoveries to install CM11.
If you don't plan on having a GMail account attached to the device, have no need for the Play Store and some others, then no, don't flash GAPPs. Though I suspect you'll find that you will want/need to.
There is no safe way to increase the internal memory, as in change partition sizes, of these devices.

shinobisoft said:
CWM 5.0.2.0 can NOT flash CM11. You will get Status 7 error. You must upgrade recoveries to install CM11.
If you don't plan on having a GMail account attached to the device, have no need for the Play Store and some others, then no, don't flash GAPPs. Though I suspect you'll find that you will want/need to.
There is no safe way to increase the internal memory, as in change partition sizes, of these devices.
Click to expand...
Click to collapse
thanks man, you have skype?
and if i want i can downgrade cwm after update?

eran32 said:
thanks man, you have skype?
and if i want i can downgrade cwm after update?
Click to expand...
Click to collapse
Sorry, no Skype for me. Yes you can downgrade CWM but I wouldn't advise it unless you are going to go back to an older version of Android.

shinobisoft said:
Sorry, no Skype for me. Yes you can downgrade CWM but I wouldn't advise it unless you are going to go back to an older version of Android.
Click to expand...
Click to collapse
thanks man, so if i want to install kitkat i'm need to :
1. Update cwm
2. Reboot Into Recovery
3. Do A Full Wipe (Wipe Data + Wipe Dalvik Cache + Wipe Cache partiton + system format)
4. Flash The Rom
5. Flash gapps
6. Reboot
thats fine to do it?

eran32 said:
thanks man, so if i want to install kitkat i'm need to :
1. Update cwm
2. Reboot Into Recovery
3. Do A Full Wipe (Wipe Data + Wipe Dalvik Cache + Wipe Cache partiton + system format)
4. Flash The Rom
5. Flash gapps
6. Reboot
thats fine to do it?
Click to expand...
Click to collapse
I would make a backup of my current ROM with my current recovery before proceeding. After that it sounds like you've got the steps figured out

shinobisoft said:
I would make a backup of my current ROM with my current recovery before proceeding. After that it sounds like you've got the steps figured out
Click to expand...
Click to collapse
fine, but i have cm7 install on sd card
you say that im can downgrade cwm
and if im got brick im can fix it
and to update i'm need to flash the zip?

eran32 said:
fine, but i have cm7 install on sd card
you say that im can downgrade cwm
and if im got brick im can fix it
and to update i'm need to flash the zip?
Click to expand...
Click to collapse
The backup statement I made was just a precaution. It's better to be safe than sorry.
I don't understand why you want to install CM11 and then downgrade your recovery. That makes no sense to me. Any flashable zips that need installed will also need the same recovery. CM11 added some new and reworked commands to the scripting language used to install flashable zips thru recovery. That's why you need to upgrade recoveries.

shinobisoft said:
The backup statement I made was just a precaution. It's better to be safe than sorry.
I don't understand why you want to install CM11 and then downgrade your recovery. That makes no sense to me. Any flashable zips that need installed will also need the same recovery. CM11 added some new and reworked commands to the scripting language used to install flashable zips thru recovery. That's why you need to upgrade recoveries.
Click to expand...
Click to collapse
im install cm11 and all working
but the Cellular Network not working

[Q] How to install Custom ROM?

Hi,
I have rooted my phone!
I found a custom Rom from the other thread!
Now can anyone tell me how to install the custom rom?
i mean after rooting what are the steps i need to follow? should i take backup? should i download recovery software? if so what are steps or download links for it!!
please let me know

hey dude just follow these steps
1) reboot into recovery
2) select wipe data..--then yes
3) select wipe cache--then yes
4) go to ADVANCE select then wipe dalvik cache and battery stats
5) then from main menu got o mounts and storage and select format system
6) go to install zip from sd
7) then go to install zip from internal sd
8) select the zip (rom) and install
9) rom will reboot itself after installation otherwise click Reboot system from main menu after installation
10) start dancing as u have installed your first rom

Hello friend
What is custom ROM
Sent from my A111 using XDA Free mobile app

Where did u find the rom ??
I also have Canvas A111 !
Sent from my A111 using XDA Free mobile app

padk24 said:
Hi,
I have rooted my phone!
I found a custom Rom from the other thread!
Now can anyone tell me how to install the custom rom?
i mean after rooting what are the steps i need to follow? should i take backup? should i download recovery software? if so what are steps or download links for it!!
please let me know
Click to expand...
Click to collapse
Before installing the Custom Rom you need to install the CWM Recovery using Uncle Tools, here is the link http://forum.xda-developers.com/canvas-doodle-2/development/cwm-cwm-recovery-version-5-5-40-canvas-t2435565
Then download the Custom Rom whichever you want, paste it in the SD Card,then boot into recovery
1.Wipe data/factory reset
2.From advance menu do dalvik cache clear
3.Go in mount and storage select format system
4.Select install from SD card and flash rom
:good: You can now enjoy your custom rom

padk24 said:
Hi,
I have rooted my phone!
I found a custom Rom from the other thread!
Now can anyone tell me how to install the custom rom?
i mean after rooting what are the steps i need to follow? should i take backup? should i download recovery software? if so what are steps or download links for it!!
please let me know
Click to expand...
Click to collapse
first u need to flash ur recovery to cwm use flshfy from play s tore and dwonlod cwm from net
hit tnx button if it helps