It's now posible install cm10? - Transformer TF300T Q&A, Help & Troubleshooting

Hi! I've the latest bootloader, from ota jb, and I want to know if now it's posible flash roms like aokp or cm10?
Thank you

tueurises said:
Hi! I've the latest bootloader, from ota jb, and I want to know if now it's posible flash roms like aokp or cm10?
Thank you
Click to expand...
Click to collapse
Not yet but it appears close. Check this thread!!!
http://forum.xda-developers.com/showthread.php?t=1942369
While there click thanks for the op and the dev to show your desire and support.

Related

[Q] ICS or JB Rom for Bluestacks

Hello All
Any one have idea to install custom ICS or JB Rom in Bluestacks, ?
I need to install new android version inside.
Thanks All​
nagar.xda said:
Hello All
Any one have idea to install custom ICS or JB Rom in Bluestacks, ?
I need to install new android version inside.
Thanks All​
Click to expand...
Click to collapse
+1
anybody?
yonijuerga said:
+1
anybody?
Click to expand...
Click to collapse
LOOK HERE THESE ARE THE ROM RELEASES BUT DONT EXPECT ANYTHING LIKE CUSTOM JB OR ICS ROMS...
http://forum.xda-developers.com/wiki/BlueStacks_App_Player
jb
JB roms are pretty buggy right now, not sure if it's the same for everyone though.

[Q] Help With custom roms

Hi People,
I need some Help. My gtab2 when i flash a rom the HW dont work like vídeos in mx player, onde stock it works. I want to use cm but i always have tais problem With any rom.
Thanks for the time and answers.
travassos said:
Hi People,
I need some Help. My gtab2 when i flash a rom the HW dont work like vídeos in mx player, onde stock it works. I want to use cm but i always have tais problem With any rom.
Thanks for the time and answers.
Click to expand...
Click to collapse
Have you tried using a stock based rom, like sungsonic or similar?
Sungsonic works fine. But i want cm 10.1 ;/
travassos said:
Sungsonic works fine. But i want cm 10.1 ;/
Click to expand...
Click to collapse
Sungsonic is based on JB 4.1 and cm10.1 is JB 4.2. I don't think that 4.2 is as stable as 4.1 builds just yet. And I want a winning lottery ticket! Guess we both just have to be patient.
But evento Windows a custom 4.1 like aokp te hw dont work =/
travassos said:
But evento Windows a custom 4.1 like aokp te hw dont work =/
Click to expand...
Click to collapse
I'm running aokp Milestone 1 with no problem at all. I can only recommend either a full mega wipe and fresh install. Or flashing back to 4.0.4 with odin, doing to rooting process again then install up to 4.1.x of your choice.

Hdmi help please

Can anyone tell me witch custom rom have support? Or only stock roms can use it????
I have tried almost all of the cm10.1 roms and its a no good
rivas1981 said:
Can anyone tell me witch custom rom have support? Or only stock roms can use it????
I have tried almost all of the cm10.1 roms and its a no good
Click to expand...
Click to collapse
HDMI works on NUMA. It's ICS stock based, and very stable.
Brought to you by time and relative dimensions in space.
Does it work on the Official JB Leak? Anyone?
ashindnile said:
Does it work on the Official JB Leak? Anyone?
Click to expand...
Click to collapse
I am not 100% sure, but it should. It only seems to be broken in non-stock roms.
Good Luck!

[Q] CM11 Problem with UI

Hello The ui system does not work properly. It happens to anyone else? I use cyanogenmod 11-201402221-NIGHTLY-p5510 and kernel 3.0.31-CM-g9b3f943.
Abade002 said:
Hello The ui system does not work properly. It happens to anyone else? I use cyanogenmod 11-201402221-NIGHTLY-p5510 and kernel 3.0.31-CM-g9b3f943.
Click to expand...
Click to collapse
i think you should try to download latest version and flash
and i think it is a nightly so you will have some isusse
Abade002 said:
Hello The ui system does not work properly. It happens to anyone else? I use cyanogenmod 11-201402221-NIGHTLY-p5510 and kernel 3.0.31-CM-g9b3f943.
Click to expand...
Click to collapse
I'm not experiencing this issue, do you use the JB Bootloader?
Guide to install JB Bootloader
Joery360 said:
I'm not experiencing this issue, do you use the JB Bootloader?
Guide to install JB Bootloader
Click to expand...
Click to collapse
yes i use.
I've experienced the first screen on my tab the first time I tried the Easter egg on SlimKat. Never had a problem since... does the Easter egg persist to do this?
Swyped from my P3110 running SlimKat from the XDA Premium HD app!
happened in all roms :\
Abade002 said:
Hello The ui system does not work properly. It happens to anyone else? I use cyanogenmod 11-201402221-NIGHTLY-p5510 and kernel 3.0.31-CM-g9b3f943.
Click to expand...
Click to collapse
It happened with all kitkat roms i have installed on my p5100 (omni , mokki, cm , sonic hd )
I think that tab 2 10.1 hardware is not good enough to run kitkat animation on this resolution or screen size
Note : it worked perfectly on my samsung s gti9000
No Logcat = No Problem
Joery360 said:
I'm not experiencing this issue, do you use the JB Bootloader?
Guide to install JB Bootloader
Click to expand...
Click to collapse
if i forgot to update the bootloader before install cyanogenmod, do i have install stock rom and initiate the process again or just to update above the cm 11?
Abade002 said:
if i forgot to update the bootloader before install cyanogenmod, do i have install stock rom and initiate the process again or just to update above the cm 11?
Click to expand...
Click to collapse
Nope, you should not need to install the stock ROM if the current ROM is stable enough for you to download the updated recovery. Once you have it downloaded, update the recovery. Then maybe do a complete wipe/factory reset from the recovery, then reinstall CM 11 (or any other) fresh.

[Q] kernel version

Hi all, noob here
thinking of installing a KitKat ROM on my GT-I9105P but I'm having 4.1.2 JB stock ROM, already rooted. Do I need to flash a 4.2.2. kernel first? If yes, which one?
Thanx in advance,
m
mirdza said:
Hi all, noob here
thinking of installing a KitKat ROM on my GT-I9105P but I'm having 4.1.2 JB stock ROM, already rooted. Do I need to flash a 4.2.2. kernel first? If yes, which one?
Thanx in advance,
m
Click to expand...
Click to collapse
You can't flash any of our kitkat roms.They won't boot on 4.1.2 bootloader,before flashing kitkat roms just flash 4.2.2 firmware(via Odin).Now you can flash CM11 or any other kitkat rom.Good Luck!
mirdza said:
Do I need to flash a 4.2.2. kernel first?
Click to expand...
Click to collapse
yes
mirdza said:
If yes, which one?
Click to expand...
Click to collapse
any 4.2.2 ROM for your device, it doesn't really matter since you're gonna flash CM 'over' it anyway
you can find ROMs on sammobile.com

Categories

Resources