I tried to connect my infinity to a 40" Samsung led tv, but all the blacks are rendered pinkish. See attached image.
Already I tried two identical micro hdmi cables.
I cannot tell whether:
- cable just doesn't support infiniy
- hdmi out broken, hw issue
- yet another jelly bean issue
- some weird combination of the above
Cable is http://www.amazon.co.uk/BlueRigger-Speed-Micro-Ethernet-Meters/dp/B00609B3J2/ref=pd_sim_ce_1
Tv is
"Samsung UE40C6530 40-inch Widescreen Full HD 1080p 100Hz Slim AllShare LED Internet TV with Freeview HD"
My infinity is the US model, but TV is UK.
Weird thing that it worked once, but not ever since than.
Cheers
just a quick update.
it worked one more time, picture was perfect, but then quickly switched the input on the TV back and forth (using the remote, without touching the cable, tablet or the TV ) and it broke again, I think this rules out that the cable has contact issues
could it be that the TV is not detecting the signal properly?
s.illes79 said:
just a quick update.
it worked one more time, picture was perfect, but then quickly switched the input on the TV back and forth (using the remote, without touching the cable, tablet or the TV ) and it broke again, I think this rules out that the cable has contact issues
could it be that the TV is not detecting the signal properly?
Click to expand...
Click to collapse
Most common issues:
"So what problems does HDMI regularly encounter? "Many problems have nothing to do with high-speed video," says Jeff. "The majority are issues with I2C, the serial protocol used on the DDC line for EDID (Plug and Play) and HDCP (high Bandwidth Digital content Protection).
"I2C is slow, but very susceptible to stray capacitance issues from connectors, cables or anything the electrical bus is connected to. If capacitance gets to a critical point, it slows the signal 'rise time' needed for proper communication. You can have all the high-speed data bandwidth in the world, but without DDC, you're dead in the water."
Possible results are "failures such as no audio, no picture, pink screen or flashing – it has nothing to do with the high-speed data lines. The video can be perfect, but if the DDC line has rise-time issues, the unit will not pass HDCP, and no picture will be displayed."
TROUBLESHOOTING:
HDMI connection troubleshooting
"Flashes, no audio, or pink screen are usually caused by a bad DDC line. You have to eliminate all the good things to find the bad. Power up the system with all the HDMI cables connected, then try with shorter cables to see if the system works at all. If the system still fails to come on, use different inputs.
"Stray capacitance may be inherent in the hardware, so try a DDC line conditioner which can eliminate a lot of problems. 'If the picture comes on, then goes off, it's likely one of the video TMDS channels has a high bit error rate. Many times the picture comes back with tear lines through it.
"The second case is that the DDC line is just not quite making it, and HDCP is not getting a new refresh key. Here, replace the cable or make it shorter. If all else fails, again try conditioning.
Since we have seen multiple issues with HDMI out with the TF700, I would suggest it is likely a combination of the tablet's DCC and the TV getting a little picky on the signal.
Best advise I can give is to try different TVs, cables and sources. That way you can deduce if the issue is the tab, tv, or cable. If you consistently get a pink inversion on any tv or monitor you connect the tab to... then send the tf700 back and get a replacement.
s.illes79 said:
just a quick update.
it worked one more time, picture was perfect, but then quickly switched the input on the TV back and forth (using the remote, without touching the cable, tablet or the TV ) and it broke again, I think this rules out that the cable has contact issues
could it be that the TV is not detecting the signal properly?
Click to expand...
Click to collapse
I had this issue before and it's the cable. I could watch for 10 min or so then the color changed, then later it's back to normal. My solution is instead of buying another cable, I used my current hdmi cable, which working for my tv for years and just get a hdmi adapter (mini hdmi with regular hdmi female adapter) from Amazon for a few bucks and it works wonder.
http://www.amazon.com/HDMI-Female-M...=1350923284&sr=8-1&keywords=mini+hdmi+adapter
Everyone seems pretty sure about the cable, easy thing to check. However, I would saw that you should also (Lightly) jiggle the cable in the HDMI port. towards the top then the bottom, front, then back. My tablet has isses with the HDMI as well, but when I push the cable to the front (so the tip is touching closer to the back of the tablet using the outer end of the port as a fulcrum) I get picture/audio perfectly. I have to wrap the cable under the dock if I want to watch a movie or something so that it stays this way though.
I guess it could still be my cable, but that seems unlikely. *sigh* it used to work perfectly all the time....
s.illes79 said:
Click to expand...
Click to collapse
Is that picture from the Infinity or the TV. My response below is based on the assumption it's the infinity.
When the cable is connected, but no picture, are you still getting this above? If so, then I would say the TV doesn't like the signal it's getting. I'm not sure what the output is exactly on the Infinity. In general, the north america signals are a 60hz, wheereas the UK is 59hz. If the TV cannot take a 60hz, then it's going to be continuing problem. You may want to try a different a different input on the TV such as DVI and use a HDMI-DVI adapter. I don't think it'll work though.
I would trying fiddling with the TV settings. Maybe turn the TV off than back on. Of maybe you'll need unplug or replug in the cable from the tablet.
I have an issue here and them with a 16" HDTV, but my cable has a short, so I know it's the cable. Mine, when there is no picture, it doesn't show the above.
lovekeiiy said:
Is that picture from the Infinity or the TV. My response below is based on the assumption it's the infinity.
When the cable is connected, but no picture, are you still getting this above? If so, then I would say the TV doesn't like the signal it's getting. I'm not sure what the output is exactly on the Infinity. In general, the north america signals are a 60hz, wheereas the UK is 59hz. If the TV cannot take a 60hz, then it's going to be continuing problem. You may want to try a different a different input on the TV such as DVI and use a HDMI-DVI adapter. I don't think it'll work though.
I would trying fiddling with the TV settings. Maybe turn the TV off than back on. Of maybe you'll need unplug or replug in the cable from the tablet.
I have an issue here and them with a 16" HDTV, but my cable has a short, so I know it's the cable. Mine, when there is no picture, it doesn't show the above.
Click to expand...
Click to collapse
This is how it looks on the tv, taken a shot with my phone. Tried to move, push, twist etc the cable, but picture always pinkish. Also tried turning Tv / tablet on off, no luck.
Just ordered a different, shorter cable, will report back once get it.
lovekeiiy said:
Is that picture from the Infinity or the TV. My response below is based on the assumption it's the infinity.
Click to expand...
Click to collapse
Not to be an ass but look at the picture, clearly it is a Samsung TV that this image is on.
if it's the pink color issue, I would try one of the other TV picture settings and see if that helps. My response prior was for no picture on the TV.
It's possible that tablet is pushing out that pinkish signal, but newer TVs will do a lot fiddling with the signal before it hits the screen.
I have a very basic HDMI problem in that I get nothing at all from the tablet with and HDMI cable plugged in to it. Trouble is, I can't recall what behavior to expect apart from it displaying on my TV; I haven't used HDMI since got the Infinity. I tired using it on my Prime with HBO GO only to find HDMI out is restricted. But, it did work. Anyway, with the Inifnty, I get nothing. The video will continue to display on the tablet. Like others, I have no HMDI settings available anywhere within any settings menu. So, at this point I don't know if it is a hardware defect or software.
I am on Jellybean US 10.4.4.16 build, unlocked and rooted. Any help will be appreciated.
Related
I got a 3.5mm to RCA cable originally intended for camcorders. I checked TV out and when I plugged it in I found that I could hear the audio, but the picture was scrambled. I could see a bit of my wallpaper, but the image was all scrambled. Is this a problem with my cable or my phone?
Try switching between NTSC and PAL in the TV Out Settings. See if that helps. If it doesn't, then I don't know.
Mine was like that too using the cable that came with my old Nokia phone. I tried another cable from my Hava box and it worked like normal. Guessing there is some sort of wire crossed in some that camcorders and stuff can deal with.
Most likely the colors on the cables aren't going to correctly correspond to the colors on your tv, because you don't have a samsung cable that was made for that phone. It'll still work though, just try the three different cables one at a time in yellow (video) jack on your tv until you see the picture clearly. then they other two are audio, could be a little tricker to determine which one is left and which is right however.
He said he could see his wallpaper so his connections are not crossed.
Is your audio nice and clean?
If so my guess is that you are set in PAL format and your TV display is NTSC or the other way round.
If not, could also be that the cable is of the cheaper variety and is not well shielded, or is grounding.
Has anyone with a Revolution 3.6.13 rooted Sensation 4G (T-Mobile USA) tried this MHL adapter for $10.20 from monoprice.com and how is the quality? I'm in need of an MHL hookup but not exactly sure which to get.
pfx
Tried it on the resound, and would lose internet when connected. I keep meaning to pick up the official 15 pin HTC unit. Costs more, but you get what you pay for. If this is useless, please ignore..
Sent from my ADR6300 using XDA
Yeah those are the kinds of glitches I'm hoping to avoid, as having wifi dropout while it's connected would partly defeat the purpose. I found this one also on ebay which has the HDMI cable connected, so it only requires two separate pieces/cables, though I'm not sure if using my own HDMI cable might get better results.
Be careful. For example I'm in need of one too but I don't have HDMI, only DVI.
When using MHL with DVI, you only get a picture on the screen when it updates the screen. It's black the rest of the time unless scrolling, playing a movie, live wallpapers, etc.
So I'm a little SoL.
xhigh, not sure I get the point of your post.. are you saying your tv/monitor only has DVI input? I did mention HDMI specifically in my post, not DVI, so whatever DVI issues there may be aren't an issue.
pfx
HTC Sensation / Revolution 3.6.13 via XDA app
So what is a recommended MHL adapter? Or are we really to spend $30+ on the HTC one?
Looking to be able to play videos (x264) over dlna / samba or whatever to hdmi. Preferably outputting sound through the analog jack still for now.
I took a chance on the Monoprice one, and just received it this morning.. I haven't had time to test it extensively yet, but here's my experience so far...
Pros:
I was able to connect to my 1080P hidef tv without any problems.. connected to HDMI-4, plugged the usb into the side of the tv, and was up and running in literally under 60 seconds. No reboot was needed.
Picture quality is not 100% perfect, but it's nearly so... much more than adequate for viewing movies, previewing photos from the camera, etc. Audio quality via HDMI was also extremely good.
I did *not* lose wifi while connected, as some others have reported. Wifi signal remained strong. I was able to connect via SMB and CIFS and stream music and video, though I haven't tested this extensively yet.
Cons:
I'm not sure if this is normal with MHL connectors, but while the adapter was powered via USB on the side of the tv, the 500mA coming out of the tv was not enough to provide a charge.. During the 30 minutes I played with it, there was a gradual discharge of the phone, so it's not able to keep up with the rate of discharge of the phone, though technically it should prolong the battery life since it is providing some power to the phone. (Technically, the USB power connection to the MHL is to power the HDMI signal, so maybe what I observed is perfectly normal). While plugged in via USB, Minimalistic Text showed a status of 'USB Charging' which was to be expected...
Next I tried plugging the power directly into AC and not the television's USB port.. Interestingly enough, Minimalistic Text again showed a status of 'USB Charging' even though it was plugged into mains power, so it must have something to do with the fact that the mini-USB end of the AC charger isn't being plugged directly into the phone, but through the MHL dongle instead. In any case, and also interesting, the phone was again discharging faster than it accepted charge from AC, but it seemed to be a slower discharge than when plugged into the tv's USB port...
So, all in all, given my intended use which for now is mainly going to be for previewing photos, working with some documents via bluetooth keyboard, and playing P90 and Tapout workout videos, I think it's well worth the price.
If anyone can comment on the USB charging and discharge rates on OEM MHL adapters, that would be helpful.. Is it normal that the phone discharges while connected to MHL, even though it's in a charging state? If so, then I'm more than happy with the one I got from monoprice.. If, however, OEM units do actually build charge while connected, then I might consider one down the road if I find I have more elaborate requirements than I do now...
Offtopic, can anyone recommend good affordable bluetooth keyboards for our phones?
Thanks. That definitely helps! My goal is to play hours of video through CIFS/SMB/DLNA (x264), so it sounds like power will definitely be an issue.
Is MHL/HDMI purely a clone of the phone's screen or what? Wondering if there's any apps out there that can have the phone function as a remote / file navigator, and have video output only go through hdmi.
MHL is a clone of the phone's screen, so you can use ES File Explorer to navigate your CIFS shares, touch your video file, select the appropriate viewer, and it will stream and clone to the tv..
I tried it and it works great
but, buy it in dx
I received my monoprice MHL adapter, plugged the hdmi cable into it, plugged the power into it and plugged it into my phone. the phone shows HDMI hooked up and my monitor will alternate between showing whats on the phone and going to a white fuzzy screen then back to mirrored than fuzzy every couple of seconds.
I plugged my brothers sensation in and it works fine so I doubt it's the adapter, he is rooted running a custom ROM.
I am unlocked and rooted but running stock rom, T-Mobile USA version.
So I went into T-Mobile and asked about this issue, they didn't know, they called tech support who in turn told them to call HTC. They gave me HTCs number, I called and explained what was going on, HTC tells me the phone ISN'T MHL compatible, that we're supposed to use the media link dongle, which costs about $100.
He suggested I try just a straight up micro hdmi cable to my tv instead.
So an older phone (sensation) has the ability, but this new high tech, best of the bunch phone can't do it, what a bunch of ****.
Edit: OK, I figured out the issue, I was running an HDMI to VGA cable to my monitor, since the monitor is a VGA connection. I then went ahead and hooked it up to another monitor that had a straight HDMI connection and it worked perfect, so VGA HDMI cable no good, straight up hdmi to hdmi works great!
Edit 2: So I just tried the MHL adapter again with the vga HDMI cable, and now it works. It's like it needed one cable to make it work and now it will work with the other, nothing changed except that I tried it another TV.
a HDMI to VGA cable? as long as you dont have special equipment this cable can't be used for anything HDMI is a completly digital standard. DVI is digital + analog so a VGA - DVI adapter is possible, but HDMI to analog is without special hardware impossible.
stunner2002 said:
a HDMI to VGA cable? as long as you dont have special equipment this cable can't be used for anything HDMI is a completly digital standard. DVI is digital + analog so a VGA - DVI adapter is possible, but HDMI to analog is without special hardware impossible.
Click to expand...
Click to collapse
You are correct sir, my bad, it is a DVI cable. So just replace VGA with DVI in my first and second post.
The cable I have is this one.
Thanks.
Okay. Could be a problem with HDCP.
Gesendet von meinem HTC One S mit Tapatalk 2
I'n having this issue too.. still unresolved
My MHL came in 2 days back. Hooking the phone up keeps alternating between what's on the phone and the white noise screen. I have a straightup HDMI cable going from the MHL to my LCD TV.
Any suggestions are welcome
KT said:
I'n having this issue too.. still unresolved
My MHL came in 2 days back. Hooking the phone up keeps alternating between what's on the phone and the white noise screen. I have a straightup HDMI cable going from the MHL to my LCD TV.
Any suggestions are welcome
Click to expand...
Click to collapse
OK, I noticed if i just go and hook up my cable to the mhl the problem comes back, the solution is to hook everything up to the phone, then reboot the phone and the problem will be gone. One other thing is make sure you have your media volume turned up as it affects sound output, so if your media volume is muted, it will also be muted or whatever volume the phone is set at. I thought I was nuts when there wasn't any sound coming from my stereo until I realized that I had my volume all the way down.
DO the reboot thing and it should work no problems, also, our phones don't need to be plugged in to your power cord to use the MHL, so I'm wondering if the MHL adapter is even necessary for us if we can live without the power cord needing to be attached.
Ready2Mosh said:
OK, I noticed if i just go and hook up my cable to the mhl the problem comes back, the solution is to hook everything up to the phone, then reboot the phone and the problem will be gone. One other thing is make sure you have your media volume turned up as it affects sound output, so if your media volume is muted, it will also be muted or whatever volume the phone is set at. I thought I was nuts when there wasn't any sound coming from my stereo until I realized that I had my volume all the way down.
DO the reboot thing and it should work no problems, also, our phones don't need to be plugged in to your power cord to use the MHL, so I'm wondering if the MHL adapter is even necessary for us if we can live without the power cord needing to be attached.
Click to expand...
Click to collapse
Thanks.. Will try and circle back..
Re: The power cord, not sure if it's 'needed' but I'm guessing without external power the phone wouldn't last an hour.
Seperate issue - When I last tried, I was playing around with it and the phone heated to a point it was slightly uncomfy holding the phone.
KT said:
Thanks.. Will try and circle back..
Re: The power cord, not sure if it's 'needed' but I'm guessing without external power the phone wouldn't last an hour.
Seperate issue - When I last tried, I was playing around with it and the phone heated to a point it was slightly uncomfy holding the phone.
Click to expand...
Click to collapse
Yup, without the external battery going to the phone it will drain dramatically. I also noticed the heating issue you mentioned.
Ready2Mosh said:
OK, I noticed if i just go and hook up my cable to the mhl the problem comes back, the solution is to hook everything up to the phone, then reboot the phone and the problem will be gone. One other thing is make sure you have your media volume turned up as it affects sound output, so if your media volume is muted, it will also be muted or whatever volume the phone is set at. I thought I was nuts when there wasn't any sound coming from my stereo until I realized that I had my volume all the way down.
DO the reboot thing and it should work no problems, also, our phones don't need to be plugged in to your power cord to use the MHL, so I'm wondering if the MHL adapter is even necessary for us if we can live without the power cord needing to be attached.
Click to expand...
Click to collapse
Update: So I tried hooking up all the cables to my phone, restarted the phone and then plugged it into the TV. It still gives me same results unfortunately. I get a display but it keeps going away every few seconds and the white noise screen appears.
What a buzzkill... My old phone (Sensation) was flawless in this respect
I recently received an HDMI to Micro-HDMI cord, and was excited to test it on my 37" Panasonic.
I have tried every combination of turning on and off the TV/Tablet first etc...and it STILL will not show up on my TV. It's acting like there is nothing connected at all. No prompts.
So...what am I doing wrong? The cord I bought was 3 bucks on Amazon, so it may be a knock off or something. Buy a new cord? Any help is appreciated. Half the reason I bought this thing was to watch movies on my hdtv.
roncoallstar said:
I recently received an HDMI to Micro-HDMI cord, and was excited to test it on my 37" Panasonic.
I have tried every combination of turning on and off the TV/Tablet first etc...and it STILL will not show up on my TV. It's acting like there is nothing connected at all. No prompts.
So...what am I doing wrong? The cord I bought was 3 bucks on Amazon, so it may be a knock off or something. Buy a new cord? Any help is appreciated. Half the reason I bought this thing was to watch movies on my hdtv.
Click to expand...
Click to collapse
I would try to find another TV to test with... Maybe a display model in a retail store if you don't know anyone with a TV that you can test with?
Sent from my ASUS Transformer Pad TF700T using Tapatalk 2
My micro HDMI cord only worked on my LG when I first selected the input on my TV and then unplugged and plugged the HDMI cord back into the Infinity. Also make sure the cord is plugged ALL the way in.
When I played NetFlix on the tablet, the TV would display the video and sound, but the closed captioning stayed on the device.
roncoallstar said:
I recently received an HDMI to Micro-HDMI cord, and was excited to test it on my 37" Panasonic.
I have tried every combination of turning on and off the TV/Tablet first etc...and it STILL will not show up on my TV. It's acting like there is nothing connected at all. No prompts.
So...what am I doing wrong? The cord I bought was 3 bucks on Amazon, so it may be a knock off or something. Buy a new cord? Any help is appreciated. Half the reason I bought this thing was to watch movies on my hdtv.
Click to expand...
Click to collapse
I bought a Micro HDMI to HDMI cord on amazon for about 3 dollars also, it worked perfectly fine on my 42inch LCDTV Panasonic. All I had to do was connect it and change the input on the TV to the right HDMI and it worked fine. Although watching movies with subtitles didn't work so well as the subtitles was left at the tablet screen, and I couldn't turn the tablet screen off while watching movies on my TV.
when you plug in the HDMI cord, the TF700 should show some kind of "HDMI" noticifation, and will stay on when connected. If you're not seeing this, then you'll need to figure out if it's the cord or HDMI port on one of your devices. The TV, hook something else to it that used HDMI. The cord, try another cord. Monoprice has them cheap too; probably like $5 with shipping. If you're not seeing the HDMI notification after the cord, and you know they cord is good, it's your TF.
lovekeiiy said:
when you plug in the HDMI cord, the TF700 should show some kind of "HDMI" noticifation, and will stay on when connected. If you're not seeing this, then you'll need to figure out if it's the cord or HDMI port on one of your devices. The TV, hook something else to it that used HDMI. The cord, try another cord. Monoprice has them cheap too; probably like $5 with shipping. If you're not seeing the HDMI notification after the cord, and you know they cord is good, it's your TF.
Click to expand...
Click to collapse
I have problems as well, tried to connect my tf700 to my samsung UE46ES8005 led tv but cant get it to work
On LG i have no problems at all, but the samsung refuses. Tried different cables to no avail.
I have sent a mail to samsung support 3 days ago but no answer.... hmm
//Mackis
same her it works on my monitor but i have Panasonic tv and it doesn't work tried a variety of cables and no go but tried on a Toshiba TV at parents and it works.i had the prime and it work just fine
Asus really needs to add some HDMI scaling options to the TF700 to allow it to work with more TV's - I'm assuming these issues are because the TF700 only seems to output at it's native resolution, which most devices don't seem to like... I'll do some testing with my Toshiba 1080p TV today, just to see what I can find out as well and report any findings that may be useful.
Sent from my ASUS Transformer Pad TF700T using Tapatalk 2
I've connected the TF700T to be Panasonic 55TV50 Plasmass HDTV and to a Vizio 16" LCD TV. No issues.
Connecting to 2 Vizio tvs and a Hitachi no problem.
Our 58 inch Samstung plasma only sees the tablet connection on HDMI 3 which is the recommended port for a monitor hook up from a pc.
Sent from ???
There is a HDMI encryption called HDCP that basically makes it more annoying to use HDMI than it should. Some TV's do not have HDCP enabled. Since the Infinity FORCES HDCP chances are whats happening is the TV doesnt know what to do with the encrypted signal and the tablet doesnt want to play nice so the TV will work.
Unfortunate for you, im guessing your TV is not compatible. Sorry for the bad news mate.
There have also been problems with people trying to use HDMI - DVI adapters and connect into DVI monitors, since a lot of (older) DVI devices also dont support HDCP or sometimes the connector itself doesnt have the right connections to make HDCP work often it all just doesnt work properly. Maybe in time there will be a hack to disable HDCP, until then theres not much you can do.
pileot said:
There is a HDMI encryption called HDCP that basically makes it more annoying to use HDMI than it should. Some TV's do not have HDCP enabled. Since the Infinity FORCES HDCP chances are whats happening is the TV doesnt know what to do with the encrypted signal and the tablet doesnt want to play nice so the TV will work.
Unfortunate for you, im guessing your TV is not compatible. Sorry for the bad news mate.
There have also been problems with people trying to use HDMI - DVI adapters and connect into DVI monitors, since a lot of (older) DVI devices also dont support HDCP or sometimes the connector itself doesnt have the right connections to make HDCP work often it all just doesnt work properly. Maybe in time there will be a hack to disable HDCP, until then theres not much you can do.
Click to expand...
Click to collapse
Again pileot... HDCP has NOTHING to do with it. Find me a monitor/tv that does have HDMI that does not have hdcp enabled..... they don't exist anymore.
If it has HDMI... then chances are 99.999999% that you have an HDCP compliant monitor.
http://answers.yahoo.com/question/index?qid=20090922221218AAyrnYz
DVI will not work because the 5v signal that is needed for the monitor to recognize that something is connected to it-- is not sent with our tablets.
Seems this question is repeated as soon as it falls off the first page......
Hey everybody,
I bought an Advent Tegra Note a couple of days ago. I always connect my devices to a TV at some point but there wasn't too much infomartion out there about the Tegra Note before I got my hands on it so I just wanted to put some info out there for people who might be interested.
The Note has both micro USB and Micro HDMI ports so I bought a micro HDMI to HDMI cable to test out a few things with it connected to a TV. I've used MHL a lot in the past so I'm not sure whether or not some of what follows is specific to the Tegra Note or applies to any tablet with both HDMI and USB ports.
HDMI to TV:
When you plug the HDMI cable into the Note it automatically kicks the display into landscape so you don't need to worry about the orreientation of the tablet itself.
Sound output seems to be at line-out level. It sounds great if you happen to have your TV plugged into a HiFi, but it does mean you can't alter the volume on the Note itself while it's plugged in.
In my experience, when you plug a phone into a TV via an MHL adapter it seems to really load the hardware which has a negative impact on performance. I don't know if it's because the Tegra 4 inside the Note is so powerful or if it's a feature of having a separate HDMI output, but there's no noticeable slow down at all. By way of example, when I ran Epic Citadel with ultra high settings in benchmark mode, it still achieved 59 fps. Web browsing was flawless too with very smooth performance.
I should probably point out that I was testing this on a 720p TV, not full HD.
USB On-the-Go
With a small OTG adapter plugged into the micro USB port I tried plugging in a wireless keyboard and mouse and it works perfectly (bear in mind if you have a UK QWERTY keyboard some symbols are in the 'wrong' place which is bit stupid for a device being sold in the UK). Next up I tried a bus powered 80GB hard drive and this also worked fine. Finally I tried a mains powered USB hub with the keyboard and hard drive plugged into it and that also works properly too. The tablet appeared to be drawing charge from the USB hub.
Simultaneous HDMI and USB OTG
At first this didn't work at all, but I found if I plugged the USB OTG adapter into the tablet first, then the HDMI cable, everything worked fine. In this setup it really is like a little media pc - it performs very well indeed.
I also tried using a small bluetooth keyboard with trackball mouse with it and that works too. I haven't tried a controller yet. I've read elsewhere that Six Axis Controller won't work with it which is a real shame, but there you go.
Apart from the rather creamy/yellow colour tint to the screen on the Tegra Note, it really is an awesome little device. 35,000 points in Antutu for $200? Awesome!
If you're in the UK and you're frustrated by the lack of UK QWERTY keyboard layout ( no £ symbol etc) you can use the Median External keyboard app from the Play store without root. This will add a UK layout under the hardware keyboard settings area under the 'Language and Input' menu. Hint, you have to connect the keyboard to get the hardware keyboard menu to appear in the input menu.
UPDATE: After the official OTA update to 4.3 I noticed a few things:
It is no longer necessary for users to download the Medion External keyboard app to get access to a UK QWERTY hardware layout. Under the input settings menu there is now an option to select a UK Android PC keyboard layout. On both my bluetooth and wireless desktop keyboards, the internet explorer shortcut key works as the Home button. Regrettably the auto correct options for hadware keyboards still don't work.
Unfortunately bluetooth is even worse than under the original or updated 4.2.2 ROM. When steaming via A2DP there are regular dropouts and reconnecting paired devices such a Moga Pro gamepad repeatedly fails at times. A factory reset didn't help.
When trying to disconnect an external HDD in the Settings/Storage menu, not only does the USB drive get unmounted, the MicroSD card stops working. The capacity and free space and of the MicroSD card will read as zero after the external drive has been disconnected. Restarting the Note (or remounting the SD card) will fix the problem, though for me the Gallery and Google Music apps became corrupted and I had to clear the data in Media Storage, Gallery and Music apps and reboot to get things working again. This bug was not present before.
I've also been playing with an Justop EZCast dongle that I bought from a reseller on Amazon. Results are very mixed. In EZCast mode pictures are streamed to the dongle very well. Videos are really hit and miss. Some stream flawlessly while others stutter to the point of being unwatchable. In EZMirror mode where the whole of the tablet's screen is mirrored on the TV results also vary. Music streaming sounds good but there are often dropouts and 'pops' and 'sqeaks' every so often that are really annoying. Also, altering the volume on the tablet does not change the volume on the dongle (whereas it does if you stream from a Galaxy Tab 3 8.0). Streaming films is also problematic in that there are periodic interruptions that are really annoying. Finally, if you connect to a wireless access point while in EZMirror mode you can mirror your browser etc to the TV which opens up a range of possibilities. You can even mirror writing on the screen to a TV so the Note would make an interesting presentation device in various scenarios. Gaming is not recommended as there is latency of about a quarter of a second. In short, when the dongle works it's great, but for now it is flawed and I wouldn't recommend one. I'm not sure whether future firmware updates will improve the dongle, but I suspect its internal hardware isn't powerful enough, especially for HD content.
I've not noticed a yellow tinge to mine, im pretty impressed especially at currys current 130 quite price!
Was going to get a micro hdmi adapter at some point, I'd like the slide cover, but that seems non existent in the uk
Sent from my C6603 using Tapatalk
fards said:
I've not noticed a yellow tinge to mine, im pretty impressed especially at currys current 130 quite price!
Was going to get acreamy and yellow hdmi adapter at some point, I'd like the slide cover, but that seems non existent in thintermittent fault. from my C6603 using Tapatalk
Click to expand...
Click to collapse
I think maybe it's because I'm used to to Super LCD screens. If you put one beside the Note and look at the gmail and Play icons they look a little creamy and yellow. Next to a 2013 Nexus 7 it looks awful, but now Currys have dropped the price to £99, who cares?
You need an Micro HDMI plug not a Mini HDMI plug as I found out last week. I bought mine from an Amazon reseller for about £2. Asda sell them in store for £6-9 dependent upon brand from memory.
Make sure your headphone jack works properly, mine had an intermittent fault.
If you bought your Note in the last seven days you may be able to get Currys to refund the difference, especially if you ordered online.
Ouzo said:
If you bought your Note in the last seven days you may be able to get Currys to refund the difference, especially if you ordered online.
Click to expand...
Click to collapse
aye, I've heard, but not really sure its worth the effort of dealing with the robots at CS, as I did a click&collect
fards said:
aye, I've heard, but not really sure its worth the effort of dealing with the robots at CS, as I did a click&collect
Click to expand...
Click to collapse
I felt the same way but I found a non 0844 contact number and gave it a shot. Allegedly the difference has been refunded onto my card, though I haven't checked yet. The number is 01594 332592 and it answers as Currys Know How. I should add that I paid online and had the Note delivered to store rather than Click and Collect (or whatever it is where you reserve then pay in store).
I have picked a UK Tegra Note up for 99 quid. Really is very quick and have found that enabling 4xMSAA in developer options doesn't degrade performance in gaming.
I picked up a 30 quid miracast box from Curry's. Miracast works okay, image quality is good, but sound can fall out of sync. However with only one WiFi channel you cannot use streaming services. Although you could always set up another android device as a Bluetooth tether connected to WiFi.
Anyone got an Apps to SD solution?
kHiTe said:
I have picked a UK Tegra Note up for 99 quid. Really is very quick and have found that enabling 4xMSAA in developer options doesn't degrade performance in gaming.
I picked up a 30 quid miracast box from Curry's. Miracast works okay, image quality is good, but sound can fall out of sync. However with only one WiFi channel you cannot use streaming services. Although you could always set up another android device as a Bluetooth tether connected to WiFi.
Anyone got an Apps to SD solution?
Click to expand...
Click to collapse
Doh! I didn't realise Currys sold them - I just ordered one online from Amazon. Good point about the lack streaming services.
I only tried 4xMSAA in Modern Combat 3 and I couldn't see much difference in quality. Perhaps I'll try again. I'd love to be able to get rid of the colour banding in certain scenarios (colour crush) as it's very unattractive. Into the Dead is a good example.