I'm trying to transfer files from my PC to my tablet, but the PC doesn't recognize the tablet - it wants me to format it. Same thing when I try to transfer the files from my mp3 player, the content of the player should be listed in the usbdisk folder, correct?
This is driving me NUTS, I'd appreciate some help. Oh, and tablet is rooted - VEGAn.
Thanks!
NeedleNerd said:
I'm trying to transfer files from my PC to my tablet, but the PC doesn't recognize the tablet - it wants me to format it. Same thing when I try to transfer the files from my mp3 player, the content of the player should be listed in the usbdisk folder, correct?
This is driving me NUTS, I'd appreciate some help. Oh, and tablet is rooted - VEGAn.
Thanks!
Click to expand...
Click to collapse
Do you have ADB working
OK, please bear with me, I'm noobish - but what is ADB?
NeedleNerd said:
OK, please bear with me, I'm noobish - but what is ADB?
Click to expand...
Click to collapse
http://developer.android.com/guide/developing/tools/adb.html
Rooting this Gtab is somewhat of a different process fyi
You could always use dropbox, Google it
It works fine for me, with no ADB installed (Vegan 5). Plugging the Gtab straight into the PC and turning on USB storage should recognize it as a USB storage device, like any other USB key.
OP, what operating system are you using? Have you tried a different USB cable? A different USB port on the PC? Perhaps a different PC (if one is available)?
BigJohn
NeedleNerd said:
I'm trying to transfer files from my PC to my tablet, but the PC doesn't recognize the tablet - it wants me to format it. Same thing when I try to transfer the files from my mp3 player, the content of the player should be listed in the usbdisk folder, correct?
This is driving me NUTS, I'd appreciate some help. Oh, and tablet is rooted - VEGAn.
Thanks!
Click to expand...
Click to collapse
Hi,
For the PC, are you connecting from your regular size USB connector on the PC to the *mini-USB* port on the side of the Gtab (not the full-size USB under the cover on the side of the Gtab)?
The mini-USB connector is the one you need to use to connect to your PC.
The full-size USB under the cover is a "host" USB, i.e., you can connect a flash USB drive or USB hard drive to that, and then assuming it's formatted FAT32 with only ONE partition, you should be able to see it on the Gtab under /usbdisk.
Jim
- My PC OS is Windows XP
- I am using the small port on the tablet, not the USB port under the cover, to connect to the PC
- I don't have a different cable/PC to try it with
- FYI - it WAS initially working when I tried to transfer files from my mp3 player to the tablet, the transfer was interrupted when the cord came loose from the tablet, and now it's no-go for both the PC or mp3 player file transfer process
- I do have a permanent folder usbdisk on the tablet, even when there's nothing plugged into the usb ports
Thanks for all the questions and suggestions, I'm glad there's people more savvy than I am with this, willing to help!
NeedleNerd
The small port (like a camera cord) should work. The cable has a USB end on the PC side. It should be recognized on the PC as an external drive. No need to install ADB unless you want to try that too.
One idea is try plugging the USB cable into different ports on the PC end.
If you have wireless and can share network drives on your PC, try File Expert. Its free and can be found in the market. With it I can connect to my PCs drives and copy to SD or USB in my GTab right on it. Granted, it took quite some time to copy a 1GB movie to SD2 (10 min), but it worked. I had to prevent my device from sleeping though or the transfer failed. Worked well though. I'm on TnT lite.
NeedleNerd said:
- My PC OS is Windows XP
- I am using the small port on the tablet, not the USB port under the cover, to connect to the PC
- I don't have a different cable/PC to try it with
- FYI - it WAS initially working when I tried to transfer files from my mp3 player to the tablet, the transfer was interrupted when the cord came loose from the tablet, and now it's no-go for both the PC or mp3 player file transfer process
- I do have a permanent folder usbdisk on the tablet, even when there's nothing plugged into the usb ports
Thanks for all the questions and suggestions, I'm glad there's people more savvy than I am with this, willing to help!
NeedleNerd
Click to expand...
Click to collapse
Hi,
I seem to recall that roebert (I think) had a problem w the miniusb connector being loose or broken. Have you looked at the connector in detail? Maybe the solder connection broke and it 'jiggles'? If so, probably need to get it repaired.
Jim
Well, I know it's not the cable, because I used it to transfer files from PC to mp3 player without any problems.
My PC shows the tablet (drive letter E assigned to it when plugged in), but I can't access the tablet - it's like the PC recognizes something is plugged in, but it doesn't recognize it as having content or something.
On top of that, I kept getting the android.process.acore error, so I did a datawipe and had to re-download all my apps again, to add to the aggrevation.
I will look at the different solutions suggested and if they're not requiring too much advanced knowledge, I will attempt them.
Thanks again for the help & suggestions so far, hopefully I will somehow stumble onto a fix that works!
So, I figured it out. Really simple - if you know how.
The VEGAn root is what did me in - when you plug in the cable, it doesn't give you the option to turn on the USB Mass Storage, which you need when you want to transfer files from PC to tablet. The unrooted device was a bit more user friendly by walking you through it when the cable was plugged in.
I figured out that if you tap and drag down on the USB icon on the top of the screen you can actually access the options - it's not just a status icon!
Hopefully this'll help out someone else who's rooting their tablet following instructions blindly without really knowing what's what!
Thank you again for all the suggestions, I really appreciate all the responses!
Astro SMB Module
If you are working on a home/private network and the file is on a shared network drive, you can map it in using Astro and the SMB Module for Astro ("Astro SMB" returns both in the market provided you have the market fix) and browse shared network drives just like you would on your laptop or PC.
Once installed, a network icon appears in Astro (looks like an upside down "T" or an old school windows network icon) and you can map in your network drives pretty easily. I use this with NAS and work files pretty regularly. You may have to enter alternate or domain specific credentials to make it work.
EDIT: Also I believe there are file format limitations, OS limitations, but haven't fully explored that.
I don't know what to do about this sudden problem. I've had my transformer since early May with the dock. I've never had any trouble connecting to any computer via the usb cable until this past weekend. Now all of a sudden it won't even show as connected when the tablet is connected to the dock.
So I tried it directly connected to the tablet and it will connect and come up on the computer but most of the time it kicks out after a little bit or when loading the files in a folder it just gets stuck loading and will not move so I can't move files to it.
I know I can transfer files with things like dropbox, but I move files every day and don't feel like fighting with the transformer for a half hour every day to get files where I want them when under normal circumstances I can move them in seconds via usb.
I tried calling support but all I got was a bunch of BS about needing to install all the software from their site which I actually did and it didn't fix anything.
Both computers I normally use are Windows 7 64 bit machines.
Anyone run into a similar issue? Any ideas?
Thank you ahead of time.
Try enable USB debugging.
Go to Settings --> Applications --> Development --> Check box for USB Debugging.
There's fews options you can (Do a backup first) try:
1) Reset to factory settings.
2) Format your microSD.
3) Re-flash the ROM.
Besides there's many ways to transfer files from Asus pad to PC.
Wireless Transfer.
FTP Transfer.
Wireless or FTP.
OP, sorry to hear about the issue. In the instances where you are able to connect via USB, if you leave it alone (don't' touch it), then can it complete the transfer? Since the Transformer uses the same connector to charge and transfer, I'm just wondering if the connector is physically getting lose or something.
When I had the transformer, I usually use the micro-SD card to transfer files. But that's just me.
makec3rt said:
Besides there's many ways to transfer files from Asus pad to PC.
Wireless Transfer.
FTP Transfer.
Click to expand...
Click to collapse
Not to criticize your idea or be a jerk...but what does that mean? I don't think 1) wireless transfer and 2)FTP transfer counts as two different methods of transfer. That's like calling USB and "drag-and-drop" two different ways of transferring stuff to devices. Wireless is wireless, whether you're using a FTP protocol or just downloading using the browser.
Similar Issue
I had a similar issue when (but before) I rooted my TF. My Windows 7 64-bit machines wouldn't notice my device unless debugging was enabled and then I couldn't "safely" disconnect the device unless I disabled debugging.
I'm not quite sure what the issue is there but that is how I connect and disconnect.
Thanks for the reply. USB debugging was already turned on so I tried without it. No luck. I'm on hold with support again. If nothing comes from it I guess I will need to reformat. I never rooted so I doubt it's a rom issue.
As I was typing they said to download and install the latest firmware. I've kept this thing up to date, but I guess it's worth a try.
coachclass said:
OP, sorry to hear about the issue. In the instances where you are able to connect via USB, if you leave it alone (don't' touch it), then can it complete the transfer? Since the Transformer uses the same connector to charge and transfer, I'm just wondering if the connector is physically getting lose or something.
When I had the transformer, I usually use the micro-SD card to transfer files. But that's just me.
Not to criticize your idea or be a jerk...but what does that mean? I don't think 1) wireless transfer and 2)FTP transfer counts as two different methods of transfer. That's like calling USB and "drag-and-drop" two different ways of transferring stuff to devices. Wireless is wireless, whether you're using a FTP protocol or just downloading using the browser.
Click to expand...
Click to collapse
I got it to work one time. Every other time it just gets stuck loading the content of the folder. If I try to add anything it just sits there as it seems to be waiting for it finish loading. It's just so weird as it has worked perfectly for two months now and then all of the sudden it stopped working. I would maybe understand if there was an update or something but nothing's changed on the tablet or the computers.
I have the same issue with my usb and EVERY device. It all started when I updated the usb drivers with the nvflash certificate. Now when I want to use a usb device or my on board card reader I have to uninstall the general usb driver in the windows device manager, and for new devices. Only then will it recognize whatever I may have conected.
shaensgen said:
I have the same issue with my usb and EVERY device. It all started when I updated the usb drivers with the nvflash certificate. Now when I want to use a usb device or my on board card reader I have to uninstall the general usb driver in the windows device manager, and for new devices. Only then will it recognize whatever I may have conected.
Click to expand...
Click to collapse
oh the weird usb issues I've seen. Right now my system says that it doesn't have drivers for my vibrant and yet I can connect it and access it perfectly
Try format your microSD yet? Use SD Formatter 3.0.
coachclass said:
Not to criticize your idea or be a jerk...but what does that mean? I don't think 1) wireless transfer and 2)FTP transfer counts as two different methods of transfer. That's like calling USB and "drag-and-drop" two different ways of transferring stuff to devices. Wireless is wireless, whether you're using a FTP protocol or just downloading using the browser.
Click to expand...
Click to collapse
With wireless (using Wifi File Explorer), you just enter the asus epad (ip address) on the browser to download/upload/etc... files from your asus pad.
With FTP, you will need install ftp client on your windows to access files on your device.
makec3rt said:
With FTP, you will need install ftp client on your windows to access files on your device.
Click to expand...
Click to collapse
Windows XP and newer versions already have an FTP client - Windows Explorer.
I use the free "Software Data Cable" app. It creates the FTP server on your Transformer, and gives you the address to type into Windows Explorer.
It works great! You can transfer files using your PC, which is a lot easier than doing it on the Transformer.
I haven't used the USB connection since!
Thanks for the replies. I think this thing needs to be rma'd. I just did a factory reset and it's still having issues. I managed to get it connected only through a direct connection and it won't even let me create a folder. It's getting a little late to do it now so I'll call asus tomorrow morning and get it started.
app is nice! being able to have phone on the charger and still respond to text messages is nice and handy as it allows me to respond quickly and painlessly. It also allows managing contacts more easily in that I can do it from the keyboard. The webcam feature I'm liking...must find some nefarious way to use this The file manager totally pwns. I can't tell you the number of times I've had to get the usb cable from my charger to connect it to my pc to transfer a file then disconnecting from my pc to transfer it back to the phone. One word of caution though. You'll need to root your phone to take advantage of some of the more advance features. I just got a new phone today, photon 4g, and can't wait to see this in action. Mad props to dev.
i remember in the wm6.5 days there was a mod/app to enable using the phone as a usb keyboard for any pc.
just start the app, plug your phone into usb port, and pc recognizes a new HID kb device.
so basic, so useful, so priceless, used it all the time in the field, and saved lugging around a keyboard to every job site.
seems android requires a custom kernel to achieve this without needing an app installed on the pc itself, from the one app i found in the market.
just seeing if anyone has any ideas to make this feasible with just an app, so it could be used on a stock rom, without needing custom kernel.
My Oneplus One had water damage and the screen shorted. It appears to still be working behind the scenes - I can turn it off and on, it makes sounds and lights for notifications, etc. - but the screen is completely black and unusable. Luckily, most of my stuff was backed up to the cloud, but I still have a few files I'd like to get off it if I can. Does anyone have any idea how?
I had ADB, etc. set up on my Win 7 work computer, so I was going to use that, but whenever I plug it in, the computer wants to download and install an MTP driver, fails to do so, and leaves me unable to access the phone. I tried plugging it into my Win 10 personal computer and it shows up as a "functioning" MTP device in Device Manager, but not in Windows Explorer, so I'm not sure how to access anything on it. I installed the Samsung ADB drivers but it won't let me update the drivers for my MTP device at all, so I don't know how to associate them with the phone.
After reinstalling some drivers I can get it to connect as MTP. However, I'm not trying to download videos or photos. I'd primarily like to download some saved game files, and see what text messages I may have missed in the 3 weeks or so it took me to get a new phone (I had a temp phone with a different number during that time). Does anyone have any idea how I can do this? Is there a way to use the computer to switch the connected mode or to pull this info while in MTP?