Related
Hi All.
I'm new to this and trying to install my first rom (aiming for cynagenmod 7- it has the language support i need, or so they say)
I rooted my phone and followed a yourtube video titled "How To Install CyanogenMod 7 Nightly on T-Mobile G2x after Nandroid Backup"
When i get to the part where i need to install zip from sd card, i can't find the file. I went back and copied the zip file into a few different folders, and although i can locate the folders, it tells me that the file cannot be found.
How do i get around this? Your help is much appreciated.
Maholly said:
Hi All.
I'm new to this and trying to install my first rom (aiming for cynagenmod 7- it has the language support i need, or so they say)
I rooted my phone and followed a yourtube video titled "How To Install CyanogenMod 7 Nightly on T-Mobile G2x after Nandroid Backup"
When i get to the part where i need to install zip from sd card, i can't find the file. I went back and copied the zip file into a few different folders, and although i can locate the folders, it tells me that the file cannot be found.
How do i get around this? Your help is much appreciated.
Click to expand...
Click to collapse
How did you download it? Through rom manager or from the phones xda app, browser? Look in folders with xda or rom manager?? Next time just copy and paste it to the root of the sdcard, not in a folder.
Sent from my LG-P999 using xda premium
Downloaded it on a computer and then copied it to sd card
and you can't find where you put it? did you place it in a certain folder already created... you can plug your phone in to pc then enter recovery mode, go to storage and mounts at the bottom select mount usb then copy the zip to your sdcard in no folders.
When i try to do that t tells me unable to write to ums lunfile (no such file or directory).
From recovery mode there are some folders i can't see when i browse the folders on the computer when the phone is booted up normally - and vice versa. Is this an indicaiton of a problem?
Silly question: do you actually have an SD card inserted in your phone? If so, what did you use to format it?
i do have an sd, and i actually didn't format it. should i format? if so, what is the best way?
Your help is much appreciated
Maholly said:
i do have an sd, and i actually didn't format it. should i format? if so, what is the best way?
Your help is much appreciated
Click to expand...
Click to collapse
Did you try, while in recovery, taking the back off your phone, pop out the sd card, wait 1 second, then pop it back in?
Stupid question, but it's a mistake some beginners make, but did you unzip it by any chance? That could be a reason CWM isn't seeing it. Once you DL the ROM you need to leave it untouched. Then place on SD.
After that in CWM go to choose zip from sd.
And you attained CWM via NVFlash correct?
buru898 said:
Did you try, while in recovery, taking the back off your phone, pop out the sd card, wait 1 second, then pop it back in?
Click to expand...
Click to collapse
Yes, tried that and still no luck
mackster248 said:
Stupid question, but it's a mistake some beginners make, but did you unzip it by any chance? That could be a reason CWM isn't seeing it. Once you DL the ROM you need to leave it untouched. Then place on SD.
After that in CWM go to choose zip from sd.
And you attained CWM via NVFlash correct?
Click to expand...
Click to collapse
no, didn't unzip, left it as cm_p999_full-201.zip
and yes, did get the CWM via NVFlash
Maybe you accidentally copied it to internal memory instead of the sdcard. You can check in cwm under internal sdcard I believe is what it is called.
When you connect the phone through USB it mounts both internal and the sdcard.
Sent from my LG-P999 using xda premium
My file explorer sees it in both the root and the folder I created in the root - both can't be seen in recovery mode.
Should i list the directories i see in both views?
In cwm are you selecting install zip from sdcard or install update from sdcard
Sent from my LG-P999 using xda premium
I ask it to install zip from sd and not update
Maholly said:
My file explorer sees it in both the root and the folder I created in the root - both can't be seen in recovery mode.
Should i list the directories i see in both views?
Click to expand...
Click to collapse
you may have put it on the "internal sd card" instead of external sd card, however this is not an issue if you flash CWM 5.0.2.0 or later, it has an option to install zip from internal sd and external. i renamed my external sd card to avoid future confusion (otherwise i see two "removable disks" when i plug my phone into my computer)
Check your file names on your SD card. Check what you see listed in Recovery. If you see differing file names, then you're accessing the wrong memory.
I'm going to assume you tried booting with the physical buttons. Try booting with CWM which should give you a blue menu.
i did try to boot both ways and both times i did not find it... for the millionth time i took the sd card out and put it back in and rebooted using cwm, and funny enough, it found the direcotry... and yaaaaaaaaaaaaaaay, cynagenmod7 is my new rom
thanks for all your help, support and commiseration... really, much appreciated. i do ve a few more issues that i have to research now... again, external sd not found though... will probably solicit more help
again, thanks
Facing the same problemm
Hello,
new to this rooting and stuff.. I rooted the rom , installed clockworkmod... Now the rom is just not getting detected... Did it a million times.. What to do.. facing exactly the same problems.. I did all that was mentioned... The file is unzipped only card is inserted, using the cmw reboot and stuff itself so no tension.. plzz let me no what to do... stuck here since hours.. !!
hippoalways said:
Hello,
new to this rooting and stuff.. I rooted the rom , installed clockworkmod... Now the rom is just not getting detected... Did it a million times.. What to do.. facing exactly the same problems.. I did all that was mentioned... The file is unzipped only card is inserted, using the cmw reboot and stuff itself so no tension.. plzz let me no what to do... stuck here since hours.. !!
Click to expand...
Click to collapse
Don't unzip the file. When you flash anything via clockwork, it flashes using .zip files.
Galaxy S2 GTi9100
Hi,
I rooted my phone today and am now trying to install Cyanogen Mod. I followed all steps on their Wiki but now am facing a problem.
- The wiki says "Place the CyanogenMod update.zip file on the root of the SD card. "
- I placed the update .zip file on the root of the external sd card. Seems like that was not what was intended.
- I followed these steps successfully:
Boot into the ClockworkMod Recovery.
Once the device boots into the ClockworkMod Recovery, use the side volume buttons to move around, and either the power button or the trackball to select.
Optional: Select backup and restore to create a backup of current installation on the Samsung Galaxy S II.
Select the option to Wipe data/factory reset.
Then select the option to Wipe cache partition.
Select Install zip from sdcard.
Select Choose zip from sdcard.- The next step is "Select the CyanogenMod update.zip. "
The problem is I don't see the CyanogenMod update .zip file anywhere in that list. Seems like I may have placed it in the wrong sd card?
When I try and reboot it just comes to the screen with the giant S and goes no further.
How can I resolve this problem?
Adding some more information after reading a few other threads.
- Looks like I placed the cyanogen mod update .zip file in the external sd and not the internal one (stupid!!).
Now I cannot get back inside the phone to try and place it in the internal sd.
How do I solve this?
Connect the phone to the PC and mount usb in recovery. You should see a storage device in windows & then just copy the files on it.
Ok. Just tried that. After I select 'mount usb storage', the next screen says on the top:
USB Mass Storage device
Leaving this menu unmount
your SD card from your PC
I then see an option to unmount.
On Windows explorer, I don't see the device.
Thinking back, I may have unchecked 'USB Debugging' before I started the process (for some reason that I cannot remember now). Would that cause a problem?
USB Debugging should not matter because you're in recovery.
I've not understand at well the question. You want flash the CM9 from clockwork mod? I've a Galaxy Gio, but in my case i have only to:
1 - copy the ROM in the root( after flash with manager of Android, with an SD adapter or in the other possible way)
2 - backup the old rom from cwm;
3 - reboot in cwm and if i have mount errors of /cache /data or some other partition i format it and mount it manually from cwm
4 - flash the zip i've copied at step 1
Then you have to wait and at the end, reboot.
What goes wrong in these steps for you ?
EDIT: If you don't see the .zip try to remove SD and use a SD Adapter, so you can copy files manually. Or if you want use CWM you can mount the device connecting device with USB cable, go in clockwork and do "mounts and storage -> mount USB storage" and copy files in the root "/"
You can use adb push command in recovery to push files to the phone.
You can also use fastboot to flash image files to the phone.
tonystark88 said:
I've not understand at well the question. You want flash the CM9 from clockwork mod? I've a Galaxy Gio, but in my case i have only to:
1 - copy the ROM in the root( after flash with manager of Android, with an SD adapter or in the other possible way)
2 - backup the old rom from cwm;
3 - reboot in cwm and if i have mount errors of /cache /data or some other partition i format it and mount it manually from cwm
4 - flash the zip i've copied at step 1
Then you have to wait and at the end, reboot.
What goes wrong in these steps for you ?
Click to expand...
Click to collapse
Step 1 went wrong
I copied the ROM in the external SD instead of internal sd. Now trying the adb option to push the ROM into the device root. Hoping that works.
aharol said:
Step 1 went wrong
I copied the ROM in the external SD instead of internal sd. Now trying the adb option to push the ROM into the device root. Hoping that works.
Click to expand...
Click to collapse
With my GIO i copied it in the root of External SD, not internal memory.Can you report link of the guide?
tonystark88 said:
With my GIO i copied it in the root of External SD, not internal memory.Can you report link of the guide?
Click to expand...
Click to collapse
Sorry, I'm unable to post the link but it is the cyanogenmod wiki
wiki(dot)cyanogenmod(dot)com(forward slash)wiki(forward slash)Samsung_Galaxy_S_II:_Full_Update_Guide
aharol said:
Sorry, I'm unable to post the link but it is the cyanogenmod wiki
wiki(dot)cyanogenmod(dot)com(forward slash)wiki(forward slash)Samsung_Galaxy_S_II:_Full_Update_Guide
Click to expand...
Click to collapse
This guide is same as my gio guide. The ROM goes in the root of external sd, not in internal memory. Try to reinstall CWM if you don't find the zip.
zerox981 said:
You can use adb push command in recovery to push files to the phone.
You can also use fastboot to flash image files to the phone.
Click to expand...
Click to collapse
Thank you my friend. This worked!
Little did I realise that this simple sounding statement above would require me to set up a complete android development environment on my computer.
I'm still not sure if all that was needed but I was finally able to get the files on my device by doing an adb push.
Lovely education for me today!
Glad it helped. Sorry I forgot to mention that ... it's kinda natural to me (having the sdk installed).
zerox981 said:
Glad it helped. Sorry I forgot to mention that ... it's kinda natural to me (having the sdk installed).
Click to expand...
Click to collapse
I am (or was at the time of this post) a complete noob with no programming qualifications but now I have gone through a crash course.
I now have my S2 running CM7.
(Now, I know this is not in the right section or even in the device's page, but...)
Forewarning: I am NOT responsible for any damages caused by running this tool. (You ran it, not me.) Also, do NOT use on the Thrive 7 or ANY of the Excites! The Thrive 7 has an entirely different bootloader/partition layout than the 10.
Pio_masaki and I have been working hard for almost a year to get root on the ICS version of the Toshiba Thrive 10.
Last night, I was able to finally sneak past sealime.ko and have it work.
It uses the "root any ICS device" tool, with special modifications specifically for the Thrive 10.
(can't post any links, so it's on the "thrive-hackers" github page.)
Special note: While it is set up for OSX ADB, I have not been able to find any binaries.
Are you saying that we are close to a root method for Thrives running Toshiba ICS?
rohads said:
Are you saying that we are close to a root method for Thrives running Toshiba ICS?
Click to expand...
Click to collapse
Saying there is a method to root it now, yes, we got around sealime.ko. This means we can flash the HC bootloader which is unlocked, which allows custom recovery and kernels/ramdisks (boot.img) to be used.
BTW the link is https://github.com/Thrive-Hackers
congrats guys ! very awesome work !
jdsingles deodexed ROM w/ agat63's 1.3 kernel Suped up w/ CB 6.26.13
More specifically, it bypasses sealime to flash the unlocked bootloader. What we did was we MVd /dev/block/mmcblk0p6 to 0p9. It's a pure fluke Pio and I found out that it works. We found out that sealime was explicitly blocking write to 0p6, so he semi-sarcastically said to move it. I ran the mv command, whadda ya know? It worked!
'Course, getting the tool completed wasn't as simple as that...
PS: Could we get this moved to the Toshiba Thrive Development section?
Have instructions been written for the process?
worked for me
I used this tool on Jul 8 and it worked very well. I got it from thriveforums dot org. Thank you pio_masaki and AmEv.
I tried changing the recovery to the latest TWRP using "fastboot flash recovery twrp-2.4.1.0.img" while in bootloader. I was not able to, though as it kept giving me errors.
Does this bootloader not allow flashing a recovery? I noticed the rootme script uses adb commands to push the CWM recovery.
I am now running Dale's latest deodexed rooted ICS rom with the CWM recovery he included.
Other unrelated lessons learned:
If you can't mount your SD card in recovery, try a different card!
And, Dale packages his update.zip inside the downloaded zip file!
navyguy said:
I used this tool on Jul 8 and it worked very well. I got it from thriveforums dot org. Thank you pio_masaki and AmEv.
I tried changing the recovery to the latest TWRP using "fastboot flash recovery twrp-2.4.1.0.img" while in bootloader. I was not able to, though as it kept giving me errors.
Does this bootloader not allow flashing a recovery? I noticed the rootme script uses adb commands to push the CWM recovery.
I am now running Dale's latest deodexed rooted ICS rom with the CWM recovery he included.
Other unrelated lessons learned:
If you can't mount your SD card in recovery, try a different card!
And, Dale packages his update.zip inside the downloaded zip file!
Click to expand...
Click to collapse
Try fastboot flash:raw.
Is there any need to do a backup before rooting?
TubaMeister said:
Is there any need to do a backup before rooting?
Click to expand...
Click to collapse
Not explicitly, but it wouln't hurt in case your tablet got into contact with allspark.... er, the bootloader didn't flash, and you're stuck in a bootloop.
easy root and CWM recovery
walk thru
http://www.youtube.com/watch?v=MXeYJhKCgX8
adb driver
http://www.thriveforums.org/forum/t...vers-usb-adb-driver-installation-package.html
root tool
https://github.com/thrive-hackers/thrive-10-inch-ics-root,
follow this to install CWM
http://www.thriveforums.org/forum/d...0-clockworkmod-touch-recovery-v6-0-1-1-a.html
follow to install touch CWM
http://www.thriveforums.org/forum/d...0-clockworkmod-touch-recovery-v6-0-1-1-a.html
ROMs
http://www.thriveforums.org/forum/dalepl/
Uh oh
robyn402 said:
walk thru
http://www.youtube.com/watch?v=MXeYJhKCgX8
adb driver
http://www.thriveforums.org/forum/t...vers-usb-adb-driver-installation-package.html
root tool
https://github.com/thrive-hackers/thrive-10-inch-ics-root,
follow this to install CWM
http://www.thriveforums.org/forum/d...0-clockworkmod-touch-recovery-v6-0-1-1-a.html
follow to install touch CWM
http://www.thriveforums.org/forum/d...0-clockworkmod-touch-recovery-v6-0-1-1-a.html
ROMs
http://www.thriveforums.org/forum/dalepl/
Click to expand...
Click to collapse
I installed the drivers, used the root tool, the restore was successful, but now the tablet is stuck in a boot-loop mode.
The root tool was running, there was a line that said the screen would go blank, which it did, and it stayed there for several hours. When I came back to check on it, the tablet was off, so I turned it on. That's when I found the boot loop. It'll get to the home page, tell me that nova launcher has stopped, then loop back to the moving stars section of the boot screen.
Any ideas on what to do now?
DLeach4512,
if CWM is still alive, so just flash any ROM via CWM (flashing wipes all your data that exist in internal memory, so you need to make backup via CWM if you wish to save your data; and after flashing ROM you can import all data via Titanium Backup)
Kyonex said:
DLeach4512,
if CWM is still alive, so just flash any ROM via CWM (flashing wipes all your data that exist in internal memory, so you need to make backup via CWM if you wish to save your data; and after flashing ROM you can import all data via Titanium Backup)
Click to expand...
Click to collapse
You know, I feel kinda dumb because I didn't even try that!
Now i've tried it, and I see I can get into CWM.
I put a ROM on an SD card on my PC, then put that SD card into the Thrive and used CWM to install the .zip of the ROM I selected, and it won't install. It starts, then it says Installation aborted, but won't tell me why.
Any ideas where I should start unraveling this mystery?
1. check that your recovery is CWM and not stock recovery
2. check that you put on SD archive that contain folders named system and META-INF, file like boot.img, something other maybe (many ROMs archive contain "archive in archive", so you need to unpack archive from main archive and than put that internal archive on SD); after checking that all right try to flash that archive again
3. try another sdcard (full sized SDHC + formated in FAT32)
DLeach4512 said:
You know, I feel kinda dumb because I didn't even try that!
Now i've tried it, and I see I can get into CWM.
I put a ROM on an SD card on my PC, then put that SD card into the Thrive and used CWM to install the .zip of the ROM I selected, and it won't install. It starts, then it says Installation aborted, but won't tell me why.
Any ideas where I should start unraveling this mystery?
Click to expand...
Click to collapse
also make sure you open the zip and place the update.zip on your card -
From my GSIII - jd's Stock/Rooted/Deodexed 4.3
Kyonex said:
1. check that your recovery is CWM and not stock recovery
2. check that you put on SD archive that contain folders named system and META-INF, file like boot.img, something other maybe (many ROMs archive contain "archive in archive", so you need to unpack archive from main archive and than put that internal archive on SD); after checking that all right try to flash that archive again
3. try another sdcard (full sized SDHC + formated in FAT32)
Click to expand...
Click to collapse
Excellent!
1) I had to extract "update.zip" from the ROM I had downloaded.
2) I re-formatted the card I was using to FAT32 instead of FAT.
3) I was able to get the install started with no trouble after following your directions.
BIG THANK YOU FOR THAT!
I got a successful install message, and then it booted!
Thanks a million!
Problems after Mount Changes
I changed the mount as described on thriveforums.org to allow apks and data to go to the external sd rather than "shared" internal memory.
I now have the situation with less free memory available on the sd card than on internal. The CWM backups went on the physical card- a 32 G one almost full. Will look for a major mfr 64 Gig.
One or so issues with the revised mounts where the external sd card is now internal. They relate to making backups with dalepl's latest CWM 6.0.1: where to put CWM backups for now and are they being made correctly with the revised mounts?
The backup made prior to the mount change looks normal: a single, dated/numbered folder about 2.6 Gb, 6 files: boot.img, cache.ext4.tar, data.ext4.tar, nandroid.md5, recovery.img and system.ext4.tar. However, the one made after the mount change also has a dated, numbered folder of only 15.8 Mb and 7 files: .android_secure.vfat.dup, boot.img, cache.ext4.dup, data.ext4.dup, nandroid.md5, recovery.img and system.ext4.dup. There is a second folder associated with the later bu called "blobs", which is huge --2.76 Gb, 3292 folders and 6581 files. Is this an expected result and any one think it might be a valid bu?
Also, it went on to the external SD (now "internal") and total storage use is now almost 28 Gb out of 30.2. I now have the situation with less free memory available on the sd card than on internal. The stuff there looks ok, pix movies and music plus CWM bups of 5.5 G and App_Backup_Restore archived apks at 2.8 Gb. So, I copied the cwm backups folder to the real internal memory, now sdcard2. I assume this true internal memory might get wiped during a restore so, this is not a valid storage site for this? And, if I put copies on a spare card, will that really work if my downloaded apps are on the original card, eg does the CWM backup copy the external card apps?
As I note, for some reason this 'blobs' folder won't copy easily to a USB via the Thrive or Win 7 pc. It also won't copy to a Win 7 HD partition where I store my Thrive stuff. (Update: I was able to do a wireless transfer to my pc and then, from there, to a spare SD card.)
Any thoughts? Should I go back and change the mounts to default?
BTW, I find FolderMount has no real use with the changed mount on the Thrive unless someone tells me otherwise. With the Thrive mounting the external card as internal, files go to the physical card.
gberpa,
I don't understand your question - it is very long. But I know that custom recovery (CWM / TWRP) itself remounts sdcard and internal memory before wipe process so it will wipe correct memory (only internal memory). If you need to change the ROM you don't need to worry about mounting paths because after wipe mounting paths will be restored to original.
Partition layout of Toshiba Thrive 10.1" ICS
AmEv said:
Also, do NOT use on the Thrive 7 or ANY of the Excites! The Thrive 7 has an entirely different bootloader/partition layout than the 10.
Click to expand...
Click to collapse
Can you give us information on the Toshiba Thrive 10.1" ICS partition layout and their names, please?
We would like to compare it to ours Toshiba Excite Pro (AT10LE-A, tostab12BA). A Dirty Cow enabled KingoRoot has given us a temporary root.
[Q] How Root Toshiba Excite Pro AT10LE-A-108 by dexxxZ
https://forum.xda-developers.com/showthread.php?t=2583677&page=6
Sent from my takee 1 using XDA Labs
Hi
How can i swap sdcard and extsdcard for i9105p.
I alrady tried tuterials for other phones on i9105p but it breaks the phone and it needs to flash stock 4.2.2 rom again (and root again).
Thanks in advance.
(Actually one friend of mine is working on issue and i'm just asking for him. But if someone put tuterial here i'll root and give it a try later )
vahid8910 said:
Hi
How can i swap sdcard and extsdcard for i9105p.
I alrady tried tuterials for other phones on i9105p but it breaks the phone and it needs to flash stock 4.2.2 rom again (and root again).
Thanks in advance.
(Actually one friend of mine is working on issue and i'm just asking for him. But if someone put tuterial here i'll root and give it a try later )
Click to expand...
Click to collapse
of course you break your phone with other phone's instructions
go to setting. storage. format sd card. then this format your external sd card.
go to setting. backup and reset. choose factory data reset and then your phone will be fresh with internal wiped. but also every setting on your phone wiped off
hit thanks if i helped u
Brian_SGW_CM9 said:
of course you break your phone with other phone's instructions
go to setting. storage. format sd card. then this format your external sd card.
go to setting. backup and reset. choose factory data reset and then your phone will be fresh with internal wiped. but also every setting on your phone wiped off
hit thanks if i helped u
Click to expand...
Click to collapse
Of course you didn't help because he didn't ask how to wipe. He asked how to swap internal memory and sdcard. I'm also looking for script or any-thing else that can do this.
I don't think you understood what I tried to say my freind.
By swap I meant replace extsdcard by sdcard so you can have more storage to install APS for example use a 32 gig micro SD as phone's SDcard partition.
It has to do something with vold.fstab file.
Like this tutorial
http://forum.xda-developers.com/showthread.php?t=1991583
And when I change it the phone won't boot and wiping partitions doesn't work cuz change was made by root access.
Does anyone have an idea how to restore original vold.fstab file without flashing ROM?cuz phone needs to be booted to restore it, but unfortunately it doesn't.
vahid8910 said:
Does anyone have an idea how to restore original vold.fstab file without flashing ROM?cuz phone needs to be booted to restore it, but unfortunately it doesn't.
Click to expand...
Click to collapse
I you have backup of original file, download aroma filemanager http://forum.xda-developers.com/showthread.php?t=1646108 go to cwm and install it. It will open file manager in recovery where you can restore original vold.fstab.
maelfilk said:
I you have backup of original file, download aroma filemanager http://forum.xda-developers.com/showthread.php?t=1646108 go to cwm and install it. It will open file manager in recovery where you can restore original vold.fstab.
Click to expand...
Click to collapse
Thank you
does it need root access?
For example Can I paste moded vold.fstab through this file manager on a nonrooted device then if it doesn't work try another one or just restore original vold.fstab and forget about it?
Cuz I do like mod my phone but I believe root is not an answer cuz I read somewhere it have some procceses before android boots which is not cool.
vahid8910 said:
Thank you
does it need root access?
For example Can I paste moded vold.fstab through this file manager on a nonrooted device then if it doesn't work try another one or just restore original vold.fstab and forget about it?
Cuz I do like mod my phone but I believe root is not an answer cuz I read somewhere it have some procceses before android boots which is not cool.
Click to expand...
Click to collapse
I think it should work without root, all you need is cwm recovery.
I would say it needs root access and it doesn't, how?
although you can make changes on a non-rooted device but ROM itself undoes your changes so it have no use for modifying system files like vold.fstab.
maelfilk said:
I think it should work without root, all you need is cwm recovery.
Click to expand...
Click to collapse
that file manager doesn't show etc folder containing as well as lots of other files.
Is it same on your phone?
vahid8910 said:
that file manager doesn't show etc folder containing as well as lots of other files.
Is it same on your phone?
Click to expand...
Click to collapse
Currently i don't have cwm recovery, but on my previous phone i succesfully used it (it was rooted).
maelfilk said:
Of course you didn't help because he didn't ask how to wipe. He asked how to swap internal memory and sdcard. I'm also looking for script or any-thing else that can do this.
Click to expand...
Click to collapse
dude i was just trying to help you don't really needa be so mean
i actually call that partition from extsdcard and make the system to detect that partition as one part of the internal storage
i once found a script like that but i lost the link
[Q] CWM Backup failed -> internal storage full - can't find&delete the corrupt files
Hey guys,
I have a big problem with my Tablet after a CWM Recovery failed: The internal storage is completely full and I am not able to find and delete the uncomplete backup-files.
That happens after t I tried to backup to the internal storage of my device. After a while the backup process failed (I think because of insufficent storage on the internal SD card for the backup file). Afterwards I used "backup-to-external-SD" and it works fine.
The problem is now, that after I started the tablet again it says "inssuficent storage on internal SD card" and I cant even install an 155kb app any more. => CWM didn't delete the files after the first backup process failed.
Usually I would be able to use my file explorer, choose the internal sd, look for the backup folder with the uncompleted files and delete it. But it doesn't work! The folders of my internal SD card don't contain the massive damaged files.
But when I go into Recovery and click on "Flash files from SD" I see the following folders:
- /0 -> contain all the sd card files
- /clockwordmod -> contains /backup/ with the damaged CWM files I want to delete but can't find with a file manager
- /legacy
- /obb
Click to expand...
Click to collapse
Does anyone know how I could be able to access the folder I can see in the Recovery so that I can delete the clockwordmod/backup/ folder?
I would really appreciate your help :highfive:
EDIT: I had a similar problem once and was able to solve it by formatting everything via CWM-Recovery, but I can't do it this time again because of a lot of important files and data.
EDIT2: I use CWM Recovery v6.0.2.7
internal sd card cwm backup
dubdidub said:
Hey guys,
I have a big problem with my Tablet after a CWM Recovery failed: The internal storage is completely full and I am not able to find and delete the uncomplete backup-files.
That happens after t I tried to backup to the internal storage of my device. After a while the backup process failed (I think because of insufficent storage on the internal SD card for the backup file). Afterwards I used "backup-to-external-SD" and it works fine.
The problem is now, that after I started the tablet again it says "inssuficent storage on internal SD card" and I cant even install an 155kb app any more. => CWM didn't delete the files after the first backup process failed.
Usually I would be able to use my file explorer, choose the internal sd, look for the backup folder with the uncompleted files and delete it. But it doesn't work! The folders of my internal SD card don't contain the massive damaged files.
But when I go into Recovery and click on "Flash files from SD" I see the following folders:
Does anyone know how I could be able to access the folder I can see in the Recovery so that I can delete the clockwordmod/backup/ folder?
I would really appreciate your help :highfive:
EDIT: I had a similar problem once and was able to solve it by formatting everything via CWM-Recovery, but I can't do it this time again because of a lot of important files and data.
EDIT2: I use CWM Recovery v6.0.2.7
Click to expand...
Click to collapse
You can find the file under data/media/0/clockworkmod/backup
You will need root access.
fredy66 said:
You can find the file under data/media/0/clockworkmod/backup
You will need root access.
Click to expand...
Click to collapse
Thanks for your help!!
The backup folder you mentioned is empty, but I found the files here:
/data/media/clockwordmod/backup
So the filesystem the Recovery shows me is in /data/media.
Edit: Without root access I only saw an empty folder (info for people with the same problem)
dubdidub said:
Thanks for your help!!
The backup folder you mentioned is empty, but I found the files here:
data/media/clockwordmod/backup
So the filesystem the Recovery shows me is in data/media
Click to expand...
Click to collapse
Sorry my mistake you are right ...