Related
Hi everyone, looking for a little guidance.
Phone: Android G1 (Rogers Canada Dream) running Cyanogen 4.2.15.1, been running fine since 4.2.6.1
Removed SD card while it was on and it rebooted... when it restarted it showed no applications and said the SD card was inaccessible and required a format. After rebooting a few times with no success I bit the bullet and formatted it... all apps are gone except for the ones that are on that image for Cyanogen. I have no market app to download new apps and when I plug it into my PC and mount it I don't see it show up as a drive like it did so I have no way to get the apps back on.
Has anyone had this happen before? Phone still works but I need to get it back to a state where I can get access to the SD and install the market... Any suggestions appreciated!!
There is a thread on the HERO section of Modaco site called "no adb, no sd". I think the 1st post on the last page MIGHT help. There are adb commands you can run to see if the phone has randomly stopped accessing the SD. Worth a shot.
PM me if you have trouble finding the thread n I'll have a look when I'm at my laptop.
Sent from my HTC Hero using XDA App
I misunderstood I think.
So it is now showing an sd present? Have you tried formatting in a pc?
Tried reboot without the sd in, then insert once fully booted again?
Sent from my HTC Hero using XDA App
I remove the SD Card, formatted it in my PC put it back in the phone and I can store pics and vids on it and access them but cant see or access it from the PC when in the phone. I also have no file browser so I cant install any apps or even access the market icon is gone).
D RoiD said:
Hi there! I had posted on the forum with the G1 issue where my SD card seemed to have died.
http://forum.xda-developers.com/showthread.php?t=738105
I have since removed the SD card and reformatted it, I can store pics and vids and replay them so the card is fine. I tried letting it boot up then adding the SD card when booted, that caused it to reboot, same issue...
Not having access to the card, I cant install any apps or browse the SD to install from there... really sucks
I'd be willing to blow it away and restart too and install CyanogenMod-5.0.8 but I need some guidance.
Click to expand...
Click to collapse
I got your message pal....
Ok,.... So pictures and videos taken with your phone camera DO save to your SD?.... and you CAN access them on your phone OR if you put your SD into your PC/Lappy?... But not when trying to "mount SD"?
Or have I got that completely wrong?.... Did you put pics&vids onto it through your PC, and thats the only access you get to it?
ddotpatel said:
I got your message pal....
Ok,.... So pictures and videos taken with your phone camera DO save to your SD?.... and you CAN access them on your phone OR if you put your SD into your PC/Lappy?... But not when trying to "mount SD"?
Or have I got that completely wrong?.... Did you put pics&vids onto it through your PC, and thats the only access you get to it?
Click to expand...
Click to collapse
Pics taken DO save to me SD. I Can access them from a PC is I remove the SD and put it in the PC. Not when I plug the phone in via USB then tell it to mount.
I just did a low level format, same issue.
UPDATE: Just tried the Android System Recovery and Toggle USB-MS and it shows on my laptop now! Going to try the recovery backup now.
aha,... so its just a mounting issue, not that the hardware has turned itself off.
Once when using an older ROM (maybe Villain 10?) we had this same issue, not able to mount SD,... going into Settings --> Connect to PC --> and turning off Notify/ask me solved the problem.
I just partitionned it using:
parted /dev/block/mmcblk0
print (to verfiy we know what size card we are dealing with, the details should be straight forward)
rm 1
rm 2
mkpartfs primary fat32 0 7500
mkpartfs primary ext2 7500 7948
quit
upgrade_fs
reboot recovery
Then put CyanogenMod-5 For Dream/Magic on the SD and renamed it update.zip
I'm in Android System recovery now and just did a nandroid backup.
I should be able to WIPE then FLASH UPDATE IMAGE right?
D RoiD said:
I just partitionned it using:
parted /dev/block/mmcblk0
print (to verfiy we know what size card we are dealing with, the details should be straight forward)
rm 1
rm 2
mkpartfs primary fat32 0 7500
mkpartfs primary ext2 7500 7948
quit
upgrade_fs
reboot recovery
Then put CyanogenMod-5 For Dream/Magic on the SD and renamed it update.zip
I'm in Android System recovery now and just did a nandroid backup.
I should be able to WIPE then FLASH UPDATE IMAGE right?
Click to expand...
Click to collapse
Yes, if you have the ROM image on the SD Card (FAT32 partition), you can go flash the image.
akapoor said:
Yes, if you have the ROM image on the SD Card (FAT32 partition), you can go flash the image.
Click to expand...
Click to collapse
Stupid question but when I wipe will it delete my contacts as well?
I assume yes but...
D RoiD said:
Stupid question but when I wipe will it delete my contacts as well?
I assume yes but...
Click to expand...
Click to collapse
If your contacts are saved in the phone's memory, then yes. Any settings, apps, configurations that are stored on the phone will all be gone.
A wipe pretty much gives you the factory settings. (As if you just bought the phone) So you'll have to re-signin into your Google Account and let the Contacts Sync, etc..
EDIT: Depending on what you are flashing (flashing and wiping are two different things), you may not even need to wipe.
Hmmm I tried flash update image and got:
E: Cant open /sdcard/update.zip (No such file or directory)
When I mount it in system recovery I see the LOST.DIR and update.zip
D RoiD said:
Hmmm I tried flash update image and got:
E: Cant open /sdcard/update.zip (No such file or directory)
When I mount it in system recovery I see the LOST.DIR and update.zip
Click to expand...
Click to collapse
Try this:
-Confirm the Image-
1) Make sure you have the full image you are going to flash. (Compare MD5 Hashes and/or just redownload the image)
2) Make sure the image you are flashing is the in the ROOT directory of your SDCard. In other words, it shouldn't be in any folder.
-Flash the Image-
1) When in Recovery, choose to flash an image.
2) Depending on what recovery you have, you may have to select/find the Image you want to flash.
3) Flash the image
-Wipe (Depends)-
1) If you are coming from a different ROM base (ie anything -> cyan), you'll want to wipe.
2) After the phone successfully flashes the image, wipe the phone.
Reboot.
Let me know how it goes.
I pulled the new image from: Latest version: 5.0.8-DS - 06/19/2010
Download: http://cyanogen-upda...8-DS-signed.zip
but it says no such file or DIR... weird...
The only partition I can see on my PC to put it on is the main partition...
I just downloaded the file and renamed it update.zip
D RoiD said:
I pulled the new image from: Latest version: 5.0.8-DS - 06/19/2010
Download: http://cyanogen-upda...8-DS-signed.zip
but it says no such file or DIR... weird...
The only partition I can see on my PC to put it on is the main partition...
I just downloaded the file and renamed it update.zip
Click to expand...
Click to collapse
I just realized the main reason that you posted this topic. From what I am assuming, either:
a) Your SD Card reader is dead
b) The software isn't recognizing the SD Card reader.
Best bet at this point is to setup ADB (ADB For Dummies) and flash the image from your computer. It can get a slight bit complicated, but just slowly go through each step for installing ADB.
Once ADB is set up, you can flash the image from the computer.
akapoor said:
I just realized the main reason that you posted this topic. From what I am assuming, either:
a) Your SD Card reader is dead
b) The software isn't recognizing the SD Card reader.
Best bet at this point is to setup ADB (ADB For Dummies) and flash the image from your computer. It can get a slight bit complicated, but just slowly go through each step for installing ADB.
Once ADB is set up, you can flash the image from the computer.
Click to expand...
Click to collapse
The SD card reader in my phone? It has to work if I can read an write to it ( tested photos and videos) and in recovery I was able to make a backup.
If its the software I need to flash it then right? ADB does make me nervous as I only used it once... I just tried using the terminal emulator on the phone to flash a recovery image I had made while back:
cd /sdcard
flash_image recovery /sdcard/recovery-backup.img
and got the message "error writing recovery: Permission denied"
D RoiD said:
If its the software I need to flash it then right? ADB does make me nervous as I only used it once... I just tried using the terminal emulator on the phone to flash a recovery image I had made while back:
cd /sdcard
flash_image recovery /sdcard/recovery-backup.img
and got the message "error writing recovery: Permission denied"
Click to expand...
Click to collapse
If you can view the pictures that you saved on the SD card from the phone, then both the software and hardware are functioning correctly.
Regarding the permission denied:
1) What happens if you "su - " in terminal?
2) First try one(1) ^ and then try to reinstate the permissions. (In recovery, go to console and type : fix_permissions)
Not sure otherwise.
akapoor said:
If you can view the pictures that you saved on the SD card from the phone, then both the software and hardware are functioning correctly.
Regarding the permission denied:
1) What happens if you "su - " in terminal?
2) First try one(1) ^ and then try to reinstate the permissions. (In recovery, go to console and type : fix_permissions)
Not sure otherwise.
Click to expand...
Click to collapse
Ok I did a wipe and now I see the SD when mounted on the PC with the phone on.
I have my market icon back so I can reinstall my crap.
I'll leave it as is for a bit but appreciate everyones input!!!
As Undeads thread has been closed, I needed to start again.
Basically when flashing the new 5.0.2.7 recovery with any method, via Rom Manager or ADB Fastboot the recovery just doesn't work proper.
My sdcard can't mount, hence I can't navigate nor install any roms?
Performing backups & restores don't work for me either.
I've had to roll back to 4.0.0.9, annoying because I want to try out Blues Bulletproof.
Please someone what is the definitve solution to getting the officion CWM recovery to work as I'd expect.
I've even tried a :
fastboot erase system -w
before fastboot flash recovery 'recoveryimage'.img
Rolling back to 4.0.0.9 allows me to do everything as per usual in recovery, but not with 5.0.2.7
I'm really quite baffled with this
1 - Download the recovery via real computer.
2 - Plug in your doubleshot, transfer to sdcard main directory.
3 - Disconnect from computer, use a root file manager (root explorer preferred) to copy the image from /sdcard to /data/local
4 - Open up terminal emulator.
5 - Type:
Code:
su
6 - Then type:
Code:
dd if=/data/local/recovery-clockwork-5.0.2.7-doubleshot.img of=/dev/block/mmcblk0p21
*Make sure all letters are lowercase. You will have to juggle the hardware/software keyboard to get the first "i" after "dd" to be lowercase. Try typing a few characters past it, then using the trackpad to move the cursor back to it. Keep trying the hardware and software keyboards until it sticks as a lowercase "i"
7 - Let it transfer, then exit terminal emulator.
8 - Reboot into recovery, should be good.
**Note - pay close attention to the file name for the image. What Undeadk9 typed into his guide is wrong, what I typed here is correct.
Post if you have any further issues.
Edit:
"if" stands for "input file".
"of" stands for "output file".
dd
One thing I love about the official clockwork recovery is the ability to mount the sdcard while plugged into the computer, and drag and drop files to and from the sdcard while the doubleshot is in recovery mode.
Good luck, hope to see it working for you soon.
Thanks, but still same issues
Hi Blue,
I'm still getting the same errors dude.
I just tried your method, hence I've now tried to install the new recovery with all 3 methods (adb fastboot, rom mamanger and this dd terminal command.)
They all flash/install correct, and when rebooting into recovery each time it looks fine.
But when I try to navigate to 'sdcard' (install zip from sd card/choose zip from sd card... i get "E: Cant't mount /sdcard/"
When I go to mounts & storage/mount sdcard, again I get "Error mounting /sdcard!"
When I attempt a backup, I get this "Can't mount backup path."
I hope you can decipher my mayhem here...... very weird!
Maybe it's my sdcard - however, it works as perfect on modaco 4.0.0.9, I'm unsure on whats going on here
Blue6IX said:
1 - Download the recovery via real computer.
2 - Plug in your doubleshot, transfer to sdcard main directory.
3 - Disconnect from computer, use a root file manager (root explorer preferred) to copy the image from /sdcard to /data/local
4 - Open up terminal emulator.
5 - Type:
Code:
su
6 - Then type:
Code:
dd if=/data/local/recovery-clockwork-5.0.2.7-doubleshot.img of=/dev/block/mmcblk0p21
*Make sure all letters are lowercase. You will have to juggle the hardware/software keyboard to get the first "i" after "dd" to be lowercase. Try typing a few characters past it, then using the trackpad to move the cursor back to it. Keep trying the hardware and software keyboards until it sticks as a lowercase "i"
7 - Let it transfer, then exit terminal emulator.
8 - Reboot into recovery, should be good.
**Note - pay close attention to the file name for the image. What Undeadk9 typed into his guide is wrong, what I typed here is correct.
Post if you have any further issues.
Edit:
"if" stands for "input file".
"of" stands for "output file".
dd
One thing I love about the official clockwork recovery is the ability to mount the sdcard while plugged into the computer, and drag and drop files to and from the sdcard while the doubleshot is in recovery mode.
Good luck, hope to see it working for you soon.
Click to expand...
Click to collapse
I had similar problem, was something stupid. Think usb was still mounted or something. Not plugged into pc, right?
Sent from my RubiX CubeD MT4GS using Tapatalk
if you are using an older version of a rom you have to mount system and data.
Try mounting those and then trying to install from an sd.
If I were you I would do a full wipe /formatsystem/data/dalivk/sdcard. Backup the important things on the sd card to the computer and start fresh with an updated rom and a clean sd card.
You could always try swaping your sd card out but i dont think its the problem. The older roms make running the NEW CWM much more difficult than it should be.
I am not sure it appears you are trying to get an older ROM to run with the new CWM.
dillalade said:
Installed new recovery through rom manager, to 5.0.2.7 and rebooted into recovery.
All seems well.
BUTTTTTTTT when i tried to do a backup of my current virtuous rom i get an error: "can't mount target path"
And then when testing the restore i get an error: "can't mount path /sdcard"
And when testing the wipe & format options, instead of the traditional Yes or No.... I now have like 10 No options and 1 Yes option.
Something seems bogus, ive reinstalled the recovery twice but same effect.
Anyone??
Whats happened to my recovery guys???
Sent from my myTouch_4G_Slide using XDA App
Click to expand...
Click to collapse
dillalade said:
I went back to 4.0.0.9 and I can backup/restore again.
Something with the latest recovery doesn't allow my device to mount and see/work with my sd card..... any advice people?
Where can i get the img file so i can try to flash after a fastboot erase wype.... However i dont see how everyone else has it working and mine mashed.
Click to expand...
Click to collapse
pmcqueen said:
so am I the only one who literally can't get this recovery to work at all? perhaps I should contact koush and get him a log... basically, it won't mount my SD card. sd card is not defective as I can mount it fine through modaco recovery without any issues.
I guess I could try formatting the card and then trying the official CWM recovery again, but until then I'm just sticking with the modaco version.
Click to expand...
Click to collapse
pmcqueen said:
No one with sd mounting issues yet? I'm surprised. I think I know what the problem is though... will update shortly.
Click to expand...
Click to collapse
Conlculsion...?
I'm sure I saw it around here somewhere, hell if I know where off the top of my head. I am pretty sure it involved formatting the sd-card if memory serves right.
I have to go, will be on the road for a bit then tied up with the family of my Lady for a bit, so not sure when I can check back in.
Hopefully pmcqueen happens to see this and posts the missing info that was not updated...
I realize I quoted you from the other thread, so this issue has been hanging for you for a while? We need to figure out how to solve it - wish I could be more focused on your problem at the moment.
Try formatting your sdcard through Clockworkmod.
If you can't try powering off the phone and formatting the card directly in your computer.
It sounds like you have Clockworkmod successfully updated to the 5.0.2.7 version, but now reading the sdcard is the problem.
Can you try a different MicroSD card, do you have another one?
What ROM are you using? Becaause anything that dates before the official ROM.manager release date was unmounted. Basically there was a feature that the new ROM doesn't have. Undeadk9 confimed this in that thread. Everything you need to know is there. They go into full detail as to why it wasn't working. Even decided to open a full wiki about why. Did you even read it?
Basically you have to manually mount. Also in the rom try scrollong down and keep going until it unlocks.
Sent from my mt4gs
Not sure if you already tried this, but if you haven't, try doing:
Get the SD Formatter here and format your sd card (use a card reader if necessary).
Use quick format, but make sure "Format Size Adjustment" was off (all available under options...)
Two reminders:
1. The recommended filesystem for an android SD Card is FAT32
2. Remember to back up whatever you have in the SD card so you can put them back in once you're done formatting
Thanks for all the input guys.
Will try an sd format etc and report back soon.
Cheers
Sent from my Bulletproof_Doubleshot using XDA App
dillalade said:
Thanks for all the input guys.
Will try an sd format etc and report back soon.
Cheers
Sent from my Bulletproof_Doubleshot using XDA App
Click to expand...
Click to collapse
I can almost guarantee you formatting the sd will fix your problems with sd mounting in 5.0.2.7
You won't be able to do it via cwm recovery (it's not able to even recognize the sd, that's why you're having mounting issues) but if you put the card into an sd reader and format it for a normal fat32 partition I bet that fixes it.
So I just thought I'd chime in here...
I recently updated from Modaco to CWM and had this sd card issue however, I have like 10 different sd cards and the first thing I did was put the ROM I was trying to install on a sd card with nothing on it and BAM it worked. I'm going to try and put my 16gig back in after everything settles in the rom and I'll update with the results. tomorrow.
Hi guys,
similar issue here
I can't make a backup or restore, I can't install somethink because I always get "Can't mount sdcard"
any idea?
thanks
Oh damn I completly forgot to post my results.
Sd card needed a reformat, then the new recovery was able to mount sd etc.
Thanks to everyones 2cents in this thread, helped me out.
Enjoy
I've tried to format but without result
Did you try SD Formatter using a PC? I was able to resurrect a dead 16gb microSD using that method.
Sent from my RubiX CubeD Extreme MT4GS using XDA App
1) Download CWM recovery from the main site.
2) Connect your phone to your PC.
3) Open your PC's Terminal.
4) Type "adb shell reboot bootloader".
5) Type "fastboot flash recovery name-of-recovery.img".
6) Type "fastboot reboot".
Sent via smoke signal.
blackknightavalon said:
1) Download CWM recovery from the main site.
2) Connect your phone to your PC.
3) Open your PC's Terminal.
4) Type "adb shell reboot bootloader".
5) Type "fastboot flash recovery name-of-recovery.img".
6) Type "fastboot reboot".
Sent via smoke signal.
Click to expand...
Click to collapse
This works for me.
Boot into recovery 5.0.2.7 and make backup. All good.
Hi All.
I'm new to this and trying to install my first rom (aiming for cynagenmod 7- it has the language support i need, or so they say)
I rooted my phone and followed a yourtube video titled "How To Install CyanogenMod 7 Nightly on T-Mobile G2x after Nandroid Backup"
When i get to the part where i need to install zip from sd card, i can't find the file. I went back and copied the zip file into a few different folders, and although i can locate the folders, it tells me that the file cannot be found.
How do i get around this? Your help is much appreciated.
Maholly said:
Hi All.
I'm new to this and trying to install my first rom (aiming for cynagenmod 7- it has the language support i need, or so they say)
I rooted my phone and followed a yourtube video titled "How To Install CyanogenMod 7 Nightly on T-Mobile G2x after Nandroid Backup"
When i get to the part where i need to install zip from sd card, i can't find the file. I went back and copied the zip file into a few different folders, and although i can locate the folders, it tells me that the file cannot be found.
How do i get around this? Your help is much appreciated.
Click to expand...
Click to collapse
How did you download it? Through rom manager or from the phones xda app, browser? Look in folders with xda or rom manager?? Next time just copy and paste it to the root of the sdcard, not in a folder.
Sent from my LG-P999 using xda premium
Downloaded it on a computer and then copied it to sd card
and you can't find where you put it? did you place it in a certain folder already created... you can plug your phone in to pc then enter recovery mode, go to storage and mounts at the bottom select mount usb then copy the zip to your sdcard in no folders.
When i try to do that t tells me unable to write to ums lunfile (no such file or directory).
From recovery mode there are some folders i can't see when i browse the folders on the computer when the phone is booted up normally - and vice versa. Is this an indicaiton of a problem?
Silly question: do you actually have an SD card inserted in your phone? If so, what did you use to format it?
i do have an sd, and i actually didn't format it. should i format? if so, what is the best way?
Your help is much appreciated
Maholly said:
i do have an sd, and i actually didn't format it. should i format? if so, what is the best way?
Your help is much appreciated
Click to expand...
Click to collapse
Did you try, while in recovery, taking the back off your phone, pop out the sd card, wait 1 second, then pop it back in?
Stupid question, but it's a mistake some beginners make, but did you unzip it by any chance? That could be a reason CWM isn't seeing it. Once you DL the ROM you need to leave it untouched. Then place on SD.
After that in CWM go to choose zip from sd.
And you attained CWM via NVFlash correct?
buru898 said:
Did you try, while in recovery, taking the back off your phone, pop out the sd card, wait 1 second, then pop it back in?
Click to expand...
Click to collapse
Yes, tried that and still no luck
mackster248 said:
Stupid question, but it's a mistake some beginners make, but did you unzip it by any chance? That could be a reason CWM isn't seeing it. Once you DL the ROM you need to leave it untouched. Then place on SD.
After that in CWM go to choose zip from sd.
And you attained CWM via NVFlash correct?
Click to expand...
Click to collapse
no, didn't unzip, left it as cm_p999_full-201.zip
and yes, did get the CWM via NVFlash
Maybe you accidentally copied it to internal memory instead of the sdcard. You can check in cwm under internal sdcard I believe is what it is called.
When you connect the phone through USB it mounts both internal and the sdcard.
Sent from my LG-P999 using xda premium
My file explorer sees it in both the root and the folder I created in the root - both can't be seen in recovery mode.
Should i list the directories i see in both views?
In cwm are you selecting install zip from sdcard or install update from sdcard
Sent from my LG-P999 using xda premium
I ask it to install zip from sd and not update
Maholly said:
My file explorer sees it in both the root and the folder I created in the root - both can't be seen in recovery mode.
Should i list the directories i see in both views?
Click to expand...
Click to collapse
you may have put it on the "internal sd card" instead of external sd card, however this is not an issue if you flash CWM 5.0.2.0 or later, it has an option to install zip from internal sd and external. i renamed my external sd card to avoid future confusion (otherwise i see two "removable disks" when i plug my phone into my computer)
Check your file names on your SD card. Check what you see listed in Recovery. If you see differing file names, then you're accessing the wrong memory.
I'm going to assume you tried booting with the physical buttons. Try booting with CWM which should give you a blue menu.
i did try to boot both ways and both times i did not find it... for the millionth time i took the sd card out and put it back in and rebooted using cwm, and funny enough, it found the direcotry... and yaaaaaaaaaaaaaaay, cynagenmod7 is my new rom
thanks for all your help, support and commiseration... really, much appreciated. i do ve a few more issues that i have to research now... again, external sd not found though... will probably solicit more help
again, thanks
Facing the same problemm
Hello,
new to this rooting and stuff.. I rooted the rom , installed clockworkmod... Now the rom is just not getting detected... Did it a million times.. What to do.. facing exactly the same problems.. I did all that was mentioned... The file is unzipped only card is inserted, using the cmw reboot and stuff itself so no tension.. plzz let me no what to do... stuck here since hours.. !!
hippoalways said:
Hello,
new to this rooting and stuff.. I rooted the rom , installed clockworkmod... Now the rom is just not getting detected... Did it a million times.. What to do.. facing exactly the same problems.. I did all that was mentioned... The file is unzipped only card is inserted, using the cmw reboot and stuff itself so no tension.. plzz let me no what to do... stuck here since hours.. !!
Click to expand...
Click to collapse
Don't unzip the file. When you flash anything via clockwork, it flashes using .zip files.
Hi everyone,
I have a Galaxy Tab 2 7.0 (P3100) and I have rooted it and installed CWM so I could install the latest CM release. But when I try to install the CM zip file, it says "some symlinks failed". Now my tablet won't boot, the splash screen with "Samsung Galaxy Tab 2" keeps on forever. But I still have access to CWM and the Download mode so I think everything's not lost yet
Here are the exact steps I did:
- Uploaded the CM image (cm-10-20121213-NIGHTLY-p3100.zip), the gapps zip and the root zip to the tablet.
- Installed heimdall on my computer, with the correct drivers.
- Flashed CWM on the tablet.
- Installed the root zip on the tablet using CWM.
- Booted the tablet again just to make sure rooting was enabled (yes, it was).
- Opened CWM again, wiped data, wiped cache.
- Installed CM image:
--- Error: some symlinks failed (status 7)
- Installed the gapps zip file (worked)
- Formatted /system
- Installed CM image:
--- Same error: some symlinks failed (status 7)
I wanted to try another CM images, maybe that one is broken, I don't know, but now I cannot upload more files to the tabled internal SD card. I can't mount it anymore on my computer because the tablet won't boot. I tried using an external SD card (from another Android phone I have) but CWM says "Cannot mount /external_sd" when I try to mount it.
Can anyone help me? I want to flash the latest CM on my tablet.
Thanks!
This seems to me like either a broken recovery or maybe a corrupt download. What version of CM are you trying to flash? Also, what version of CWM are you using and where did you find it?
Posted from my Fascinate using XDA Premium
Yeah, I also think the download was corrupt. I tried flashing cm-10-20121213-NIGHTLY-p3100.zip (the latest one on the day I flashed) and my CWM version is 6.0.1.1. I downloaded it from ClockworkMod official website, they say that is the latest version for my tablet model.
I believe CWM is working and that the image is corrupt, but I can't find a way to flash another CM image because I don't know how to put another file inside the tablet, or how to flash an image from my computer to the tablet. Can I use something like heimdall to flash a CM to my tablet? Can I upload an image to the tablet so I can use CWM to install it? "adb push" doesn't work, it doesn't detect my device in CWM mode. Do I need some working/stock Android image on the tablet so I can flash CM over? Or it will work no matter what's installed (given that the download is not corrupt)?
Thanks!
cristiandeives said:
Yeah, I also think the download was corrupt. I tried flashing cm-10-20121213-NIGHTLY-p3100.zip (the latest one on the day I flashed) and my CWM version is 6.0.1.1. I downloaded it from ClockworkMod official website, they say that is the latest version for my tablet model.
I believe CWM is working and that the image is corrupt, but I can't find a way to flash another CM image because I don't know how to put another file inside the tablet, or how to flash an image from my computer to the tablet. Can I use something like heimdall to flash a CM to my tablet? Can I upload an image to the tablet so I can use CWM to install it? "adb push" doesn't work, it doesn't detect my device in CWM mode. Do I need some working/stock Android image on the tablet so I can flash CM over? Or it will work no matter what's installed (given that the download is not corrupt)?
Thanks!
Click to expand...
Click to collapse
Please tell me you made a backup after rooting and before modding?
If you didn't (which it sounds like), BAD CRISTIAN!!! But this will make you learn to do it from now on, huh?
Which leaves you only two options, both include using a computer to get a ROM zip to the tab...
1- connect tab to computer in recovery with usb cable and download a new copy to SD card via computer.
2 - remove SD card from tab, place in computer card reader, and download a new copy to SD card via computer.
LeftyGR said:
Please tell me you made a backup after rooting and before modding?
If you didn't (which it sounds like), BAD CRISTIAN!!! But this will make you learn to do it from now on, huh?
Click to expand...
Click to collapse
I didn't make a backup :crying:
Yes, now I learnt, I will always make a backup from now on...
LeftyGR said:
1- connect tab to computer in recovery with usb cable and download a new copy to SD card via computer.
Click to expand...
Click to collapse
How exactly do I download a new copy of the image to the SD card? When I plug the tablet to the computer, I can't access its files. It used to show me the files when the Android system booted, but on Recovery mode it won't display them, the filesystem isn't mounted. Should I do anything special? Should I use another CWM version?
LeftyGR said:
2 - remove SD card from tab, place in computer card reader, and download a new copy to SD card via computer.
Click to expand...
Click to collapse
I tried that, but it seems I cannot mount the external SD card using CWM. When I hit "Mount external SD Card", it says "Cannot mount /external_sd". The SD card works fine though, I use it on another phone and on my computer... Is this a CWM problem? =/
Thanks!
cristiandeives said:
I didn't make a backup :crying:
Yes, now I learnt, I will always make a backup from now on...
Click to expand...
Click to collapse
Good man.
How exactly do I download a new copy of the image to the SD card? When I plug the tablet to the computer, I can't access its files. It used to show me the files when the Android system booted, but on Recovery mode it won't display them, the filesystem isn't mounted. Should I do anything special? Should I use another CWM version?
Click to expand...
Click to collapse
Pull the ext sd card out of the tab and put it into a card reader on a computer using the adapter the micro sd card [should have] come with.
I tried that, but it seems I cannot mount the external SD card using CWM. When I hit "Mount external SD Card", it says "Cannot mount /external_sd". The SD card works fine though, I use it on another phone and on my computer... Is this a CWM problem? =/
Click to expand...
Click to collapse
Possibly... However if you can mount your internal sd card, you should be able to place the zip on there. I don't usually suggest using internal, but if that's what you gotta do....
I found out why I couldn't mount my external SD card with CWM: I had to format it with FAT32! I don't know what filesystem there was before, the SD card I have was used by an old Éclair phone. I still couldn't install others CM 10 images (I really don't know why), but I managed to install CM 9 and the brand new CM 10.1.
Thanks, guys! =)
cristiandeives said:
I found out why I couldn't mount my external SD card with CWM: I had to format it with FAT32! I don't know what filesystem there was before, the SD card I have was used by an old Éclair phone. I still couldn't install others CM 10 images (I really don't know why), but I managed to install CM 9 and the brand new CM 10.1.
Thanks, guys! =)
Click to expand...
Click to collapse
Awsome. Thank you for providing your solution!!
(Now, I know this is not in the right section or even in the device's page, but...)
Forewarning: I am NOT responsible for any damages caused by running this tool. (You ran it, not me.) Also, do NOT use on the Thrive 7 or ANY of the Excites! The Thrive 7 has an entirely different bootloader/partition layout than the 10.
Pio_masaki and I have been working hard for almost a year to get root on the ICS version of the Toshiba Thrive 10.
Last night, I was able to finally sneak past sealime.ko and have it work.
It uses the "root any ICS device" tool, with special modifications specifically for the Thrive 10.
(can't post any links, so it's on the "thrive-hackers" github page.)
Special note: While it is set up for OSX ADB, I have not been able to find any binaries.
Are you saying that we are close to a root method for Thrives running Toshiba ICS?
rohads said:
Are you saying that we are close to a root method for Thrives running Toshiba ICS?
Click to expand...
Click to collapse
Saying there is a method to root it now, yes, we got around sealime.ko. This means we can flash the HC bootloader which is unlocked, which allows custom recovery and kernels/ramdisks (boot.img) to be used.
BTW the link is https://github.com/Thrive-Hackers
congrats guys ! very awesome work !
jdsingles deodexed ROM w/ agat63's 1.3 kernel Suped up w/ CB 6.26.13
More specifically, it bypasses sealime to flash the unlocked bootloader. What we did was we MVd /dev/block/mmcblk0p6 to 0p9. It's a pure fluke Pio and I found out that it works. We found out that sealime was explicitly blocking write to 0p6, so he semi-sarcastically said to move it. I ran the mv command, whadda ya know? It worked!
'Course, getting the tool completed wasn't as simple as that...
PS: Could we get this moved to the Toshiba Thrive Development section?
Have instructions been written for the process?
worked for me
I used this tool on Jul 8 and it worked very well. I got it from thriveforums dot org. Thank you pio_masaki and AmEv.
I tried changing the recovery to the latest TWRP using "fastboot flash recovery twrp-2.4.1.0.img" while in bootloader. I was not able to, though as it kept giving me errors.
Does this bootloader not allow flashing a recovery? I noticed the rootme script uses adb commands to push the CWM recovery.
I am now running Dale's latest deodexed rooted ICS rom with the CWM recovery he included.
Other unrelated lessons learned:
If you can't mount your SD card in recovery, try a different card!
And, Dale packages his update.zip inside the downloaded zip file!
navyguy said:
I used this tool on Jul 8 and it worked very well. I got it from thriveforums dot org. Thank you pio_masaki and AmEv.
I tried changing the recovery to the latest TWRP using "fastboot flash recovery twrp-2.4.1.0.img" while in bootloader. I was not able to, though as it kept giving me errors.
Does this bootloader not allow flashing a recovery? I noticed the rootme script uses adb commands to push the CWM recovery.
I am now running Dale's latest deodexed rooted ICS rom with the CWM recovery he included.
Other unrelated lessons learned:
If you can't mount your SD card in recovery, try a different card!
And, Dale packages his update.zip inside the downloaded zip file!
Click to expand...
Click to collapse
Try fastboot flash:raw.
Is there any need to do a backup before rooting?
TubaMeister said:
Is there any need to do a backup before rooting?
Click to expand...
Click to collapse
Not explicitly, but it wouln't hurt in case your tablet got into contact with allspark.... er, the bootloader didn't flash, and you're stuck in a bootloop.
easy root and CWM recovery
walk thru
http://www.youtube.com/watch?v=MXeYJhKCgX8
adb driver
http://www.thriveforums.org/forum/t...vers-usb-adb-driver-installation-package.html
root tool
https://github.com/thrive-hackers/thrive-10-inch-ics-root,
follow this to install CWM
http://www.thriveforums.org/forum/d...0-clockworkmod-touch-recovery-v6-0-1-1-a.html
follow to install touch CWM
http://www.thriveforums.org/forum/d...0-clockworkmod-touch-recovery-v6-0-1-1-a.html
ROMs
http://www.thriveforums.org/forum/dalepl/
Uh oh
robyn402 said:
walk thru
http://www.youtube.com/watch?v=MXeYJhKCgX8
adb driver
http://www.thriveforums.org/forum/t...vers-usb-adb-driver-installation-package.html
root tool
https://github.com/thrive-hackers/thrive-10-inch-ics-root,
follow this to install CWM
http://www.thriveforums.org/forum/d...0-clockworkmod-touch-recovery-v6-0-1-1-a.html
follow to install touch CWM
http://www.thriveforums.org/forum/d...0-clockworkmod-touch-recovery-v6-0-1-1-a.html
ROMs
http://www.thriveforums.org/forum/dalepl/
Click to expand...
Click to collapse
I installed the drivers, used the root tool, the restore was successful, but now the tablet is stuck in a boot-loop mode.
The root tool was running, there was a line that said the screen would go blank, which it did, and it stayed there for several hours. When I came back to check on it, the tablet was off, so I turned it on. That's when I found the boot loop. It'll get to the home page, tell me that nova launcher has stopped, then loop back to the moving stars section of the boot screen.
Any ideas on what to do now?
DLeach4512,
if CWM is still alive, so just flash any ROM via CWM (flashing wipes all your data that exist in internal memory, so you need to make backup via CWM if you wish to save your data; and after flashing ROM you can import all data via Titanium Backup)
Kyonex said:
DLeach4512,
if CWM is still alive, so just flash any ROM via CWM (flashing wipes all your data that exist in internal memory, so you need to make backup via CWM if you wish to save your data; and after flashing ROM you can import all data via Titanium Backup)
Click to expand...
Click to collapse
You know, I feel kinda dumb because I didn't even try that!
Now i've tried it, and I see I can get into CWM.
I put a ROM on an SD card on my PC, then put that SD card into the Thrive and used CWM to install the .zip of the ROM I selected, and it won't install. It starts, then it says Installation aborted, but won't tell me why.
Any ideas where I should start unraveling this mystery?
1. check that your recovery is CWM and not stock recovery
2. check that you put on SD archive that contain folders named system and META-INF, file like boot.img, something other maybe (many ROMs archive contain "archive in archive", so you need to unpack archive from main archive and than put that internal archive on SD); after checking that all right try to flash that archive again
3. try another sdcard (full sized SDHC + formated in FAT32)
DLeach4512 said:
You know, I feel kinda dumb because I didn't even try that!
Now i've tried it, and I see I can get into CWM.
I put a ROM on an SD card on my PC, then put that SD card into the Thrive and used CWM to install the .zip of the ROM I selected, and it won't install. It starts, then it says Installation aborted, but won't tell me why.
Any ideas where I should start unraveling this mystery?
Click to expand...
Click to collapse
also make sure you open the zip and place the update.zip on your card -
From my GSIII - jd's Stock/Rooted/Deodexed 4.3
Kyonex said:
1. check that your recovery is CWM and not stock recovery
2. check that you put on SD archive that contain folders named system and META-INF, file like boot.img, something other maybe (many ROMs archive contain "archive in archive", so you need to unpack archive from main archive and than put that internal archive on SD); after checking that all right try to flash that archive again
3. try another sdcard (full sized SDHC + formated in FAT32)
Click to expand...
Click to collapse
Excellent!
1) I had to extract "update.zip" from the ROM I had downloaded.
2) I re-formatted the card I was using to FAT32 instead of FAT.
3) I was able to get the install started with no trouble after following your directions.
BIG THANK YOU FOR THAT!
I got a successful install message, and then it booted!
Thanks a million!
Problems after Mount Changes
I changed the mount as described on thriveforums.org to allow apks and data to go to the external sd rather than "shared" internal memory.
I now have the situation with less free memory available on the sd card than on internal. The CWM backups went on the physical card- a 32 G one almost full. Will look for a major mfr 64 Gig.
One or so issues with the revised mounts where the external sd card is now internal. They relate to making backups with dalepl's latest CWM 6.0.1: where to put CWM backups for now and are they being made correctly with the revised mounts?
The backup made prior to the mount change looks normal: a single, dated/numbered folder about 2.6 Gb, 6 files: boot.img, cache.ext4.tar, data.ext4.tar, nandroid.md5, recovery.img and system.ext4.tar. However, the one made after the mount change also has a dated, numbered folder of only 15.8 Mb and 7 files: .android_secure.vfat.dup, boot.img, cache.ext4.dup, data.ext4.dup, nandroid.md5, recovery.img and system.ext4.dup. There is a second folder associated with the later bu called "blobs", which is huge --2.76 Gb, 3292 folders and 6581 files. Is this an expected result and any one think it might be a valid bu?
Also, it went on to the external SD (now "internal") and total storage use is now almost 28 Gb out of 30.2. I now have the situation with less free memory available on the sd card than on internal. The stuff there looks ok, pix movies and music plus CWM bups of 5.5 G and App_Backup_Restore archived apks at 2.8 Gb. So, I copied the cwm backups folder to the real internal memory, now sdcard2. I assume this true internal memory might get wiped during a restore so, this is not a valid storage site for this? And, if I put copies on a spare card, will that really work if my downloaded apps are on the original card, eg does the CWM backup copy the external card apps?
As I note, for some reason this 'blobs' folder won't copy easily to a USB via the Thrive or Win 7 pc. It also won't copy to a Win 7 HD partition where I store my Thrive stuff. (Update: I was able to do a wireless transfer to my pc and then, from there, to a spare SD card.)
Any thoughts? Should I go back and change the mounts to default?
BTW, I find FolderMount has no real use with the changed mount on the Thrive unless someone tells me otherwise. With the Thrive mounting the external card as internal, files go to the physical card.
gberpa,
I don't understand your question - it is very long. But I know that custom recovery (CWM / TWRP) itself remounts sdcard and internal memory before wipe process so it will wipe correct memory (only internal memory). If you need to change the ROM you don't need to worry about mounting paths because after wipe mounting paths will be restored to original.
Partition layout of Toshiba Thrive 10.1" ICS
AmEv said:
Also, do NOT use on the Thrive 7 or ANY of the Excites! The Thrive 7 has an entirely different bootloader/partition layout than the 10.
Click to expand...
Click to collapse
Can you give us information on the Toshiba Thrive 10.1" ICS partition layout and their names, please?
We would like to compare it to ours Toshiba Excite Pro (AT10LE-A, tostab12BA). A Dirty Cow enabled KingoRoot has given us a temporary root.
[Q] How Root Toshiba Excite Pro AT10LE-A-108 by dexxxZ
https://forum.xda-developers.com/showthread.php?t=2583677&page=6
Sent from my takee 1 using XDA Labs